300M Embedded WiFi Repeater / WiFi Router / WiFi Bridge WiFi-Room Quick Setting Guide

Size: px

Start display at page:

Download "300M Embedded WiFi Repeater / WiFi Router / WiFi Bridge WiFi-Room Quick Setting Guide"

Edmund Lamb
5 years ago
Views:

1 300M Embedded WiFi Repeater / WiFi Router / WiFi Bridge WiFi-Room Quick Setting Guide 1

2 Declaration Copyright 2015 Shenzhen HouTian Network Communication Technology Co.,Ltd. All Rights Reserved,with retained ownership. Without Shenzhen HouTian Network Communication Technology Co., Ltd written authorization, any company or personal can t copy, writer or translation part or all contents. Can t do commodity distribution for any commercial or profitable purposes by any ways (electricity, mechanical, photoprint, record or other methods). VONETS is the registered trademark of Shenzhen HouTian Network Communication Technology Co., Ltd. The other all trademarks or registered trademarks mentioned in this documents are belong to the individual owners. The product specifications and information technology mentioned in this manual are just for reference, if any updates,without other notice. Except for special agreements, this manual is just for user guidance, any statements, information and so on in this manual can t constitute the warranty of any forms. 2

3 Chapter 1 The installation instruction of WiFi-Room 1. Remove the three terminals, unscrew the screw in the terminals, and then insert the firewire and zero line to the appropriate location, finally tighten the screws on the terminals. As shown below: 2. Insert the 3 terminals to the original 3 terminals pin. Pay attention: Fire wire to L location, zero line to N location, as shown below: 3. Also, remove 4 terminals, connect the ethernet cable to the terminals according to the sequence, screw the screws, then insert 4 terminals to the original 4 pin location, pay attention the sequence R + R -T +T, as shown below: 3

4 Product picture, as shown below: 4

Chapter 2 Quick Setting Guide of Router Mode 1. Turn on WiFi-Room, it will power automatically. 2. Connect WiFi-Room Before setting WiFi-Room, please let notebook, smart phone, IPAD and other terminal devices to be connected to WiFi-Room.

5 Chapter 2 Quick Setting Guide of Router Mode 1. Turn on WiFi-Room, it will power automatically. 2. Connect WiFi-Room Before setting WiFi-Room, please let notebook, smart phone, IPAD and other terminal devices to be connected to WiFi-Room. The default WiFi SSID (WiFi Name) is: VONETS_the last six characters of product MAC address. The default password is : Remark: (1) If the computer is connected to WiFi-Room by wifi, please disable the local Area connection of the computer. (2) If the computer is connected to WiFi-Room by wired, please disable the Wireless Network Connection. (3) Set the computer network to Obtain an IP address automatically, as shown below: 3. Open the web page, input Virtual configuration domain name (VDNS) on the browser, then press enter into the loading page 5

to connect, need to enter User Name and Password provided by ISP, then click Apply to be ok, as shown below 6.

6 4. Enter user name and password Remark: the default user name and password is : admin 5. WAN Settings Enter the web page and click WAN Settings, select Connection Type, the default connection method is DHCP, if choose PPPoE to connect, need to enter User Name and Password provided by ISP, then click Apply to be ok, as shown below 6. LAN Settings Enter the web page, click LAN Settings, the default DHCP Server is Enable, as shown below: 7.WiFi Settings In Basic Settings, user can choose to Disable WiFi Network, revise WiFi Repeater (SSID) 6

WAN-LAN Interchange The factory default of Ethernet port is LAN port,

7 and Channel. In WiFi Security, user can revise Security Mode and Pass Phrase. 8. WAN-LAN Interchange The factory default of Ethernet port is LAN port, and Ethernet cable is WAN port, users can perform WAN-LAN interchange in configuration interface. Please check the picture as below: 7

appear automatically, can search the around WiFi Hot spots opened the SSID broadcast, as shown below: Remark:

8 Chapter 3 Bridge Mode Quick Setup Guide 1. WiFi Hotspots Open the configuration web page of WiFi-Room, after jumping the web page, the scan window will appear automatically, can search the around WiFi Hot spots opened the SSID broadcast, as shown below: Remark: About how to connect WiFi-Room and how to log in the configured web page, please check the above Router Mode Quick Setup Guide. Select a correct WiFi Hotspots and click Apply, as the shown below: 8

Remark: (1) After configured successfully, the WiFi name of the device is the name of source hot spot_the last two characters of MAC address, the password, encryption method and channel are the same

9 Enter the correct Pass Phrase (password), and make sure it is correct one, then click Apply button. After click Apply button, the above prompt will appear, The configured parameters have been saved successfully, please make sure the password input is correct, turn off and reboot the device. Remark: (1) After configured successfully, the WiFi name of the device is the name of source hot spot_the last two characters of MAC address, the password, encryption method and channel are the same as the source hot spot, the users can go to WiFi Repeater option to change SSID (WiFi name) and password. (2) After configured successfully, if you want to use the function of wired to wireless, please reset the device. Prompt 1: Switch Function The default factory mode is Repeater mode, user can change the mode by the following method, change the Operating mode of WiFi-Room: 1) When the switch is in R direction, WiFi-Room will be Router mode after WiFi-Room is powered on. 9

2) When the switch is in B direction, WiFi-Room will be Bridge mode after WiFi Room is powered on.

3) When the device is on, single press the button, the device will shutdown.

2)User can reset the device by the device button: (1) If the configured web page reset mode is Normal Reset, user can long press the button to reset,

10 2) When the switch is in B direction, WiFi-Room will be Bridge mode after WiFi Room is powered on. As shown below: Prompt 2: Button Function 1) When the device is off, single press the button, the device will boot. 3) When the device is on, single press the button, the device will shutdown. Prompt 3: The operation instruction of resetting 1) User can go to configured web page, click Reset button to restore the device. 2)User can reset the device by the device button: (1) If the configured web page reset mode is Normal Reset, user can long press the button to reset, the time will last 60 seconds for reset. (2)In Reset configuration interface mode selection "Hotel Reset" mode: long press the button about 3s then release, then quickly press the button twice, the device automatically enters the reset state, the reset process lasted about 60s. (3)The factory default is "Normal Reset"Mode. 10

VONETS VAR11N M Mini WIFI Router. 300Mbps Mini WiFi Router VAR11N-300. Quick Setup Guide

VONETS VAR11N M Mini WIFI Router. 300Mbps Mini WiFi Router VAR11N-300. Quick Setup Guide 300Mbps Mini WiFi Router VAR11N-300 Quick Setup Guide 1 Declaration Copyright 2015 Shenzhen HouTian Network Communication Technology Co.,Ltd. All Rights Reserved,with retained ownership. Without Shenzhen