14 Notebook PC WINBOOK CW140

Transcription

1 14 Notebook PC WINBOOK CW140 Quick Start Guide 1

2 I.System Layout Front Camera Charge/Power light Keyboard Touch Pad 2

3 Charge Indicator Charge Port USB Type-C Port USB Port SD Card Reader Power Button Headphone Port USB Type-C Port Top Cover Bottom Cover SSD Cover Speaker 3

4 Specifications Processor Intel Core i5-8250u Intel UHD Graphics 620 Memory 8GB DDR4 SSD 1st port support PCIE/SATA 2nd port SATA only 256GB SSD Preinstalled Wireless Intel 8265 onboard ac/a/b/g/n+bt4.2 Touchscreen 14" 1920*1080 IPS 10-point multi-touch Webcam 1.0MP Battery 7.6V/45WH Input/Output Speaker & Mic 1 x USB2.0 port 1 x Type-C (Full Function) 1 x Type-C (Data Only) 1 x Charge 1 x Micro-SD card slot Built-in Speaker x 2 Internal MIC x 2 AC-Adapter DC,19V/2.37A 4

5 Dimension (mm) 13.03in x 9.02in x.68in Weight 4.12 lb Applicant: International Products Sourcing Group Product: 14 Notebook PC Model: CW140 FCC ID: 2AOBMWBCW140 This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 5

6 FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by party responsible for compliance could void the user s authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/tv technician for help. Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This device has been tested against the FCC body SAR limit (1.6 W/kg). To comply with FCC RF exposure requirements, use the accessories should not contain metallic components in it's assembly. The use of accessories that do not satisfy these requirements may not comply with FCC RF exposure requirements and should be avoided. FCC RF warning statement: the device has been evaluated to meet general RF exposure requirement, The device can be used in portable exposure condition without restriction. To maintain compliance with FCC RF exposure requirements, use accessories that maintain a 0 cm separation distance between the user's body and the back of the handset. Note:indoor use only for MHz.