Model:NC H. Quick Start Guide. Protocol Identification: 1.DLNA ( / ) 2. AirPlay ( ) 3.Miracast

Transcription

1 联力胜科技 艾 宝 ipazzport cast Model:NC H Open ipazzport Cast Quick Start Guide Protocol Identification: 1.DLNA ( / ) 2. AirPlay ( ) 3.Miracast Thank you for purchasing the ipazzport ipazzcast Media Streaming Player. This is a brand new technology and the ipazzcast will work differently with different devices. DON'T GET FRUSTRATED! Please give us an and let us help you get the most out of your ipazzcast. We want to help! You can us directly at sales@unisenonline.com.cn. All inquires will be answered within 8 business hours.

2 1.Introduction Unisen ipazzport Cast is a mini engine to turn your Home HD Screen become a All Media Sharing Center by Smart phone or tablet or PC you already own. The ipazzport Cast is so tiny, so portable, don't leave it at home. You need it for sharing your favourite Video or lovely photos with family and friends. Just plug in ipazzport Cast to HD socket of the HD Screen set with at everywhere, family home, hotel room or business meeting room? Yes. You still need a local WiFi connection. ipazzport Cast is a fully Compatible to Android and ios and Windows operating system, Wi-Fi display technology, it supports DLNA, Airplay and Miracast Protocol which is enable to mirror or cast streaming video, pictures from your Smart phone or tablet onto HD Screen. ipazzport Cast Open Push Mini USB-Power HD HD Port Reset Switch 1 Mode Switch(DLNA, PBC and Miracast)

3 Model:NC H 2.iPazzPort cast HD screen 艾 宝 ipazzport cast Smart phone Table PC PC 2

4 3.Start up 3.1.Hold and push the HD port, then plug in the USB power cord 3.2.Hold the power cord near the USB port of ipazzport cast, then plug in the HD port to HD screen. Hold here 3

5 HD DLNA Mode HD Screen USB Power Device Name: SmartCast 852 Status: Mode: Local IP: Peer Device Name : Peer Device MAC: Peer Device IP: ipazzport_cast ipazzport_cast Airplay Waiting for connection... Miracast Browser Photo Smart Vision WiFi Display Network Music Video or Power Adapter (Recommended) 1.Turn on the HD Screen and change the video input to HD port. 2.Plug the ipazzport cast into the HD port of the HD Screen, if needed, please use a HD extension cable. 3.Connect one end of USB cable to the ipazzport cast, and the other end to the USB port of HD Screen 4.Some HD Screens can not provide enough power through USB port so we need to use a 5V/1A adapter. 5.Check if the HD screen shown above. 4

6 4.DLNA/AirPlay Mode: 4.1.Turn on your TV, you will see : SmartCast 852 IP: on the screen. 4.2.The ipazzport Cast will function as a WiFi Access Point (AP). Use your smart phone or tablet PC connects to the device AP, which SSID is the Device Name: SmartCast 852 (Refer to the TV screenshot below). DLNA Mode SmartCast 852 ipazzport_cast ipazzport_cast Airplay Waiting for connection... Miracast Browser Photo Smart Vision WiFi Display Peer Device Name : Network Music Video 4.3.Now we need to make the Dongle device connect to your home/office routers, so that your phone and Dongle device may access the Internet in the same time. 4.4.Enter the IP address " " (i.e. the Device IP0, as seen on TV) into your phone's browser, then click WiFi Setup >> WiFi Connection >> Choose the WiFi router >> Input password >> Click Submit >> Click OK. 5.Connect PC(Widows): Operating Steps:Donwload and Install Mirrorop >> Connection SmartCast 852" 6.Miracast / WiFi Display Mode: PBC Mode Miracast Waiting for connection,pbc mode Addr: AB.6F 5

7 6.1.Press the button on the side of device to switch the mode between Miracast / WiFi Display and DLNA / AirPlay Mode, until you see a Mode: PBC Mode(Miracast) on the TV screen. 6.2.For Android 4.2+Miracast enabled devices, such as Samsung Galaxy S4/Nexus 4/Nexus 7/Sony Xperia/LG Optimus G Pro, please turn on your smart phone or tablet PC and swipe down the Notification Bar on the top, then find the icons Miracast. (or Screen Mirroring for Samsung phones) Wait a moment until your smart phone or tablet PC shows a device found: SmartCast 00:78:05:04:AB:6F, then click "Yes" or "Accept" button. After that, your smart phone or tablet PC will show Connected, so that your phone or tablet has been connected with the device.then they can be interactive. 6.3.Some other phones may refer to the following instructions: - Turn on Settings >> More >> WLAN Display - Search for SmartCast 00:78:05:04:AB:6F. Click it and then Accept - Then your phone will show Connected 7.How to use DLNA with imediashare: 7.1.Please download a DLNAenabled playerappinto yourandroid, such as [imediashare], you can find it in Google Play Store. 7.2.Open imediashare APP, choose PERSONAL, and select the local video, picture or music file, then choose Dongle: SmartCast 852: DLNA Render under the option of [Choose a Screen] to play. As showed bellow. 8.How to use AirPlay: If your mobile device is an iphone/ipad, please follow the instruction below: 6