Smart Projector. P6 Projector

Size: px

Start display at page:

Download "Smart Projector. P6 Projector"

Melvin Pierce
6 years ago
Views:

1 Smart Projector P6 Projector Operation User Manual guidance P6

2 2 Introduction of appearance Enter Up Back Left Power Right Vent Reset Speaker Focus Adjustment Down TF Card Slot Speaker Dissipation Vent Vent Ear Jack Recharging Indicator Micro USB Recharging Interface

3 1.How to turn on/off 3 1.Click and hold the power button for 5 seconds to turn on or off the projector Power 2.Projection Focus/Brightness Adjustment Focus Adjustment 1.Roll clockwise or anti-clockwise the focusadjustment until having vivid projection image. 2.Go to Setting page,and then Brightness Setting to adjust projection

4 4 Recharging LED on for being recharged,while LED off for recharged fully. Recharging Indicator Micro USB Recharging Interface Specifications Brightness: 80 ANSI Lumens Screen Size: 5inch~120inch Projection Size:5-200 Resolution: VGA 640X480(Throw Ratio:4:3 Contrast Ratio:1000:1) Lamp life: 30,000hours Wireless connection: Wifi 2.4 Battery: Max 1.5hours use 8ohm/1w Speaker Other I/O interfaces:usb OTG,3.5mm Earphone jack Available Mirroring:Miracast,AirPlay,Windows External TF Card:Max 128G

5 Wifi Setting Go to Setting page,and then the Wi-Fi Setting.Pick up a network after all local connectivities are searched.connection would be showed on the right-top side,once password entered is right. 5 Setting i P6-6F7CSE Wi-Fi setting Brightness Setting Language Online Update i Device info Setting i P6-6F7CSE Ayhttp//: Setting i P6-6F7CSE Ayhttp//: Successfully connection would be showed here. Wi-Fi setting Searching... Brightness Setting Searching all available connectivities i Language Online Update Device info

6 6 Miracast Mirroring For Android Phones 1.Orimag P6 is only allowed to miracast the phones of Android 4.4 or above. Miracast would be renamed as Smartview or else instead of Miracast itself, depends on different phones. Enter Android/windows page and keep projector staying in this page,as showed below; Choose Android and will show the below menu is mirroning connecting Miracast Support for Android OS 4.2 or later i P6-6F7CSE Ayhttp//: G Aycodis 2.4G Wifi With a Miracast enabled Android device,you can mirror your contents to the projector Settings Wireless display Devices list Sound VPN p6 WLAN Miracast P6-XXXXXX A Display Language Airplane mode Mobile hotspot 1.Turn on Wi-fi 2.Go to display setting, enable Miracast 3.Select-P6-XXXXXX

7 Miracast connections--android mobile phone 7 2.Enable screen projection on phone.search local wifi hotspots to find out Orimag P6 s connectivity,commonly it is named as P6-******,and enter without password.here is done the connection between P6 and an Android Phone. (Note:The demostration phone is Meizu M463C.) Available Devices showing Projection screen P6-6F7C SE Connected Automatic Adjust P6-6F7CSE Screen Standby Text Size Miracast Support for Android OS 4.2 or later i P6-6F7CSE Ayhttp//: G Aycodis 2.4G Wifi Projection screen With a Miracast enabled Android device,you can mirror your contents to the projector Settings Sound WLAN Display A Language Wireless display VPN Miracast Airplane mode Mobile hotspot P6 P6-XXXXXX 1.Turn on Wi-fi 2.Go to display setting, enable Miracast 3.Select-P6-XXXXXX

8 8 Airpaly Mirroring for Iphones Here is done too the projection of the phone. Note:projection quality might be subjected to the connectivity.

9 Miracast Disconnection 9 Turn off screen projection on the phone,to quit the projection. Projection screen Projection screen P6-6F7C SE

10 10 Airpaly Mirroring for Iphones Enter the Apple page,and keep staying in this page. Airplay (ios II) Support ios 5.0 or latter i P6-6F7CSE Ayhttp//: G Aycodis 2.4G Wifi Casts IOS device s local images,videos or third party video data to the projector Both IOS device and projector are connected to your home WIFI iphone p6-xxxxxx Mirroring iphone p6-xxxxxx 1.Swipe up on control panel and press Airplay icon 2.Select P6-XXXXXX and enable Mirroring if you prefer And then third party video app that supports Airplay press Airplay icon.

11 Airpaly Mirroring for Iphones Search on phone the local wifi hotspots and find out Orimag P6 s connectivity,enter without password. Once the connection done,switch on Airplay Mirroring from the control panel on the phone.here comes the projection. 11 Airplay Done Airplay Done iphone cb100@164 P6-6F7CSE With AirPlay Mirroring youcan send everythingon your iphone s display to an AppleTV,wirelessly. iphone cb100@164 P6-6F7CSE Mirroring With AirPlay Mirroring youcan send everythingon your iphone s display to an AppleTV,wirelessly.

12 12 Airplay to quit connection 3.shut down mobile phone mirror output to quit connection AirPlay iphone P6-6F7CSE Mirroring With AirPlay Mirroring youcan send everythingon your iphone s display to an AppleTV,wirelessly.

13 OTG CONNECTION APPLE IPHONE 1. Turn on personal hotspot,slect "setting" on the desktop and then click "WIFI setting" to connect the personal hotspot. when connected successfully turn back to the desktop.pls keeping turn on the personal hotspot. 13 P6-6F7CSE Setting Ayhttp//: giPhone6 Click and connecting Wifi successfully connecting stafus Wi-fi setting Brightness Setting Language Online Update i i Device info

14 14 OTG CONNECTION APPLE IPHONE 2. Connect the projector with your phone by OTG cable, then select the "OTG" and click to turn the below right image.waitting for automatic connection caption as the below image shows. ios Notice:online video play will consume the Cellular data which cost will be collected by the prodder P6-6F7CSE Connected this info shows the projector connect to the phone successfully power Mobile phone mini projector Setting Bluetooth Celullar data network Personal hotspot Airplay Done iphone P6-xxxxxx Mirror airdrop airplay 1.To connect data cable as image shows(fenale port to connect to mobile phone) 2.Select"setting"-"celular data network "open"hotspot" 3.Push:open Airplay-select "hotspot"connect ahd done. click icon in playing video Minoting :open Airplay-select "hotspot" to open mirror and done

15 OTG CONNECTION APPLE IPHONE 15 3.Slide up from bottom of the phone and click the "Airplay" to use the mirroring function. P6-6F7CSE With AirPlay Mirroring youcan send everythingon your iphone s display to an AppleTV,wirelessly. Mirroring With AirPlay Mirroring youcan send everythingon your iphone s display to an AppleTV,wirelessly.

16 16 OTG to quit connection 4. Shut down mobile phone mirror output to quit connection. P6-6F7CSE Mirroring With AirPlay Mirroring youcan send everythingon your iphone s display to an AppleTV,wirelessly.

17 CONNECT TO WINDOWS SYSTEM Same Wi-Fi will be shared between the mobile phone and projector. 1.Select Windows from desktop to enter the interface as below right image shows 17 Windows Miracast i P6-6F7CSE Ayhttp//: G Aycodis 2.4G Wifi With a Miracast enabled Windows device, you can mirror your contents to the projector Project To Project,connect a diaplay. Second screen Project Add a wireless display PC and devlces Add devices Lock screen Add a devices Display Bluetooth Searching devices Devices P6-XXXXXX Typing Entertainment device Connecting to p6-xxxxxx

18 18 Connect to Windows system 2.To press Fn+F3 to open Copy and select other projection modes Select Projection--Computer Screen Only and search to connect the available projector device

19 Connect to Windows system 3.3.Searching and connect the projector device until it s projection successfully. 19

20 20 DLNA push 1.DLNA:to transfer local images videos or 3rd party video data to projector (need in the same Wi-Fi Router for smart device and projector ) 2.And otherwise,this device also can connect to Iphone cellular personal hotspot,and show the same screen when surfing on the phone net. DLNA i P6-6F7CSE http//: With DLNA,casts smart device s local images, videos or third party video data to the projector 1 2 Both smart device and projector are connected to your home WIFI or 1 2 Projector has been connected to your home WIFI,and smart device is connected to projector s WIFI In the third party app that supports DLNA, press DLNA and then select p6-xxxxxx

21 DLNA push 3.As the below picture shows.click the TV Screen Mirroring on the Vedio App.Please Note:Most Vedio App support the DLNA function(such as Tecent video, Thunder KANKAN, PPTV,YOUKU,SOHU video etc.),while still someapp does not support. 21

22 22 DLNA disconnection 3.To click quit projection or disconnect on mobile phone or click return button of projector to quit. Projecting P6-6F7CSE HD Change device

23 Player 23 To play videos and images from TF card or flash disk by selecting player Attention : To change volume size and forward or previous from projector as well as smart device. Media Player SD Card USB Disk

24 Precautions To prevent internal overheating,install the projector in a well-ventilated place Do not place anything near the projector that may block its air vents if the air vents are blocked,the internal temperature of the projector will increase. Be sure to prevent foreign objects such as paper debris from entering the projector. Do not install the projector in a hot or humid environment. Never open any cover on the projector.

4 Projector Features DMD FEATURE. Light Source & Lifespan: OSRAM. Market brightness: LED(R.GB) Q8 (Up to 30,000 hours) 500 Lumens

User Manual defective 02 4 Projector Features DMD FEATURE Display Technology: DLP(0.3" 720P DMD) Resolution: 1280*720 (support 1080p video) Market brightness: Light Source & Lifespan: OSRAM 500 Lumens