Chonghan CH-M2 Wireless Modem User manual

Transcription

1 Chonghan CH-M2 Wireless Modem User manual Chonghan Wireless Modem Series User manual 6/2/2016 Chonghan Co., Ltd. Lei Dongdong

2 崇瀚科技 Chonghan Power by Chonghan

3 Important Notice Due to the nature of wireless communications, transmission and reception of data can never be guaranteed. Data may be delayed, corrupted (i.e., have errors) or be totally lost. Although significant delays or losses of data are rare when wireless devices such as the Chonghan Wireless device are used in a normal manner with a well constructed network, the Chonghan Wireless device should not be used in situations where failure to transmit or receive data could result in damage of any kind to the user or any other party, including but not limited to personal injury, death, or loss of property. Chonghan Wireless accepts no responsibility for damages of any kind resulting from delays or errors in data transmitted or received using the Chonghan Wireless device, or for failure of the Chonghan Wireless device to transmit or receive such data. Safety and Hazards Do not operate the Chonghan Wireless device in areas where blasting is in progress, where explosive atmospheres may be present, near medical equipment, near life support equipment, or any equipment which may be susceptible to any form of radio interference. In such areas, the Chonghan Wireless device MUST BE POWERED OFF. The Chonghan Wireless device can transmit signals that could interfere with this equipment. Do not operate the Chonghan Wireless device in any aircraft, whether the aircraft is on the ground or in flight. In aircraft, the Chonghan Wireless device MUST BE POWERED OFF. When operating, the Chonghan Wireless device can transmit signals that could interfere with various airborne systems. Note: Some airlines may permit the use of cellular phones while the aircraft is on the ground and the door is open. Chonghan Wireless device may be used at this time. The driver or operator of any vehicle should not operate the Chonghan Wireless device while in control of a vehicle. Doing so will detract from the driver or operator s control and operation of that vehicle. In some states and provinces, operating such communications devices while in control of a vehicle is guilty. Limitations of Liability This manual is provided as is. Chonghan Wireless makes no warranties of any kind, either expressed or implied, including any implied warranties of merchantability, fitness for a particular purpose, or infringement. The recipient of the manual shall endorse all risks arising from its use. The information in this manual is subject to change without notice and does not represent a commitment on the part of Chonghan Wireless. Chonghan WIRELESS AND ITS AFFILIATES SPECIFICALLY DISCLAIM LIABILITY FOR ANY AND ALL DIRECT, INDIRECT, SPECIAL, GENERAL,

4 INCIDENTAL, CONSEQUENTIAL, PUNITIVE OR EXEMPLARY DAMAGES INCLUDING, BUT NOT LIMITED TO, LOSS OF PROFITS OR REVENUE OR ANTICIPATED PROFITS OR REVENUE ARISING OUT OF THE USE OR INABILITY TO USE ANY Chonghan WIRELESS PRODUCT, EVEN IF Chonghan WIRELESS AND/OR ITS AFFILIATES HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR THEY ARE FORESEEABLE OR FOR CLAIMS BY ANY THIRD PARTY. Notwithstanding the foregoing, in no event shall Chonghan Wireless and/or its affiliates aggregate liability arising under or in connection with the Chonghan Wireless product, regardless of the number of events, occurrences, or claims giving rise to liability, be in excess of the price paid by the purchaser for the Chonghan Wireless product. Copyright Chonghan Co., Ltd. All rights reserved. Trademarks Chonghan is filed or registered trademark of Chonghan Co., Ltd. in P.R.China and/or in other countries. Windows is a registered trademark of Microsoft Corporation. QUALCOMM is a registered trademark of QUALCOMM Incorporated. Used under license. Other trademarks are the property of the respective owners. Contact Information Company Sales Desk Post Web Chonghan Co., Ltd. Phone +86 (755) Hours 8:30 AM to 6:00 PM GMT+8 sales@szchonghan.com FAX +86 (755) x 805 Floor 2,Building 14, Nangang First Industrial Area, Songbai Road, Nanshan District, Shenzhen, Guangdong, China (518000)

5 Contents Important Notice... 3 Safety and Hazards... 3 Limitations of Liability... 3 Copyright... 4 Trademarks... 4 Contact Information... 4 Overview... 6 Document History... 6 References... 6 Abbreviations... 6 Produclist... 7 Introduction... 8 Features... 8 Specification... 8 Application... 9 Device Connection Install Driver Uninstall Driver Dial Up Phone and Modem Option Add Connection Dial Up APN/VPDN Setting APN Setting VPDN Setting Hyper Terminal Setting AT Command AT Command Rule Commonest Command SMS Function CH-M2G5H5 SMS Function CH-M2G5H5 Query SMS Center CH-M2G5H5 ASCII Message CH-M2G5H5 PDU Message CH-M2G5H5 Message Relate Command CH-M2G5H5 Receive SMS Unicode simple description Product List... 47

6 Overview This user guide describes the M1 series wireless modem. The aim of the manual is to ease the test, install and disposition. Note: Though all features are documented in this manual, new features may still be in beta stage at publication and therefore may not yet be validated. Please refer to the Customer Release Note for complete and detailed information regarding beta and validated features at time of release. Document History Version Date Comments Author Initial Release Version Samuel Modify the received SMS description Samuel Update the contact information Samuel Update the products list Samuel Add CH-M2T2Z7 product Samuel Add CH-M2G5Z9 product Samuel Add CH-M2C3Z8 product Change contact Cai Jinyong Change address Cai Jinyong Add 4G dial description Lei Dongdong References CHONGHAN CHM2 WIRELESS MODEM QUICKSTART ENG CHONGHAN CHM2G5H5 HSUPA MODEM DATASHEET ENG CHONGHAN CHM2G5L2 HSUPA MODEM DATASHEET ENG CHONGHAN CHM2G5Z9 HSUPA MODEM DATASHEET ENG CHONGHAN CHM2G6H9 HSPA+ MODEM DATASHEET ENG CHONGHAN CHM2C3H2 EVDO MODEM DATASHEET ENG CHONGHAN CHM2C3Z8 EVDO MODEM DATASHEET ENG CHONGHAN CHM2T2H1 TD-HSDPA MODEM DATASHEET ENG CHONGHAN CHM2T2Z7 TD-HSDPA MODEM DATASHEET ENG Abbreviations APN Access Point Name

7 DAC GGSN GPRS IP KB MCC MNC MS PDU PLMN RSSI SMA SMS Digital Analog Converter Gateway GPRS Support Node General Packet Radio Service Internet Protocol Kilobyte Mobile Country Code Mobile Network Codes Mobile Station Protocol Data Unit Public Land Mobile Network Received Signal Strength Indication Small Adapter Short Message Services Product list Product Description CH-M2G5H5-400 HSUPA USB 2.0 Type B Female CH-M2G5L2-410 HSUPA USB 2.0 Type B Female RS232 DB9 CH-M2G5Z9-400 HSUPA USB 2.0 Type B Female CH-M2G6H9-400 HSPA+ USB 2.0 Type B Female CH-M2C3H2-400 EV-DO USB 2.0 Type B Female CH-M2C3Z8-400 EV-DO USB 2.0 Type B Female CH-M2T2H1-400 TD-HSDPA USB 2.0 Type B Female CH-M2T2Z7-400 TD-HSDPA USB 2.0 Type B Female CH-M2G7 LTE USB 2.0 Type B Female

8 Introduction With the development of wireless communication technologies, wireless products are being adopted in numerous industrial and civilian fields. Shenzhen Chonghan Co., Ltd. a leader of wireless communication equipment manufacturer releases the CH-M1 Series Wireless Modems, which support various frequency bands of WCDMA / CDMA 2000 / TD-SCDMA, and provide industrial terminal solutions for 3G communication. As a wireless modem, it support AT command set via USB interface. CH-M2 series wireless modem adopts industrial level modules, specially designed for the complicated industrial environment which compatible with EMC, and will be your best choose of wireless communication. Features AT command interface Support WCDMA / CDMA 2000 / TD-SCDMA Support Voice, SMS and CSD Dial up, data communication Support APN or VPDN LED: power, cell Interface level: USB Watchdog(software and hardware) Steel shell for anti-electromagnetic interference Specification Product Network Work Temp Humidit y Size CH-M2G5H5-40 HSUPA 850MHz -10 C~+65 5%~90% 110x70x MHz C 5 mm 1900MHz 2100MHz CH-M2G5L2-41 HSUPA 850MHz -20 C~+55 5%~95% 110x70x MHz C 5 mm 2100MHz CH-M2G5Z9-40 HSUPA 850MHz -20 C~+70 0%~95% 110x70x MHz C 5 mm 1900MHz 2100MHz CH-M2G6H9-40 HSPA+ 850MHz -10 C~+55 5%~95% 110x70x MHz C 5 mm Weigh t 200g 200g 200g 200g

9 1900MHz 2100MHz CH-M2C3H2-40 EV-DO 800MHz -10 C~+55 5%~95% 110x70x2 200g MHz C 5 mm CH-M2C3Z8-40 EV-DO 800MHz -20 C~+65 0%~95% 110x70x2 200g MHz C 5 mm CH-M2T2H1-40 TD-HSDP 900MHz -10 C~+55 5%~95% 110x70x2 200g 0 A 1800MHz C 5 mm 1900MHz 2100MHz CH-M2T2Z7-40 TD-HSDP 900MHz -10 C~+75 0%~95% 110x70x2 200g 0 A 1800MHz C 5 mm 1900MHz 2100MHz CH-M2G7 LTE LTE: -20 C~+70 5%~95% 110x70x2 240g 1/3/7/38/39/40/4 C 5 mm 1 WCDMA: 1/2/5 EVDO: BC0 TD-SCDMA: 34/39 CDMA: BC0 GSM: 5/8/3/2 Application Remote Data Monitor and Control Water, gas and oil flow metering AMR (automatic meter reading) Power station monitoring and control Remote POS (point of sale) terminals Traffic signals monitor and control Fleet management Power distribution network supervision Central heating system supervision Weather station data transmission Hydrologic data acquisition Vending machine Traffic info guidance Parking meter Telecom equipment supervision (Mobile base station, microwave or optical relay station) Oil field data acquisition Warehouse supervision

10

11 Device Connection LED Description Power ON Device running. OFF Device shut down. Cell ON Cell network successful register. OFF Cell network did not register. Interface Description Antenna 50Ω/SMA/Female SIM 3.3V/1.8V Power Φ 5.5mm/2.5mm, 5~25V ( suggest 12V ) USB Port USB 2.0 Type B Female Serial Port (Only for RS-232 DB9 CH-M2G5L2-410) Assemble the antenna, power adapter, connect the modem to PC via RS-232 serial cable, open the back cover, insert SIM/UIM card, at last, power on. Note: Don t insert or remove the SIM/UIM card in the power on status.

12 Install Driver Execute the Setup.EXE Click the Next button.

13 Click the I Agree button. Click the Install button.

14 Waiting the progress. Click the Finish button.

15 Open the device management. As the picture, 3 HUAWEI USB controller and 3 HUAWEI device will display.

16 Uninstall Driver Run the uninstall driver from Start Menu or Control panel add and remove programs. Click Yes for confirm to remove the driver. Click Uninstall.

17 Waiting the driver removing. Click the Finish.

18 Dial Up Follow is the dial up instance, use the Windows XP environment. Phone and Modem Option My Computer Control Panel Phone and Modem Options

19 Open the HUAWIE Mobile CMCC Modem properties, Advanced tab. Open tab Advanced, fill the extra initialization commands Product Extra initialization command Notes CH-M2G5H5 AT+CGDCONT=1, IP, UNINET Default setting by China Unicom CH-M2G5L2 CH-M2G5Z9 CH-M2G6H9 CH-M2C3H2 AT&D2 Default setting by China Telecom CH-M2C3Z8 CH-M2T2H1 AT+CFUN=1;+CGDCONT=1, IP, CMNET Default setting by China Mobile CH-M2T2Z7 CH-M2G7 none China Mobile,Unicom Telecom can

20 (CH-M2G5H5 / CH-M2G5L2 / CH-M2G5Z9 / CH-M2G6H9)

21 (CH-M2G7)

22 (CH-M2C3H2 / CH-M2C3Z8)

23 (CH-M2T2H1 / CH-M2T2Z7)

24 (CH-M2G7) Add Connection

25 Open the Network Connections Create a new connection Click next

26 Choose connect to the internet Set up my connection manually

27 Connect using a dial-up modem Chonghan CH-M2 Wireless Modem User manual

28 Type the name of ISP (CH-M2G5H5 / CH-M2G5L2 / CH-M2G5Z9 / CH-M2G6H9 / CH-M2T2H1 / CH-M2T2Z7)

29 (CH-M2C3H2 / CH-M2C3Z7) Input the Phone number. Product Phone Number Notes CH-M2G5H5 *99***1# Default setting by China Unicom CH-M2G5L2 CH-M2G5Z9 CH-M2G6H9 CH-M2C3H2 #777 Default setting by China Telecom CH-M2C3Z8 CH-M2T2H1 *99***1# Default setting by China Mobile CH-M2T2Z7 CH-M2G7 *98# China Mobile,Unicom and Telecom can

30 (CH-M2G7) (CH-M2G5H5 / CH-M2G5L2 / CH-M2G5Z9 / CH-M2G6H9 / CH-M2T2H1 / CH-M2T2Z7)

31 (CH-M2C3H2 / CH-M2C3Z7) Product User name Password Notes CH-M2G5H5 WAP WAP Default setting by China Unicom CH-M2G5L2 CH-M2G5Z9 CH-M2G6H9 CH-M2C3H2 card card Default setting by China Telecom CH-M2C3Z8 CH-M2T2H1 WAP WAP Default setting by China Mobile CH-M2T2Z7 CH-M2G7 none none China Mobile,Unicom and Telecom can

32 Click Finish button. Chonghan CH-M2 Wireless Modem User manual

33 Type the ISP account name and password, WAP / WAP for CH-M1G2 in the China Mobile and card / card for CH-M1C1 in the China Telecom. Finish.

34 Dial Up (CH-M2G5H5 / CH-M2G5L2 / CH-M2G5Z9 / CH-M2G6H9 / CH-M2T2H1 / CH-M2T2Z7)

35 (CH-M2G7)

36 (CH-M2C3H2 / CH-M2C3Z7) Click Dial, then the connection will establish automatically.

37 APN/VPDN Setting APN Setting This setting is for CH-M2 APN. The APN is special parameter provide by ISP. Product Extra initialization commands Notes CH-M2G5H5 AT+CGDCONT=1, IP, UNINET Take place the UNINET by APN CH-M2G5L2 CH-M2G5Z9 CH-M2G6H9 CH-M2T2H1 CH-M2T2Z7 AT+CFUN=1;+CGDCONT=1, IP, CMNET Take place the CMNET by APN (CH-M2G5H5 / CH-M2G5L2 / CH-M2G5Z9 / CH-M2G6H9)

38 (CH-M2T2H1 / CH-M2T2Z7) VPDN Setting This setting is for CH-M2 VPDN. The VPDN have special user name and password, which provide by the ISP. Product User name Password CH-M2C3H2 VPDN user name VPDN password CH-M2C3Z8

39 (CH-M2C3H2 / CH-M2C3Z8)

40 Hyper Terminal Setting Open the Hyper Terminal Windows start menu all programs Accessories Communications Hyper Terminal Enter the name of the connection.

41 Choose the communication port. Setting the port properties. Note: the Chonghan Wireless Modem port properties factory default is /8/n/1/0, as above picture.

42 Call Disconnect Properties Port parameters After setting, the Hyper Terminal window as above. Click call button, the Hyper Terminal is ready for operate.

43 AT Command AT Command Rule AT<CR> AT+XXX=YYY<CR> AT+XXX?<CR> AT&F<CR> AT&W<CR> // return OK // setting parameter // query parameter // restore Modem parameters to factory default // save parameters Note: the AT command not case-sensitive, prefix by at and terminate by <CR> Commonest Command AT+CSQ<CR> // signal query AT+IPR?<CR> // query device baud rate AT+IPR=115200<CR> // baud rate setting, support /57600/38400/19200/9600/4800/2400/1200 ATD ; <CR> // voice call ATD <CR> // data call ATA<CR> // incoming call answer +++ // switch data mode to command mode ATO<CR> // switch command mode back to data mode ATH<CR> // hang up

44 SMS Function CH-M2G5H5 SMS Function The follow section fit for : CH-M1G1S1100, CH-M1G2S2100, CH-M1G2N1100 CH-M2G5H5 Query SMS Center AT+CSCA<CR> // query the SMS center number which auto get from network +CSCA : , 145 OK CH-M2G5H5 ASCII Message AT+CSCS="GSM"<CR> // setting SMS character set OK AT+CMGF=1<CR> // setting SMS format OK AT+CMGS= <CR> // destination number > // message by ASCII sets, terminate character means CTRL+Z(0X1A) +CMGS:NNN // message stamp OK Note: if no message stamp return, please resend the message again CH-M2G5H5 PDU Message AT+CSCS="UCS2"<CR> // setting SMS character set OK AT+CMGF=0<CR> // setting SMS format OK AT+CMGS=22<CR> // PDU length ( Byte ), exclude the initial 00 and terminate character <0x1a> > B F20008A <0x1A> // Unicode code, content ABCD, end by (0X1A) +CMGS:NNN // responded message reference OK

45 Note: if no message stamp return, please resend the message again CH-M2G5H5 Message Relate Command AT+CMGF=1<CR> AT+CMGL= ALL <CR> AT+CMGR=n<CR> AT+CMGD=n<CR> // setting ASCII mode // query the SMS list // read the SMS, location value is n // delete the SMS, location value is n CH-M2G5H5 Receive SMS AT+CPMS=MT,MT,MT<CR> // Preferred SMS message storage AT+CSMS=1<CR> // Select Message Service +CSMS: 1, 1, 1 OK Receive SMS Indication AT+CNMI=1,1<CR> // New SMS message indications setting OK +CMTI : MT,1 // New SMS message indications AT+CMGR=1<CR> // read SMS +CMGR: 0, Receive SMS auto display AT+CNMI=2,2<CR> // New SMS message indications setting OK +CMT : *******,, 04/06/26 // auto display the new SMS Hello AT+CNMA<CR> // new SMS acknowledge OK Note: in the auto display mode, there is the AT+CNMA must sent after received the new SMS

46 Unicode simple description Type Initial Destination Ext Length Content Sample B F A

47 Product List Name Unit Quantity Describe Picture CH-M2 Item 1 Device Power Adapter Item 1 DC 12V1A USB Cable Item 1 Standard Supply Antenna Item 1 Standard Supply