Achieving superior quality in sound, vibration and speech. Research Development Engineering Consulting ACQUA CONFIGURATION EXAMPLES

Transcription

1 Achieving superior quality in sound, vibration and speech Research Development Engineering Consulting ACQUA CONFIGURATION EXAMPLES

2 ACQUA Advanced Communication Quality Analysis The Advanced Communication Quality Analysis system ACQUA is a dual channel signal analyzer and signal generator optimized for telecommunication measurements. ACQUA is a data acquisition, measurement and analysis system for nearly all applications in tele communications. ACQUA is suitable for measure ments and analysis of terminal equipment, network components, answering machines and complete point-to-point measurements of single networks or network configurations. In addition to meeting the requirements of international standards such as ITU-T, ETSI, 3GPP, TIA CTIA, GSMA and IEEE, ACQUA provides a wide variety of special measurements and evaluations ne cessary for the development of modern telecommunication equipment. When combining ACQUA with the head and torso simulator HMS II.3 II.6, very realistic measurement setups can be achieved allowing highly authentic simulation of real use scenarios. An outstanding feature is the ability for auditive evaluation of different test situations. ACQUA has three main fields of application: Automated data acquisition and analysis of standard measurements for terminal equipment and transmission lines of bandwidth up to almost 20 khz Analysis of transmission systems with non-linear, time-variant transfer characteristics Experimental development and optimization of terminal equipment, networks and network components When connected to the different front ends for signal conditioning, measurement of almost all equipment in the field of telecommunications is possible: and digital telephones with handset (narrowband, wideband, super-wideband, fullband) and digital hands-free equipment and conference systems (mobile, office, car...) 2 ACQUA Configuration Examples

3 and digital cordless telephones and mobile telephones (VoLTE, UMTS, GSM, DECT, CDMA...) Network components like speech echo cancellers, digital circuit multiplication equipment (DCME), gateways... Audio-related systems in a vehicle (emergency call systems, in-car communication systems...) Key Features of ACQUA Expandable system solution for measuring acoustics and network access for different telephony scenarios: Voice over LTE (VoLTE), UMTS, GSM, CDMA Hands-free (mobile, office, car...) Voice over IP () Echo Cancellers (EC) Telephony and Network Access Digital Telephony Cordless (DECT) Headsets (intra concha, supra concha...) Electroacoustics Bluetooth Setups Hearing Aids Emergency Call Systems (ecall) In-Car Communication Systems (ICC) Automatic Speech Recognition Systems (e.g. head unit in car, Internet of Things (IoT), television, home automation system) Complete range of analysis possibilities Predefined test cases for fast, automated measurements according to international standards Automatic report generation Possibility to build custom standards and measuring sequences Data base for archiving time signals, transfer functions, test results and test conditions Measurements with any test signals Outstanding possibilities for signal preparation and manipulation to optimize quality Auditive evaluation of measurement objects, especially important for non-linear, time-variant systems A/B comparison of different measurement objects ACQUA Configuration Examples 3

4 Mobile Telephony ( I/O required; Must be calibratable) RF (Mobile Phone) HMS II.3 with HHP III.1 or HHP IV (Mobile Phone) RF Bluetooth MFE XI Hands-Free Profile or Headset Profile or A2DP Sink or aptx Device under Test Relevant Standards Available Mobile Phone (GSM, UMTS, CDMA, AMPS) 3GPP TS GPP TS TS (6742) TS (6777) (6462) 3GPP TS GPP2 C.S0056 CTIA Certification Program Test Plan Deutsche Telekom AG Test Specifications for NB/ WB Terminals EN ETSI ETS ETSI ES ETSI ES ETSI TS ETSI TS ETSI TS ITU-T G.160 Vodafone Performance TST Audio Quality (NB/WB) C.S0056 (6788) CTIA (6781) VFTST Audio-NB (60009) UG VFTST Audio-WB (60010) HQS-Mobile-II (60011) HQS-Mobile-Additions-II (60012) DTAG-Mobile-NB (60013) UG DTAG-Mobile-WB (60014) GSMA HD Voice (60018) TS /38 (60019) (NB-Mobile-Phones) TS /40 (60020) (WB Mobile Phones) VZW VoLTE (60023) VZW 1X CDMA (60029) CTIA-2014 (60036) HMS II.3-33 with Pinna type 3.3 (1230.1) HHP IV (1406) or HHP III.1 (1403) Radio Communication Tester 3PASS lab (6990) or HAE-BGN (6971) with Optional: MFE XI (6482) with option MFE XI-EXT (6492) HIS L (1231) TOSQA (ACOPT 10, 6820) 3QUEST (ACOPT 21, 6844) POLQA (ACOPT 30, 6857) Speech-based Double Talk (ACOPT 32, 6859) HIB I (6002) 4 ACQUA Configuration Examples

5 LTE Mobile Telephony HMS II.3 with HHP III.1 or HHP IV MFE VIII.1 Ethernet () RF (LTE/4G) Device under Test Relevant Standards Available VoLTE Phone 3GPP TS TS (6777) 3GPP TS UG TS 26 SWB/FB (60028) HMS II.3-33 with 3GPP TS GSMA HD Voice (60018) Pinna type 3.3 (1230.1) ETSI ES VZW VoLTE (60023) HHP IV (1406) or HHP III.1 (1403) ETSI ES (6462) with ETSI TS ETSI TS MFE VIII.1 (6484) incl. ETSI TS Cod-AMR (6485), Cod-EVS ITU-T G.160 (6495), MFE VIII.1-IMP (6496) 3PASS lab (6990) or HAE-BGN (6971) with 3QUEST (ACOPT 21, 6844) SNRI & TNLR calculation acc. to ITU-T G.160 (ACOPT 28, 6855) POLQA (ACOPT 30, 6857) Speech-based Double Talk (ACOPT 32, 6859) LTE Radio Communication Tester ACQUA Configuration Examples 5

6 Telephony Phone Test SIP Server (if required by ) MFE VIII.1 (Ethernet) MFE IX optional (Ethernet) (Ethernet/WLAN) HMS II.3 with HHP IV or HHP III.1 ( Phone) Device under Test Available IP Terminal HQS-IP (6769) Optional: IP Gateway IP Echo Canceller IP Network DCME Relevant Standards ETSI EG ETSI ES ETSI ES ETSI TS ITU-T G.122 ITU-T G.131 TIA-810 (6772) TIA-920 (6783) TIA B (60041) G.168 (6750) FZ TSEC (6751) FZ TSEC-L (6779) HQS-EC (6774) HQS-IP-Phones (6787) ES /38 (6795) ES /40 (6796) TS /925 (60035) HMS II.3-33 with Pinna type 3.3 (1230.1) HHP IV (1406) or HHP III.1 (1403) HPO (6473) (6462) with MFE VIII.1 (6484) with Cod-AMR (6485) MFE IX (6480) or MFE VIII.1-IMP (6496) MFE X (6481) MFE XI (6482) SLVM.56 (ACOPT 09, 6819) 3PASS lab (6990) or HAE-BGN (6971) with TOSQA (ACOPT 10, 6820) PESQ (ACOPT 16, 6836) Relative Approach (ACOPT 17, 6839) 3QUEST (ACOPT 21, 6844) POLQA (ACOPT 30, 6857) ITU-T G.168 ITU-T P.340 TIA 810 TIA 920 ANSI/TIA B 6 ACQUA Configuration Examples

7 Headset / Mobile Headset Interface Audio Gateway (CVSD or msbc*) or A2DP Source (SBC or aptx*) (Accessory) MFE XI Bluetooth HMS II.3 * MFE XI-EXT required HMS II.3 with (Headset) HIB I (Mobile Phone) RF HIB I Device under Test Available Headset Relevant Standards EN ITU-T P.360 (acoustic shock) ITU-T P.380 (electroacoustic) ITU-T P.381 HQS-MP3 (6784) EN (6789) P.381 (60005) HMS II.3-33 (1230.1) with HIS L (1231) (6462) with MFE XI (6482) with option MFE XI-EXT (6492) SLVM.56 (ACOPT 09, 6819) HIB I (6002) POLQA (ACOPT 30, 6857) Radio Communication Tester Optional: 3PASS lab (6990) or HAE-BGN (6971) with 3QUEST (ACOPT 21, 6844) ACQUA Configuration Examples 7

8 Hands-Free Telephony (Mobile Phone Type) Available for and Digital Terminals Optional but Recommended for 4G Measurements MFE VIII.1 with MFE VIII.1-IMP Ethernet RF (Mobile Phone in Hands-free Mode) HMS II.3 Device under Test Relevant Standards Available Hands-Free Telephone (mobile phone type) 3GPP TS GPP TS CTIA 2014 EN ETSI ES ETSI TS ETSI TS ITU-T P.340 ITU-T P.341 ITU-T P.342 ITU-T P.501 ITU-T P.502 ITU-T P.581 TS (6777) UG TS 26 SWB/FB (60028) VFTST Audio-NB (hands-free part, 60009) UG VFTST Audio-WB (hands-free part, 60010) HQS-Mobile-II (hands-free part, 60011) HQS-Mobile-Additions-II (hands-free part, 60012) DTAG-Mobile-NB (hands-free part, 60013) UG DTAG-Mobile-WB (hands-free part 60014) CTIA-2014 (60036) HMS II.3-33 (1230.1) with HIS L (1231) or HMS II.6 (1389) (6462) with MFE VIII.1 (6484) incl. Cod-AMR (6485), Cod-EVS (6495), MFE VIII.1-IMP (6496) 3PASS lab (6990) or HAE-BGN (6971) with TOSQA (ACOPT 10, 6820) 3QUEST (ACOPT 21, 6844) SNRI & TNLR calculation acc. to ITU-T G.160 (ACOPT 28, 6855) Radio Communication Tester 8 ACQUA Configuration Examples

9 Hands-Free Telephony (Car) Adapter CUU I Front AES / EBU labbgn () Subwoofer Rear Front AES / EBU labbgn MFE XI Subwoofer Alternative Setup (Simplified) Rear Device under Test Available Car Hands-Free Terminal (Head Unit) Relevant Standards VDA-HFT (6770) P.1100 (6797) P.1110 (6798) P.1120 (60043) HQS-HFT (6766) HMS II.3-33 (1230.1) with HIS L (1231) or HMS II.6 (1389) (6462) with POLQA (ACOPT 30, 6857) Speech-based Double Talk (ACOPT 32, 6859) Radio Communication Tester ITU-T P.340 ITU-T P.1100 ITU-T P.1110 ITU-T P.1120 ITU-T P.1130 VDA Specification for Car Hands-Free Terminals MFE XI (6482) with option MFE XI-EXT (6492) 3PASS flex (6995) with TOSQA (ACOPT 10, 6820) Relative Approach (ACOPT 17, 6839) 3QUEST (ACOPT 21, 6844) Optional: PESQ (ACOPT 16, 6836) Quality Pie (ACOPT 20, 6843) ACQUA Configuration Examples 9

10 Background Noise Simulation 3PASS lab Further MFEs or Radio Tester Pulse L (I) labbgn Adapter CUU I Device under Test Relevant Standards Available Any Terminal with a Noise Canceller ETSI TS PASS lab (6990) with labbgn (6486) MSA I (6487) HMS II.3-33 with Pinna type 3.3 (1230.1) HHP IV (1406) or HHP III.1 (1403) (6462) with CUU I (6085) 10 ACQUA Configuration Examples

11 3PASS flex Background Noise Simulation Adapter CUU I Front SQuadriga II CLD VII.6 labbgn HEADlink Pulse Pulse () Subwoofer Radio Communication Tester Rear Device under Test Relevant Standards Available Multi-Microphone System Microphone Array Beamforming Microphone Car Hands-free System In-Car Communication (ICC) System Television Conference System Internet of Things (IoT) Device Home Automation System ITU-T P.1100 (Annex F) ITU-T P.1110 (Annex F) ITU-T P.1120 (Annex F) ITU-T P.1140 (Annex B) 3PASS flex (6995) with labbgn (6486) HMS II.3-33 with Pinna type 3.3 (1230.1) (6462) with SQuadriga II (3320) CLD VII.6 (3356) CUU I (6085) Radio Communication Tester ACQUA Configuration Examples 11

12 Background Noise Simulation HAE-BGN Pulse L (I) (* PSB III only required for synchranization of non-stationary noise) Front labbgn Further MFEs or Radio Tester Subwoofer Rear Device under Test Any Terminal with a Noise Canceller Relevant Standards ETSI EG Available (6462) HAE-BGN (6971) with labbgn (6486) HMS II.3-33 with Pinna type 3.3 (1230.1) DSB II (2406) or DSB III (2407) or DSB IV (2408) CUU I (6085) Further MFEs or Radio Communication Tester 12 ACQUA Configuration Examples

13 Mobile, & DECT Hearing Aid Compatibility RF Electromagnetic HMS II.3 HAC II (Mobile Phone) MFE VIII.1 HAC II Electromagnetic ( Phone) HMS II.3 MFE X DECT HAC II Electromagnetic HMS II.3 (DECT Phone) Device under Test Hearing-Aid-Capable Handset Relevant Standards ANSI C63.19 ETSI ES FCC 47CFR CH /317 ITU-T P.370 TIA-1083-B Available HAC-Suite (60021)* * contains measurements according to all hearing aid compatibility standards listed under Relevant Standards HAC II (6594) (6462) MFE VIII.1 (6484) MFE X (6481) HMS II.3-33 with Pinna type 3.3 (1230.1) HHP IV (1406) Radio Communication Tester ACQUA Configuration Examples 13

14 Automatic Emergency Call (ecall) Pulse PSB III AES / EBU AES / EBU Front In-Vehicle Emergency Call System AES / EBU labbgn () Subwoofer Rear Device under Test Relevant Standards Available Emergency Call System Interstate Standard GOST ITU-T P.1140 (Annex B) GOST NB (60030) UG GOST WB (60032) P.1140 (60038) HMS II.3 with Pinna type 3.3 (1230.1) or Pinna type 3.4 (1230.2) and HIS L (1231) (6462) with 3PASS flex (6995) or HAE-car (6970) with Radio Communication Tester Optional: TOSQA (ACOPT 10, 6820) 14 ACQUA Configuration Examples

15 In-Car Communication (ICC) Adapter CUU I Front AES / EBU labbgn In-Car Communication System Power Amplifier Rear Electrical Noise Mixer Noise In-Car Communication System Power Amplifier Device under Test Relevant Standards Available In-Car Communication System ITU-T P.1100 (Annex F) ITU-T P.1110 (Annex F) HQS-ICC (60015) HMS II.3 with ITU-T P.1120 (Annex F) Pinna type 3.3 (1230.1) or Pinna type 3.4 (1230.2) (6462) with labbgn (6486) 3PASS flex (6995) with CUU I (6085) SLVM.56 (ACOPT 09, 6819) Speech Intelligibility Index (ACOPT 34, 6865) ACQUA Configuration Examples 15

16 Cordless Telephony PP & FP Together Test and PP Only & FP Only Test HMS II.3 MFE VIII.1 (Ethernet) DECT (RF) (Ethernet) MFE IX optional (PP + FP) Portable Part (PP) & Fixed Part (FP) Together Test (Ethernet/WLAN) HMS II.3 MFE X DECT (RF) (PP) (Ethernet/WLAN) (FP) MFE VIII.1 MFE IX Portable Part (PP) & Fixed Part (FP) Only Test (Ethernet) Device under Test Relevant Standards Available Cordless Phone ETSI EN ETSI EN ETSI TBR 10 ETSI TS TBR10 (6711) CAT-IQ 1.0 (6793) CAT-IQ 2.0 (6794) HMS II.3-33 with Pinna type 3.3 (1230.1) HHP IV (1406) or HHP III.1 (1403) For PP & FP together test: CAT-iq TM 1.0 For PP only & FP only tests: CAT-iq TM 2.0 (6462) with MFE VIII.1 (6484) MFE IX (6480) MFE X (6481) PESQ (ACOPT 16, 6836) 16 ACQUA Configuration Examples

17 Home Gateway (Internet Access Device) MFE VIII.1 (Ethernet) MFE IX optional (Ethernet) (Ethernet/WLAN) (Home Gateway) Network (remote) side DECT (RF) (Ethernet) POTS Home (local) side HPO MFE X MFE VIII.1 Device under Test Relevant Standards Available IP Terminal ETSI EG HQS-IP (6769) IP Gateway ETSI ES HQS-IP-Gateways (6786) HPO (6473) IP Echo Canceller IP Network DCME ETSI ES ETSI TS ITU-T G.168 ITU-T P.340 ITU-T G.122 ITU-T G.131 G.168 (6750) FZ TSEC (6751) HQS-EC (6774) CAT-IQ 2.0 (6794) (6462) with MFE VIII.1 (6484) MFE IX (6480) or MFE VIII.1-IMP (6496) MFE X (6481) Optional: TOSQA (ACOPT 10, 6820) PESQ (ACOPT 16, 6836) Relative Approach (ACOPT 17, 6839) 3QUEST (ACOPT 21, 6844) HMS II.3-33 with Pinna type 3.3 (1230.1) HHP IV (1406) or HHP III.1 (1403) 3PASS lab (6990) or HAE-BGN (6971) with ACQUA Configuration Examples 17

18 Skype for Business Skype TM for Business Reference Client + DSB II, III or IV Ethernet Ethernet / WLAN Internet Embedded Client (PC, Phone...) labbgn HMS II.3 Subwoofer Device under Test Relevant Standards Available Devices with Skype TM for Business Embedded Client Skype TM for Business Accessory Skype TM for Business Audio Test specification: for devices using all Skype for Business audio pre-processing for devices using custom software or hardware audio preprocessing for conferencing devices Skype-AS For TV devices Skype for Business (60026) Skype-AS (60000) with DSB II (2406) or DSB III (2407) or DSB IV (2408) HMS II.3-33 with Pinna type 3.3 (1230.1) (6462) with EQUEST (ACOPT 29, 6856) POLQA (ACOPT 30, 6857) 3PASS lab (6990) or HAE-BGN (6971) with ETSI ES ETSI TS Further equipment required depending on and test case 18 ACQUA Configuration Examples

19 Notes ACQUA Information Your regional HEAD acoustics representative or the HEAD acoustics Telecom Sales team in Germany will help you to define the perfect solution for your application and requirements. ACQUA Support In case of any technical question please contact the Telecom Support team. ACQUA Training HEAD acoustics offers ACQUA Training with regard to customer s application. ACQUA Trainings can be conducted on our premises as well as on customer s location. telecom-training@head-acoustics.de ACQUA Configuration Examples 19

20 HEAD acoustics GmbH Ebertstraße 30 a Herzogenrath, Germany info@head-acoustics.de Phone: Fax: HEAD acoustics GmbH 2017 Subject to change