2019 Training Program Information and Application
|
|
- Vernon Bailey
- 5 years ago
- Views:
Transcription
1 2019 Training Program Information and Application
2 2019 TRAINING PROGRAM INFORMATION Training Overview With our state-of-the-art training facility, Door Controls USA, Inc. is committed to the future of the automatic door industry and door technicians. We offer a one-week training class consisting of three days of Quick Start Level 1 Automatic Door Training, followed by two days of AAADM Inspector Certification. In addition, we offer Quick Start Level 2 and Quick Start Level 3 Training classes. See below for more information. All classes 3 day QS with 2 day AAADM from 8 AM 5 PM Monday-Thursday. 12 noon release on Fridays. Quick Start Level 1 Automatic Doors Basic electronics, sensors, controls and motor/gearbox. Activation, safety and adjustments. Troubleshooting tips, how to isolate the system. Hands-on and problem simulation on actual test doors. Allow for classroom, hands-on exposure and problem simulation on actual test doors. Covers all of the most common brands in our industry. Get AAADM Certified to the ANSI A156.10, A and A standards. Quick Start Level 2 Sensors, Modules, and Integrated Systems Introduce customers to sensors, modules, and integrated systems. Learn about different types of sensors and how they are used. Hands-on sensor adjustments and settings. Work with modules like the BR3, CX-33, TDM, and various others. Bring it all together using integrated systems like keypads, modules, and maglocks. Allow for hands-on adjustments, problem simulation and troubleshooting tips. Focus on the most recent developments in our industry. Get AAADM Certified to the ANSI A156.10, A and A standards. Quick Start Level 3 Revolver Training Getting started with revolving doors. Troubleshooting and system isolation. PLC s, frequency drives, controls and motor gear/box. Classroom and hands-on exposure to a variety of common brands used in the industry. Get AAADM Certified to the ANSI A standards. Tuition Fees Quick Start Level 1 - $525 AAADM - $250 Quick Start Level 2 - $650 AAADM - $250 Quick Start Level 3 - $725 AAADM Revolver - $250 For More Information Please Contact: training@doorcontrolsusa.com Ben Calhoun / Training Director / ext. 166 / bcalhoun@doorcontrolsusa.com 321 VZ County Road 4500 Ben Wheeler Texas Phone Fax DoorControlsUSA.com/training-programs
3 This form must be submitted no later than 2 weeks prior to scheduled class date. Class size will be limited to 20 students and will be filled according to date of received application. Please confirm your enrollment with our training department before making travel arrangements APPLICATION FOR A LL TRAINING PROGRAMS PLEASE PRINT LEGIBLY AND COMPLETE ALL SECTIONS FIRST NAME LAST NAME CUSTOMER #: APPLICANT S EMPLOYER JOB POSITION BUSINESS PHONE STREET ADDRESS (NOT A PO BOX) CITY STATE ZIP ADDRESS OWNER / PRESIDENT S NAME HOW MANY SERVICE VANS? HOW MANY SERVICE TECHS? HOW LONG HAVE YOU WORKED ON AUTOMATIC DOORS? ARE YOU AAADM CERTIFIED? WHERE DO YOU PURCHASE AUTOMATIC DOOR PARTS? WHO IS YOUR PARTS BUYER? DO YOU SERVICE MANUAL DOORS? WHERE DO YOU PURCHASE HARDWARE? IS YOUR COMPANY A DISTRIBUTOR OF ANY BRAND? DO YOU SERVICE REVOLVING DOORS? 2019 TRAINING SCHEDULE PLEASE SELECT THE DATE AND CLASS THAT YOU PLAN TO ATTEND Quick Start Level 1 and AAADM Certification Jan 7-11 Feb 4-8 Mar 4-8 Apr 8-12 May 6-10 Jun Jul 8-12 Aug 5-9 Sep 9-13 Oct 7-11 Nov 4-8 Dec 9-13 Spanish Quick Start Level 1 and AAADM Certification Sep Quick Start Level 2 and AAADM Certification Jan Apr Jul Spanish Quick Start Level 2 and AAADM Certification Nov Quick Start Level 3 and AAADM Certification Feb May Aug Fax Application to: Oct Dec Or to: training@doorcontrolsusa.com Ben Calhoun / Training Director / ext. 166 / bcalhoun@doorcontrolsusa.com 321 VZ County Road 4500 Ben Wheeler Texas Phone Fax DoorControlsUSA.com/training-programs
4 DOOR CONTROLS USA TRAINING FEES (Use this form only for Quick Start 1, 2, and 3 class payments) Make AAADM fee payments to the notated PayPal website at bottom of page. Applicants should submit their completed training application along with a check made payable to Door Controls USA, Inc. or complete the credit card payment form below. The Quick Start 1, 2, and 3 class fees and AAADM fees are separate payments. CREDIT CARD PAYMENT FORM DOOR CONTROLS USA TRAINING FEES STUDENT S NAME: CUSTOMER NUMBER: COMPANY NAME: INVOICE NUMBER: Quick Start Level 1 - $525 Quick Start Level 2 - $650 Quick Start Level 3 - $725 CREDIT CARD NUMBER: EXP DATE: SEC CODE: NAME ON CARD: CREDIT CARD BILLING ADDRESS: CITY: STATE: ZIP: PHONE NUMBER: CONFIRMATION REQUESTED: FAX NO FAX NUMBER: (PREFERRED) ATTN: TAKEN BY: AAADM TRAINING FEES The fee for AAADM Inspector and AAADM Revolver Inspector is $250 per person, payable to AAADM via PayPal or check. Applicants should submit their completed AAADM License Agreement along with their payment or receipt to Door Controls USA, Inc. for processing. To pay by credit card, visit the AAADM PayPal link and write the receipt number: AAADM Receipt #. AAADM PayPal: Please send all completed paperwork to Door Controls USA, Inc. for processing. 321 VZ County Road 4500 Ben Wheeler Texas Phone Fax DoorControlsUSA.com/training-programs
5 APPLICATION FOR CERTIFICATION AS AN AAADM INSPECTOR PLEASE PRINT LEGIBLY AND COMPLETE ALL SECTIONS. Name of Individual Applicant: Address: Home Address: [Street Address, not P. O. Box] City, State, and Postal Code: Zip Applicant's Employer Name: Business Address: [Street Address, not P. O. Box] City, State, and Postal Code Telephone Number: SEND DIPLOMA AND ID CARD TO HOME ADDRESS BUSINESS ADDRESS (CHECK ONLY ONE.) Applicant Occupation: Service Sales Install Service/Install Other SEND DIPLOMA AND ID CARD TO HOME ADDRESS BUSINESS ADDRESS (CHECK ONLY ONE.) - How long has applicant worked in the automatic pedestrian door industry immediately preceding date of application?:. - In what capacity?. - Applicant Has Taken the Factory Training Course Given by the Following AAADM Member: (name of company and dates of factory course):. Date and Location of AAADM Inspector Training Course AAADM Member Company Date of Class Providing Training City/State Conditions for Certification: 1. As a prerequisite to taking the AAADM Certified Inspector Training Program, a candidate must be an individual who has a) worked in the automatic pedestrian door industry for 6 months immediately preceding the application for an AAADM training course, or b) worked in the automatic pedestrian door industry for at least 90 days immediately preceding the application for an AAADM training course and has taken the factory training course of an AAADM member. An individual who has worked in the automatic pedestrian door industry is a person who is employed by a company in the industry that sells, services or installs automatic pedestrian doors as its primary business. 2. The individual candidate must complete and sign an application for the training program and return it to the AAADM Certified Instructor prior to the class, along with (a) a check for the course fee, and (b) a License Agreement signed by the candidate and his/her employer. The trainer will review the application for compliance with the prerequisites and will coordinate scheduling of training sessions with the AAADM members giving courses. 3. If a candidate appears not to meet the qualifications, AAADM headquarters will notify the candidate of this fact, and return the course fee to the candidate. The candidate will have the opportunity to give further information regarding his/her qualifications, and if the matter is disputed, it shall be referred to the AAADM Certification Committee for further handling. Applicant Name: Applicant Signature: Date: AAADM Member Coordinator Name: Signature: Along with this application, applicant must submit a completed License Agreement signed by the applicant and his/her employer and a check payable to AAADM in the amount of $ OR If you are paying by credit card please provide the card holder name below and click on link that follows: Card Holder Name: Jan 2015 Do not provide your credit card information to the association office. All credit card payments must be made online through PayPal. You will receive a receipt for your payment via from PayPal. AAADM, 1300 SUMNER AVENUE, CLEVELAND, OH TEL: 216/ , FAX: 216/ , AAADM@AAADM.COM
6 LICENSE AGREEMENT Company: Individual: This License Agreement is entered into this day of, 20, by and between the American Association of Automatic Door Manufacturers ("AAADM"), and the above-named Company and Individual. RECITALS: A. AAADM has established a training and certification program for inspectors of automatic pedestrian doors. B. The Individual has applied for certification as an AAADM certified inspector, and has or will be taking the AAADM certification training program. C. When the Individual successfully completes the AAADM training program, the Individual and Company wish to be able to use the AAADM name and logo. NOW THEREFORE, in consideration of these mutual agreements, the parties agree as follows: 1. Conditions for Inspector Certification. The Company and Individual represent and warrant that the Individual has: i. worked in the automatic pedestrian door industry for 6 months immediately preceding the application for an AAADM training course, or ii. worked in the automatic pedestrian door industry for at least 90 days immediately preceding the application for an AAADM training course and has taken the factory training course of an AAADM member. An individual who has worked in the automatic pedestrian door industry is one who is employed by a company in the industry that sells, services or installs automatic pedestrian doors as its primary business. 2. Certificates. If and when an Individual successfully completes the AAADM training course, including attending all training sessions and passing all examinations, AAADM will issue that Individual a certificate of successful course completion ("Inspector Certificate"), and will issue the Company a certificate that the Company has an AAADM certified inspector on staff ("Company Certificate"). 3. Use of AAADM Name and Logo by Individual. When an Individual receives his/her Inspector Certificate, that Individual shall be licensed and permitted to do the following, as long as his/her Certificate remains in force and he/she complies with all of the provisions of this Agreement: a. display his/her Inspector Certificate and Inspector Identification Card issued by AAADM; Jan 2015
7 b. state that he/she is an AAADM Certified Inspector for automatic pedestrian doors; c. use and reproduce the AAADM Inspection Forms for use only on inspections conducted by him/her in compliance with the procedures set forth in the AAADM training course; d. use the AAADM name and logo, in the form and manner from time to time approved by AAADM, solely to advertise that he/she is an AAADM certified inspector. Each Inspector Certificate shall expire one year after being issued or one year after any revision to the ANSI/BHMA A156.10, A156.19, or A standards, based on the nature of the change and at the discretion of AAADM. In the event that the ANSI Standard is revised, the Individual shall retake and pass a new examination (and training course, if required) within one year after the effective date of the ANSI revision. If this is not done, the Inspector Certificate will expire and this Agreement shall terminate for such Individual. 4. Use of AAADM Name and Logo by Company. When the Company receives its Company Certificate, the Company shall be licensed and permitted to do the following, as long as its Company Certificate remains in force and the Company complies with all of the provisions of this Agreement: a. display the Company Certificate, b. advertise that it has an AAADM certified inspector on staff, c. use the AAADM name and logo, in the form and manner from time to time approved by AAADM, solely to advertise that it has an AAADM certified inspector on staff. If at any time the Company does not employ an AAADM certified inspector, with a current certificate, the Company Certificate and this Agreement shall terminate as to the Company. 5. Conditions. The Company and each Individual must comply with the following: a. Each Individual shall promptly notify AAADM at any time that he or she changes employment. b. The Company and Individual shall certify to AAADM every year that they are in compliance with this Agreement and shall register annually with AAADM. Company and individual certification will expire annually unless registration is completed. c. The certified Individual (or other AAADM certified inspector) shall personally conduct all inspections in which an AAADM Inspection Form is used, and shall not permit any non-certified person to use, complete or sign such forms. d. The Company shall keep a record of all installations inspected by its AAADM certified inspector. e. The Company shall have an ongoing program for the performance of regular AAADM inspections. 6. Limitations. Neither Individual nor Company shall obtain any rights in the AAADM name and logo, and shall not use them except as expressly authorized in this Agreement. Without limitation, neither Company nor Individual shall represent or imply that he, she or it represents, is affiliated with, or is approved or endorsed by AAADM, or that any inspection or service performed by it, him or her is performed, endorsed or approved by AAADM. From time to time, at the request of AAADM, Jan 2015
8 Company and Individual shall provide AAADM with copies of all promotional and other material using the AAADM name and/or logo for its review. This Agreement and the Certificates are not assignable by Company or Individual. This Agreement will be governed by Ohio law, and the parties consent to jurisdiction and venue in any court in Cleveland, Ohio. 7. Termination. In the event that there is any breach of this Agreement, AAADM may terminate this Agreement. This Agreement will also automatically terminate under certain circumstances as provided in paragraphs 3, 4, and 5. On termination, the Individual and/or the Company (as the case may be) will immediately cease all usage of the AAADM name and logo, will destroy all materials using the AAADM name or logo, and will certify to AAADM that it has done so. 8. Indemnity. The Company and Individual indemnify and hold AAADM harmless from all claims, losses, costs and expenses arising out of or relating to the inspector training and certification program, the use of any information or materials obtained from AAADM (including but not limited to any errors or omissions), and all operations of the Individual and the Company, including but not limited to any installation, service, or inspection of doors. IN WITNESS WHEREOF, the parties have executed this Agreement as of the above date. AMERICAN ASSOCIATION OF AUTOMATIC DOOR MANUFACTURERS R. CHRISTOPHER JOHNSON, Executive Director Company Name Signature of Company Officer Signature of Individual (Inspector) Jan 2015
9 APPLICATION FOR CERTIFICATION AS AN AAADM REVOLVING DOOR INSPECTOR PLEASE PRINT LEGIBLY AND COMPLETE ALL SECTIONS. Name of Individual Applicant: Address: Home Address: [Street Address, not P. O. Box] City, State, and Postal Code: Zip Applicant's Employer Name: Business Address: [Street Address, not P. O. Box] City, State, and Postal Code Telephone Number: SEND DIPLOMA AND ID CARD TO HOME ADDRESS BUSINESS ADDRESS (CHECK ONLY ONE.) Applicant Occupation: Service Sales Install Service/Install Other SEND DIPLOMA AND ID CARD TO HOME ADDRESS BUSINESS ADDRESS (CHECK ONLY ONE.) How long has applicant worked in the revolving pedestrian door industry immediately preceding date of application?: In what capacity? Applicant Has Taken the Factory Training Course Given by the Following AAADM Member: (name of company and dates of factory course): Date and Location of AAADM Revolving Door Inspector Training Course Date of Class AAADM Member Company City/State Conditions for Certification: 1. As a prerequisite to taking the AAADM Certified Revolving Door Inspector Training Program, a candidate must be an individual who has worked in the revolving pedestrian door industry for 6 months immediately preceding the application, or b) worked in the revolving pedestrian door industry for at least 90 days immediately preceding the application and has taken the factory training course of an AAADM member. An individual who has worked in the revolving pedestrian door industry is one who is employed by a company in the industry that sells, services, or installs automatic pedestrian doors or revolving pedestrian doors as its primary business. 2. The individual candidate must complete and sign an application for the training program and return it to the AAADM Certified Instructor prior to the class, along with (a) a check for the course fee, and (b) a License Agreement signed by the candidate and his/her employer. The trainer will review the application for compliance with the prerequisites and will coordinate scheduling of training sessions with the AAADM members giving courses. 3. If a candidate appears not to meet the qualifications, AAADM headquarters will notify the candidate of this fact, and return the course fee to the candidate. The candidate will have the opportunity to give further information regarding his/her qualifications, and if the matter is disputed, it shall be referred to the AAADM Certification Committee for further handling. Applicant Name: Applicant Signature: Date: AAADM Member Coordinator Name: Signature: [PLEASE PRINT] Along with this application, applicant must submit a completed License Agreement signed by the applicant and his/her employer and a check payable to AAADM for the training course fee of $ OR. If you are paying by credit card please provide the card holder name below and click on link that follows: Card Holder Name: Do not provide your credit card information to the association office. All credit card payments must be made online. You will receive a receipt for your payment via . AAADM, 1300 SUMNER AVENUE, CLEVELAND, OH PHN: 216/ , FAX: 216/ , AAADM@AAADM.COM 5/2015 Tab 1-10
10 LICENSE AGREEMENT Company: Individual: This License Agreement is entered into this day of, 20, by and between the American Association of Automatic Door Manufacturers ("AAADM"), and the above-named Company and Individual. RECITALS: A. AAADM has established a training and certification program for inspectors of revolving pedestrian doors. B. The Individual has applied for certification as an AAADM certified revolving door inspector, and has or will be taking the AAADM certification training program. C. When the Individual successfully completes the AAADM training program, the Individual and Company wish to be able to use the AAADM name and logo. NOW THEREFORE, in consideration of these mutual agreements, the parties agree as follows: 1. Conditions for Inspector Certification. The Company and Individual represent and warrant that the Individual has: i. worked in the revolving pedestrian door industry for 6 months immediately preceding the application for an AAADM training course, or ii. worked in the revolving pedestrian door industry for at least 90 days immediately preceding the application for an AAADM training course and has taken the factory training course of an AAADM member. An individual who has worked in the revolving pedestrian door industry is one who is employed by a company in the industry that sells, services, or installs automatic pedestrian doors or revolving pedestrian doors as its primary business. 2. Certificates. If and when an Individual successfully completes the AAADM training course, including attending all training sessions and passing all examinations, AAADM will issue that Individual a certificate of successful course completion ("Inspector Certificate"), and will issue the Company a certificate that the Company has an AAADM certified inspector on staff ("Company Certificate"). 3. Use of AAADM Name and Logo by Individual. When an Individual receives his/her Inspector Certificate, that Individual shall be licensed and permitted to do the following, as long as his/her Certificate remains in force and he/she complies with all of the provisions of this Agreement: a. display his/her Inspector Certificate and Inspector Identification Card issued by AAADM; 5/2015 Tab 1-11
11 b. state that he/she is an AAADM Certified Inspector for revolving pedestrian doors; c. use and reproduce the AAADM Inspection Forms for use only on inspections conducted by him/her in compliance with the procedures set forth in the AAADM training course; d. use the AAADM name and logo, in the form and manner from time to time approved by AAADM, solely to advertise that he/she is an AAADM certified inspector. Each Inspector Certificate shall expire one year after being issued or one year after any revision to the ANSI/BHMA A standards, based on the nature of the change and at the discretion of AAADM. In the event that the ANSI Standard is revised, the Individual shall retake and pass a new examination (and training course, if required) within one year after the effective date of the ANSI revision. If this is not done, the Inspector Certificate will expire and this Agreement shall terminate for such Individual. 4. Use of AAADM Name and Logo by Company. When the Company receives its Company Certificate, the Company shall be licensed and permitted to do the following, as long as its Company Certificate remains in force and the Company complies with all of the provisions of this Agreement: a. display the Company Certificate, b. advertise that it has an AAADM certified inspector on staff, c. use the AAADM name and logo, in the form and manner from time to time approved by AAADM, solely to advertise that it has an AAADM certified inspector on staff. If at any time the Company does not employ an AAADM certified inspector, with a current certificate, the Company Certificate and this Agreement shall terminate as to the Company. 5. Conditions. The Company and each Individual must comply with the following: a. Each Individual shall promptly notify AAADM at any time that he or she changes employment. b. The Company and Individual shall certify to AAADM every year that they are in compliance with this Agreement and shall register annually with AAADM. Company and individual certification will expire annually unless registration is completed. c. The certified Individual (or other AAADM certified inspector) shall personally conduct all inspections in which an AAADM Inspection Form is used, and shall not permit any non-certified person to use, complete or sign such forms. d. The Company shall keep a record of all installations inspected by its AAADM certified inspector. e. The Company shall have an ongoing program for the performance of regular AAADM inspections. 6. Limitations. Neither Individual nor Company shall obtain any rights in the AAADM name and logo, and shall not use them except as expressly authorized in this Agreement. Without limitation, neither Company nor Individual shall represent or imply that he, she or it represents, is affiliated with, or is approved or endorsed by AAADM, or that any inspection or service performed by it, him or her is performed, endorsed or approved by AAADM. From time to time, at the request of AAADM, 5/2015 Tab 1-12
12 Company and Individual shall provide AAADM with copies of all promotional and other material using the AAADM name and/or logo for its review. This Agreement and the Certificates are not assignable by Company or Individual. This Agreement will be governed by Ohio law, and the parties consent to jurisdiction and venue in any court in Cleveland, Ohio. 7. Termination. In the event that there is any breach of this Agreement, AAADM may terminate this Agreement. This Agreement will also automatically terminate under certain circumstances as provided in paragraphs 3, 4, and 5. On termination, the Individual and/or the Company (as the case may be) will immediately cease all usage of the AAADM name and logo, will destroy all materials using the AAADM name or logo, and will certify to AAADM that it has done so. 8. Indemnity. The Company and Individual indemnify and hold AAADM harmless from all claims, losses, costs and expenses arising out of or relating to the inspector training and certification program, the use of any information or materials obtained from AAADM (including but not limited to any errors or omissions), and all operations of the Individual and the Company, including but not limited to any installation, service, or inspection of doors. IN WITNESS WHEREOF, the parties have executed this Agreement as of the above date. AMERICAN ASSOCIATION OF AUTOMATIC DOOR MANUFACTURERS R. Christopher Johnson, Executive Director Company Name Signature of Company Officer Signature of Individual (Inspector) 5/2015 Tab 1-13
13 LODGING Low Places 2189 VZ County Road 4501, Ben Wheeler, TX (.5 miles) (800) ext. 117 or Low Places is a Door Controls USA, Inc. property. $85.00 per night DCS Inn 121 PR 8773, Ben Wheeler, TX (1.5 miles) (800) ext. 117 or Lodging@DoorControlsUSA.com DCS Inn is a Door Controls USA, Inc. property. $65.00 per night Fairfield Inn & Suites Marriott 3064 Interstate 20, Van, TX (11 minutes) (903) Ask for Door Controls USA rate. If making reservations online, please call to confirm. Hampton Inn 3505 S Main Street, Lindale, TX (24 minutes) (903) Ask for Door Controls USA rate. If making reservations online, please call to confirm. Comfort Suites 200 W Centennial Blvd, Lindale, TX (25 minutes) (903) If making reservations online, please call to confirm. La Quinta Inn & Suites Lindale 204 W Centennial Blvd, Lindale, TX (26 minutes) (903) Ask for Door Controls USA rate. 10% off bar rate. If making reservations online, please call to confirm. Holiday Inn Express & Suites 1119 E Tyler St, Athens, TX (26 minutes) (903) If making reservations online, please call to confirm. Hampton Inn & Suites Tyler-South 8962 S Broadway Ave, Tyler, TX (31 minutes) (903) If making reservations online, please call to confirm. Hilton Garden Inn 220 E Grande Blvd, Tyler, Texas (35 minutes) (903) If making reservations online, please call to confirm.
14 DIRECTIONS Dallas/Fort Worth International Airport miles Head north on International Pkwy - Partial toll road (2.7 miles) Use the right 2 lanes to merge onto TX-114 E toward Irving/Downtown Dallas (10.9 miles) Merge onto TX-183 E (2.5 miles) Merge onto I-35E S (4.7 miles) Use the middle 2 lanes to stay on I-35E S (0.1 miles) Use the right 2 lanes to take exit 428A for I-30 E (0.4 miles) Continue onto I-30 E (7.9 miles) Continue on US-80 E and follow signs for Terrell/Big Town Blvd (0.2 miles) Keep left to stay on US-80 E, follow signs for Terrell (18.9 miles) Continue onto TX-557 Spur E (4.5 miles) Merge onto I-20 E (37.3 miles) Take exit 537 toward Van/Ben Wheeler/Farm to Market Rd 773/Farm to Market Rd 16 Merge onto I-20 Frontage Rd (0.2 miles) Turn right onto FM773 S (5.2 miles) Turn left onto TX-64 E (0.4 miles) Turn left onto VZ County Rd 4500 Destination will be on the right (0.1 miles) 321 VZ County Rd 4500, Ben Wheeler, TX 75754
15 DIRECTIONS Dallas Love Field Airport Dallas, TX miles Get on I-35E S from Herb Kelleher Way, W Mockingbird Ln, Forest Park Rd and Inwood Rd (3.5 miles) Head northwest toward Herb Kelleher Way (0.2 miles) Use any lane to turn left onto Herb Kelleher Way (0.9 miles) Turn right onto W Mockingbird Ln (0.7 miles) Turn left onto Forest Park Rd (0.7 miles) Turn right onto Inwood Rd (0.9 miles) Turn left onto N Stemmons Fwy (0.1 miles) Use the left lane to take the ramp onto I-35E S (0.1 miles) Take US-80 E and I-20 E to I-20 Frontage Rd in Van Zandt County. Take exit 537 from I-20 E (73.1 miles) Merge onto I-35E S (3.5 miles) Use the middle 2 lanes to stay on I-35E S (0.1 miles) Use the right 2 lanes to take exit 428A for I-30 E (0.4 miles) Continue onto I-30 E (7.9 miles) Continue on US-80 E and follow signs for Terrell/Big Town Blvd (0.2 miles) Keep left to stay on US-80 E, follow signs for Terrell (18.9 miles) Continue onto TX-557 Spur E (4.5 miles) Merge onto I-20 E (37.3 miles) Take exit 537 toward Van/Ben Wheeler/Farm to Market Rd 773/Farm to Market Rd 16 (0.2 miles) Take FM773 S to VZ County Rd 4500 (6.0 miles) Merge onto I-20 Frontage Rd (0.2 miles) Turn right onto FM773 S (5.2 miles) Turn left onto TX-64 E (0.4 miles) Turn left onto VZ County Rd 4500 Destination will be on the right (0.1 miles) 321 VZ County Rd 4500, Ben Wheeler, TX 75754
16 DIRECTIONS Tyler Pounds Regional Airport miles Head northeast on Skyway Blvd (0.9 miles) Turn left onto TX-64 (18.1 miles) Turn right onto VZ County Rd 4500 Destination will be on the right (0.1 miles) 321 VZ County Rd 4500, Ben Wheeler, TX 75754
SDR EDUCATIONAL CONSULTANTS
Foreign Educational Equivalencies APPLICATION for EVALUATION www.sdreducational.org Email: info@sdreducational.org Personal Information (all information is required unless indicated as optional) Full Name:
More informationECA Trusted Agent Handbook
Revision 8.0 September 4, 2015 Introduction This Trusted Agent Handbook provides instructions for individuals authorized to perform personal presence identity verification of subscribers enrolling for
More informationDanfoss Food Retail Winter/Spring
Danfoss Food Retail Winter/Spring 2016-17 www.danfoss.us/foodretail Table of Contents Overview 1 Class Descriptions 2 Class Schedule /Registration 3 Lodging Information 4 Directions to Danfoss 5 Danfoss
More informationCONTRACTORS ASSOCIATION OF WEST VIRGINIA PRESENTS THE
CONTRACTORS ASSOCIATION OF WEST VIRGINIA PRESENTS THE 2018 TECHNICIAN & INSPECTOR CERTIFICATION TRAINING COURSES PLEASE NOTE THAT A LAPTOP OR IPAD TYPE DEVICE IS REQUIRED The CAWV is pleased to offer the
More informationLOGO LICENSE AGREEMENT(S) CERTIPORT AND IC³
LOGO LICENSE AGREEMENT(S) CERTIPORT AND IC³ EXHIBIT B-2 LICENSEE: Address: Attention: Phone: Fax: Email: Account #: CERTIPORT LOGO LICENSE AGREEMENT Authorized Testing Centers This Logo License Agreement
More informationINSTRUCTIONS. What are the steps to apply? What is this? Who can apply? How does it work? What does the test cover?
INSTRUCTIONS What is this? This program has been established to enable experienced fire sprinkler fitters/installers a means to demonstrate their knowledge in the field of fire sprinkler installation.
More informationOctober 21-23, 2013 Holly Springs, NC
NEBB s Cleanroom Performance Testing Certified Professional Seminar and Exam October 21-23, 2013 Holly Springs, NC Introduction: NEBB, in continuance of its policy to enhance education and training within
More informationTrain-the-Trainer. PTI Course Propane Training Institute. Location: A 2-DAY CERTIFICATION COURSE INSTRUCTION & CERTIFICATION TO:
A 2-DAY CERTIFICATION COURSE Location: Holiday Inn Express & Suites 2373 Banff Trail NW Calgary, Alberta Train-the-Trainer PTI Course 700-01 Propane Training Institute INSTRUCTION & CERTIFICATION TO: Improve
More informationGetting There. Contact Us: (877) or Contact Information Getting There
Getting There Contact Information Getting There Contact Us: (877) 983-7787 or VersusUniversity@versustech.com Versus Bayside Classroom Location Versus Technology Bayside Education & Visitor Center 600
More informationRadware. Training Policies V001.70
Radware Training Policies V001.70 TABLE OF CONTENTS SCOPE & DISCLAIMER...3 QUESTIONS?...3 TRAINING...4 OVERVIEW... 4 DELIVERY OPTIONS... 4 TRAINING ENROLLMENT & REGISTRATION... 5 COURSE EVALUATION... 5
More informationBCDC 2E, 2012 (On-line Bidding Document for Stipulated Price Bidding)
BCDC 2E, 2012 (On-line Bidding Document for Stipulated Price Bidding) CLAUSE 13 ON-LINE BIDDING 13.1 ON-LINE BIDDING.1 Definitions: Owner means the party and/or their agent designated to receive on-line
More informationOctober 9-11, 2012 Lenexa, KS
NEBB s Cleanroom Performance Testing Certified Professional Seminar and Exam October 9-11, 2012 Lenexa, KS Introduction: NEBB, in continuance of its policy to enhance education and training within the
More informationIV. CBP Certified Building Professional Application
IV. CBP Certified Building Professional Application You may complete Part A of this application form at any time in order to apply to become qualified to sit for the CBP exam. Complete Part B of the application
More informationInternet Service Provider Agreement
Internet Service Provider Agreement 1. Introduction By using this Internet service ( Service ) you agree to be bound by this Agreement and to use the Service in compliance with this Agreement, our Acceptable
More informationWilliamsburg Multiple Listing Service, Inc. SENTRILOCK SERVICE AGREEMENT
FORM 118 Williamsburg Multiple Listing Service, Inc. SENTRILOCK SERVICE AGREEMENT THIS SENTRILOCK SERVICE AGREEMENT (the Agreement ) is entered into as of the day of, 20, by and between the Williamsburg
More informationROYAL MAIL GROUP ADDRESS MANAGEMENT UNIT PAF DATA END USER TERMS ( End User Terms )
ROYAL MAIL GROUP ADDRESS MANAGEMENT UNIT PAF DATA END USER TERMS ( End User Terms ) Introduction These End User Terms permit the use of PAF Data in Solutions by End Users. These terms are not applicable
More informationYou may use the Service to either access, establish or change the following:
Online Access Agreement June 18, 2015 (Revision date) I. Introduction This Online Access Agreement (this "Agreement") contains the terms that govern your use of the Participants' Private Area of the www.afmsagaftrafund.org
More informationPlease read all information and instructions before completing the application form.
Dear International CNT Applicant, Thank you for your interest in the Clean Needle Technique (CNT) course, administered by the Council of Colleges of Acupuncture and Oriental Medicine (CCAOM). Successful
More informationWater Distribution Level 1 January 8 12, 2018
Water Distribution Level 1 Operator Training and Certi ication Exam January 8 12, 2018 Hosted by: Lac Courte Oreilles Public Works Lac Courte Oreilles Ojibwa Community College Hayward, Wisconsin Includes:
More informationPetroleum Mechanic Certification Program Policies and Procedures
Certification Program Effective: Document Uncontrolled if Printed Table of Contents 1. Background... 3 2. Certificate Requirements... 3 3. Training Standards... 4 4. Certification Rights, Privileges and
More informationPlease initial each page and mail, FAX, or your completed application to: Milwaukee NARI W. Dearbourn Ave Wauwatosa, WI
This application is the first step in earning the Certified Kitchen and Bath Remodeler (CKBR) designation. Please read and complete each section fully and accurately in clear, legible handwriting or type.
More informationSEMINAR FOR CLEANROOM CERTIFIED PROFESSIONALS October 4-6, 2010
We deliver sustainable performance in the built environment SEMINAR FOR CLEANROOM CERTIFIED PROFESSIONALS October 4-6, 2010 NEBB, in continuance of its policy to enhance education and training within the
More informationGreater TEXAS Federal Credit Union 6411 North Lamar Blvd. Austin, TX (512) Toll Free: (800) Fax: (512)
Terms and Conditions for Remote Deposit This Remote Deposit Capture Agreement contains the terms and conditions that govern the use of Remote Deposit Capture provided to you by Greater Texas Federal Credit
More informationDomain Names & Hosting
Domain Names & Hosting 1 The following terms and conditions apply to the domain registration Service: 1.1 You acknowledge and recognize that the domain name system and the practice of registering and administering
More informationTransition for California Code Certifications for Current Certificate Holders
Transition for California Code Certifications for Current Certificate Holders Because of the process utilized to develop the California exams, the International Code Council has determined that California-specific
More informationCouncil of Colleges of Acupuncture and Oriental Medicine Clean Needle Technique Course Application Packet September 7, 2019, Hong Kong
Council of Colleges of Acupuncture and Oriental Medicine Clean Needle Technique Course Application Packet September 7, 2019, Hong Kong Dear International CNT Applicant, Thank you for your interest in the
More informationEXTRUTECH PLASTICS, INC. Custom Extruder of Close Tolerance Profiles
First Time Buyer? Thank you for your order! We need three items from you before your order can go into production: 1.) New Customer Information Sheet (Sheet Number 1): Our new customer information sheet
More informationALOA TRAINING CENTER All About Doors and Hardware Session April 28 May 4, 2014
ALOA Training Center Doors and Hardware Sessions Course Descriptions: Commercial Door Hardware & its Application 16 hours This two day course will introduce you to basic commercial door hardware; its application,
More informationNARI. Please initial each page and mail, or FAX your completed application to: Milwaukee NARI W. Dearbourn Ave Wauwatosa, WI 53226
This application is the first step in earning the Green Certified Professional (GCP) designation. Please read and complete each section fully and accurately in clear, legible handwriting or type. You may
More informationAPPLICATION DEADLINE Postmarked by January 12, 2018
APPLICATION DEADLINE Postmarked by January 12, 2018 Dear Marketplace Vendor Applicant: The Grapevine Convention & Visitors Bureau invites you to apply to participate in the 34 th Annual Main Street Fest
More informationCertified Hospitality Supervisor
CHS APPLICATION FORM Certified Hospitality Supervisor Ref Code: HOW TO APPLY Complete Sections 1-5 as thoroughly and accurately as possible. Have your direct/immediate supervisor or a corporate representative
More informationIncludes: FREE Training for Tribal Personnel Opportunity for FREE Professional Certification FREE Wastewater Collection Level 1 Certification Exams
Wastewater Collection - Level 1 Tribal Operator Training and Certification Exam April 3-5, 2018 Hosted by: Quechan Indian Tribe, Publics Works Department Includes: FREE Training for Tribal Personnel Opportunity
More informationBoard Certified Autism Technician
Board Certified Autism Technician Guide to Registration If you follow all the steps in this guide, you will successfully register for the BCAT exam. For additional assistance please contact BICC between
More informationEXAMINATION ENTRY REGISTRATION (NOVEMBER 2014)
The Singapore Association of The Institute of Chartered Secretaries and Administrators (SAICSA) SAICSA INTERNATIONAL QUALIFYING SCHEME EXAMINATION ENTRY REGISTRATION (NOVEMBER 2014) COMPANY SPONSORED NEW
More informationCONTRACTORS ASSOCIATION OF WEST VIRGINIA PRESENTS THE
CONTRACTORS ASSOCIATION OF WEST VIRGINIA PRESENTS THE 2013 TECHNICIAN & INSPECTOR CERTIFICATION TRAINING COURSES The CAWV is pleased to offer the Certification Training Courses which are offered annually
More informationCustomer Name: (As Listed on License) Principal(s) Name: (Must be Listed on License as Principal)
P a g e 1 BRESCOME BARTON ONLINE ACCOUNT REGISTRATION FORM {Please print clearly} Customer Name: (As Listed on License) Brescome Barton Customer #: Principal(s) Name: (Must be Listed on License as Principal)
More informationINSTRUCTOR CERTIFICATION PROGRAM
ADDA International 105 East Main Street Newbern, TN 38059 Telephone 731-627-0802 INSTRUCTOR CERTIFICATION PROGRAM The ADDA Instructor Certification Program is designed to provide professional recognition
More informationYOUR BUSINESS Networking Lunch & Vendor Fair
10th Annual YOUR BUSINESS Networking Lunch & Vendor Fair THURSDAY, FEBRUARY 8, 2018 9:30 AM - 2 PM OPEN TO THE PUBLIC - Tell your Customers! The Center for Visual & Performing Arts, 1040 Ridge Rd., Munster
More informationTRIBAL WATER AND WASTEWATER OPERATOR CERTIFICATION PROGRAM TRAINING ANNOUNCEMENT WATER DISTRIBUTION LEVEL 2 TRAINING AND CERTIFICATION EXAM FOR WATER
TRIBAL WATER AND WASTEWATER OPERATOR CERTIFICATION PROGRAM TRAINING ANNOUNCEMENT WATER DISTRIBUTION LEVEL 2 TRAINING AND CERTIFICATION EXAM FOR WATER OPERATORS Hosted by the Salt River Pima-Maricopa Indian
More informationCLTC RE-CERTIFICATION Candidate Information & Application
CLTC RE-CERTIFICATION Candidate Information & Application CLTC Re-certification Springfield, OH 45504-1568 Fax: 703-940-4089 PHILOSOPHY It is the responsibility of LTC certified nurses to maintain their
More informationLPI Approved Training Partner (LPI ATP) Program Agreement
The following agreement is herewith concluded between: - hereinafter Partner - and Open Source Certification GmbH, LPI Central Europe, Karthäuserstraße 8, 34117 Kassel, Germany, (hereafter, LPI CE ) Preamble
More informationDRIVER EDUCATION SCHOOL FEE SHEET
P.O. Box 12157 - Austin, Texas 78711-2157 800-803-9202 - (512) 463-6599 - FAX (512) 463-1512 www.tdlr.texas.gov des@tdlr.texas.gov DRIVER EDUCATION SCHOOL FEE SHEET ALL FEES ARE NONREFUNDABLE (C ) School
More informationAppalachia Intermediate Unit 8
Appalachia Intermediate Unit 8 Microsoft Office 2013 Workshops Excel PowerPoint Word Summer 2014 Catalog Page 2 Introduction Appalachia Intermediate Unit 8 will offer Microsoft Office 2013 workshops during
More informationELECTRONIC RECORDING MEMORANDUM OF UNDERSTANDING
ELECTRONIC RECORDING MEMORANDUM OF UNDERSTANDING THIS MEMORANDUM OF UNDERSTANDING, dated, is between Caldwell County, North Carolina ( COUNTY ), and COMPANY ) with offices at. Caldwell County desires to
More informationEXHIBIT BOOTH REQUEST & PERSONNEL REGISTRATION & HOTEL FORM
EXHIBIT BOOTH REQUEST & PERSONNEL REGISTRATION & HOTEL FORM WSWA 76 TH ANNUAL CONVENTION & EXPOSITION March 31 - April 3, 2019 Grande Lakes Orlando This form is INTERACTIVE. You can type directly onto
More informationNEBB TECHNICAL RETRO-COMMISSIONING SYSTEMS (RCX) SEMINAR OF EXISTING BUILDING RC X SEMINAR DATES MONDAY WEDNESDAY SEPTEMBER 26 28, 2016
NEBB TECHNICAL RETRO-COMMISSIONING OF EXISTING BUILDING SYSTEMS (RCX) SEMINAR RC X SEMINAR DATES MONDAY WEDNESDAY SEPTEMBER 26 28, 2016 SEMINAR REGISTRATION DEADLINE MONDAY, SEPTEMBER 12, 2016 RC X CP
More informationCh. 5 UPC SCANNING SYSTEMS CHAPTER 5. UPC SCANNING SYSTEMS AND PLU DEVICES GENERAL
Ch. 5 UPC SCANNING SYSTEMS 70 5.1 CHAPTER 5. UPC SCANNING SYSTEMS AND PLU DEVICES GENERAL Sec. 5.1. Purpose. 5.2. Requirement of annual testing and inspection. 5.3. Testing and inspection standards. 5.4.
More informationDomain Hosting Terms and Conditions
Domain Hosting Terms and Conditions Preamble This document may be augmented or replaced by relevant sections of other parts of our Agreement, and should be read in conjunction with other supporting documents,
More informationMBC BUSINESS SERVICES, INC. AGREEMENT FOR REGISTERED AGENT SERVICES
MBC BUSINESS SERVICES, INC. AGREEMENT FOR REGISTERED AGENT SERVICES This AGREEMENT is made this day of, 201 (the Effective Date ) by and between MBC Business Services, Inc., a Missouri corporation ( MBC
More informationCSP Certified Service Professional Application
CSP Certified Service Professional Application You may complete Part A of this application form at any time in order to apply to become qualified to sit for the CSP exam. Complete Part B of the application
More informationMath Olympiads Registration Information & FAQ
Registration Information & FAQ Thank you for your interest in our popular Math Olympiads course. In order to ensure your registration is valid and processed correctly it is imperative that you read carefully
More informationCBP Certified Building Professional Application
CBP Certified Building Professional Application You may complete Part A of this application form at any time in order to apply to become qualified to sit for the CBP exam. Complete Part B of the application
More informationOregon Clinical Radiologic Proficiency Certificate: Pathway II 2017 Certificate Application This application will be accepted through Dec. 31, 2017.
Dental Assisting National Board, Inc. Fee: $150 Measuring Dental Assisting Excellence 2017 Certificate Application This application will be accepted through Dec. 31, 2017. This application is for dental
More informationAutodesk Professional Certification & Authorized Certification Center
Autodesk Professional Certification & Authorized Certification Center Global Program Guide Version 9 January, 2013 Autodesk has set these standards, which are applicable at the date of issue of this document.
More informationSAVE International Certification Program Transition Summary
The following is a summary of the certification program changes for SAVE International (SAVE). This information was presented in detail at the 2017 Value Summit in Philadelphia in August 2017. The new
More informationAPPLICATION DEADLINE Postmarked by January 12, 2018
APPLICATION DEADLINE Postmarked by January 12, 2018 Dear Artisan Vendor Applicant: The Grapevine Convention & Visitors Bureau invites you to apply to participate in the 34 th Annual Main Street Fest to
More informationNEBB Sound and Vibration (S&V) Certified Professional Seminar
NEBB Sound and Vibration (S&V) Certified Professional Seminar With Optional Exams June 6-10, 2016 Deerfield Beach, FL Optional Exams Sound CP Written/Practical Wednesday, June 8 Vibration CP Written/Practical
More informationTimber Products Inspection, Inc.
Timber Products Inspection, Inc. Product Certification Public Document Timber Products Inspection, Inc. P.O. Box 919 Conyers, GA 30012 Phone: (770) 922-8000 Fax: (770) 922-1290 TP Product Certification
More informationCongratulations Silver Boeing Performance Excellence Award recipient!
Congratulations Silver Boeing Performance Excellence Award recipient! This BPEA congratulations package explains the actions required and guidelines to follow to ensure your company realizes the full benefits
More information2016 Registration Guide for University Representatives Submitting Payments on Behalf of Student Presenters
2016 Registration Guide for University Representatives Submitting Payments on Behalf of Student Presenters URC REGISTRATION PHASE I: CREATING YOUR ACCOUNT STEP 1. Log onto the URC Web site: https://urcbutler.edu
More informationCertified Assessor. Application for COBIT Certified Assessor
Application for COBIT Certified Application for COBIT Certified REQUIREMENTS TO BECOME A COBIT CERTIFIED ASSESSOR There is a required US $100 Application processing fee. Payment of the COBIT Certified
More informationAORN GROUP MEMBERSHIP Facility Program Application CHECKLIST IMPORTANT PLEASE READ ALL INSTRUCTIONS BEFORE COMPLETING GROUP MEMBERSHIP APPLICATION
IMPORTANT PLEASE READ ALL INSTRUCTIONS BEFORE COMPLETING GROUP MEMBERSHIP APPLICATION To ensure timely processing of your application, please ensure information is complete, accurate, and legible (if hand-written).
More informationASNT NDT PROGRAM RENEWAL REQUIREMENTS
ASNT NDT PROGRAM RENEWAL REQUIREMENTS A. ASNT NDT/PdM Level III Certification The period of certificate validity is 60 months from date of issue, ending on the last day of the expiration month shown on
More informationAGENCY APPLICATION AND PARTICIPATION AGREEMENT MISSOURI POLICE CHIEFS CHARITABLE FOUNDATION CERTIFICATION PROGRAM
AGENCY APPLICATION AND PARTICIPATION AGREEMENT MISSOURI POLICE CHIEFS CHARITABLE FOUNDATION CERTIFICATION PROGRAM This Application and Participation Agreement (hereinafter the "Agreement") is entered into
More informationChapter 4 EDGE Approval Protocol for Auditors Version 3.0 June 2017
Chapter 4 EDGE Approval Protocol for Auditors Version 3.0 June 2017 Copyright 2017 International Finance Corporation. All rights reserved. The material in this publication is copyrighted by International
More informationConsumer Online Banking Application
Consumer Online Banking Application SERVICE INFORMATION To apply for consumer online banking services, complete this Online Banking Application, print, sign and return using one of the following options:
More informationREGISTERED TRAINING PROVIDER GUIDELINES AND APPLICATION 2018
REGISTERED TRAINING PROVIDER GUIDELINES AND APPLICATION 2018 Contents Contents 1. ABOUT NABCEP... 1 2. REGISTERED PROVIDERS... 1 3. ELIGIBLE INSTITUTIONS... 2 4. INSURANCE REQUIREMENTS... 2 5. COURSE REQUIREMENTS...
More information1. Type of Deposit and Information: Please select the appropriate type of deposit and provide the requested information:
Non-Budapest Treaty Deposit Form (34) Patent Depository 10801 University Boulevard Manassas, Virginia 20110-2209 USA Telephone: (800) 638-6597 Facsimile: (703) 334-2932 Email: patentdeposit@atcc.org THIS
More informationPAYMENT FORM. Name of Cardholder: Service Selected: (please select one below) Signature: Domestic
Mail forwarding services can be a critical component of the successful operation of any business. For your convenience we are offering two (2) mail forwarding options. You may select the option that best
More informationCONSTRUCTION MANAGER CERTIFICATION INSTITUTE. Recertification Point Provider Guide
CONSTRUCTION MANAGER CERTIFICATION INSTITUTE Recertification Point Provider Guide 6CONTENTS Recertification Overview... 3 PART ONE: Why Become a Recertification Points Provider... 4 Recertification Point
More information2. What is Personal Information and Non-Personally Identifiable Information?
Privacy Notice Snipp Interactive, Inc. Last Updated: February 11, 2016 Contents: 1. Introduction 2. What is Personal Information? 3. Information we collect about you 4. Use of Your Information 5. Location
More informationVendor Partnership Manual. Section 6 EDI
Section 6 No changes have occurred in this chapter since our last update in January 2017. TABLE OF CONTENTS 1. Electronic Data Interchange Trading Partner Agreement... 1 2. Requirements - Shopko Stores
More informationElectric Sample Form No Agreement for Unmetered Low Wattage Equipment Connected to Customer-Owned Street Light Facilities
Pacific Gas and Electric Company San Francisco, California U 39 Revised Cal. P.U.C. Sheet No. 32135-E Cancelling Revised Cal. P.U.C. Sheet No. 27053-E Electric Sample Form No. 79-1048 Agreement for Unmetered
More informationTerms and Conditions between Easy Time Clock, Inc. And Easy Time Clock Client
Terms and Conditions between Easy Time Clock, Inc. And Easy Time Clock Client Client s Responsibility Easy Time Clock, Inc. ( ETC ) is a client-led time and attendance program. The Client is solely responsible
More informationWelcome to the PGC Think the Game Short Course. Now that you ve signed up, there are a few things you need to do to make sure you re ready... FORMS TO COMPLETE: Complete the Medical Release and Liability
More informationOperator Training and Certification Exam. Wastewater Treatment Level 1
Wastewater Treatment Level 1 Operator Training and Certification Exam Hosted by: Spirit Lake Water Resource Management Spirit Lake Casino and Resort Includes: FREE Training for Tribal Wastewater Operators
More informationPayment Card Industry (PCI) Data Security Standard Validation Requirements
Payment Card Industry (PCI) Data Security Standard Validation Requirements For Internal Security Assessors (ISA) Version 1.0 April 2010 Table of Contents 1 Introduction... 2 1.1 Qualification Process Overview...
More informationFire Prevention Officers Association of British Columbia
Registration Procedures NFPA 1033 This is a self-paced course and can be started once registration and payment is completed. Students will have from the date of registration, 5 (five) calendar months to
More informationELECTRONIC RECORDING MEMORANDUM OF UNDERSTANDING
ELECTRONIC RECORDING MEMORANDUM OF UNDERSTANDING THIS MEMORANDUM OF UNDERSTANDING, dated, is between the Davie County North Carolina Register of Deeds office ( COUNTY ), and ( COMPANY ) with offices located
More informationECLIPSE FOUNDATION, INC. INDIVIDUAL COMMITTER AGREEMENT
ECLIPSE FOUNDATION, INC. INDIVIDUAL COMMITTER AGREEMENT THIS INDIVIDUAL COMMITTER AGREEMENT (THE AGREEMENT ) is entered into as of the day of, 20 (the Effective Date ) by and between Eclipse Foundation,
More informationCCST Examination Application
1. APPLICANT INFORMATION (Please print or type.) Prefix: Mr. Mrs. Ms. Miss Other Last name First name MI (you must provide your name as it appears on your photo identification) Membership IBEW UA Member
More informationASBO International. SFO Recertification Guide One-Step Process. Updated February 1, 2018 Tel: x
SM ASBO International SFO Recertification Guide One-Step Process Updated February 1, 2018 Tel: 866.682.2729 x7079 Email: certification@asbointl.org Contents Recertification Guide One-Step Process.... 3
More informationParticipation Agreement for the ehealth Exchange
Participation Agreement for the ehealth Exchange This Participation Agreement for the ehealth Exchange ("Agreement") is entered into as of the last date written below ( Effective Date ) by and between
More informationPolycom Upgrade Program Video Products
Overview Upgrade Your Existing Polycom Equipment Benefit by owning the latest and greatest additions of the Polycom Office, a complete conferencing solution, by upgrading your Polycom video conferencing
More informationCleanroom Performance
Cleanroom Performance Testing (CPT) Seminar March 4-6, 2019 Vancouver, WA Location: This Seminar is Designed for: This seminar is intended for individuals with a minimum of two years of cleanroom testing
More informationPolycom Upgrade Program Video Products
Overview Upgrade Your Existing Polycom Equipment Benefit by owning the latest and greatest additions of the Polycom Office, a complete conferencing solution, by upgrading your Polycom video conferencing
More informationNOTICE OF EXAMINATION. Examination for Certificate of Fitness for Construction Site Fire Safety Manager (CSFSM) (S-56)
NOTICE OF EXAMINATION Title: Examination for Certificate of Fitness for Construction Site Fire Safety Manager (CSFSM) (S-56) Date of Exam: Written tests are administered Monday through Friday (except legal
More informationINSTRUCTOR HIRING CRITERIA
INSTRUCTOR HIRING CRITERIA INSTRUCTOR PREREQUISITES All potential instructors (staff/contract) must undergo an assessment of qualifications to perform instruction for isafety Services Ltd. Verification
More informationUF-IFAS Jackson County Extension Office Marianna, FL 32448
Institute of Food and Agricultural Sciences 2741 Pennsylvania Ave. UF-IFAS Jackson County Extension Office Marianna, FL 32448 Information for the next Certified Pile Burners Course: The Florida Forest
More informationOngoing conformance of the product with the standard is the responsibility of the certificate holder and the Australian manufacturer or importer.
1. Preface The (TECS) offered by Comtest Certification Body is based on a type test scheme, which is one where a representative sample is provided for testing and certification, and does not include any
More information2018 Outdoor Food Vendor VENDOR CONTRACT APPLICATION
2018 Outdoor Food Vendor VENDOR CONTRACT APPLICATION Friday Oct 12, 2018 Saturday Oct. 13, 2018 Sunday Oct. 14, 2018 9am 5pm 9am 5pm 9am 4pm *PLEASE PRINT CLEARLY* Important Cut off dates: August 15 th
More information2001 CUSTOMER TECHNICAL TRAINING CONTROLS SCHEDULE
2001 CUSTOMER TECHNICAL TRAINING CONTROLS SCHEDULE Course Course Name Start End Location Code Date Date ECS200 VVT Comfort Controls 3/19/01 3/23/01 Houston ECS900 Best Plus Programming 3/28/01 3/29/01
More informationFeaturing California-Specific SWANA MOLO Training In Today s World, You Can t Afford NOT To Be Trained & Certified
Solid Waste Association of North America (SWANA) Northern California Gold Rush Chapter Advancing the practice of environmentally and economically sound municipal solid waste management in North America
More informationNATIONAL REGISTRY OF CERTIFIED CHEMISTS 125 Rose Ann Lane, West Grove, PA (phone) / (fax) /
NATIONAL REGISTRY OF CERTIFIED CHEMISTS 125 Rose Ann Lane, West Grove, PA 19390 610-322-0657 (phone) / 800-858-6273 (fax) / rphifer@nrcc6.org (email) 1 APPLICATION FOR CERTIFICATION AS A TOXICOLOGICAL
More informationWYDOT Traffic Control Supervisor Certification Program
Page 1 of 5 WYDOT Traffic Control Supervisor Certification Program INTRODUCTION The purpose of this program is to certify personnel involved in the layout, inspection and design of traffic control plans.
More informationFull Name of Centre:... Date of establishment:... Address: Telephone No:... Fax No: (Please include area codes)
APPLICATION for AIES CENTRE REGISTRATION 2017/18 2512 Chambers Road, Tustin CA 92780, USA Tel: 949-501-3701 Email: info@aiesus.org Website: www.aiesus.org Please read the instructions and terms of contract
More information2015 KPS Factory Service Training Schedule January-June. *Industrial Gen and Controls. Commercial Marine Certification
2015 KPS Factory Service Training Schedule January-June Jan 19-23 Jan 26-30 Feb 18-20 March 3-5 March 9-13 March 16-20 April 8-10 April 21-22 April 27-28 April 29-30 May 4-8 May 11-15 *Industrial Generator
More informationJune 2012 First Data PCI RAPID COMPLY SM Solution
June 2012 First Data PCI RAPID COMPLY SM Solution You don t have to be a security expert to be compliant. Developer: 06 Rev: 05/03/2012 V: 1.0 Agenda Research Background Product Overview Steps to becoming
More information1.2 Participant means a third party who interacts with the Services as a result of that party s relationship with or connection to you.
Document Cloud (including Adobe Sign) Additional Terms of Use Last updated June 16, 2016. Replaces the prior version in its entirety. Capitalized terms used in these Document Cloud Additional Terms ( Additional
More informationHPE Education Services ESE (East and South Europe) Terms and Conditions
HPE Education Services ESE (East and South Europe) Terms and Conditions These terms and conditions govern the purchase of education services from Hewlett Packard Enterprise Company ( HPE ). 1. Definitions
More information