Pass Cisco Exam

Transcription

1 Pass Cisco Exam Number: Passing Score: 800 Time Limit: 120 min File Version: Pass Cisco Exam Exam Name: Installing TelePresence Video Immersive Systems Exam

2 Selftestengine QUESTION 1 Where are the current E. 164 alias, H.323 ID, and TCU IP setting displayed? A. the top of the operator interface in the Device Overview B. the bottom of the operator interface C. the top of the administrator interface D. the bottom of the administrator interface /Reference: : TCU Admin Guide Page 9

3 QUESTION 2 What is the correct sequence to upgrade the Cisco Telepresence Server? A. Navigate to the Configuration tab. Click Upload software imago B. Navigate to the Configuration tab. Click Browse, and choose the software image. Click Upload software image. C. Use a client like WinSCP to upload the new software image on the Cisco Telepresence Server and reboot the server. D. Navigate to the Configuration tab and choose Upgrade Software. Reboot the server The Cisco Telepresence Server automatically uploads the latest software image. Correct Answer: B

4 /Reference: : Student Guide Page QUESTION 3 Which of the following is a real part of a standard shipment of a Cisco Telepresence T3 system? A. three boxes with T1 displays B. three boxes with TCU, table monitors C. one box with table tops D. two boxes with overhead lighting Correct Answer: A /Reference: : See Student Guide Page QUESTION 4 Which method can you use to remotely issue commands to the TCU? A. an SSH client such as PuTTY B. an SCP client such as WinSCP C. a Telnet client D. any web browser that supports HTTPS Correct Answer: A

5 /Reference: : Student Guide Page 1-44 QUESTION 5 Which Cisco Telepresence Server diagnostic tool shows the most recent shutdown and upgrade events? A. activated feature status B. system status C. system log D. conference status /Reference: : Student Guide page QUESTION 6 Which one of the following options describes a Cisco Telepresence multipoint call? A. A call between more than two Cisco Telepresence T3 systems. B. A call between two Cisco Telepresence T3 systems and a regular endpoint. C. A call between a Cisco Telepresence T3 and up to two regular endpoints. D. A call between a Cisco TelePresenc T3 and more than two regular endpoints. Correct Answer: D /Reference: : Student Guide Page QUESTION 7 What is the most appropriate troubleshooting measure to use if there is no control or preview image of the document camera from the GUI? A. Check that the optical DVI cable has power. B. Review the device properties file to ensure that the text has been entered correctly and check that the USB extender has power. C. Ensure that the cameras are seated properly. D. Reboot the codecs.

6 Correct Answer: B /Reference: : Student Guide Page 1-77 Student Guide Page QUESTION 8 For a Cisco Telepresence T3 system, what is the maximum power consumption, including lighting? A. 1.3kW B. 2.5 kw C. 3.8 kw D. 4.3 kw /Reference: : QUESTION 9 When planning a Cisco Telepresence T3 installation, what is the first thing you should do? A. Visit the installation location and walk the complete route from where the Cisco Telepresence T3 boxes are delivered to the planned T3 room. B. Make sure that the largest boxes will fit in elevators, door openings, and around corners in corridors. C. Ask the customer to complete a site survey document. D. Check the size of the room to make sure the installation will fit /Reference: : Student Guide Page 1-20 All answers are valid, the order according to the Student Guide is as follows: 1. Ask the customer to complete a site survey document. 2. Visit the installation location and walk the complete route from where the Cisco Telepresence T3 boxes are

7 delivered to the planned T3 room. 3. Make sure that the largest boxes will fit in elevators, door openings, and around corners in corridors. 4. Check the size of the room to make sure the installation will fit QUESTION 10 What would you normally check first if none of the three collaboration screens has an image? A. Make sure that each collaboration screen has a USB cable connected to the TCU. B. Check that the system power-on sequence was observed; the TCU should be powered-on first. C. Check the HDMI splitter in the right table leg for power, correct cabling, and proper operation. D. Check that the dip switches for each table button are set. /Reference: : Student Guide Page QUESTION 11 Which two features are part of the TCU? (Choose two.) A. It is powered by a different PSU than the two onboard Ethernet switches. B. It is responsible for controlling all of the devices in the Cisco Telepresence T3 system. C. It is responsible for driving the Cisco Telepresence graphical user interface only. D. It is specialized hardware that includes features such as a high-reliability graphics card and six USB ports in one chassis. E. It is responsible for point-to-multipoint calls. Correct Answer: BD /Reference: : Student Guide Page 1-42 QUESTION 12 For the Cisco TelePresence Server, what is the bandwidth requirement for each connected T3 site? A. 10 Mb/s B. 12 Mb/s C. 14 Mb/s D. 16 Mb/s Correct Answer: B /Reference: :

8 QUESTION 13 What must be done if the VCS gatekeeper requires H.235 authentication for registrations? A. You must manually configure the authentication credentials on the center codec only. B. Do nothing because the TCU can bypass the authentication mechanism. C. You must manually configure the authentication credentials for each codec. D. Do nothing because gatekeepers do not require authentication. /Reference: : Student Guide Page 1-89 QUESTION 14 Which three items are core parts of the Cisco Telepresence T3 deployment? (Choose three.) A. Cisco Telepresence T3 system B. Cisco Telepresence Server C. Content Server D. Video Communication Server E. Cisco TelePresence Management Suite F. Cisco TelePresence ISDN Gateway G. Cisco WebEx Correct Answer: ABD /Reference: : QUESTION 15 Which site occupies the center screen in a call that involves four Cisco Telepresence T3 sites? A. The site that is marked "important." B. The site at which the participants are actively talking. C. The site that has the most bandwidth. D. The site that owns the conference. Correct Answer: A /Reference: : Cisco TP Server Product User Guide Page 132.

9 In general, the behavior of the TelePresence Server is to display the "loudest" participants in the most prominent layout panes. If there are more contributors than there are panes available, then the "quietest" participants are not shown. Cisco TP Server Product User Guide Page 137. Marking a participant as "important" For each conference, one active participant can be set as "important". This means that the TelePresence Server considers this participant first when deciding which contributors to show in which layout panes, rather than their position in the list being set by how loudly they are speaking. See the endpoint control settings in Displaying conference status. QUESTION 16 When viewing the Cisco Telepresence Server status, what information is provided in the Conference Status section? A. active Cisco Telepresence Servers, active conferences, active endpoints. and ports B. Cisco Telepresence Server activation, encryption, third-party interop, and licensed ports C. model, serial number, software version, and build D. uptime, hostname, IP address. H.323 gatekeeper status, and master/slave management Correct Answer: A /Reference: : Student Guide Page QUESTION 17 Which Cisco Telepresence infrastructure component is an optional component that can be used to connect to the PSTN? A. Cisco Telepresence Management Suite B. Cisco Telepresence Video Communication Server C. Cisco Telepresence ISDN Gateway D. Cisco Telepresence Content Server /Reference: : QUESTION 18 What is the recommend latency needed in order to provide a user with a good Telepresence experience? A. <100ms B. >100ms -200ms C. >200ms -250ms D. >250ms

10 Correct Answer: A /Reference: : Student Guide Page 1-24 QUESTION 19 Which three device features are part of the TCU custom Intel PC? (Choose three.) A. high-reliability graphic card B. 60-GB hard disk C. 13 x serial ports D. PS/2 keyboard and mouse ports E. 1x8 port unmanaged Gigabit Ethernet switch F. high-definition audio card G. 2x8 port Power over Ethernet unmanaged Gigabit Ethernet switches Correct Answer: ADF /Reference: : Student Guide Page 1-42

11 QUESTION 20 Which of these describes the correct way to set up a T3-to-T3 call? A. The center codec calls the center codec, the left codec calls the right codec, and the right codec calls the left codec. B. The center codec calls the center codec, the left codec calls the left codec, and the right codec calls the right codec. C. The TCU calls both center codecs simultaneously, then the left codec calls the right codec, and the right codec calls the left codec.

12 D. The TCU calls all codecs simultaneously. Correct Answer: A /Reference: : QUESTION 21 What do you need to do when troubleshooting web interface problems with the Codec C90 after you upgrade to the latest software version? A. Reboot when the web browser returns a "page not found" or during the upgrade. B. Browse to the folder level of the file(s) you want to upgrade. C. If you cannot access the codec web interface, try to ping the IP address of the codec from your laptop, TCU, or PC. D. If the web interface does not show when you enter the IP address, be sure that the IP address is different than the IP address at the start of the terminal session. /Reference: : Student Guide Page QUESTION 22 When configuring a Cisco Telepresence Server MSE 8710 blade from the web interface of the MSE 8000 supervisor blade, what is the first thing that you need to do? A. Select the appropriate blade. B. Configure the Ethernet Port A speed and duplex settings. C. Log in to the supervisor blade. D. Assign an IP address to the blade. /Reference: : According to Student Guide Page all four answers are valid. The order in the book is as follows: 1. Log in to the [web interface of the] supervisor blade. 2. Select the appropriate blade. 3. Configure the Ethernet Port A speed and duplex settings. 4. Assign an IP address to the blade. QUESTION 23 When you assemble a Cisco Telepresence T3 system, what is the first step you should take? A. View examples of a completed system structure.

13 B. Cable up and test the components. C. Review the assembly components. D. Follow the "System Assembly Guide" to assemble the system. /Reference: : According to Student Guide Page 1-28 all answers are valid. The order in the book is as follows: 1. Review the assembly components. 2. View examples of a completed system structure. 3. Follow the "System Assembly Guide" to assemble the system. 4. Cable up and test the components. QUESTION 24 Which of these is a feature of the TCU diagnostic function? A. It provides live information for only the TCU, Codec C90, and Cisco Telepresence Server components of the T3 system. B. It provides only historic information for point-to-point and multipoint calls during the last 24 hours. C. It incorporates live and historic information for some of the devices connected to the TCU. D. It incorporates live and historic information for all of the devices connected to the TCU, including network performance from all three codecs. Correct Answer: D /Reference: : Student Guide Page 1-87 QUESTION 25 Which two steps would you follow to initially set the system settings? (Choose two.) A. Log in as the operator. B. Log in as the administrator. C. Use the installation wizard. D. Log in to the Cisco Telepresence Content Server. E. Log in to the device configuration portal. Correct Answer: BC

14 /Reference: : Student Guide Page 1-62 QUESTION 26 Default call rate for T3 per codec without presentation in kbps A B C D Correct Answer: B /Reference: : Student Guide Page