Cisco.Actualtests v by.Brittany.50q. Exam Code: Exam Name: Installing Cisco TelePresence Video Immersive Systems

Size: px

Start display at page:

Download "Cisco.Actualtests v by.Brittany.50q. Exam Code: Exam Name: Installing Cisco TelePresence Video Immersive Systems"

Meredith Marshall
5 years ago
Views:

Cisco.Actualtests.500-005.v2014-11-20.by.Brittany.

1 Cisco.Actualtests v by.Brittany.50q Number: Passing Score: 800 Time Limit: 120 min File Version: Exam Code: Exam Name: Installing Cisco TelePresence Video Immersive Systems

2 Exam B QUESTION 1 Which TX9000 display choice is best for reducing possible issues with viewing angles for conference participants? A. LCD B. plasma C. LED D. CRT E. HDTV Correct Answer: B /Reference: : QUESTION 2 Using the following table, correctly identify the location of each component. Where is each component located? Left Panel Center Panel Right Panel TS4 Codec A1: B1: TS2 Codec TS1 Codec A2: B2: C2: TS3 Codec A. TS2-TS1 left panel - TS4-TS3 right panel B. C. D. Correct Answer: A /Reference: :

QUESTION 3 Which two factors are crucial to the immersive Cisco TelePresence experience? (Choose two.) A. aesthetics B. acoustics C. room shape D. number of windows E. number of active participants F.

3 QUESTION 3 Which two factors are crucial to the immersive Cisco TelePresence experience? (Choose two.) A. aesthetics B. acoustics C. room shape D. number of windows E. number of active participants F. ceiling height Correct Answer: AB /Reference: : QUESTION 4 The control cable for the 42-inch Auto Collaboration display connects to which component? A. PS1 codec B. presentation codec C. LCU D. AV expansion box

Correct Answer: C /Reference: : QUESTION 5 Which of these determines the specific role for each codec? http://www.gratisexam.com/ A. the firmware B. wiring position C. software revision D.

4 Correct Answer: C /Reference: : QUESTION 5 Which of these determines the specific role for each codec? A. the firmware B. wiring position C. software revision D. Cisco Unified Communications Manager configuration Correct Answer: B /Reference: : QUESTION 6 When using the TX9000 AV expansion box, how many total video output signals can be obtained using a single video input? A. one B. two C. three D. four E. five F. six Correct Answer: D

5 /Reference: : QUESTION 7 Which device is connected to the TX9000 AV expansion box for video input? A. presentation (TS4) codec B. collaboration/presentation display C. center (TS1) codec D. built-in video splitter E. left (TS2) and right (TS3) codec Correct Answer: A /Reference: :

6 QUESTION 8 Which three components does the LCU control? (Choose three.) A. the lighting fixture power B. the primary codec AV input controls C. the projector D. the room HVAC controls E. the LCD settings F. the PTZ camera controls G. the yaw of the camera cluster Correct Answer: ACE /Reference: :

7 QUESTION 9 From where does the LCU receive its instructions? A. Cisco TelePresence Touch 12 screen B. center (TS1) codec C. left (TS2) codec D. right (TS3) codec E. presentation (TS4) codec Correct Answer: D /Reference: :

12? A. Favorites section B. Speed Dialing section C.

8 QUESTION 10 The configured speed-dial numbers are located in which section of the Cisco TelePresence Touch 12? A. Favorites section B. Speed Dialing section C. Meeting section D. Settings section Correct Answer: A /Reference: :

9 QUESTION 11 Which hard button on the Cisco TelePresence Touch 12 console is used to end an active call? A. Home button B. Answer Call button C. Manage Call button D. End Call button Correct Answer: B /Reference: : QUESTION 12 Which two options describe the functions of the TX9000 codec? (Choose two.) A. registers with Cisco Unified Communications Manager B. registers with Cisco TelePresence Video Communication Server C. allows a presenter to share a presentation from their laptop D. converts still JPEG files to motion video E. provides a bridge to third-party conference systems F. captures and streams video for surveillance purposes Correct Answer: AC /Reference: : No reference QUESTION 13 Which statement about the TX9000 codec is true? A. The TX9000 allows for SIP and H.323 signaling. B. It uses the Cisco SIP standard. C. It uses HTTPS for configuration. D. It uses HTTP for configuration. E. It uses a cluster of six TX9000 codecs for redundancy. Correct Answer: D /Reference: : First time setup using http. Otherwise https is possible. QUESTION 14 When a new TX9000 system is being installed, where does the TX9000 obtain its system image?

10 A. Cisco TelePresence Video Communication Server B. Cisco Unified Communications Manager C. Cisco TelePresence Management Server D. Domain Name Server E. FTP Correct Answer: B /Reference: : QUESTION 15 The TX9000 should be configured in Cisco Unified Communications Manager as which type of endpoint? A. H.323 B. SIP C. SCCP D. ISDN Correct Answer: B /Reference: : QUESTION 16 When configuring the Device Information section of a new TX9000 in Cisco Unified Communications Manager, which two selections are required to be checked? (Choose two.) A. Use Device Pool Calling Party Transformation CSS B. Retry Video Call as Audio C. Ignore Presentation Indicators (internal calls only) D. Allow Control of Device from CTI E. Logged Into Hunt Group F. Remote Device Correct Answer: BD /Reference: : UN-checked, probably?

QUESTION 17 Which three items must be configured for the TX9000 to automatically obtain the TFTP server? (Choose three.) A. Option 443 ip <ip_address> must be defined in the DHCP server. B.

11 QUESTION 17 Which three items must be configured for the TX9000 to automatically obtain the TFTP server? (Choose three.) A. Option 443 ip <ip_address> must be defined in the DHCP server. B. Choose Automatic in the Use Configuration TFTP Servers entry. C. Choose Specify in the Use Configuration TFTP Servers entry. D. Option 150 ip <ip_address> must be defined in the DHCP server. E. Choose Configuration > IP Settings. Change the DHCP setting to No. F. Choose Configuration > IP Settings. Change the DHCP setting to Yes. Correct Answer: BDF /Reference: : No reference QUESTION 18 Which option allows the TX9000 to receive its configuration and software image from a TFTP server when a DHCP server is not available? A. Use the Cisco TelePresence Touch 12 to configure the TX9000 for TFTP server access. B. Log into the Cisco TelePresence Administration GUI, choose Unified CM Settings, choose Specify in the Use Configuration TFTP Servers entry, enter the IP address or addresses for Cisco Unified Communications Manager in the TFTP Server field(s), and click Apply. C. Log into Cisco Unified Communications Manager and configure the TX9000 from the device configuration web page. D. Log into the local router and configure TFTP server access. Correct Answer: B /Reference: : No reference QUESTION 19 Which TX9000 codec will receive image files from the TFTP server? A. Cisco TelePresence Touch 12 B. right (TS3) codec

12 C. left (TS2) codec D. center (TS1) codec E. presentation (TS4) codec Correct Answer: D /Reference: : No reference QUESTION 20 If no speed-dial numbers are displayed on the Cisco TelePresence Touch 12 Favorites screen, which of these is the cause? A. Numbers need to be added using the Cisco TelePresence Touch 12. B. Numbers are not configured in the Exchange Address Book. C. Numbers need to be manually added to the Address Book using the Cisco TelePresence Administration GUI. D. Numbers are not configured in Cisco Unified Communications Manager. Correct Answer: D /Reference: : No reference QUESTION 21 Refer to the exhibit.

13 Under which configuration components is the TFTP server specified? A. IP Settings B. Network Settings C. Unified CM Settings D. Telephony Settings E. System Settings F. Configuration Issues Correct Answer: C /Reference: : No reference QUESTION 22 Refer to the exhibit.

14 Under which component is the TX9000 configuration restored to factory configuration? A. IP Settings B. Network Settings C. Unified CM Settings D. Telephony Settings E. System Settings F. Configuration Issues Correct Answer: F /Reference: :

QUESTION 23 When fine-tuning the TX9000 displays for optimal performance, what is the primary factor in getting the optimal color temperature for the displays? A. display type B. viewing angles C.

15 QUESTION 23 When fine-tuning the TX9000 displays for optimal performance, what is the primary factor in getting the optimal color temperature for the displays? A. display type B. viewing angles C. room temperature D. room lighting temperature E. display frequency Correct Answer: D /Reference: : Room Design Guide QUESTION 24 Which component is used to calibrate the TX9000 system microphones? A. Cisco TelePresence Administration GUI B. Cisco Unified Communications Manager Administration GUI C. Cisco TelePresence Management Suite Administration GUI D. Cisco TelePresence Video Communication Server Administration GUI Correct Answer: A /Reference: : Install Guide QUESTION 25

16 Which adjustment screw is used on the cameras of a TX9000 to fine-tune the yaw? A. left B. right C. focus D. rotation E. up/down F. zoom Correct Answer: D /Reference: : QUESTION 26 How can TX9000 log information be sent to a remote server? A. Configure an external log location in Cisco Unified Communications Manager. B. Configure an external log location in the Cisco TelePresence Administration GUI. C. Configure the FTP log capture in the Cisco TelePresence Touch 12. D. Configure the remote log server in the Cisco TelePresence Server. Correct Answer: A /Reference:

17 : QUESTION 27 Periodic capture of TX9000 logs is configured in which subsection of the TX9000 device configuration in Cisco Unified Communications Manager? A. Periodic Logging subsection B. External TX9000 Log Destination subsection C. External CTS Log Destination subsection D. SNMP Log Destination subsection Correct Answer: C /Reference: : QUESTION 28

After the TX9000 log files are captured, which file will contain the name of the problem type that was selected from the Select a Problem menu? A. logtroublereason file B. TX9000Prob file C.

18 After the TX9000 log files are captured, which file will contain the name of the problem type that was selected from the Select a Problem menu? A. logtroublereason file B. TX9000Prob file C. problemselect file D. probreasontx9000 file Correct Answer: A /Reference: : No reference QUESTION 29 Refer to the exhibit. Which option is valid to test the LCU of the TX9000 system? A. Displays B. Cameras C. Speakers D. Microphones E. Presentation Devices F. Other Devices Correct Answer: F

/Reference: : LCU is for lighting QUESTION 30 Refer to the exhibit. Which option adjusts the white balance on the left screen? A. Choose Displays, choose Auto Adjust, and choose Done. B.

19 /Reference: : LCU is for lighting QUESTION 30 Refer to the exhibit. Which option adjusts the white balance on the left screen? A. Choose Displays, choose Auto Adjust, and choose Done. B. Choose Cameras, choose Auto Adjust, and choose Done. C. Choose Presentation Devices, choose Auto Adjust, and choose Done. D. Choose Other Devices, choose Auto Adjust, and choose Done. Correct Answer: B /Reference: : No reference QUESTION 31 What is the build number for the following Cisco TelePresence System image? cmterm-cts r-k9.p2.cop.sgn A. 191 B. 68 C. K9 D. 1-68R E. P2 F. 68R Correct Answer: B /Reference: :

QUESTION 32 Which Cisco Unified Communications Manager GUI is used to upload a new Cisco Option Package file before the TX9000 can be upgraded? A. Cisco Unified CM Administration B.

20 QUESTION 32 Which Cisco Unified Communications Manager GUI is used to upload a new Cisco Option Package file before the TX9000 can be upgraded? A. Cisco Unified CM Administration B. Disaster Recovery System C. Cisco Unified Serviceability D. Cisco Unified OS Administration E. Cisco Unified RTMT Correct Answer: D /Reference: : QUESTION 33 Refer to the exhibit.

After the image name was specified for the TX9000 under the Cisco Unified Communications Manager Device Defaults screen, and the TX9000 was restarted, the TX9000 failed to

The image name is incorrect; it is missing the.cop.sgn extensions. C. The image name should be specified under the phone load that was filed in the device configuration. D.

21 After the image name was specified for the TX9000 under the Cisco Unified Communications Manager Device Defaults screen, and the TX9000 was restarted, the TX9000 failed to upgrade to Cisco TelePresence System Which of these caused this issue? A. The image name is incorrect; it is missing the.cop extension. B. The image name is incorrect; it is missing the.cop.sgn extensions. C. The image name should be specified under the phone load that was filed in the device configuration. D. The TFTP service was not restarted. E. The image name should be specified in the Cisco TelePresence System Administration configuration screen under Unified CM Settings. Correct Answer: D /Reference: : QUESTION 34

22 Refer to the exhibit. Which CLI was used to obtain this information? A. show device status B. show status C. show version D. show upgrade E. show system Correct Answer: B /Reference: :

23 QUESTION 35 In order to place a call to 5001 using the CLI, which command is correct? A B. call 5001 C. start 5001 D. call start 5001 E. cstart 5001 Correct Answer: D /Reference: : QUESTION 36 After DHCP is enabled and a new TX9000 system is configured in Cisco Unified Communications Manager, the TX9000 displays an IP address of , which is not what was expected. Which of these should be verified in your troubleshooting of the issue?

A. Your static IP address is configured. B. DNS is configured properly. C. TFTP is enabled in Cisco Unified Communications Manager. D. The device is configured to use SCCP. E.

24 A. Your static IP address is configured. B. DNS is configured properly. C. TFTP is enabled in Cisco Unified Communications Manager. D. The device is configured to use SCCP. E. The device is on a subnet that is separate from Cisco Unified Communications Manager. F. DHCP is enabled in Cisco Unified Communications Manager. Correct Answer: F /Reference: : QUESTION 37 After the initial bootup of a TX9000 system, you notice that the software version on the codec is not what was expected. Which location should be searched to ensure that the desired software is available on the TFTP server for the codec to download? A. Cisco Unified Communications Manager-->Devices B. Cisco Unified OS Administration-->TFTP File Management C. Cisco Unified Communications Manager-->TFTP File Management D. Cisco Unified Communications Manager-->Phones-->Software E. Cisco Unified OS Administration-->Software-->Phones F. Cisco Unified OS Administration-->Firmware Correct Answer: B /Reference: :

QUESTION 38 In which situation would a new TX9000 system boot up as a Cisco TelePresence System 500-32 device? A. no connection to Cisco Unified Communications Manager B. static IP configuration C.

25 QUESTION 38 In which situation would a new TX9000 system boot up as a Cisco TelePresence System device? A. no connection to Cisco Unified Communications Manager B. static IP configuration C. configured as a SIP device in Cisco Unified Communications Manager D. no connection to the other three codecs Correct Answer: A /Reference: : QUESTION 39 Refer to the exhibit. Which option allows for reporting a problem from the TX9000 TelePresence Touch 12? A. Settings B. Recordings C. Media Player D. Doc Cam E. Self View

F. Status Correct Answer: F /Reference: : QUESTION 40 An end user has reported that the TX9000 TelePresence Touch 12 screen does not power down. Which option is the correct response? A. Update the NTP server address and reboot the TX9000 system.

26 F. Status Correct Answer: F /Reference: : QUESTION 40 An end user has reported that the TX9000 TelePresence Touch 12 screen does not power down. Which option is the correct response? A. Update the NTP server address and reboot the TX9000 system. B. Update the Cisco Option Package file, restart the Cisco Unified Communications Manager TFTPservice, and reboot the TX9000 system. C. Update the IP address and reboot the TX9000 system. D. This is expected behavior for the Cisco TelePresence Touch 12. Correct Answer: D /Reference: : QUESTION 41 The TX9000 fails to boot completely and is stuck on Step 5 of seven steps as displayed on the Cisco TelePresence Touch 12. Which step should be implemented to correct the problem? A. Update the IP address and reboot the TX9000 system. B. Update the Cisco Option Package file, restart the Cisco Unified Communications Manager TFTP service, and reboot the TX9000 system. C. Update the NTP server address and reboot the TX9000 system.

D. Delete the TX9000 system from Cisco Unified Communications Manager, add the system back into Cisco Unified Communications Manager, and reboot the TX9000 system.

27 D. Delete the TX9000 system from Cisco Unified Communications Manager, add the system back into Cisco Unified Communications Manager, and reboot the TX9000 system. Correct Answer: B /Reference: : QUESTION 42 If the TX9000 system is experiencing "phantom switching," what should be done to troubleshoot the problem? A. Run the microphone switching test. B. Swap the microphones. C. Replace the AV expansion box. D. Run the microphone calibration procedure. Correct Answer: D /Reference: :

28 QUESTION 43 The TX9000 center speaker connects to which component? A. LCU B. TS1 codec C. AV expansion box D. center codec Correct Answer: C /Reference: :

29 QUESTION 44 The TX9000 left and right speakers connect to which component? A. LCU B. TS1 codec C. AV expansion box D. center codec Correct Answer: B /Reference: :

QUESTION 45 What is causing the Cisco TelePresence Touch 12 to show Project/LCD in error? A. The HDMI cable is not connected between the LCU and the Active Collaboration data display. B.

30 QUESTION 45 What is causing the Cisco TelePresence Touch 12 to show Project/LCD in error? A. The HDMI cable is not connected between the LCU and the Active Collaboration data display. B. The serial cable is not connected between the LCU and the Active Collaboration data display. C. There is a cabling problem with the PS1 codec to the Active Collaboration data display. D. The Active Collaboration data display is powered off. Correct Answer: B /Reference: : No reference QUESTION 46 Which two options cause the presentation to not show on the Active Collaboration data display and show only in PiP on the TX9000 plasma screen? (Choose two.) A. The Active Collaboration data display is powered off. B. There is a VGA cable connection to the presentation computer. C. There is an HDMI cabling problem from TS4 and TS1 to the LCU. D. The PiP button is selected in the Cisco TelePresence Touch 12. E. There is a data display HDMI cable connection problem to the LCU. Correct Answer: CE

31 /Reference: : Not sure. TS4 connected via RJ45 to TS4, not HDMI. Same with display to LCU, it is serial cable. QUESTION 47 What is the function of the Presentation Devices test from the Cisco TelePresence Administration GUI? A. powers on and off the Active Collaboration data display B. configures the Active Collaboration data display C. changes the Active Collaboration data display from 5 to 30 f/s or 30 to 5 f/s during a call D. displays a test pattern on the Active Collaboration screen Correct Answer: D /Reference: : QUESTION 48 When a laptop was connected to the TX9000 presentation codec and the Presentation icon was tapped on the Cisco TelePresence Touch 12, the presentation sharing failed. Which option corrects this issue? A. The video presentation ports need to be enabled in Cisco Unified Communications Manager. B. The presentation sharing can only be done via an immersive Cisco TelePresence endpoint. C. The configuration field 'Allow Presentation Sharing using H.239' needs to be enabled under the device configuration in Cisco Unified Communications Manager. D. The configuration field 'Allow Presentation Sharing using BFCP' needs to be enabled under the device configuration in Cisco Unified Communications Manager. Correct Answer: D /Reference: : No reference QUESTION 49 When the TX9000 boots up, green progress check marks are displayed on the screen. After successful

32 bootup, six check marks are displayed. Which of these can cause the fourth check mark to fail? A. The TX9000 cannot find its configuration and boots up the default configuration of a Cisco TelePresence System ? B. The TX9000 is experiencing network connectivity issues. C. The TX9000 was registered as an H.323 endpoint to Cisco Unified Communications Manager.? D. The TX9000 does not have a directory number assigned. E. The TX9000 is experiencing a compact flash error. Correct Answer: B /Reference: : QUESTION 50 When the TX9000 boots up, green progress check marks are displayed on the screen. After successful bootup, six check marks are displayed. Which of these can cause the last check mark to fail? A. The TX9000 cannot find its configuration and boots up the default configuration of a Cisco TelePresence System ? B. The TX9000 is experiencing network connectivity issues. C. The TX9000 was registered as an H.323 endpoint to Cisco Unified Communications Manager.? D. The TX9000 does not have a directory number assigned. E. The TX9000 is experiencing a compact flash error. Correct Answer: E /Reference: :

Implementing Cisco TelePresence Installations (ITI)

Cisco 642-188 Implementing Cisco TelePresence Installations (ITI) Version: 6.0 QUESTION NO: 1 After connecting to a codec via WebGUI, you are prompted for a username and password. Which username password