New Certification & Training Structure
|
|
- Jeffry Barker
- 6 years ago
- Views:
Transcription
1 New Certification & Training Structure For Building Safety Codes Officers Effective: October 3, 2016
2 New Certification and Training Structure for Building Safety Codes Officers The Safety Codes Council (Council) is implementing a new certification and training structure for Building safety codes officers (SCOs). This booklet explains the new structure and the transition process, as well as answers some frequently asked questions. The new certification structure was developed through consultation with the Building Sub- Council, Building SCOs, and organizations. In the summer of 2012, the Council consulted Building SCOs and their accredited employers about the proposed changes to the certification levels. The new structure approved by the Building Sub-Council reflects the feedback received through the consultation. Changes to the Building SCO certification and training structure introduce a number of benefits for SCOs and accredited organizations. The new structure: establishes a more appropriate scope of practice for new Building SCOs; provides flexibility for Building SCOs and their employers by maintaining separate structural and HVAC certifications; simplifies and clarifies the scopes of practice for Building SCOs; and more closely aligns certification levels used in Alberta with those used for building officials in other provinces and territories. The new structure will come into effect October 3, There will be a one-year transition period during which SCOs can take existing courses in order to transition to the new structure. For certified Building SCOs, transition to the new certification and training structure is voluntary. Existing SCOs will be able to maintain their current certifications after the new structure takes effect. More details on this change, including specific information for certified SCOs, current students, and prospective students, can be found on pages 3 and 4. Council staff are available to answer questions and provide assistance specific to your situation. Please contact us at or , or by at transition@safetycodes.ab.ca. New Certification and Training Structure for Building Safety Codes Officers Page 1
3 New Certifications and Scopes of Practice The new certification structure establishes new certification levels for Building SCOs. The training courses for Building SCOs have also undergone significant revision and reorganization. The new certification levels and their scopes of practice are described in the chart below. Certification Residential (Residential housing except HVAC) Part 9 (Part 9, except HVAC, and Part 10) Part 3 (All buildings except HVAC) HVAC Residential (HVAC systems for residential housing) HVAC All (All HVAC systems) Medical Gas (Medical gas piping systems) Prerequisite: Plumbing Group A and Gas Group A SCO certifications Hydronic Heating (Hydronic heating systems) Prerequisite: Plumbing Group A SCO certification Scope of Practice Houses within the scope of Article (except HVAC systems), and garages and accessory buildings located on the same property as a house within the scope of Article in the edition of the Alberta Building Code (ABC) in force. Buildings within the scope of Part 9 (except HVAC systems) and Part 10 in the edition of the ABC in force. All buildings within the scope of the edition of the ABC in force, except HVAC systems. Includes medical gas piping systems within the scope of the ABC in force. HVAC systems for residential dwellings within the scope of sections 9.32 and 9.33 in the edition of the ABC in force. Includes hydronic heating systems within scope of Part 6 of the edition of the ABC in force. HVAC systems within the scope of Part 6, and sections 9.32 and 9.33 of the edition of the ABC in force. Includes medical gas piping systems within the scope of the ABC in force. Medical gas piping systems within the scope of the edition of the ABC in force. Hydronic heating systems within the scope of Part 6 of the edition of the ABC in force. Page 2 New Certification & Training Structure for Building Safety Codes Officers
4 Implementation and Transition The new Building SCO certification and training structure will be implemented on October 3, 2016, with a one-year transition period which ends October 1, Upon implementation, the new certifications and the new courses will become available. The current courses will also be available during the one-year transition period. Anyone who wants to take current training courses must register in those courses before the end of the transition period. Students will be able to complete those courses after the transition period ends. After the transition period, only the new courses will be available for registration. During the transition period, the Council will offer the current courses listed below at a reduced price of $200 per course to support current students as well as SCOs who voluntarily choose to transition to the new certification levels. Solid-Fuel Burning Appliances (#100033) Water-Based Fire Protection (#100050) Commercial Cooking Ventilation (#100052) Spray Painting Ventilation (#100053) High Rise Measures and Smoke Control Systems (#100054) Ventilation of Swimming Pools (#100055) Part 3 Subjects for a Level 3 SCO (#100039) Fire Alarm Systems (#100040) Exterior Acoustic Insulation (#100037) Medical Gas Piping Systems (#100038) Relocatable Industrial Accommodation (#100036) If you are currently certified and would like to voluntarily transition to the new structure, refer to the charts on page 7 to find out which current courses you need to take. Here s what you need to know As an SCO If you are already certified as a Building SCO, transition to the new certification and training structure is voluntary. You can maintain your current certification until you retire without completing any additional training (aside from regular code update training). The new structure only applies to Building SCOs who decide to voluntarily transition and those who obtain additional certifications after the transition period ends. The Council strongly encourages current Building SCOs to voluntarily transition to the new certification levels during the transition period. The benefit of transitioning before October 2017 is that you will be able to use current courses to be certified under the new structure. If you wait until after the transition period, Implementation and Transition Page 3
5 you will need to take new courses that are required for the new certification level you want to obtain. This may mean repeating some course content that was covered in the current courses. Whether you decide to transition or not, you will still be required to take code update training and any other training mandated by the Building Sub-Council to maintain SCO certification. As a Current Student If you have begun training but have not obtained certification before the new structure is implemented on October 3, 2016, you can register in the current training courses until the end of the transition period. After the transition period ends on October 1, 2017, only the new courses will be available for registration. Council staff are available to provide guidance on specific situations and what courses are required. Students who obtain a current certification during the transition period can maintain that certification until they retire from the system unless they decide to voluntarily transition to the new certification structure or obtain additional certifications after the one-year transition period ends. As a Prospective Student Students who begin taking training after the new structure is implemented on October 3, 2016, will be subject to the new certification structure and can only register for the new training courses. Frequently Asked Questions 1. What happens at the end of the transition period? After the transition period, all certified Building SCOs can maintain their certifications. For example, a Group B Level 1 SCO who decided not to transition to the new structure will be able to maintain Group B Level 1 certification until he retires. A Group B Level 1 SCO who decided to transition to the new HVAC All certification during the transition period will be able to maintain her new HVAC All certification. Current training courses will not be available for registration after the transition period ends. Those who want to become Building SCOs, and Building SCOs who want to obtain additional certifications, will do so within the new certification and training structure. 2. How does the new certification and training structure streamline the training and reduce costs for students and employers? The new Residential and HVAC Residential certification levels require fewer courses to become certified as an SCO. This will allow an applicant to begin working as an SCO sooner. The new Hydronic Heating certification will allow Plumbing and Gas SCOs to perform inspections under the building code without the full course requirement needed to become certified as a Building SCO. The separate structural and HVAC certifications in the new structure will provide flexibility for Building SCOs and their employers. Page 4 New Certification & Training Structure for Building Safety Codes Officers
6 3. How do the new certification levels compare to those used in other provinces and territories? The new certifications are more closely aligned with the certification levels used in other provinces and territories. This approach is consistent with Alberta s labour mobility obligations under the New West Partnership Trade Agreement and national Agreement on Internal Trade. This makes it easier for SCOs certified in Alberta to work in other provinces and territories. 4. How is certification and training for relocatable industrial accommodation changing? Currently, there is a stand-alone certification for relocatable industrial accommodation. An individual must already be certified as a Group A Level 1 Building SCO to be eligible for this certification. A stand-alone certification for relocatable industrial accommodation is not offered under the new certification structure. Instead, this course is included in the training required for certification as a Part 9 Building SCO. This change simplifies the certification and training structure and provides Building SCOs with more awareness of the different systems and materials that they might encounter while conducting plans reviews or inspections of structures that fall within their scope of practice. Please note that the relocatable industrial accommodation course is still available for individuals who do not want to become a Building SCO but require this training for other purposes. 5. How is certification and training for exterior acoustic insulation changing? Currently, there is a stand-alone certification for exterior acoustic insulation and an individual must already be certified as a Group A Level 1 Building SCO to be eligible for this certification. A stand-alone certification for exterior acoustic insulation is not offered under the new certification structure. Instead, this course is included in the training required for certification as a Residential Building SCO. This change simplifies the certification and training structure and provides Building SCOs with more awareness of the different systems and materials that they might encounter while conducting plans reviews or inspections of structures that fall within their scope of practice. 6. How is certification and training for medical gas piping systems changing? Currently, there is a stand-alone certification for medical gas piping systems and an individual must already be certified as Group A Level 3 or Group B Level 3 to be eligible for this certification. Under the new certification structure, Building SCOs will receive training on medical gas piping to obtain Part 3 or HVAC All certifications. The stand-alone medical gas certification will be maintained. Going forward under the new structure, only individuals certified as both Group A Plumbing and Group A Gas SCOs will be eligible to obtain this certification. This change was made based on consultation with the Building and Plumbing Sub-Councils. Although the technical requirements for medical gas piping systems are included in the Alberta Building Code, these systems are closely related to the plumbing and gas disciplines. Frequently Asked Questions Page 5
7 This change gives accredited organizations flexibility to assign either a Plumbing and Gas SCO or a Building SCO to inspect these systems within their jurisdiction. 7. Why does the new certification and training structure include a stand-alone certification for hydronic heating systems? Currently, training for hydronic heating systems is required for Group B Level 1 certification and there is no stand-alone certification. Under the new certification structure, hydronics training is required to obtain HVAC Residential certification. However, some accredited organizations currently require their Plumbing SCOs to be certified as Building SCOs for the sole purpose of inspecting hydronic heating systems. Establishing a new stand-alone hydronics certification supports accredited organizations that use this practice. The new stand-alone hydronics certification will require Plumbing Group A certification as a prerequisite and will allow Plumbing SCOs to inspect hydronic heating systems without obtaining a full Building SCO certification. At the same time, Building SCOs can inspect hydronic heating systems if they have HVAC Residential or HVAC All certification. This change gives accredited organizations flexibility to decide who will inspect these systems within their jurisdiction. 8. How can an SCO find out more information or ask questions about the new certification and training? Contact the Council at or , or by at transition@safetycodes.ab.ca. Page 6 New Certification & Training Structure for Building Safety Codes Officers
8 Courses Needed for Existing SCOs to Transition If an SCO would like to be certified under the new structure, the following information identifies the current courses needed to transition from their level of certification (e.g. Group A Level 1) to the most equivalent level in the new certification structure (e.g. Part 9). Transitioning to the new certification levels using the current courses ensures that you will not be required to repeat any previously completed training. If you have questions about your specific situation, please contact us at or , or by at transition@safetycodes.ab.ca. Group A Level 1 Part 9 Courses Required for Transition: Solid-Fuel Burning Appliances Relocatable Industrial Accommodation Exterior Acoustic Insulation Group A Level 2 Part 3 Courses Required for Transition: Group A Level 3 Courses Relocatable Industrial Accommodation Medical Gas Piping Systems Solid-Fuel Burning Appliances Exterior Acoustic Insulation Courses Needed for Existing SCOs to Transition Page 7
9 Group A Level 3 Part 3 Courses Required for Transition: Relocatable Industrial Accommodation Medical Gas Piping Systems Solid-Fuel Burning Appliances Exterior Acoustic Insulation Group B Level 1 Hydronic Heating No Courses Required for Transition. Group B Level 2 HVAC All Courses Required for Transition: Group B Level 3 courses Medical Gas Piping Systems Group B Level 3 HVAC All Courses Required for Transition: Medical Gas Piping Systems Page 8 New Certification & Training Structure for Building Safety Codes Officers
10 #1000, Jasper Avenue N.W. Edmonton, Alberta T5J 3S9 Phone / Fax / safetycodes.ab.ca
NEW FIRE CERTIFICATION AND TRAINING STRUCTURE FREQUENTLY ASKED QUESTIONS
NEW FIRE CERTIFICATION AND TRAINING STRUCTURE FREQUENTLY ASKED QUESTIONS Why has fire experience been removed from the requirements? Fire experience was removed based on the recommendation of the Fire
More informationHEATING TECHNICIAN INDUSTRY TRAINING PROGRAM PROFILE RECOGNIZED PROGRAM. Occupation Description. Pathways to Certification. Recommended Education
HEATING TECHNICIAN Occupation Description means a person who performs construction related tasks in the residential market dealing with the design, installation and servicing of heating, ventilation and
More informationINSULATOR (HEAT AND FROST)
INSULATOR (HEAT AND FROST) INDUSTRY TRAINING PROGRAM PROFILE Occupation Description s (Heat and Frost) work with different kinds of insulating material to prevent or reduce the passage of heat, cold, vapour,
More informationCOURSE SYLLABUS ADMINISTRATION AND COMPLIANCE MONITORING CORRESPONDENCE COURSE
COURSE SYLLABUS ADMINISTRATION AND COMPLIANCE MONITORING CORRESPONDENCE COURSE 100119 Description There are three core areas of competency with the Alberta Building Code (ABC) that a safety codes officer
More informationG R E E N PLUMBING D E S I G N Candidate Bulletin
GREEN PLUMBING DESIGN Candidate Bulletin PROGRAM OVERVIEW The Green Plumbing Design (GPD) certificate program, sponsored by the American Society of Plumbing Engineers and the International Association
More informationPetroleum Mechanic Certification Program Policies and Procedures
Certification Program Effective: Document Uncontrolled if Printed Table of Contents 1. Background... 3 2. Certificate Requirements... 3 3. Training Standards... 4 4. Certification Rights, Privileges and
More informationPolicies and Procedures. 636G Apprenticeship. Gas Technician Certification
Policies and Procedures (under Ontario Regulation 215/01, Technical Standards and Safety Act, 2000) Technical Standards and Safety Authority (TSSA) Fuels Safety Training and Certification www.tssa.org
More informationFAMI-QS VERSION 6 TRANSITION REQUIREMENTS
Quality and Safety System for Specialty Feed Ingredients FAMI-QS VERSION 6 TRANSITION REQUIREMENTS P-MS-002/ Rev 01 2017-12-20 TABLE OF CONTENTS 1. Introduction... 3 2. FAMI-QS Code Version 6... 3 2.1.
More informationSTATE OF CONNECTICUT DEPARTMENT OF CONSUMER PROTECTION 165 Capitol Avenue Hartford, CT 06106
STATE OF CONNECTICUT DEPARTMENT OF CONSUMER PROTECTION 165 Capitol Avenue Hartford, CT 06106 RESIDENTIAL PROPERTY CONDITION DISCLOSURE REPORT Name of Seller(s): Property Street Address: Property Municipality:
More informationCourse BIM MEP Diploma Revit MEP Navis Works
Course BIM MEP Diploma Revit MEP Navis Works BIM Electromechanical Diploma : BIM MEP diploma maximize the BIM workflow optimization and gives the engineer the full capabilities to perform MEP Model consists
More informationUse of Standards and Conformity Assessment in U.S. Regulation: Perspective of the Private Sector
Use of Standards and Conformity Assessment in U.S. Regulation: Perspective of the Private Sector Standards Alliance Peru Workshop on Regulatory Decision Making October 29-30, 2014 Presentation Objectives
More informationWATER WELL DRILLER INDUSTRY TRAINING PROGRAM PROFILE RECOGNIZED PROGRAM. Occupation Description. Pathways to Certification. Recommended Education
WATER WELL DRILLER Occupation Description Water Well refers to a person who sets up and operates mobile equipment used to drill residential commercial and industrial water wells. In addition, they conduct
More informationHow the Sausage is Made: The RESNET Standards Development Process. Thiel Butner and Rick Dixon
How the Sausage is Made: The RESNET Standards Development Process Thiel Butner and Rick Dixon Acronyms ANSI = American National Standards Institute BoD = Board of Directors BSR = Board of Standards Review,
More informationINSULATOR (HEAT & FROST) (HEAT & FROST INSULATOR)
INSULATOR (HEAT & FROST) (HEAT & FROST INSULATOR) Occupation Description Heat and Frost Insulator means a person who covers exposed surfaces of pipes, steam generators, ducts, process vats and related
More informationSTATE OF CONNECTICUT DEPARTMENT OF CONSUMER PROTECTION 450 Columbus Blvd, Suite 901 Hartford, CT 06103
STATE OF CONNECTICUT DEPARTMENT OF CONSUMER PROTECTION 450 Columbus Blvd, Suite 901 Hartford, CT 06103 RESIDENTIAL PROPERTY CONDITION DISCLOSURE REPORT The Uniform Property Condition Disclosure Act (Connecticut
More informationCONSTRUCTION ELECTRICIAN
CONSTRUCTION ELECTRICIAN Occupation Description Construction s plan, design, assemble, install, alter, repair, inspect, verify, commission, connect, operate, maintain and decommission electrical systems.
More informationGold: points Platinum: 80+ points. Certified: points Silver: points
What is LEED? LEED, or Leadership in Energy & Environmental Design, is redefining the way we think about the places where we live, work and learn. As an internationally recognized mark of excellence, LEED
More informationSUB-CONTRACTOR PRE-QUALIFICATION FORM
CONTACT INFORMATION Company Contact Person: Title: Street Address: Suite No.: EXPERIENCE City: Zip: 1. Please check the CSI Codes applicable to your business: 02 00 00 Existing Conditions 02 20 00 Assessment
More informationPETROLEUM EQUIPMENT INSTALLER
PETROLEUM EQUIPMENT INSTALLER Occupation Description s work in the downstream petroleum sector of the oil and gas industry. They install and remove storage tanks and transfer, handle and dispense equipment
More informationLake Waccamaw Building Inspections Fees
` Lake Waccamaw Building Inspections Fees RESIDENTIAL BUILDING PERMIT SINGLE FAMILY DWELLING DUPLEX TOWNHOUSE MODULAR ( HOMES ) HOME ADDITION ACCESSORY BUILDING ALL UNHEATED AREA $0.20 per sq. ft. MINIMUM
More informationNational Research Council of Canada 2006 Safety Codes Council 2010 (Alberta specific intent and application statements)
Disclaimer This guide was created through funding provided by the Safety Codes Council and Alberta Municipal Affairs. The intent and application statements contained within this guide provide useful explanatory
More information{(. }.) Ordinance Fact Sheet 'P..o... ~~
~ P':~ of PAS-1 ~~ {(. }.) Ordinance Fact Sheet 'P..o... ~~ ~ o~" TO: CITY COUNCIL DATE: January 28, 2019 FROM: CITY ATTORNEY SUBJECT: AN ORDINANCE OF THE CITY OF PASADENA AMENDING PASADENA MUNICIPAL CODE
More informationAUTOMOTIVE SERVICE TECHNICIAN
AUTOMOTIVE SERVICE TECHNICIAN Occupation Description s possess the full range of knowledge and abilities required to perform preventative maintenance, diagnose problems and repair vehicle systems including
More informationFACILITY COMPONENTS - MIDDLE SCHOOL
SITE AREAS Parking and Access - Buses 4.0 2.0 0.59 Parking and Access - Serv. / Delivery 3.0 1.0 0.22 Parking and Access - Staff 4.0 3.0 0.89 Parking and Access - Visitors 4.0 3.0 0.89 Parking and Access
More informationCalCERTS Title 24 & Whole House Rater HERS Certification Training Overview. CalCERTS HERS Rater Certification Courses
CalCERTS Title 24 & Whole House Rater HERS Certification Training Overview CalCERTS has been approved by the California Energy Commission to act as a Home Energy Rating System Provider. As such, CalCERTS
More informationTechnical Standards and Safety Authority. Policies and Procedures: Record of Training Policy Document
Technical Standards and Safety Authority Policies and Procedures: Record of Training Policy Document Table of Contents Policies and Procedures Introduction...1 Background and Intent...1...1 Instructor
More informationConference for Food Protection. Standards for Accreditation of Food Protection Manager Certification Programs. Frequently Asked Questions
Conference for Food Protection Standards for Accreditation of Food Protection Manager Certification Programs Frequently Asked Questions Q. What was the primary purpose for the Conference for Food Protection
More informationSPRINKLER FITTER INDUSTRY TRAINING PROGRAM PROFILE ACCREDITED PROGRAM HARMONIZED PROGRAM. Occupation Description. Pathways to Certification
SPRINKLER FITTER Occupation Description s lay out, install, repair, modify, inspect, test and maintain fire protection systems in a variety of buildings and settings. They work on fire protection systems
More informationCONSTRUCTION CRAFT WORKER (LABOURER)
CONSTRUCTION CRAFT WORKER (LABOURER) Occupation Description A works mostly on construction sites in residential, institutional, commercial, and industrial settings, including pipelines, utilities, hydroelectric
More informationFIRE SAFETY GUIDELINES
FSG 1:2013 FIRE SAFETY AND SHELTER DEPARTMENT SINGAPORE CIVIL DEFENCE FORCE FIRE SAFETY GUIDELINES FSG 1:2013 CERTIFICATION OF REGULATED FIRE SAFETY PRODUCTS & MATERIALS (REVISED PROCEDURES) Effective
More informationDUKE UNIVERSITY CONSTRUCTION STANDARDS
1 00 01 10 Table of Contents DIVISION 00: PROCUREMENT AND CONTRACTING REQUIREMENTS 00 01 10 Table of Contents 06.17.2014 00 21 13 Instructions to Bidders 11.08.2013 00 22 13 Supplementary Instructions
More informationARCHITECTURAL SHEET METAL WORKER
ARCHITECTURAL SHEET METAL WORKER Occupation Description means a person who has the product knowledge and skills to prepare, repair and fabricate components for; metal roofs, metal walls and other exterior
More informationPassed unanimously at the Plenary Session of the ACA Board of Directors meeting on June 14, 2009.
Safety Education & Instruction Department First Aid & CPR Requirement June 13-14, 2009 ACA Board of Directors Meeting New ACA Board Motion: All ACA Instructors, Instructor Trainers, and Instructor Trainer
More informationSafely isolating and re-establishing electrical supplies
Safely isolating and re-establishing electrical supplies Course handbook Cert-ain Certification Ltd. Introduction Cert-ain Certification Ltd. is a certification body accredited by the regulatory authorities
More informationRegistration Procedures
Registration Procedures April 2016 Effective April 27, 2016 Procedures Contents 1.0 Introduction Pg 3 2.0 Membership Types and Requirements Pg 4 2.1 Registered Professional Forester Membership - Forester
More informationMANITOBA LANDFILL OPERATOR CERTIFICATION PROGRAM SUSTAINABLE DEVELOPMENT
MANITOBA LANDFILL OPERATOR CERTIFICATION PROGRAM MANITOBA SUSTAINABLE DEVELOPMENT 2017 TABLE OF CONTENTS FOREWORD... 3 Landfill Operator Certification Program Overview... 4 DEFINITIONS... 5 1.0 PROGRAM
More informationPetroleum Mechanic Certification Program Policies and Procedures
Certification Program Revisions Effective: June 11, 2015 Document Uncontrolled if Printed Table of Contents 1. Background... 3 2. Certificate Requirements... 4 3. Training Standards... 4 4. Practical Skills/Experience
More informationMEIengineering, inc. mechanical electrical industrial consultants South Main Street, Harrisonburg, VA (540)
COMPANY RESUME MEIengineering, inc. mechanical electrical industrial consultants 1780 South Main Street, Harrisonburg, VA 22801 (540) 432-6272 www.meiengineeringinc.com 2018 About our Firm Founded in 1989,
More informationInvestigation. City of Edmonton Office of the City Auditor. ETS Workforce Development. January 14, 2019
City of Edmonton Office of the City Auditor Investigation ETS Workforce Development January 14, 2019 1200, Scotia Place, Tower 1 10060 Jasper Ave Edmonton, AB T5J 3R8 Phone: 780-496-8300 edmonton.ca/auditor
More informationAPPLICATION FOR CERTIFICATE OF QUALIFICATION
APPLICATION FOR CERTIFICATE OF QUALIFICATION City of Kansas City, Missouri Application fee: $55.00 City Planning & Development Department Exam fee: To be paid directly to testing agency* Development Services
More informationHEAVY DUTY EQUIPMENT TECHNICIAN
Canadian Council of Directors of Apprenticeship Harmonization Project HEAVY DUTY EQUIPMENT TECHNICIAN Nova Scotia Apprenticeship Agency Industry Consultation February 25, 2015 Overview - Current Heavy
More informationGrade 10 or equivalent including English 10, Mathematics 10 and Science 10 Preferred: Grade 12
PROFESSIONAL COOK 1 Occupation Description Cook means a person who performs all phases of kitchen activities including the preparation and presentation of vegetables, soups, sauces, meat, fish and poultry,
More informationContractor Licensing Offered by Brightwood Career Institute, Harrisburg
Minnesota Contractor Licensing Offered by Brightwood Career Institute, Harrisburg Contractor Licensing and EPA Lead-Safe Certification 2017 Course Catalog Trust the industry leader with your Contractor
More informationInstruction Responsibilities of Certified Operations Changing Certifying Agents
National Organic Program Washington, DC 20250 Page 1 of 5 Instruction Responsibilities of Certified Operations Changing Certifying Agents 1. Purpose This instruction document establishes U.S. Department
More informationSLI Compliance ONC-ATL Testing Program Guide
SLI Compliance A Division of Gaming Laboratories International, LLC 4720 Independence St. Wheat Ridge, CO 80033 303-422-1566 www.slicompliance.com SLI Compliance ONC-ATL Testing Program Guide Document
More informationPART IV GLOSSARY OF TERMS
PART IV GLOSSARY OF TERMS Terms and Definitions For the purposes of this document, the following terms and definitions shall apply: PROCESS MANUAL FOR THE GFSI BENCHMARKING PROCESS V7.2 Introduction Purpose
More informationJanuary Alberta Carbon Registries
January 2017 Alberta Carbon Registries User Manual v1.0 Version History Revision Date Version January 10, 2017 1.0 P a g e 2 of 35 Contents Overview... 5 About... 5 Alberta Emission Offset Registry...
More informationGrade 12 or equivalent including English 12, Algebra 11 or Trade Mathematics 11, and Physics 11 or Science & Technology 11
PLUMBER Occupation Description means a person who installs, alters or repairs any plumbing system including all work usually done by a journeyperson plumber governed by the BC Plumbing Code. For detailed
More informationTechnical Standards and Safety Authority. Policies and Procedures: Record of Training Policy Document
Technical Standards and Safety Authority : Record of Training Policy Document This document is uncontrolled if printed Contents... 1 of Training Providers/Organizations for Record of Training (ROT)...
More informationNOT PROTECTIVELY MARKED SUPPLIER REGISTRATION FORM
SUPPLIER REGISTRATION FORM Thank you for taking the time to complete the Horizon Supplier Registration form. Please contact suppliers@horizonnuclearpower.com if additional assistance is required. Highlighted
More informationWINTER SPRING SUMMER FALL
Join us for our ADULT EDUCATION OPEN HOUSE THURSDAY, FEB 22 FROM 10AM - 7PM THURSDAY, MAR 22 FROM 10AM - 7PM THURSDAY, APR 19 FROM 10AM - 7PM THURSDAY, MAY 17 FROM 10AM - 7PM THURSDAY, JUNE 14 FROM 10AM
More informationSECURITY SYSTEMS TECHNICIAN
SECURITY SYSTEMS TECHNICIAN Occupation Description System means a person who designs, installs, repairs, maintains, replaces, tests, services the operation of all electronic security systems in accordance
More informationProfessional Experience
Eirene Knott, MCP, CBO, CFM 913-236-3361 eirene.knott@brrarch.com Qualifications: Professional - Bachelor of Science in Construction Science with a Minor in Planning, Master of Science in Management. Over
More informationPractice Guidelines from Other Canadian Jurisdictions. The Association of Professional Engineers and Geoscientists of Alberta (
Jan, 2017 Practice Guidelines from Other Canadian Jurisdictions Jurisdiction Guideline Name Main Discipline Revision Date Comments The Association of Professional and of Alberta (www.apega.ca) Authenticating
More informationMultiple Dwellings $.25/sq ft Building of Non-Residential Occupancy (New Building) $.30/sq ft
Fee Schedule for Building and Zoning Compliance Permits Extract from Executive Law, Article 18 and Section 383: "...each municipality...is expressly authorized and empowered to make, amend and repeal rules
More informationData protection. A brief guide to notification
Data protection A brief guide to notification Contents 3 Contents Introduction What is the Data Protection Act 1998? 4 Frequently asked questions 6 Notification exemptions 10 A self-assessment guide 10
More informationSilicon Valley Power Data Center Program Rebate Application
Contact Information Tax Status (check one) Sole Proprietor Contact Name Phone Corporation Partnership Company Email address Government Not-For-Profit Customer/Facility Information Company Name SVP Account
More informationHarris County Onsite Wastewater Seminar. NSF International 2015
Harris County Onsite Wastewater Seminar NSF International 2015 Accreditation vs. Certification defined Brief overview of NSF Purpose and Value of Technology Approval Certification Process Questions Accreditation
More informationGENERAL GASFITTER Licensing Examination Information
GENERAL GASFITTER Licensing Examination Information General Gasfitter is not a designated trade in Saskatchewan. The General Gasfitter examination is administered as a partnership with the Ministry of
More informationDigital Multimeter Safety Tips
Digital Multimeter Safety Tips Most engineers perform measurements with a digital multimeter (DMM) as part of their job. Before you grab the nearest handheld DMM next time, make sure you select the right
More informationCertified Trainer Program Guide
Certified Trainer Program Guide You can maximize your training opportunities by becoming a Sage certified trainer (CT). This unique program is designed for employees of Sage Software business partners
More informationINDUSTRY TRAINING PROGRAM PROFILE ACCREDITED PROGRAM WELDER
WELDER Occupation Description Welder means a person who has training in and is capable of welding ferrous and non-ferrous metals in all positions, on both plate and/or pipe, using various welding processes.
More informationAmusement Device Mechanic Policies and Procedures
Document Uncontrolled if Printed Table of Contents 1. Background... 3 2. Definitions... 3 3. Certification Categories... 4 4. Certification Rights, Privileges and Obligations... 4 5. Practical Skills/Experience
More informationMedicare Enrollment Application Submission Options
The Basics of Internet-based Provider Enrollment, Chain and Ownership System (PECOS) for Durable Medical Equipment, Prosthetics, Orthotics, and Supplies (DMEPOS) Suppliers Beginning October 4, 2010, the
More informationTDMI Training is accredited training providers of EWSeta and well respected as a reputable training facility.
INSTALLATION RULES TDMI Training is accredited training providers of EWSeta and well respected as a reputable training facility. TDMI Training provides specialized and personalized training solutions to
More informationUSDA ISO Guide 65 Program Accreditation for Certification Bodies
Page 1 of 6 USDA ISO Guide 65 Program Accreditation for Certification Bodies 1 Purpose This document provides the requirements to be met in designing a USDA ISO Guide 65 Program. It also provides the requirements
More informationMinimum Qualifications for Special Inspectors, Fabricators, Special Inspection Agencies, Testing Labs and Laboratory Technicians
Minimum Qualifications for Special Inspectors, Fabricators, Special Inspection Agencies, Testing Labs and Laboratory Technicians City of Novi Community Development Building Division 1 A. FABRICATORS A.1.
More informationDOE Solar Water Heating Market Expansion Workshop
DOE Solar Water Heating Market Expansion Workshop Jane M. Weissman Interstate Renewable Energy Council January 18-19, 2007 San Diego, CA jane@irecusa.org www.irecusa.org Raising the professional bar Certifying
More informationTHE ALBERTA CONSTRUCTION SAFETY ASSOCIATION S HEALTH & SAFETY ADMINISTRATOR DESIGNATION
THE ALBERTA CONSTRUCTION SAFETY ASSOCIATION S HEALTH & SAFETY ADMINISTRATOR DESIGNATION Alberta Construction Safety Association 03 04 05 06 08 10 Health & Safety Administrator (HSA) Introduction Program
More informationBATON TRAINING COURSE ACCREDITATION Guidelines for Accreditation Application
BATON TRAINING COURSE ACCREDITATION Guidelines for Accreditation Application GENERAL INFORMATION The Security Services and Investigators Act (SSIA) focuses on providing higher standards for the security
More informationTECHNICAL NOTE RECOGNITION OF APPLIED CIVIL ENGINEERING SKILLS
TECHNICAL NOTE RECOGNITION OF APPLIED CIVIL ENGINEERING SKILLS Authors: Andrew Taylor Communications Manager InfraTrain New Zealand Limited Tel 04 494 1883 andrew@infratrain.co.nz Alister Harlow Chairman
More informationPARTS AND WAREHOUSING PERSON 1
PARTS AND WAREHOUSING PERSON 1 Occupation Description " " refers to an individual who performs basic warehousing functions which include basic materials handling of all warehouse items, including automotive
More informationINDUSTRIAL ELECTRICIAN
INDUSTRIAL ELECTRICIAN Occupation Description Industrial s inspect, install, test, troubleshoot, repair, and service industrial electrical equipment and associated electrical and electronic controls. Service
More informationNEW JERSEY DEPARTMENT OF AGRICULTURE
NEW JERSEY DEPARTMENT OF AGRICULTURE Division of Food and Nutrition School Nutrition Programs SCHOOL NUTRITION ELECTRONIC APPLICATION AND REIMBURSEMENT SYSTEM (SNEARS) USER MANUAL If you are having problems
More informationSTATE OF CALIFORNIA TITLE 24 LIGHTING CONTROLS ACCEPTANCE TESTING
STATE OF CALIFORNIA TITLE 24 LIGHTING CONTROLS ACCEPTANCE TESTING Technician Skills & Responsibilities Compliance Documentation Installation Requirements Acceptance Test Procedures Training Program Version
More informationINDUSTRIAL ELECTRICIAN
INDUSTRIAL ELECTRICIAN Occupation Description "Industrial Electrician" means a person who inspects, installs, tests, troubleshoots, repairs, and services industrial electrical equipment and associated
More informationINAB Mandatory and Guidance Documents Policy and Index
INAB Mandatory and Guidance s Policy and Index This publication is aimed at assisting in determining what documents are relevant to various organisations and at providing contact points for accessing such
More informationCONSTRUCTION ELECTRICIAN
CONSTRUCTION ELECTRICIAN Occupation Description Construction means a person who installs, constructs, alters, repairs, maintains, commissions, tests, services, calibrates and operates related electrical
More informationAUTOMOTIVE GLASS TECHNICIAN
AUTOMOTIVE GLASS TECHNICIAN Occupation Description means a person who removes, installs, repairs, and generally services all types of stationary and movable glass in motor vehicles and associated equipment.
More informationNC CODE OFFICIALS QUALIFICATION BOARD
NC CODE OFFICIALS QUALIFICATION BOARD BUILDING CODE HISTORY 1905 - FIRST BUILDING CODE ESTABLISHED TO PROVIDE MINIMUM CONSTRUCTION AND DESIGN METHODS IN TOWNS WITH A POPULATION OVER 1,000. 1933 CREATION
More informationInformation Technology Disaster Recovery Planning Audit Redacted Public Report
1200, Scotia Place, Tower 1 10060 Jasper Avenue Edmonton, Alberta T5J 3R8 edmonton.ca/auditor Information Technology Disaster Recovery Planning Audit Redacted Public Report June 12, 2018 City of Edmonton
More informationSPRINKLER SYSTEM INSTALLER
SPRINKLER SYSTEM INSTALLER Occupation Description means a person who installs, alters or repairs automatic, deluge or pre-action sprinklers; foam, fog, and carbon dioxide systems; wet or dry standpipes;
More informationPolicy for Accrediting Assessment Bodies Operating within the Cradle to Cradle Certified Product Certification Scheme. Version 1.2
Policy for Accrediting Assessment Bodies Operating within the Cradle to Cradle Certified Product Certification Scheme Version 1.2 July 2015 Copyright, Cradle to Cradle Products Innovation Institute, 2015
More informationINDUSTRY TRAINING PROGRAM PROFILE ACCREDITED PROGRAM WELDER
WELDER Occupation Description Welder means a person who has training in and is capable of welding ferrous and non-ferrous metals in all positions, on both plate and/or pipe, using various welding processes.
More informationContinuing Professional Development Program Guidelines
Continuing Professional Development Program Guidelines Much of what is learned in obtaining a qualification in today s rapidly changing business environment can quickly become obsolete. Most would agree
More informationCOOK (PROFESSIONAL COOK 3)
COOK (PROFESSIONAL COOK 3) Occupation Description Cook means a person who performs all phases of kitchen activities including the preparation and presentation of vegetables, soups, sauces, meat, fish and
More information10/12/17. CPA Alberta Professional and Public Accounting Practice Varied Registration Model CPA FORUM NORTH OCTOBER 23 RD, 2017 JASPER, ALBERTA
CPA Alberta Professional and Public Accounting Practice Varied Registration Model CPA FORUM NORTH OCTOBER 23 RD, 2017 JASPER, ALBERTA Larry Brownoff CPA, CA Director, Professional and Career Services Professional
More informationIT Governance ISO/IEC 27001:2013 ISMS Implementation. Service description. Protect Comply Thrive
IT Governance ISO/IEC 27001:2013 ISMS Implementation Service description Protect Comply Thrive 100% guaranteed ISO 27001 certification with the global experts With the IT Governance ISO 27001 Implementation
More information[GREEN JOB PROGRAMS AT CLC]
Engineering, Math and Physical Architectural Technology Civil & Environmental Technology Construction Management Technology Plan 24CB Plan 24CF Plan 24VA Plan 24BA Plan 24BF 62 Part of program 34 Part
More informationPersonnel Certification
Personnel Certification Facilitating the Growth of a Global Economy Roy A. Swift, Ph.D. Senior Director, Personnel Credentialing Accreditation Programs American National Standards Institute Building a
More informationBOILERMAKER (CONSTRUCTION BOILERMAKER)
BOILERMAKER (CONSTRUCTION BOILERMAKER) Occupation Description Construction Boilermaker means a person who does the laying out, burning, shearing, sawing, cutting, punching, drilling, reaming, boring, rapping,
More informationBARMELCO ELECTRICAL PTY LTD CAPABILITY STATEMENT BARMELCO ELECTRICAL PTY LTD CAPABILITY STATEMENT 1
BARMELCO ELECTRICAL PTY LTD CAPABILITY STATEMENT BARMELCO ELECTRICAL PTY LTD CAPABILITY STATEMENT 1 ABOUT US OUR ADVANTAGE Barmelco Electrical is a 100% Indigenous-owned and operated electrical contracting
More informationSUPPLIER ACCREDITATION APPLICATION FORM
SUPPLIER ACCREDITATION APPLICATION FORM Company Name: Registered Address: Satellite Office: Warehouse Address: Telephone No.(s) : Fax No: Website Address : E-mail Address: Contact Person: DTI/SEC. Reg.No:
More informationTOOL AND DIE MAKER INDUSTRY TRAINING PROGRAM PROFILE ACCREDITED PROGRAM. Occupation Description. Pathways to Certification.
TOOL AND DIE MAKER Occupation Description Tool and Die Maker means a person who makes, repairs and tests dies, cutting tools, jigs, fixtures, moulds, gauges and special hand tools by laying out, setting-up,
More informationSCHOOL FACILITIES CERTIFICATION PROGRAM PROGRAM REQUIREMENTS
SCHOOL FACILITIES CERTIFICATION PROGRAM The New Hampshire Association of School Business Officials (NHASBO) offers our School Facilities Certification Program through a partnership with the Texas Association
More informationHEALTH AND SAFETY PROGRAM 207 Permit Writer Certification Procedure
Page 1 of 11 1.0 PURPOSE Axiall, Plaquemine Complex, has developed this procedure to establish guidelines and protocols to certify Safe Work Permit Writers and Confined Space Entry Supervisors. 2.0 SCOPE
More informationClient Services Procedure Manual
Procedure: 85.00 Subject: Administration and Promotion of the Health and Safety Learning Series The Health and Safety Learning Series is a program designed and delivered by staff at WorkplaceNL to increase
More informationMission Statement & Company Overview
STP_SOLUTIONS_Services_Brochure 13/09/2011 14:22 Page 1 SPECIALISTS IN PROVIDING NATIONWIDE WORKSPACE SOLUTIONS OFFICE REFURBISHMENT DATA CENTRES / DISASTER RECOVERY SITES ELECTRICAL & MECHANICAL INSTALLATIONS
More informationAtlantic Bylaw Officers Association
Atlantic Bylaw Officers Association Certification Program Page 1 of 18 Table of Contents The ABOA Certification Program... 3 Introduction... 3 Pre-Requisites when Applying for Certification... 9 Experience...
More informationSenate Comprehensive Energy Bill
Senate Comprehensive Energy Bill Both the House and Senate energy committees are currently in the process of developing comprehensive energy bills. The Senate Energy and Natural Resources Committee released
More information