ELECTRICAL EXAM KIT REV Oct 2012 FIELD SAFETY REPRESENTATIVE CLASS RE REFRIGERATION MECHANIC

Size: px
Start display at page:

Download "ELECTRICAL EXAM KIT REV Oct 2012 FIELD SAFETY REPRESENTATIVE CLASS RE REFRIGERATION MECHANIC"

Transcription

1 ELECTRICAL EXAM KIT REV Oct 2012 FIELD SAFETY REPRESENTATIVE CLASS RE REFRIGERATION MECHANIC CONTENTS: 1

2 CONTENTS: p 3... REFRIGERATION Class RE - Scope and Prerequisites p 4... Required Reference Material for Exams p 5..Instructions for Exam Candidates p 6... Errata to Canadian Electrical Code (Aug 2010) p 9... BCSA Offices Directory p 11.. EXAM APPLICATION FORM 2

3 Electrical Class: RE FSR Refrigeration Mechanic Class Type: Class Code: Description: Scope: EL FSR RE Field Safety Representative, Class RE, Refrigeration Mechanic Within the scope of this certificate an individual may: Act as Field Safety Representative and Perform regulated electrical work on electrical equipment within the scope of the following certificates: ITA Refrigeration Mechanic Trade Certificate of Qualification, issued under the BC Industry Training Authority Act: Refrigeration Mechanic means a person who fabricates, installs, alters, repairs/services any system used for cooling and/or heating (i.e., heat pumps) in closed systems that contain a refrigeration or a brine and thermoelectric cooling. Includes piping, controls and electrical work usually performed by a journeyperson. Field Safety Representative, Certificate of Qualification Class RE, Refrigeration Mechanic as follows: All wiring is restricted to circuits for the following regulated products; electrical wiring for refrigeration equipment, air-conditioning units, heat pumps and chillers. In order to provide a supply of power to the noted electrical equipment, this scope includes branch circuit wiring from existing enclosures containing overcurrent devices. Wiring is restricted to a maximum of 750 volts. Electrical work on Fire Alarm Systems or in Hazardous Locations is excluded. Prerequisites: Provide acceptable proof of relevant training and work experience (originals are to be presented to staff who will make, date and sign verified true copies) of the following: B.C. Certificate of Qualification in the Trade of Refrigeration Mechanic, or B.C. Exemption Permit in the Trade of Refrigeration Mechanic (REX), or Canadian Interprovincial Standards Qualification IPSE Certificate in the trade of Refrigeration Mechanic (Refrigeration and Air Conditioning Mechanic), or Canadian Interprovincial Standards Qualification IPSE Certificate in the trade of Electrical. Pay the required fee and Pass the Class RE certificate 2 hour examination Area of study: Applicable items from the Reference Material List and the following sections of the B.C. Electrical Code Regulation 0, 2, 4, 8, 10, 12, 14, 16, 18, (ammonia), 26, 28, 62. 3

4 BC SAFETY AUTHORITY ELECTRICAL SAFETY PROGRAM ELECTRICAL EXAMINATION REFERENCE MATERIAL ELECTRICAL FIELD SAFETY REPRESENTATIVE (FSR), CERTIFICATE OF QUALIFICATION (C of Q) ALL CLASSES Electrical examinations will be based on the latest Act and pursuant regulations. As part of the regulatory changes, inclusion of applicable safety standards is being emphasized. Examinees should have knowledge of the reference material and applicable standards required within the scope of the certificate applied for. Information about any class of examination should be directed to your local BC Safety Authority office. Examinations are open book; examinee must provide their own reference materials for writing the examination. The Canadian Electrical Code Handbook and Pocket Reference are not allowed. Pages with markings in reference material such as formula and examples or calculations are to be removed before exam date. Cross referencing notes are acceptable. Material will be checked before & after exam. No other reference materials except as noted in the reference material list for the specific examination may be used. ELECTRICAL REFERENCE MATERIAL LIST: For examinations in all electrical classes, you will be required to provide the current edition of the following: 1. Safety Standards Act [S.B.C., 2003, Ch. 39] 2. Safety Standards General Regulation, B.C. Reg. 105/ Electrical Safety Regulation, B.C. Reg. 100/ B.C. Electrical Code Regulation 4. a. The 2009 Canadian Electrical Code, Part I, 21 st Edition C , 4. b. Latest Errata to CSA Standard C22.1-0X-CEC [see attachment.]) 4. c. Deemed amendments for the purposes of adopting Canadian Electrical Code. (See Electrical Safety Regulation, Section 20 and the Schedule.) 5. BC Safety Authority, Fee Schedule 6. BC Safety Authority, Electrical Information Bulletins 7. BC Safety Authority, Electrical Directives Notes: Legislative documents (Acts and Regulations) are available on the BC Safety Authority web site: Electrical Fee Schedule, Bulletins, and Directives are available on the BC Safety Authority web site at They are not available from Crown Publications. Legislative documents (Acts & Regulations) and the Canadian Electrical Code are available from: Crown Publications Inc., (250) , 106 Ontario Street, Victoria, BC V8V 1M9 Website: Copies of the Canadian Electrical Code are available from Canadian Standards Association, and various electrical wholesalers. 4

5 INSTRUCTIONS FOR EXAM CANDIDATES Please review prior to writing exam. 1. You must provide photo identification to the exam invigilator. 2. The time limit for this examination varies depending on exam written. Be sure you are attempting the correct examination paper. 3. Only authorized reference material are permitted in the exam room: Safety Standards Act, General and Electrical Safety Regulations; BC Electrical Code Regulation, (Canadian Electrical Code, BC Amendments and CSA Errata), BCSA Bulletins, BCSA Directives and BCSA Fee Schedule, and other listed Standards. The Canadian Electrical Code Handbook ( an explanation of the rules ) and the Canadian Electrical Code Pocket Reference are NOT allowed. Pages with markings in reference material such as formula and examples or calculations are to be removed. Cross reference notes are acceptable. No other reference materials except as noted in the reference material list for the specific examination may be used. 4. Only non-programmable calculators are permitted in the exam room. Calculators incorporating tapes or any form of pre-programmable recording devices are not allowed. 5. Items that will not be permitted into the examination room: Notes Scrap papers, briefcases or similar items, backpacks, cellular telephones, lap tops, note pads, palm held personal digital assistants or programmable recording devices or similar items are not allowed in the exam room. 6. Do not communicate with other examinees. All questions must be directed to the invigilator. 7. All answers must be marked in pen with an X on the answer sheet provided. 8. Incorrect answers will not receive a penalty. A minimum mark of 70% is required to pass 9. Calculated answers to questions have been rounded off. 10. At the end of the examination, You must wait to be signed out. The complete examination, answer sheet and all working papers (whether used or not) must be returned to the invigilator before leaving. Count the numbered sheets issued and ensure that all sheets are returned. The invigilator will check reference material to ensure notes from the examination have not been added. Material so marked will be photocopied, attached to the returning exam package and may invalidate the examination. 11. Contravention of any instruction or rule may result in failure/disqualification. 12. Results of the examination will be mailed to you in three to four weeks. No results will be given by telephone and the examiner will not review graded examinations with the examinee. 13. Invigilator and examinee to complete information requested on answer sheet and all working calculation sheets. 5

6 FOR USE WITH 2009 CODE ONLY 6

7 7

8 8

9 BCSA EXAMINATION OFFICES Rev Oct 2010 OFFICE ADDRESS TELEPHONE # Abbotsford, Unit Marshall Road V2S1L NO Cranbrook, Unit Cranbrook St N V1C 3P Yes ELECT. EXAM Coquitlam (for applications only) 2773 Barnet Highway Unit 24 V3B 1C NO Dawson Creek, Ft. St John rd Ave Suite 101 contact Prince George V1G 4J2 PG th St V1J 4L6 contact Prince George PG Kamloops, 1278 A Dalhousie Drive V2C 6G Yes Kelowna, 1913 Kent Rd V1Y 7S / 7370 Yes Langley, Unit th Avenue V3A 4G Nanaimo, Princess Royal Ave V9S 5R / 5200 Nelson, 310 Ward St. contact Bonnie in Kelowna Kelowna Yes AM & PM Yes, AM & PM New Westminster, Head Office 505 Sixth Street, Suite 200 V3L 0E Yes Penticton, 1101 Main Street, Suite 2 V2A 5E Yes Powell River, 6953 Alberni Street contact Shelley in Nanaimo V8A 2B Nanaimo Prince George, 3235 Westwood Drive V2N 1S Yes Salmon Arm, Smithers, Terrace, 850A 16th Street NE Mail: PO Box 100 V1E 4S Bag 5000, 1020 Murray St. contact Prince George V0J 2N0 PG Eby St contact Prince George V8G 5K8 PG Yes, AM only Vernon, th St V1T 9G Yes Victoria, (Saanich) Vernon Avenue in Gateway Village. Victoria V8X 5A TOLL FREE TO ANY OFFICE: Yes, AM & PM 9

10 10

11 11

CLASS A ELEVATING DEVICES MECHANIC APPLICATION FOR CERTIFICATION: GRANTED/CERTIFIED DIFFERENT JURISDICTION PATH

CLASS A ELEVATING DEVICES MECHANIC APPLICATION FOR CERTIFICATION: GRANTED/CERTIFIED DIFFERENT JURISDICTION PATH www.technicalsafetybc.ca contact@technicalsafetybc.ca Toll Free: 1-866-566-7233 CLASS A ELEVATING DEVICES MECHANIC Payment Card Industry Data Security Standards prevent the use of credit card information

More information

2015 NRP Registration Exam Application

2015 NRP Registration Exam Application 2015 NRP Registration Exam Application Contents Information for Applicants 3 Applicant Checklist 4 NRP Registration Exam Application 5 Registration Exam Fee 6 Registration Department Association of BC

More information

2015 RPF Registration Exam Application

2015 RPF Registration Exam Application 2015 RPF Registration Exam Application Contents Information for Applicants 3 Applicant Checklist 4 RPF Registration Exam Application 5 Registration Exam Fee 6 Work History 7 Registration Department Association

More information

HEATING TECHNICIAN INDUSTRY TRAINING PROGRAM PROFILE RECOGNIZED PROGRAM. Occupation Description. Pathways to Certification. Recommended Education

HEATING TECHNICIAN INDUSTRY TRAINING PROGRAM PROFILE RECOGNIZED PROGRAM. Occupation Description. Pathways to Certification. Recommended Education HEATING TECHNICIAN Occupation Description means a person who performs construction related tasks in the residential market dealing with the design, installation and servicing of heating, ventilation and

More information

PDP Course List October March 2019 Last Updated: October 9, 2018 As new course dates are confirmed for 2019 the calendar will be updated.

PDP Course List October March 2019 Last Updated: October 9, 2018 As new course dates are confirmed for 2019 the calendar will be updated. PDP Course List October 2018 - March 2019 Last Updated: October 9, 2018 As new course dates are confirmed for 2019 the calendar will be updated. Date Location Course Title PDP/REP Member Board 3-Oct-18

More information

FUJAA GENERAL EXAMINATION REQUIREMENTS & PROCEDURE

FUJAA GENERAL EXAMINATION REQUIREMENTS & PROCEDURE FUJAA GENERAL EXAMINATION REQUIREMENTS & PROCEDURE Please read and understand the following requirements of Part/CAR 66 Examination before completing the application / registration form. Part/CAR Examinations

More information

Petroleum Mechanic Certification Program Policies and Procedures

Petroleum Mechanic Certification Program Policies and Procedures Certification Program Effective: Document Uncontrolled if Printed Table of Contents 1. Background... 3 2. Certificate Requirements... 3 3. Training Standards... 4 4. Certification Rights, Privileges and

More information

BCS Professional Certification BCS Professional Certification Subject Access Request Policy Qualifications Subject Access Request Policy July 2016

BCS Professional Certification BCS Professional Certification Subject Access Request Policy Qualifications Subject Access Request Policy July 2016 BCS Professional Certification BCS Professional Certification Subject Access Request Policy Qualifications Subject Access Request Policy July 2016 May 2017 Copyright BCS 2017 Page 1 of 5 Pol 023 V1.7 (Approved)

More information

INDUSTRY TRAINING PROGRAM PROFILE ACCREDITED PROGRAM WELDER

INDUSTRY TRAINING PROGRAM PROFILE ACCREDITED PROGRAM WELDER WELDER Occupation Description Welder means a person who has training in and is capable of welding ferrous and non-ferrous metals in all positions, on both plate and/or pipe, using various welding processes.

More information

Grade 12 or equivalent including English 12, Algebra 11 or Trade Mathematics 11, and Physics 11 or Science & Technology 11

Grade 12 or equivalent including English 12, Algebra 11 or Trade Mathematics 11, and Physics 11 or Science & Technology 11 PLUMBER Occupation Description means a person who installs, alters or repairs any plumbing system including all work usually done by a journeyperson plumber governed by the BC Plumbing Code. For detailed

More information

Re: FortisBC Inc. Customer Complaint Melody Farmer Boswell Power Surge and Incident Report

Re: FortisBC Inc. Customer Complaint Melody Farmer Boswell Power Surge and Incident Report LETTER NO. L 59 10 ERICA M. HAMILTON COMMISSION SECRETARY Commission.Secretary@bcuc.com web site: http://www.bcuc.com SIXTH FLOOR, 900 HOWE STREET, BOX 250 VANCOUVER, BC CANADA V6Z 2N3 TELEPHONE: (604)

More information

CPA Canada Path to Post Designation Licensing for Legacy Members applicable in BC until September 1, 2018

CPA Canada Path to Post Designation Licensing for Legacy Members applicable in BC until September 1, 2018 Questions? Contact: PDPA@cpawsb.ca CPA Canada Path to Post Designation Licensing for Legacy Members applicable in BC until September 1, 2018 PLEASE NOTE: There are both education and practical experience

More information

SECURITY SYSTEMS TECHNICIAN

SECURITY SYSTEMS TECHNICIAN SECURITY SYSTEMS TECHNICIAN Occupation Description System means a person who designs, installs, repairs, maintains, replaces, tests, services the operation of all electronic security systems in accordance

More information

Policies and Procedures. 636G Apprenticeship. Gas Technician Certification

Policies and Procedures. 636G Apprenticeship. Gas Technician Certification Policies and Procedures (under Ontario Regulation 215/01, Technical Standards and Safety Act, 2000) Technical Standards and Safety Authority (TSSA) Fuels Safety Training and Certification www.tssa.org

More information

OFFICIAL PROGRAM STANDARDS NOTIFICATION (OPSN)

OFFICIAL PROGRAM STANDARDS NOTIFICATION (OPSN) OFFICIAL PROGRAM STANDARDS NOTIFICATION (OPSN) Issued: November 13, 2013 Program: To: ITA Training Providers BC Construction Industry Training Organization (CITO) ACE-IT School Districts RE: OPSN 2013

More information

INSULATOR (HEAT & FROST) (HEAT & FROST INSULATOR)

INSULATOR (HEAT & FROST) (HEAT & FROST INSULATOR) INSULATOR (HEAT & FROST) (HEAT & FROST INSULATOR) Occupation Description Heat and Frost Insulator means a person who covers exposed surfaces of pipes, steam generators, ducts, process vats and related

More information

SPRINKLER SYSTEM INSTALLER

SPRINKLER SYSTEM INSTALLER SPRINKLER SYSTEM INSTALLER Occupation Description means a person who installs, alters or repairs automatic, deluge or pre-action sprinklers; foam, fog, and carbon dioxide systems; wet or dry standpipes;

More information

CONSTRUCTION ELECTRICIAN

CONSTRUCTION ELECTRICIAN CONSTRUCTION ELECTRICIAN Occupation Description Construction means a person who installs, constructs, alters, repairs, maintains, commissions, tests, services, calibrates and operates related electrical

More information

INDUSTRY TRAINING PROGRAM PROFILE ACCREDITED PROGRAM WELDER

INDUSTRY TRAINING PROGRAM PROFILE ACCREDITED PROGRAM WELDER WELDER Occupation Description Welder means a person who has training in and is capable of welding ferrous and non-ferrous metals in all positions, on both plate and/or pipe, using various welding processes.

More information

DRYWALL FINISHER INDUSTRY TRAINING PROGRAM PROFILE RECOGNIZED PROGRAM. Occupation Description. Pathways to Certification. Recommended Education

DRYWALL FINISHER INDUSTRY TRAINING PROGRAM PROFILE RECOGNIZED PROGRAM. Occupation Description. Pathways to Certification. Recommended Education DRYWALL FINISHER Occupation Description means a person who prepares, tapes, fills and sands all seams, corners and angles. Prepares for and applies all decorative fixtures. For detailed information on

More information

ARCHITECTURAL SHEET METAL WORKER

ARCHITECTURAL SHEET METAL WORKER ARCHITECTURAL SHEET METAL WORKER Occupation Description means a person who has the product knowledge and skills to prepare, repair and fabricate components for; metal roofs, metal walls and other exterior

More information

APPLICATION FOR CERTIFICATE OF QUALIFICATION

APPLICATION FOR CERTIFICATE OF QUALIFICATION APPLICATION FOR CERTIFICATE OF QUALIFICATION City of Kansas City, Missouri Application fee: $55.00 City Planning & Development Department Exam fee: To be paid directly to testing agency* Development Services

More information

ASPHALT PAVING/LAYDOWN TECHNICIAN

ASPHALT PAVING/LAYDOWN TECHNICIAN ASPHALT PAVING/LAYDOWN TECHNICIAN Occupation Description Asphalt Paving/Laydown Technicians operate machines that lay, screed, compact or mill surface materials in highway and road construction. They may

More information

APMP. The APM Project Management Qualification. Guide for Candidates

APMP. The APM Project Management Qualification. Guide for Candidates APMP The APM Project Management Qualification Guide for Candidates Contents Introduction 3 Applying for the examination 3 Examination advice 4 Examination materials 4 Examination process 5 3 hour examination

More information

BITUMINOUS MINE OFFICIALS CERTIFICATION APPLICATION GUIDELINES AND EXAMINATION INFORMATION Revised 12/13/16

BITUMINOUS MINE OFFICIALS CERTIFICATION APPLICATION GUIDELINES AND EXAMINATION INFORMATION Revised 12/13/16 BITUMINOUS MINE OFFICIALS CERTIFICATION APPLICATION GUIDELINES AND EXAMINATION INFORMATION Revised 12/13/16 PART 1: APPLICATION GUIDELINES: PLEASE TAKE TIME TO READ THESE GUIDELINES BEFORE COMPLETING APPLICATION.

More information

INSTRUCTIONS. What are the steps to apply? What is this? Who can apply? How does it work? What does the test cover?

INSTRUCTIONS. What are the steps to apply? What is this? Who can apply? How does it work? What does the test cover? INSTRUCTIONS What is this? This program has been established to enable experienced fire sprinkler fitters/installers a means to demonstrate their knowledge in the field of fire sprinkler installation.

More information

National Certificate in Maintenance and Diagnostics in Mechanical Engineering (Level 5)

National Certificate in Maintenance and Diagnostics in Mechanical Engineering (Level 5) NQF Ref 0718 Version 2 Page 1 of 10 National Certificate in Maintenance and Diagnostics in Mechanical Engineering (Level 5) Level 5 Credits 110 This qualification is expiring. The last date to meet the

More information

Project Risk Management Single Subject Certificate Level 2. Guide for candidates

Project Risk Management Single Subject Certificate Level 2. Guide for candidates Project Risk Management Single Subject Certificate Level 2 Guide for candidates Introduction. 3 Applying for an exam. 4 Completing your application form.. 4 Taking the exam 5 Exam rules 5 Exam materials...

More information

BC OnLine. Gas Permit System User s Guide

BC OnLine. Gas Permit System User s Guide BC OnLine Gas Permit System User s Guide Last Updated January 17, 2008 Copyright Copyright 2008 MDA Access BC Ltd. and the British Columbia Safety Authority. MDA Access BC Ltd. (Access BC) grants consent

More information

PARTSPERSON 2 INDUSTRY TRAINING PROGRAM PROFILE RECOGNIZED PROGRAM. Occupation Description. Pathways to Certification. Recommended Education

PARTSPERSON 2 INDUSTRY TRAINING PROGRAM PROFILE RECOGNIZED PROGRAM. Occupation Description. Pathways to Certification. Recommended Education PARTSPERSON Occupation Description " " refers to an individual who orders, warehouses, merchandises, controls inventory and dispenses repair and replacement parts for the automotive, commercial transport,

More information

PARTS AND WAREHOUSING PERSON 1

PARTS AND WAREHOUSING PERSON 1 PARTS AND WAREHOUSING PERSON 1 Occupation Description " " refers to an individual who performs basic warehousing functions which include basic materials handling of all warehouse items, including automotive

More information

Technical Standards and Safety Authority. Policies and Procedures: Record of Training Policy Document

Technical Standards and Safety Authority. Policies and Procedures: Record of Training Policy Document Technical Standards and Safety Authority : Record of Training Policy Document This document is uncontrolled if printed Contents... 1 of Training Providers/Organizations for Record of Training (ROT)...

More information

OFFICIAL PROGRAM STANDARDS NOTIFICATION (OPSN)

OFFICIAL PROGRAM STANDARDS NOTIFICATION (OPSN) OFFICIAL PROGRAM STANDARDS NOTIFICATION (OPSN) Issued: September 30, 2013 Program: To: DRYWALL FINISHER Finishing Trades Institute of BC BC Wall & Ceiling BC Construction Industry Training Organization

More information

FLOOR COVERING INSTALLER

FLOOR COVERING INSTALLER FLOOR COVERING INSTALLER Occupation Description Floor Covering Installer means a person who installs, applies, replaces, repairs, services and prepares rugs, carpets, organic and synthetic materials, linoleum,

More information

TRUCK AND TRANSPORT MECHANIC (COMMERCIAL TRANSPORT VEHICLE MECHANIC) INDUSTRY TRAINING PROGRAM PROFILE ACCREDITED PROGRAM. Occupation Description

TRUCK AND TRANSPORT MECHANIC (COMMERCIAL TRANSPORT VEHICLE MECHANIC) INDUSTRY TRAINING PROGRAM PROFILE ACCREDITED PROGRAM. Occupation Description TRUCK AND TRANSPORT MECHANIC Occupation Description means a person who maintains, rebuilds, overhauls, reconditions, and does diagnostic troubleshooting of motorized commercial truck, bus, and road transport

More information

WELDER LEVEL B INDUSTRY TRAINING PROGRAM PROFILE ACCREDITED PROGRAM. Occupation Description. Pathways to Certification. Recommended Education

WELDER LEVEL B INDUSTRY TRAINING PROGRAM PROFILE ACCREDITED PROGRAM. Occupation Description. Pathways to Certification. Recommended Education WELDER LEVEL B Occupation Description means a person who has training in and is capable of welding ferrous and non-ferrous metals in all positions, on both plates and /or pipe, using SMAW, GTAW, and FCAW

More information

GENERAL CONDITIONS FOR POWER ENGINEERING EXAMINATIONS AND REFRIGERATION OPERATORS A AND B AND COMPRESSOR OPERATORS

GENERAL CONDITIONS FOR POWER ENGINEERING EXAMINATIONS AND REFRIGERATION OPERATORS A AND B AND COMPRESSOR OPERATORS GENERAL CONDITIONS F POWER ENGINEERING EXAMINATIONS AND REFRIGERATION OPERATS A AND B AND COMPRESS OPERATS TABLE OF CONTENTS PAGE 1. Definitions..3 2. Classification..3 3. Applications for Examinations.3

More information

This will allow candidates for whom travelling to a Prometric Test Center is not convenient or possible an opportunity to pursue EDGE certification.

This will allow candidates for whom travelling to a Prometric Test Center is not convenient or possible an opportunity to pursue EDGE certification. On-line Proctoring Bulletin EDGE Examination E X C E L L E N C E I N D E S I G N F O R G R E A T E R E F F I C I E N C I E S IFC (International Finance Corporation), a member of the World Bank Group, and

More information

City of New York Department of Buildings

City of New York Department of Buildings City of New York Department of Buildings Pre-Examination Requirements.. 2 Submitting Your Exam Application. 2 Exam Fees. 2 Scheduling Your Exam. 3 Special Considerations 4 Taking your Exam 4 Testing Regulations..

More information

Instructions to Examination Invigilators

Instructions to Examination Invigilators Instructions to Examination Invigilators APMP APMP for registered PRINCE2 Practitioners Introductory Certificate Risk Level 1 Risk Level 2 Invigilator Guidance Notes v1.3 Page 1 of 9 Introduction.....

More information

This candidate bulletin is your guide to the process of obtaining an EDGE Auditor license.

This candidate bulletin is your guide to the process of obtaining an EDGE Auditor license. Candidate Information Bulletin EDGE E X C E L L E N C E I N D E S I G N F O R G R E A T E R E F F I C I E N C I E S IFC (International Finance Corporation), a member of the World Bank Group that focuses

More information

INSULATOR (HEAT AND FROST)

INSULATOR (HEAT AND FROST) INSULATOR (HEAT AND FROST) INDUSTRY TRAINING PROGRAM PROFILE Occupation Description s (Heat and Frost) work with different kinds of insulating material to prevent or reduce the passage of heat, cold, vapour,

More information

Exhibit # 7 Rev (MG Exam Request_App Process).doc

Exhibit # 7 Rev (MG Exam Request_App Process).doc 1 Submitting a Medical Gas Installer Exam Request Form Important: Examination Request form and applications must be submitted together. Prior to submitting the exam request form, verify that all applicants

More information

IRONWORKER (GENERALIST)

IRONWORKER (GENERALIST) IRONWORKER (GENERALIST) Occupation Description means a person who rigs, welds, burns, rivets, bolts, drills, fits and fabricates or otherwise handles structural shapes and plates in the erection, demolition,

More information

2014 Proctor's Guide for the Certified Public Finance Officer Examinations

2014 Proctor's Guide for the Certified Public Finance Officer Examinations What's Your Next Move? Get ready for a move up by earning designation as a Certified Public Finance Officer! 2014 Proctor's Guide for the Certified Public Finance Officer Examinations Government Finance

More information

INDUSTRIAL ELECTRICIAN

INDUSTRIAL ELECTRICIAN INDUSTRIAL ELECTRICIAN Occupation Description "Industrial Electrician" means a person who inspects, installs, tests, troubleshoots, repairs, and services industrial electrical equipment and associated

More information

Guide for candidates

Guide for candidates Guide for candidates 2 APMP Guide for candidates Introduction 3 Applying for an examination 3 Completing your application form 3 Taking the examination 4 Examination rules 4 Examination materials 4 Examination

More information

ASOPE PROCTOR TRAINING AND GUIDELINES

ASOPE PROCTOR TRAINING AND GUIDELINES ASOPE ASOPE PROCTOR TRAINING AND GUIDELINES Produced By ASOPE Overview The American Society of Power Engineers, Inc. (ASOPE) testing modules are executed in testing locations by Proctors who are assigned

More information

Technical Standards and Safety Authority. Policies and Procedures: Record of Training Policy Document

Technical Standards and Safety Authority. Policies and Procedures: Record of Training Policy Document Technical Standards and Safety Authority Policies and Procedures: Record of Training Policy Document Table of Contents Policies and Procedures Introduction...1 Background and Intent...1...1 Instructor

More information

Instructions for Processing Information Filed Pursuant to the Sewerage System Regulation

Instructions for Processing Information Filed Pursuant to the Sewerage System Regulation Instructions for Processing Information Filed Pursuant to the Sewerage System Regulation Authorized Persons are required to file information prior to the construction, alteration or repair of a sewerage

More information

BCS Professional Certification

BCS Professional Certification BCS Professional Certification Releasing Personal Data to Third Parties September 2017 Copyright BCS 2017 Page 1 of 5 CONTENTS 1. Definition of a Third Party... 3 2. Purpose and Scope... 3 3. Policy...

More information

CASTI. CASTI Career Path. rev

CASTI. CASTI Career Path. rev CASTI Code and Standards Training Institute CASTI Career Path rev. 130531 Contents CAST CAREER PATH DIAGRAM CASTI CAREER PATH DESCRIPTION GETTING STARTED: ALBERTA WELDING EXAMINER 1 GETTING STARTED: CSA

More information

NZQF NQ Ref 1545 Version 2 Page 1 of 13

NZQF NQ Ref 1545 Version 2 Page 1 of 13 NZQF NQ Ref 1545 Version 2 Page 1 of 13 National Certificate in (Level 5) with strands in Engineering Fabrication, Fire Protection, General and Maintenance Engineering, Mechanical Services, and Precision

More information

BECOMING A MASTER ELECTRICIAN

BECOMING A MASTER ELECTRICIAN BECOMING A MASTER ELECTRICIAN March 2017 Revision history September 2015 September 2016 March 2017 Original Addition of Administrative Categories, Addition of website address in Introduction Addition of

More information

CONSTRUCTION ELECTRICIAN

CONSTRUCTION ELECTRICIAN CONSTRUCTION ELECTRICIAN Occupation Description Construction s plan, design, assemble, install, alter, repair, inspect, verify, commission, connect, operate, maintain and decommission electrical systems.

More information

Candidate Information Bulletin

Candidate Information Bulletin Candidate Information Bulletin Entry Level Battery P H A S E O N E - E X A M I N A T I O N A message from the United States Postal Service The United States Postal Service (USPS) is the contractor to the

More information

CONSTRUCTION CRAFT WORKER (LABOURER)

CONSTRUCTION CRAFT WORKER (LABOURER) CONSTRUCTION CRAFT WORKER (LABOURER) Occupation Description A works mostly on construction sites in residential, institutional, commercial, and industrial settings, including pipelines, utilities, hydroelectric

More information

In Company Abrasive Wheels Instructor / Examiner Training & Certification

In Company Abrasive Wheels Instructor / Examiner Training & Certification Health & Safety Certification & Services Ltd Central Administration Office - 100 Princes Street, Kettering, Northamptonshire, NN16 8RR Tel: 01536 414966 Fax: 01536 416933 email: info@hscsltd.co.uk WEB

More information

Cal/OSHA, DOT HAZMAT, EEOC, EPA, HIPAA, IATA, IMDG, TDG, MSHA, OSHA, Australia WHS, and Canada OHS Regulations and Safety Online Training

Cal/OSHA, DOT HAZMAT, EEOC, EPA, HIPAA, IATA, IMDG, TDG, MSHA, OSHA, Australia WHS, and Canada OHS Regulations and Safety Online Training !! Cal/OSHA, DOT HAZMAT, EEOC, EPA, HIPAA, IATA, IMDG, TDG, MSHA, OSHA, Australia WHS, and Canada OHS Regulations and Safety Online Training This document is provided as a training aid and may not reflect

More information

MOTORCYCLE MECHANIC (MOTORCYCLE & POWER EQUIPMENT TECHNICIAN)

MOTORCYCLE MECHANIC (MOTORCYCLE & POWER EQUIPMENT TECHNICIAN) MOTORCYCLE MECHANIC (MOTORCYCLE & POWER EQUIPMENT TECHNICIAN) Occupation Description "Motorcycle & Power Equipment Technician means a person who diagnoses, repairs, adjusts and replaces engines, drive

More information

Construction Electrician Apprenticeship Year 3 ELEC 3 Trades Training. Program Outline

Construction Electrician Apprenticeship Year 3 ELEC 3 Trades Training. Program Outline Construction Electrician Apprenticeship Year 3 ELEC 3 Trades Training Program Outline PROGRAM IMPLEMENTATION DATE: March 2005 OUTLINE EFFECTIVE DATE: March 2017 PROGRAM OUTLINE REVIEW DATE: September 2022

More information

RECORD OF DECISIONS RECREATION VEHICLE SERVICE TECHNICIAN PROVINCIAL TRADE ADVISORY COMMITTEE. Competitiveness, Training & Trade

RECORD OF DECISIONS RECREATION VEHICLE SERVICE TECHNICIAN PROVINCIAL TRADE ADVISORY COMMITTEE. Competitiveness, Training & Trade RECORD OF DECISIONS Competitiveness, Training & Trade www.gov.mb.ca/tradecareers RECREATION VEHICLE SERVICE TECHNICIAN PROVINCIAL TRADE ADVISORY COMMITTEE HELD ON DAY & DATE: Tuesday, April 3, 2007 TIME:

More information

Level 2 Certification

Level 2 Certification Level 2 Certification Introduction The British Society for Strain Measurement holds personnel certification examinations leading to the award of the Strain Measurement Certificate at Level 1 and 2 and

More information

AUTOMOTIVE SERVICE TECHNICIAN (AST 1, 2, 3 & 4)

AUTOMOTIVE SERVICE TECHNICIAN (AST 1, 2, 3 & 4) AUTOMOTIVE SERVICE TECHNICIAN (AST 1, 2, 3 & 4) Occupation Description (AST) is a person who repairs, adjusts and replaces mechanical, electrical and electronic parts of automobiles and light trucks in

More information

APMP The APM Project Management Qualification. Guide for Candidates DRAFT

APMP The APM Project Management Qualification. Guide for Candidates DRAFT APMP The APM Project Management Qualification Guide for Candidates Contents Introduction 3 Applying for the examination 3 Examination advice 4 Examination materials 4 Examination procedure 5 3 hour examination

More information

ANSI/AHRI Standard (Formerly ARI Standard ) 2002 Standard for Air-Conditioning and Refrigerating Equipment Nameplate Voltages

ANSI/AHRI Standard (Formerly ARI Standard ) 2002 Standard for Air-Conditioning and Refrigerating Equipment Nameplate Voltages ANSI/AHRI Standard 110-2002 (Formerly ARI Standard 110-2002) 2002 Standard for Air-Conditioning and Refrigerating Equipment Nameplate Voltages IMPORTANT SAFETY RECOMMENDATIONS It is strongly recommended

More information

Level 2 Certificate in Principles of Marketing ( )

Level 2 Certificate in Principles of Marketing ( ) Level Certificate in Principles of Marketing (774-0) www.cityandguilds.com July 0 Version.0 Short Answer Questions Version: Sample Instructions for use As the exam secretary you will be required to print

More information

UF-IFAS Jackson County Extension Office Marianna, FL 32448

UF-IFAS Jackson County Extension Office Marianna, FL 32448 Institute of Food and Agricultural Sciences 2741 Pennsylvania Ave. UF-IFAS Jackson County Extension Office Marianna, FL 32448 Information for the next Certified Pile Burners Course: The Florida Forest

More information

BCS Group Operations E-reader Policy January 2018

BCS Group Operations E-reader Policy January 2018 BCS Group Operations E-reader Policy January 2018 Copyright BCS 2018 Page 1 of 5 CONTENTS 1. Policy... 3 2. Definition Of An E-Reader... 3 3. Definition Of An Open Book Exam... 3 4. Full List Of Bcs Open

More information

INSTRUMENTATION AND CONTROL TECHNICIAN (INDUSTRIAL INSTRUMENT MECHANIC)

INSTRUMENTATION AND CONTROL TECHNICIAN (INDUSTRIAL INSTRUMENT MECHANIC) INSTRUMENTATION AND CONTROL TECHNICIAN (INDUSTRIAL INSTRUMENT MECHANIC) Occupation Description ation and Control Technician means a person who installs, repairs, maintains, replaces, calibrates, programs

More information

*Proximity is defined as a distance of three meters or less from a primary conductor with a voltage of 750 volts or greater.

*Proximity is defined as a distance of three meters or less from a primary conductor with a voltage of 750 volts or greater. UTILITY ARBORIST Occupation Description means a person who undertakes any work required to prune or clear vegetation in proximity* to energized electrical equipment, structures and conductors or who in

More information

TOOL AND DIE MAKER INDUSTRY TRAINING PROGRAM PROFILE ACCREDITED PROGRAM. Occupation Description. Pathways to Certification.

TOOL AND DIE MAKER INDUSTRY TRAINING PROGRAM PROFILE ACCREDITED PROGRAM. Occupation Description. Pathways to Certification. TOOL AND DIE MAKER Occupation Description Tool and Die Maker means a person who makes, repairs and tests dies, cutting tools, jigs, fixtures, moulds, gauges and special hand tools by laying out, setting-up,

More information

GENERAL GASFITTER Licensing Examination Information

GENERAL GASFITTER Licensing Examination Information GENERAL GASFITTER Licensing Examination Information General Gasfitter is not a designated trade in Saskatchewan. The General Gasfitter examination is administered as a partnership with the Ministry of

More information

Counsel in Complaint and Discipline Process

Counsel in Complaint and Discipline Process Counsel in Complaint and Discipline Process The following lawyers have agreed to assist or represent lawyers who are subject to the investigation and disciplinary processes. Note: The Law Society does

More information

APMP. The APM Project Management Qualification. Guide for Candidates

APMP. The APM Project Management Qualification. Guide for Candidates APMP The APM Project Management Qualification Guide for Candidates Contents Introduction 3 Applying for the examination 3 Examination advice 4 Examination materials 4 Examination process 5 3 hour examination

More information

DIESEL ENGINE MECHANIC

DIESEL ENGINE MECHANIC DIESEL ENGINE MECHANIC Occupation Description Diesel Engine Mechanic means a person who installs, repairs, and maintains all internal combustion diesel engines and components used in transport, construction

More information

PETROLEUM EQUIPMENT INSTALLER

PETROLEUM EQUIPMENT INSTALLER PETROLEUM EQUIPMENT INSTALLER Occupation Description s work in the downstream petroleum sector of the oil and gas industry. They install and remove storage tanks and transfer, handle and dispense equipment

More information

Steamfitter/Pipefitter Apprenticeship Year 2 PFIT 2 Trades Training. Program Outline

Steamfitter/Pipefitter Apprenticeship Year 2 PFIT 2 Trades Training. Program Outline Steamfitter/Pipefitter Apprenticeship Year 2 PFIT 2 Trades Training Program Outline PROGRAM IMPLEMENTATION DATE: February 2015 OUTLINE EFFECTIVE DATE: February 2015 PROGRAM OUTLINE REVIEW DATE: February

More information

JOURNEYMAN ELECTRICIAN

JOURNEYMAN ELECTRICIAN 2014 NATIONAL ELECTRICAL JOURNEYMAN ELECTRICIAN EXAM QUESTIONS AND ANSWERS 10 Complete closed book exams with answers 24 Complete open book exams with answers Complete Final Journeyman Exam Over 1850 actual

More information

BOOM TRUCK OPERATOR FOLDING BOOM UNLIMITED TONNAGE

BOOM TRUCK OPERATOR FOLDING BOOM UNLIMITED TONNAGE BOOM TRUCK OPERATOR FOLDING BOOM UNLIMITED TONNAGE Occupation Description Folding Boom Unlimited Tonnage operator means a person who operates a truck mounted folding boom crane with capacity over 22 tonnes

More information

Regulations Respecting Examinations and Certificates of Engineers and Firemen

Regulations Respecting Examinations and Certificates of Engineers and Firemen EXAMINATION AND CERTIFICATES 1 Regulations Respecting Examinations and Certificates of Engineers and Firemen Repealed by Chapter B-5.1 Reg 1 (effective January 1, 2007) Formerly Saskatchewan Regulations

More information

Non-SOPEEC Practical Experience Assessment Certification and Examination Guide

Non-SOPEEC Practical Experience Assessment Certification and Examination Guide Effective: March 2018 Document Uncontrolled if Printed Table of Contents 1. Background... 3 2. Definitions... 3 3. General... 3 4. Assessment Documentation, Dates and Times... 5 5. Assessment Results...

More information

GLAZIER INDUSTRY TRAINING PROGRAM PROFILE ACCREDITED PROGRAM. Occupation Description. Pathways to Certification. Recommended Education

GLAZIER INDUSTRY TRAINING PROGRAM PROFILE ACCREDITED PROGRAM. Occupation Description. Pathways to Certification. Recommended Education GLAZIER Occupation Description means a person who does: (a) the measuring, handling, cutting, preparation, edging, installation, removal, repair, replacement and sealing of all types of glass, mirrors

More information

AUTOMOTIVE SERVICE TECHNICIAN

AUTOMOTIVE SERVICE TECHNICIAN AUTOMOTIVE SERVICE TECHNICIAN Occupation Description s possess the full range of knowledge and abilities required to perform preventative maintenance, diagnose problems and repair vehicle systems including

More information

BOILERMAKER (CONSTRUCTION BOILERMAKER)

BOILERMAKER (CONSTRUCTION BOILERMAKER) BOILERMAKER (CONSTRUCTION BOILERMAKER) Occupation Description Construction Boilermaker means a person who does the laying out, burning, shearing, sawing, cutting, punching, drilling, reaming, boring, rapping,

More information

COOK (PROFESSIONAL COOK 3)

COOK (PROFESSIONAL COOK 3) COOK (PROFESSIONAL COOK 3) Occupation Description Cook means a person who performs all phases of kitchen activities including the preparation and presentation of vegetables, soups, sauces, meat, fish and

More information

Vocational Training Programs

Vocational Training Programs CNC Machinist Course code: 51-4012 Program Title: CNC Machinist Credits: 49.5 600 Clock Hours 24 Weeks Prerequisites: Basic Mathematics Course Description: This course will introduce the student into blueprinting,

More information

CSA STANDARDS W47.1, W47.2 & W186 CERTIFICATION GUIDE FOR APPLICANT COMPANIES TO. Congratulations and Welcome to the Certification Application Process

CSA STANDARDS W47.1, W47.2 & W186 CERTIFICATION GUIDE FOR APPLICANT COMPANIES TO. Congratulations and Welcome to the Certification Application Process CERTIFICATION GUIDE FOR APPLICANT COMPANIES TO CSA STANDARDS W47.1, W47.2 & W186 Congratulations and Welcome to the Certification Application Process This guide will help you as an applicant company meet

More information

IECEx OPERATIONAL DOCUMENT

IECEx OPERATIONAL DOCUMENT IECEx OD 502 Edition 3.0 2016-09 IECEx OPERATIONAL DOCUMENT IEC System for Certification to Standards relating to Equipment for use in Explosive Atmospheres (IECEx System) IECEx Scheme for Certification

More information

WATER WELL DRILLER INDUSTRY TRAINING PROGRAM PROFILE RECOGNIZED PROGRAM. Occupation Description. Pathways to Certification. Recommended Education

WATER WELL DRILLER INDUSTRY TRAINING PROGRAM PROFILE RECOGNIZED PROGRAM. Occupation Description. Pathways to Certification. Recommended Education WATER WELL DRILLER Occupation Description Water Well refers to a person who sets up and operates mobile equipment used to drill residential commercial and industrial water wells. In addition, they conduct

More information

BCS Higher Education Qualifications. Diploma in IT. Object Oriented Programming Syllabus

BCS Higher Education Qualifications. Diploma in IT. Object Oriented Programming Syllabus BCS Higher Education Qualifications Diploma in IT Object Oriented Programming Syllabus Version 3.0 December 2016 This is a United Kingdom government regulated qualification which is administered and approved

More information

EHWLC Exams Terms & Conditions:

EHWLC Exams Terms & Conditions: EHWLC Exams Terms & Conditions: Registration: Candidates will not be enrolled and accepted for the exam under any circumstances without payment. Late entries: Where spaces are available, a late entry fee

More information

Requirements for Registration as Professional Engineer In Chemical Engineering

Requirements for Registration as Professional Engineer In Chemical Engineering Requirements for Registration as Professional Engineer In Chemical Engineering Er. Chin Jen Chyi Registrar PEB Professional Engineers Act Establish the PE Board to carry out the following functions: -

More information

2016: English, Chinese, Indonesian Bahasa, Spanish and Vietnamese. The steps below summarize the EDGE Expert certification process.

2016: English, Chinese, Indonesian Bahasa, Spanish and Vietnamese. The steps below summarize the EDGE Expert certification process. Candidate Information Bulletin EDGE Examination E X C E L L E N C E I N D E S I G N F O R G R E A T E R E F F I C I E N C I E S IFC (International Finance Corporation), a member of the World Bank Group

More information

Common Final Examination (CFE) Locations

Common Final Examination (CFE) Locations Common Final Examination (CFE) Locations FALL CFE: SEPTEMBER 13, 14, 15, 2017 This document lists the locations for the CFE scheduled on Sep 13, 14, 15, 2017, candidate numbers by location will be posted

More information

Information and Rules for Candidates taking IFE Examinations in October 2018

Information and Rules for Candidates taking IFE Examinations in October 2018 Information and Rules for Candidates taking IFE Examinations in October 2018 INTRODUCTION This document provides information and rules for candidates who have booked examinations in October 2018. Candidates

More information

Instructions for Exam Entry May 2012

Instructions for Exam Entry May 2012 Instructions for Exam Entry May 2012 It is important that you read these instructions carefully before you complete your exam entry online. You can enter online for the May 2012 exams from 1 February 2012.

More information

Candidate Information Bulletin State of Arkansas

Candidate Information Bulletin State of Arkansas Candidate Information Bulletin State of Arkansas C O N T R A C T O R B U S I N E S S A N D L A W E X A M I N A T I O N The Arkansas Contractors Licensing Board (Board) is responsible for the administration

More information

LANDSCAPE HORTICULTURIST

LANDSCAPE HORTICULTURIST LANDSCAPE HORTICULTURIST Occupation Description Landscape means a person who selects, handles and utilizes trees, shrubs and ornamental plants and turf grass for the design, development and maintenance

More information

BCS, The Chartered Institute for IT. Exam Cancellation and Rescheduling Policy. September 2017

BCS, The Chartered Institute for IT. Exam Cancellation and Rescheduling Policy. September 2017 BCS, The Chartered Institute for IT Exam Cancellation and Rescheduling Policy September 2017 CONTENTS 1. SCOPE... 2 2. EXAMINATION CANCELLATION POLICY... 2 3. RESCHEDULING EXAMINATIONS... 2 4. RESCHEDULING

More information