EKI-7700 Series / EKI-5000 Series Protocol Switch VLAN Configuration SOP Configure VLAN with WebGUI Configure VLAN with CLI
|
|
|
- Gervase Long
- 5 years ago
- Views:
Transcription
1 EKI-7700 Series / EKI-5000 Series Protocol Switch VLAN Configuration SOP Configure VLAN with WebGUI Configure VLAN with CLI Revision Date Revision Description Author Feb/2018 V1.0 Initial release ICG AE Eddie.Wei / Raimen Liu 1
2 Abstract This SOP explains how to configure VLAN on Advantech EKI-7700 series industrial ethernet manage switch and EKI-5000 series protocol switch by WebGUI and Command Line Interface(CLI). Related products: EKI-7428, EKI-7706, EKI-7708, EKI-7710, EKI-7712, EKI-7716, EKI-7720, EKI-5526-PN, EKI-5526-EI, EKI-5526-MB, EKI-5528-PN, EKI-5528-EI, EKI-5528-MB, EKI-5629C-PN, EKI-5629C-EI, EKI-5629C-MB. Requirement: Advantech manage switch, RJ45 ethernet cable, Console cable, PC How to select Advantech manage switch console cable:
3 Configure VLAN with WebGUI 3
4 Configure VLAN with WebGUI Topology: Create one VLAN with two switch SW SW Port 10 Port 10 VLAN Trunk Tag 2 Port 2 Port 2 Untag 2 VLAN 2 PVID 2 VLAN 2 PVID 2 Untag
5 Configure VLAN with WebGUI Setting: Step 1: Logging the switch with admin/admin as Username/Password by default.
6 Configure VLAN with WebGUI Setting (Both SW1 and SW2 use the same setting): Step 2: Under VLAN Management, add VLAN 2 and press Apply button. And now VLAN 2 has already created.
7 Configure VLAN with WebGUI Setting (Both SW1 and SW2 use the same setting): Step 3: Under PVID Setting, select the VLAN 2 member port 2 (GE2) and then input PVID = 2. Press Apply button. And accordingly, GE2 will have its PVID as 2.
8 Configure VLAN with WebGUI Setting (Both SW1 and SW2 use the same setting): Step 4: Under Port to VLAN, selects VLAN ID = 2, and then changes GE2 to Untagged and GE10 with Tagged. So now port 2 belongs to VLAN 2, and normally we ll call port 2 as access port, port 10 as VLAN trunk port with tagged 2 connects to SW2.
9 Configure VLAN with WebGUI Setting (Both SW1 and SW2 use the same setting): Step 5: Under Port-VLAN Mapping, we can see the overall VLAN setting result. For port 2 (GE2), the port is untagged and has its PVID = 2 (U for untagged, P for PVID). For port 10 (GE10), the port is VLAN trunk port with Tag = 2 (T is tagged and VLAN trunk).
10 Configure VLAN with WebGUI Result: After the setting on SW1 and SW2, the laptop on SW1 can communicate with laptop on SW2 now. Because SW1 port 2 and SW2 port 2 are all belonging to VLAN 2 member.
11 Configure VLAN with CLI NOTE : CLI setting only for EKI-7700 series industrial manage switch. There is no console interface on the EKI-5000 series protocol switch. CLI User Manual : (Page 14 Page 16) =1-19HAUMG&Doc_Source=Download 11
12 Configure VLAN with CLI Commands Topology: Create one VLAN with one switch In the following slides, we will show you how to configure the VLAN setting by CLI commands with corresponding WebGUI as reference step by step. Switch 1(EKI-7710G) Port 6 HOST 2 HOST 1 Port 1 VLAN 10 VID=10 ; PVID=10
13 Configure VLAN with CLI Commands For Switch 1 Step 1: Create a new VLAN (VLAN 10)
14 Configure VLAN with CLI Commands For Switch 1 Step 2: Assign PVID for port 1 & port 6 (PVID = 20)
15 Configure VLAN with CLI Commands For Switch 1 Step 3: Assign VLAN egress rule for port 1 & port 6
16 Configure VLAN with CLI Commands Topology: Create one VLAN across two switches In the following slides, we will show you how to configure the VLAN setting by CLI commands with corresponding WebGUI as reference step by step. Switch 1(EKI-7710E) Switch 2(EKI-7710G) Trunk Port 8 Port 7 Port 1 Port 2 HOST 1 VLAN 20 HOST 2 VID=20 ; PVID=20
17 Configure VLAN with CLI Commands For Switch 1 Step 1: Create a new VLAN (VLAN 20)
18 Configure VLAN with CLI Commands For Switch 1 Step 2: Assign PVID for port 1 & port 8 (PVID = 20)
19 Configure VLAN with CLI Commands For Switch 1 Step 3: Assign VLAN egress rule for port 1 & port 8
20 Configure VLAN with CLI Commands For Switch 2 Step 1: Create a new VLAN (VLAN 20)
21 Configure VLAN with CLI Commands For Switch 2 Step 2: Assign PVID for port 2 & port 7 (PVID = 20)
22 Configure VLAN with CLI Commands For Switch 2 Step 3: Assign VLAN egress rule for port 2 & port 7
23
EKI-633x & EKI-136x-BE USDG Setup Example. Revision Date Revision Description Author May/2018 V1.0 Initial release ICG AE Jacky.
EKI-633x & EKI-136x-BE USDG Setup Example Revision Date Revision Description Author May/2018 V1.0 Initial release ICG AE Jacky.Lin 1 Abstract Part1 :This SOP explains how to configure the EKI-633x & EKI-
H3C S12500 VLAN Configuration examples
H3C S12500 VLAN Configuration examples Copyright 2014 Hangzhou H3C Technologies Co., Ltd. All rights reserved. No part of this manual may be reproduced or transmitted in any form or by any means without
FMUX01A/Plus Port Based VLAN Application Note
FMUX01A/Plus Port Based VLAN Application Note The information within this document is intended for experienced service personnel with knowledge of TCP/IP networking, PC networking configuration, serial
NCT240 IP DSLAM with IAC4500 VLAN Tagging Implementation
NCT240 IP DSLAM with IAC4500 VLAN Tagging Implementation The NetComm NCT240 24 Port IP DSLAMs support 802.1Q VLAN Tagging. This white paper is written to help IP DSLAM system integrator to set up and configure
Chapter 4 Configuring Switching
Chapter 4 Configuring Switching Using the Switching Tab The navigation tabs on the top of the home page include a Switching tab that lets you manage your GS108T Gigabit Smart Switch using features under
EKI-6332 & EKI-136x- MB_setup example SOP. Revision Date Revision Description Author April/2018 V1.0 Initial release ICG AE Jacky.
EKI-6332 & EKI-136x- MB_setup example SOP Revision Date Revision Description Author April/2018 V1.0 Initial release ICG AE Jacky.Lin 1 Abstract This SOP explains how to configure the EKI-6332 & EKI-136x-MB
How to Configure Virtual COM Port in EKI-1500 series.
How to Configure Virtual COM Port in EKI-1500 series ICG.Support@advantech.com.tw Overview Check EKI-1500 serial PIN Assignment Make sure the pin assignment is correct Install EKI Utility to run VCOM driver
VLAN Configuration via CLI on 300/500 Series Managed Switches
Article ID: 4986 4986 - VLAN Configuration via CLI on 300/500 Series Managed Switches Objective VLANs allow you to logically segment a LAN into different broadcast domains. In scenarios where sensitive
Table of Contents 1 Port Mirroring Configuration 1-1
Table of Contents 1 Port Mirroring Configuration 1-1 Introduction to Port Mirroring 1-1 Classification of Port Mirroring 1-1 Implementing Port Mirroring 1-2 Other Functions Supported by Port Mirroring
Example: Configuring DHCP Snooping, DAI, and MAC Limiting on an EX Series Switch with Access to a DHCP Server Through a Second Switch
Example: Configuring DHCP Snooping, DAI, and MAC Limiting on an EX Series Switch with Access to a DHCP Server Through a Second Switch Requirements You can configure DHCP snooping, dynamic ARP inspection
Example: Configuring Layer 2 Protocol Tunneling on EX Series Switches
Example: Configuring Layer 2 Protocol Tunneling on EX Series Switches Requirements Layer 2 protocol tunneling (L2PT) allows you to send Layer 2 protocol data units (PDUs) across a service provider network
Configuring Access and Trunk Interfaces
Configuring Access and Trunk Interfaces Ethernet interfaces can be configured either as access ports or trunk ports. Trunks carry the traffic of multiple VLANs over a single link and allow you to extend
EKI-633x & EKI-136x_VCOM application setup example. Revision Date Revision Description Author April/2018 V1.0 Initial release ICG AE Jacky.
EKI-633x & EKI-136x_VCOM application setup example Revision Date Revision Description Author April/2018 V1.0 Initial release ICG AE Jacky.Lin 1 Abstract This SOP explains how to configure the EKI-633x
How to configure the IAC4500 Internet Access Controller for Billing by Volume Application with NCT480 IP DSLAM using port location mapping
How to configure the IAC4500 Internet Access Controller for Billing by Volume Application with NCT480 IP DSLAM using port location mapping Introduction The following paper provides instructions on how
Configuring Protocol VLAN
CHAPTERS 1. Overview 2. Protocol VLAN Configuration 3. 4. Appendix: Default Parameters Overview This guide applies to: T1500G-10PS v2 or above, T1500G-8T v2 or above, T1500G-10MPS v2 or above, T1500-28PCT
VLANs. LAN Switching and Wireless Chapter 3. Version Cisco Systems, Inc. All rights reserved. Cisco Public 1
VLANs LAN Switching and Wireless Chapter 3 Version 4.0 2006 Cisco Systems, Inc. All rights reserved. Cisco Public 1 Objectives Explain the role of VLANs in a converged network. Explain the role of trunking
Figure Untagged and 802.1Q-Tagged Ethernet frames
38. 802.1Q VLAN Virtual LANs (VLANs) are logical, independent workgroups within a network. These workgroups communicate as if they had a physical connection to the network. However, VLANs are not limited
Configuring Port-Based and Client-Based Access Control (802.1X)
9 Configuring Port-Based and Client-Based Access Control (802.1X) Contents Overview..................................................... 9-3 Why Use Port-Based or Client-Based Access Control?............
Table of Contents 1 VLAN Configuration 1-1
Table of Contents 1 VLAN Configuration 1-1 Overview 1-1 Introduction to VLAN 1-1 VLAN Fundamentals 1-2 Types of VLAN 1-3 Introduction to Port-Based VLAN 1-3 Configuring a VLAN 1-4 Configuration Task List
Example: Setting Up Basic Bridging and a VLAN for an EX Series Switch
Example: Setting Up Basic Bridging and a VLAN for an EX Series Switch Requirements EX Series switches use bridging and virtual LANs (VLANs) to connect network devices in a LAN desktop computers, IP telephones,
How to stack multiple NCT192 IP DSLAMs in untagged mode and VLAN tagged mode
How to stack multiple NCT192 IP DSLAMs in untagged mode and VLAN tagged mode Introduction The NetComm NCT192 192-port IP DSLAM supports service capacity expansion via unit stacking. A maximum of ten NCT192s
Lecture (03) VLANs. By: Dr. Ahmed ElShafee. Dr. Ahmed ElShafee, ACU : Fall 2015, Practical App. Networks II 4.0
Lecture (03) VLANs By: Dr. Ahmed ElShafee ١ Dr. Ahmed ElShafee, ACU : Fall 2015, Practical App. Networks II 4.0 ٢ Topology ٣ item Configuration item Configuration PC1 PC2 IP 10.0.2.1 IP 10.0.2.2 item Configuration
Switch Series. Troubleshooting Guide. ES 3500 Series. GS 1920 Series / 2210 Series / 3700 Series. XGS 2210 Series / 3700 Series / 4500 Series
Switch Series ES 3500 Series GS 1920 Series / 2210 Series / 3700 Series XGS 2210 Series / 3700 Series / 4500 Series XS 1920-12 / 3700-24/ 3900-48 Firmware Version 4.00~4.30 Edition 1, 9/2016 Troubleshooting
Example: Configuring IP Source Guard on a Data VLAN That Shares an Interface with a Voice VLAN
Example: Configuring IP Source Guard on a Data VLAN That Shares an Interface with a Voice VLAN Requirements Ethernet LAN switches are vulnerable to attacks that involve spoofing (forging) of source IP
Lecture (03) VLANs 4.0 PC2 PC1 PC4 PC3. By: Dr. Ahmed ElShafee. Topology. Dr. Ahmed ElShafee, ACU : Fall 2015, Practical App. Networks II IP
Lecture (03) VLANs By: Dr. Ahmed ElShafee 4.0 ١ Dr. Ahmed ElShafee, ACU : Fall 2015, Practical App. Networks II ٢ Topology Gateway Gateway PC1 DNS Port status Band width Duplex On PC2 DNS Port status Band
Management Software AT-S67 AT-S68. User s Guide FOR USE WITH AT-FS7016 AND AT-FS7024 SMART SWITCHES VERSION PN Rev A
Management Software AT-S67 AT-S68 User s Guide FOR USE WITH AT-FS7016 AND AT-FS7024 SMART SWITCHES VERSION 1.0.0 PN 613-50494-00 Rev A Copyright 2003 Allied Telesyn, Inc. 960 Stewart Drive Suite B, Sunnyvale,
Configuring SPAN. Understanding SPAN CHAPTER. This chapter describes how to configure Switched Port Analyzer (SPAN) and on the Catalyst 2960 switch.
CHAPTER 23 This chapter describes how to configure Switched Port Analyzer (SPAN) and on the Catalyst 2960 switch. Note For complete syntax and usage information for the commands used in this chapter, see
FSOS Ethernet Port Configuration
FSOS Ethernet Port Configuration Contents 1. Ethernet Port Configuration...1 1.1 Ethernet Port Overview... 1 1.1.1 Link Type of Ethernet Ports... 1 1.1.2 Configuring Default VLAN ID for an Ethernet Port...
Sample Configuration of Avaya Distributed Office s Dynamic Host Configuration Protocol (DHCP) to support Multiple IP Networks Issue 1.
Avaya Solution & Interoperability Test Lab Sample Configuration of Avaya Distributed Office s Dynamic Host Configuration Protocol (DHCP) to support Multiple IP Networks Issue 1.0 Abstract These Application
EKI-1500 Trouble Shooting when using Linux VCOM driver
EKI-1500 Trouble Shooting when using Linux VCOM driver Purpose This paper would show how to monitor virtual com state in Linux OS. This paper was designed to provide critical real-time driver status, which
Triple-Play service is the service that integrates data, voice and video services on IP network.
7.1 Introduction Triple Play Setting Triple-Play service is the service that integrates data, voice and video services on IP network. More and more ISPs are preparing this service for home users. For adapting
Table of Contents Chapter 1 Multicast VLAN Configuration
Table of Contents Table of Contents... 1-1 1.1 Multicast VLAN Overview... 1-1 1.2 Configuring Multicast VLAN... 1-1 1.3 Multicast VLAN Configuration Examples... 1-2 1.4 Introduction to Multicast VLAN PLUS...
SWP-0208G, 8+2SFP. 8-Port Gigabit Web Smart Switch. User s Manual
SWP-0208G 1 SWP-0208G, 8+2SFP 8-Port Gigabit Web Smart Switch User s Manual Version: 3.4 April 1, 2008 2 TABLE OF CONTENT 1.0 INTRODUCTION...4 1.1 MAIN FEATURES...4 1.2 START TO MANAGE THIS SWITCH...6
Overlapping VLANs for Industrial Applications
Setting up Dependable Overlapping VLANs for Industrial Applications Facts VLANs: A brief history Dr. Dave Sincoskie (1954-2010) developed what is now called the VLAN in the late 1980s. His creation was
CHAPTER 1: VLANS. Routing & Switching
CHAPTER 1: VLANS Routing & Switching CHAPTER 1 1.1 VLAN Segmentation 1.2 VLAN Implementation 1.3 VLAN Security and Design 1.4 Summary CHAPTER 1 : OBJECTIVES Explain the purpose of VLANs in a switched network.
Managed Ethernet Switch User s Manual
Managed Ethernet Switch User s Manual Information Coding: UM00D908 Version: V1.1 Product version: all Product Name: Managed Industrial Ethernet Switches on DIN Rail and Rack. Applicable to: Technical Support
AN-135. Introduction. VLAN Overview IEEE 802.1Q VLAN Q Tag Based and Port Based VLAN Function and Setting in KSZ8995M/MA
AN-135 802.1Q Tag Based and Port Based VLAN Function and Setting in KSZ8995M/MA Introduction This document will discuss IEEE802.1Q tag-based VLAN and port-based VLAN setup for the KSZ8995M/MA devices.
SCALANCE XM-400 / XR-500 as Static Router SCALANCE XM-400, SCALANCE XR-500 https://support.industry.siemens.com/cs/ww/en/view/109762688 Siemens Industry Online Support This entry is from the Siemens Industry
DELL DCAN-100. Dell Networking Associate.
DELL DCAN-100 Dell Networking Associate https://killexams.com/pass4sure/exam-detail/dcan-100 QUESTION: 49 A technician applies an IPv4 address to the Out-Of-Band/Management port of a Dell NSeries switch.
Table of Contents 1 QinQ Configuration BPDU Tunneling Configuration 2-1
Table of Contents 1 QinQ Configuration 1-1 Introduction to QinQ 1-1 Understanding QinQ 1-1 Implementations of QinQ 1-2 Modification of TPID Value of QinQ Frames 1-3 Configuring Basic QinQ 1-4 Configuring
Equalizer Quick Start Guide
Equalizer Quick Start Guide Equalizer is the premier Load Balancing appliance that is easy to set up and administer. To get Equalizer onto your network and into operation, follow these steps. Step 1: Initial
DEPLOYING A STACK OF DELL M-SERIES BLADE SWITCHES IN SIMPLE SWITCH MODE (SSM)
Deploying DEPLOYING A STACK OF DELL M-SERIES BLADE SWITCHES IN SIMPLE SWITCH MODE (SSM) Victor Lama DELL Network Sales Engineer Banking and Securities v1.0 5 APR 2012 A detailed case study of a client
Lecture (04) Using VLANs to segment LANs. Dr. Ahmed M. ElShafee. Dr. Ahmed ElShafee, ACU Spring 2014, Practical Applications in Computer Networks 4.
Lecture (04) Using VLANs to segment LANs Dr. Ahmed M. ElShafee ١ 4.0 ٢ Topology ٣ item Configuration item Configuration Gateway Gateway PC1 DNS Port status Band width Duplex On PC2 DNS Port status Band
Abstract. GAK; Reviewed: WCH 8/14/2003. Solution & Interoperability Test Lab Application Notes 2003 Avaya Inc. All Rights Reserved.
Rapid Reconfiguration Spanning Tree Protocol (RSTP) 802.1w Sample Configurations for Avaya P882/P580 Gigabit Ethernet Switches with Third Party Vendors including Cisco, HP and Foundry - Issue 1.0 Abstract
User Handbook. Switch Series. Default Login Details. Version 1.0 Edition
User Handbook Switch Series Zyxel GS1920 / GS2210 / XGS2210 / GS3700 / XGS3700 / XGS4600 / XS1920 / XS3700 Default Login Details LAN IP Address https://192.168.1.1 User Name admin Password 1234 Version
FCN-3112 Series. 10/100/1000TX to 1000SX SNMP Managed Media Converter. Version 1.0 User Manual
FCN-3112 Series 10/100/1000TX to 1000SX SNMP Managed Media Converter Version 1.0 User Manual Copyright 2018 Antaira Technologies, LLC. All Rights Reserved This document contains information, which is protected
VLAN. Mario Baldi. Pietro Nicoletti. Politecnico di Torino. Studio Reti
VLAN Mario Baldi Politecnico di Torino http://staff.polito.it/mario.baldi Pietro Nicoletti Studio Reti http://www.studioreti.it Based on chapter 5 of: M. Baldi, P. Nicoletti, Switched LAN, McGraw-Hill,
VLANs Level 3 Unit 9 Computer Networks
VLANs Some Requirements of LANs Need to split up broadcast domains to make good use of bandwidth People in different departments may need to be grouped together for access to servers Security: restrict
Bridge Functions Consortium
Quality/Class of Service Conformance Test Suite Version 0.3 Last Updated: 2005-09-23 121 Technology Drive, Suite 2 University of New Hampshire Durham, NH 03824 Phone: (603) 862-0090 www.iol.unh.edu Fax:
A Dell Interoperability Whitepaper Victor Teeter
Deployment of Dell M8024-k Blade Switch with Cisco Nexus 5000 Series Switch A Dell Interoperability Whitepaper Victor Teeter THIS TECHNICAL INTEROPERABILITY WHITE PAPER IS FOR INFORMATIONAL PURPOSES ONLY,
Configuring Interface Characteristics
CHAPTER 12 This chapter defines the types of Catalyst 2975 interfaces and describes how to configure them. Unless otherwise noted, the term switch refers to a standalone switch and a switch stack. Understanding
Chapter 3. Virtual Local Area Networks (VLANs) Part II
Chapter 3 Virtual Local Area Networks (VLANs) Part II CCNA3-1 Chapter 3-2 Note for Instructors These presentations are the result of a collaboration among the instructors at St. Clair College in Windsor,
Risanuri Hidayat. 13/03/2012 Jurusan Teknik Elektro dan Tekn Informasi UGM
Risanuri Hidayat 1 Ilustrasi 2 VLAN JTETI UGM 3 Virtual LAN A virtual LAN (VLAN) is a group of PCs, servers, and other network resources that behave as if they were connected to a single network segment
DLC205/DLM205. Gig-E Aggregators and Optical Tranceivers. Installation and Operations. Manual
Manual DigiLink DLC205/DLM205 Function modules Gig-E Aggregators and Optical Tranceivers Installation and Operations Manual WWW.ARTEL.COM ii DLC205 and DLM205 Function Module Installation and Operations
Junos Enterprise Switching
Junos Enterprise Switching Chapter 6: Device Security and Firewall Filters 2011 Juniper Networks, Inc. All rights reserved. www.juniper.net Worldwide Education Services Chapter Objectives After successfully
PFC and Untagged Frames
PFC and Untagged Frames bb-ghanwani-pfc-untagged-0509-v1 Anoop Ghanwani (anoop@brocade.com) Dan Eisenhauer (dge@us.ibm.com) Rakesh Sharma (rakesh@us.ibm.com) May 2009 Overview Motivation Types of untagged
NetComm Limited 802.1Q VLAN Tagging with the IAC4500 & NP2724M. IAC4500 Port-Location Mapping with the NP2724M VLAN Switch
IAC4500 Port-Location Mapping with the NP2724M VLAN Switch Introduction The following paper provides instructions on how to configure NetComm s IAC4500 Internet Access Controller with NetComm s NP2724M
Example: Configuring DHCP Snooping and DAI to Protect the Switch from ARP Spoofing Attacks
Example: Configuring DHCP Snooping and DAI to Protect the Switch from ARP Spoofing Attacks In an ARP spoofing attack, the attacker associates its own MAC address with the IP address of a network device
VLAN - SP6510P8 2013/4. Copyright 2011 Micronet Communications, INC
VLAN - SP6510P8 2013/4 www.micronet.info Copyright 2011 Micronet Communications, INC Agenda VLAN Protocol VLAN Voice VLAN www.micronet.info 2 Micronet Communications Inc. Benefit Bandwidth Preservation
QinQ Operation. Page 1 of 11
QinQ Operation Page 1 of 11 Chapter 1 Contents QinQ Configuration...3 1.1 Introduction to QinQ... 3 1.1.1 Understanding QinQ...3 1.1.2 Implementations of QinQ...4 1.1.3 Modification of TPID Value of QinQ
Management Software AT-S101. User s Guide. For use with the AT-GS950/8POE Gigabit Ethernet WebSmart Switch. Version Rev.
Management Software AT-S101 User s Guide For use with the AT-GS950/8POE Gigabit Ethernet WebSmart Switch Version 1.0.0 613-000985 Rev. A Copyright 2008 Allied Telesis, Inc. All rights reserved. No part
Cisco Discovery Protocol Version 2
Cisco Discovery Protocol (formerly known as CDP) is a Layer 2, media-independent, and network-independent protocol that runs on Cisco devices and enables networking applications to learn about directly
Configuring BPDU tunneling
Contents Configuring BPDU tunneling 1 Introduction to BPDU tunneling 1 Background 1 BPDU Tunneling implementation 2 Configuring BPDU tunneling 3 Configuration prerequisites 3 Enabling BPDU tunneling for
Optical Line Terminal Equipment. Element Management System. User Manual
Optical Line Terminal Equipment Element Management System User Manual Version 1.2 1 / 98 Thank you for choosing our products. Preface Revision History Version Revision date Revision Reason V 1.1 15/10/2015
Configuring IEEE 802.1Q Tunneling and Layer 2 Protocol Tunneling
CHAPTER 14 Configuring IEEE 802.1Q Tunneling and Layer 2 Protocol Tunneling With Release 12.1(13)E and later, the Catalyst 6500 series switches support IEEE 802.1Q tunneling and Layer 2 protocol tunneling.
DSLAM using Port Location Mapping
How to configure NetComm IAC3000 with NCT192 IP DSLAM using Port Location Mapping Introduction The following paper provides instructions on how to configure NetComm s IAC3000 Internet Access Controller
LevelOne GES GE with 1 Combo SFP Web Smart Switch User Manual
LevelOne GES-0852 8 GE with 1 Combo SFP Web Smart Switch User Manual Version 1.0-1109 1 FCC Certifications This Equipment has been tested and found to comply with the limits for a Class A digital device,
Configuring VLAN-VPN CHAPTERS
CHAPTERS 1. VLAN-VPN 2. Basic VLAN-VPN Configuration 3. Flexible VLAN-VPN Configuration 4. Configuration Example 5. Appendix: Default Parameters VLAN-VPN This guide applies to: T2600G-28TS v3 or above,
AT-S79 Version ( ) Management Software for the AT-GS950/16 and AT-GS950/24 Gigabit Ethernet Smart Switches Software Release Notes
AT-S79 Version 2.3.0 (1.0.0.90) Management Software for the AT-GS950/16 and AT-GS950/24 Gigabit Ethernet Smart Switches Software Release Notes Please read this document before you begin to use the management
AT-S79 Version Management Software for the AT-GS950/16 and AT-GS950/24 Gigabit Ethernet Smart Switches Software Release Notes
AT-S79 Version 2.2.1 Management Software for the AT-GS950/16 and AT-GS950/24 Gigabit Ethernet Smart Switches Software Release Notes Please read this document before you begin to use the management software.
Configuring Q-in-Q VLAN Tunnels
This chapter contains the following sections: Information About Q-in-Q VLAN Tunnels, page 1 Licensing Requirements for Q-in-Q Tunnels, page 4 Guidelines and Limitations for Q-in-Q VLAN Tunnels, page 5
Introduction Of. WebAccess/NMS. ICG AE John Huang
Introduction Of WebAccess/NMS ICG AE John Huang Agenda Introduction for WebAccess/NMS System Architecture WebAccess/NMS Key Features V1.2.4 new functions Installation & Configuration FAQ PS: If you have
CISCO SG300 WHITEPAPER
Cisco SG300 Whitepaper - Just Add Power CISCO SG300 WHITEPAPER Revised 2018-07-01 2018 Just Add Power All rights reserved Unauthorized use or disclosure hibited Last updated Jul-18 Cisco SG300 Whitepaper
Abstract. Avaya Solution & Interoperability Test Lab
Avaya Solution & Interoperability Test Lab Configuring Avaya S8300 Media Server and Avaya S8300 Media Server Local Survivable Processor with Enterasys Vertical Horizon VH-2402L3 and VH-2402S Issue 1.0
Lab 2. Spanning Tree Protocols. Overview. JNCIS-ENT++ Bootcamp
Lab 2 Spanning Tree Protocols Overview This lab demonstrates basic configuration and monitoring tasks when implementing spanning tree and some related protection features on EX Series switches. In this
Example: Configuring IP Source Guard with Other EX Series Switch Features to Mitigate Address-Spoofing Attacks on Untrusted Access Interfaces
Example: Configuring IP Source Guard with Other EX Series Switch Features to Mitigate Address-Spoofing Attacks on Untrusted Access Interfaces Requirements Ethernet LAN switches are vulnerable to attacks
Layer 2 Engineering VLANs
Layer 2 Engineering VLANs Campus Network Design & Operations Workshop These materials are licensed under the Creative Commons Attribution-NonCommercial 4.0 International license (http://creativecommons.org/licenses/by-nc/4.0/)
Configuring Link Aggregation
Information About Link Aggregation, page 1 Restrictions for Link Aggregation, page 2 (GUI), page 4 (CLI), page 4 Verifying Link Aggregation Settings (CLI), page 5 Configuring Neighbor Devices to Support
2.4GHz 300Mbps 11b/g/n 29dBm AP/Router/WDS Bridge/WDS AP/WDS station/cb/cr/up. Software Features System Requirement. Status
is a 300Mbps wireless-n multi-function gigabit AP/CB which offers unlimited coverage, strong penetration, secure network management and 802.3af PoE connection. Package Contents - 1* - 1*12V/1A Power Adapter
QoS Setup Guide. Application Note 306 QoS Setup Procedure. QoS Set-up Guide
QoS Set-up Guide This application note describes how to set-up QoS on Transition Networks ION modules that support Layer-2 switch QoS functions of priority classification, queuing and remarking. 1. Port
Switch Quick Configuration CLI Guide for
Switch Quick Configuration CLI Guide for SSE-G48-TG4 SSE-G24-TG4 SSE-X24S SBM-GEM-X2C SBM-GEM-X2C+ SBM-GEM-X3S+ SBM-XEM-X10SM Release : 1.0b 1 / 19 The information in this User s Manual has been carefully
Configure Global Link Layer Discovery Protocol (LLDP) Settings on a Switch through the Command Line Interface (CLI)
Configure Global Link Layer Discovery Protocol (LLDP) Settings on a Switch through the Command Line Interface (CLI) Objective Link Layer Discovery Protocol (LLDP) Media Endpoint Discovery (MED) provides
Configuring Link Aggregation
Information About Link Aggregation, page 1 Restrictions for Link Aggregation, page 1 (GUI), page 3 (CLI), page 4 Verifying Link Aggregation Settings (CLI), page 4 Configuring Neighbor Devices to Support
Configuring VLANs. Understanding VLANs CHAPTER
CHAPTER 14 This chapter describes how to configure normal-range VLANs (VLAN IDs 1 to 1005) and extended-range VLANs (VLAN IDs 1006 to 4094). It includes information about VLAN modes and the VLAN Membership
EPON Optical Line Terminal Equipment
EPON Optical Line Terminal Equipment Configuration Guide Version:V1.2 深圳市西迪特科技有限公司 SHENZHEN C-DATA TECHNOLOGY CO., LTD. Statement The copyright of this manual is owned by our company. Without the permission
Question No : 1 Which three of these statements regarding 802.1Q trunking are correct? (Choose three.)
Volume: 149 Questions Question No : 1 Which three of these statements regarding 802.1Q trunking are correct? (Choose three.) A. 802.1Q native VLAN frames are untagged by default. B. 802.1Q trunking ports
WFS709TP Case Scenario: Wireless deployment for a Corporate and Public network
WFS709TP Case Scenario: Wireless deployment for a Corporate and Public network This document describes the activities undertaken to deploy a Wireless solution using the Wireless Controller WFS709TP and
Configuring SPAN and RSPAN
24 CHAPTER This chapter describes how to configure Switched Port Analyzer (SPAN) and Remote SPAN (RSPAN) on your Catalyst 2950 or Catalyst 2955 switch. Note For complete syntax and usage information for
Example: Configuring Static MAC Bypass of Authentication on an EX Series Switch
Example: Configuring Static MAC Bypass of Authentication on an EX Series Switch Requirements To allow devices to access your LAN through 802.1X-configured interfaces without authentication, you can configure
Huawei H HCNP R&S Fast Track.
Huawei H12-224 HCNP R&S Fast Track http://killexams.com/pass4sure/exam-detail/h12-224 Question: 591 Which statements about the MUX VLAN configuration are true? (Select 2 Answers) [Quidway]vlan 10 [Quidway-vlan10]mux-vlan
Configuring SPAN and RSPAN
Finding Feature Information, page 1 Prerequisites for SPAN and RSPAN, page 1 Restrictions for SPAN and RSPAN, page 2 Information About SPAN and RSPAN, page 3 How to Configure SPAN and RSPAN, page 14 Monitoring
PRODUCT OVERVIEW SOFTWARE FEATURES. Windows Windows7, 98, ME, NT, XP, Mac OS X (10.7) System Information. Current Wireless Setting
2.4 GHz 300Mbps Long Range Multi-function Gigabit AP/CB 11b/g/n PRODUCT OVERVIEW is a 300Mbps wireless-n multi-function gigabit AP/CB which offers unlimited coverage, strong penetration, secure network
EAP350 EAP350. Long Range Ceiling Mount Access Point PRODUCT OVERVIEW
Long Range Ceiling Mount Access Point 2.4 GHz 300Mbps 11b/g/n 28dBm AP/WDS PRODUCT OVERVIEW is a 300Mbps wireless-n ceiling mount AP which offers users extended coverage, strong penetration, secure network
Routing Between VLANs Overview
Routing Between VLANs Overview This chapter provides an overview of VLANs. It describes the encapsulation protocols used for routing between VLANs and provides some basic information about designing VLANs.
Bridge Functions Consortium
Hardware Rate Limiting Feature Verification Test Suite Version 0.1 Last Updated: 2005-09-05 121 Technology Drive, Suite 2 University of New Hampshire Durham, NH 03824 Phone: (603) 862-0090 www.iol.unh.edu
Application Notes for Mirage Networks CounterPoint in an Avaya IP Telephony Infrastructure Issue 1.0
Avaya Solution & Interoperability Test Lab Application Notes for Mirage Networks CounterPoint in an Avaya IP Telephony Infrastructure Issue 1.0 Abstract These Application Notes describe a configuration
Network Configuration Example
Network Configuration Example Configuring Private VLANs on a QFX Switch Using Extended Functionality Modified: 2016-08-01 Juniper Networks, Inc. 1133 Innovation Way Sunnyvale, California 94089 USA 408-745-2000
Advantech AE Technical Share Document
Advantech AE Technical Share Document Date 02/02/2016 Release Note Internal External Category FAQ SOP Related OS Windows OS Abstract How to set up device server/modbus GW configuration in Web-Based interface
EAP150. Long Range Ceiling Mount Access Point PRODUCT OVERVIEW
Long Range Ceiling Mount Access Point 2.4 GHz 150Mbps 11b/g/n 26dBm Router/AP PRODUCT OVERVIEW is a 150Mbps wireless-n ceiling mount AP which offers users extended coverage, strong penetration, secure
Table of Contents 1 QinQ Configuration 1-1
Table of Contents 1 QinQ Configuration 1-1 Introduction to QinQ 1-1 Background 1-1 QinQ Mechanism and Benefits 1-1 QinQ Frame Structure 1-2 Implementations of QinQ 1-3 Modification of the TPID Value in