FLASHWAVE 5320 Ethernet Services Platform

Transcription

1 shaping tomorrow with you The provides intelligent service demarcation and aggregation for Ethernet business and cloud services, such as hosted voice, videoconferencing, backup/recovery, and hosted applications. The platform delivers Carrier Ethernet connectivity through the access network directly to customer premises. The platform can be deployed in remote locations from wiring closets to road side cabinets, enabling costeffective extension of Ethernet, IP, and intelligent cloud services to business parks, multitenant buildings, cell towers, and Wi-fi hotspots. 1

2 Standards-Based Carrier Ethernet Delivery Designed to support MEF CE standards, the Ethernet Services Platform delivers Ethernet Private Line (EPL), Ethernet Virtual Private Line (EVPL), and Ethernet LAN-based connectivity for highcapacity business and 4G mobile backhaul services. With hardwarebased 3.3 ms Continuity Check Messages (CCMs) and Ethernet Ring Protection Switching (ERPS), the platform delivers sub-50 ms protection switching capabilities. The platform also provides standardized User-Network Interface (UNI), Network-to- Network Interface (NNI), and service and traffic management features. These capabilities allow service definition on a per-port, priority, or VLAN basis. Differentiated service levels can be future-defined using traffic prioritization, policing, shaping, and flow control mechanisms. Service-Level Provisioning, Monitoring, and Management Network management is provided through graphical user interfaces based on SNMP, supported by in-band or out-of-band interface options and by NETSMART 1200, a full-featured network management system. The management view ranges from the individual node to an end-to-end network- and service-centric view. Key Features Carrier-class platform Fixed form-factor design Ideal for deployment in customer premises and aggregation environments 24 x SFP and 2 x XFP ports with Carrier Ethernet service scalability from 1 Mbps to 10 Gbps Low-latency Highly reliable service delivery with G.8032 sub 50ms ring protection High-precision SLAs and service performance monitoring and reporting via Y.1731 Ethernet Fault Propagation Shutdown (EFPSD) monitoring Integrated SLA hardware eliminating the need for a standalone NID Standards-based Carrier Ethernet services Deep fault and performance management with Y.1731, including loopback, link trace, delay, jitter and loss measurement Customer SLA portal access Dedicated Performance Monitoring Hardware The platform features dedicated hardware for traffic performance monitoring, enabling the platform to address today s requirement for hardware-based Y.1731 latency, jitter and frame-loss ratio measurements. Hardware-based MAC address swapping enables station loopbacks to allow centralized test sets for service turn-up and performance verification. Tiered Ethernet services as well as wireless backhaul service-level performance may also be monitored through the Web-based SLA portal. 2

3 Key Applications Applications The is designed for three key applications: Mobile backhaul Enterprise service delivery Access infrastructure Mobile Backhaul Optimized for mobile backhaul, the Ethernet Services Platform provides enhanced traffic management features that support consistently optimal performance. It delivers high resiliency and reliability in complex, high-traffic networks during peak-traffic times. It also offers guaranteed minimal bandwidth support, while dynamically allocating individual EVCs to peak rates. Optional sub-50 ms network resiliency, using G.8032, offers selective service protection. This platform is the high-performance cell tower aggregation solution for five-nines carrier-class backhauling of 4G LTE services. Mobile backhaul is experiencing an explosion in traffic bandwidth demand. Wireless operators are moving from leased lines to dark fiber as part of their solution and must leverage wavelengths to secure their investment for future expansion at minimal additional cost. The solution to their backhaul needs includes the system as shown in the diagram below, delivering redundancy at all critical points: Even (green)/odd(orange) traffic replication Ring-based service aggregation with redundant E-Line EVCs per cell site Throughput turn-up testing Y.1731 performance monitoring End-to-end service protection NESMART 1200 GE WDM or Odd Even MSC 7U Shelf with Layer 2 An ideal solution for 4G mobile backhaul 3

4 Key Applications Enterprise Service Delivery The system is the ideal aggregation solution for delivering Ethernet business services. High-density Ethernet service interfaces allow large numbers of data customers to be supported on a single system. Integrated traffic management, data aggregation, and E-Line and E-LAN technologies provide robust, carrier-grade data services with guaranteed SLAs. Some businesses require relatively small flows (10 to 100 Mbps), which can use a switched Ethernet access network for economical transport. Other businesses, however, require the entire 1 GbE and need it completely intact including the framing bits (transparent). Both customer types can use the platform for further aggregation before handing off higher end interfaces. NESMART 1200 GE WDM or Layer 3 Services 7U Shelf with Layer 2 Enterprise Ethernet Services Delivery 4

5 Network Services Fujitsu offers a broad selection of professional services for every stage in a network s evolution and operation. From planning through deployment and ongoing maintenance to future enhancements, Fujitsu Network Services are available whenever needed. Fujitsu sales representatives can guide service providers in selecting options that address individual business needs. Popular planning and deployment services for the platform include: Custom Cabinet Solutions Turnkey inside wall-mount and outsideplant solutions, including standard and custom configurations for wireline, wireless, FTTx, cable and MSO customers Furnish Material Identification and ordering of the material needed to install network equipment such as electrical and fiber cable solutions, minor materials and third-party ancillary equipment Turn-Up and Test From on-site configuration and simple turn-up to rigorous, long-term testing Network Operations Network operations are a large part of the expense of a network. The design, implementation, and maintenance of a network all play a part in this operational expense. NETSMART 1200 is an excellent tool for streamlining the process of deploying and maintaining an Ethernet network. The is fully supported by the NETSMART 1200 system. Of particular interest is that NETSMART 1200 provides for a Metro Ethernet Forum (MEF) approach to operations. The platform uses MEF terms and concepts for provisioning and allocating resources, which greatly simplifies the operational aspect. The platform also determines flows based on the CIR/CBS/EIR/EBS and reduces complexity and the need to know the complex intricacies of the systems. It makes Ethernet provisioning simple and easy. The NETSMART 1200 system also covers all of the network functions, including WDM and Ethernet. Maintenance and Support Program For a complete professional maintenance solution, the Fujitsu Maintenance and Support Program has the right combination of flexibility and comprehensive assurance. Choose the level and types of service you need to supplement your own resources. The Maintenance and Support Program helps keep your network running smoothly, provides critical care and protects the longevity of your investment. Managed Network Solutions With a full range of vendor-independent network fault and performance monitoring features, the Fujitsu Managed Network Solutions offer guaranteed, round-the-clock system protection. Our reliable NOC facility is available as a primary or supplemental operations resource. This service not only helps you control costs and maintain high levels of customer satisfaction, it also provides trustworthy and reliable after-hours and emergency monitoring. Choose Your Level of Services Performance Monitoring Support When You Need It Network Operations Center Control Costs On-Site Configuration Turn-Up & Test Customer Satisfaction Furnish Materials 5

6 Features and Specifications Base System Hardware Network Protection Modularity Size 2RU (H x W x D) Weight (base unit) Ethernet Ports Console Ports Out-of-Band Management Ethernet Switching Switching Fabric Packets per Second MAC Address Table Jumbo Frames VLAN Tagging 802.1Q Provider Bridging 802.1ad Hot-swappable AC and DC Hot-swappable fan unit Hot swappable air filter 3.5 x 17.3 x 10.2 (88 x 440 x 260 mm) 17.1 lbs. (8.1 kg) 24 x FE/GE SFP ports 2 x 10 GbE XFP ports RJ-45 serial port Local craft access 10/100 Mbps Ethernet RJ Gbps 96 Mpps 32 K table entries Enable/disable learning per port 9600 Bytes 4094 C-VLANs 4094 S-VLANs Ethernet Ring Protection Switching Link Aggregation Ethernet Services Security Management <50 ms protection switching 3.3ms CCMs in hardware Non-revertive /revertive ITU-T Multiple instances/laddered rings LAG with LACP (802.3ad) E-LINE and E-LAN MEF abstraction layer Access control list Port mirroring Storm control SNMP v2c and MIB-II Private and public MIBs FTP, Telnet and SSH In-band and out-ofband RADIUS Local sys log Tagging Traffic QoS Priority Queues Traffic Classification Bandwidth Meters CVLAN translation Double tagging Tagging, de-tagging, swapping Virtual untagged 8 queues per port 802.1P, Port, VLAN, ToS, DSCP CIR/CBS and PIR/PBS 2-rate 3-color (2R3C) Bandwidth profiles Ingress and egress filters Per service in 1 Mbps increments up to 1 Gbps Performance Monitoring Ethernet SLA PMs Ethernet Port PMs 24 hr, 15 min, and 5 min PM bins Y.1731 frame delay Y.1731 delay variation Y.1731 loss ratio Throughput measurement Rx, Tx and error statistics Input and output rate per port Input and output utilization per port Ethernet OAM Fault Management Y.1731 CCMs Loopback and link trace Loopbacks Station loopback Loopback based on L2 filter MAC address swap for RFC 2544 Topology Discovery LLDP 6

7 Features and Specifications Operation Operating Temperature Short Term Temperature Humidity Power Supply Power Redundancy Nominal Power Maximum Power Fan Unit Regulatory 4 to 159 F ( 20 to +65 C) 13 to 167 F ( 25 to +75 C) Up to 90% non-condensing DC: 48 V DC ( 36 to 72 V DC) AC: redundant power supply DC supporting A and B feed per power supply 75 W 100 W Hot-swappable fan unit CSA/UL CE mark ROHS 5/6 Fujitsu Network Communications Inc Telecom Parkway, Richardson, TX Tel: us.fujitsu.com/telecom Copyright 2013 Fujitsu Network Communications, Inc. and NETSMART are trademarks of Fujitsu Network Communications Inc. (USA). FUJITSU (and design) and shaping tomorrow with you are trademarks of Fujitsu Limited in the United States and other countries. All Rights Reserved. All other trademarks are the property of their respective owners. Configuration requirements for certain uses are described in the product documentation. Features and specifications subject to change without notice. 1.0/09.13