Generate Export Data Source
|
|
- Rosaline Chapman
- 5 years ago
- Views:
Transcription
1 Applies to: SAP BI 7.0 developers and support Users. For more information, visit the EDW homepage Summary This paper describes the data mart interface which makes it possible to update data from one data target into another. A Business Information Warehouse represents a source system for another Business Information Warehouse by: providing metadata providing transaction and master data The data-delivering system is then referred to as the source BW, the data-receiving system as the target BW. An export Data Sources is needed to transfer data from a source BW into a target BW. This export Data Sources for Info Cubes and ODS objects includes an extract structure that contains all the characteristics and key figures of the data target. Export Data Sources for master data contain the metadata for all attributes, texts and hierarchies for an Info Object. Author: Dinesh V Company: IGate Global Solutions Limited Created on: 01 May 2011 Author Bio Dinesh is working as a SAP BW/BI Consultant in IGate Global Solutions Limited, India. His expertise include SAP BW 3.5, SAP BI 7.0 and ABAP developments SAP AG 1
2 Table of Contents Introduction... 3 Prerequisite... 4 Define the Source System... 4 Export DataSource for a Data Target... 6 Step 1: Generate Meta Data... 6 Step 2: Replicate Meta Data... 7 Step 3: Create Transfer Rules / Transformation to the target... 7 Step 4: Create Info Package... 8 Step 5: Load Data... 8 Master Data Export DataSource... 9 Step 1: Generate Meta Data... 9 Step 2: Replicate Meta Data Step 3: Create Transfer Rules / Transformation to the target Step 4: Create Info Package Step 5: Load Data Delta Process for transaction Data Related Content Disclaimer and Liability Notice SAP AG 2
3 Introduction The Generate Export Data Source is a data mart interface which can be used between two BW Systems or between another SAP system and a BW System: to enable large amounts of data to be processed. to increase the respective speeds of data transfer, logging and analysis. to achieve improved concision and maintenance of the individual Data Warehouses. to enable data separation relating to the task area, on the one hand, and to be able to perform analyses of the state of the entire dataset on the other. to make it possible to have fewer complexities when constructing and implementing a Data Warehouse. to construct hub and spoke scenarios in which a BW stands in the middle and the data from distributed systems runs together and is standardized. Figure1:- Data Mart Interface 2011 SAP AG 3
4 Prerequisite Define the Source System The prerequisite to load the data from source BW system to target BW system is to create a BW source system in the target BW Administrator Workbench. 1. In the SAP BW Administrator Workbench (RSA1), in the SOURCE SYSTEM, right click on BI folder to create a new Source System Context Menu. Create and choose the radio button for creating an external system automatically. Figure 2:- Create Source System 2. Assign the available destination or create new destination by entering the below information of the source BW system. Target Computer (server) System ID (system name) System number Figure 3:- Create new destination 2011 SAP AG 4
5 3. Enter the background user, password that you defined for the SAP BW background user in the source BW system and background user, password for SAP BW user in the target BW system. If the user already exists in the source system, enter the valid password. Figure 3:- BW Source System 4. Select the relevant clients and logon as a system administrator. First make sure that you have the authority to create users and RFC destinations SAP AG 5
6 Export DataSource for a Data Target The Meta data objects like data source and extract structure having the information about the structure of the data requested should be defined to transfer data from source BW system to the target BW system. You can generate an export DataSource for the respective data target in the source BW. This export DataSource includes an extract structure, which contains all the characteristics and key figures of the data target. Step 1: Generate Meta Data Right click on the Info Provider (RSA1) in the source BW and select Additional Properties Generate Export DataSource. The technical name of the export DataSource is derived from the number 8 together with the name of the data target. For Example:- Technical name of an Info Cube: 0PAPD_C02 Technical name of the export DataSource: 80PAPD_C02 Figure 3:-Generate Export DataSource for Info Cube 2011 SAP AG 6
7 Figure 4:- Export Data Source Step 2: Replicate Meta Data Select the Application component DM (Data Marts) and Right click Replicate Metadata in the target BW to replicate the export data source of source BW. Change the data source to Edit Mode and activate the data source. Figure 5:- Replicate Metadata Step 3: Create Transfer Rules / Transformation to the target As per the standard SAP BI 7.0 practices, create the transformation on the exported data sources to the info providers like Info Source, DSO or Info Cube. Figure 6:- Transformation using Export Data source 2011 SAP AG 7
8 Step 4: Create Info Package Create the Info package and DTP for scheduling the data flow as per the standard SAP BI 7.0 rules using the export data source. Step 5: Load Data Figure 7:- Info Package and DTP using Export Data Source Schedule the Info package and DTP manually or include them in the process chain to load the data to the targets from the export data source SAP AG 8
9 Master Data Export DataSource A DataSource is needed to transfer data from a source BW into a target BW. You can generate an export DataSource for master data, and thus for individual Info Objects. By doing this, all the metadata is created that is required to extract master data (all attributes, texts and hierarchies) from an Info Object. Step 1: Generate Meta Data Right click on Info Object (master data) (RSA1) in the source BW and select Additional Properties Generate Export DataSource. The metadata of an export DataSource is generated as it exists in the source BW.... The technical name of the export DataSource is called 8******M. for attributes (M stands for 'master data') 8******T for texts. 8******H for hierarchies. For example: Technical name of an Info Object: 0MATERIAL Technical name of the export DataSource for attributes: 80MATERIALM Technical name of the export DataSource for Texts: 80MATERIALT Figure 8:- Generate Export DataSource 2011 SAP AG 9
10 Step 2: Replicate Meta Data Select the Application component DM-IO (Data Marts Info Objects) and Right click Replicate Metadata in the target BW to replicate the export data source of source BW. Change the data source to Edit Mode and activate the data source if it s inactive. Figure 9:- Replicate Data Sources Step 3: Create Transfer Rules / Transformation to the target As per the standard SAP BI 7.0 practices, create the transformation on the exported data sources to the info objects for attributes, texts and hierarchies. Figure 6:- Transfer Rules using Export Data source 2011 SAP AG 10
11 Step 4: Create Info Package Create the Info package and DTP for scheduling the data flow as per the standard SAP BI 7.0 rules using the export data source. Step 5: Load Data Figure 7:- Info Package using Export Data Source Schedule the Info package and DTP manually or include them in the process chain to load the data to the targets from the export data source. Delta Process for transaction Data The transfer of transaction data corresponds to the data transfer for an R/3 System. The system reads the data while taking into account the specified dimension-specific selections from the fact table of the delivered Business Information Warehouse. When transferring transaction data, requests can be used to determine a delta. The distinction is made between Info Cube and ODS objects. The Info Cube that is used as an export-datasource is first initialized, meaning that the current status is transferred into the target BW. When the next upload comes around only those requests will then be transferred that have come in since the time of initialization. Different target systems can also be supplied like this. Only those requests are transferred that have been rolled up successfully in the aggregates. If no aggregates were used only those requests are transferred that are set to qualitative OK in the Info Cube Administration. For ODS objects the requests are used as the basis for determining delta, which are in the change log of the ODS object. Only the change log requests which have arisen from reactivating the ODS object data are transferred. Restriction: It is only possible to make a selection per target system for the delta For Example:- You first make a selection using cost center 1 and load deltas for this selection. At a later time you also decide to load a delta for cost center 2 in parallel to the cost center 1 delta The delta can only be requested wholly for both centers, meaning that it is then impossible to separately execute deltas for the different selection SAP AG 11
12 .. Generate Export Data Source Related Content Using the Data Mart Interface Export DataSource for a Data Target Master Data Export DataSource Create Source System For more information, visit the EDW homepage 2011 SAP AG 12
13 Disclaimer and Liability Notice This document may discuss sample coding or other information that does not include SAP official interfaces and therefore is not supported by SAP. Changes made based on this information are not supported and can be overwritten during an upgrade. SAP will not be held liable for any damages caused by using or misusing the information, code or methods suggested in this document, and anyone using these methods does so at his/her own risk. SAP offers no guarantees and assumes no responsibility or liability of any type with respect to the content of this technical article or code sample, including any liability resulting from incompatibility between the content within this document and the materials and services offered by SAP. You agree that you will not hold, or seek to hold, SAP responsible or liable with respect to the content of this document SAP AG 13
DB Connect with Delta Mechanism
Applies to: SAP BI/BW. For more information, visit the EDW homepage Summary This Article demonstrates the steps for handling Delta mechanism with Relational Database Management System (RDBMS) like SQL,
More informationExtracting Missing Fields of Data Source Which Are Present In Their Extract Structure
Extracting Missing Fields of Data Source Which Are Present In Their Extract Structure Applies to: ECC 6.0 and BI 3.x and 7.0 For more information, visit the Business Intelligence homepage. Summary Many
More informationStep by Step Procedure for DSO Creation
Step by Step Procedure for DSO Creation Applies to: SAP BI 7.0. For more information, visit the EDW homepage. Summary This article discusses about the step by step procedure for creating a DSO. Author:
More informationOpen Hub Destination - Make use of Navigational Attributes
Open Hub Destination - Make use of Navigational Attributes Applies to: SAP BI 7.0. For more information visit the Enterprise Data Warehousing Summary This paper tells about usage of Open Hub Destination
More informationHow to Create View on Different Tables and Load Data through Generic Datasource based on that View
How to Create View on Different Tables and Load Data through Generic Datasource based on that View Applies to: SAP Business Intelligence (BI 7.0). For more information, visit the EDW homepage Summary This
More informationBW Reconciliation. Applies to: Summary. Author Bio
Applies to: SAP Net Weaver Business Warehouse (Formerly BI) Business Intelligence homepage. For more information, visit the Business Intelligence homepage. For more information, visit the EDW homepage.
More informationExplore to the Update Tab of Data Transfer Process in SAP BI 7.0
Explore to the Update Tab of Data Transfer Process in SAP BI 7.0 Applies to: SAP BI 2004s or SAP BI 7.x. For more information visit the Enterprise Data Warehousing. Summary This article will explain about
More informationStep-By-Step guide to Virtual InfoCube Implementation
Step-By-Step guide to Virtual InfoCube Implementation Applies to: SAP NetWeaver BW. For more information, visit the EDW homepage Summary This article provides a detailed insight into Virtual Infocube data
More informationReal Time Data Acquisition (RDA) Overview and Step-by-Step Guide (SAPI and Web Services)
Real Time Data Acquisition (RDA) Overview and Step-by-Step Guide (SAPI and Web Services) Applies to: SAP BI 7.0. For more information, visit the Business Intelligence homepage. Summary Sometimes business
More informationHow to use Boolean Operations in the Formula as Subsidiary for IF Condition
How to use Boolean Operations in the Formula as Subsidiary for IF Condition Applies to: SAP BW 3.5 & BI 7.0. For more information, visit the EDW homepage. Summary This paper will explain you how to use
More informationStep By Step: the Process of Selective Deletion from a DSO
Step By Step: the Process of Selective Deletion from a DSO Applies to: SAP NetWeaver BW. For more information, visit the EDW homepage. Summary Selective deletion from DSO refers to deleting specific values
More informationStandalone BW System Refresh
Applies to: Software Component: SAP_BW. For more information, visit the EDW homepage Summary BW relevant steps/scenarios during refresh of an existing non-productive BW system from productive BW system
More informationErrors while Sending Packages from OLTP to BI (One of Error at the Time of Data Loads through Process Chains)
Errors while Sending Packages from OLTP to BI (One of Error at the Time of Data Loads through Process Chains) Applies to: SAP NetWeaver Business Warehouse (Formerly BI), Will also work on SAP BI 3.5. For
More informationData Extraction & DS Enhancement in SAP BI Step by Step
Data Extraction & DS Enhancement in SAP BI Step by Step Applies to: SAP BI 7.0, SAP ABAP, For more information, visit the Business Intelligence homepage. Summary The objective of the article is to outline
More informationOpen Hub Destination Basics
Applies to: SAP BI Consultants and for those who are dealing with OHD requirements of Customers. For more information, visit the Business Objects homepage. Summary The open hub destination is the object
More informationUsing Query Extract to Export Data from Business warehouse, With Pros and Cons Analyzed
Using Query Extract to Export Data from Business warehouse, With Pros and Cons Analyzed Applies to: SAP BW 3.X & BI 7.0. For more information, visit the Business Intelligence homepage. Summary This article
More informationManaging Transports in SAP BW 3.5 and BI 7.0
Managing Transports in SAP BW 3.5 and BI 7.0 Applies to: SAP BW 3.5/SAP BI 7.0. For more information, visit the Business Intelligence homepage. Summary This document explains all the features associated
More informationLinking Documents with Web Templates
Linking Documents with Web Templates Summary This article explains certain ways to link documents with our Web-Templates which is a useful way of attaching information with a query. When the enduser runs
More informationUsing Radio Buttons in Web Template
Using Radio Buttons in Web Template Applies to: SAP BW 3.5. For more information, visit the Business Intelligence homepage. Summary One of the ideal requirements in the BW Web Reporting is the user wants
More informationData Source Replication and Activation of Transfer Structures
Data Source Replication and Activation of Transfer Structures Applies to: SAP Net Weaver BW. For more information, visit the EDW homepage Summary Detailed Documentation and practical implementation of
More informationReading Enhanced DataSource fields for the Remote Cube
Reading Enhanced DataSource fields for the Remote Cube Applies to: SAP BI 7.0. For more information, visit the EDW homepage. Summary SAP Remote Cube does not display the enhanced fields in the data source.
More informationSDN Community Contribution
SDN Community Contribution (This is not an official SAP document.) Disclaimer & Liability Notice This document may discuss sample coding or other information that does not include SAP official interfaces
More informationEasy Lookup in Process Integration 7.1
Easy Lookup in Process Integration 7.1 Applies to: SAP NetWeaver Process Integration 7.1 For more information, visit the SOA Management homepage. Summary Unlike previous version of PI (7.0) / XI (3.0,
More informationChanging the Source System Assignments in SAP BW Objects without Affecting the Data Modeling
Changing the Source System Assignments in SAP BW Objects without Affecting the Data Modeling Applies to: SAP ECC 6.00 and SAP BW 7.0 releases. For more information, visit the Business Intelligence homepage.
More informationSteps to Activate ALE Delta for Custom Master Datasource Created on ZTable
Steps to Activate ALE Delta for Custom Master Datasource Created on ZTable Applies to: This article applies to SAP BI 7.0 and SAP BW 3.X. For more information visit EDW Homepage. Summary This article explains
More informationLoading the Data for Time Dependent Hierarchy in SAP BI
Loading the Data for Time Dependent Hierarchy in SAP BI Applies to: Time dependent hierarchies are often used by organizations to help them organize their master data which changes like employee hierarchies,
More informationPositioning of CML of SAP s LSA with NLS SAND as Archiving Technology
Positioning of CML of SAP s LSA with NLS SAND as Archiving Technology Applies to EDW, SAP BIW 3.5, SAP NetWeaver 7.0. For more information, visit the EDW homepage. Summary This document may help you in
More informationStep by Step Method for File Archival in BW
Step by Step Method for File Archival in BW Applies to: SAP BW 3.x & SAP BI Net Weaver 2004s. For more information, visit the EDW homepage. Summary This document will give the reader step by step approach
More informationPerformance Tuning in SAP BI 7.0
Applies to: SAP Net Weaver BW. For more information, visit the EDW homepage. Summary Detailed description of performance tuning at the back end level and front end level with example Author: Adlin Sundararaj
More informationIntegration of Web Dynpro for ABAP Application in Microsoft Share Point Portal
Integration of Web Dynpro for ABAP Application in Microsoft Share Point Portal Applies to: Web Dynpro ABAP. Summary This tutorial explains how to display Web Dynpro ABAP Application in Microsoft Share
More informationStep by Step Guide How to Use BI Queries in Visual Composer
Step by Step Guide How to Use BI Queries in Visual Composer Applies to: SAP BW 7.x. For more information, visit the EBW homepage. Summary The objective of this Article is to explain step by step guide
More informationAll about Compression
Applies to: SAP BI 7.0 developers and Reporting Users. For more information, visit the EDW homepage. Summary This document will help to understand almost all aspects related to compression, advantages
More informationMaterial Master Archiving in Simple Method
Material Master Archiving in Simple Method Applies to: This article is applicable for SAP MM Module of SAP Version SAP 4.7 till SAP ECC 6.0 Summary This article describes a process called Material Master
More informationecatt Part 6 System Data Container
\ ecatt Part 6 System Data Container Applies to: SAP 5.0 Summary In the Part I of ecatt series, we covered the introduction to ecatt, its prerequisites, features, when to go for SAP GUI mode recording
More informationSteps for Implementation of Standard Data Store Object (DSO) for Purchase Cube in SAP BI 7.0
Steps for Implementation of Standard Data Store Object (DSO) for Purchase Cube in SAP BI 7.0 Applies to: SAP BI 7.0 Also works on SAP BW 3.5.For more information, visit the Business Intelligence Homepage.
More informationAnalysis Process Designer (APD) Step by Step Business Intelligence
Analysis Process Designer (APD) Step by Step Business Intelligence Applies to: This article applies to SAP_BW 350 and SAP_BW 700 with highest support package SAPKW70017. For more information, visit the
More informationPOWL: Infoset Generation with Web Dynpro ABAP
POWL: Infoset Generation with Web Dynpro ABAP Applies to: WebDynpro ABAP Developer. For more information, visit the Web Dynpro ABAP homepage. Summary: This document explains how to create an Infoset, generate
More informationData Mining: Scoring (Linear Regression)
Data Mining: Scoring (Linear Regression) Applies to: SAP BI 7.0. For more information, visit the EDW Homepage Summary This article deals with Data Mining and it explains the classification method Scoring
More informationDeveloping Crystal Reports on SAP BW
Developing Crystal Reports on SAP BW Applies to: SAP BusinessObjects Crystal Reports. Summary This white paper explores various methods of accessing SAP BW data through Crystal Reports. Author: Arka Roy
More informationCreation of Key Figures with Higher Decimal Place Precision
Creation of Key Figures with Higher Decimal Place Precision Applies to: SAP Business Intelligence 7.0. Summary The objective of this Document is to explain how to Create Key figures with higher number
More informationSAP BW Copy Existing DTP for Data Targets
SAP BW Copy Existing DTP for Data Targets Applies to: SAP BI Consultants with ABAP Knowledge. For more information, visit the EDW HomePage. Summary Copy existing DTP to a new one in not possible in SAP
More informationLoad Info Cube in SCM 5.0 (BI 7.0)
Applies to: SCM 5.0 For more information, visit the Business Intelligence homepage. Summary The article illustrates the steps to load an info cube in SCM 5.0 Author: Bijal Parmar Company: Larsen & Toubro
More informationData Flow During Different Update Mode in LO Cockpit
Data Flow During Different Update Mode in LO Cockpit Applies to: SAP BW 3.x & SAP BI NetWeaver 2004s. For more information, visit the Business Intelligence homepage. Summary The objective of this Article
More informationDB Partitioning & Compression
Applies to: SAP BI 7, SQL Server 2005. For more information, visit the Business Intelligence homepage. Summary The purpose of this document is to outline a strategy for DB partitioning and compression
More informationReplacement Path: Explained with an Illustrated Example
Replacement Path: Explained with an Illustrated Example Applies to: SAP NetWeaver BW. For more information, visit the EDW homepage Summary The document explains the purpose and implementation method of
More informationHow to Display Result Row in One Line While Reporting On Multiproviderer
How to Display Result Row in One Line While Reporting On Multiproviderer Applies to: SAP BW 3.x, BI 7.0 developers and Reporting Users. For more information, visit the Business Intelligence home page Summary
More informationDatabase Statistics During ODS Activation
Database Statistics During ODS Activation Applies to: SAP BW (3.5) / SAP BI (7.0). For more information, visit the EDW homepage Summary ODS Activation step periodically recalculates the statistics. This
More informationHow to Check BW system Before Go-Live
How to Check BW system Before Go-Live Applies to: SAP Net Weaver BW 7.0. For more information, visit the EDW homepage Summary Detailed description on how & what to check SAP BW system Before Go-Live Author:
More informationHow to Create and Schedule Publications from Crystal Reports
How to Create and Schedule Publications from Crystal Reports Applies to: SAP BusinessObjects Enterprise. For more information, visit the Business Objects homepage. Summary This white paper describes how
More informationSAP BusinessObjects Translation Manager Functionality and Use
SAP BusinessObjects Translation Manager Functionality and Use Applies to: SAP BusinessObjects Enterprise XI 3.0, SAP BusinessObjects Enterprise XI 3.1 all support packs. For more information, visit SAP
More informationSetting up Connection between BW and R/3 for Data Load
Setting up Connection between BW and R/3 for Data Load Applies to: SAP BI 7.0. For more information, visit the Business Intelligence homepage. Summary This document guides to establish connection between
More informationProcess Chain Log Deletion
Applies to: SAP BW 3.x & SAP BI Net Weaver 2004s. For more information, visit the EDW homepage Summary Process chains are used in BW landscape to automate the loading sequence. There are multiple process
More informationServer Connectivity and Data Load from Non SAP System to BW
Server Connectivity and Data Load from Non SAP System to BW Applies to: SAP NetWeaver 2004 and SAP NetWeaver 2004s. BW 3.5 & BI 7.0 For more information, visit the Business Intelligence homepage. Summary
More informationMaintaining Roles and Authorizations in BI7.0 - RSECADMIN
Maintaining Roles and Authorizations in BI7.0 - RSECADMIN Applies to: SAP Business Intelligence 7.0. For more information, visit the Business Intelligence homepage. Summary This paper will take you through
More informationRecreating BIA Indexes to Address the Growth of Fact Index Table
Recreating BIA Indexes to Address the Growth of Fact Index Table Applies to: Software Component: SAP_BW.Release: 700 BIA version: 53 Summary In this article we would learn the application of recreating
More informationTriggering the Process Chains at Particular Date using Events
Triggering the Process Chains at Particular Date using Events Applies to: SAP BW 3.5, Will also work on SAP BI 7 For more information, visit the Business Intelligence homepage Summary This document discusses
More informationThis article explains the steps to create a Move-in letter using Print Workbench and SAPScripts.
Applies to: SAP IS-Utilities 4.6 and above. Summary This article explains the steps to create a Move-in letter using Print Workbench and SAPScripts. Author: Company: Hiral M Dedhia L & T Infotech Ltd.
More informationExtraction of Hierarchy into Flat File from R/3 and Loading in BW System
Extraction of Hierarchy into Flat File from R/3 and Loading in BW System Applies to: This article applies to SAP R/3 (any version) and SAP B/W (any version).for more information, visit the Business Intelligence
More informationStep by Step Guide on How to Use Cell Definition in BEx Query
Step by Step Guide on How to Use Cell Definition in BEx Query Applies to: SAP BI 7.0. For more information, visit the EDW homepage. Summary This article explains the functionalities of Cell Definition
More informationMDM Import Manager - Taxonomy Data (Attribute Text Values) Part 3
MDM Import Manager - Taxonomy Data (Attribute Text Values) Part 3 Applies to: SAP NetWeaver Master Data Management (MDM) SP3, SP4, SP5. Summary This article provides a step-by-step procedure for manually
More informationMDM Syndicator: Custom Items Tab
MDM Syndicator: Custom Items Tab Applies to: SAP NetWeaver Master Data Management (MDM) SP04, SP05 and SP06. For more information, visit the Master Data Management homepage. Summary This article provides
More informationPerformance Management in Data Loading: an Overview
Performance Management in Data Loading: an Overview Applies to: SAP BI 7.0 / SAP Net weaver 2004s (Support package 14-17). For more information, visit the EDW homepage. Summary This documents talks about
More informationHow to Broadcast BEx Workbooks using BW Pre-calculation Server and through Process Chains
How to Broadcast BEx Workbooks using BW Pre-calculation Server and through Process Chains Applies to: SAP BI/BW 3.5 and above. For more information, visit the EDW homepage Summary The document will demonstrate
More informationHow to Create Top of List and End of List of the ALV Output in Web Dynpro for ABAP
How to Create Top of List and End of List of the ALV Output in Web Dynpro for ABAP Applies to: SAP Netweaver 2004S: Web Dynpro for ABAP. For more information, visit the User Interface Technology homepage.
More informationPlanning Functions and Characteristic Relationship in Integrated Planning
Planning Functions and Characteristic Relationship in Integrated Planning Applies to: SAP BI 7.0 developers and Reporting Users. For more information, visit the EDW homepage Summary This document explains
More informationDeploying BusinessObjects Explorer on Top of a SAP BI Query
Deploying BusinessObjects Explorer on Top of a SAP BI Query Applies to: SAP BI NetWeaver 2004s, BusinessObjects Explorer 3.1. For more information, visit the Business Intelligence homepage. Summary The
More informationRole and Scope of ABAP in SAP BI
Role and Scope of ABAP in SAP BI Applies to: SAP NetWeaver BW. For more information, visit the EDW homepage Summary The document provides a detailed description of the usage of APAP in SAP BI. Author:
More informationCut Over Activities Specific for LIS* Data Sources
Cut Over Activities Specific for LIS* Data Sources Applies to: SAP BW 3.5/SAP BI 7.0. For more information visit the Enterprise Data Warehousing Homepage Summary The basic purpose of this document is to
More informationSAP Net Weaver 400s BI 7.0For more information, visit the Business Intelligence homepage.
Applies to: SAP Net Weaver 400s BI 7.0For more information, visit the Business Intelligence homepage. Summary This paper provides the step by step procedure on how to archive data in ODS/InfoCube using
More informationUsing Nested Exception Aggregation in BEx Reports- Scenario
Using Nested Exception Aggregation in BEx Reports- Scenario Applies to: SAP BW 3.x & SAP BI Net Weaver 2004s. For more information, visit the Business Intelligence homepage. Summary The Objective of this
More informationAbout ITAB Duplicate_Key (SAP lrsaods) Runtime Error
About ITAB Duplicate_Key (SAP lrsaods) Runtime Error Applies to: SAP NetWeaver BW 3.x.For more information, visit the Business Intelligence homepage. Summary This article explains about the Runtime Error
More informationSolution to the Challenges in Pivoting
Solution to the Challenges in Pivoting Applies to: SAP NetWeaver 2004s/ MDM 5.5 SP 06. For more information, visit the Master Data Management homepage. Summary This article strives to describe the different
More informationData Mining: Decision Trees
Applies to: SAP BI 7.0. For more information, visit the EDW homepage Summary This article about the Data Mining and the Data Mining methods provided by SAP in brief. It explains the classification method
More informationSAP QM-IDI Interface. SDN Contribution. Applies to: Summary. Author Bio. SAP QM Interfaces
SDN Contribution SAP QM-IDI Interface Applies to: SAP QM Interfaces Summary A description of the steps needed to activate a communication between Quality management and an external system using the QM-IDI
More informationAdd /Remove Links on ESS Home Page in Business Package 1.5
Add /Remove Links on ESS Home Page in Business Package 1.5 Applies to: SAP ECC EHP5. For more information, visit the Enterprise Resource Planning homepage. Summary Customizing links on ESS Overview page
More informationGraphical Mapping Technique in SAP NetWeaver Process Integration
Graphical Mapping Technique in SAP NetWeaver Process Integration Applies to: SAP NetWeaver XI/PI mappings. For more information, visit the Repository-based Modeling and Design homepage. Summary This guide
More informationDisplaying SAP Transaction as Internet Application in Portal
Displaying SAP Transaction as Internet Application in Portal Summary This article explains how we can display SAP transaction as Internet Application Components (IAC) in portal to make it simpler for the
More informationHow to Work with F4 Input Help Effectively in BEX
How to Work with F4 Input Help Effectively in BEX Applies to: SAP BI 7.0 developers and Reporting Users. For more information, visit the Business Intelligence home page Summary This document helps to overcome
More informationPurpose of Goods Receipt Message indicator in Purchase Orders
Purpose of Goods Receipt Message indicator in Purchase Orders Applies to: This article is applicable for SAP MM Module of SAP for version SAP 4.7 till SAP ECC 6.O. For more information, visit the Supply
More informationABAP Code - Recipients (Specific Format) SAP BW Process Chain
ABAP Code - Email Recipients (Specific Format) SAP BW Process Chain Applies to: This article is applicable to all the SAP BI consultants who are accustomed with SAP ABAP skills. For more information, visit
More informationCustomized Transaction to Trigger Process Chain from Failed Step
Customized Transaction to Trigger Process Chain from Failed Step Applies to: SAP BW 3.x & SAP BI NetWeaver 2004s. For more information, visit the Business Intelligence homepage. Summary There are multiple
More informationBI Inventory Management- Data Loading
BI Inventory Management- Data Loading Applies to: ECC 6.0 and SAP BI 7.0 system. For more information, visit the Business Intelligence homepage. Summary The paper is about what all steps to be followed
More informationProcedure to Trigger Events in Remote System Using an ABAP Program
Procedure to Trigger Events in Remote System Using an ABAP Program Applies to: SAP BW 3.x, SAP BI 7.x, SAP ECC, APO Systems. Summary This document gives the procedure to trigger events in a Remote System
More informationSAP BI Analysis Authorization (Customer Exit Variables)
SAP BI Analysis Authorization (Customer Exit Variables) Applies to: SAP BI 7.0/BW 3.5 consultants. For more information, visit EDW Homepage. Summary Use analysis authorization for authorization relevant
More informationMaterial Listing and Exclusion
Material Listing and Exclusion Applies to: Applies to ECC 6.0. For more information, visit the Enterprise Resource Planning homepage Summary This document briefly explains how to restrict customers from
More informationStep by Step Guide to Enhance a Data Source
Step by Step Guide to Enhance a Data Source Applies to: SAP BI 7.0. For more information, visit the Business Intelligence homepage Summary This article provides a step by step guide to enhance a Standard
More informationValidity Table in SAP BW/BI
Applies to: Applicable for SAP BI 3.x and above Summary To maintain the cubes non cumulative Key figures. Author: Om Ambulker Company: Cognizant, Pune Created on: 15 July 2011 Author Bio Om Ambulker is
More informationCreating Custom SU01 Transaction Code with Display and Password Reset Buttons
Creating Custom SU01 Transaction Code with Display and Password Reset Buttons Applies to: All versions of SAP. Summary This article will explain you the process of creating custom SU01 transaction code
More informationStep by Step Guide for PI Server Start and Stop Procedure
Step by Step Guide for PI Server Start and Stop Procedure Applies to: This document applies to PI 7.0 and 7.1 and above. For more information, visit the Application Management homepage. Summary This document
More informationWeb Dynpro: Coloring Table Conditionally
Web Dynpro: Coloring Table Conditionally Applies to: SAP ECC 6.0. For more information, visit the Web Dynpro ABAP homepage. Summary This article is designed for the beginners in Web Dynpro who have ABAP
More informationHow to Default Variant Created for Report Developed In Report Painter/Writer
How to Default Variant Created for Report Developed In Report Painter/Writer Applies to: Any business organization having reports developed using Report Painter/Report Writer. This is applicable from R/3
More informationData Inconsistency in the Cube and Aggregate
Data Inconsistency in the Cube and Aggregate Applies to: SAP BW 3.5 & BI 7.0. For more information, visit the Business Intelligence homepage. Summary: A query, which reads data from aggregates, sometimes
More informationUsing Rule Group in SAP-BI. Part - 1
Applies to: SAP BW 7.X. Summary This article gives clear picture about how to use Rule Group (s) using Rule Type Routine in SAP-BI. Author: Surendra Kumar Reddy Koduru Company: ITC Infotech India Ltd.
More informationDownload SAP Query Output to Local/ Network Folders in Background
Download SAP Query Output to Local/ Network Folders in Background Applies to: SAP release where SQUE0001 enhancement (SMOD) available For more information, visit the ABAP homepage. Summary This article
More informationList of Values in BusinessObjects Web Intelligence Prompts
List of Values in BusinessObjects Web Intelligence Prompts Applies to: This solution is implemented for a combination of SAP NW BI 7.0 and SAP BO XI 3.1. For more information visit Business Objects Home
More informationInformation Broadcasting Part 3 Scheduling the First Report
Information Broadcasting Part 3 Scheduling the First Report Applies to: SAP BW 3.5 Summary This is part-3 article in the Information broadcasting (IB) series. Some things have already been discussed like
More informationHierarchy in Business Objects with Expanded Hierarchy Logic
Hierarchy in Business Objects with Expanded Hierarchy Logic Applies to: SAP BW BO Integration Summary The current article talks about ways and means of achieving an expanded hierarchy view in the BO reports
More informationReporting Duplicate Entries
Applies to: SAP BI 7.0 and above. For more information, visit the Business Intelligence Homepage. Summary It is a common reporting requirement to display duplicate entries based on a characteristic. This
More informationReporting on Special Stock Values: Snap-shot/Detailed
Reporting on Special Stock Values: Snap-shot/Detailed Applies to: Business Warehouse, for versions 3.0B and above. For more information, visit the EDW homepage. Summary The paper titled presents an alternative
More informationABAP Code - Read SAP BW Infoprovider (Infocube, DSO, Multiprovider) Data using ABAP Code
ABAP Code - Read SAP BW Infoprovider (Infocube, DSO, Multiprovider) Data using ABAP Code Applies to: This article is applicable to all the SAP BI 7.0 consultants who are accustomed with SAP ABAP skills.
More information