5U CWDM Managed Platform SML-5000

Transcription

1 CWDM Managed Platform 5U CWDM Managed Platform 5000 The SigmaLinks5000 is a flexible, cost-effective optical transport system, designed to multiplex, de-multiplex and switch high-speed data for storage, video and voice applications. The 5000 is housed in a 5U, 19" or 23" rack mountable transport platform for ITU G compliant CWDM applications, which features 17 universal hot-swappable module slots. Currently supported module line cards include SNMP, s,, OADM and Optical protection. The 5000 supports optional redundant power and SNMP management. Another unique feature of the 5000 is a line card design which may be transformed into stand-alone units. The use of a common PCB card which may either be placed in the rack or used as a stand-alone unit reduces manufacturing costs as well as the inventory of spares required by distributors, installers, and end users. The (Network Management System) option includes an SNMP card (agent) and standard MIB file for importation and compilation into network management platforms such as HP OpenView or CA Unicenter. This allows remote configuration and system monitoring via industry standard network management software. 5U 19 (23) chassis accommodate up to 17 card modules All modules are hot-swappable Redundant AC, DC power and cooling fans Chassis cascade up to 6 with one IP management sensors constantly monitor internal environment LCD status indication with keypad control TFTP firmware upgrade Supports Console, Telnet, SNMP and Web management Alarm Relay contacts Up to 8 CWDM wavelengths in compliance with ITU G Connectors Console port features an RS232 (DB9) connector, Alarm : Terminal Block Physical Specifications : 440 x 250 x 220mm (W x D x H) : 9.5kg w/o P/S Power Characteristics AC input: 100 ~ 240V AC DC input: 24VDC, 48VDC, 72VDC Environmental Specifications Operating 0 C to 50 C -10 C to 70 C Relative humidity 5% to 90% non-condensing Predicted : 65,000 hrs (25 C) FCC class A, VCCI class A, CE, RoHS SigmaLinks 5000 Major Components Control Card with LCD menu operation For power, temperature monitoring and local control AC Power Module Hot swappable 90~264VAC DC Power Module Hot swappable18~74vdc Hot swappable Line Cards: Mux/Demux Optical line Protection Optical Add/Drop Mux (OADM) SNMP Field replaceable Intelligent Fan 5RU 19' or 23" rack mountable Main Chassis Chassis cascade up to ID5 Alarm relay

2 CWDM Managed Platform Control card with LCD Menu Operation This hot-swappable controller serves two basic and very important functions; It provides a local human interface for monitoring/provisioning the SML5000 and it provides a communication link to the SNMP card that supports remote management via Telnet, Web or SNMP. The local maintenance interface can employ a serial "dumb" Power Redundancy SML5000 chassis power supplies are hot swappable and modular, installing two into a chassis provides redundancy should a single power supply fail. 1 Fiber Series Intelligent Cooling Fan To further increase system reliability, the SML5000 chassis is fitted with one fan module, incorporating five cooling fans, fixed on the rear of the chassis. The cooling fans may be manually controlled or programmed to start whenever the internal environmental temperature exceeds 40C. Chassis cascade The SML5000 features cascadeable management which allows managing a stack (up to 6 chassis) from a single IP address. Chassis are interconnected with standard UTP cables that carry control signals. Each chassis has its own ID, starting with the master chassis ID0 and cascading up to ID5. Network Management The SML5000 chassis provides an SNMP card which can be installed into any slot of chassis. The SNMP card allows a network administrator with the ability to configure and monitor the status of the blades. Management can be achieved locally over RS232, or over the network by Telnet, Web or SNMP Protocol Supported The SML5000 chassis allows network administrators to deploy the chassis in a wide range of network. Technologies supported by the chassis included, Mux/Demux, Optical line Protection and Optical Add/Drop Mux (OADM) CWDM 8-Service over a dual strand fiber WDM specific wavelengths SML2000 SML5000 SML Chassis type Chassis: 5U 17-Slot chassis AC : 100~240V DC24 : 18~36V DC48 : 36~72V Example: 50-Chassis

3 Management SML Series Network Management Controller SNMP The SNMP is the Network Management Controller card that can be placed in a compatible SML2000 or SML5000 chassis to provide network management functions. The management interface supports a local RS-232 serial console or remote TCPIP management by Telnet, HTTP or SNMP protocols. The card is designed to be hot swapped so that it may be field replaced without affecting any online service of any other rack cards. The card also supports online firmware upgrade from TFTP server, using any user interface. Support for any standard is provided by the included proprietary MIB file. Communicated with CWDM Control Card by RS-485 Management control to Mux/Demux card, Protection card and Card SNMP v1 Trap, MIB file 3 ports 10/100TX UTP ports plus 2 x100mbps SFP slot Telnet access control Real-Time Clock feature TFTP SNMP F/W upgrade In chassis cascade mode, only chassis #0 SNMP card works, the other Chassis #1 to #5 SNMP cards are idle. Electrical Interface Management Interface Indications Console RS232 port 3x LAN 10/100Base-TX 2 x 100Base-FX SFP slot SNMP management: provide all system for Network management functions: software updates, and management system interaction through Ethernet port Out-band management: supports Web, Telnet and SNMP management PWR, LAN LNK/SPD 220 x 162 x 25mm (DxWxH) 0 ~ 50 C (Operating) -10 ~ 60 C () 10 ~90% non-condensing CE, FCC, LVD, RoHS 65,000 hrs (25 C) Web GUI Manager Console / Telnet Management Optional card 1-69 SNMP 50-SNMP : SML5000 SNMP card 20-SNMP : SML2000 SNMP card Example: 50-SNMP

4 Preliminary CWDM 10G 3R 10G 1 Fiber Series The 10G is a series of managed 10G fiber to fiber 3R repeater and transponders. Based on a number of 10 Gigabit Fiber standards, these transponders support XFP to XFP (XX), SFP+ to XFP (SX), or SFP+ to SFP+ (SS) fiber connections. The transponders are protocol transparent, providing 3R (Re-amplification, Re-shaping and Re-clocking) regeneration between these different optical module types. One of the major applications for this converter is in connecting proprietary transceiver equipment to CWDM or DWDM when these 'colored' optical modules are not available for the proprietary equipment. With full duplex wire speed forwarding capability between the 2 fiber media, the 10G brings you the best and simplest solution for your 10G conversion between fiber and fiber. Multiple protocol supported 10G Ethernet, 10G FC, STM-64, OC-192 Network management via Web, Telnet, SNMP in central 5000/ 2000 chassis Protocol transparent 3R fiber media transponder / repeater (Re-amplification, Re-shaping and Re-clocking) Promotes flexibility and eases management with pluggable SFP+ or XFP transceiver two 10G ports offering multiservice 10G transponder and regenerator function Provides superior optics capabilities resulting in extended transport distances for regional application. Extend 10G Ethernet transmission over fiber Useful as a '' in CWDM or DWDM systems for 10G Ethernet/Fiber Channel/STM-64 Supports Client / Line loop back tests Optical Interface Indications Connector Traffic Format OC-192/STM-64 Regeneration Re-amplification Loopback Cable type Wavelength LED (Power, Line Link, Client Link, Test, Loop back, Port Active, Alarm) <18W 220 x 162 x 25mm ( D x W x H) 0 ~ 50 C (Operating), -10 ~ 70 C () 10 ~90% non-condensing CE, FCC, LVD, RoHS 75,000 hrs (25 C) 10G-SS LC, 1x Line SFP to 1x Client SFP+ 10G-XX LC, 1x Line XFP to 1x Client XFP 10GSX LC, 1x Line SFP+ to 1x Client XFP 10 Gigabit Ethernet LAN 10G FC ( G) OTN G.709; OTU2 ( G) Re-shaping Re-timing Line / Client SM 9/125um CWDM 1470 ~ 1610nm DWDM ~ nm Managed 10G 3R 2100 STM-64 OC-192 STM-64 OC G STM-64 OC192 10G 10G 3R Repeater 1550nm 120km 120km 120km 1550nm 10G 10G Example: 10G 10G 1-70

5 CWDM Preliminary 2.7G 3R 2.7G The 2.7G is an 2.7G 3R optical regeneration device, which consists of Re-amplification, Re-shaping and Re-timing. The transponder card converts a data signal to the correct wavelength for transmission on a specific channel by supporting SFP optics on both line side and client side interfaces. When the 2.7G card is placed in the SML rack with SNMP management, the management can view the converter card's status, type, version, fiber link status and alarms. The card can be configured to enable or disable the port, reset the port and set the desired data rate. Multiple protocol supported at bit rates 28Mbps to 2.7Gbps (Fast Ethernet, Gigabit Ethernet, OC-3, OC-6, OC-12, OC-24, OC-48, STM-1, STM-4 STM-16, FC-1, FC-2) Network management via Web, Telnet, SNMP in central 5000/ 2000 chassis Local configuration via DB9 craft port In Stand-alone Digital Diagnostic monitoring of SFP module Perform optical repeater function (Re-amplification, Re-shaping, and Re-clocking) Facility loopback on both Client / Line sides Link Fault Pass through (LFP) Auto Laser Shutdown (ALS) Dip Switch setting data rate Detect fiber transmitter error Alarm Optical Interface Standard Indications Power Input Dimension Connector Data rate Duplex mode Full duplex Fiber Distance Wavelength IEEE 802.3, IEEE 802.3u LED (PWR, Line Link, Client Link, Test, Loop back, Port Active, Alarm) Card : 12VDC Standalone : AC, DC options < 10W 220 x 162 x 25mm (D x W x H) 0 ~ 50 C (Operating), -10 ~ 70 C () 10 ~ 90% non-condensing CE, FCC, LVD, RoHS 65,000 hrs (25 C) SFP LC 28M to 2.7Gbps MM 50/125μm, 62.5/125μm. SM 9/125μm MM 2km, SM 15/30/50/80/120km, WDM 20/40/60/80km MM 1310nm, SM 1310,1550nm WDM 1310Tx/1550Rx (type A) 1550Tx/1310Rx (type B) CWDM 1470 ~ 1610nm Managed 2.7G 3R G 2.7G STM-16 OC-48 STM-16 OC-48 STM-16 OC G 3R Repeater 2.7G 1550nm 120km 120km 120km 1550nm 2.7G 2.7G Example: 2.7G G

6 The transponder card converts a data signal to the correct wavelength for transmission on a specific CWDM channel. By supporting SFP optics on both line side and client side interfaces, the transponder provides a truly flexible and easy to deploy solution for all applications. The transponder supports 2R regeneration, which consists of re-amplification and reshaping. 2R regeneration (Re-amplification and reshaping) Line rate support from 100Mbps up to 2.5Gbps Client Side Wavelengths: 851/ 1311/ 1551nm Line Side CWDM Wavelengths: 1471/ 1491/ 1511/ 1531 / 1551/ 1571/ 1591/ 1611nm Optical Connector: SFP-LC ( On both Line & Client Side) CWDM Dual Channel 1.25G/2.5G TR12 TR22 Optical Interface : Indication Power Input Connector : SFP LC Data rate : 100Mbps, 1.25Gbps, 2.5Gbps Fiber : MM 62.2/125μm, 50/125μm. Distance : SM 9/125μm Wavelength : 850, 1311, 1471 ~ 1611nm Power, Link(Line), Link(Client), TX/Act, Loopback 12 VDC 1channel <5W, 2 channel <10W 220 x 162 x 25mm(D x W x H) 0~50 C (Operating),0~70 C () 10~90% non-condensing CE, FCC, RoHS 57,000 hours 1 Fiber Series CWDM 2-Service over dual fiber with Protection ADSL G.Shdsl FXS/ FXO DLC SAN IP-SAN Primary line Secondary line DLC SAN IP-SAN ADSL G.Shdsl FXS/ FXO TR12 : 2 ch 1.25G TR22 : 2 ch 2.5G Example: TR12 TR

7 CWDM Protection Optical Line Protection Protection An optical protection unit is able to provide fiber path redundancy on a channel by channel basis. These units are particularly well suited for protection in fiber data transmission. The solution includes monitoring capabilities for both working and protection paths. The monitoring is available through the SNMP Management unit. In case of a fiber cut in the protecting path, traffic will be switched over to the protecting path in less than 50 ms. 1+1 full optical protection Low channel cross talk < -55dB ; Low insertion loss < 6.5dB Latch feature, if power is lost the switch remains in its current state Protection transition < 50 ms Works with any combination of 1 ~16 wavelengths Traffic is switched in one of three modes : Auto, Semi-Auto, Manual Optical Interface Type : LC connectors Working and protected lines are physically separated fiber Connecter LEDs Power Restoration Time Range Loss (D x W x H)mm LC Power System, Working Path, Protection Path, Work mode DC 12V In 50ms Input PWR :+3 ~ -15dBm(TX), -2~-29dBm(RX). Detection: -5 ~ -29dBm Insertion Loss < 6.5dB, Return Loss > 45dB <10W 220 x 162 x 25mm 0~50 C (Operating),20~70 C () 10~90% non-condensing CE, FCC, RoHS 57,000 hours CWDM 2-Service over dual fiber with Protection ADSL G.Shdsl FXS/ FXO DLC SAN IP-SAN Protection 1+1 fiber DLC SAN IP-SAN ADSL G.Shdsl FXS/ FXO Protection : Fiber Protection card Example: Protection 1-73 Protection

8 CWDM MUX/DeMUX 9 and 5 Channel MUX/ DeMUX MD 1 Fiber Series Optical Mux/Demux (Multiplexer/Demultiplexer) cards are available in 5-channel or 9-channel models and are used to combine signals from 1-channel or 2-channel transponder cards on to a single pair of fiber. A 1311nm CWDM channel is accessible separately. The MUX/DEMUX cards provide the primary wave division and combination functions. Line side wave lengths require translation to client side equipment via the transponder card. Two different CWDM are available: 5 Ch (1531/1551/1571/1591/ nm) 9 Ch (1471/1491/1511/1531/1551/1571/1591/ nm) Full native mode performance Optical connectors: LC connectors, SMF 9/ 125mm Optical input/ output monitoring port Passive model requires no power Protocol transparent, no limitation Utilizes industry standard ITU CWDM wavelengths Connecter Standard Wavelength Insertion Loss Return Loss LC ITU-T G MD , 1471, 1491, 1511, 1531, 1551, 1571, 1591, 1611nm MD , 1551, 1571, 1591, 1611nm MD90 < 3.5dB for CWDM wavelength MD50 < 5.0dB for CWDM wavelength > 45dB 220 x 162 x 25mm(DxWxH) 0~50 C (Operating),-10~70 C () 10~90% non-condensing CE, FCC, RoHS 57,000 hours CWDM Mux/DeMux Service SML2000 SML5000 SML2000 MD91 MD51 Example: MD91 MD 1-74

9 CWDM OADM Optical Add-Drop Multiplexer OADM An Optical Add/Drop Multiplexer takes a single wavelength from a trunk, pulls the signal out, and allows a new signal at the same wavelength to be inserted into the trunk at roughly the same spot. All the other wavelengths pass through the Add/Drop Multiplexer with only a small loss of power (usually < 0.5dB including connectors and adapters). An Optical Add/Drop Multiplexer (OADM) is available allowing a single wavelength to be dropped or added at specific sites in linear Add/Drop topology. Connecter Indication Power Input Restoration Time Range Loss LC Power System, Working Path, Protection Path, Work mode 12VDC 50ms Input PWR :+3 ~ -15dBm(TX), -2~-29dBm(RX). Detection: -5 ~ -29dBm Insertion Loss < 6.5dB, Return Loss > 45dB <10W 220 x 162 x 25mm(DxWxH) Single Add/Drop Channel Operating channel : 1311,1471,1491,1511,1531,1551,1571, 1591,1611nm Passive optical module, no power required Protocol transparent, no limitation Utilizes Industry standard ITU CWDM wavelengths Optical connectors : LC 0~50 C (Operating),-10~70 C () 10~90% non-condensing CE, FCC, RoHS 57,000 hours CWDM Add Drop Multiplexer OADM SML5000 Drop ADD SML5000 Gigabit Ethernet STM-4 OADM Example: OADM 1-75 OADM