Actual4Test. Actual4test - actual test exam dumps-pass for IT exams

Transcription

1 Actual4Test Actual4test - actual test exam dumps-pass for IT exams

2 Exam : DSDSC-200 Title : Dell SC Series Storage Professional Exam Vendor : Dell Version : DEMO Get Latest & Valid DSDSC-200 Exam's Question and Answers 1 from Actual4test.com. 1

3 NO.1 An administrator has multiple servers that need to be connected to the Storage Center through two iscsi networks. The engineer uses a software iscsi initiator on the servers. The Storage Center runs in Virtual Port mode. What item(s) must the administrator know to connect the hosts to the? Storage Center? A. Management IP address B. Virtual port IP addresses C. iscsi Initiator Name D. Control port IP addresses Answer: D NO.2 Flex ports are enabled to add redundant paths for existing iscsi hosts. A new VLAN is created with identical settings. The network administrator reports high retransmits on all newly added paths. Winch best practice configuration is missing? A. Configure a QoS node to optimize performance B. Adjust the MTU value on the Flex Port Fault Domain C. Install Flex port license D. Change the MAN ID from the default of 3260 Answer: B NO.3 An engineer is configuring a storage array in a mixed environment of 10 Gb iscsi and 16 Gb Fibre Channel. The 10 Gb iscsi network consists of two separate VLANs and is used for server connectivity. The 16 Gb Fibre Channel network consists of a single fabric and is used to provide high-speed replication connectivity to a secondary storage array for Synchronous Live Volume with Auto Failover. How many fault domains must the engineer configure on the storage array for each network? A. One fault domain for iscsi and two fault domains for Fibre Channel B. One fault domain for Fibre Channel and one fault domain for iscsi C. Two fault domains for iscsi and one fault domain for Fibre Channel D. Two fault domains for Fibre Channel and two fault domains for iscsi Answer: C NO.4 An engineer maps a volume to the Windows 2012 R2 server and scans for disks within the Windows Disk Management Console. The engineer sees multiple instances of the mapped volume the operating system was recently installed on the server that is experiencing the problem. No additional features have been added. Which three steps should the engineer take within Windows to fix the problem? (Choose three.) A. add the "Multipath I/O' server Feature B. add the Storage Center specific hardware ID within Windows MPIO C. choose the disk object with the lowest disk number and delete the rest D. make sure that the iscsi Initiator service runs on the server E. reboot the server after making the correct configuration changes Get Latest & Valid DSDSC-200 Exam's Question and Answers 2 from Actual4test.com. 2

4 Answer: A,B,E NO.5 A customer has a newly installed storage array. The customer needs to proactively monitor and report storage utilization on a regular basis. Which customizable, proactive tool should be configured to perform this task? A. Enterprise Manager Threshold Alerting B. Dell SupportAssist C. Storage Center Event Monitoring D. Enterprise Manager Automated Reporting Answer: A NO.6 Refer to the exhibit. A pagepool has 7.3 TB of allocated space; 4.2 TB of that space is being used by volumes. Tier 3 RAID 6-6 Standard is currently 76% utilized. What happens when Tier 3 RAID 6-6 Standard becomes 100% utilized? A. The system allocates more raw space for use by this pagepool class. B. Data progression no longer moves data into this pagepool class. C. Data progression moves data from this pagepool class into another class. D. Performance is degraded for volumes with active data m this pagepool class Answer: B NO.7 Refer to the exhibit. Get Latest & Valid DSDSC-200 Exam's Question and Answers 3 from Actual4test.com. 3

5 Which action will delete only page C1? A. Expire replay 2 B. ire replay 1 C. Expire replay 3 D. Expire replay 4 Answer: B NO.8 Refer to the exhibit. An engineer has almost finished the setup wizard when the screen appears as shown. What are two reasons that FC should remain in Legacy mode? (Choose two.) A. The customer has servers that run an older version of AIX. Get Latest & Valid DSDSC-200 Exam's Question and Answers 4 from Actual4test.com. 4

6 B. The customer has an FC switch that does NOT support NPIV. C. The customer needs to replicate some volumes to an oldersc40. D. The environment only has one fabric/network. Answer: A,B NO.9 An administrator needs to be sure to receive any Storage Center alerts when on-call. Which two actions should the deployment engineer take to meet this requirement? (Choose two.) A. Edit Settings of the Storage Center in Enterprise Manager > go to the SNMP Server tab > configure the Storage Center to forward information to the SNMP server B. Go to the Threshold Alerts viewer in Enterprise Manager > configure a Threshold Definition with their userid selected > click the Forward All Alerts button C. Edit Settings of the Storage Center in Enterprise Manager > configure the server on the SMTP server tab enter the appropriate address on the Contact tab of then Storage Center userid D. Go to the Chargeback Viewer in Enterprise Manager > create a Department > assign volumes to the Department check the Export Department Reports box Answer: D NO.10 The deployment engineer runs all of the commands to initialize the system and reboot the controller. The engineer then tries to log in several times as tunes asadmin/mmm before the setup wizard runs. This login fails. Why is the user Admin/mmm unable to log in? A. The account has been locked because the user tried to type the password multiple tunes before die system was fully initialized B. The default password for the Admin account is P@ssword 1. C. The user changed the password for Admin during the initialization process. D. The first login must be done with the user "shellaccess" and the password "developer". Answer: A NO.11 An engineer has installed an SC8000 with 15K drives in Tier 1, and 7K drives in Tier 3. The volume is created using the recommended storage profile. A replay is taken after the initial data is imported, which results in On Demand Data Progression running. What is going to happen to the data? A. Drozen user data is converted to Raid 5/6 from Raid 10 immediately. B. The oldest data moves to the lowest storage tier. C. Data moves from Tier1 storage to Tier 3. D. Data moves to the lowest storage tier allowed by the storage profile. Answer: C NO.12 An engineer needs to configure a server. The server is connected to a Storage Center via iscsi using or more hardware iscsi host bus adapters. If connectivity is lost due to controller failover, the server needs to reconnect to the Storage Center Get Latest & Valid DSDSC-200 Exam's Question and Answers 5 from Actual4test.com. 5

7 iscsi target ports. Which HBA feature must be enabled to meet the requirement? A. Delayed ACK B. Spin Up Delay C. ARP Redirect D. MAC Spoofing Answer: C Get Latest & Valid DSDSC-200 Exam's Question and Answers 6 from Actual4test.com. 6