Testkings.ACMP_ QA

Transcription

1 Testkings.ACMP_ QA Number: ACMP_6.3 Passing Score: 800 Time Limit: 120 min File Version: 9.3 ACMP_6.3 Aruba Certified Mobility Professional 6.3 Provided information is extremely useful for you. Enjoy the real success with nicely written Questions with many corrections inside. I am deeply impressed by the quality of Study Material provided by Exam collection. It is not only impressive but it works too. I passed the certification exams with flying colors with the help of this dump. Their Questions Answers are very useful for me. There is a ton of practice test questions - with explanations on the answers - which teaches you the concepts; I would definitely recommend this one. All the best for your next Exam :)

2

3 Exam A QUESTION 1 Centralized licensing is not in use on an Aruba based network which has a Master and three local controllers. No APs terminate on the Master controller. Roles and Firewall policies need to be created and applied, hence PEF-NG license is required On which controller should the license be installed? A. Only the master controller since role and firewall policies are created here. B. Only the local controllers since firewall policies are applied here C. The master and all three local controllers D. This isn't the correct license for this purpose, use PEF-VPN license E. This is not needed because PEF-NG is part of base OS Correct Answer: C /Reference: QUESTION 2 What information do you need to generate a feature license key for an Aruba controller? A. The controller's MAC address and the feature description. B. Controller's MAC address and the certificate number C. Controller's Serial Number and the feature description D. Controller's Serial Number and the certificate number E. Controller's MAC address and Serial Number Correct Answer: D /Reference: QUESTION 3 What are the PEF-NG license limits based on?

4 A. Number of APs B. One license per controller C. Number of users D. Number of local controllers E. Master Controller total user count Correct Answer: A /Reference: QUESTION 4 Which of the following licenses are consumed by Mesh APs advertising an SSIDs? A. AP license B. Mesh license C. PEF-V license D. No license is required E. RAP License Correct Answer: A /Reference: QUESTION 5

5 By default Centralized licensing messages between master controllers are sent. A. In the clear unencrypted B. Using CPSec C. Using IPSec site to site VPN tunnels D. Encrypted using GRE E. PAPI Correct Answer: A /Reference: QUESTION 6 Which of the following will occur if a master license server fails with no standby server present? (Choose two) A. Local controllers licenses will continue to be valid for 30 days B. Local controllers will immediately remove all installed licenses C. No licenses will be sent to any new controllers that come online D. All licenses go back into the pool for redistribution E. A Local Controller elects itself master license server Correct Answer: AC /Reference: QUESTION 7 Which may be applied directly to an VLAN interface? (Choose three) A. Access List (ACL) B. Firewall Policy C. Roles D. AAA profiles

6 E. RF Plan Map Correct Answer: ABD /Reference: QUESTION 8 When creating a firewall rule on an Aruba controller, which parameter is optional? A. Destination B. Service C. Source D. Log E. Action Correct Answer: D /Reference: QUESTION 9 An administrator creates a WLAN with an unmodified default AAA profile. What is the default role the user is placed in? A. default-logon B. logon C. guest-logon D. default-ap E. AP-Role Correct Answer: B /Reference:

7 QUESTION 10 What is the first role a user is given when a user associates to an open WLAN? A. The guest post authentication role B. The initial role in the captive portal profile C. The role in the server group profile D. The initial role in the AAA profile E. The initial role in the 802.1x profile Correct Answer: D /Reference: QUESTION 11 Which of the following could be used to set a user's post-authentication role or VLAN association? (Choose two) A. AAA default role for authentication method B. Server Derivation Rule C. Vendor Specific Attributes D. AP Derivation Rule E. The Global AAA profile Correct Answer: BC /Reference:

8 QUESTION 12 Which describe "roles" as used on Aruba Mobility Controllers? (Choose two) A. Roles are assigned to users. B. Roles are applied to interfaces. C. Policies are built from roles. D. A user can belong to only one role at a time. E. Roles are a set of authentication rules Correct Answer: AD /Reference: QUESTION 13 Which netdestination aliases are built into the controller? (Choose three) A. logon B. any C. user D. guest E. localip Correct Answer: BCE /Reference:

9 QUESTION 14 What are aliases used for? A. Improve controller performance B. Simplify the configuration process C. Tie IP addresses to ports D. Assign rules to policies E. Assign policies to roles Correct Answer: B /Reference: QUESTION 15 Which of the following firewall rules allows a user to initiate an ICMP session to other devices? (Choose two) A. localip any svc-icmp permit B. user any svc-icmp permit C. user user svc-icmp permit D. any any svc-icmp permit E. mswitch any svc-icmp permit Correct Answer: BD /Reference: QUESTION 16 The Aruba Policy Enforcement Firewall (PEF-NG) module supports destination network address translation (dst-nat). Which is the default use of this statement in an Aruba controller configuration?

10 A. Source the IP addresses of users to specific IP address B. Redirect HTTP sessions to Captive Portal C. Redirect Access Points to another Aruba controller D. Provide a telnet connection to the controller E. Redirect a SSH session to terminate on the controller Correct Answer: B /Reference: QUESTION 17 The Aruba Policy Enforcement Firewall (PEF) module supports source network address translation (src-nat). Which is a use of this statement in an Aruba configuration? A. Provide a single source IP address for users in a role B. Redirect Captive Portal HTTP sessions C. Redirect Access Points to another Aruba controller D. Provide IP addresses to clients E. Redirects clients to Aruba Firewall Correct Answer: A /Reference: QUESTION 18 The network administrator wishes to terminate the VPN encryption on the Aruba controller. When writing a firewall rule to accomplish the task of automatically moving the VPN traffic for the wireless clients from a third party VPN concentrator to an Aruba controller, which action needs to be configured in the rule? A. redirect to IPSec Group B. source NAT

11 C. destination NAT D. redirect to tunnel E. redirect to GRE Correct Answer: C /Reference: QUESTION 19 Which of these are NOT a client attribute that can be configured in user derivation rules? A. MAC address B. DHCP option value C. BSSID D. Filter ID E. encryption Correct Answer: D /Reference: QUESTION 20 What are the types of user derivation rules that can be applied to a user? (Choose two) A. SSID B. MAC C. VLAN D. Role E. AP Correct Answer: CD

12 /Reference: QUESTION 21 Which is a Device Specific Attribute that can be evaluated in a user derivation rule? A. user login name B. authentication server C. location by AP Name D. controller Loopback address E. controller IP Correct Answer: C /Reference: QUESTION 22 View the Server group and User Roles screen shots above.

13 A user associated to an SSID with 802.1x using this server group. RadiusNY returned a standard radius attribute of filter-id with a value of "employee". What Role will the user get?

14 A. The User will get the Emp Role B. The User will get the 802.1x authentication default Role C. The User will get the employee Role D. The User will get the Employee Role E. The User will get the initial Role Correct Answer: B /Reference: QUESTION 23 Which profiles are required in an AP Group to enable an SSID with VLAN 1, WPA2 and LMSIP? (Choose three) A. Virtual-AP profile B. WLAN profile C x authentication profile D. AP System Profile E. SSID Profile Correct Answer: ADE /Reference: QUESTION 24 A user connected to a Captive Portal VAP successfully. When the user opens their browser and tries to access their homepage, they get redirected as expected to another URL on the Aruba Controller. However, they see an error message that web authentication has been disabled. What might be a cause of this? A. Captive Portal has not been assigned in the SSID profile. B. The Captive portal profile has not been assigned to the AAA profile. C. A server group has not been assigned to the captive portal profile. D. An initial role has not been assigned to the AAA profile.

15 E. The Captive portal profile has not been assigned to the initial role. Correct Answer: E /Reference: QUESTION 25 Which of the following will accept named VLANs as a parameter? (Choose three) A. Virtual AP profile B. User derivation rule for a single VLAN C. Server derivation rule for a single VLAN D. Server derivation rule for a VLAN Pool E. Access VLAN for a VLAN Pool Correct Answer: ABC /Reference: QUESTION 26 A customer has a remote AP deployment, where each remote AP has an IPSEC VPN tunnel with L2TP to the controller. 1 of the remote APs is stuck in the user table and hasn't yet transitioned to the AP active table in the controller. The customer suspects that the AP is not setting up its VPN connection successfully. Which of the following commands might be useful in troubleshooting this? (Choose three) A. Logging level debugging security process localdb B. Logging level debugging security process l2tp C. Logging level debugging security process dot1x D. Logging level debugging security process crypto E. Logging level debugging security process vpn Correct Answer: ABD

16 /Reference: QUESTION 27 The screen captures below show the 802.1X authentication profile and AAA profile settings for a VAP.

17 If machine authentication fails and user authentication passes, which role will be assigned? A. employee B. guest C. contractor D. logon E. no role is assigned Correct Answer: B /Reference: QUESTION 28 The screen captures above show the 802.1X authentication profile and AAA profile settings for a VAP.

18

19 If machine authentication passes and user authentication fails, which role will be assigned? A. employee B. guest C. contractor D. logon E. no role is assigned Correct Answer: B /Reference: QUESTION 29 The screen captures above show the 802.1X authentication profile and AAA profile settings for a VAP.

20

21 If machine authentication fails and user authentication fails, which role will be assigned? A. Employee B. Guest C. Captive Portal D. Logon E. No role will be assigned Correct Answer: E /Reference: QUESTION 30 What can NOT be configured from the Aruba controller configuration wizards?

22 A. Controller IP B. Boot Partition C. User firewall policy. D. User derivation rules. E. Radius Servers Correct Answer: B /Reference: QUESTION 31 An administrator is setting up a factory default controller. No new AP groups were created. When adding a WLAN SSID in the Campus WLAN wizard what AP group is available? A. The air-monitors AP group B. The logon AP group C. The default AP group D. The initial AP group E. The Spectrum AP group Correct Answer: C /Reference: QUESTION 32 The reusable Aruba Controller wizards are accessible in what way?

23 A. Only on startup through the CLI B. Through the CLI, after the initial CLI wizard has been completed C. In the Web UI under maintenance. D. In the Web UI under configuration. E. Must be initialized from CLI first. Correct Answer: D /Reference: QUESTION 33 The Contrtoller wizard enables which of the following controller clock configurations? (Choose three) A. NTP to a time server B. Set time zone C. Daylight savings time D. Only GMT can be configured E. Manual configuration of date and time Correct Answer: ABE /Reference: QUESTION 34 When configuring ports in the Controller wizard, which of the following are NOT configuration options? (Choose two) A. Inter-VLAN routing B. Speed C. Trusted D. LACP E. Trunk

24 Correct Answer: AD /Reference: QUESTION 35 By default, which CLI based remote access method is enabled on Aruba controllers? A. RSH B. Telnet C. SSH D. Telnet and SSH E. Telnet, SSH and RSH Correct Answer: C /Reference: QUESTION 36 An Aruba controller can be accessed with which CLI based remote access methods? (Choose two) A. RSH B. Telnet C. SSH D. SFTP E. SCP Correct Answer: BC /Reference:

25 QUESTION 37 As an admin/root user, what other type of role-based management users can be created on Aruba controllers? A. Auditing-compliance user B. AirWave management user C. Reporting Generation user D. Guest provisioning user E. Maintenance user Correct Answer: D /Reference: QUESTION 38 Which log type should be enabled to troubleshoot IPSec authentication issues on Aruba Controllers? A. Security Logs B. Management Logs C. Wireless Logs D. IDS Logs E. System Logs Correct Answer: A /Reference: QUESTION 39 Exhibit:

26

27 Referring to the above screen capture, if an administrator desires to change a specific AP into a Spectrum Monitor without assigning the AP to a new group, which menus could be used? A. Network > Controller B. Wireless > AP Configuration C. Wireless > AP Installation D. Advanced Services > Wireless E. Wizards > WIP Wizard Correct Answer: B /Reference: QUESTION 40 Exhibit:

28 The above diagram has one master and three local controllers. AP1 GRE terminates on controller Local 1. All controllers are configured with the wireless user VLAN 201. A wireless user associates with AP 1. Only L2 mobility is enabled. Which elements will know about this association? A. Local 1 only B. Local 1 and the Master C. Local 1 and Local 2 and the Master D. Local 1 and AP1 E. All Controllers Correct Answer: B

29 /Reference: QUESTION 41 Which command will show all client association history? A. Aruba-6000# show mobile trail current (ip address) B. Aruba-6000# show ip mobile trail (ip address) C. Aruba-6000# show ap client status (mac address) D. Aruba-6000# show current client ip (ip address) E. Aruba-6000# show client ip (ip address) mobility Correct Answer: B /Reference: Updated Answer. QUESTION 42 With CPSec enabled, which tunnel protocol is used between APs and Controllers in an Aruba environment? A. EAP B. SSH C. IPinIP D. Mobile IP E. IPSec Correct Answer: E /Reference: QUESTION 43 By default, how long will an AP scan a single channel when ARM is enabled?

30 A. 80 milliseconds B. 90 milliseconds C. 100 milliseconds D. 110 milliseconds E. 200 milliseconds Correct Answer: D /Reference: QUESTION 44 Which actions does ARM (Adaptive Radio Management) perform? (Choose two) A. Allows controllers to provision the AP Radio type B. Allows controllers to provision the best channel for APs C. Allows controllers to provision the best power setting for APs D. Allows controllers to provision allowed Radio bands E. Allows controllers to provision lower power when unauthorized APs are detected Correct Answer: BC /Reference: QUESTION 45 Which of the following metrics does the ARM feature use to calculate the optimal channel and power level for Access Points? (Choose two) A. RF Spectrum Index B. Priority Index C. Interference Index D. Coverage Index E. Frequency Index

31 Correct Answer: CD /Reference: QUESTION 46 How does the ARM Band Steering feature encourage 5GHz capable clients to move/connect to the 5GHz radios of Aruba APs? A. ARM suppresses the probe response on the 2.4 GHz radio B. ARM utilizes third party software on the wireless clients C. Current Wi-Fi chipset firmware supports this by default D. It's not possible the move clients to 5GHz radios when they can see both 2.4 and 5GHz APs E. ARM disables the 2.4Ghz radio for the specified client Correct Answer: A /Reference: QUESTION 47 Which of the statements below are TRUE regarding ARM's Spectrum Load Balancing feature? (Choose two) A. Available only on 5GHz radios B. Disabled by default C. Balances client load across available channels/aps D. Enabled by default E. Available only on 2.4GHz radios Correct Answer: BC /Reference:

32 QUESTION 48 What is the function of Band Steering? A. Balancing clients across APs on different channels within the same band B. Encourages clients, 5GHz capable, to connect on the 5GHz spectrum C. Coordinate access to the same channel across multiple APs D. Enables selection of 20 vs. 40 MHz mode of operation per band E. Enables acceptable coverage index on both the "b/g" and "a" spectrums Correct Answer: B /Reference: QUESTION 49 What are the Airtime Allocation Policy options for Airtime Fairness? (Choose three) A. Default Access B. Priority Access C. Fair Access D. Preferred Access E. Distributed Access Correct Answer: ACD /Reference: QUESTION 50 Which of the following statements is true of Spectrum Mode? A. No licenses are required to run an AP in Spectrum mode B. Spectrum mode can only be configured for one AP at a time

33 C. An AP can be in spectrum mode for both 2.4 and 5G bands at the same time D. An AP can be placed in Spectrum Mode via the Spectrum Profile E. Spectrum mode can be configured from the GUI under AP installation Correct Answer: C /Reference: QUESTION 51 Which ARM feature addresses the issue of sticky clients by moving clients to associate to APs with better signal quality? A. Co-Channel interference mitigation B. Airtime Fairness C. ClientMatch D. Coordinated access to a single channel E. Band Steering Correct Answer: C /Reference: QUESTION 52 Aruba Client Match does NOT use which of the following parameters to determine the best AP for a client connection? (Choose two) A. Device type B. Location C. Signal to Noise Ratio D. Access Point load E. Spectrum Analysis Correct Answer: CD

34 /Reference: QUESTION 53 Which settings cannot be modified directly from a local controller? A. Port VLAN setting B. Switch Time Zone C. Port trusted D. Roles E. SNMP Enable Trap Generation Correct Answer: D /Reference: QUESTION 54 Masters communicate configuration information with locals using which tunnel type? A. GRE B. IP in IP C. Provision Tunnel Protocol D. IPSec E. PPTP Correct Answer: D /Reference: QUESTION 55 In the above screen capture:

35 The administrator notes that most of the configuration options are grayed out and have no action. What is the cause of the problem? A. attempting to make global changes on a Master Controller B. attempting to make global changes on a Local Controller C. this change can only be performed via the CLI

36 D. does not have the correct software license E. there is an error in the configuration Correct Answer: B /Reference: QUESTION 56 Exhibit: Referring to the above screen capture, on which Controller can you create a vlan? A. Controller only B. Controller and only C. All three Controllers D. None of the Controllers E. Controller only Correct Answer: C /Reference: Valid absolutely.

37 QUESTION 57 Exhibit: Referring to the above screen capture, on which controller can you add an administrative user and assign a controller management role? A. Controller only B. Controller and only C. All three Controllers D. Must be done in the RADIUS server E. Controller only Correct Answer: C /Reference: QUESTION 58 Refer to the above screen capture.

38 By default, which controller's internal database will be used for user authentication? A. Controller only B. Controller and only C. All three Controllers D. You can't tell from this screen E. The Controller with the user session Correct Answer: A /Reference: QUESTION 59 Exhibit:

39 Referring to the above screen capture, on which controller can you modify APs configuration to enable ARM? A. Controller only B. Controller and only C. All three Controllers D. None of the Controllers E. On Controllers where ARM is enabled Correct Answer: A /Reference: QUESTION 60 With CPSec disabled, Aruba access points are Layer 3 connected to controllers using which protocol? A q B. LWAPP C. PPTP D. GRE E. HTTPs Correct Answer: D /Reference: QUESTION 61 With CPSec disabled, which encryption protocol does a tunnel mode campus AP use on client traffic? A. TKIP and AES B. It is provisioned by the Administrator C. WEP and AES

40 D. WEP, TKIP, and AES E. No encryption is used Correct Answer: E /Reference: QUESTION 62 In a campus environment, where are encryption keys sent or stored when users roam between tunneled mode APs on the same controller using 802.1X? A. sent to the new AP via GRE B. sent to the new AP via IPSec C. stored on the controller D. stored on the RADIUS server E. original AP sends keys to new AP Correct Answer: C /Reference: QUESTION 63 In the diagram provided for this question, the wireless user's laptop is associated with an Aruba AP in tunnel forwarding mode. The AP terminates on the local controller.

41 When the client transmits, where will the headers be removed? A. AP B. L2 Switch C. Router D. Controller E. Internet Correct Answer: D

42 /Reference: QUESTION 64 When configuring a server group containing 3 servers, a customer chooses 'fail through mode'. What other configuration option has to be enabled on the controller for this to work with 802.1x authentication? A. Machine authentication B. EAP Termination C. Server group fall through mode D. MAC authentication E. Round robin or top down mode Correct Answer: B /Reference: QUESTION 65 A campus AP has been provisioned with a VAP in bridge forwarding and standard operation modes. Which of the following authentication types are supported? (Choose two) A X authentication B. Open System authentication C. Local authentication D. Captive portal authentication E. VPN authentication Correct Answer: AB /Reference: QUESTION 66

43 Which method is NOT supported to provision an Aruba campus AP? A. Telnet directly to AP B. SSH to the AP's controller C. Web interface to the AP's controller D. Console to AP E. CLI on controller Correct Answer: A /Reference: Answer is now modified. QUESTION 67 When direct consoled to an AP, what is the command sequence to factory default the AP and re- bootstrap? A. setenv bootstat init B. setenv master init, boot C. purge, save, boot D. init, save, boot E. print, purge, boot Correct Answer: C /Reference: QUESTION 68 What settings need to be changed on a factory default AP in order for it to use ADP to discover the Aruba Controller? A. DNS of the controller B. Static route C. AP group D. enable multicast

44 E. no changes needed Correct Answer: E /Reference: QUESTION 69 As illustrated in the above diagram, a company has two campus locations and a building headquarters all located in different cities.

45 Following best practices, what would be the best way to construct mobility domains for the company? A. Buildings (1, 2) in one domain and Buildings (3, 4, 5, 6) in one domain B. Buildings (1, 2) in one domain, Building (3) in one domain, and Buildings (4, 5, 6) in one domain C. Buildings (1, 2, 4, 5, 6) in one domain and Building (3) in one domain D. Buildings (1, 2, 3, 4, 5, 6) in one domain E. Buildings (1) in one domain building (4) in one domain Correct Answer: B /Reference: QUESTION 70 How many Aruba controllers can be added to a single mobility domain? A. 64 controllers of any type B. 128 controllers supporting 2000 users C. 256 controllers with no more than 1024 subnets D. Controllers supporting up to 6000 AP's E. There is no controller limit Correct Answer: E /Reference: QUESTION 71 In a master-local controller scenario, where is the mobility domain defined? A. the AP group B. the master controller C. the local controller D. the master and the local controllers

46 E. the master and the local controllers where roaming is needed Correct Answer: B /Reference: QUESTION 72 A university has 2 departments. Department 1 has its own mobility domain with one controller. Department 2 has multiple controllers configured in a second domain. The university is planning on offering a new application and needs users to be able to roam between both mobility domains. What is the best way to accomplish this? A. The 2 existing domains should be left as they are. A 3rd mobility domain should then be created and all 3 controllers need to be added to it B. Merge the controllers into the same mobility domain C. The IP subnets of all controllers need to be configured to match D. This cannot be accomplished E. Create a new domain between a department 1 controller and one of the department 2 controllers Correct Answer: B /Reference: QUESTION 73 A port firewall policy is applied to a trunk port that denies controller access. An "allow all" Vlan firewall policy is applied to VLAN 33 on the same port. A user connected to VLAN 33 on that port attempts to gain access to the controller. Which of the following statements is true? A. The Port policy is applied, therefore no controller access B. The Vlan policy is applied, then the port policy, therefore no controller access C. The Vlan policy is applied, therefore access to the controller is allowed D. You cannot place a firewall policy on a Ports Vlan when the Port already has a policy, therefore no controller access E. When locally connected to a controller's port you always have controller access Correct Answer: C

47 /Reference: QUESTION 74 An access port has been placed in trusted mode. The Vlan on the port is in Untrusted mode. Which of the following statements is true? A. The traffic is trusted since the port is trusted B. The traffic is untrusted since the VLAN is untrusted C. This is an invalid configuration, both must be set the same D. You cannot set Vlans as trusted or untrusted E. Only traffic from that specific port is trusted, all other traffic is untrusted Correct Answer: B /Reference: QUESTION 75 A wired device is connected to an untrusted port on a controller. How can a role be assigned to the device? A. An initial Role can be assigned directly to the VLAN B. Roles are assigned to devices connected to a trusted port C. A default Role can be directly assigned to an untrusted port D. Adding a wired AAA profile to a VLAN on the untrusted port E. The Role assigned to the untrusted port Correct Answer: D /Reference:

48 QUESTION 76 A port on a controller has been configured as untrusted. No wired access AAA profile or Global AAA profile is configured. When a user connects to that port which of the following statements is true? A. Since there is no wired access AAA profile, only port policies will be applied B. The user will fall into the default wired access AAA profile and will be given the initial role. C. Since there is no wired access AAA profile or Global AAA profile the user will be given the logon role. D. When configuring the port as untrusted, an error message of "no wired access AAA profile exists" Therefore this is an invalid configuration. E. the user is denied all access automatically because no wired access AAA or Global AAA profile is assigned. Correct Answer: C /Reference: QUESTION 77 Which method can APs use to discover a controller? A. DHCP B. Dynamic DNS (DDNS) C. PnP D. PAPI E. HTTPS Correct Answer: A /Reference: QUESTION 78 When APs boot up, in which order do they discover a controller? A. DNS, DHCP, ADP multicast, ADP unicast, static B. static, DNS, DHCP, ADP broadcast, ADP multicast

49 C. static, DHCP, ADP multicast, ADP broadcast, DNS D. static, DHCP, DNS, ADP multicast, ADP broadcast E. DNS, static, ADP multicast, ADP broadcast Correct Answer: C /Reference: QUESTION 79 An AP is not communicating with the controller. Upon investigation you find that the AP is not discovering its controller through DNS. Instead, it received a DHCP reply with option 43 specifying the SIP server's IP address. How do you resolve this problem? A. Statically configure the AP to ignore Option 43 B. Remove the option 43 configuration on the DHCP server C. Statically configure the AP to only use DNS resolution and not other dynamic discovery methods D. After failing option 43 the AP should have proceeded with ADP, therefore the AP is faulty and needs to be replaced E. The AP should be purged Correct Answer: B /Reference: QUESTION 80 How is an AP redirected to a Local controller after DNS resolution returns the Master's IP address? A. Master looks at the AP-Group and CONTROLLER-IP attributes B. Master looks at the AP-Group and LMS-IP attributes C. In the AP-provisioning screen, the LMS-IP attribute must be set D. The AP must be statically configured to find the local controller E. In the AP-provisioning screen, set the CONTROLLER-IP attribute Correct Answer: B

50 /Reference: QUESTION 81 An AP was configured and assigned to an AP group then powered off for over a week. When the AP is redeployed, what previous configuration will it retain? A. It's AP name and AP Group B. It's Serial Number C. The controller's IP address D. After a few days all configurations are lost E. The controller IP address and the AP Group Correct Answer: A /Reference: QUESTION 82 A 3600 controller has 64 PEF-NG license, 128 AP licenses and 1 RFProtect license. How many AP's can terminate on the controller? A. 1 Campus APs B. 64 Campus APs C. 128 Remote APs D. 256 Remote APs E. 512 Remote APs Correct Answer: A /Reference: QUESTION 83

51 A 3200 controller has 16 AP licenses,16 PEF-NG licenses, 16 RFProtect licenses. There are 10 Campus APs terminating on the controller. How many remote AP's can terminate on the controller? A. 6 B. 12 C. 16 D. 24 E. 32 Correct Answer: A /Reference: QUESTION 84 Centralized licensing is not enabled in a network of 1 Master and 2 Local controllers, what should be the license count on all controllers to terminate 8 APs on each Local controller and support Local redundancy? A. 16 AP license on all controllers B. 8 AP license on Master and 16 AP license on both locals C. 8 AP license on all controllers D. 1 AP license on Master and 16 AP license on both locals E. 16 AP licenses on the Locals Correct Answer: D /Reference: QUESTION 85 An 7240 controller is Licensed for 560 APs. The controller has 500 Campus APs terminating on the controller. How many Remote APs can terminate on this controller? A. 12 B. 24

52 C. 48 D. 60 E. 120 Correct Answer: D /Reference: QUESTION 86 An Aruba Controller is configured with VLAN 1,5, 200, and All VLANs have IP addresses assigned. Which is the default management VLAN on the Aruba controller? A. VLAN 5 B. VLAN 1 C. VLAN 200 D. None, it must be defined E. VLAN 4095 Correct Answer: B /Reference: QUESTION 87 Which of the following statements is true? A. Aruba Campus APs must be physically attached to the Aruba Controller. B. Aruba Campus APs must be in the same broadcast domain as the Controller. C. Aruba Campus APs can be in different subnets from the Controller. D. Aruba Campus APs must be physically attached to the same Layer 3 switch. E. Aruba Campus APs can be connected directly to the public internet. Correct Answer: C

53 /Reference: QUESTION 88 Exhibit: Referring to the diagram provided for this question, in which locations must you define the new data VLANs for wireless client traffic? (Choose two) A. in all L2 switches where an Aruba AP is physically connected B. in all APs and the L2 switches to which they are connected C. in the Aruba controller and the router it's connected to in an L2 deployment D. in the routers and switches where the APs are physically connected E. only on the Aruba controller in an L3 deployment Correct Answer: CE

54 /Reference: QUESTION 89 A controller is provisioned in L3 Mode for Wireless Users. What must be configured on the controller to enable DHCP requests to an external DHCP server? A. an IP helper command B. the IP address of the DNS server C. the IP address of the APs D. the subnet address of the DHCP server E. the DHCP server IPSEC Key Correct Answer: A /Reference: QUESTION 90 Which parameter(s) does a Master controller use to determine where a provisioned AP should terminate its GRE tunnel? A. the IP address of the AP B. the MAC address of the AP C. the IP address of the switch nearest to the AP D. the name and group settings of the AP E. the VLAN the AP is attached to Correct Answer: D /Reference: QUESTION 91 Which of the following configurations can accept a VLAN pool? (Choose two)

55 A. Trunk native VLAN B. Virtual AP profile C. User Role D. Server derived role E. FW Policies Correct Answer: BC /Reference: QUESTION 92 What does Aruba Layer 3 redundancy require to operate? A. LMS-IP B. Backup LMS-IP C. VRRP D. Backup AP group E. ARM Correct Answer: B /Reference: QUESTION 93 Exhibit:

56

57 In the diagram provided for this question, the client laptop is associated with the Aruba AP. The Aruba controller is configured to perform L2 switching for this SSID. What will be the client laptop default gateway?

58 A. A B. B C. C D. D E. E Correct Answer: C /Reference: Right answer. QUESTION 94 In the diagram provided for this question, the Aruba controller terminates one end of a GRE tunnel that carries wireless user traffic.

59 Where does the other end terminate? A. A B. B C. C D. D E. A or B Correct Answer: A

60 /Reference: QUESTION 95 In the above diagram, the system shows two Aruba access points and a wired user. Which VLAN(s) do NOT need to be configured on link A between the L2 switch and router to support the wireless users? A. 101 and 102 B. 101 and 103 C. 102 and 103 D. only 101 E. only 103 Correct Answer: A

61 /Reference: QUESTION 96 In the above diagram, the system shows two Aruba access points. Which VLANs must be configured on trunk link D between the router and Aruba controller to support wireless users when the controller is provisioned for L2 operations? A. 10, 101 and 102 B. 101 and 102 C. 101, 102 and 103

62 D. 10, 101,102 and 103 E. 10 and 103 Correct Answer: A /Reference: QUESTION 97 Exhibit:

63 Referring to the diagram provided for this question, if the Aruba controller is configured to perform L3 switching, what will be the wireless client laptop default gateway? A. A

64 B. B C. C D. D E. E Correct Answer: D /Reference: QUESTION 98 When configuring Captive Portal, which protocols are supported when accessing the Captive Portal? (Choose two) A. HTTPS B. VPN C. HTTP D. TELNET E. SSH Correct Answer: AC /Reference: QUESTION 99 When the controller is configured for Captive Portal and the user is only required to provide an address for authentication, which option is configured in the GUI? A. enable termination B. enable guest logon C. enable user logon D. eap method E. disable CP Login

65 Correct Answer: B /Reference: QUESTION 100 A user logged in with the Captive Portal settings shown in the above screen capture.

66 What does the user need to do to logout?

67 A. wait 30 minutes then logout B. wait 60 minutes then logout C. click Logout on the browser screen D. he cannot logout E. wait 10 seconds for redirect Correct Answer: C /Reference: QUESTION 101 Screenshots of the Captive Portal authentication profile and server group of a guest network are displayed above.

68

69 How was the user authenticated? A. with a radius server called Radius01 B. with the Internal database C. with a radius server called Internal D. with another form of authentication E. user wasn't authenticated against any server Correct Answer: E /Reference: QUESTION 102 Where should mobility domains be enabled in a network with 1 master, 1 backup master and 5 local controllers? A. Only on the master controller

70 B. All the local controllers in the network C. All the controllers where the client is allowed to roam D. Master and backup master E. Only on the backup master Correct Answer: C /Reference: QUESTION 103 What are two different methods of configuring AP redundancy between 2 local controllers? (Choose two) A. Fast-Failover B. Configure the locals as remote nodes C. Use named VLANS D. LMS and Backup LMS IP E. AP Redundancy can only be configured between a Master and Local Correct Answer: AD /Reference: QUESTION 104 An Aruba 650 controller is functioning as a standby Master. How many APs can it control while in standby mode? A. 0 B. 16 C. 24 D. 128 E. 256 Correct Answer: A

71 /Reference: QUESTION 105 Aruba pair of 3200XM controllers are licensed to their maximum and are configured as a VRRP pair. Each controller terminates 24 APs. One of the controllers fails. How many of the APs from the failed controller can fail over to the remaining controller? A. 8 B. 16 C. 32 D. 48 E. 96 Correct Answer: A /Reference: QUESTION 106 Which protocol does the Aruba controller utilize for controller redundancy? A. HSRP B. VRRP C. VPN D. GRE E. IP-IP Correct Answer: B /Reference:

72 QUESTION 107 With Fast-Failover disabled, to which IP address should the Aruba AP terminate its GRE tunnel for layer 2 controller redundancy to work and to support failover of access points? A. VRRP IP address B. management IP of an Aruba controller C. management IP of the backup Aruba controller D. HSRP IP address E. Loopback IP address of backup Aruba controller Correct Answer: A /Reference: QUESTION 108 When an Aruba 6000 controller has two M3 modules installed, for which uses may the modules be used? (Choose two) A. hot standby operations B. VRRP backup C. higher AP density per switch chassis D. Active-Active masters E. Active-Active master-backup Correct Answer: BC /Reference: QUESTION 109 Referring to the diagram provided for this question, an employee brought an unauthorized AP from home and attached the LAN port to the cubicle Ethernet port. All Aruba APs and AMs as well as the employee AP are in VLAN 80 and within RF range of each other. No traffic from the wired or wireless network has passed through the unauthorized AP yet, but the AP began wireless broadcasts.

73

74 How will the Aruba system initially classify the employee's non-aruba AP? A. a valid AP B. an AM C. a Rogue AP D. an interfering AP E. a known interfering AP Correct Answer: D /Reference: QUESTION 110 Referring to the diagram provided for this question, an employee brought an unauthorized AP from home and attached it to the cubicle Ethernet port as shown in the diagram. The APs are in VLANs as shown in the diagram. Only AP1 is within RF range.

75

76 How will the Aruba controller classify this AP? A. an AP B. an AM C. a Rogue AP D. an Interfering AP E. a workstation Correct Answer: D /Reference: QUESTION 111 Referring to the diagram provided for this question, an employee brought an unauthorized AP from home, but did not attach it to the LAN infrastructure. The APs are in the VLANs as shown in the diagram. Only AP1 is within RF range of the employee AP.

77

78 By default, how will the Aruba system classify the employee's AP? A. an AP B. an AM C. a Rogue AP D. an Interfering AP E. a valid workstation Correct Answer: D /Reference: QUESTION 112 What can an AM do that an AP cannot do? A. Detect rogue APs B. Detect an AP failure C. Scans all channels in under 1 minute D. Detect interfering APs E. Scan all valid channels Correct Answer: C /Reference: QUESTION 113 (group8) #show ap active Active AP Table Name Group IP Address 11g Clients 11g Ch/EIRP/MaxEIRP 11a Clients 11a Ch/EIRP/MaxEIRP

79 AP1 building AM 0 AM AP2 building AM 0 AM A user called technical support because they cannot see any of their APs in building one. You perform the "show" command as illustrated above. What can you conclude about these two APs from this output? A. the GRE for the APs terminate on two different controllers: and B. the system will not function because there is no building1 group defined C. the building1 APs will not accept any user connections D. the user needs to configure his client to use the b/g band E. the user needs to configure his client to use the a band Correct Answer: C /Reference: QUESTION 114 Exhibit:

80 Based on the above screen capture for Interfering APs, what can you conclude? A. The APs must be connected to the Aruba network. B. The APs are classified as interfering because they are all transmitting on channel 6. C. There must not be any evidence that the APs are attached to the wired corporate network. D. These APs are classified as interfering because they are not Aruba APs. E. They are classified as interfering because they are running in g mode. Correct Answer: C /Reference: QUESTION 115

81 As illustrated in the above diagram and screen capture, a wireless hacker injects messages into your network to detach a client from your Aruba AP.

82 What action should you take to identify and prevent the Intruder from connecting to your system? (Choose two) A. Enable Detect disconnect Station Attack B. Enable Spoofed Deauth Blacklist C. Take no action as there is no protection against this form of attack D. Take no action as the Aruba system ignores this attack because it is against the client E. Enable Detect EAP rate Anomaly Correct Answer: AB /Reference: QUESTION 116 (group8) #show ap arm history ap-name AP1 Interface :wifi0 ARM History Time of Change Old Channel New Channel Old Power New Power Reason :58: I :52: M :16: I Interface :wifi1 ARM History Time of Change Old Channel New Channel Old Power New Power Reason :52: I Referring to the output above. What can you conclude about AP1? A. This device is scanning channels. B. This device is unstable because the channel assignment changed. C. The device changed channels recently. D. The device changed channels and power levels recently. E. The device is transmitting at maximum power levels.

83 Correct Answer: C /Reference: QUESTION 117 Which of the following parameters can be specified in a rule for AP classification? (Choose three) A. SSID of an AP B. Number of clients connected to an AP. C. SNR of an AP. D. Operating mode of an AP E. Discovering APs Correct Answer: ACE /Reference: QUESTION 118 Which of the following functions can be configured in the Controller WIP wizard? (Choose three) A. Configure APs as Air Monitors B. Configure rules for AP classification. C. Configure preset levels for intrusion detection D. Blacklisting Rules for clients E. Identify encryption method used in your network. Correct Answer: BCE /Reference:

84 QUESTION 119 A client device associates with an SSID provisioned with 802.1X authentication. The client is set for PEAP authentication. EAP termination (AAA Fastconnect) is disabled on the controller. But the client continuously cycles through the authentication process. Which of the following could cause this? (Choose two) A. The client is provisioned with the wrong EAP type. B. The client has an expired or revoked server certificate. C. The DHCP server is not enabled. D. The VLAN is missing for the SSID. E. The controller does not support PEAP in this mode. Correct Answer: AB /Reference: QUESTION 120 A client device associates with an SSID provisioned with 802.1X authentication. The client is set for LEAP authentication. EAP termination (AAA Fastconnect) is enabled on the controller. But the client continuously cycles through the authentication process. Which of the following could cause this? A. The Radius server is rejecting the client credentials. B. The client has an expired or revoked server certificate. C. The DHCP server is not enabled. D. The VLAN is missing for the SSID. E. The controller does not support LEAP in this mode. Correct Answer: E

85 /Reference: QUESTION 121 A client attaches to a secure jack interface set to untrusted. But when the client tries to access the captive portal page, the following message appears, "Web Authentication is not enabled." What might be wrong? A. The client has the browser provisioned with proxy settings. B. The controller port needs to be set to trusted. C. A "aaa" profile needs to be selected on the Wired Access page. D. A Captive Portal profile needs to be assigned to the initial role. E. Web Authentication cannot be used in this way. Correct Answer: D /Reference: QUESTION 122 Which command, when executed on a master controller, will show the APs connected to all controllers? A. show stm connectivity B. show ap active C. show ap database D. show ap bss-table E. show ap controller-lms Correct Answer: C /Reference: QUESTION 123 Which of the following commands is most useful in showing the traffic of an individual user?

86 A. show datapath session table B. show acl hits C. show rights D. show firewall E. show traffic client Correct Answer: A /Reference: QUESTION 124 An Aruba based network has a Master and four local controllers deployed. But one of the locals, a new installation, is not seen by the Master. What might be wrong? (Choose two) A. PAPI is not enabled on the local controller. B. The master controller can only support three local controllers. C. IPSec is blocked by the internal network between the local and the master controllers. D. The passphrase does not match on the master and local controllers. E. GRE is blocked between the master and local controllers. Correct Answer: CD /Reference: QUESTION 125 An Aruba controller is configured with the correct IP address and gateway information and is connected to the corporate LAN via a core layer 2 switch. Control Plane Security is not enabled on the network. An access point is provisioned with AP name and group and connected to a different Layer 2 switch on the corporate LAN that has IP connectivity to the core layer 2 switch. The AP powers on and layer 2 connects to the network, but the wireless radios do not power on. Which could cause this condition? (Choose two) A. the layer 2 switches have ACLs that block GRE traffic

87 B. the layer 2 switches are configured to block IPSec traffic C. a DHCP server is not configured for the segment to which the AP is connected D. the AP's mac address needs to be configured in the Aruba controller whitelist. E. the AP and controller are in different subnets Correct Answer: AC /Reference: QUESTION 126 In the diagram provided for this question, four buildings are identified on a college campus. Most of the wireless LAN traffic will be from students accessing the internet.

88

89 According to Aruba best practices, which building is the best location to install the Aruba mobility controller? A. data center B. dormitory C. server farm D. library E. 3rd party site Correct Answer: A /Reference: QUESTION 127 Referring to the diagram provided for this question, representing an office wireless LAN deployment, there will be approximately 250 users in the offices section of the building. All Switches are setup as L3 routers.

90 According to Aruba best practice, which network device is the best choice for the wireless clients' default gateway? A. device 'A' B. device 'B' C. device 'C' D. device 'D' E. device 'C or D' Correct Answer: B

91 /Reference: QUESTION 128 One hundred (100) additional APs were deployed in an existing network. But some APs are not able to connect to the lms-ip address, even though all of the APs belong to the same AP group. Which of the following are NOT potential causes? (Choose two) A. The problem APs are not getting an IP address. B. The problem APs have the wrong lms-ip address setting. C. There is a firewall between the problem APs and the controller blocking PAPI. D. The controller does not support that many APs in a single AP-Group. E. There are not enough AP licenses to support the additional quantity of APs. Correct Answer: BD /Reference: QUESTION 129 IEEE r provides support for which of the following: A. radio measurements within a WLAN B. radio measurement within an ESS C. fast roaming within an ESS D. fast roaming within a BSS E. roaming across controllers Correct Answer: C /Reference:

92 QUESTION 130 If a Remote AP (RAP) is attempting to contact a controller that is behind a NAT device what protocol must be allowed through the NAT/Firewall? A. PAPI B. NATT C. IPSec D. SSH E. GRE Correct Answer: B /Reference: QUESTION 131 Which of the following are NOT valid RAP forwarding modes? (Choose two) A. Tunnel B. Bridge C. Split-Tunnel D. Backup E. Standard Correct Answer: DE /Reference: QUESTION 132 Which of the following are valid RAP operating modes? A. Always, Backup, Standard, Persistent B. Always, Backup, Tunnel, Persistent C. Always, Hotel-Connect, Tunnel, Standard

93 D. Backup, Hotel-Connect, Standard, Persistent E. Backup, Normal, Tunnel, Always Correct Answer: A /Reference: QUESTION 133 A Remote AP provisioned with an SSID in "Bridged" forwarding mode has which one of the following characteristics? A. The client obtains its IP address from the controller. B. The client's default gateway must be the controller. C. The client traffic is forwarded through a GRE tunnel to the controller. D. The client's default gateway may be the Access Point or a local gateway. E. The client's authentication must be 802.1X. Correct Answer: D /Reference: QUESTION 134 An AP 105 was converted into a RAP. The RAP can authenticate its IPSec tunnel to a controller using which of the following methods? (Choose two) A X/EAP authentication B. Captive Portal authentication C. IP address authentication D. Username/Password authentication. E. Certificate/MAC address authentication. Correct Answer: DE

94 /Reference: QUESTION 135 Which of the following describes a Remote AP provisioned in "Split-Tunnel" Forwarding mode? A. Local user traffic first goes to the controller and is then spilt back to the local network. B. All data and control traffic goes to the controller unsecured. C. The user role must have a "Permit" statement in order to locally bridge the traffic. D. The user role must have a "route src-nat" statement to locally bridge the traffic. E. The RAP uses PAPI to send data traffic to the controller. Correct Answer: D /Reference: QUESTION 136 A Remote AP provisioned in "Split-Tunnel" Forwarding mode has which of the following characteristics? A. Local traffic first goes to the controller and is then spilt back to the local network. B. User Traffic is CPSec encrypted before it is sent to the controller. C. The user role must have a "Permit" statement in order to locally bridge the traffic. D. The user role must have a "permit dst-nat" statement to locally bridge the traffic. E. The RAP uses UDP 4500 to send traffic to the controller. Correct Answer: E /Reference: The correction is added now. QUESTION 137 What is the purpose of Mesh Clusters?

95 A. To separate Mesh points from Mesh Portals. B. To ensure that mesh APs with the same VAPs are not in the same cluster. C. To define a group of mesh APs that create mesh links with each other. D. To cluster mesh APs of the same model together. E. To enable mesh APs to join the nearest mesh portal cluster. Correct Answer: C /Reference: QUESTION 138 A company purchased an indoor mesh deployment using the 620 controller and the AP 105 models, where 5 APs will be deployed on a floor to provide wireless internet access for users. Users may open VPN tunnels using software clients over the wireless network to a 3rd party VPN concentrator overseas. The company wants to limit wireless user access to TCP traffic locally and VPN traffic overseas. In addition to the base AOS, which licenses will be necessary for this deployment? A. VPN, PEF-NG B. AP Capacity, PEF-NG C. AP Capacity, PEF-NG, VPN D. AP Capacity E. PEF-NG, PEF-V Correct Answer: B /Reference: QUESTION 139 When deploying Remote Mesh Portals, what is one of the purposes of the Mesh Private VLAN? A. To separate wireless user traffic coming from mesh networks from non-mesh networks B. To tag mesh wireless user traffic on a particular AP

96 C. To allow Mesh Points to form private vlan networks with certain users D. To tag control plane traffic from Mesh points to the controller E. To tag clients high priority traffic Correct Answer: D /Reference: QUESTION 140 How does an Aruba infrastructure calculate a wireless device's location? A. GPS B. RF Fingerprinting C. RSSI triangulation D. TDOA E. LBS Correct Answer: C /Reference: QUESTION 141 Which of the following Aruba controllers is able to provide IEEE 802.3af? (Choose two) A B. 620 C. 650 D with M3 E Correct Answer: BC

97 /Reference: QUESTION 142 What is the maximum number of remote APs supported by a 3600 controller? A. 512 B C. 128 D. 256 E Correct Answer: A /Reference: QUESTION 143 Which dual radio access point models support concurrent operations in the 2.4Ghz band as well as the 5Ghz band? (Choose three) A. AP-92 B. AP-93 C. AP-105 D. AP-224 E. AP-135 Correct Answer: CDE /Reference: QUESTION 144 Which of the following APs do NOT support dual radio operations? (Choose two)

98 A. AP 93 B. AP 105 C. RAP 3WN D. AP 224 E. AP 135 Correct Answer: AC /Reference: QUESTION 145 When configuring split tunnel mode on a Remote AP (RAP) where is the routing function for the split tunnel defined? A. On the IP routing tab in the configuration screen. B. On the AP provisioning screen. C. In the RAP static routing tables D. In the Firewall policy E. In the RAP whitelist Correct Answer: D /Reference: QUESTION 146 When does a RAP's backup SSID begin broadcasting? A. When the GRE tunnel to the controller is established. B. When the IPSec tunnel to the controller is established. C. When the controller cannot be reached with PAPI D. When bridging is required for guest users. E. When the controller cannot be reached with SSL

99 Correct Answer: C /Reference: QUESTION 147 A Remote AP provisioned in "Split-Tunnel" Forwarding mode has which characteristic? A. Local traffic first goes to the controller and is then spilt back to the local network. B. Traffic is IPSec encrypted before it is sent to the controller. C. The user role must have a "Permit" statement in order to locally bridge the traffic. D. The user role must have a "route dst-nat" statement to locally bridge the traffic. E. The RAP uses PAPI to send data traffic to the controller. Correct Answer: B /Reference: QUESTION 148 A Remote AP was properly functioning before losing it's internet connection and now cannot communicate with the controller. What SSID is the AP broadcasting? A. The SSID in Operational mode Always and Forwarding mode Backup B. The SSID in Operational mode Split Tunnel and Forwarding mode Bridge C. The SSID in Operational mode Always and Forwarding mode Tunnel D. The SSID in Operational mode Standard and Forwarding mode Tunnel E. The SSID in Operational mode Persistent and Forwarding mode Bridge Correct Answer: E /Reference:

100 QUESTION 149 Which match condition can be used by a server derivation rule? (Choose two) A. greater than B. less than C. inverse of D. contains E. equals Correct Answer: DE /Reference: Corrected. QUESTION 150 An administrator wants to assign a VLAN to a user based upon the authentication process using Vendor Specific Attributes (VSA). Where are Aruba Vendor Specific Attribute (VSA) values provisioned? A. controller B. client C. RADIUS server D. Internal user database E. Option 60 of DHCP reply Correct Answer: C /Reference: QUESTION 151 View the Server group screen shot above.

101 A company has provisioned the same VAP, AAA and SSID profiles at both its Miami and NY offices. This Server Group is applied for 802.1x authentication at both locations. The user's credentials are only found in the Miami Radius server "RadiusMiami". There is no Radius synchronization and both servers are reachable. What happens when the user attempts to authenticate? A. The controller recognizes the users Domain and sends the authentication request directly to RadiusMiami. B. The request is initially sent to RadiusNY1 then RadiusNY1 redirects the controller to send the authentication request to RadiusMiami C. RadiusNY1 receives the request and returns a deny. No other action is taken. D. RadiusNY1 receives the request and returns a deny. The authentication request will then be sent to RadiusMiami. E. The RadiusNY1 sends the request to RadiusMiami that replies to the controller Correct Answer: C /Reference: QUESTION 152 View the Server group and User Roles screen shots above.