T-Series. High Reliability - Rack Space Saving KVM Extension Solution. The Logical Solution - Modular KVM Extension - DVI and SDI Support in One Unit

Transcription

1 MRTS Technology T-Series High Reliability - Rack Space Saving KVM Extension Solution T-4200 Chassis Dual Interface Modules Available Modules: Module 4 - One DVI display Module 5 - One DVI or RGB display Module 8 - One dual-link DVI display Module 24 - Two DVI displays SDI Xtreme 3G+ Module - Up to four SD/HD signals and up to two 3G/dual-link signals and RS-422 All modules support: USB 2.0 and USB 1.0 HID USB 1.0 HID (ONLY) Fiber Options Include: Single-Mode Multi-Mode The Logical Solution - Modular KVM Extension - DVI and SDI Support in One Unit The Velocitykvm line of extenders continues to evolve and add value with exciting new capabilities. The Velocitykvm T-4200 chassis is a high reliability, rack space saving solution. What was typically housed in two 1U chassis is now scaled down to a 1U chassis size, with a dual interface and current sharing power supplies. The dual interface design provides for two separate interface modules and users have the ability to combine module options within one chassis. These modules support a variety of video display options such as, RGB, single-link DVI, two single-link DVI displays, one dual-link DVI display, SDI, 3G, or dual-link SDI. In addition, all modules support PS2, full duplex stereo audio, stereo emitter, and serial (RS-232). Depending on your requirements, module model options feature either USB 1.0 HID (only), and/or USB 2.0 (up to 480 Mbps) device ports. Using multi-mode or single-mode fiber, the system allows users to locate a DVI monitor and peripherals via fiber from just a few meters up to 40 kilometers away from the controlling computer securely without the loss of resolution. Powered by Thinklogical s cutting edge, patent-pending MRTS (Multi Rate Transmission System) technology, the module transports every frame of a DVI video stream seamlessly, with no compression, or dropped frames. In addition, all high speed peripherals function with no latency making it ideally suited for a wide range of applications in the broadcast and post-production field, as well as command and control centers, universities, air traffic control, energy production and exploration, and any other commercial KVM applications.

2 High Reliability System Architecture Saves Rack Space The Velocitykvm T-4200 is the only extension product in the marketplace that provides high reliability with all of the essential features and functions necessary in mission critical environments. System architecture provides hot-swappable, current sharing power supply modules, a critical component in high up-time environments which typically are supported by more than one power grid as a failover option. In the unlikely event that a power module fails, there is no interruption to the component because they are both functioning. In addition, a dry contact annunciator provides an alarm warning in the event of a power failure or a unit overheating and a replacement may be installed with minimal downtime. The Velocitykvm T-4200 has a versatile modular design which allows the unit to be used in a variety of applications, as either a transmitter, receiver, or even a transceiver. In addition, the T-4200 is designed with dual, hot-swappable interface modules. Video interface options include support for one RGB connection, one single-link DVI connection, two single-link DVI connections, one dual-link DVI display connection, up to four SD/HD signals or up to two 3G/dual-link signals. Peripheral options include PS2, full duplex stereo audio, serial (RS-232), USB 2.0 and/or USB 1.0. This enables two functional source computers to be connected to one T-4200 transmitter, which then extends video and peripheral signals to two separate Velocitykvm stand alone receiver destinations at various workstation locations. For a complete routing and extension system, the T-4200 offers unprecedented integration with Thinklogical s entire line of Velocitykvm (stand alone) extenders, SDI Xtreme 3G+ extenders and the VX Router family of products. Velocitykvm T-4200 Transmitter Chassis Equipped with Two Module 24 Interfaces System Application Example Application Description: Two functional source computers connected to one Velocitykvm T-4200 transmitter chassis equipped with dual module 24 interface components, which extends video and peripheral signals to two separate Velocitykvm-24 (stand alone) receiver destinations at separate workstation locations. Signals are routed through two Thinklogical VX160 routers. The T-4200 unit connects to the CPU with the supplied peripheral cables.

3 VIDEO EXTENSION - Series Leveraging standard SFP+ transceivers, the system allows for the usage of either multi-mode or single-mode fiber optic cable. The Velocitykvm T-4200 dual module design requires two or three fibers for each module, with one or two fibers dedicated to the video and data and one dedicated to the back channels for the USB and DDC. The DDC (Display Data Channel) or EDID (Extended Display Identification Data) information is provided to the CPU by either a generic table stored inside the transmitter, or the displays table via an active link between the receiver and transmitter. The Velocitykvm T-Series offers best-in-class fiber optic performance with advanced peripheral and interface capability. The Velocitykvm T-Series modules offer the following model options: USB 2.0, PS2, Serial (RS-232), and Analog Stereo Audio (bidirectional) Complete support for USB high speed (2.0) devices (along with USB 1.1 support), ideal use for DVD drives, CDROM, Memory Stick, and other high speed storage and desktop peripherals. Supports 480Mb/second transfer rates. USB 1.0 (HID ONLY), PS2, Serial (RS-232), and Analog Stereo Audio (bidirectional) Designed for security conscious customers. No physical support for USB thumb drives or other full speed devices. Supports human interface devices only, such as keyboard, mouse, and tablets. Provides PS2/USB conversion. Velocitykvm T Back View Module 1 Module 2

4 Key Features Dual, hot-swappable interfaces interface module options (sold separately): Module 4 - One DVI display Module 5 - One DVI or RGB display Module 8 - One dual-link DVI display Module 24 - Two DVI displays SDI Xtreme 3G+ Module - Up to four SD/HD signals or up to two 3G/dual-link signals and RS-422 Dual, hot-swappable power supplies MRTS technology 6.25Gbps allows for full frame rate transmission of uncompressed DVI Models support USB HID, USB 2.0 compliant - high speed 480 Mbps., 4-port hub Full keyboard and mouse emulation through the transmitter, full duplex stereo audio, serial RS-232 Single-mode or multi-mode fiber options extend signals up to: meters using SX+ multi-mode fiber meters using esx+ multi-mode fiber - 40 kilometers using single-mode fiber DDC2B/EDID compliant Simple plug and play Stereo emitter for active 3D applications A dry contact annunciator provides an alarm warning in the event of a power failure or a unit overheating All models are available with standard LC type fiber connectors Fully compatible with Thinklogical's Velocitykvm Extension Systems, SDI Xtreme 3G+ Extenders and the VX Router line Velocitykvm T-4200 Receiver Chassis Equipped with Two Module 24 Interfaces System Application Example Application Description: Two functional source computers each connected to a Velocitykvm (stand alone) transmitter which extends video and peripheral signals to one Velocitykvm T-4200 receiver chassis equipped with dual module 24 interface components. T-4200 receiver extends to two destinations at separate workstation locations. Signals are routed through two Thinklogical VX160 routers.

5 Velocitykvm T-4200 Transceiver Chassis Equipped with One Module 24 TX and One Module 24 RX Interface - System Application Example Application Description: Two functional source computers, located at separate workstation locations, connected to one Velocitykvm T-4200 transceiver chassis equipped with dual module 24 interface components, which extends video and peripheral signals to two separate Velocitykvm-24 (stand alone) receiver destinations at separate workstation locations. Signals are routed through two Thinklogical VX160 routers.

6 KVM EXTENSION - Velocity T-Series Velocitykvm T-4200 Transmitter Chassis Equipped with One Module 4 TX and One Module 24 TX Interface - System Application Example Application Description: Two functional source computers connected to one Velocitykvm T-4200 transmitter chassis equipped with one module 4 interface component and one module 24 component, which extends video and peripheral signals to two separate Velocitykvm (stand alone) receiver destinations at separate workstation locations (Velocitykvm 4 and Velocitykvm 24). Signals are routed through two Thinklogical VX160 routers.

7 Velocitykvm T-4200 Transmitter and Receiver Chassis Each Equipped with an SDI Modules and Module 24 Interface - System Application Example Application Description: Two source computers one supporting DVI and the other supporting SDI video, located at separate workstations, connected to one Velocitykvm T-4200 transmitter chassis equipped with a Module 24 interface and a SDI Module interface, which extends both DVI and SDI video signals along with peripheral signals (up to 40 km.). A Velocitykvm T-4200 receiver is located at the destination. Signals are routed through two Thinklogical VX160 routers.

8 Specifications Video Resolution Module 4, 5 and 24: DVI-D all single-link DVI resolutions Module 5: RGB resolutions up to 1920 x 1080 Module 8: All single-link and dual-link DVI resolutions SDI Xtreme 3G+ Module: SMPTE 259, 292, 424, 372, 425 Level A and B Operating Temp C; ( F) Humidity 5-95% RH, non-condensing Dimensions Rack Size: EIA 19" Height: 1U-1.79 (45 mm) Depth: 14.02" (356 mm) Width: 17.49" (444 mm) (Tolerance: ±.039";.1000 mm) Weights Weight: 15 lbs (4.99 kg) per unit Shipping Weight: 30 lbs (12.25 kg) pair Power Consumption Optical Cable Optical Distance Compliance Warranty Connectors 35 watts per unit (2 modules) Single-mode and multi-mode over 4-6 fibers - CWDM available over single fiber Fiber is available, not supplied Up to 50 meters using 62.5/125um, type OM1; Up to 350 meters using 50/125um, type OM2 Up to 750 meters using 50/125um, type OM3; Up to 1000 meters using 50/125um, type OM4; Up to 40 kilometers using 9/125um, type OS2 (single-mode) Approvals for US, Canada, and European Union 12 months from date of shipment - extended warranties available Transmitter Receiver Video Module 4, 8 DVI-D (2) Video Module 4, 8 DVI-D (2) Module 5 DVI-I (2) Module 5 DVI-I (2) Module 24 DVI-D (4) Module 24 DVI-D (4) SDI Xtreme 3G+ BNC (2) SDI Xtreme 3G+ BNC (2) Audio MIC 3.5mm Jack Audio MIC 3.5mm Jack Audio LINE 3.5mm Jack Audio LINE 3.5mm Jack Serial Port DB9 Female Serial Port DB9 Male USB 1.0 (HID) USB B USB 1.0 (HID) USB A (4) USB 2.0 USB B USB 2.0 USB A (4) PS2 Keyboard MiniDIN 6 Female PS2 Keyboard MiniDIN 6 Female PS2 Mouse MiniDIN 6 Female PS2 Mouse MiniDIN 6 Female Software Updates USB B (2) Software Updates USB B (2) Fiber Connectors LC for Multi-Mode and Single-Mode Fiber Connectors LC for Multi-Mode and Single-Mode Cables Included: All required cables to connect a Cables Included: USB A to USB B cable, 1.8 meters computer to the transmitter USB A to USB B cable, 1.8 meters

9 1 Velocitykvm T-Series Ordering Information Part Number and Description Velocity T-4200 Chassis VTS Velocity T-4200 CHASSIS Velocity T-4200 Modules VTM-U00004-LCRX Velocity KVM T-Series Extender Receiver, Single Head Single Link DVI, USB 2.0, KMAS, LC VTM-U00004-LCTX Velocity KVM T-Series Extender Transmitter, Single Head Single Link DVI, USB 2.0, KMAS, LC VTM-U00005-LCRX Velocity KVM T-Series Extender Receiver, Single Head Single Link RGB/DVI, USB 2.0, KMAS, LC VTM-U00005-LCTX Velocity KVM T-Series Extender Transmitter, Single Head Single Link RGB/DVI, USB 2.0, KMAS, LC VTM-U00008-LCRX Velocity KVM T-Series Extender Receiver, Single Head Dual Link DVI, USB 2.0, KMAS, LC VTM-U00008-LCTX Velocity KVM T-Series Extender Transmitter, Single Head Dual Link DVI, USB 2.0, KMAS, LC VTM-U00024-LCRX Velocity KVM T-Series Extender Receiver, Dual Head Single Link DVI, USB 2.0, KMAS, LC VTM-U00024-LCTX Velocity KVM T-Series Extender Transmitter, Dual Head Single Link DVI, USB 2.0, KMAS, LC STM-C1C1X2-LCRX SDI Xtreme 3G Plus T-4200 Dual Receiver Module with Two SFPs and Two Pairs of SDI Outputs, LC STM-L1C1X2-LCTR SDI Xtreme 3G Plus T-4200 Transceiver Module, TX: One Input with Loop Out and One SFP, RX: 1 SFP and 2 SDI Outputs, LC STM-L1L1X2-LCTX SDI Xtreme 3G Plus T-4200 Dual Transmitter Module with Two Inputs with Two Loop Outs and Two SFPs, LC SINGLE MODE OPTICS OPTION VOP-S04 Velocity 4/5 T-Series Optics Option for Transmitter or Receiver, Single Mode, Three Fibers, 40KM, LC VOP-S06 Velocity 8/24 T-Series Optics Option for Transmitter or Receiver, Single Mode, Three Fibers, 40KM, LC MULTI-MODE OPTICS OPTION VOP-M19 Velocity 4/5 T-Series Optics Option for Transmitter or Receiver, Multi-Mode, 3 Fibers, 1000M, LC VOP-M30 Velocity 8/24 T-Series Optics Option for Transmitter or Receiver, Multi-Mode, 3 Fibers, 1000M, LC Extend Distribute Innovate 2011 Thinklogical. All rights reserved. Thinklogical, claims or other product information contained in this document are subject to change without notice. This document may not be reproduced, in whole or in part, without the express written consent of Thinklogical.! " # $ # % & ' ( ) * +, - # $. / 0.