Arista Xtender ARD-1001 Multi-input/output VGA Digital Extender

Transcription

1 Arista Xtender ARD-1001 Multi-input/output VGA Digital Extender The Arista Xtender ARD-1001 is a multi-input/output VGA video extender that extends video, mouse and serial signals up to 1,000 ft (300m) over a single CAT 5e/6 cable. ARD1001 supports VGA video at resolution up to 1920x1080 at 60Hz. Users can use serial touch, USB or PS/2 keyboard and mouse remotely. The ARD-1001 also incorporates gain and EQ rotary knobs, which let users fine tune the extended VGA signal to achieve the best display quality. Application Hospitality Hospital Resorts Control room Entertainment Venues and Events Public information Houses of Worship Digital Signage. Local and remote education Key Features Transmission distances of up to 1000 feet (300m). Local Host Support 24/50/60fps/1080p/1080i/720p/576p/576i/480p/480i VGA input. RS-232 IN USB UPSTREAM Using single CAT5e/6cable to extend digital signal, low-cost. VGA IN 1 VGA loop back at Tx. No software is required, easy installation, and supports plugand-play. Perfect image quality, strong anti-interference performance, image clarity and brightness are adjustable. VGA OUT LOCAL OUT POWER INDICATOR Supports RS-232 half-duplex. Adjustable equalization on remote display. Adjustable gain control on remote display. Remote Display De-skew compensation available for RGB delay control. Compact design. RS-232 USB VGA OUT DOWNSTREAM PS/2 KB, MOUSE Wall mounting/din-rail mounting for better stability. Supports PC, SUN, MAC or ELINX switch with VGA video. Multi-platform support: Windows, Solaris, Linux, FreeBSD, and MAC OS. Built-in lightning and surge protection. REMOTE IN EQ GAIN 0~7 - or + Super interference rejection.

2 Arista Xtender ARD-1001 Multi-input/output VGA Digital Extender Specifications Model Name ARD-1001 Technical Local Host Remote Display Role of usage Transmitter (TX) Receiver (RX) Input 1xVGA,1 x USB, 1xRS-232 1xRJ-45 Output 1xRJ-45, 1xVGA 1xVGA, 1xRS-232, Loop-Back 1xPS/2, 2xUSB Video bandwidth 350MHz Transimission FHD[1920x1080]-1000ft (300m) [CAT5e/6] Audio support No RS-232 signal type Half-duplex & baud rate Input video signal 1.2 Volts [peak-to-peak] Equalization Continuous analog control RGB delay control Yes Loop-Back 1 VGA loop-back at TX [1] Human body model ESD protection ±15kV [air-gap discharge] & ±8kV [contact discharge] [2] Core chipset ±8kV PCB stack-up 4-layer board [impedance control differential 100Ω; single 50Ω] VGA connector HD-15 [15-pin D-sub female] RJ-45 connector WE/SS 8P8C with 2 LED indicators RS-232 connector DB-9 [9-pin D-sub female] Keyboard and mouse connector PS/2 Connector USB connector USB 2.0 Type A connector Mechanical Mounting Wall mount or DIN-RAIL mount Dimension (LxWxH) xxinch/157x103x37mm Power supply 9V to 36V DC Operation consumption 5 Watts [max] Operation temperature 0~50 C (32~122 F) Storage temperature -20~60 C (-4~140 F) Relative humidity 20~90% RH [no condensation] Package Contents 1 x ARD-1001 Local Host 1 x ARD-1001 Remote Display 2 x VAC Input/12VDC Output power adapter (male to male) 1 x 6 feet modeling VGA cable (male to male) (male to female) Local Host Line Drawing Remote Display Line Drawing 2X X Φ35 [9] 8X Φ18 [5] 4X R.18 [5] 8X R.09 [2] Typical installation diagram Tx Rx

3 Arista Xtender ARD-1002 Multi-input/output HDMI Digital Extender The Arista XtenderTM ARD-1002 is a multi-input/output HDMI video /audio extender that extends video, audio, mouse, serial and IR signals up to 246 ft (75m) over a single CAT 5e/6 cable. ARD-1002 supports HDMI video at resolution up to Users can use serial touch, USB touch*, USB or PS/2 keyboard and mouse remotely. *USB touch is only supported in Windows HID. Application Hospitality Hospital Resorts Control room Entertainment Venues and Events Public information Houses of Worship Digital Signage. Local and remote education Key Features Local Host HDMI digital video and audio signal transmission distance up to 246ft (75m) via CAT5e/6. RS-232 IN USB UPSTREAM HDMI IN Support 24/50/60fps/1080p/1080i/720p/576p/576i/480p/480i HDMI input. Using single CAT5e/6cable to extend digital signal, low-cost. Supporting video, audio, DDC, and HDCP KEY extending together. 1 HDMI loop back at Tx. HDMI OUT LOCAL OUT Locking HDMI cable for better cable stability. No software required, easy installation, support hot-plug. Supports RS-232 full-duplex. Remote Display Supports USB or PS/2 keyboard and mouse. Compact design. RS-232 OUT USB HDMI OUT USB PS/2 OUT DOWNSTREAM Wall mounting/din-rail mounting for better stability. Supports a PC, SUN, MAC or some other devices with HDMI video. Multi-platform support: Windows, Solaris, Linux, FreeBSD, and MAC OS. Built-in lightning & surge protection. REMOTE IN Super interference rejection.

4 Arista Xtender ARD-1002 Multi-input/output HDMI Digital Extender Specifications Model Name ARD-1002 Technical Local Host Remote Display Role of usage Transmitter (TX) Receiver (RX) Input 1xHDMI, 1xUSB 1xRS-232 1xRJ-45, 1xIR Output 1xRJ-45, 1xIR 1xHDMI, 1xRS-232 1xHDMI Loop Back 1xPS/2 Jack, 2xUSB Video bandwidth 350MHz Transimission FHD[1920x1080]-246ft (75m) [CAT5e/6] Audio support Yes RS-232 signal type Full-duplex & baud rate Input video signal 1.2 Volts [peak-to-peak] Loop-out 1 HDMI loop-out at TX [1] Human body model ESD protection ±15kV [air-gap discharge] & ±8kV [contact discharge] [2] Core chipset ±8kV PCB stack-up 6-layer board [impedance control differential 100Ω; single 50Ω] HDMI connector Locking HDMI female cable RJ-45 connector WE/SS 8P8C with 2 LED indicators RS-232 connector DB-9 [9-pin D-sub female] Keyboard and mouse connector PS/2 Connector USB connector USB 2.0 Type A connector Mechanical Mounting Wall mount or DIN-RAIL mount Dimension (LxWxH) xxinch/157x103x37mm Power supply 9V to 36V DC Operation consumption 5 Watts [max] Operation temperature 0~50 C (32~122 F) Storage temperature -20~60 C (-4~140 F) Relative humidity 20~90% RH [no condensation] Package Contents 1 x ARD-1002 Local Host 1 x ARD-1002 Remote Display 2 x VAC Input/ 12VDC output power adapter (male to male) (male to female) 1 x 6 feet modeling HDMI cables (male to female) 1 x 6 feet USB Type A to Type A cable Local Host Line Drawing Remote Display Line Drawing X R.18 [5] 8X R.09 [2] 8X R.18 [5] 8X R.09 [2] Typical installation diagram

5 Arista Xtender ARD-1003 USB Digital Extender The Arista Xtender ARD-1003 is a USB extender that extends all types of USB 2.0 devices such as flash drives, keyboards, mice, webcams and interactive whiteboards up to 330 ft (100m) over a single CAT 5e/6 cable. No software needed, true plug-and-play. Application Remote Desktop Control room (keyboard/mouse) Extension Professional Audio-visual Security Surgical or medical imaging Industrial control and more Digital Signage control Key Features Local Host USB 2.0 signal transmission distance up to 330ft (100m). USB UPSTREAM 1 USB input and 4 USB inputs all in USB 2.0 Type A connecter. Using single CAT5/CAT5E/CAT6 cable to extend digital signal, low-cost. Supporting High-Speed, Full-Speed or Low-Speed USB2.0 device. LOCAL OUT No software required, easy installation, support hot-plug. Compact design. Wall mounting/din-rail mounting for better stability. Multi-platform support: Windows, Solaris, Linux, FreeBSD, and MAC OS. Remote Display Built-in lightning & surge protection. USB DOWNSTREAM REMOTE IN Super interference rejection.

6 Arista Xtender ARD-1003 USB Digital Extender Specifications Model Name ARD-1003 Technical Local Host Remote Display Role of usage Transmitter (TX) Receiver (RX) Input 1xUSB upstream 1xRJ-45 Output 1xRJ-45 4xUSB downstream USB device USB 1.0, USB 1.1, USB 2.0; Low-Speed, Full-Speed or High-Speed Transimission CAT5e/6 up to 330ft (100m) [1] Human body model ESD protection ±15kV [air-gap discharge] & ±8kV [contact discharge]; [2] Core chipset ±8kV PCB stack-up 6-layer board [impedance control differential 100Ω; single 50Ω] RJ-45 connector WE/SS 8P8C with 2 LED indicators Keyboard and mouse connector USB interface USB connector USB 2.0 Type A connector Mechanical Mounting Wall mount or DIN-RAIL mount Dimension (LxWxH) xxinch/157x103x37mm Power supply 9V to 36V DC Power consumption 5 Watts [max] Operation temperature 0~50 C (32~122 F) Storage temperature -20~60 C (-4~140 F) Relative humidity 20~90% RH [no condensation] Package Contents 1 x ARD-1003 Local Host; 1 x ARD-1003 Remote Display, 2 x 100~220VAC input / 12VDC output power adapter Local Host Line Drawing Remote Display Line Drawing [157.2] [143.6] X Φ35 [9] 8X Φ18 [4,5] 4X R.18 [4,5] 4X R.09 [2,3] Typical installation diagram

7 Arista Xtender ARD-1004 Multi-input/output HDMI Digital Extender over fiber The Arista Xtender ARD-1004 is a multi-input/output HDMI video /audio extender that extends video, audio, mouse, and serial signals up to 10,000 ft (3km) over a single fiber cable. ARD-1004 supports HDMI video at resolution up to 1920x1080 at 60Hz. Users can use serial touch, USB or PS/2 keyboard and mouse remotely. Application Rental & Staging Auditoriums Stadiums and Theaters Public transportation hubs Distance learning Surgical or medical imaging and more Local Host Remote Display RS-232 IN RS-232 USB UPSTREAM HDMI LOCAL Out HDMI OUT USB PS/2 DOWNSTREAM FIBER IN FIBER OUT LINK LED LINK LED HDMI IN Key Features HDMI signal transmission distances of up to 10,000ft (3km). Supports 24/50/60fps/1080p/1080i/720p/576p/576i/480p/480i HDMI signal input. Locking HDMI cable for better cable stability. Using single optical fiber cable to extend digital signal, lowcost, faster transmission rate and smaller attenuation. Supports video, audio, DDC, and HDCP KEY extending together. 1 HDMI loop back at Tx. Locking HDMI cable for better cable stability. Supports the touch screen and keyboard/mouse signal transmission. No software is required, easy installation, supports hot-plug and RS-232 full-duplex. Compact design. Wall mounting/din-rail mounting for better stability. Supports a PC, SUN, MAC or other devices with HDMI video. Multi-platform support: Windows, Solaris, Linux, FreeBSD, and MAC OS. Built-in lightning & surge protection, super interference rejection.

8 Arista Xtender ARD-1004 Multi-input/output HDMI Digital Extender over fiber Specifications Model Name ARD-1004 Technical Local Host Remote Display Role of usage Transmitter (TX) Receiver (RX) Input 1x HDMI, 1xUSB, 1x RS-232 1xOptical port Output 1x Optical port, 1x HDMI, 1xRS-232, 1x HDMI Loop-Back 1x PS/2, 2xUSB Video bandwidth 350MHz Transimission FHD 1920x ,000ft (3km) [Optical fiber cable] Audio support Yes RS-232 signal type Full-duplex & baud rate Input video signal 1.2 Volts [peak-to-peak] Loop-out 1 HDMI loop-out at TX [1] Human body model ±15kV [air-gap discharge] ESD protection & ±8kV [contact discharge] [2] Core chipset ±8kV 6-layer board [impedance control PCB stack-up differential 100Ω; single 50Ω] HDMI connector Locking HDMI female cable Optical connector SFP standard, Dual-mode, 10G RS-232 connector DB-9 [9-pin D-sub female] Keyboard and mouse connector PS/2 connector USB connector USB 2.0 Type A connector Mechanical Mounting Wall mount or DIN-RAIL mount Dimension (LxWxH) xxinch/157x103x37mm Power supply 9V to 36V DC Operation consumption 5 Watts [max] Operation temperature 0~50 C (32~122 F) Storage temperature -20~60 C (-4~140 F) Relative humidity 20~90% RH [no condensation] Package Contents 1 x ARD-1004 Local Host; 1 x ARD-1004 Remote Display, 2 x 100~220VAC input / 12VDC output power adapter (male to male) (male to female) 1 x 6 feet modeling HDMI cables (male to female) 1 x 6 feet USB Type A to Type A cable Local Host Line Drawing Remote Display Line Drawing X Φ35 [9] 8X Φ18 [4,5] 4X Φ35 [9] 8X Φ18 [4,5] Typical installation diagram Tx Rx

9 Arista Xtender ARD-1005 DVI Digital Extender with PoE The Arista XtenderTM ARD-1005 is a DVI/HDMI video/audio extender that extends video and audio signals up to 246 ft (75m) over a single CAT 5e/6 cable and is PoE powered. ARD-1005 supports DVI video signal, and HDMI video signal* at resolution up to 1920x1080 at 60Hz. * through adapter. No audio signal. Application Hospitality Resorts Entertainment Venues and Events Houses of Worship Local and remote education Hospital Control room Public information Digital Signage. Key Features LOCAL DVI IN DVI OUT OUTPUT REMOTE IN DVI signal transmission distances of up to 246ft (75m). Power over Ethernet. Supports 24/50/60fps/1080p/1080i/720p/576p/576i/480p/480i signal input. Just using a CAT5E/CAT6 LAN cable to extend digital signal, low-cost, faster transmission rate and smaller attenuation. Compact design. Supports video, audio, DDC, and HDCP KEY extending together. No software is required, easy to use, supports hot-plug. Simply insert into device for better stability Supports a PC, SUN, MAC or other devices with DVI signal video. Multi-platform support: Windows, Solaris, Linux, FreeBSD, and MAC OS. Built-in lightning & surge protection, super interference rejection.

10 Arista Xtender ARD-1005 DVI Digital Extender with PoE Specifications Model Name ARD-1005 Technical Local Host Remote Display Role of usage Transmitter (TX) Receiver (RX) Input 1xLocal DVI IN 1xDC 48V Input 1xRemote RJ-45 IN Output 1xLocal RJ-45 1xRemote DVI OUT Video bandwidth 350MHz Transimission FHD 1920x ft (75m) [CAT5e/6] Audio support No Input video signal 1.2 Volts [peak-to-peak] [1] Human body model ±15kV [air-gap discharge] & ESD protection ±8kV [contact discharge]; [2] Core chipset ±8kV PCB stack-up 6-layer board [impedance control differential 100Ω; single 50Ω] Mechanical Dimension (LxWxH) 3.80 x 3.99 x 1.02 inch / 96.5 x x 26.0 mm Power supply 48V Power consumption 5 Watts [max] Operation temperature 0~50 C (32~122 F) Storage temperature -20~60 C (-4~140 F) Relative humidity 20~90% RH [no condensation] Package Contents 1 x ARD-1005 Local Host; 1 x ARD-1005 Remote Display, 1 x 48VDC output power adapter Local Host Line Drawing Remote Display Line Drawing 1.02 [26] 1.02 [26].78 [19,8] 1.81 [46].78 [19,8] 1.81 [46] 2.46 [62,5] 2.46 [62,5] 1,01 [25,6] 3.99 [101,3] 3.99 [101,3] 2.20 [55,9] 2,20 [55,9] 3,33 [84,5] 3.33 [84,5] 3,80 [96,5] 3.80 [96,5] Typical installation diagram Tx Rx