16 x 2 Character LCD

Size: px

Start display at page:

Download "16 x 2 Character LCD"

Elizabeth Evans
5 years ago
Views:

LCD-16N2B-YYH-ETV 16 x 2 Character LCD FEATURES Type: character Display format: 16 x 2 characters Built-in controller: ST766U (or equivalent) Duty cycle: 1/16 5 x 8 dots includes cursor + 3 V power

1 LCD-16N2B-YYH-ETV 16 x 2 Character LCD FEATURES Type: character Display format: 16 x 2 characters Built-in controller: ST766U (or equivalent) Duty cycle: 1/16 5 x 8 dots includes cursor + 3 V power supply LED can be driven by pin 1, pin 2, or A and K Material categorization: for definitions of compliance please see MECHANICAL DATA ITEM STANDARD VALUE UNIT Module Dimension 8. x 36. x 13.2 (max.) Viewing Area 66. x 16. Dot Size.55 x.65 Dot Pitch.6 x.7 mm Mounting Hole 75. x 31. Character Size 2.95 x 5.55 ABSOLUTE MAXIMUM RATINGS STANDARD VALUE ITEM SYMBOL MIN. TYP. MAX. Power Supply V DD to V SS Input Voltage V I V SS - V DD Note V SS = V, V DD = 3. V UNIT V ELECTRICAL CHARACTERISTICS STANDARD VALUE ITEM SYMBOL CONDITION MIN. TYP. MAX. UNIT Input Voltage V DD V DD = + 3 V V Supply Current I DD V DD = + 3 V ma - 2 C Recommended LC Driving Voltage for Normal Temperature Version Module V DD to V C 25 C 5 C V 7 C LED Forward Voltage V F 25 C V LED Forward Current I F V = 4.1 V ma EL Power Supply Current I EL V EL = 11 V AC, 4 Hz ma DISPLAY CHARACTER ADDRESS CODE Display Position DD Address A B C D E F DD Address A 4B 4C 4D 4E 4F Revision: 6-Feb-15 1 Document Number: ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT

2 LCD-16N2B-YYH-ETV INTERFACE PIN FUNCTION PIN NO. SYMBOL FUNCTION 1 V SS Ground 2 V DD Supply voltage for logic 3 V Operating voltage for LCD (variable) 4 RS H: data / L: instruction code 5 R / W H: read (MPU module) / L: write (MPU module) 6 E H, H L chip enable signal 7 DB Data bus line 8 DB1 Data bus line 9 DB2 Data bus line 1 DB3 Data bus line 11 DB4 Data bus line 12 DB5 Data bus line 13 DB6 Data bus line 14 DB7 Data bus line 15 V EE Negative voltage output 16 NC No connection DIMENSIONS in millimeters ± (VA) (AA) 8. P4 x 15 = x Ø 1. PTH max ± (VA) 11.5 (AA) K A 4 x Ø x Ø PTH 4 x Ø 5. PAD 1.6 LED B/L The non-specified tolerance of dimension is ±.3 mm..4 DOT SIZE SCALE 5/1 Revision: 6-Feb-15 2 Document Number: ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT

3 LCD-16N2B-YYH-ETV 1.Module Classification Information LC D -16 N 2 B -Y Y H -ETV 1. Brand Intertechnology, Inc. 2. Horizontal Format: 16 characters 3. Display TypeNCharacter Type, HGraphic Type 4. Vertical Format: 2 Lines 5. Model serials no.: B 6. Backlight Type NWithout backlight BEL, Blue green DEL, Green WEL, White FCCFL, White YLED, Yellow Green TLED, White ALED, Amber RLED, Red OLED, Orange GLED, Green 7. LCD Mode BTN Positive, Gray TFSTN Negative NTN Negative, GSTN Positive, Gray YSTN Positive, Yellow Green MSTN Negative, Blue FFSTN Positive 8. LCD Polarize Type/ Temperature range/ View direction AReflective, N.T, 6: DReflective, N.T, 12: GReflective, W. T, 6: JReflective, W. T, 12: BTransflective, N.T,6: ETransflective, N.T.12: 9. Special Code ET : English and European standard font V : Build in Negative Voltage HTransflective, W.T,6: KTransflective, W.T,12: CTransmissive, N.T,6: FTransmissive, N.T,12: ITransmissive, W. T, 6: LTransmissive, W.T,12: Note: Compliant with the RoHS Directions and regulations Revision: 6-Feb-15 3 Document Number: ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT

4 LCD-16N2B-YYH-ETV 2.Precautions in use of LCD Modules (1)Avoid applying excessive shocks to the module or making any alterations or modifications to it. (2)Don t make extra holes on the printed circuit board, modify its shape or change the components of LCD module. (3)Don t disassemble the LCM. (4)Don t operate it above the absolute maximum rating. (5)Don t drop, bend or twist LCM. (6)Soldering: only to the I/O terminals. (7)Storage: please storage in anti-static electricity container and clean environment. (8). Supplier has the right to change the passive components (9). Supplier has the right to change the PCB Rev. 3.General Specification Item Dimension Unit Number of Characters 16 characters x 2 Lines Module dimension 8. x 36. x 13.2(MAX) mm View area 66. x 16. mm Active area 56.2 x 11.5 mm Dot size.55 x.65 mm Dot pitch.6 x.7 mm Character size 2.95 x 5.55 mm Character pitch 3.55 x 5.95 mm LCD type STN Positive, Yellow Green Transflective Duty 1/16 View direction Backlight Type 6 o clock LED Yellow Green Revision: 6-Feb-15 4 Document Number: ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT

5 LCD-16N2B-YYH-ETV 4.Absolute Maximum Ratings Item Symbol Min Typ Max Unit Operating Temperature TOP Storage Temperature TST Input Voltage VI VSS VDD V Supply Voltage For Logic VDD-VSS V Supply Voltage For LCD VDD-V V 5.Electrical Characteristics Item Symbol Condition Min Typ Max Unit Supply Voltage For Logic Supply Voltage For LCD VDD-VSS V Ta= V VDD-V Ta= V Ta=7 3.2 V Input High Volt. VIH.7 VDD VDD V Input Low Volt. VIL VSS.6 V Output High Volt. VOH.7 V Output Low Volt. VOL.2 V Supply Current IDD VDD=3.V ma Revision: 6-Feb-15 5 Document Number: ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT

6 LCD-16N2B-YYH-ETV 6.Optical Characteristics Item Symbol Condition Min Typ Max Unit View Angle (V) CR2 2 4 deg (H) CR2-3 3 deg Contrast Ratio CR 3 Response Time T rise 15 2 ms T fall 15 2 ms Definition of Operation Voltage (Vop) Definition of Response Time ( Tr, Tf ) Intensity 1 Selected Wave Non-selected Wave Non-selected Conition Intensity Selected Conition Non-selected Conition 1 Cr Max Cr = Lon / Loff 1 9 Conditions : Vop Driving Voltage(V) [positive type] Operating Voltage : Vop Frame Frequency : 64 HZ Tr Tf [positive type] Viewing Angle() : Driving Waveform : 1/N duty, 1/a bias Definition of viewing angle(cr2) f l b r = 18 = 27 = 9 = Revision: 6-Feb-15 6 Document Number: ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT

7 LCD-16N2B-YYH-ETV 7.Interface Pin Function Pin No. Symbol Level Description 1 VSS V Ground 2 VDD 3.V Supply Voltage for logic 3 VO (Variable) Operating voltage for LCD 4 RS H/L H: DATA, L: Instruction code 5 R/W H/L H: Read(MPUModule) L: Write(MPUModule) 6 E H,HL Chip enable signal 7 DB H/L Data bus line 8 DB1 H/L Data bus line 9 DB2 H/L Data bus line 1 DB3 H/L Data bus line 11 DB4 H/L Data bus line 12 DB5 H/L Data bus line 13 DB6 H/L Data bus line 14 DB7 H/L Data bus line 15 VEE Negative Voltage output 16 NC NC Revision: 6-Feb-15 7 Document Number: ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT

8 LCD-16N2B-YYH-ETV 8.Contour Drawing &Block Diagram (VA) 11.5(AA) (VA) (AA) 8. P4*15= PTH 1 K A PTH 4-5. PAD 13.2Max LED B/L Vss Vdd Vo RS R/W E DB DB1 DB2 DB3 DB4 DB5 DB6 DB7 VEE NC The non-specified tolerance of dimension is.3mm..4 DOT SIZE SCALE 5/1 Revision: 6-Feb-15 8 Document Number: ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT

9 LCD-16N2B-YYH-ETV 9.Function Description The LCD display Module is built in a LSI controller, the controller has two 8-bit registers, an instruction register (IR) and a data register (DR). The IR stores instruction codes, such as display clear and cursor shift, and address information for display data (DD) and character generator (). The IR can only be written from the MPU. The DR temporarily stores data to be written or read from DD or. When address information is written into the IR, then data is stored into the DR from DD or. By the register selector (RS) signal, these two registers can be selected. RS R/W Operation IR write as an internal operation (display clear, etc.) 1 Read busy flag (DB7) and address counter (DB to DB7) 1 Write data to DD or (DR to DD or ) 1 1 Read data from DD or (DD or to DR) Busy Flag (BF) When the busy flag is 1, the controller LSI is in the internal operation mode, and the next instruction will not be accepted. When RS= and R/W=1, the busy flag is output to DB7. The next instruction must be written after ensuring that the busy flag is. Address Counter (AC) The address counter (AC) assigns addresses to both DD and Display Data (DD) This DD is used to store the display data represented in 8-bit character codes. Its extended capacity is 88 bits or 8 characters. Below figure is the relationships between DD addresses and positions on the liquid crystal display. High bits Low bits Example: DD addresses 4E AC (hexadecimal) AC6 AC5 AC4 AC3 AC2 AC1 AC Revision: 6-Feb-15 9 Document Number: ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT

10 LCD-16N2B-YYH-ETV Display position DD address A B C D E F A 4B 4C 4D 4E 4F 2-Line by 16-Character Display Character Generator ROM (ROM) The ROM generate 58 dot or 51 dot character patterns from 8-bit character codes. See Table 2. Character Generator () In, the user can rewrite character by program. For 58 dots, eight character patterns can be written, and for 51 dots, four character patterns can be written. Write into DD the character code at the addresses shown as the left column of table 1. To show the character patterns stored in. Revision: 6-Feb-15 1 Document Number: ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT

11 LCD-16N2B-YYH-ETV Relationship between Addresses, Character Codes (DD) and Character patterns Table 1. For 5 * 8 dot character patterns Character Codes ( DD data ) Address Character Patterns ( data ) High Low High Low High Low * * * 1 * * * 1 * * * 1 1 * * * * 1 * * * 1 1 * * * 1 1 * * * * * * * * * 1 * * * 1 * * * 1 1 * * * * * * * 1 1 * * * 1 1 * * * * * * * * * 1 Character pattern( 1 ) Cursor pattern Character pattern( 2 ) Cursor pattern * For 5 * 1 dot character patterns Character Codes ( DD data ) Address * * * Character Patterns ( data ) High Low * High Low High Low * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * Character pattern Cursor pattern : " High " * * * * * * * * Revision: 6-Feb Document Number: ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT

12 LCD-16N2B-YYH-ETV 1.Character Generator ROM Pattern Table.2 Upper 4 bit Lower 4 bit LLLL LLLH LLHL LLHH LHLL LHLH LHHL LHHH HLLL HLLH HLHL HLHH HHLL HHLH HHHL HHHH LLLL LLLH LLHL LLHH LHLL LHLH LHHL LHHH HLLL HLLH HLHL HLHH HHLL HHLH HHHL HHHH ( 1 ) ( 2 ) ( 3 ) ( 4 ) ( 5 ) ( 6 ) ( 7 ) ( 8 ) ( 1 ) ( 2 ) ( 3 ) ( 4 ) ( 5 ) ( 6 ) ( 7 ) ( 8 ) Revision: 6-Feb Document Number: ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT

13 LCD-16N2B-YYH-ETV 11.Instruction Table Instruction Instruction Code RS R/W DB7 DB6 DB5 DB4 DB3 DB2 DB1 DB Description Execution time (fosc=27khz) Clear Display 1 Write H to DD and set DD address to H from AC 1.53ms Return Home 1 Entry Mode Set Display ON/OFF Control Cursor or Display Shift 1 I/D SH 1 D C B 1 S/C R/L Function Set 1 DL N F Set Address Set DD Address Read Busy Flag and Address Write Data to Read Data from Set DD address to H from AC and return cursor to its original position if shifted. The contents of DD are not changed. Assign cursor moving direction and enable the shift of entire display. Set display (D), cursor (C), and blinking of cursor (B) on/off control bit. Set cursor moving and display shift control bit, and the direction, without changing of DD data. Set interface data length (DL:8-bit/4-bit), numbers of display line (N:2-line/1-line)and, display font type (F:511 dots/58 dots) 1.53ms 39s 39s 39s 39s 1 AC5 AC4 AC3 AC2 AC1 AC Set address in address counter. 39s 1 AC6 AC5 AC4 AC3 AC2 AC1 AC Set DD address in address counter. 39s Whether during internal operation or not 1 can be known by reading BF. The BF AC6 AC5 AC4 AC3 AC2 AC1 AC contents of address counter can also be read. 1 D7 D6 D5 D4 D3 D2 D1 D 1 1 D7 D6 D5 D4 D3 D2 D1 D Write data into internal (DD/). Read data from internal (DD/). s 43s 43s don t care Revision: 6-Feb Document Number: ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT

14 LCD-16N2B-YYH-ETV 12.Timing Characteristics 12.1 Write Operation Ta=25, VDD=2.7V Item Symbol Min Typ Max Unit Enable cycle time TC 12 ns Enable pulse width (high level) T PW 46 ns Enable rise/fall time T R,T F 25 ns Address set-up time (RS, R/W to E) tas ns Address hold time tah 1 ns Data set-up time tdsw 8 ns Data hold time th 1 ns Revision: 6-Feb Document Number: ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT

15 LCD-16N2B-YYH-ETV 12.2 Read Operation Item Symbol Min Typ Max Unit Enable cycle time TC 12 ns Ta=25, VDD=2.7V Enable pulse width (high level) T PW 48 ns Enable rise/fall time T R,T F 25 ns Address set-up time (RS, R/W to E) tas ns Address hold time tah 1 ns Data delay time tddr 32 ns Data hold time th 1 ns Revision: 6-Feb Document Number: ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT

16 LCD-16N2B-YYH-ETV 13.Initializing of LCM Power on Wait for more than 4 ms after VDD rises to 4.5 V RS R/W DB7 DB6 DB5 DB4 DB3 1 1 * DB2 * DB1 * DB * BF can not be checked before this instruction. Function set Wait for more than 39us RS R/W DB7 DB6 DB5 DB4 DB3 DB2 DB1 DB 1 * * * * N F * * * * * * BF can not be checked before this instruction. Function set Wait for more than 39 s RS R/W DB7 DB6 DB5 DB4 DB3 DB2 DB1 DB BF can not be checked before this instruction. 1 * * * * N F * * * * * * Function set Wait for more than 37us RS R/W DB7 1 DB6 D DB5 C DB4 B DB3 * * DB2 * * DB1 * * DB * * Display ON/OFF control Wait for more than 37 s RS R/W DB7 DB6 DB5 DB4 DB3 DB2 DB1 DB * * * * 1 * * * * Display Clear Wait for more than 1ms RS R/W DB7 DB6 DB5 DB4 DB3 DB2 DB1 DB Entry Mode Set * * * * 1 I/D SH * * * * Initialization ends 4-Bit Ineterface Revision: 6-Feb Document Number: ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT

17 LCD-16N2B-YYH-ETV Power on Wait for more than 4 ms after VDD rises to 4.5 V RS R/W DB7 DB6 DB5 DB4 DB3 DB2 DB1 DB 1 1 N F * * BF can not be checked before this instruction. Function set Wait for more than 39us RS R/WDB7 DB6 DB5 1 DB4 DB3 DB2 DB1 DB 1 N F * * BF can not be checked before this instruction. Function set Wait for more than 37us RS R/W DB7 DB6 DB5 DB4 DB3 DB2 DB1 DB Display ON/OFF control 1 B C D Wait for more than 37 s RS R/W DB7 DB6 DB5 DB4 DB3 DB2 DB1 DB 1 Display Clear Wait for more than 1ms RS R/W DB7 DB6 DB5 DB4 DB3 DB2 DB1 DB Entry Mode Set 1 I/D S Initialization ends 8-Bit Ineterface Revision: 6-Feb Document Number: ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT

18 LCD-16N2B-YYH-ETV 14.Reliability Content of Reliability Test (wide temperature, -2~7) Environmental Test Test Item Content of Test Test Condition Note High Temperature Endurance test applying the high storage 8 storage temperature for a long time. 2hrs 2 Low Temperature Endurance test applying the high storage -3 storage temperature for a long time. 2hrs 1,2 Endurance test applying the electric stress High Temperature 7 (Voltage & Current) and the thermal stress to the Operation element for a long time. 2hrs Low Temperature Operation High Temperature/ Humidity Operation Thermal shock resistance Vibration test Static electricity test Endurance test applying the electric stress under low temperature for a long time. The module should be allowed to stand at 6,9%RH max For 96hrs under no-load condition excluding the polarizer, Then taking it out and drying it at normal temperature. The sample should be allowed stand the following 1 cycles of operation min 5min 3min 1 cycle Endurance test applying the vibration during transportation and using. Endurance test applying the electric stress to the terminal. -2 2hrs 6,9%RH 96hrs -2/7 1 cycles Total fixed amplitude :1.5mm Vibration Frequency : 1~55Hz One cycle 6 seconds to 3 directions of X,Y,Z for Each 15 minutes VS=8V,RS=1.5k CS=1pF 1 time Note1: No dew condensation to be observed. Note2: The function test shall be conducted after 4 hours storage at the normal Temperature and humidity after remove from the test chamber. Note3: Vibration test will be conducted to the product itself without putting it in a container. 1 1,2 3 Revision: 6-Feb Document Number: ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT

19 LCD-16N2B-YYH-ETV 15.Backlight Information Specification PAETER SYMBOL MIN TYP MAX UNIT TEST CONDITION Supply Current ILED ma V=4.2V Supply Voltage V V Reverse Voltage VR 8 V Luminous Intensity IV CD/M 2 ILED=13mA Wave Length p nm ILED=13mA Life Time 1 Hr. ILED13mA Color Yellow Green Note: The LED of B/L is drive by current only, drive voltage is for reference only. Drive voltage can make driving current under safety area (current between minimum and maximum). R LED B\L Drive Method 1.Drive from A, K A K B/L Revision: 6-Feb Document Number: ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT

20 LCD-16N2B-YYH-ETV 16. Inspection specification NO Item Criterion AQL 1 Electrical Testing 1.1 Missing vertical, horizontal segment, segment contrast defect. 1.2 Missing character, dot or icon. 1.3 Display malfunction. 1.4 No function or no display. 1.5 Current consumption exceeds product specifications. 1.6 LCD viewing angle defect. 1.7 Mixed product types. 1.8 Contrast defect Black or white spots on LCD (display only) 2.1 White and black spots on display.25mm, no more than three white or black spots present. 2.2 Densely spaced: No more than two spots or lines within 3mm 3 LCD black spots, white spots, contamination (non-display) 3.1 Round type : As following drawing 3.2 Line type : (As following drawing) Length Width Acceptable Q TY --- W Accept no dense L L.2W.3W W As round type 4 Polarizer bubbles If bubbles are visible, judge using black spot specifications, not easy to find, must check in specify direction. Size Acceptable Q TY Accept no dense 3 2 Total Q TY 3 Revision: 6-Feb-15 2 Document Number: ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT

21 LCD-16N2B-YYH-ETV NO Item Criterion AQL 5 Scratches Follow NO.3 LCD black spots, white spots, contamination Symbols Define: x: Chip length y: Chip width z: Chip thickness k: Seal width t: Glass thickness a: LCD side length L: Electrode pad length: 6.1 General glass chip : Chip on panel surface and crack between panels: 6 Chipped glass Revision: 6-Feb Document Number: ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT

LCD-16N2B-YYH-ETV NO Item Criterion x: Chip length y: Chip width z: Chip thickness k: Seal width t: Glass thickness a: LCD side length L: Electrode pad length 6.

22 LCD-16N2B-YYH-ETV NO Item Criterion x: Chip length y: Chip width z: Chip thickness k: Seal width t: Glass thickness a: LCD side length L: Electrode pad length 6.2 Protrusion over terminal : Chip on electrode pad : AQL 6 Glass crack Revision: 6-Feb Document Number: ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT

23 LCD-16N2B-YYH-ETV NO Item Criterion AQL 7 Cracked glass 8 Backlight elements 9 Bezel 1 PCBCOB The height of the COB should not exceed the height indicated in the assembly diagram. 1.4 There may not be more than 2mm of sealant outside the seal area on the PCB. And there should be no more than three places. 1.5 No oxidation or contamination PCB terminals. 1.6 Parts on PCB must be the same as on the production characteristic chart. There should be no wrong parts, missing parts or excess parts. 1.7 The jumper on the PCB should conform to the product characteristic chart. 1.8 If solder gets on bezel tab pads, LED pad, zebra pad or screw hold pad, make sure it is smoothed down. The Scraping testing standard for Copper Coating of PCB Soldering X Y X * Y<=2mm 2.65 Revision: 6-Feb Document Number: ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT

24 LCD-16N2B-YYH-ETV NO Item Criterion AQL.65 General 12 appearance Revision: 6-Feb Document Number: ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT

25 LCD-16N2B-YYH-ETV 17. Material List of Components for RoHS 1. Declaration that all of or part of products (with the mark N in code), including, but not limited to, the LCM, accessories or packages, manufactured and/or delivered to your company (including your subsidiaries and affiliated company) directly or indirectly by our company (including our subsidiaries or affiliated companies) do not intentionally contain any of the substances listed in all applicable EU directives and regulations, including the following substances. Exhibit AThe Harmful Material List Material (Cd) (Pb) (Hg) (Cr6+) PBBs PBDEs Limited Value ppm ppm ppm ppm ppm ppm Above limited value is set up according to RoHS. 2.Process for RoHS requirement (1) Use the Sn/Ag/Cu soldering surfacethe surface of Pb-free solder is rougher than we used before. (2) Heat-resistance temp. Reflow25, 3 seconds Max. Connector soldering wave or hand soldering32, 1 seconds max. (3) Temp. curve of reflow, max. Temp.235±5 Recommended customer s soldering temp. of connector28, 3 seconds. Revision: 6-Feb Document Number: ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT

26 Legal Disclaimer Notice Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, ), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on s knowledge of typical requirements that are often placed on products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer s technical experts. Product specifications do not expand or otherwise modify s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the product could result in personal injury or death. Customers using or selling products not expressly indicated for use in such applications do so at their own risk. Please contact authorized personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of. Product names and markings noted herein may be trademarks of their respective owners. 217 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 8-Feb-17 1 Document Number: 91

Number of Characters 20 characters x 4Lines - Module dimension 98.0 x 60.0 x 13.6(MAX) mm. View area 77.0 x 25.2 mm. Active area 70.4 x 20.

Number of Characters 20 characters x 4Lines - Module dimension 98.0 x 60.0 x 13.6(MAX) mm. View area 77.0 x 25.2 mm. Active area 70.4 x 20. 2.Precautions in use of LCD Modules (1)Avoid applying excessive shocks to the module or making any alterations or modifications to it. (2)Don t make extra holes on the printed circuit board, modify its