The Tracking Magnet EVO Recessed High-tech LED lighting system for interior architecture

Transcription

1 Description The new Tracking Magnet 8V system is creative, flexible, reliable and precise. Accent luminaires are installed by a magnetic fastening system and a secondary mechanical fastener. The range of luminaires is composed of accent illumination modules with different optics and linear luminaires with the Flos signature design. The extruded aluminum housing creates a clean 0.6 slot that can be run up, around and across walls and ceilings. The Tracking Magnet is available in recessed, surface, or pendant mounted applications, making it an option in even the most varied of job conditions. Vertical and horizontal corners complete the system. The Tracking Magnet is perfect for retail displays where frequent changes are typical and absolute performance is required. Lamps Spot 0: Power LED.W, 86lm, 700K, CRI.W, 07lm, 000K, CRI Spot : Power LED 8.W, 60lm, 700K, CRI 8.W, 66lm, 000K, CRI Spot 0: Power LED W, 7lm, 700k, CRI W, 779lm, 000K, CRI Spot 0: LED Array.W, 07lm, 700k, CRI.W, 8lm, 000K, CRI Spot 0: LED Array.W, 000lm, 700k, CRI.W, 0lm, 000K, CRI Light Stripe 6W, lm, 000K, CRI W, 80lm, 000K, CRI 8W, 770lm, 000K, CRI W, 60lm, 000K, CRI 0W, lm, 000K, CRI 6W, 8lm, 700K, CRI W, lm, 700K, CRI 8W, 67lm, 700K, CRI W, 0lm, 700K, CRI 0W, 788lm, 700K, CRI Notes All available accessories for the spot modules come with the product, except Spot 0. Fixture heads all rotate and tilt from nadir Listings: UL Listed, IP 0 protection grade, Class Construction Track profiles can be field cut. Electrical 8V electrical system. Powered by remote listed Class power supply System is limited to a maximum power current of 6.6A Wattage per linear foot is dependent upon quantity and type of light modules used Spot and linear luminaires available with individually addressable DALI-Wireless circuitry, 0-0V (from 0% up to 00%) Dimming or built-in dimmer on each fixture head (from 0% up to 00%) Recessed Track Trimless extruded aluminum track to be recessed in sheet rock ceilings and walls /8 thick Available lengths: 9., 9, 78.7 and 98. Feed connector, intermediated connector and end-caps to be ordered separately Corners are not field cuttable Track is powered through straight feed sections only. Flexible Intermediate connector to be ordered separately if electrical continuity on corners is required Permanent or adjustable fastening kits available (optional). The fastening kits permit installation independant of the profile flanges. Recommended for installations where the Tracking Magnet cannot be installed before the suspended plasterboard ceiling. Photometrics For current IES files please visit architectural.flosusa.com Warranty years from date of sale O York Street Brooklyn, NY 0 (78) Specifications and dimensions subject to change without notice. Issued Page of

2 Luminaries Light Stripe Spot 0 Spot Spot 0 Spot 0 Accent LED spot modules can be rapidly exchanged and repositioned without tools. Light elements are quick to position and connect automatically through the magic of magnets and a security mechanical fastening element. Spot and linear luminaires available with individually addressable DALI-Wireless circuit, 0-0V Dimming (from 0% up to 00%) or built-in dimmer (from 0% up to 00%) on each fixture head. All available accessories for the spot modules come with the product, except Spot 0.. Tracks Electromechanical track for recessed installation in plasterboard ceilings and walls, available in lengths: 9.", 9", 78.7" and 98." Feed connector, intermediate connector and end-caps to be ordered separately. Fixed or adjustable fastening kits available (optional). The fastening kits for the roof permit installing without using aluminum fastening profiles. Recommended for installations where the Tracking Magnet can be installed before the suspended plasterboard ceiling. How to specify: L: Length On Board Dimmer DALI / 0V Finish L '' 9. (m) 9 (.m) 78.7 (m) 98, (.m) Note: Track can be cut to different lengths in field Corners Horizontal corners available for turns in the same plane, inside corner to transition from wall to ceiling or from wall to wall and external corners to transition from wall to wall surfaces. Corner can not be used for feeding. Intermediate flexible connector to be ordered separately if electrical continuity on corners is required. Corners do not allow installation of spots. Horizontal º corner Inside Corner Outside Corner O York Street Brooklyn, NY 0 (78) Specifications and dimensions subject to change without notice. Issued Page of

3 Required Ceiling Kits End Caps ( units) Optional Ceiling Kits For installation on ACT or wood ceiling. Consult factory for other ceiling types. Fixed Ceiling Kits ( units) Adjustable Ceiling Kits ( units) Profile (mm) 000/00 [9.7 / 9.06 ] 000/00 [78.7"/98."] Quantities Ceiling Kit (units) Required Connectors Image QTY Item Number Description Drawing Feed connector Intermediate Straight connector To be ordered separately if electrical continuity straight tracks is required Flexible/Electrical Intermediate Corner To be ordered separately if electrical continuity on corners is required O York Street Brooklyn, NY 0 (78) Specifications and dimensions subject to change without notice. Issued Page of

4 Dimming controllers Image QTY Item Number Description Drawing Gateway Bluetooth DALI. To be use with the FLOS SMART Control App, DALI fixtures and dimmable tracks gateway can control up to 6 fixtures connected to the same data chanel. 6, Dimming Control Unit Box V-8V -0V Required for a 0-0V Dimming installation. Dimmingo control can control up to 0 fixtures., 0.66 Required Drivers Image QTY Item Number Description Drawing LEDSB96W8V-NDM-D0 LED power supply source for remote installation, 8V/96W Magnitude, UL Listed. 7.. LEDSB60W8V-NDM-D0 LED power supply source for remote installation, 8V/60W Magnitude, UL Listed LEDSB0W8V-NDM-D0 LED power supply source for remote installation, 8V/0W Magnitude, UL Listed LEDSB96W8V-NDM-U0 LED power supply source for remote installation, 8V/96W ERP, UL Listed LEDSB60W8V-NDM-U0 LED power supply source for remote installation, 8V/60W ERP, UL Listed LEDSB0W8V-NDM-U0 LED power supply source for remote installation, 8V/0W ERP, UL Listed O York Street Brooklyn, NY 0 (78) Specifications and dimensions subject to change without notice. Issued Page of

5 Spot 0 Accent LED Spot modules can be rapidly exchanged and repositioned without tools. Light elements are quick to position and connect automatically with magnets. Honeycomb and cross baffle comes standard with the fixture. IP0. ø º. 7 60º CCT C R I Initial Lumen Delivered Lumens Watts Beam Spread Finish Built-in dimmer DALI Dimming 0-0V Dimming Photometric h(m) º 0 = White 0 = Chrome DA DA DA V V V 0 0 cd 0 lm h(m) º 0 = White 0 = Chrome DA DA DA V V V cd 0 0 lm O York Street Brooklyn, NY 0 (78) Specifications and dimensions subject to change without notice. Issued Page of

6 Spot Accent LED Spot modules can be rapidly exchanged and repositioned without tools. Light elements are quick to position and connect automatically with magnets. Honeycomb and cross baffle comes standard with the fixture. IP0 ø º 60º CCT C R I Initial Lumen Delivered Lumens Watts Beam Spread Finish Built-in dimmer DALI Dimming 0-0V Dimming Photometric º 0 = White DA DA V V h(m) = Chrome DA V 0 80 cd 0 lm (EXTREME CUT OFF) º 0 = White DA DA V V h(m) = Chrome DA V 0 60 cd 0 8 lm (EXTREME CUT OFF) = White º DA DA V V h(m) = Chrome DA V 0 0 cd 0 06 lm (EXTREME CUT OFF) º 0 = White DA DA V V h(m) = Chrome DA V 0 9 cd 0 9 lm (EXTREME CUT OFF) 9..9 O York Street Brooklyn, NY 0 (78) Specifications and dimensions subject to change without notice. Issued Page 6 of

7 Spot 0 Power LED Accent LED Spot modules can be rapidly exchanged and repositioned without tools. Light elements are quick to position and connect automatically with magnets. Honeycomb and cross baffle comes standard with the fixture. IP º.7 60º CCT 000 CRI Initial Lumen Finish Delivered Watts Beam Spread DALI 0-0V Built-in dimmer Dimming Dimming Photometric Lumen 0 = White º 0 = Chrome DA DA DA V 0.8..V V cd lm h(m) º 0 = White DA DA V 0.8..V 7 h(m) = Chrome DA V 0 7 cd 0 6 lm = White º DA DA V V 0 h(m) = Chrome DA V 0 7 cd 0 69 lm º 0 = White DA DA V V 0 h(m) = Chrome DA V 0 67 cd 0 99 lm O York Street Brooklyn, NY 0 (78) Specifications and dimensions subject to change without notice. Issued Page 7 of

8 Spot 0 LED Array Accent LED Spot modules can be rapidly exchanged and repositioned without tools. Light elements are quick to position and connect automatically with magnets. Honeycomb and cross baffle comes standard with the fixture. IP º.7 60º CCT C R I Initial Lumen Delivered Lumens Watts Beam Spread Finish Built-in dimmer DALI Dimming 0-0V Dimming Photometric º 0 = White DA 0.8..DA V 0.8..V h(m) = Chrome DA V cd lm º 0 = White DA 0.8..DA V 0.8..V h(m) = Chrome DA V 0 7 cd 0 6 lm = White º DA DA V V h(m) = Chrome DA V 0 7 cd 0 69 lm º 0 = White DA DA V V h(m) = Chrome DA V 0 67 cd 0 99 lm O York Street Brooklyn, NY 0 (78) Specifications and dimensions subject to change without notice. Issued Page 8 of

9 Spot 0 Accent LED Spot modules can be rapidly exchanged and repositioned without tools. Light elements are quick to position and connect automatically with magnets. IP0 ø º 60º CCT C R I Initial Lumen Delivered Lumens Watts Beam Spread Finish Built-in dimmer DALI Dimming 0-0V Dimming Photometric º 0 = White DA DA V V h(m) = Chrome DA V 0 79 cd 0 87 lm º 0 = White DA DA V V h(m) = Chrome DA V 0 68 cd lm = White 86. 8º DA DA V V h(m) = Chrome DA V 0 89 cd 0 86 lm º 0 = White DA DA V V h(m) = Chrome DA V cd 0 77 lm = White 88. 0º DA DA V V h(m) = Chrome DA V 0 66 cd 0 88 lm º 0 = White DA DA V V h(m) = Chrome DA V 0 0 cd 0 78 lm O York Street Brooklyn, NY 0 (78) Specifications and dimensions subject to change without notice. Issued Page 9 of

10 Optional Accesories Spot 0 Image QTY Item Number Description Cross Baffle Elliptical Lens Flood Lens Honeycomb Snoot shielding cone O York Street Brooklyn, NY 0 (78) Specifications and dimensions subject to change without notice. Issued Page 0 of

11 Light Strip 6 SEE TABLE Length CRI CCT Initial Lumen Delivered Lumens Watts Built-in dimmer DALI Dimming 0-0V Dimming.8 (00 mm) DA V DA V.6 (600 mm) DA DA V V. (0 mm) DA DA V V 7. (00 mm) DA DA V V 9 (00 mm) DA DA V V O York Street Brooklyn, NY 0 (78) Specifications and dimensions subject to change without notice. Issued Page of

12 The Tracking Magnet EVO R ecessed How to Specify A. Select and position corners. Horizontal - Connect sections on flat surfaces (º corner). Inside - Transition from wall to ceiling (inside corner). External - Turn outside corners for walls and soffits (70 corner) B. Fill lengths between corners with Linear Track Select dimmable (DALI-FLOS Smart control and 0-0V fixtures) or non dimmable track (Built-in dimmer fixtures). Available section lengths are.,.9, 6.7 or 8.'. Profile can be easily cut to site to exact length and joined together. C. Drivers Quantity of drivers determined by total wattage or light elements in section (total maximum possible per linear foot is 9W). Maximum driver distance is. Locate drivers nearby. D. Select Spot heads Light Strips are available in three nominal lenghts:.8",.6",.", 7." and 9. Individual Spots are Spot 0, Spot, Spot 0, Spot 0. Outer Corner Intermediate Connector Corner Feed Unit Straight Element Smart Control Bluetooth GATEWAY (optional) Flexible Corner Connector End Cap O York Street Brooklyn, NY 0 (78) Specifications and dimensions subject to change without notice. Issued Page of