PT6104. Multi-Cell Li-ion Battery Pack Charger controller FEATURES GENERAL DESCRIPTION APPLICATIONS TYPICAL APPLICATION DIAGRAM
|
|
- Stephen Carson
- 5 years ago
- Views:
Transcription
1 GENERAL DESCRIPTION The PT6104 is an high efficiency, pulse frequency modulated (PFM) switching charger controller for 2 or 4 cell li-ion battery packs. It supports three segments of charging periods, small current pre-charging, constant current, and constant voltage. By changing topology and external parts, user could apply PT6105 to multiple applications, like having different battery cells, charging current, or switching frequencies. The PT6104 also provides necessary battery charging protections for short circuit, over voltage, ultra low voltage, pre-charge level, fast charge, and over current. Over temperature protection for battery pack is realized through an externally connected thermal resistor. The package of PT6104 is SOP8 APPLICATIONS portable DVD player LCD TV other portable devices FEATURES Battery plug-in detect: Constant current charge; the fast charge current can be adjust by external resistor. Ultra low battery voltage protect: Using small pre-charge current to protect the battery in ultra low voltage; Normal charge mode: Using the pre-set current to fast charge the battery; Accurate full charge detection by sensing charging current; Protecting functions for over voltage, over current, and ultra low voltage; Battery over temperature protection before and during charging. Charge time protections for pre-charge and fast charge periods; Recharging function: After being fully charged, The battery will be recharged if the battery voltage drops below 3.9v. LEDs indicate different charging states 4.5V operating voltage. TYPICAL APPLICATION DIAGRAM VIN R1 R14 R12 C1 C2 PFM R10 R11 R2 C4 431 R13 TS CS RC R15 C3 R4 R6 R10 R8 OSC VS R5 R7 Rt LED GND R9 1
2 PIN ASSIGNMENT PIN DESCRIPTIONS PIN SYMBOL DESCRIPTION 1 Power input 2 TS External thermal sensor input terminal. 3 OSC Oscillator input. 4 LED LED charge/discharge state display output 5 GND Ground input 6 VS Battery sample voltage input 7 CS Charge current sample input 8 PFM Pulse Frequency modulation output ABSOLUTE MAXIMUM RATINGS SYMBOL ITEMS VALUE UNIT Power Supply Voltage -0.3~7 V PFM Pulse frequency modulation -0.3~7 V LED Charge/discharge state contrl -0.3~7 V TS Battery temp detect -0.3~7 V All Other Pins -0.3~7 V Operating temperature -40~85 Storage temperature -55~125 2
3 RECOMMENDED OPERATING RANGE SYMBOL ITEMS VALUE UNIT 4.5 V PFM 0~4.5 V LED 0.4~4.0 V TS 2.25~4.5 V Vs 2.0~4.3 V Cs 2.0~4.3 V Temperature Range 0~85 ELECTRICAL CHARACTERISTICS SYMBOL PARAMETER TEST CONDITION MIN TYP MAX UNIT Supply voltage Supply voltage 4.5 V Charge mode control Vplug Battery plug-in voltage Vmin Pre-charge voltage Vfull-error Charge full error Vre-charge Re-charge voltage V Vfast Constant voltage Vmax Maximum voltage Charge current control V(Idelt) Volt of fast charge mode V(pre) Volt of pre charge mode Sense resistor is 0.5Ω mv V(Ifull) Volt of charge termination LED drive current Iled LED driving current 10 ma Charge time control Tpre Pre-charge protection time 20 min Ttotal Total charge protection time 2 hr Over temperature protection Tprel Pre-charge shutdown 0 Tpreh temperatrue 43 Tchl Normal charge shutdown 0 Tchh temperature 53 3
4 SIMPLIFIED BLOCK DIAGRAM 4
5 PACKAGE INFORMATION L SYMBOL DIMENSIONS IN MILLIMETERS DIMENSIONS IN INCH MIN MAX MIN MAX A A A b c D E E e 1.270(BSC) 0.050(BSC) L θ
HX4002 HX1001. White LED Backlighting Li-Ion Battery Backup Supplies Local 3V to 5V Conversion Smart Card Readers PCMCIA Local 5V Supplies
HX1001 Low Noise, Regulated Charge Pump DC/DC Converter Features Fixed 5V±4% Output VIN Range: 2.7V ~ 5V Output Current: up to 250mA (V IN =4.5V) Low Noise Constant Frequency Operation Shutdown Current:
More informationASI. Switched-Capacitor Boost Converter 3.3V-5.0V 100mA GENERAL DESCRIPTION FEATURES APPLICATIONS
ASI Technical Data Sheet Switched-Capacitor Boost Converter 3.3V-5.0V 100mA FEATURES Switched-Capacitor Step-Up Operation Input Range: 2.7V to 5.0V Output Voltage: 3.3V-5.0V (programmable) Output Current:
More information2 AA Cell to 3.3V USB On-The-Go Devices White LED Drivers Handheld Devices. The HM3200B is available in the 6-pin SOT23-6.
Low Noise, Regulated Charge Pump DC/DC Converter Features Fixed 3.3V ± 4% Output VIN Range: 1.8V to 5V Output Current: 100mA Constant Frequency Operation at All Loads Low Noise Constant Frequency (1.2MHz)
More informationYB1300S Switched Capacitor Boost Converter 5V/4.5V
Description The YB1300S is a switched capacitor DC/DC boost converter that produces a regulated 5V output. The input voltage range is from 2.7V to 5.0V that makes the YB1300S ideally for a single cell
More informationG5803 1A Single Cell Li-Ion Battery Linear Charger
1A Single Cell Li-Ion Battery Linear Charger Features No External Power MOSFET, Sense Resistor or Blocking Diode Required 1% Regulation Voltage Accuracy Programmable Constant Charge Current Limit up to
More informationSGM2020 Low Power, Low Dropout, RF - Linear Regulators
GENERAL DESCRIPTION The series low-power, low-noise, low-dropout, CMOS linear voltage regulators operate from a 2.5V to 5.5V input voltage. They are the perfect choice for low voltage, low power applications.
More informationSGM mA, Low Power, Low Dropout 3 -Terminal, Linear Regulators
3 -Terminal, Linear Regulators GENERAL DESCRIPTION The series low-power, low-noise, low-dropout, CMOS linear voltage regulators operate from a 2.5V to 5.5V input voltage. They are the perfect choice for
More informationCS213. Protection IC for 1-Cell Battery Pack. Description. Features. Application. Typical Application Circuit
Protection IC for 1-Cell Battery Pack Features Detection Accuracy Over-charge Detection: ±40mV Over-discharge Detection: ±100mV Discharge Over-current Detection: ±20mV High Withstand Voltage Absolute maximum
More informationSGM2032 Low Power, Low Dropout, RF Linear Regulators
GENERAL DESCRIPTION The SGM2032 series low power, low noise, low dropout, CMOS linear voltage regulators operate from a 2.5V to 5.5V input voltage. They are the perfect choice for low voltage, low power
More informationAUR9801D. Pin Assignments. Description. Applications. Features LI-ION/LI POLYMER BATTERY CHARGER AUR9801D
LI-ION/LI POLYMER BATTERY CHARGER Description Pin Assignments The is a highly-integrated battery charger for single-cell Li-ion or Li-polymer batteries capable of operating with an input voltage reached
More informationSGM mA, Ultra Low Dropout, Low Power, RF Linear Regulators
GENERAL DESCRIPTION The is a low-power, low-noise, low-dropout, CMOS linear voltage regulator that operates from a 2.5V to 5.5V input voltage. It is the perfect choice for low voltage, low power applications.
More informationSGM2019 Low Power, Low Dropout, RF-Linear Regulators
GENERAL DESCRIPTION The SGM2019 series low-power, low-noise, low-dropout, CMOS linear voltage regulators operate from a 2.5V to 5.5V input voltage. They are the perfect choice for low voltage, low power
More informationSGM2019 Low Power, Low Dropout, RF - Linear Regulators
GENERAL DESCRIPTION The SGM219 series low-power, low-noise, low-dropout, CMOS linear voltage regulators operate from a 2.5V to 5.5V input voltage. They are the perfect choice for low voltage, low power
More informationBattery Protection IC for Single-cell Pack
Battery Protection IC for Single-cell Pack Features Low supply current Normal operation: 3uA typ. @ VCC = 3.9V Power-down mode: 0.1uA max. @VCC = 2.0V Over-charge detection voltage (V CU ) 4.25~4.3V, accuracy:
More informationAP5056. Using SOP8/MSOP8 package 1A Linear Li-Ion Battery Charger. Description. Package. Features. Typical Application Circuit
Description The AP5056 is a complete constant current & constant voltage linear charger for single cell lithium-ion batteries. Its SOP/MSOP package and low external component count make the AP5056 ideally
More informationHM9708 HM9708. Battery-Powered Equipment Motherboard USB Power Switch USB Device Power Switch Hot-Plug Power Supplies Battery-Charger Circuits DC+ VIN
200mΩ Power Distribution Switches Features 200mΩ Typ. High-Side MOSFET 0.8A Current Limit (V IN =3.0V) Wide Input Voltage Range: 2V ~ 5.5V Soft Start Thermal Protection Small SOT-23-5 Package Minimizes
More informationSGM2031 Low Power, Low Dropout, RF - Linear Regulators
RF - Linear Regulators GENERAL DESCRIPTION The series low-power, low-dropout, CMOS linear voltage regulators operate from a 2.5V to 5.5V input voltage in an ultra small package. They are the perfect choice
More informationJC GENERAL DESCRIPTION FEATURES APPLICATIONS TYPICAL APPLIC PIN ASSIGNMENT. 300mA, Low Consumption, Low Dropout, CMOS LDO
GENERAL DESCRIPTION The series arelowdropout linear regulators and optimized to provide a high performance solution for battery power system to delivery low quiescent current. The device offer a new level
More informationAIC1520. Ferrite Bead GND. *33µF, 16V Tantalum, or 100µF, 10V Electrolytic Bold line indicate high-current traces. USB High-Side Power Switch
USB High-Side Power Switch FEATURES 120mΩ (5V Input) High-Side MOSFET Switch. 500mA Continuous Load Current. 80µA Typical On-State Supply Current. Current-Limit / Short Circuit Protection. Thermal Limiting
More informationBCT Channel LED Driver (Common-Anode & Common-Cathode) Low Dropout Current Source & Current Sink. General Description. Features.
BCT3220 Low Dropout Current Source & Current Sink General Description The BCT3220 is a high performance white LED driver. The BCT3220 uses an internal resistor to set the bias current for four LEDs, which
More informationSGM2022 Dual, Low Dropout, 250mA LDO Regulator
GENERAL DESCRIPTION The SGM2022 is a dual, low-power, low-dropout, CMOS linear voltage regulator. It operates from a 2.5V to 5.5V input voltage and delivers up to 250mA at each channel. The SGM2022 is
More informationA8241. AiT Semiconductor Inc. APPLICATION ORDERING INFORMATION. Low 60mV Dropout at 20mA 4% LED Current Matching
DESCRIPTION The is a CMOS based White/Blue LED driver with stand-alone capability. The driver is primarily designed for LED backlighting of LCD display powered by Li-ion battery with its high efficiency,
More informationWS3210C62 WS3210C62 Over-Voltage Protection Load Switch Descriptions CSP-9L (Bottom View) Pin Configuration (Top View)
Over-Voltage Protection Load Switch http://www.sh-willsemi.com Descriptions The features a low R ON internal High Voltage Switch and an input range of absolute maximum 30V. An internal input clamp is capable
More informationDS21T09 Plug and Play SCSI Terminator
DS21T09 Plug and Play SCSI Terminator www.dalsemi.com FEATURES Fully compliant with SCSI-1, Fast SCSI and Ultra SCSI Compatible with Plug and Play SCSI Profile Functional drop in replacement for the DS2109
More informationWS3210 WS3210. Over-Voltage Protection Load Switch. Descriptions. Features. Order information. Applications.
Over-Voltage Protection Load Switch http://www.sh-willsemi.com WS3210 Descriptions The WS3210 features a low internal High Voltage Switch and an input range of absolute maximum 30V. An internal input clamp
More informationRT mA 5-Channel Charge Pump White LED Driver with Low Dropout Current Source. Features. General Description. Applications. Pin Configurations
General Description The RT9365 is a high performance white LED driver. It integrates current sources and automatic mode selection charge pump. The part maintains the high efficiency by utilizing an x1/x1.5
More informationNJW4120. Lithium-ion Battery Charger Controller IC with Timer
Lithium-ion Battery r Controller IC with Timer GENERAL DESCRIPTI NJW4120 is a 1-cell and 2-cell lithium ion battery charge control IC with a built-in AC-DC secondary side control feature. Using a photocoupler
More informationACE803ND 3-Pin Microprocessor Reset Circuits
Description ACE803ND The ACE803ND is a microprocessor (μp) supervisory circuit used to monitor the power supplies in μp and digital systems. It provides excellent circuit reliability and low cost by eliminating
More informationPART TOP VIEW. TO LOAD SINGLE Li+ CELL TO IN LOGIC OUT. Maxim Integrated Products 1
19-224; Rev 2; 6/3 USB-Powered Li+ Charger General Description The is a single-cell lithium-ion (Li+) battery charger that can be powered directly from a USB port* or from an external supply up to 6.5V.
More informationMP V, 1A Dual Input Linear Battery Charger With Timer
MP268 28V, 1A Dual Input Linear Battery Charger With Timer The Future of Analog IC Technology DESCRIPTION The MP268 is a dualinput, linear, highperformance lowcost single cell LiIon or LiPolymer battery
More informationDIO5151B 700mA/1A Buck/Boost Charge Pump LED Driver
Rev 0.1 Features Output Current : DIO5151BED8: 700mA DIO5151BCD10: 1A Up to 90% Efficiency in Torch Mode Adjustable FLASH Mode Current 1 and 2 Automatic Modes for High Efficiency Input Voltage Range: 3V
More informationRT9532. Linear Single Cell Li-Ion Battery Charger IC for Portable Applications. General Description. Features. Applications. Marking Information
RT9532 Linear Single Cell Li-Ion Battery Charger IC for Portable Applications General Description The RT9532 is a fully integrated single cell Li-ion battery charger IC ideal for portable applications.
More informationOperation Manual of Smart Battery Systems (SBS) with SmBus V1.1 support for 12.8V LiFePO4 battery pack (6.6Ah-100Ah)
Operation Manual of Smart Battery Systems (SBS) with SmBus V1.1 support for 12.8V LiFePO4 battery pack (6.6Ah-100Ah) AA Portable Power Corp (http://www.batteryspace.com) Address: 860 S, 19 th St, Unit
More informationTrend-1 Vibration Data Logger. User Manual
Trend-1 Vibration Data Logger User Manual Copyright College of Engineering-University of Basrah 2013 1 1. General Specifications 1.1 Features Thank you for being interested in purchasing Trend-1 Vibration
More informationSTBC ma standalone linear Li-Ion battery charger with thermal regulation. Description. Features. Applications
800 ma standalone linear Li-Ion battery charger with thermal regulation Description Datasheet - production data Features Programmable charge current up to 800 ma No external MOSFET, sense resistors or
More informationXT9502. Linear Li-Ion Battery Charger. General Description. Applications. Features. Package. Ordering Information. Pin Assignment
Linear Li-Ion Battery Charger General Description series is a double lithium battery charge management chip. The chip includes a charge state detection, the charging process,temperature detection and so
More informationBCT mA Buck/Boost Charge Pump LED Driver
BCT3140 GENERAL DESCRIPTION The BCT3140 is a current-regulated charge pump ideal for powering high brightness LEDs for camera flash applications. The charge pump can be set to regulate two current levels
More informationFP6600. USB Dedicated Charging Port Controller with QC 2.0 Fast Charging Function. Features. Description. Applications.
USB Dedicated Charging Port Controller with QC 2.0 Fast Charging Function Description The is a fast charge protocol controller and follows Quick Charge 2.0 specification for smart power bank application.
More informationRT9505. Linear Single Cell Li-Ion Battery Charger IC. General Description. Features. Applications. Ordering Information. Pin Configurations
Linear Single Cell Li-Ion Battery Charger IC General Description The RT505 is a fully integrated low cost single-cell Li- Ion battery charger IC ideal for portable applications. The RT505 is capable of
More informationSRV05-4L. Ultra Low Capacitance Array for ESD Protection. Features. Description. Main applications. Protection solution to meet. Ordering Information
Ultra Low Capacitance Array for ESD Protection Description The provides a typical line to line capacitance of 0.80pF and low insertion loss up to 3GHz providing greater signal integrity making it ideally
More informationCW2013. Low-Cost 1s Fuel Gauge IC with Low-SOC Alert. General Description. Features. Applications. Order Information
CW2013 Low-Cost 1s Fuel Gauge IC with Low-SOC Alert Features System Side used Fuel Gauging 3% Maximum Total SOC Measurement Error 14 bit Delta Sigma ADC for Temperature and Cell Voltage Measurement Precision
More informationTS04. 4-Channel Self Calibration Capacitive Touch Sensor SPECIFICATION V2.0
TS4 4-Channel Self Calibration Capacitive Touch Sensor SPECIFICATION V2. Specification TS4 (4-CH Auto Sensitivity Calibration Capacitive Touch Sensor). General Feature 4-Channel capacitive sensor with
More informationUNISONIC TECHNOLOGIES CO., LTD US2005 Preliminary CMOS IC
UNISONIC TECHNOLOGIES CO., LTD US2005 Preliminary CMOS IC FIXED CURRENT LIMIT POWER DISTRIBUTION SWITCH DESCRIPTION UTC US2005 is a low voltage cost-effective high-side power switch with current limiting
More informationHI-8050/51, HI-8150/51 CMOS High Voltage Display Driver
February 2017 HI-8050/51, HI-8150/51 CMOS High Voltage Display Driver GENERAL DESCRIPTION The HI-8050, HI-8051, HI-8150 and HI-8151 are CMOS integrated circuits designed for high voltage LCD display drive
More information1.5A Ultra Low Dropout Linear Regulator CL39150
General Description The CL39150 is a low dropout three-terminal regulator with a typical dropout of 375mV at 1.5A output current. The CL39150 provides current limit and thermal shutdown. On-chip thermal
More informationFS326. One Cell Lithium-ion/Polymer Battery Protection IC. FS326 x Serial code from A to G *
General Description is a series of lithium-ion and lithium-polymer rechargeable battery protection ICs with high accurate voltage detection and delay circuits. These ICs are suitable for protection of
More informationSGM MHz, Video Driver with Y-C Mixer and Chroma Mute
26MHz, Video Driver with Y-C PRODUCT DESCRIPTION The SGM9140 is a low power, low voltage operation video amplifier with Y/C mixer and driver. SGM9140A is 12.4dB gain driver, and SGM9140B is 6.4dB gain
More information400mA Buck/Boost Charge Pump LED Driver
4mA Buck/Boost Charge Pump LED Driver SP6686 FEATURES Output Current up to 4mA Up to 94% Efficiency in Torch Mode Automatic Softstart Limits Inrush Current Adjustable FLASH Mode x1 and x2 Automatic Modes
More informationPI5USB2549 USB Charging Port Controller and Load Detection Power Switch
Features Supports DCP Modes per USB Battery Charging Specification 1.2 Supports Shorted Mode per Chinese Telecommunication Industry Standard YD/T1591-2009 Supports non-bc1.2 Charging Modes by Automatic
More informationDIO5158 1A Lithium Ion Battery Charger IC
DIO5158 Rev 1.5 Features Complete Charge Management for Single Cell Lithium Battery On-chip Power MOSFET No external Blocking Diode or Current Sense Resistors Required Preset 4.2V Regulation Voltage with
More informationWS4601 WS4601. Descriptions. Features. Applications. Order information. 80mΩ, Current Limited, Power Distribution Switch
80mΩ, Current Limited, Power Distribution Switch www.sh-willsemi.com Descriptions The is high-side switch with ultra-low ON resistance P-MOSFET. Integrated current-limit function can limit inrush current
More informationRT9526. Linear Single Cell Li-Ion Battery Charger with Input Over Voltage Protection. General Description. Features. Applications. Pin Configurations
Linear Single Cell Li-Ion Battery Charger with Input Over Voltage Protection General Description The RT9526 is a fully integrated low cost single cell Li-ion battery charger ideal for portable applications.
More informationSN8200 LI+ DUAL BATTERY CONTROLLER
LI+ DUAL BATTERY CONTROLLER GENERAL DESCRIPTION The SN8200 is a highly integrated IC to serve as the control logic for a system with multiple power sources. It integrates a mini-charger s path power MOS
More informationUSB Dedicated Charging Port Controller
USB Dedicated Charging Port Controller DESCRIPTION AF9522 are dual channel USB dedicated charging port controller, it can auto-detect feature monitors USB data line voltage, and automatically provides
More informationGENERAL DESCRIPTION APPLICATIONS FEATURES TYPICAL APPLICATION DIAGRAM
August 2009 Rev. 2.0.0 GENERAL DESCRIPTION The SP6686 is a current-regulated charge pump ideal for powering high brightness LEDs for camera flash applications. The charge pump can be set to regulate two
More informationSGM803/SGM809/SGM810 Microprocessor Supervisory Circuit in 3-Pin SOT-23
GENERAL DESCRIPTION The supervisory circuits monitor the power supply voltage in microprocessor and digital systems. They provide a reset output during power-up, power-down and brownout conditions. On
More information1A Ultra Low Dropout Linear Regulator
General Description The is a low dropout three-terminal regulator with a typical dropout of 0.28V at 1A output current. The provides current limit and thermal shutdown. On-chip thermal shutdown provides
More informationStandalone Linear Li-Ion Battery Charger with Thermal Regulation
Standalone Linear Li-Ion Battery Charger with Thermal Regulation DESCRIPTION The UP4054A is a complete constant-current /constant-voltage linear charger for single cell lithium-ion batteries. It s TSOT23-5
More informationHigh Current Power Switch
SP619 High Current Power Switch FEATURES Max RDS(ON).377 Ohms Overcurrent deactivation 800mA Max leakage current less than 2µA while deactivated Small 6 pin SOT-23 package Built-in Over-temperature Protection
More informationUSB dedicated charging port (DCP) controller BL2513M
USB dedicated charging port (DCP) controller BL2513M DESCRIPTION The BL2513M is USB dedicated charging port (DCP) controllers. Applications include vehicle power charger, wall adapters with USB DCP and
More informationMP5007 5V, 1A- 5A Programmable Current Limit Switch
The Future of Analog IC Technology DESCRIPTION The MP5007 is a protection device designed to protect circuitry on the output (source) from transients on input (V CC ). It also protects V CC from undesired
More informationE P AP3615. Pin Assignments. Description. Features. Applications 5 CHANNEL CHARGE PUMP CURRENT SINK FOR LED DRIVER AP3615
AGND PGND VIN EN VOUT1 NC VOUT2 D1 5 CHANNEL CHARGE PUMP CURRENT SINK FOR LED DRIVER Description The is a step-up DC-DC converter based on 1x/1.5x charge pump and low dropout current sink, which helps
More informationHigh-side Power Distribution Switch NCT3521U
High-side Power Distribution Switch NCT3521U -Table of Content- 1. GENERAL DESCRIPTION...1 2. FEATURES...1 3. APPLICATIONS...2 4. PIN CONFIGURATION AND DESCRIPTION...2 5. TYPICAL APPLICATION CIRCUIT...3
More informationDIO V Current Limited Load Switch
Rev 1.0 DIO7527 Features Input voltage range: 2.7V to 5.5V 2A Maximum Load Current 70mΩ typical R DS(ON) 70μA quiescent current Under-Voltage Lockout High precision over current trigger point Open-drain
More informationRT mΩ Power Distribution Switches. General Description. Features. Pin Configurations. Applications. Ordering Information
100mΩ Power Distribution Switches General Description he is an integrated 100mΩ power switch for self-powered and bus-powered Universal Series Bus (USB) applications. A built-in charge pump is used to
More informationMAX8804V/MAX8804W/MAX8804Y/MAX8804Z
19-785; Rev 2; 4/8 EVALUATION KIT AVAILABLE High-Voltage, Dual-Input, USB/AC General Description The intelligent, dual-input, stand-alone, constant-current, constant-voltage (CCCV), thermally regulated
More informationMP6219 5V, 1A 2A Programmable Current Limit Power Distribution Switch
The Future of Analog IC Technology MP6219 5V, 1A 2A Programmable Current Limit Power Distribution Switch DESCRIPTION The MP6219 is a protection device designed to protect circuitry on the output from transients
More informationEXT9502 XX XX X R Tape & Reel Voltage Accuracy: A:±1% B:±2%
General Description series is a double lithium battery charge management chip. The chip includes a charge state detection, the charging process, temperature detection and so on. The chip also integrates
More informationAIC A Dual USB High-Side Power Switch FEATURES DESCRIPTION APPLICATIONS TYPICAL APPLICATION CIRCUIT
1.0A Dual USB High-Side Power Switch FEATURES 2.7V to 6.5V Input Voltage Range 1.0A Dual Continuous Load Current 100mΩ High-Side P-MOSFET Switch 20Ω Open-Drain Over-Current Flag Output 80uA Quiescent Supply
More informationUSB dedicated charging port (DCP) controller BL2514M
USB dedicated charging port (DCP) controller BL2514M DESCRIPTION The BL2514M is USB dedicated charging port (DCP) controllers. Applications include vehicle power charger, wall adapters with USB DCP and
More informationLTC4089/-5 DESCRIPTION
LTC4089/-5 DESCRIPTION Demonstration circuit DC929A-A/B is a monolithic high voltage (6V-36V) switching buck regulator, USB Powerpath controller, and Li-Ion battery charger. It is based on the LTC4089/-5
More information5 V Charge Pump HDMI Tx Companion Chip AD9394
Data Sheet FEATURES 5 V at 55 ma output for an HDMI +5 V requirement For hot plug detect with HDMI Tx 3.3 V at 60 ma output Lithium battery input: 2.5 V to 4.5 V Short-circuit limitation: 00 ma 3 4 array
More informationMP6302 Energy Storage and Release Control IC
The Future of Analog IC Technology MP6302 Energy Storage and Release Control IC DESCRIPTION The MP6302 is an energy storage and release controller. It charges storage capacitor from input during normal
More informationMIC2546/2547. Features. General Description. Applications. Typical Application. Dual Programable Current Limit Switch
Dual Programable Current Limit Switch General Description The MIC2546 and MIC2547 are integrated high-side dual power switches optimized for low loss dc power switching and other power management applications,
More informationMP5013A 5 V, 5 A Programmable Current-Limit Switch with Over-Voltage Clamp and Slew-Rate Control in TSOT23-8
The Future of Analog IC Technology MP5013A 5 V, 5 A Programmable Current-Limit Switch with Over-Voltage Clamp and Slew-Rate Control in TSOT23-8 DESCRIPTION The MP5013A is a protection device designed to
More informationEV2617-L-00A. 3A, 1-Cell Li-Ion Battery Switching Charger With NVDC Power Path Management FEATURES DESCRIPTION APPLICATIONS ELECTRICAL SPECIFICATION
EV2617-L-00A 3A, 1-Cell Li-Ion Battery Switching Charger With NVDC Power Path Management The Future of Analog IC Technology DESCRIPTION The EV2617-L-00A is an evaluation board for MP2617, a 3A/1.6MHz 1-cell
More informationSGM Channel, 6th-Order Video Filter Driver for SD/HD
PRODUCT DESCRIPTION The SGM9346 video filter is intended to replace passive LC filters and drivers with an integrated device. Six 6th-order Butterworth filters provide improved image quality compared to
More informationFeatures MIC2779L IN OUT HTH GND. Cellular Telephone Battery Monitor
MIC2779 Voltage Monitor with Adjustable Hysteresis General Description The MIC2779 is a voltage monitor uniquely designed to detect two separate voltage thresholds combined with a delay generator and logic.
More informationSpecifications USB-1408FS
Document Revision 1.1, May, 2006 Copyright 2006, Measurement Computing Corporation Typical for 25 C unless otherwise specified. Specifications in italic text are guaranteed by design. Analog input Table
More informationUNISONIC TECHNOLOGIES CO., LTD
UNISONIC TECHNOLOGIES CO., LTD MICROPROCESSOR IC DESCRIPTION The UTC UTC812 is a microprocessor (µp) reset circuit designed to monitor the power supplies in µp and digital systems. The UTC UTC812 has push-pull
More informationADV. AD1117-XX 1A Low Dropout Regulator SCSI-II Active Terminator PRODUCT DESCRIPTION PIN CONNECTIONS APPLICATIONS FEATURES ORDERING INFORMATION
FEATURES Guaranteed 1A Output Three Terminal Adjustable Or Fixed 1.5V, 2.5V, 2.85V, 3V, 3.3V & 5V Very Low Quiescent Current Low Dropout Voltage Of 1.2 Volts At Full Load Extremely Tight Load And Line
More informationQUICK START GUIDE FOR DEMONSTRATION CIRCUIT 1068A DUAL INPUT LI-ION BATTERY CHARGER WITH SYNCHRONOUS BUCK REGULATOR
Demonstration circuit 1068A is a complete single cell Lithium-Ion battery charger and a synchronous buck voltage regulator with adjustable output voltage. Operating at a frequency of 1.5MHz, the regulator
More informationV PP IN V CC3 IN V CC5 IN EN0 EN1 MIC2561 V CC5_EN V CC3_EN
MIC2561 PCMCIA Card Socket and V PP Switching Matrix Final Information General Description The MIC2561 & V PP Matrix controls PCMCIA (Personal Computer Memory Card International Association) memory card
More informationHigh-Current/Overvoltage Protection Switch IC with Voltage Suppressor
Series High-Current/Overvoltage Protection Switch IC with Voltage Suppressor OUTLINE The R5560Z is a CMOS-based high-current and overvoltage protection switch IC with voltage suppressor that uses an NMOS
More informationMP201 Dying Gasp Storage and Release Control IC
The Future of Analog IC Technology MP201 Dying Gasp Storage and Release Control IC DESCRIPTION The MP201 is a dying gasp storage and release controller. It charges storage capacitor from the input during
More information2 Channel Charge Pump Supply for TFT-LCD
.. General Description The is a high perfomance charge pump converter to generate positive and negative voltage supply optimized for small to medium size thin-film transistor(tft) liquid crystal displays
More informationCEP8120 Rev 1.0, March, 2015
USB Dedicated Charging Port Controller FEATURES Supports USB DCP Shorting D+ Line to D Line per USB Battery Charging Specification, Revision 1.2 (BC1.2) Supports Shorted Mode (Shorting D+ Line to D- Line)
More informationWT6632F (Standard Code Version) USB Power Delivery Controller
WT6632F (Standard Code Version) Data Sheet Rev. 1.0 September 2016 Copyright Notice This data sheet is copyrighted by Weltrend Semiconductor, Inc. Do not reproduce, transform to any other format, or send/transmit
More informationST0561D4. 1-Line Bi-directional TVS Diode. Description. Mechanical Characteristics. Applications. Features. Ordering Information
-Line Bi-directional TVS Diode Description The ST56D4 is a bi-directional TVS diode, utilizing leading monolithic silicon technology to provide fast response time and low ESD clamping voltage, making this
More informationNTE1731 Integrated Circuit CMOS 10 Number Pulse Dialer
NTE1731 Integrated Circuit CMOS 10 Number Pulse Dialer Description: The NTE1731 is a CMOS LSI repertory dialer with ten 16 digit number memory storage in a 16 Lead DIP type package. The pulse and mute
More informationMIC2544A/2548A. General Description. Features. Applications. Typical Application. Programmable Current Limit High-Side Switch
Programmable Current Limit High-Side Switch General Description The MIC2544A and MIC2548A are integrated, high-side power switches optimized for low loss DC power switching and other power management applications,
More informationRT9527L. Single Cell Li-Ion Battery Charger with Adjustable Charging Current for Portable Applications. General Description. Features.
RT9527L Single Cell Li-Ion Battery Charger with Adjustable Charging Current for Portable Applications General Description The RT9527L is a low cost single-cell Li-ion charger for low current charge applications.
More informationBATTERY MANAGEMENT SYSTEM Master Slave configuration
Rozna ulica 20, 6230 Postojna, Slovenia e-mail: info@rec-bms.com; www.rec-bms.com BATTERY MANAGEMENT SYSTEM Master Slave configuration Features: - robust and small design - Master + max 15 Slave combination
More informationower Management IC for Portable Devices 1-Channel DC/DC Converter + 1-Channel Low-Noise LDO
P ower Management IC for Portable Devices 1-Channel DC/DC Converter + 1-Channel Low-Noise LDO MB39C22G/MB39C22J MB39C22L/MB39C22N An optimal IC for power management systems in portable devices with one
More informationDistributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. LM3525 Single Port USB Power Switch and Over-Current Protection General
More informationDescription Mechanical Characteristics Features Applications Ordering Information Part Number Packaging Reel Size
ST36D4 -Line Bi-directional TVS Diode Description The ST36D4 is a bi-directional TVS diode, utilizing leading monolithic silicon technology to provide fast response time and low ESD clamping voltage, making
More informationFigure 1 Typical Application Circuit
4-CH CAPACITIVE TOUCH SENSOR WITH AUTO CALIBRATION August 2015 GENERAL DESCRIPTION The IS31SE5104 is a low power, fully integrated 4-channel solution for capacitive touch button applications. The chip
More informationKA258/KA258A, KA358/KA358A, KA2904
KA258/KA258A, KA358/KA358A, KA2904 Dual Operational Amplifier www.fairchildsemi.com Features Internally Frequency Compensated for Unity Gain Large DC Gain: 100dB Wide Power Supply Range: KA258/KA258A,
More information1, 2, 4 and 8-Channel Very Low Capacitance ESD Protectors
1, 2, 4 and 8-Channel Very Low Capacitance ESD Protectors CM1210 Features 1,2,4 and 8 channels of ESD protection Very low loading capacitance (1.0pF typical) ±6 kv ESD protection per channel (IEC 61000-4-2
More informationDOCUMENT REVISION HISTORY 1:
PAGE 2 OF 12 DOCUMENT REVISION HISTORY 1: DOCUMENT REVISION FROM TO DATE DESCRIPTION CHANGED BY A 2008.11.19 First Release. (Based on LCD counter drawing: COG-DEMO1003 (Rev.0)) PHILIP CHENG CHECKED BY
More information