USER GUIDE. Twister MINI

Transcription

1 USER GUIDE Twister MINI 1

2 Dear Users, Products with logo - MODE360 manufactured by MODE SA have the highest quality, durability of use and meet all EU requirements. We are convinced that our products fully meet your expectations. Yours faithfully MODE Team 2

3 Table of Contents 1. INTRODUCTION LIST OF ITEMS BASIC COMPONENTS EQUIPMENT MODE360 TWISTER MINI: ADDITIONAL COMPONENTS EQUIPMENT MODE360 TWISTER MINI: TECHNICAL DESCRIPTION AND SPECIFICATION: CONNECTION DEVICES PLATE ASSEMBLY SUGGESTED CONFIGURATION NOISE TRANSPORT, CONNECTION AND PREPARATION FOR WORK EXPLOITATION AND CONSERVATION DECLARATION OF CONFORMITY WE WARRANTY MACHINE MARKING

4 1. INTRODUCTION This document concerns a device designed to taking photos and their processing. The device is a compact photo studio which works with connected digital camera and PC. You can control the positioning of the object, interior lighting, camera settings, take and edit photos (or video films) by using an application which is attached to the device. (Danger) Warning against situations threatening serious (irreversible) injury or death if user is not careful. (Warning) Warning against threats which can cause minor body injury or damage to the machine. Before use, please become acquainted with the whole device manual. The manufacturer is not responsible for damages caused by improper, inexpert or careless using of the machine. 4

5 2. LIST OF ITEMS Before you start, check that the following items have been supplied with the device. In the absence of any of them, please contact with your dealer. Twister Mini USB 2.0 1,8M cable Power cable Key MODEVid Mode360 software License card * Be careful, not to lose any of the above items. 5

6 Accessories: ` Background illuminated LED 6500K 2 lighting LED lights 6500K Cable lighting Star filter Polarizer filter Marumi 72 mm (for lens Sigma 17-70) Filter UV Hoya 72 mm Reverse adapter for lens Cotton gloves White (3 pairs) 6

7 Chains and earings holder black 15x12 cm Chain and earings holder clear 20x20 cm Earings holder clear 6x8 cm Colored stripes Transparent wax for rings positioning (2 pcs) 7

8 3. BASIC COMPONENTS EQUIPMENT MODE360 TWISTER MINI: 1. MODE360 TWISTER MINI. 2. Software (MODEPiX lub premium MODEVID). 3. Cable (power,usb). 4. Basic account in the cloud on modeview.com 4. ADDITIONAL COMPONENTS EQUIPMENT MODE360 TWISTER MINI: 1. Platform rotating in the colors white matt or gloss white and gloss black. 2. Background illuminated LED 6500K lighting LED lights 6500K. 8

9 5. TECHNICAL DESCRIPTION AND SPECIFICATION: I. Twister MINI: Technical parameters: Model: TM40 Type: Twister MINI Serial number:... Technical specifiations: Dimensions: 40x40x6,5 cm* Weight: 2 kg* Power: V, 18W The diameter of the rotating platform: 40 cm* Hardware requirements: System: Windows 7/8/10; Mac OS X* Procesor: min. Intel Core i3* Graphics Card: min. True Color VGA 1024* x 768* Port: 3xUSB 2.0* 9

10 II. Background illuminated LED 6500K: Technical parameters: Model: Background illuminated LED 6500K Type: Twister MINI Specyfikacja techniczna: Dimensions: 40x53x11 cm* Weight: 2 kg* Power: V, 60W* Light type: Power LED 6500 K (daylight)* III. 2 lighting LED lights 6500K: Technical parameters: Model: 2 lighting LED Type: Twister MINI Specyfikacja techniczna: Dimensions: 40x4x6 cm* Weight: 0,5 kg* Power: V, 24W* Light type: Power LED 6500 K (daylight)* * Due to the continuous development of design and changes in technical requirements, the company Mode SA reserves the right to change parameters. 10

11 6. CONNECTION DEVICES I. Twister Mini (A) Switch device Twister Mini (B) Power plug Mini Twister (C) Plug controlled Background illuminated Twister Mini 11

12 (D) Plug Mini USB Twister Mini II. Background illuminated 12

13 (1) Power plug lighting LED 13

14 (2) Plug controlled Background illuminated 14

15 (3) Power plug Background illuminated 15

16 (4) Switch device Background illuminated 16

17 7. PLATE ASSEMBLY Place the plate in the axis so that the base plate has merged with the magnets (1) and (2). 17

18 18

19 8. SUGGESTED CONFIGURATION 19

20 9. NOISE The noise which is emitted during machine operation is comparable to computer operation. Another source of noise is the sound of the snapshot of connected camera. The noise level is not a threat and is not burdensome for the machine operator and other people who work in the same room. The device during work does not exceed 80 db. 10. TRANSPORT, CONNECTION AND PREPARATION FOR WORK Transport The shape and weight of the device allow for safe move. During operation, the device need not be moved. Before transporting the machine, make sure that: Twister Mini został odłączony od zasilania Twister Mini został odłączony od komputera Twister Mini został odłączony od tła (opcjonalne) Twister Mini został odłączony od lampek (opcjonalnie) 20

21 11. EXPLOITATION AND CONSERVATION Operator s workplace The device should be operated in a typical office workstation (desk, chair). It provides the proper position during operation. The device is operated in a room with lighting which is normal for office work. Furthermore, the device has its own lighting of the place of object exposure. Construction of the device (wide basis) and low center of gravity does not create a danger of stability losing. The machine cannot fall over without a deliberate action. Conservation Unless otherwise stated in this manual, inside the machine there are no elements that can be serviced by the user. Any repair must be made by qualified service technicians. For repair and replacement of parts, use only original elements and assemblies marked with the manufacturer, and recommended by him supplies! 21

22 12. DECLARATION OF CONFORMITY WE The device has been designed and manufactured in accordance with the requirements of the relevant directive that the manufacturer certifies CE and this declaration. Compatibility with directive: LVD /95/WE The device is powered by alternating-current 230V within the scope of the Low Voltage Directive 2006/95/WE (LVD) therefore subject to the requirements of the Directive. Most of the installation use safe voltage 12VDC in order to reduce electrical hazards. Impulse power supply used in installation has CE marking of conformity with LVD and has been connected according to the instruction. LEDs used for lighting are powered out of range the LVD. Compatibility with directive: EMC /108/WE The impulse power supply is the only element of the device which could cause interference or be susceptible to electromagnetic interference. The power supply has CE marking and declaration of conformity with Directive 2004/108/WE. Manufacturer of PHOTO COMPOSER can accept compliance with the EMC directive. 22

23 13. WARRANTY For this product manufacturer provides a 36 month warranty. Keep the original and complete packaging. If the device to repair has the non-original or incomplete packaging, the risk of damage in transport is on the purchaser side. Repackaging should be as adjusted for volume goods (device). Goods should be protected from the blows on each side of the package through the using of fill materials such as: Polystyrene foam, air foils, paper, etc. It is recommended to properly label: "cautiously glass", "up / down". In the interest of the purchaser is the best performance of the repackaging. For the faulty device must be accompanied by a copy of proof of purchase. The warranty is not granted: 1. by not observing the operating instructions, 2. Incorrect connection of the machine, 3. Incorrect using and maintenance, 4. For parts, which are subject to natural wear, such as plate, background, bearings, etc. 5. Defective or partial functioning of the equipment, caused by conflict or inconsistency between the installed applications and working environment and the impact of computer viruses. 6. The guarantee extends only to the free replacement of defect parts, but do not extend to consequences of the damage. Responsibility The manufacturer is not responsible for consequences of damage resulting from failure to manual and related improperly connecting the machine, improper operation of the machine, and especially for not to take immediately repair of safety devices. 23

24 14. MACHINE MARKING In accordance with the requirements of the Machinery Directive, the nameplate and described signs were placed on the device. 24

25 NOTES

26 The device was manufactured by: MODE S.A. ul. Starowiejska Gdańsk POLAND 26