Series 04 Lever Switches
|
|
- Eleanor Turner
- 5 years ago
- Views:
Transcription
1 EAO Your Expert Partner for Human Machine Interfaces Series 0 Lever Switches Product Information www. eao.com/catalogues
2
3 Lever switches S to S5 S S S3 S S5 Revision: Doc.-Id.: 7689 / / rd/kraft
4 Modification Report Revision Date Modifications Page(s) First edition all Definition of dimensioned drawings and connecting diagrams in appendix checked and revised thus automatic change of table of content specification for minimal current added.5 specification for 7 VDC and 0 VDC added specification for minimal current and specification for 7 VDC and 0 VDC added. Designation AC-, 60VAC /,0A changed to DC-, 60VDC /,0A.5 and.6 specification for minimal current added and.5 specification for minimal current changed from ma to 8mA in 0,5mA to 8mA drawing added (anti-twist device) 6 type key enhanced 7 drawing numbers revised and and revised all Attached documents deleted, grip shapes added all Revised 7 detents and switching sequences added Document revised construction changed all Document revised (T60) all 3 5 Doc.-Id.: 7689 / / rd/kraft
5 Table of Contents Illustrations... 6 Application Design Grips For All Units (S S 5)...0 Technical Data.... Complete Device.... Micro-Switch without Positive Opening Operation....3 Micro-Switch with Positive Opening Operation... 5 Installation Lever Switch Installation Handle Disassembly... 6 Type Key... 7 Appendix Order, Detents and Switching Sequences (T60) Doc.-Id.: 7689 / / rd/kraft
6 Illustrations S S S3 S S5 Figure : Lever switches S to S5 Doc.-Id.: 7689 / / rd/kraft 6
7 Application The lever switches in Figure types S to S5 are switches, which generate digital output signals depending on the position of the operator handle (). For this purpose, each switch has a maximum of 5 (S to S3) or (S and S5) micro-switches () with varying switching programs, thus providing for adaptability to the customer s demands. Besides the switching program, the micro-switch type, the electric interface, the colour of the centering rings (), and the mechanical features (angle of deflection of the operator handle, form of the grips, and its detent and spring return functions) are variable as well. Due to these variable features, the lever switches can be employed anywhere, where switching levers are to carry out operating functions. Since the centering rings () of the lever switches have formally been adjusted to the pushbuttons of the EAO type series 0, one can design operating units with pleasant looks using these components (hand-activated auxiliary switches and lever switches). 7 Doc.-Id.: 7689 / / rd/kraft
8 3 Design Figure : Design Figure provides information on the lever switch s basic design features. As one can see, it basically consists of an operator handle (), which is supported by a flange plate (). The form of the operator handle can vary. See the dimension drawings of the units (S S5). Below the flange plate, the operator handle is connected with a detent disk (3), which is operated by a spring loaded roller lever (). This is the operating principle behind the mechanical detent and spring return functions. All of the default detent and spring return functions are included in the technical specification no. T 60 (also in Gessmann catalogue 5/0). Other detent and spring return functions are available on request. Item (5) shows a stop pin, which will be employed, if the operator handles maximum angle of deflection (5-0-5 ) is to be limited. Its position and the number of stop pins is optional, which allows for a great variety of types with reduced angles of deflection (see T 60 or in Gessmann catalogue 5/0). Doc.-Id.: 7689 / / rd/kraft 8
9 The micro-switches (6) are activated by cam discs (7). Basically, there are two types of microswitches available:. Micro-switch without positive opening operation These micro-switches are used in the lever switches S, S, and S3. Each lever switch includes a maximum of 5 micro-switches. The technical data of these micro-switches is listed in chapter.. Micro-switch with positive opening operation These micro-switches are used in the lever switches S and S5. Each lever switch includes a maximum of micro-switches. The technical data of these micro-switches is listed in chapter. By varying the cam discs, the switching sequences may be adjusted to individual customer requirements. All the default switching sequences are listed in the technical specification no. T 60. Other switching programs are available on request. The electric interface (8) differs from one lever switch type to the other. More detailed information on these interfaces is given in table. In addition, the relevant connection diagrams are listed, too, which can be found attached. Type S S S3 S S5 Electric Interface cage clamp JST connector blade terminal cage clamp screw terminal up to 0.mm², 6.3 x 0.8 mm or blade termi-.5 mm².5 mm² counter plug is nal 6.3 x 0.8 supplied. Required mm crimping tool, JST WC 0 Connection diagram, - contacts Connection diagram, 3- contacts Connection diagram, 5 contacts Table : Electric interfaces EK / 87-0 EK / 90 0 EK / 9 0 EK / 96 0 EK / 06 0 EK / 89 0 EK / 9 0 EK / 95 0 EK / 0 0 EK / 06 0 EK / 05-0 EK / 07-0 EK / Doc.-Id.: 7689 / / rd/kraft
10 3. Grips for all units (S S 5) Doc.-Id.: 7689 / / rd/kraft 0
11 Technical Data. Complete device Mechanical product life - 5 million cycles Protection class (front side) - IP 5 Standards and approbations*: Fire behaviour: DIN pending NFF pending NFF pending Design: VDE 0660 *further standards and approbations on request. Micro-switch without positive opening operation (S = silver contacts) Mechanical product life - 5 million cycles Temperature range - -0 C to +85 C Switching category - DC-3, VDC /,0 A - DC-3, 60 VDC / 0,5 A - DC-3, 7 VDC / 0,35 A - DC-3, 0 VDC / 0, A - AC-3, 30 VAC /,5 Minimal current - 30 VDC / 0mA Micro-switch without positive opening operation (G = gold plated silver contacts) Mechanical product life - 5 million cycles Temperature range - -0 C to +85 C Switching category - DC-, to 30 VDC / 0mA Minimal current - 30 VDC / 0,5mA to 8mA Doc.-Id.: 7689 / / rd/kraft
12 .3 Micro-switch with positive opening operation (S = silver contacts) Solder-hook terminated contact - with lever switch S Contact with screw terminal - with lever switch S5 contact with blade terminal - with lever switch S5 Mechanical product life - 0 million cycles Temperature range - -0 C to +85 C Switching category - AC-, 50 VAC / 0A - DC-, VDC / 6,0 A - DC-, 60 VAC /,0 A - DC-, 7 VAC / 0,7 A - DC-, 0 VAC / 0,35 A - DC-, 50 VDC / 0. A Minimal current - 30 VDC / 0mA Micro-switch with positive opening operation (G = gold plated silver contacts) Solder-hook terminated contact - for lever switch S Contact with screw terminal - with lever switch S5 contact with blade terminal - with lever switch S5 Mechanical product life - 0 million cycles Temperature range - -0 C to +85 C Switching category - DC-, to 30 VDC / 0mA Minimal current - 30 VDC / 0,5mA to 8mA Doc.-Id.: 7689 / / rd/kraft
13 5 Installation 5. Lever switch installation With anti-twist device Without anti-twist device Figure 3: Installation Figure 3 shows the installation of the lever switch. As one can see, the lever switch () is inserted into the port () from below, and the centering ring (3) is placed upon it from the top. Fix the entire unit by tightening the two attachment screws () evenly (NOTE: Max. Torque 50 Ncm!!). Make sure to remove the cylindrical handles (handles 3 and ) before inserting the lever switch into the port. You will find a detailed instruction for the disassembly of the handles in chapter 5.. Attention! The surface of the assembly position of the switch has to be very flat without any barrier. The positioning of the lever switch with anti-twist device () is given by an arbor. The dimensioned drawings listed in table provide information on the outside dimensions of the various lever switch types and the port designs. All dimensioned drawings are attached. Type S S S3 S S5 Dimensioned M 650 M 65 M 65 M 653 M 65 drawing Table : Dimensioned drawings 3 Doc.-Id.: 7689 / / rd/kraft
14 5. Handle disassembly The handles 0, 03, 05, 3,, and 5 are put over the switching lever and then fixed axially by a hex-socket set screw (M3 DIN 96). Upon the loosening of this set screw, the handles can be removed upwards. For the handles 3 and, a cover must be removed first (see fig. ), before one can access the set screws. When tightening the set screws, make sure not to exceed the max. torque of 0 Ncm. grip cover set screw handle Figure : Handle disassembly 6 Type Key contact contact Sample: S X MS.../xy/xy V type handle design number of contacts Ms = detent see T 60 x = switching sequence see T 60 type of connection = screw terminal colour of centering ring 0 = black anodized lock against rotation not specified = without anti-twist device y = G = goldcontact S = silvercontact = blade terminal 6,3x0,8 8 = aluminium coloured anodized V = with anti-twist device 3 = cage clamp -,5mm = connector JST max 0,mm² Doc.-Id.: 7689 / / rd/kraft
15 87 Appendix This appendix includes all and any documents, to which reference was made in the previous chapters. Type of drawing Drawing No. Description Data sheet T 60 Order, Detents and switching sequences S, S to S5 Dimensioned drawing M 650 Dimensioned drawing S Data sheet EK / 87-0 Connection diagram to contacts (S) Data sheet EK / 89-0 Connection diagram 3 to contacts (S) Data sheet EK / 05-0 Connection diagram, 5 contacts (S) Dimensioned drawing M 65 Dimensioned drawing S Data sheet EK / 90-0 Connection diagram to contacts (S) Data sheet EK / 9-0 Connection diagram 3 to contacts (S) Data sheet EK / 07-0 Connection diagram, 5 contacts (S) Dimensioned drawing M 65 Dimensioned drawing S3 Data sheet EK / 9-0 Connection diagram to contacts (S3) Data sheet EK / 95-0 Connection diagram 3 to contacts (S3) Data sheet EK / 08-0 Connection diagram, 5 contacts (S3) Dimensioned drawing M 653 Dimensioned drawing S Data sheet EK / 96-0 Connection diagram to contacts (S) Data sheet EK / 0-0 Connection diagram 3 to contacts (S) Dimensioned drawing M 65 Dimensioned drawing S5 Data sheet EK / 06-0 Connection diagram to contacts (S5) Table 3: Appendix 5 Doc.-Id.: 7689 / / rd/kraft
16 87 Order, Detents and Switching Sequences (T60) purchase order offer Purchaser: Date Company: Name: Street Zip code: Location: Phone: Fax: Delivery address Company: Name: Street Zip code: Location: Phone: Fax: Requested delivery date: Delivery / and shipping instruction: Remarks: FAX: +9(0) gessmann@gessmann.com Doc.-Id.: 7689 / / rd/kraft 6
17 Figure 5: Detents and switching sequences (T 60) 7 Doc.-Id.: 7689 / / rd/kraft
18 Doc.-Id.: 7689 / / rd/kraft 8
19 A B C D E F top side S S "0" - position microswitch designation contacts 5 bottom side 3 6 X X 7 8 EK/87C BS X X 7 8 connection designation definition of switch direction (top side/bottom side) according to M3673 GB switching sequence according to T60 GB X/X: cage clamp WAGO 36-0/000-0 (orange) Projektleiter: Sachbearbeiter : Sachbearbeiter : Zeichnung darf nur über CAD geändert werden 003 Bearb. Gepr. Datum: Name: W. Gessmann GMBH Projektbeschreibung: S contacts e d c b a Zust. description X : X switching sequence ->T60 switching sequence ->T58 "0" position microswitch designation contacts Änderung Datum Name Industrieschaltgeräte D-7 Leingarten Datei: wiring diagram EK / 87C - 0e EK_87C_0.sch Größe A GB S / 9 Doc.-Id.: 7689 / / rd/kraft
20 A B C D E F top side S S S3 S "0" - position microswitch designation contacts bottom side X 5 X X X 5 6 connection designation 8 6 EK/89C BS definition of switch direction (top side/bottom side) according to M3673 GB switching sequence according to T60 GB cage clamp WAGO 36-08/000-0 (orange) Projektleiter: Sachbearbeiter : Sachbearbeiter : h g Zust. "0" position microswitch description X : X arrangement contacts ->T60 definition switch directions M3673 arrangement contacts -> T58 Änderung Zeichnung darf nur über CAD geändert werden Datum Name 00 Bearb. Gepr. Datum: Name: W. Gessmann GMBH Industrieschaltgeräte D-7 Leingarten Projektbeschreibung: S contacts Datei: wiring diagram EK / 89C - 0j EK_89C_0.sch Größe A GB S / f j i Doc.-Id.: 7689 / / rd/kraft 0
21 A B C D E F top side S S S3 S S5 "0" - position microswitch designation contacts X bottom side 8 X X 8 9 X 0 connection designation EK/05A BS definition of switch direction (top side/bottom side) according to M3673 GB switching sequence according to T60 GB cage clamp WAGO 36-05/000-0 Projektleiter: Sachbearbeiter : Sachbearbeiter : 003 Bearb. Gepr. Datum: Name: Projektbeschreibung: S Zeichnung darf nur über CAD geändert werden W. Gessmann GMBH 5 contacts e d c b a Zust. description X : X switching sequence -> T60 definition switch directions M3673 switching sequence -> T58 "0" - position microswitch Änderung Datum Name Industrieschaltgeräte D-7 Leingarten Datei: wiring diagram EK / 05A - 0e EK_05A_0.sch Größe A GB S / Doc.-Id.: 7689 / / rd/kraft
22 Doc.-Id.: 7689 / / rd/kraft
23 top side S S "0" - position microswitch designation contacts bottom side connection designation X=pol definition of switch direction (top side/bottom side) according to M37 GB switching sequence according to T60 GB X: pin contact strip pol. Type: SB-PHDSS JST Zeichnung darf nur über CAD geändert werden Zust. Änderung Datum Name 00 Datum: Name: Bearb Gepr W. Gessmann GMBH Industrieschaltgeräte D-7 Leingarten lever - switch S mit contacts connection diagram EK / 90B - 0 GB Datei: EK_90B_0GB.sch Größe A Seite v. 3 Doc.-Id.: 7689 / / rd/kraft
24 top side S S S3 S "0" - position microswitch designation contacts bottom side connection designation X=pol definition of switch direction (top side/bottom side) according to M37 GB switch sequence according to T60 GB X: pin contact strip pol. Type: SB-PHDSS JST Zeichnung darf nur über CAD geändert werden Zust. Änderung Datum Name 00 Datum: Name: Bearb Gepr W. Gessmann GMBH Industrieschaltgeräte D-7 Leingarten lever - switch S with contacts connection diagram EK / 9B - 0 GB Datei: EK_9B_0GB.sch Größe A Seite v. Doc.-Id.: 7689 / / rd/kraft
25 top side S S S3 S S5 "0" - position microswitch bottom side X=30pol. definition of switch direction (top side/bottom side) according to M37 GB switch sequence according to T60 GB X: pin contact strip 30 pol. Type: S30B-PHDSS JST designation contacts connection designation Zeichnung darf nur über CAD geändert werden Zust. Änderung Datum Name 00 Datum: Name: Bearb Gepr W. Gessmann GMBH Industrieschaltgeräte D-7 Leingarten lever - switch S with 5 contacts connection diagram EK / 07A - 0 GB Datei: EK_07A_0GB.sch Größe A Seite v. 5 Doc.-Id.: 7689 / / rd/kraft
26 Doc.-Id.: 7689 / / rd/kraft 6
27 A B C D E F top side S S "0" - position microswitch designation contacts 5 bottom side X X EK/9B BS X X 7 8 connection designation definition of switch direction (top side/bottom side) according to M379 GB switch sequence according to T60 GB X/X: flat connection,8/6,3mm Type: WEIDMÜLLER GSF5 Projektleiter: Sachbearbeiter : Sachbearbeiter : Zeichnung darf nur über CAD geändert werden 003 Bearb. Gepr. Datum: Name: W. Gessmann GMBH Projektbeschreibung: S3 contacts c b a Zust. description X : X switching sequence ->T60 switching sequence ->T58 Änderung Datum Name Industrieschaltgeräte D-7 Leingarten Datei: wiring diagram EK / 9B - 0c EK_9B_0.sch Größe A GB S / 7 Doc.-Id.: 7689 / / rd/kraft
28 A B C D E F top side S S S3 S "0" - position microswitch designation contacts bottom side X 5 X X X 5 6 connection designation 8 6 EK/95B BS definition of switch direction (top side/bottom side) according to M379 GB switching sequence according to T60 GB flat connection,8/6,3mm Type: WEIDMÜLLER GSF5 Projektleiter: Sachbearbeiter : Sachbearbeiter : Zeichnung darf nur über CAD geändert werden 003 Bearb. Gepr. Datum: Name: W. Gessmann GMBH Projektbeschreibung: S3 contacts d c b a Zust. description X : X switching sequence -> T60 switching sequence -> T58 "0" position microswitch Änderung Datum Name Industrieschaltgeräte D-7 Leingarten Datei: wiring diagram EK / 95B - 0d EK_95B_0.sch Größe A GB S / Doc.-Id.: 7689 / / rd/kraft 8
29 A B C D E F top side S S S3 S S5 "0" - position microswitch bottom side designation contacts 3 X X X 8 9 X 0 connection designation EK/08B BS definition of switch direction (top side/bottom side) according to M379 GB switching sequence according to T60 GB flat connection,8/6,3mm Type: WEIDMÜLLER GSF5 Projektleiter: Sachbearbeiter : Sachbearbeiter : 003 Bearb. Gepr. Datum: Name: Projektbeschreibung: S3 Zeichnung darf nur über CAD geändert werden W. Gessmann GMBH 5 contacts b a Zust. description X : X switching sequence -> T60 Änderung Datum Name Industrieschaltgeräte D-7 Leingarten Datei: wiring diagram EK / 08B - 0b EK_08B_0.sch Größe A GB S / 9 Doc.-Id.: 7689 / / rd/kraft
30 Doc.-Id.: 7689 / / rd/kraft 30
31 A B C D E F top side S S "0" - position microswitch designation contacts EK/96A BS bottom side X X 7 8 X X 7 8 connection designation definition of switch direction (top side/bottom side) according to M3750 GB switch sequence according to T60 GB cage clamp WAGO 36-0/000-0 (orange) Projektleiter: Sachbearbeiter : Sachbearbeiter : Zeichnung darf nur über CAD geändert werden 003 Bearb. Gepr. Datum: Name: W. Gessmann GMBH Projektbeschreibung: S contacts d c b a Zust. description X : X switching sequence ->T60 switching sequence ->T58 "0" position microswitch Änderung Datum Name Industrieschaltgeräte D-7 Leingarten Datei: wiring diagram EK / 96A - 0d EK_96A_0.sch Größe A GB S / 3 Doc.-Id.: 7689 / / rd/kraft
32 A B C D E F top side S S S3 S "0" - position microswitch designation contacts bottom side connection 8 designation X Projektleiter: Sachbearbeiter : Sachbearbeiter : Zeichnung darf nur über CAD geändert werden 003 Bearb. Gepr. Datum: Name: W. Gessmann GMBH Projektbeschreibung: S contacts e d c b a Zust. description X : X arrangement contacts ->T60 wiring contacts arrangement contacts -> T58 "0" position microswitch Änderung Datum Name Industrieschaltgeräte D-7 Leingarten Datei: wiring diagram EK / 0A - 0e EK_0A_0.sch Größe A GB S / EK/0A BS X X X definition of switch direction (top side/bottom side) according to M3750 GB switch sequence according to T60 GB cage clamp WAGO 36-08/000-0 Doc.-Id.: 7689 / / rd/kraft 3
33 33 Doc.-Id.: 7689 / / rd/kraft
34 top side S S S3 S "0" - position microswitch bottom side connection designation () () () () () () (3) (3) (3) () () () definition of switch direction (top side/bottom side) according to M3770 GB switch sequence according to T60 GB NO / NC / microswitch C / microswitch 0A with flat connection 6,3mm*0,8mm Zeichnung darf nur über CAD geändert werden Zust. Änderung Datum Name 00 Datum: Name: Bearb Gepr W. Gessmann GMBH Industrieschaltgeräte D-7 Leingarten lever - switch S5 with contacts connection diagram EK / 06-0 GB Datei: EK_06_0GB.sch Größe A Seite v. Doc.-Id.: 7689 / / rd/kraft 3
35 Notes 35 Doc.-Id.: 7689 / / rd/kraft
36 EAO Your Expert Partner for Human Machine Interfaces Headquarters: EAO AG Tannwaldstrasse Olten, Switzerland Subsidiaries: Austria Phone Fax sales.ede@eao.com Belgium Phone Fax sales.ebl@eao.com China Phone Fax sales.ehk@eao.com France Phone Fax sales.ese@eao.com Germany Phone Fax sales.ede@eao.com Italy Phone Fax sales.eit@eao.com Japan Phone Fax sales.esj@eao.com Netherlands Phone Fax sales.enl@eao.com Sweden Phone Fax sales.esw@eao.com Switzerland Phone Fax sales.ech@eao.com United Kingdom Phone Fax sales.euk@eao.com USA Phone Fax sales.eus@eao.com Other Countries Phone Fax HS.03/0. EAO reserves the right to alter specifications without further notice.
EAO Your Expert Partner for Human Machine Interfaces. EAO Product Information. Series 19
EAO Your Expert Partner for Human Machine Interfaces EAO Product Information Series Switches and Indicators Contents Description... 3 Product Assembly... 4 Devices raised mounting... 5 Accessories...
More informationEAO Your Expert Partner for Human Machine Interfaces. Special Vehicles Applications. Components and HMI Systems
EAO Your Expert Partner for Human Machine Interfaces Special Vehicles Applications Components and HMI Systems Human Machine Interface Systems High-reliability custom-built interfaces for emergency and
More informationSwitches and Indicators 84
Switches and Indicators 84 84 Switches and Indicators Index Series 84 Description Page 177 Product Assembly Page 178 Mounting Instruction Page 179 Product Range - pushbuttons for flush mounting - accessories
More informationElectro-Mechanical Counters
Electro-Mechanical Counters measuring monitoring analysing Input: pulse counter Display: 5, 6, 7 and 8 digits plastic Panel mounted : 4.5 V DC ; V DC ; 4 V DC ; 5 V AC ; 0 V AC KOBOLD offices exist in
More informationHan R 23. Circular Connector. Certified acc. to DIN EN ISO 9001 in design/ development, production, installation and servicing.
Circular Connector Certified acc to DIN EN ISO 9001 in design/ development, production, installation and servicing Data Sheet 0039-4 Circular Connectors Features Size R 23 Outer diameter 26 mm High contact
More informationSmart Box. Simple, compact and all-purpose.
Smart Box Simple, compact and all-purpose. www.eao.com Smart Box Simple, compact and all-purpose. EAO Smart Box: Snap-on, plug & play operator devices for industrial environments. A machine s operator
More informationJoysticks. Powerful. Robust and individual.
Joysticks Powerful. Robust and individual. www.eao.com Joysticks Powerful. Robust and individual. EAO, the expert partner for innovative, intuitive and reliable Human Machine Interfaces (HMIs), offers
More informationseries Subminiature snap-action switches
Rocker switches Product features Small, efficient snap-action switches up to 10 (1.) A 20 V AC or 10.1 A 12-20 V AC 1/4 HP Lateral approach from both directions possible due to mushroom-shaped actuator
More informationSN Series - Part Numbering
SN Series - Part Numbering Features Push-pull technology Miniature circular Light weight Low cost Applications Professional audio and video CCTV system Portable wireless radio Factory Automation Computers
More informationSupplementary instructions. Plug connector Harting HAN 8D. for continuously measuring sensors. Document ID: 30376
Supplementary instructions Plug connector Harting HAN 8D for continuously measuring sensors Document ID: 30376 Contents Contents 1 For your safety 1.1 Appropriate use... 3 1.2 Impermissible use... 3 1.3
More informationSurface Mount Terminal Blocks with Push-Buttons
Surface Mount Terminal Blocks with Push-Buttons Surface Mount Terminal Blocks with Push-Buttons Pin Spacing 4 mm, 8 mm 2060 Series Surface mount terminal blocks with CAGE CLAMP S connection and push-buttons
More informationGeneral Purpose Phenolic
Switch Features 8 Contact Ratings DC ratings optional Standard or light force versions available High temperature versions optional Agency approved long life versions optional Electrical Ratings and Operating
More informationODU DOCK and ODU ROB. Connectors for Docking and Robot Systems.
and ODU ROB Connectors for Docking and Robot Systems Robust Circular Connectors and ROB Applications Industrial robots Tool change and depot systems Cable connections for robot systems Test equipment Features
More informationPosition Transducers Pivot head mounting potentiometric up to 300 mm, IP54 Series TEX
Position Transducers Pivot head mounting potentiometric up to 300 mm, IP54 Series TEX Special features compact dimensions protection class IP54 mountable over back-lash free pivot heads with a large angle
More informationHan PCB termination. Han-Fast Lock PCB adapter for Han DD PCB adapter for Han DDD module
Han termination Contents Page Han-Fast Lock... 20.11 adapter for Han DD... 20.13 adapter for Han DDD module... 20.16 adapter for Han 40 A Axial module... 20.18 adapter for Han E... 20.20 adapter for Han
More informationSERIES SUBMINIATURE SNAP-ACTION SWITCHES
PRODUCT FEATURES Small, effi cient snap-action switch up to 10 (1.) A 20 V AC or 10.1 A 12-20 V AC 1/4 HP Lateral approach from both directions possible due to mushroom-shaped actuator Large selection
More informationDevices raised mounting
Devices raised mounting Illuminated actuator pushbutton Front protection Switching system Ø 29 mm Contacts Typ-Nr. e Illuminated actuator pushbutton IP 67 LL 1 NC - MA UT 14-476.36 1 4 17 12.15 M UT 14-436.36
More informationInterfaces Service and Field
Interfaces Service and Field Front Panel Interfaces Interfaces Service Receptacles Cable Entry Systems 02 TRANSFORMATOREN 03 MODLINK MSDD THE CONNECTION TO THE OUTSIDE WORLD A safe bet MARKET REQUIREMENTS
More informationData Sheet PCB Products
Data Sheet CB roducts Mounting and release options for the Omnimate Range 5.8 /5. BLZ 5.X 9F BLZ 5.8 18LH BLZ 5.8 7LH BLT 5.8LH BLZF 5.8 LH BLZ 5.X 7F BLZ 5.8 18LR BLZ 5.8 7LR BLT 5.8 LR BLZF 5.8 LR By
More informationItem No.: /
mounting adapter also for DIN 35 rail; % protected against mismating; Plate thickness 06x12 mm; Male connector; with snap-in mounting foot; 4-pole; pin spacing 35 mm / 0138 in; with 209-137 mounting adapter
More informationmodlink msdd Front panel interfaces
Tight and with full visibility The connecting mechanism of the Modlink MSDD with integrated locking mechanism allows the components to be used under protection class IP65. This protection class prevents
More informationNOTE: The F2 button and the 4 LED annunciators do not function on the LD-ACF-I. To use these features, ask about the LD-ACF-R4/R4A.
Large display AC frequency indicator The is a sophisticated microprocessorbased indicator designed specifically to monitor AC frequency. Intuitive scrolling text menus, (activated from the front panel),
More informationMulti-axial miniature joystick based on Hall Effect technology
Joystick with grip Multi-axial miniature joystick based on Hall Effect technology J... + space-saving design + highly reliable and long lifetime due to contactless Hall Effect technology + integrated third
More informationI N D I C AT O R L I G H T S
INDICATOR LIGHT Indicator Lights 7 64 3 7 64 33 7 4 66 4 7 7 66 43 7 8 68 Accessories 7 64 INDICATOR LIGHT INDICATOR LIGHT on demand fluorescent lamp, with or without anti-luminescence resistor Incandescent
More informationTOPJOB S Sensor/Actuator Terminal Blocks Pluggable Signal Level with Push-in CAGE CLAMP Reliability
TOPJOB S Sensor/Actuator Terminal Blocks Pluggable Signal Level with Push-in CAGE CLAMP Reliability TOPJOB S SEND THE RIGHT SIGNALS For the very first time, sensor/actuator wiring is pluggable between
More informationAccessories Cassette Style Mating Connectors
Description All 19" cassette style converters are equipped with either H11, H15, H15S4, or H15S2 male connectors. Mating female connectors are available as accessories. The four H- type connector versions
More informationMULTI CONNECTION SYSTEM Product Overview
MULTI CONNECTION SYSTEM Product Overview MCS MULTI CONNECTION SYSTEM Product Overview Sorted by Pin Spacing 2.5 mm MICRO* mm, 3.81 mm MINI 100% Mismating Protection mm MINI HD* mm MINI SL screw 714 Series
More informationSupplementary instructions. Plug connector Harting HAN 7D. For point level sensors. Document ID: 34456
Supplementary instructions Plug connector Harting HAN 7D For point level sensors Document ID: 446 Contents Contents For your safety.... Appropriate use.... General safety instructions.... Safety instructions
More informationTOPJOB S Sensor/Actuator Terminal Blocks with Push-in CAGE CLAMP Reliability
TOPJOB S Sensor/Actuator Terminal Blocks with Push-in CAGE CLAMP Reliability TOPJOB S SEND THE RIGHT SIGNALS. TOPJOB S Sensor/Actuator Terminal Blocks with Push-in CAGE CLAMP Reliability TWO IN ONE. WITH
More informationEAO Your Expert Partner for Human Machine Interfaces. EAO Product Information. Series 56
EAO Your Expert Partner for Human Machine Interfaces EAO Product Information Series Switches and Indicators Contents Description... 3 Product Assembly... 4 Mounting instruction... 6 Devices front mounting...
More informationParts Manual Kleen Sweep 32R Rider Sweeper
Parts Manual Kleen Sweep 32R Page 2 Table of Contents Side broom R.H., part 1... Side broom R.H., part 2... Front wheel drive... Accelerator... Steering... Seat group... Group of main sweeper roller, part
More informationIncremental Encoder with Hollow Shaft
Incremental Encoder Type RI 36-H n miniature industry encoder for high number of pulses n short mounting length n easy mounting procedure n Application e.g.: - Motors - Machine tools - Packaging Machines
More information4 C/O. Contact material AgNi AgNi gold-plated Nominal contact current Inrush current
Quattro-Relais Quattro Relay 4 Quattro Relay 4A4 Standard type / With LED and protection diode on request Quattro-Relais Order Code Order Code Quattro Relay 4 A 4 4 V DC N Type of relay Quattro Relay 4
More informationPosition Transducers Pivot head mounting potentiometric up to 300 mm, IP54 Series TEX
Position Transducers Pivot head mounting potentiometric up to 300 mm, IP54 Series TEX Special features compact dimensions protection class IP54 mountable over back-lash free pivot heads with a large angle
More informationFP-PS-4. Features. Installation
OPERATING INSTRUCTIONS FP-PS-4 FieldPoint Power Supply These operating instructions describe the installation, features, and characteristics of the FP-PS-4. Features The FP-PS-4 is a FieldPoint power supply
More informationPanorama rudder indicator TRI-2 Analogue or CAN input Approved according to MED Three extra large scales Long-life LED illumination Built-in dimmer
USER'S MANUAL Panorama rudder indicator TRI-2 Analogue or CAN input Approved according to MED Three extra large scales Long-life LED illumination Built-in dimmer DEIF A/S Frisenborgvej 33 DK-7800 Skive
More informationN20010-SER. NON-SPRING RETURN DAMPER ACTUATOR 20 Nm (177 lb-in) FOR ADJUSTABLE MODULATING CONTROL SPECIFICATIONS GENERAL FEATURES PRODUCT DATA
N20010-SER NON-SPRING RETURN DAMPER ACTUATOR 20 Nm (177 lb-in) FOR ADJUSTABLE MODULATING CONTROL GENERAL These direct-coupled damper actuators provide adjustable modulating control for: air dampers, VAV
More informationApplications
Han PCB adapter Contents Page Technical characteristics PCB adapter for Han DD... 20.02 Han DD Inserts with PCB adapter... 20.03 Technical characteristics PCB adapter for Han E... 20.04 Han E Inserts with
More informationMale connector; 6-pole; pin spacing 3.5 mm / in; 100% protected against mismating
Male connector; 6-pole; pin spacing 35 mm / 0138 in; % protected against mismating Item Male connector; 6-pole; pin spacing 35 mm / 0138 in; % protected against mismating Marking Business data Supplier
More information07. har-link INTERFACE CONNECTORS
. INTERFACE CONNECTORS The highest data rates in combination with perfect shielding characterize the connector. This way data can be passed on optimally within the control cabinet. The locking mechanism
More informationSales: Technical: Fax:
DATA SHEET Weatherproof Order code Manufacturer code Description 23-2650 PX0410/02S/5560 2 WAY FREE SOCKET MICRO BUCCANNEER 23-2652 PX0410/03S/5560 3 WAY FREE SOCKET MICRO BUCCANNEER (RC) 23-2654 PX0410/04S/4550
More informationAccessories Cassette Style Mating Connectors
Description All 19" cassette style converters are equipped with either H11-, H15-, H15S4, or H15S2 male connectors. Mating female connectors are available as accessories. The four H- type connector versions
More informationØ 11,4 21,5. M9 x 0,5 Ø 12 Ø 11,4. M9 x 0,5 Ø 12. M9 x 0,5
Subminiature 7 series Screw termination M9 8 contacts Degree of protection IP7 Solder termination Moulded versions Diameter, mm Male angled connector 8,, Ø,, Contacts Cable outlet Ordering-No. 99 00 70
More informationTest Fixtures for low PCB volumes MA xxx Change made easy
est Probes est Fixtures est Fixtures for low PCB volumes MA xxx Change made easy Catalogue 1.2 MA 350/F AS MA350 force up to 300 N usable area up to to 160 x 100 mm MA 3xx-series generous and free accessibility
More informationME PLC Multifunctional housing for complex electronics. Data sheet _en_01. 1 Description
Multifunctional housing for complex electronics Data sheet 105504_en_01 PHOENIX CONTACT 2013-04-08 1 Description The housings of the ME PLC 40... product group consist of a 40-mm wide housing base with
More informationCutter Option Installation Instructions
This kit includes the parts and documentation necessary to install the cutter option on the Zebra XiII, XiIII, and XiIIIPlus-Series printers. NOTE: The Cutter Option is not available for the 96XiIII. Adding
More informationLUMOTAST 25 selector switch 1-28 LUMOTAST 25 selector switch, ring nut fixing LUMOTAST 25 keylock switch 1-30 LUMOTAST 25 keylock switch 1-31
TAST General data TAST pushbutton range Illuminable pushbuttons and signal lamps. Please order lamps/leds separately. Mounting hole diameter: 6.2 mm 42 V/00 ma max. Water-jet proof IP65 Low profile Lamp
More informationODU MAC LC. Modular Attachable Connector System
Catalogue No. 1004 LC-a ODU MAC LC Modular Attachable Connector System ODU Steckverbindungssysteme GmbH & Co. KG, Pregelstr. 11, 84453 Mühldorf a. Inn, Germany Phone: +49/ 86 31/61 56-0, Fax: +49/ 86 31/61
More informationIBM. Rack Installation Instructions
IBM Rack Installation Instructions Review the documentation that comes with your rack cabinet for safety and cabling information. When installing your server in a rack cabinet, consider the following:
More informationRack Installation Instructions
Rack Installation Instructions Review the documentation that comes with your rack cabinet for safety and cabling information. When installing your server in a rack cabinet, consider the following: v Two
More informationMale connector; with fixing flanges; 6-pole; pin spacing 5.08 mm / 0.2 in; for screw or similar mounting types; for parallel or perpendicular mounting
Male connector; with fixing flanges; 6-pole; pin spacing 508 mm / 02 in; for screw or similar mounting types; for parallel or perpendicular mounting Item No: 231-636/019-000 Male connector; with fixing
More informationN20010, N NON-SPRING RETURN DAMPER ACTUATOR 20/34 Nm (177/300 lb-in) FOR MODULATING CONTROL SPECIFICATIONS GENERAL FEATURES PRODUCT DATA
N21, N341 NON-SPRING RETURN DAMPER ACTUATOR 2/34 Nm (177/3 lb-in) FOR MODULATING CONTROL SPECIFICATIONS Supply voltage Nominal voltage PRODUCT DATA 24 Vac 2%, 5/6 Hz; 24 Vdc -1...+2% 24 Vac, 5/6 Hz; 24
More informationSERIE 59. Rear clamp. Frontal clamp HIGH RESOLUTION HOLLOW SHAFT INCREMENTAL ENCODER FOR INDUSTRIAL APPLICATIONS
HIGH RESOLUTION HOLLOW SHAFT INCREMENTAL ENCODER FOR INDUSTRIAL APPLICATIONS Resolution up to 50.000 pulses per turn External diameter 58 mm Hollow shaft from Ø 10 to 14 mm Protection class IP67 according
More informationMInIMAT-Ec. flexible data recording highly accurate
Screwdriving technology Automation Air motors Air tools Handheld Screwdriver electric MInIMAT-Ec straight handle design - torque ranges between 0.03-18 nm pistol-grip design - torque ranges between 0.06-18
More informationServo Auto Collet Spindle SP00AC-SR12000
Servo Auto Collet Spindle SP00AC-SR12000 Applications Deburring Cutting Grinding Surface finish Brushing Polishing Low power buff Drilling Tapping SP00AC-SR12000 - closed loop servo driven pneumatically
More informationOperating voltages up to 40 kvdc Operating current up to 30 Amps Advanced contact technology Silver plated and gold plated contacts available High
Operating voltages up to 40 kvdc Operating current up to 30 Amps Advanced contact technology Silver plated and contacts available High performance insulation material General characteristics and technical
More informationPosition switches FD series
Position switches FD series Selection diagram 01 08 11 18 19 0 04 05 Ø 8 mm Ø 1, mm external rubber stainless steel stainless steel glass fibre rod gasket sphere sphere 51 5 5 5 56 41 4 adjustable lever
More informationData sheet... OMNIMATE Power - series BL/SL 7.62HP BLZ 7.62HP/04/180LR SN BK BX
Power on board #96 100% safety, 100% integration, 100% cost-effectiveness: The compact and efficient solution for UL-600V applications in the lower performance range (up to 12 kva). 29 A at 400V (IEC)
More informationService Manual EOS. Label Printer. Made in Germany
Service Manual Label Printer EOS Made in Germany Service Manual for the following products Description Type Label Printer EOS1 / 00 EOS1 / 00 EOS1 / 00 C EOS1 / 00 C EOS4 / 00 EOS4 / 00 EOS4 / 00 C EOS4
More informationMInIMAT-ec. flexible data recording highly accurate
Screwdriving technology Automation Air motors Air tools Handheld Screwdriver electric MInIMAT-ec straight handle design - torque ranges between 0.03-18 nm pistol-grip design - torque ranges between 0.06-18
More informationItem No.: /
Female connector; with angled solder pins; 4-pole; with locking levers; pin spacing 508 mm / 02 in; solder pin 06x mm; codable; Horizontal PCB mounting Item No: 232-264/039-000 Female connector; with angled
More informationMagnetic and Hydraulic-Magnetic Circuit Breaker
Description Single or multipole hydraulic-magnetic circuit breakers with trip-free - mechanism and toggle actuation. A choice of switching characteristics ensures suitability for a wide range of applications.
More informationM5 and M10 Routers Power Supply and Power Cord Component Replacement Instructions
M5 and M10 Routers Power Supply and Power Cord Component Replacement Instructions Part No. 530-003244-01 Revision 1 27 July 2000 This document describes how to remove and replace the AC and DC power supplies,
More informationseries Miniature snap-action switches
Sensors micro-signal switches Snap-action switches Tact and Key switches Foot switches Rotary switches Slide switches Toggle Switches Pushbutton switches Rocker switches Product features Friction contact
More informationMicroswitches MS Series
General purpose microswitches for heavier duty applications High precision snap action mechanism 16A 250V AC resistive rating (I th ) Wide range of actuator styles Screw terminals with self lifting plate
More informationSUBMINIATURE MICROSWITCHES - SEALED
SWITCHES.COUZET.COM MICOSWITCHES SUBMINIATUE MICOSWITCHES - SEALED VS - 88 Coil spring snap-action mechanism Wire lead or cable outputs, various terminal types with symmetric or asymmetric pinning Excellent
More informationMulti-axis controller V 8 / VV 8
Multi-axis controller V 8 / VV 8 /30 03 The multi-axis controller V 8 is a rugged switching device according IEC/EN 947-5- for electro-hydraulic applications.the modular design enables the switching device
More informationSafety switches for hinged doors
C Safety switches for hinged doors Selection diagram FR FM FX FZ FK 18 7 9 snap action overlapped CONTACT BLOCKS 21 NC 1NO+ CONDUIT ENTRIES Threaded conduit entries (standard) With cable gland assembled
More informationDTY-EPS DTY-EPU. w e DTY-EPP- - w e. t y. q DTY-EPU PSU-BR DTY-EPP-CC- L DTY-EPS. ZD1 ZD4 Tr1 Tr4
DTY-EPU....... DTY-EPS. q DTY-EPU.... DTY-EPS DTY-EPP-- PSU-BR q w ew r DTY-EPP-CC-L D ZDZD TrTr q r w e t y q w e r t y.. w e r 0-00 -- - -- 00--00 t URL http://www.koganei.co.jp y DTY-EPU Thank you very
More informationTechnical data: Pin Spacing
282 Female Connectors, Double-Row Pin Spacing: 3.5 mm Universal connection for all conductor types Unique, compact, double-row connector system for conductor cross sections up to 1.5 mm 2 High-density,
More informationMINIMAT-EC. Handheld Screwdriver electric
Screwdriving Technology Automation Air Motors Air Tools MINIMAT-EC straight handle design - torque ranges between 0.01-25 N m pistol-grip design - torque ranges between 0.06-18 N m angle head design -
More informationBreezeMAX Wi² and BreezeACCESS Wi² Quick Installation Guide
This Quick Installation Guide is intended for experienced installers. For more information refer to the relevant sections in the BreezeMAX Wi² and BreezeACCESS Wi² System Manual. Wi² Package Content Check
More informationGKN Stromag Light Cam / Light Cam M Geared Cam Limit Switches
Product catalogue Controls and Sensors GKN Stromag Light Cam / Light Cam M Geared Cam Limit Switches Intergrated Powertrain components, Systems and Solutions Couplings Clutches Gearboxes Driveshafts Brakes
More informationSafety switches with separate actuator
4 Safety switches with separate actuator Selection diagram VF KEYD VF KEYD1 VF KEYD VF KEYD VF KEYD VF KEYD6 VF KEYD VF KEYD10 ACTUATORS CONTACT BLOCKS 6 snap action overlapped FR FX FK FW 0 1 4 NC NO+1NC
More informationSUNCLIX Connection technology for photovoltaics
SUNCLIX Connection technology for photovoltaics Connection technology for photovoltaics Are you looking for innovative and reliable connection technology for your PV modules, inverters or the complete
More informationSCXI HIGH-VOLTAGE 8 4 MATRIX TERMINAL BLOCK
INSTALLATION GUIDE SCXI -1332 HIGH-VOLTAGE 8 4 MATRIX TERMINAL BLOCK Introduction This guide describes how to install and use the SCXI-1332 terminal block with your SCXI-1127 module. The SCXI-1332 terminal
More informationDocumentation KM2042. Sixteen channel digital output module with D-Sub Connector. Version: Date:
Documentation Sixteen channel digital output module with D-Sub Connector Version: Date: 2.0.0 2017-11-20 Table of contents Table of contents 1 Foreword... 5 1.1 Notes on the documentation... 5 1.2 Safety
More informationField bus connections Link structure BDC Link structure BDC, B-design. Brochure
Field bus connections, B-design Brochure Field bus connections, B-design Bus coupler with driver Direct field bus connection (BDC) Bus coupler with driver direct field bus connection Field bus protocol:
More informationModular Terminal Blocks and Terminal Strips with CAGE CLAMP, Series 260 to 262, Side-Entry
36 Modular Terminal Blocks and Terminal Strips with CAGE CLAMP, Series 260 to 262, Side-Entry Assembly Assembly of modular terminal blocks to terminal strips Mounting of an end plate screw fixing CAGE
More informationNPA. Pendant control station. business partner. Product description. General technical specifications. Technical specifications of the microswitches
NPA Pendant control station Product description The NPA pendant station is a control device for all industrial machinery. It operates as an auxiliary controller of electrical motors through a power interface,
More informationPosition switches FD series
Position switches FD series Selection diagram 01 08 10 11 18 19 0 04 05 Ø 8 mm Ø 1,7 mm external rubber stainless steel stainless steel glass fibre rod gasket sphere sphere 31 51 5 57 35 56 41 4 adjustable
More informationPRODUCT MARKING AND BARCODE IDENTIFICATION. up to Serial No Barcode/Label printer MACH4. Service Manual. Edition 11/06
PRODUCT MARKING AND BARCODE IDENTIFICATION up to Serial No. 9999 Barcode/Label printer MACH4 Service Manual Edition 11/06 copyright by cab / 9008553 / Q49 / 1 All specifications about delivery, design,
More informationNI 653x Cable Adapter
USER GUIDE NI 65x Cable Adapter Contents The NI 65x cable adapter interfaces with National Instruments high-speed digital I/O (DIO) devices. The cable adapter provides an easy way to connect the Very High
More informationAccessories Cassette Style Mating Connectors H11, H15, H15S2, H15S4
Description All 19" cassette style converters are equipped with either H11-, H15-, H15S4, or H15S2 male connectors. Mating female connectors are available as accessories. The four H-type connector versions
More informationModular Connector System with High Power, Signal, Fibre-Optic, Coaxial Contacts and Pneumatic Valves
Modular Connector System with High Power, Signal, Fibre-Optic, Coaxial Contacts and Pneumatic Valves 2 rue René Laennec 51500 Taissy France Fax: 03 26 85 19 08, Tel : 03 26 82 49 29 E-mail:hvssystem@hvssystem.com
More informationPHOENIX CONTACT Pin. SUBCON-PLUS M ARCNET, MULTI/MININET (B&R), SYSTEM 2003 (B&R), P-NET SUCONET K1, K2 (EATON/Moeller),
Fast connector with screw terminal block connection for fieldbus systems Data sheet 00287_en_02 PHOENIX CONTACT 207-04-2 Description The SUBCON-PLUS/... D-SUB series is specifically designed for use in
More informationonlinecomponents.com
Standard-type Connector- Conversion Units XWB CSM_XWB_DS_E Simplifies Connector and terminal block replacement, and requires less in-panel wiring. Mount to DIN Track or via screws. MIL Flat Cable Connectors
More informationStandard Buccaneer BUCCANEER FOR POWER
IP8 rating tested at 1.05kg/sq cm (15lb/sq in) 10m depth for weeks and.8kg/sq cm (10lb/sq in) 100m depth for hours IPK, Tested in accordance with DIN 0050/Part IPkk Water and dustproof to IP8 when mated,,,,,,
More informationDocumentation EM2042. Sixteen Channel Digital Output Module with D-Sub Connector. Version: Date:
Documentation Sixteen Channel Digital Output Module with D-Sub Connector Version: Date: 2.0 2016-08-03 Table of contents Table of contents 1 Foreword... 4 1.1 Notes on the documentation... 4 1.2 Safety
More informationConnector System for Circular Contacts
Connector System for Circular Contacts Introduction The diameter 1.5 mm and diameter 2.5 mm Connector System is designed for electronic and electrical applications in motor vehicles. It fullfils all requirements
More informationConveyor Belt Alignment Switches from IDEM
Conveyor Belt Alignment Switches from IDEM Data Sheet Die-Cast Models Python Line Series Stainless Steel Models Using Conveyor Belt Alignment Switches Application: Conveyor Belt Alignment switches are
More informationREDUNDANCY MODULE TSP-REM360 AND TSP-REM600
REDUNDANCY MODULE TSP-REM360 AND TSP-REM600 Operating Instructions Seite 1 Dimensions drawings: TSP-REM360 Weight: 0.882lb Gewicht: 0.40kg Seite 2 Dimensions drawings: TSP-REM600 Bottom view Top view Side
More informationInstruction Manual. ICENI/TB-02 Terminal Block Module (Type 2) Pub_ Issue 1
Instruction Manual ICENI/TB-02 Terminal Block Module (Type 2) Pub_3652 - Issue 1 Regulateurs Europa Ltd 2014 The contents of this document are the exclusive Property of Regulateurs Europa Ltd They must
More informationThe pages in this document have been extracted from a larger document and as such any page numbers are relevant only to the original document.
The pages in this document have been extracted from a larger document and as such any page numbers are relevant only to the original document. Rotary Encoder Solutions Limited Dutton Road Redwither Business
More information07. har-link Interface Connectors
. Interface Connectors The highest data rates in combination with perfect shielding characterize the connector. This way data can be passed on optimally within the control cabinet. The locking mechanism
More information3081 Test Leads Test Leads Test Leads
3081 Test Leads 4 mm safety plug system PVC-lead highly flexible, 0.8 mm 2 Safety plug at both ends Straight/angled, complying with Standard cable length: 500/1000/2000 mm Test Leads with Silicon-Isolation
More informationHARTING. Interface Connectors. People Power Partnership
11 5 HARTING Interface Connectors People Power Partnership Directory chapter 00 Modular metric high speed connectors, 2.0 mm pitch Page connector system general information......................... 00.04
More informationRLS - 51 Geared CAM Limit Switches
RLS - 5 Geared CAM Limit Switches 2 Page Title www.powerjacks.com Power Jacks is the largest and most experienced manufacturer of actuators and mechanical jacks in the UK. Our products are used in a wide
More informationActuating drive with spring return DSFY/16 Modulated actuating drive with spring return
ctuating drive with spring return DSFY/16 Modulated actuating drive with spring return Issue date: Feb. 27, 2006 Subject to change Contents Page Information about the device description... 2 Qualified
More informationAll in one... our LED Spotlight connectors
All in one... our LED Spotlight connectors LED - light- and connection technology Spotlight connectors for COBs from The Advantages at a glance Compatible to standardised spotlight moduls as to hole pattern
More information