Specifications and Part Numbers

Transcription

1 This appendix provides information on the part numbers of the router variants, SFP modules, product, power, and environmental specifications of the Cisco ASR 901S Series Aggregation Services Router components. It also contains safety and compliance information and technical specifications of the antenna. Components and Options, page 1 Product Specifications, page 4 Components and Options The tables in this section list the hardware parts and part numbers available for the Cisco ASR 901S Series Aggregation Services Router. Table 1: Part Numbers of Chassis Models and Accessory Options for the Cisco ASR 901S Series Aggregation Services Router Product ID (PID) Cisco Part Number Options (CPN) Description A901S-4SG-F-D 4 external ports (4 SFP) + 1 gland interface for internal ports (2 Cu), DC power supply A901S-3SG-F-D 4 external ports (3 SFP +1 Cu) + 1 gland interface for internal ports (1 Cu), DC power supply A901S-2SG-F-D 4 external ports (2 SFP + 2 Cu) + 1 gland interface for internal ports, DC power supply OL

2 Components and Options A901S-3SG-F-AH A901S-2SG-F-AH 3 external ports (3 SFP) + 1 gland interface for internal ports (2 Cu), AC PSU, 1 sec holdover for 1 PoE+ 3 external ports (2 SFP + 1 Cu) + 1 gland interface for internal ports (1 Cu), AC PSU, 1 sec holdover for 1 PoE A901S-CABLE-SM A901S-CABLE-MM A901S-MNT-POLE A901S-MNT-WALL CAB-CONSOLE-RJ45 A901S-INSTALL-KIT A901S-DC-O-1M= SL-A901-B Internal to external port fiber patch cable, single mode (minimum order: 1; maximum order: 4) Internal to external port fiber patch cable, multi mode (minimum order: 1; maximum order: 4) Pole Mount Kit accessories (maximum order: 1) Wall Mount Kit accessories (maximum order: 1) Console cable 6 feet with RJ45 and DB9F (maximum order: 1) Installation kit includes special screw driver (maximum order: 1) Dust cap for antenna (maximum order: 1) DC power cable, 16 AWG,3 core, 600 water resistant,1 meter, open end (maximum order: 1) Software license: Base license (maximum 1) 2 OL

3 Components and Options SL-A901-A= SL-A901-T= Software license: Advanced Metro IP license (includes all features provided in the Base License, plus advanced features) (maximum 1) Software license: ASR901 Timing Feature License (1588 Boundary Clock) (maximum 1) The router supports a wide range of SFP optics modules. The following table lists their part numbers. The operational temperatures supported for the optics are defined by individual SFP or SFP+ modules. Table 2: SFP Modules Supported Type Ethernet SFP Part Number GLC-LH-SM, GLC-LH-SMD, GLC-EX-SMD, GLC-ZX-SMD, GLC-LX-SM-RGD, GLC-SX-MM, GLC-SX-MMD, GLC-SX-MM-RGD, GLC-ZX-SM, GLC-ZX-SM-RGD, GLC-BX-U, GLC-BX-D, SFP-GE-L, SFP-GE-S, SFP-GE-Z, GLC-FE-100FX-RGD, CWDM-SFP-1470, CWDM-SFP-1490, CWDM-SFP-1510, CWDM-SFP-1530, CWDM-SFP-1550, CWDM-SFP-1570, CWDM-SFP-1590, CWDM-SFP-1610, ranging from DWDM-SFP-3033 to DWDM-SFP-6141 (40 wavelengths) The following table lists the part numbers of the spares supported on the Cisco ASR 901S Series Aggregation Services Router. Table 3: Part Numbers of Spares Supported on the Cisco ASR 901S Series Aggregation Services Router Product ID (PID) CABIP65C-SM-1M= CABIP65C-MM-1M= A901S-DC-O-1M= Cisco Part Number (CPN) Description Custom fiber cable [C], connects from external A901S port through the gland of any radio cell, 1 M in length, single mode Custom fiber cable {C}, connects from external A901S port through the gland of any radio cell, 1 M in length, multi mode DC power cable, 16 AWG,3 core,600 water resistant,1 meter, open end OL

4 Product Specifications A901S-CABLE-SM= A901S-CABLE-MM= A901S-MNT-POLE= A901S-MNT-WALL= SL-A901-A= SL-A901-T= Internal fiber patch cable, single mode Internal fiber patch cable, multi mode Pole Mount Kit accessories Wall Mount Kit accessories Software license: Advanced Metro IP license (includes all features provided in the Base License, plus advanced features). Software license: ASR901 Timing Feature License (1588 Boundary Clock) Product Specifications The following tables list product, power, and environmental specifications, and safety and compliance information for the Cisco ASR 901S Series Aggregation Services Router. Table 4: Cisco ASR 901S Series Aggregation Services Router Specifications Description Dimensions (H x W x D) Weight Specifications 15.5 inches high x 10.5 inches wide x 2.5 inches deep (39.37 cm x cm x 6.35 cm) lbs. (6.2 kgs [assembled FD chassis with top cover including two SFPs, antenna, and power supply unit]) lbs. (7.4 kgs [assembled FA chassis with top cover including two SFPs, antenna, and power supply unit]) FA chassis with power cord and cable: 0.50 lbs. (0.23 kgs) Pole mount bracket with small 8 screws: 1.94 lbs. (0.88 kgs) Pole and wall mount bracket: 8.15 lbs. (3.7 kgs) Band strap (2 nos.): 1.43 lbs. (0.65 kgs) Memory Flash memory: 128 MB (onboard flash) System memory: 512 MB (DDR3) Mounting options Pole mount kit Wall mount kit 4 OL

5 Product Specifications Ethernet ports FD chassis models External ports ( 4 x 1 SFP Gigabit Ethernet ), internal ports 2 x 10/100/1000 RJ-45 External ports (3 x 1 SFP Gigabit Ethernet + 1 x 10/100/1000 RJ-45), internal ports (1 x 10/100/1000 RJ-45) External ports (2 x 1 SFP Gigabit Ethernet + 2 x 10/100/1000 RJ-45) FA chassis models External ports (3 x 1 SFP Gigabit Ethernet ), internal ports (2 x 10/100/1000 RJ-45) External ports (2 x 1 SFP Gigabit Ethernet + 1 x 10/100/1000 RJ-45), internal ports (1 x 10/100/1000 RJ-45) Console port Fans Cabling Wi-Fi interface 1 (up to Kbps) Fan-less design Closed cable bay for external connections PCIe 1.1 interface to the host 2.4 GHz band operation 20 and 40 MHz channelization WEP, TKIP, AES, and WAPI hardware encryption Interoperable with legacy IEEE b devices 3.3 V power from the board U.FL connection to the antenna Optional serial EEPROM for storing the inventory and revision information (connected to the I2C bus of the CPU) Power supplies Mean Time Between Failure (MTBF) 1 power supply (AC or DC) 150,000 hours Table 5: Power Specifications Description Specifications OL

6 Product Specifications Power consumption DC-input power and power dissipation: 40 W for all DC models AC-input power and power dissipation: 40 W without PoE+ 70 W with 1 PoE+ (1-sec backup) 100 W with 2 PoE+ ports (1-sec backup on 1 PoE+ port only) AC input voltage and frequency DC power rating Vac, Hz DC-input voltage rating: 24 VDC, -48 VDC, -60 VDC DC-input current rating: 2.5 A maximum Power connector DC power connector with four-pin connector with 1 m cable (part number: ) DC power connector with four-pin connector with 10 m cable (part number: ) AC connector Table 6: Environmental Specifications Description Operational temperature Nonoperational temperature Non-operational temperature (Transportation or Storage, or both) Operational humidity Specifications -40 to 149 F (-40 to 65 C); optics used may limit the temperature range -40 to F (-40 to 46 C) plus solar radiation (GR-3108 Issue 2, Class 4) -40 to 158 F (-40 to 70 C) -40 to 113 F (-40 to +45 C) with solar loading -40 F (-40 C) for 72 hrs 158 F (70 C) for 72 hrs Section of GR-63 or Section 9.1 of ATIS F (40 C) and 95% RH for 96 hrs Section of GR-63 or Section 9.3 of ATIS <5% to 100%, RH condensing (GR-3108, Issue 2, Class 4) 6 OL

7 Product Specifications Relative humidity Non-operational humidity Operational altitude Non-operational altitude Operational mechanical shock Non-operational mechanical shock Operational vibration Non-operational vibration Cold start Hot start Non-operational Free-Fall Drop Pole mount kit non-operational vibration Earthquake, Zone 4 10% to 85%, noncondensing, ±5 % 5% to 95% RH 13,000 ft (4000 m) maximum 104 F (40 C) ambient Meets applicable requirements Section 8 of ATIS Equipment operates as intended between sea-level and 6000 ft (1800 m) at F (38 C) plus solar loading Equipment operates as intended between 6000 ft (1800 m) and ft (3900 m) at 69.8 F (21 C) plus solar loading for the equipment with pressure sensitive components (GR-3108 Issue 2, Class 4) ft For the range of 9.92 to lbs (4.5 to 9.0 kgs), target minimum velocity change input is 83 in./sec (2.11 m/s) and effective few fall drop height is 5.0 in. (0.127 m) (ENG-3396, Section 4.2.4) For the range of 9.92 to lbs (4.5 to 9.0 kgs) the range of peak acceleration input (trapezoidal pulse is between 55 to 70 G, with minimum velocity change of 166 in./sec (4.22 m/s) (ENG-3396, Section 4.3.4) All product categories: 0.41 G rms from 3 to 500 Hz with spectral break points of G/2/Hz at 10 Hz and 200 Hz and 5 db roll off at each end. (ENG-3396, Section.2.5) All product categories: 1.2 rms from 3 to 500 Hz with spectral break points of G/2/Hz. At 10 Hz and 100 Hz and 5 db roll off at each end. (ENG Rev2 [Test Method: IEC ]) -40 F (-40 C) F (46 C) plus solar radiation (optional 149 F [65 C]) (GR-3108 Issue 2, Class 4) Drop the unpackaged sample 3.9" onto a rigid surface. Drop 1 face, 2 edges, and 2 corners. (ENG Rev2 [Test Method: IEC ]) Dwells at resonant frequency for 100,000 cycles at 3G in each axis. Equipment complies with earthquake tests per sections and of GR-63 or ANSI TI-329 (GR-3108 Issue 2) OL

8 Product Specifications Table 7: Safety and Compliance Type Safety Standards UL/CSA IEC/EN IEC/EN AS/NZS EMC emissions FCC 47CFR15, Class B EN55022, Class B CISPR 22, Class B AS/NZS CISPR 22, Class B ICES 003, Class B VCCI, Class B KN 22, Class B CNS EN Voltage Changes, Fluctuations, and Flicker EN Power Line Harmonics KN 22 EN Power Line Harmonics EN Voltage Fluctuations and Flicker EMC immunity EN/IEC Electrostatic Discharge Immunity - Enclosure EN/IEC Radiated Immunity - Enclosure EN/IEC Electrical Fast Transient Immunity EN/IEC Surge EN/IEC Immunity to Conducted Disturbances Network Equipment Building Standards (NEBS) This product is designed to meet the following requirements: GR-63-CORE GR-1089-CORE GR-3108-CORE, Class 4 8 OL

9 Product Specifications ETSI/EN EN Telecommunications Network Equipment (EMC) EN55022 Information Technology Equipment (Emissions) EN55024 Information Technology Equipment (Immunity) EN Generic Immunity Standard Network synchronization GR-1244-CORE ITU-T G.813 ITU-T G.703 clause 5 ITU-T G.703 clause 9 ITU-T G.8261/Y.1361 ITU-T G.781 ITU-T G.8264 IEEE Ethernet 1000Base-T 100Base-T 100Base-FX 1000Base-S 1000BaseL 1000Base-Z 1000Base-E 1000Base-BX-U 1000Base-BX-D DWDM-SFP-GE: CWDM-SFP-GE: 10000Base-S 10000Base-L 10000Base-Z 10000Base-E DSPR Technical Requirement 2005 IEEE IEEE 802.3ae DSPR Technical Condition 2004 IEEE-802.3ah ANSI X ISO/IEC OL

10 Product Specifications 10 OL