Programmable DC Power Supplies 3.3 kw in 2U Built-in RS-232 & RS-485 Interface IEEE488.2 SCPI (GPIB) optional

Transcription

1 Now with Parallel Master/Slave Total Current Reporting & Optional IEEE Multi-Drop Interface Programmable DC Power Supplies 3.3 kw in 2U Built-in RS-232 & RS-4 Interface IEEE4.2 SCPI (GPIB) optional

2 The Genesys TM family of programmable power supplies sets a new standard for flexible, reliable, AC/DC power systems in OEM, Industrial and Laboratory applications. Features include: High Power Density 3.3kW in 2U Wide Range of popular worldwide AC inputs, 1ø (230VAC) & 3ø (VAC, 400VAC) Active Power Factor Correction (Single-Phase & Three-Phase AC Input) Voltage up to 0V, Current up to 400A Built-in RS-232/RS-4 Interface Standard NEW! Global Commands for Serial RS-232/RS-4 Interface Auto-Re-Start / Safe-Start: user selectable Last-Setting Memory High Resolution 16 bit ADCs & DACs Low Ripple & Noise Front Panel Lock selectable from Front Panel or Software Reliable Encoders for Voltage and Current Adjustment Constant Voltage/Constant Current auto-crossover Parallel Operation with Active Current Sharing; up to four identical units. NEW! Parallel Master / Slave. Current Sum, Program & Monitor via the Master Independent Remote ON/OFF and Remote Enable/Disable External Analog Programming and Monitoring (user selectable 0-V & 0-V) Reliable Modular and SMT Design 19" Rack Mount capability for ATE and OEM applications Five Year Warranty Optional Isolated Analog Programming and Monitoring Interface (0-V/0-V & 4-) Optional IEEE 4.2 SCPI (GPIB) Interface NEW! Multi-Drop IEEE Interface. LabView and LabWindows Drivers Worldwide Safety Agency Approvals; CE Mark for LVD and EMC Regulation Applications Genesys TM power supplies have been designed to meet the demands of a wide variety of applications. System Designers will appreciate new features such as Global and Single Byte Commands that will simplify programming and provide faster test sequence execution. Test Systems can be more noise immune by using the Optional IEEE Multi-Drop Interface with communication to optional Multi-Drop Slaves over RS-4 Interface. Higher power systems can be configured with up to four 3.3kW modules. Each module is 2U with zero space between them (zero stack). Flexible configuration is provided by the complete GenesysTM Family: 1U 70W Half-Rack, 1U 70W and W Full-Rack. All are identical in Front Panel, Rear Panel Analog, and all Digital Interface Commands. OEM Designers have a wide variety of Inputs and s from which to select depending on application and location. 1 Genesys 3.3kW-2U

3 Front Panel Description ON/OFF Switch 2. Air Intake allows zero stacking for maximum system flexibility and power density. 3. Reliable encoder controls Voltage and sets Address and Baudrate. 4. Volt Display shows Voltage and directly displays OVP, UVL and Address settings.. Reliable encoder controls Current and sets baud rate. 6. Current Display shows Current and displays Baud rate. Displays total current in Parallel Master/Slave Mode 7. Function/Status LEDs: Alarm Foldback Mode Fine Control Remote Mode. Pushbuttons allow flexible user configuration Coarse and Fine adjustment of Voltage/Current Preview settings and set Voltage/Current with OFF, Front Panel Lock Parallel Master/Slave Set OVP and UVL Limits Set Current Foldback Local/Remote Mode and select Address and Baud rate ON/OFF and Auto-Re-Start/Safe-Start Mode Rear Panel Description Preview Settings On , 1. Remote/Local Voltage Sense Connections. 2. DIP Switches select 0-V or 0-V Programming and other functions. 3. DB2 (Female) connector allows (Non-isolated) Analog Program and Monitor and other functions. 4. RS-4 OUT to other Genesys Power Supplies.. RS-232/RS-4 IN Remote Serial Programming. 6. Connections: Rugged busbars (shown) for up to V ; wire clamp connector for s >V. 7. Exit air assures reliable operation when zero stacked.. Input: 230VAC Single Phase (shown), & 400VAC Three Phase, 0/ Hz AC Input Connector: PHOENIX CONTACT Power Combicon PC 6/... Series with strain relief. 9. Optional Interfaces Position for IEEE 4.2 (GPIB) (shown) or Isolated Analog Programing Interface. 2

4 Genesys 3.3kW Specifications 1.0 MODEL 1.Rated output voltage(*1) 2.Rated Current(*2) 3.Rated Power 1.1 CONSTANT VOLTAGE MODE 1.Max.line regulation ( 0.01% of rated Vo+ 2 )(*6) 2.Max load regulation ( 0.01% of rated Vo+ )(*7) 3.Ripple and noise p-p MHz (*) 4.Ripple r.m.s Hz~1MHz.Remote sense compensation/wire V 6.Temp. coefficient PPM/ C 7.Temp. stability.warm-up drift 9.Up-prog. response time, 0~Vo Rated (*9).Down-prog response time Full-load (*9) No-load (*) 11.Transient response time 1.2 CONSTANT CURRENT MODE 1.Max.line regulation (0.01% of rated Io+ 2)(*6) 2.Max.load regulation (0.02% of rated Io+)(*11) 3.Ripple r.m.s Hz~1MHz. (*12) 4.Load regulation thermal drift.temp. coefficient 6.Temp. stability 7.Warm-up drift 1.3 PROTECTIVE FUNCTIONS 1. OCP 2. OCP Foldback 3. OVP type 4. OVP trip point 0~% Constant Current shut down when power supply change from CV to CC. User selectable. Inverter shut-down, manual reset by AC input recycle or by OUT button or by communication port command. 0.~V 0.~12V 1~1V 1~24V 2~36V 2~44V ~66V ~V ~1V ~16V ~330V ~6V. Under Voltage Limit Preset by front panel or communication port. Prevents from adjusting Vout below limit. 6. Over Temp. Protection User selectable, latched or non-latched. 1.4 ANALOG PROGRAMMING AND MONITORING 1.Vout Voltage Programming 0~%, 0~V or 0~V, user select. Accuracy and linearity:±0.% of rated Vout. 2.Iout Voltage Programming 0~%, 0~V or 0~V, user select. Accuracy and linearity:±1% of rated Iout. 3.Vout Resistor Programming 0~%, 0~/Kohm full scale,user select.,accuracy and linearity: ±1% of rated Vout. 4.Iout Resistor Programming 0~%, 0~/Kohm full scale,user select. Accuracy and linearity:±1.% of rated Iout..On/Off control (rear panel) By electrical. Voltage: 0~0.6V/2~1V,or dry contact,user selectable logic. 6. Current monitor 0~V or 0~V, Accuracy:±1%, user selectable. 7. Voltage monitor 0~V or 0~V,Accuracy:±1%,user selectable..power Supply OK signal TTL high (4~V) -OK, 0V-Fail 00ohm series resistance. 9. CV/CC Indicator CV: TTL high (4~V) source:, CC: TTL low (0~0.6V), sink current:.. Enable/Disable Dry contact. Open:off, Short: on. Max. voltage at Enable/Disable in: 6V. 11. Local/Remote analog control By electrical signal or Open/Short: 0~0.6V or short: Remote, 4~V or open: Local. 12. Local/Remote analog control Indicator Open collector, Local: Off, Remote: On. Maximum voltage: 30V, maximum sink current:. 1. FRONT PANEL 1.Control functions 2.Display 3.Indications 1.6 Interface RS232&RS4 or Optional GPIB Interface Model 1. Remote Voltage Programming (16 bit) Resolution (0.012% of Vo Rated) Accuracy (0.0%Vo Rated+0.0% of Vo Actual ) GEN V A W ms ms ms ms PPM/ C V PPM/ C of rated output voltage,following 30 minutes warm-up 0.0% of rated Vout over hrs interval following 30 minutes warm-up. Constant line, load & temp. Less than 0.0% of rated output voltage+2 over 30 minutes following power On Time for output voltage to recover within 0.% of its rated output for a load change -90% of rated output current. set-point: -%, local sense. Less than 1mSec for models up to and including V. 2msec for models above V Less than 0.1% of rated output current over30 minutes following load change. 0PPM/ºC from rated output current, following 30 minutes warm-up. 0.0% of rated Iout over hrs. interval following 30minutes warm-up. Constant line, load & temperature. Less than 0.2% of rated output current over 30 minutes following power On. Vout/ Iout manual adjust by separate encoders (coarse and fine adjustment selectable). OVP/UVL manual adjust by Volt. Adjust encoder. On/Off, on/off, Re-start modes (auto, safe), Foldback control (CV to CC), Go to local control. Address selection by Voltage (or current) adjust encoder. Number of addresses:31. Re-start modes (automatic restart, safe mode). Baud rate selection:,2400,400,90 and 19,0. Voltage: 4 digits, Accuracy: 0.% of rated output Voltage ±1 count. Current: 4 digits, Accuracy: 0.% of rated output current ±1 count. Voltage, Current, Alarm, Fine, Preview, Foldback, Local, On, Front Panel Lock, CVCC Remote Current Programming (16 bit) Resolution (0.012% of Io Rated) Accuracy (0.2% of Io Rated+0.1% of Io Actual ) Readback Voltage Resolution (0.012% of Vo Rated) Accuracy (0.1%Vo Rated+0.1% of Vo Actual ) Readback Current Resolution (0.012% of Io Rated ) Accuracy (0.3% of Io Rated+0.1% of Io Actual ) OVP/UVL Programming Resolution (0.1% of Vo Rated) Accuracy (1% of Vo Rated) *1: Minimum voltage is guaranteed to maximum 0.2% of rated output voltage. *2: Minimum current is guaranteed to maximum 0.4% of rated output current. *3: For cases where conformance to various safety standards (UL, IEC, etc ) is required, to be described as Vac (0/Hz) for single phase and 3-Phase V models, and 30~41Vac (0/Hz) for 3-Phase 400V models. *4: Single-Phase and 3-Phase V models: At Vac input voltage, 3-Phase 400V: At 30Vac input voltage. With rated output power. *: Not including EMI filter inrush current, less than 0.2mSec. *6: Single-Phase and 3-Phase V models: 170~26Vac, constant load. 3-Phase 400V models: 342~4Vac, constant load. *7: From No-Load to Full-Load, constant input voltage. Maximum drop in Remote Sense. *: For V~V models: Measured with JEITA RC-9131A (1:1) probe. For 0V model: Measured with :1 probe. *9: From % to 90% or 90% to % of Rated Voltage, with rated, resistive load. *:From 90% to % of Rated Voltage. *11: For load voltage change, equal to the unit voltage rating, constant input voltage. *12:For V~1V models the ripple is measured from 2V to rated output voltage and rated output current. For other models, the ripple is measured at ~% of rated output voltage and rated output current. 3 Genesys 3.3kW-2U

5 General Specifications Genesys 3.3kW 2.1 INPUT CHARACTERISTICS 1. Input voltage/freq. (*3) 2. Maximum Single Phase,230V models: Input current 3-Phase, V models: at % load 3-Phase, 400V models: 3. Power Factor (Typ) 4. Efficiency (*4). Inrush Current (*) 6. Hold-up time (Typ) GEN Single Phase,230V models: 170~26Vac, 47~63Hz VAC 3-Phase, V models: 170~26Vac, 47~63Hz 3-Phase, 400V models: 342~4Vac, 47~63Hz A Single Phase models: 0.99@230Vac, rated output power. 3-Phase models: 0.94@/30Vac, rated output power. % A Single-Phase and 3-Phase V models: Less than 0A 3-Phase 400V models: Less than A ms msec for Single-Phase and 3-phase V models, 6mSec for 3-Phase 400V models. Rated output power. 2.2 POWER SUPPLY CONFIGURATION 1. Parallel Operation 2. Series Operation Up to 4 identical units in master/slave mode Up to 2 identical units. with external diodes. 0V Max to Chassis ground 2.3 ENVIRONMENTAL CONDITIONS 1. Operating temp 2. Storage temp 0~0 C, % load. -30~ C 3. Operating humidity ~90% RH (non-condensing). 4. Storage humidity ~9% RH (non-condensing).. Vibration MIL-F, method 14., The EUT is fixed to the vibrating surface. 6. Shock Less than G, half sine, 11mSec. Unit is unpacked. 7. Altitude Operating: 00ft (0m), Derate output current by 2%/m above 00m, Alternatively, derate maximum ambient temp. by 1ºC/m above 00m. Non operating: 40000ft (m).. RoHS Compliance Complies with the requirements of RoHS directive. 2.4 EMC 1.Applicable Standards: 2.ESD 3.Fast transients 4.Surge immunity.conducted immunity 6.Radiated immunity 7.Magnetic field immunity.voltage dips 9.Conducted emission. Radiated emission 2. SAFETY 1.Applicable standards: 2.Withstand voltage 3.Insulation resistance IEC Air-disch.-KV, contact disch.-4kv IEC KV IEC KV line to line, 2KV line to ground IEC0-4-6, 3V IEC0-4-3, 3V/m EN60-4-, 1A/m EN EN022A, FCC part 1-A, VCCI-A. EN022A, FCC part 1-A, VCCI-A. CE Mark, UL90,EN90 listed. Vout 40V: is SELV, IEEE/Isolated analog are SELV. 40<Vout 400V: is hazardous, IEEE/Isolated analog are SELV. 400<Vout 0V: is hazardous, IEEE/Isolated analog are not SELV. Vout 40V models :Input-s (SELV): 4242VDC 1min, Input-Ground: 22VDC 1min. 40<Vout V models: Input-Haz. : VDC 1min, Input-SELV: 4242VDC 1min. Hazardous.-SELV: 1900VDC 1min, Hazardous -Ground:VDC 1min. Input-Ground: 22VDC 1min. <Vout 0V models: Input-Haz. : 4000VDC 1min, Input-SELV: 4242VDC 1min. Hazardous.-SELV: 30VDC 1min. Hazardous -Ground:2670VDC 1min. Input-Ground: 22VDC 1min. More than Mohm at 2 C, 70% RH. 2.6 MECHANICAL CONSTRUCTION 1. Cooling Forced air flow: from front to rear. No ventilation holes at the top or bottom of the chassis; Variable fan speed. 2. Dimensions (WxHxD) W: 423mm, H: mm, D: 440.mm (excluding connectors, encoders, handles, etc.) 3. Weight 13 kg. 4. AC Input connector (with Protective Cover) Single Phase,230V models, Power Combicon PC 6-16/3-GF-,16 series, with Strain relief. 3-Phase, V & 400V models, Power Combicon PC 6-16/4-GF-,16 series, with Strain relief.. connectors V to V models: Bus-bars (hole Ø.mm). V to 0V models: wire clamp connector, Phoenix P/N: FRONT-4-H RELIABILITY SPECS 1. Warranty years. All specifications subject to change without notice. Outline Drawing Genesys 3.3kW Units A A A POWER NOTE 2 NOTE 1 3 Phase Input Connector NOTE 2 NOTE 1. Bus bars for V to V models (shown) Wire clamp connector for V to 0V models 2. Plug connectors included with the power supply 3. Chassis slides mounting holes #-32 marked "A" GENERAL DEVICES P/N: C--S-116 or equivalent 4

6 Genesys Power Parallel and Series Configurations Parallel operation - Master/Slave: Active current sharing allows up to four identical units to be connected in an auto-parallel configuration for four times the output power. In Parallel Master/Slave Mode, total current is programmed and reported by the Master Series operation Up to two units may be connected in series to increase the output voltage or to provide bipolar output. (Max 0V to Chassis Ground). Remote Programming via RS-232 & RS-4 Interface Standard Serial Interface allows daisy-chain control of up to 31 power supplies on the same communication bus with built-in RS-232 & RS-4 Interface. Programming Options (Factory installed) Digital Programming via IEEE Interface IEEE 4.2 SCPI Compliant Program Voltage Program Current Measure Voltage Measure Current Over Voltage setting and shutdown Current Foldback shutdown Error and Status Messages New! Multi-Drop Allows IEEE Master to control up to 31 slaves over RS-4 daisy-chain Only the Master needs be equipped with IEEE Interface P/N: IEEE Isolated Analog Programming Four Channels to Program and Monitor Voltage and Current. Isolation allows operation with floating references in harsh electrical environments. Choose between programming with Voltage or Current. Connection via removable terminal block: Phoenix MC1,/-ST-3.1. Voltage Programming, user-selectable 0-V or 0-V signal. Power supply Voltage and Current Programming Accuracy ±1% Power supply Voltage and Current Monitoring Accuracy ±1.% Current Programming with 4- signal. Power supply Voltage and Current Programming Accuracy ±1% Power supply Voltage and Current Monitoring Accuracy ±1.% P/N: IS P/N: IS4 Genesys 3.3kW-2U

7 Power Supply Identification / Accessories How to order Models 3.3kW GEN Series Name Voltage (0~V) Current (0~400A) Factory Options: Option: IEEE IS IS4 - Factory AC Input Options: 1P230 (Single Phase 230VAC) 3P (Three Phase VAC) 3P400 (Three Phase 400VAC) Model GEN -400 GEN -330 GEN 1-2 GEN -16 GEN 30-1 GEN 40- Voltage VDC 0~V 0~V 0~1V 0~V 0~30V 0~40V Current ( A ) 0~400 0~330 0~2 0~16 0~1 0~ Power ( W ) Model GEN - GEN 0-42 GEN -33 GEN -22 GEN -11 GEN 0-. Voltage VDC 0~V 0~0V 0~V 0~V 0~V 0~0V Current ( A ) 0~ 0~42 0~33 0~22 0~11 0~. Power ( W ) 33 Factory options P/N RS-232/RS-4 Interface Built-in Standard - IEEE 4.2 (GPIB) Interface IEEE Voltage Programming Isolated Analog Interface IS Current Programming Isolated Analog Interface IS4 Accessories 1. Serial Communication cable RS-232/RS-4 cable is used to connect the power supply to the Host PC. Mode RS-4 RS-232 RS-232 PC Connector Communication Cable Power Supply Connector P/N DB-9F Shield Ground L=2m EIA/TIA-6A (RJ-4) DB-9F Shield Ground L=2m EIA/TIA-6A (RJ-4) DB-2F Shield Ground L=2m EIA/TIA-6A (RJ-4) GEN/4-9 GEN/232-9 GEN/ Serial link cable* Daisy-chain up to 31 Genesys power supplies. Mode Power Supply Connector Communication Cable P/N RS-4 EIA/TIA-6A (RJ-4) Shield Ground L=0cm GEN/RJ4 * Included with power supply Also available, Genesys TM 1U full Rack 70W/W & Half Rack 70W 6

8 Europe / North America NORTH AMERICA Lambda Americas, Inc. 40 Essex Rd. Neptune, NJ 0773 Tel: Fax: sales@lambda.com UK Lambda UK Kingsley Avenue Ilfracombe, Devon EX 34 ES United Kingdom Tel: Fax: powersolutions@lambda-europe.com FRANCE Lambda SAS, ZAC des Delaches BP 77 - Gometz le Chatel LES ULIS Tel: Fax: GERMANY Lambda GmbH Karl-Bold-Str.40, D-77 Achern, Germany Tel: Fax: info.germany@lambda-europe.com AUSTRIA Lambda GmbH Aredstrasse 22, A Leobersdorf, Austria Tel: Fax: info.germany@lambda-europe.com ITALY Lambda S.r.l. Via dei Lavoratori 12/130 IT 092 Cinisello Balsamo (MI) Tel: Fax: SCANDINAVIA Lambda Scandinavia PO Box 46 Rallarvägen 41 SE-14 2 Akersberga, Sweden Tel: Fax: Asia / Far East / Middle East JAPAN Densei Lambda KK, F Dempa Bldg, Higashigotanda, Shinagawa-Ku, Tokyo , Japan Tel: Fax: CHINA Shanghai Office of Wuxi Nemic-Lambda Electronic Co. Ltd. 4F 0 Hongmei Bldg, Hongmei Road, Cao He Jing Hi-Tech Park, Shanghai, China 0233 Tal: Fax: Densei-Lambda K.K. Beijing Office Room 1 Office Tower One, Beijing Junefield Plaza, No.6 Xuanwumenwai St., Xuanwu District, Beijing P.R.CHINA 02 Tel: Fax: HONG KONG Densei Lambda Hong Kong Branch Room., 27/F, Mega Trade Center 1 Mei Wan St. Tsuen Wan, N.T. Hong Kong Tel: Fax: KOREA Densei Lambda K.K. Korea Branch 6F Songok Bldg. 4-1 Soonae-Dong Pundang-Gu, Songnam-Shi Kyonggi-Do, Korea Tel: Fax: MALAYSIA Nemic-Lambda (M) SDN. BHD. No.7.3, 7th Floor, Jaya Shopping Center, Jalan Semangat Section 14, 46 Petaling Jaya Selangor, D.E, Malaysia Tel: Fax: SINGAPORE Nemic-Lambda (S) PTE Ltd. Blk Toa Payoh North # 06-01/0 Singapore Tel: Fax: ISRAEL Nemic Lambda Ltd. Sales Office: Kibbutz Givat Hashlosha Tel-Aviv 400, Israel Tel: Fax: Plant: POB 00 Karmiel Industrial Zone 1, Israel Tel: Fax: info@nemic.co.il Genesys 3.3kW - 2U Programmable DC Power Supplies AD1