PART NUMBER STRUCTURE TXH450_ EH P-DUKE Technology Co., Ltd. B: CLASS Il

Transcription

1 utomation Datacom IPC Industry Measurement Telecom utomobile Boat Charger Medical PV Railway PRT NUMBER STRUCTURE T H 450 U S pplication Package Code Dimension Code Output Power (W) Input Voltage (VC) Output Quantity Output Voltage (VDC) Protection Type Industry pplication :Open type E:Enclosed type U: Universal S:Single VC :V 15:15V 24:24V 28:28V 48:48V 53:53V Blank: CLSS I B: CLSS Il - F2 Option Blank: Fan connector with fixed fan speed control. Y: Fan connector with variable fan speed control. For TEH450 only: Fixed fan speed F1: Fan 1, fan on the top F2: Fan 2, fan on the side Variable fan speed Y1: Fan 1, fan on the top Y2: Fan 2, fan on the side Page 1

2 TH450 TECHNICL SPECIFICTION ll specifications are typical at 230VC input, full load and 25 unless otherwise noted Output 230VC Model Number Input Range Output Voltage Forced air cooling Natural convection Conduction cooling 21 CFM External Fan Input No Load Efficiency Internal Fan VC VDC W TH450US(-Y) TEH450US(-Y) TEH450US-F1(Y1) TEH450US-F2(Y2) TH450US15(-Y) TEH450US15(-Y) TEH450US15-F1(Y1) TEH450US15-F2(Y2) TH450US24(-Y) TEH450US24(-Y) TEH450US24-F1(Y1) TEH450US24-F2(Y2) TH450US28(-Y) TEH450US28(-Y) TEH450US28-F1(Y1) TEH450US28-F2(Y2) TH450US48(-Y) TEH450US48(-Y) TEH450US48-F1(Y1) TEH450US48-F2(Y2) TH450US53(-Y) TEH450US53(-Y) TEH450US53-F1(Y1) TEH450US53-F2(Y2) INPUT SPECIFICTIONS Operating input voltage range Input frequency Input current No load input power C input DC input C input 100VC and Full Load 240VC and Full Load 230VC TH(-Y), THE(-Y) TEH F (Y ) Leakage current Power Factor Start up time Rise time Hold up time Input inrush current Input protection Min. Typ. Max. Unit VC VDC Hz Vout,15Vout others Vout,15Vout others Watts 264VC 300 μ 2000 ms ms ms VC and Full Load 230VC Internal fuse in line and neutral T6.3/250VC Page 2

3 TH450 OUTPUT SPECIFICTIONS Output power Forced air cooling Conduction 230VC Natural 230VC Min. Typ. Max. Unit Watts ll Vout,15Vout others Vout,15Vout others *Please refer to the derating curve for detailed rating. Initial set voltage accuracy Line regulation Load regulation Voltage adjustability Minimum load Ripple and noise 230VC and Full Load Low Line to High Line at Full Load No Load to Full Load 10 Load to 90 Load Measured by 20MHz bandwidth With a 1μF/25V 06 X7R MLCC With a 0.1μF/100V 06 X7R MLCC Over voltage protection Over load protection Short circuit protection Vout 15Vout 24Vout 28Vout 48Vout 53Vout Peak deviation Recovery time of Vout(nom); Latch mode of Iout rated; Hiccup mode Protection level 1 (nominal) Protection level 2 (instantaneous high current) GENERL SPECIFICTIONS Isolation voltage 1 minute (Reinforced insulation) Isolation resistance Switching frequency 500VDC 230VC, Full load Storage temperature range Operating altitude Thermal shock Shock Vibration Relative humidity mvp-p Typ. Non-condensing Unit VC GΩ khz IEC/ EN/ UL g(16.29oz) 504g(17.77oz) 524g(18.48oz) 552g(19.47oz) 4.0 x 105 hrs Min. TH(-Y), TEH(-Y) TEH F (Y ) TH(-Y), TEH(-Y) TEH F (Y ) Max MIL-HDBK-217F Ta=25, Full load With derating TH(-Y) TEH(-Y) TEH F1(Y1) TEH F2(Y2) ENVIRONMENTL SPECIFICTIONS / Vout μs Continuous, automatics recovery Latch 5V at 2000m V at 500m Min. Input to Output Input (Output) to F.G Vout Other Design meet safety standard Weight Operating ambient temperature Load step from 50 ~ 75 change at 2.5/μs Standby power supply Fan power supply MTBF With a 1μF/50V 06 X7R MLCC Temperature coefficient Transient response Typ. Max. Unit m MIL-STD-810F IEC IEC to 95 RH Page 3

4 TH450 EMC SPECIFICTIONS EMI Level EN55011, EN55032 and FCC Part 15 Conducted Radiated Class B Class For optimum EMI performance, the power supply should be mounted to a metal plate grounded to all 4 mounting holes of the power supply. To comply with safety standards, this plate must be properly grounded to protective earth. Harmonic currents Voltage flicker ESD Radiated immunity Fast transient Surge Conducted immunity Power frequency magnetic field Dip and interruptions EN EN EN EN EN EN EN EN EN and EN55024 Full Load Class and D ir ± 15kV and Contact ± 8kV 3 V/m ± 2kV DM ± 1kV and CM ± 2kV 20 Vr.m.s 30 /m Perf. Criteria Perf. Criteria Perf. Criteria Perf. Criteria Perf. Criteria Perf. Criteria CHRCTERISTIC CURVE Derating Curve vs. mbient Temperature Vin=115VC and Natural convection Derating Curve vs. mbient Temperature Vin=230VC and Natural convection Derating Curve vs. mbient Temperature Vin=115VC and Conduction cooling Forced air cooling with 21CFM (External Fan) Derating Curve vs. mbient Temperature Vin=230VC and Conduction cooling Forced air cooling with 21CFM (External Fan) Derating Curve vs. mbient Temperature Vin=115VC and Forced air cooling (Internal Fan) Derating Curve vs. mbient Temperature Vin=230VC and Forced air cooling (Internal Fan) Page 4

5 TH450 CHRCTERISTIC CURVE (CONTINUED) Derating Curve vs. Input Voltage T H450 Efficiency vs. Output Load T H450US24 with Forced air cooling Efficiency vs. Input Voltage T H450US24 with Forced air cooling OUTPUT SENSING Output sensing function can be applied via connecting wires on CON3. Initially, Pin 7 and Pin 8 are shorted by a jumpper set as default, shown as Fig. 1. Fig. 1 Default connection But if remote control function is to be used, the jumpper on Pin 7 and Pin 8 should be removed. Since sense pins sould not be left open for module stability, please follow the connections as below (Fig. 2). (a) Sense pins connect to corresponding polarity of Vout pin (b) Sense pins connect to corresponding polarity terminal of load. Fig. 2 Recommended output sensing connections Page 5

6 TH450 MECHNICL DRWING TH450USXX (-Y) CONNECTORS CONNECTIONS CON1 Input Connector Line Neutral Molex housing : Molex crimp terminals : 2478,6838,45570 CON2 Output Connector,2,3,4,5 Pin 6,7,8,9,10 +Vout -Vout Molex housing : Molex crimp terminals : 5556,45750 CON3 ux Connector *Either one of four screw holes can be considered as PE connection for CLSS I application. 1. ll dimensions in inch [mm] 2. Tolerance : x.xx±0.02 [x.x±] x.xxx±0.01 [x.xx±0.25] 3. Screw 1 locked torque : MX 5.2Kgf-cm/1N.m TEH450USXX (-Y) Pin 2 Pin 4 Pin 5 +Fan +V Sense +Control +PG +5V Pin 6 Pin 7 Pin 8 Pin 9 Pin10 -Fan -V Sense -Control -PG -5V Molex housing : Molex crimp terminals : CONNECTORS CONNECTIONS CON1 Input Connector Line Neutral Molex housing : Molex crimp terminals : 2478,6838,45570 CON2 Output Connector,2,3,4,5 Pin 6,7,8,9,10 +Vout -Vout Molex housing : Molex crimp terminals : 5556,45750 CON3 ux Connector *Either one of four screw holes can be considered as PE connection for CLSS I application. 1. ll dimensions in inch [mm] 2. Tolerance : x.xx±0.02 [x.x±] x.xxx±0.01 [x.xx±0.25] 3. Screw 1 locked torque : MX 5.2Kgf-cm/1N.m Pin 2 Pin 4 Pin 5 +Fan +V Sense +Control +PG +5V Pin 6 Pin 7 Pin 8 Pin 9 Pin10 -Fan -V Sense -Control -PG -5V Molex housing : Molex crimp terminals : Page 6

7 TH450 MECHNICL DRWING (CONTINUED) TEH450USXX F1 (Y1) FN dimension: 50x50x10mm ir flow: 11.4 CFM The fan s life is shorter than power supply and has only 2 years warranty. CONNECTORS CONNECTIONS CON1 Input Connector Line Neutral Molex housing : Molex crimp terminals : 2478,6838,45570 CON2 Output Connector,2,3,4,5 Pin 6,7,8,9,10 +Vout -Vout Molex housing : Molex crimp terminals : 5556,45750 CON3 ux Connector *Either one of four screw holes can be considered as PE connection for CLSS I application. 1. ll dimensions in inch [mm] 2. Tolerance : x.xx±0.02 [x.x±] x.xxx±0.01 [x.xx±0.25] 3. Screw 1 locked torque : MX 5.2Kgf-cm/1N.m Pin 2 Pin 4 Pin 5 +Fan +V Sense +Control +PG +5V Pin 6 Pin 7 Pin 8 Pin 9 Pin10 -Fan -V Sense -Control -PG -5V Molex housing : Molex crimp terminals : Page 7

8 TH450 MECHNICL DRWING (CONTINUED) TEH450USXX F2 (Y2) FN dimension: 40x40x10mm ir flow: 9.5 CFM The fan s life is shorter than power supply and has only 2 years warranty. CONNECTORS CONNECTIONS CON1 Input Connector Line Neutral Molex housing : Molex crimp terminals : 2478,6838,45570 CON2 Output Connector,2,3,4,5 Pin 6,7,8,9,10 -Vout +Vout Molex housing : Molex crimp terminals : 5556,45750 CON3 ux Connector Pin 2 Pin 4 Pin 5 *Either one of four screw holes can be considered as PE connection for CLSS I application. 1. ll dimensions in inch [mm] 2. Tolerance : x.xx±0.02 [x.x±] x.xxx±0.01 [x.xx±0.25] 3. Screw 1 locked torque : MX 5.2Kgf-cm/1N.m +Fan +V Sense +Control +PG +5V Pin 6 Pin 7 Pin 8 Pin 9 Pin10 -Fan -V Sense -Control -PG -5V Molex housing : Molex crimp terminals : Tel Fax Web dd sale@pduke.com No. 36, 22nd Rd., Taichung Industrial Park, Taichung, Taiwan, R.O.C. Page 8

9 Headquarter Switzerland: Pewatron G Thurgauerstrasse 66 CH-8050 Zurich Phone info@pewatron.com Office Germany: Pewatron Deutschland GmbH Edisonstraße 16 D Unterschleißheim Phone info.de@pewatron.com We are here for you. ddresses and Contacts. Sales Germany & ustria Postcode Postcode Postcode ustria Postcode Postcode Geometrical sensors Sensor elements Kurt Stritzelberger Gerhard Vetter Thorsten Ravagni Phone Mobile Phone Mobile Phone kurt.stritzelberger@pewatron.com gerhard.vetter@pewatron.com thorsten.ravagni@pewatron.com Sales Switzerland & Liechtenstein Sales International Key ccounts Postcode Postcode Basil Frei Christian Mohrenstecher Peter Felder Phone Mobile Mobile Phone Mobile basil.frei@pewatron.com christian.mohrenstecher@pewatron.com peter.felder@pewatron.com Pressure Sensors Gas sensors / Gas sensor modules Load cells Flow / Level / Medical products Philipp Kistler Phone philipp.kistler@pewatron.com Dr. Thomas Clausen Phone thomas.clausen@pewatron.com Dr. driano Pittarelli Phone adriano.pittarelli@pewatron.com ccelerometers / Level Flow sensor elements Power supplies Linear position sensors ngle sensors Thorsten Ravagni Phone thorsten.ravagni@pewatron.com Sebastiano Leggio Phone sebastiano.leggio@pewatron.com Eric Letsch Phone eric.letsch@pewatron.com Drive technology CH Postcode / DE Drive technology CH Postcode / T / IT / FR Current sensors Power solutions Roman Homa Mobile roman.homa@pewatron.com Christian Mohrenstecher Mobile christian.mohrenstecher@pewatron.com Osman Coban Phone osman.coban@pewatron.com Sales Other Countries / Product Management Competitive sensor & power supply solutions worldwide