XMLK006B2C21 pressure sensor XMLK bar - G 1/4A mA - DIN - set of 1

Transcription

1 Characteristics pressure sensor XMLK bar - G 1/4A mA - DIN - set of 1 Complementary Pressure setting range Maximum permissible accidental pressure Destruction pressure Materials in contact with fluid Operating position Protection type Main Range of product Product or component type Pressure sensor type Pressure sensor name Electrical circuit type Pressure sensor size Local display OsiSense XM Electronic pressure sensors Pressure transmitter XMLK Control circuit 6 bar Without Controlled fluid Fresh water C Air C Fluid connection type G 1/4A (male) conforming to DIN 3852-E Electrical connection [Us] rated supply voltage Current consumption Type of output signal Analogue output function 1 male connector EN A (ex DIN43650) 4 pins 24 V DC, voltage limits: V < 20 ma Analogue Quantity per set Set of 1 Type of packing bar 12 bar 18 bar Nitrile (NBR) Stainless steel type AISI 303 Any position Load short-circuit Reverse polarity ma, 2-wire Individual Electromagnetic compatibility Immunity to magnetic fields conforming to EN/IEC test level 30 A/m (f = 50 Hz) Radiated RF fields conforming to EN/IEC test level 10 V (f = MHz) 1.2/50 µs shock waves immunity test conforming to EN/IEC test level 500 V 12 Ohm, 1 kv 42 Ohm Electrical fast transient/burst immunity test conforming to EN/IEC test level 2 kv Susceptibility to electromagnetic fields conforming to EN/IEC test level 10 V/m (f = MHz) Electrostatic discharge immunity test conforming to EN/IEC test level 8 kv air, 6 kv contact [Uimp] rated impulse withstand voltage Response time on output Drift of the sensitivity Drift of the zero point Measurement accuracy Repeat accuracy Mechanical durability Product weight Diameter Length 0.5 kv < 5 ms +/ % of measuring range/ K +/ % of measuring range/ K +/- 1 % of the measuring range +/- 0.3 % of the measuring range >= cycles 0.11 kg 36 mm 67.5 mm The information provided in this documentation contains general descriptions and/or technical characteristics of the performance of the products contained herein. This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications. It is the duty of any such user or integrator to perform the appropriate and complete risk analysis, evaluation and testing of the products with respect to the relevant specific application or use thereof. Neither Schneider Electric Industries SAS nor any of its affiliates or subsidiaries shall be responsible or liable for misuse of the information contained herein. Jul 26,

2 Environment Standards Product certifications Protective treatment CE EN EN EN EN/IEC EN/IEC CSA UL Ambient air temperature for operation C Ambient air temperature for storage C Vibration resistance 20 gn (f = Hz) conforming to EN/IEC Shock resistance 25 gn for 11 ms conforming to EN/IEC IP degree of protection IP65 conforming to EN/IEC NEMA degree of protection NEMA 4 TC Offer Sustainability Sustainable offer status RoHS Not Green Premium product Compliant - since Schneider Electric declaration of conformity 2

3 Dimensions Drawings Dimensions 3

4 Connections and Schema Wiring Diagram 2-Wire Technique (4-20 ma) (a) I out 4

5 Performance Curves Output Curves 5