SCADAPack Modbus multivariable transmitter

Transcription

1 Modbus multivariable transmitter The SCADAPack 4102 Modbus Multivariable Transmitter provides precise measurement of static pressure, differential pressure and temperature; and features an optional display that scrolls through a user-configured list of measured and calculated parameters when used with a Realflo flow computer. Setup, calibration, and verification of the 4102 is facilitated with the Realflo flow computer, or a stand-alone configuration application. Realflo provides a flexible calibration wizard for operator guidance during calibration & verification, resulting in a calibration report and auditable flow history records of the calibration adjustments, including as found, and as left records. As a digital transmitter, the product offers a choice of Modbus protocol over serial communications, or optionally, over Ethernet using Modbus and UDP. The 4102 includes an optional PID controller and analog output for use in a wide variety of installations such as remote locations requiring low power consumption, or as an addressed device offering control and measurement in an IP network.

2 schneider-electric.com 2 Specifications Accuracy and Stability Differential Pressure Accuracy 1 in % Span 2 Absolute Pressure Accuracy 1 in % Span 2 Span s Spans 10% Spans <10% Span s Spans 10% Spans <10% URL 2 URL 2 URL 2 URL 2,3 Differential & Absolute Pressure Accuracy Temperature Accuracy Stability Spans except A&U ±0.05 ±(0.005) (URL Span) Spans A&U ±0.10 ±(0.010) (URL Span) ±0.28 C (±0.5 F) (not including RTD uncertainties) <±0.05% of URL per year over 5 years Spans except A&U Spans A&U3 ±0.05 (Spans 5% URL) ±0.05 ±(0.005) (URL Span) ±(0.0025) (URL Span) (Spans <5% URL) Span Shift for a 0.7MPa (100psi) static press. change is ±0.01% of reading Static Pressure Effect on Differential Pressure Ambient Temperature Effect Zero Shift Span Zero shift for a 0.7 Mpa (100 psi) change: in % URL Zero Shift Span A and U ±0.050 J and M ±0.010 B and V ±0.007 K and P ±0.004 C and W ±0.002 L and R ±0.004 D and X ±0.010 G and Q ±0.010 F and Z ±0.007 H and S ±0.004 E and Y ±0.004 N and T ±0.004 Zero shift for a 0.7 Mpa (100 psi) change: in % URL Total effect for a 28 C (50 F) change for absolute and differential pressure is: ±(0.03%URL % Span) with following exceptions: Span codes A&U DP effect is: ±(0.18%URL % Span); Span codes J,K,L & M,P,R AP effect is: ±(0.02%URL % Span) Span codes G,H,N, & Q,S,T AP effect is: ±(0.15%URL % Span) Communications Serial Port Serial Protocol Optional Ethernet Port Optional Ethernet Protocols RS232/485 configurable, 1200 to baud Modbus RTU 10BaseT, terminal block connection Modbus/UDP, Modbus RTU in UDP Additional Features Optional Analog Output Optional PID Controller LCD Interface 0-20mA, 12 bit, sinking Fully configurable control of analog output relative to any measured variable 2-line interface with 13 characters, choice of displayed variables is configured by Realflo when used with the flow computer

3 schneider-electric.com 3 Specifications Physical Specifications Power Mass Environmental 9 to 30 VDC. 60mW with Serial (225mW with LAN communications) 3.5kg (7.8lb) without process connectors 5% RH to 95%, non-condensing, 40 C ( 40 F) to 70 C (158 F) Certifications ccsaus Explosion proof. Class I, Div. 1 Groups B, C and D Hazardous Locations ccsaus Class I, Div. 2 Groups A, B, C and D Hazardous Locations Temperature code T5 at maximum ambient, 70 C Provides non-incendive field circuits for RTD CSA certified to the following standards: CSA Std. C22.2 No. 213-M Class I, Division 2 Hazardous Locations CSA Std. C No. 142-M Control Equipment UL Std. No Class I and II, Division 2; Class III Hazardous (Classified) Locations UL Std No Energy Management Equipment ATEX: LCIE 07 ATEX 6058 Ex d IIC T6; -50 C Ta 70 C per IEC , protection type d (Flameproof) IECEx: CSA IECEx Ex d IIC T6; -50 C Ta 70 C per IEC , protection type d (Flameproof)

4 schneider-electric.com 4 Model TBUT4102E2A101U00N represents a sample code for a 4102 with Ethernet Model TBUT4102 Select: Product Description Modbus Multivariable Transmitter M A E Select: Output Signal Digital - Modbus Protocol, Jumper selectable RS232 or RS485, de-pluggable screw-type terminal block Digital - Modbus Protocol, Jumper selectable RS232 or RS485, de-pluggable screw-type terminal block, 1 Analog Output Digital - (1) RS485/232 with Modbus Protocol, (1) 10 BaseT Ethernet with Modbus/UDP protocol, 1 Analog Output Cover Sensor Material Sensor Fill Fluid Bolts Diaphragm NACE Certificate SS 316 SS Silicone CS-B7 Stainless Steel None N 316 SS 316 SS Silicone CS-B7 Stainless Steel Included *Diaphragm material option Nickel Alloy (equivalent to Hastelloy C) SS 316 SS Silicone CS-B7 Nickel Alloy3 None H 316 SS 316 SS Silicone CS-B7 Nickel Alloy3 Included Select: Differential & Absolute Pressure Span Limit Differential Pressure Absolute Pressure (Field Configurable for Gauge) Standard Sensor (Horizontal process connections with vertical mounting) A 0 to 30 inh2o (0 to 7.5 kpa) 0 to 100 psi (0 to 0.7 MPa) B 0 to 200 inh2o (0 to 50 kpa) 0 to 300 psi (0 to 2.1 MPa) C 0 to 840 inh2o (0 to 210 kpa) 0 to 300 psi (0 to 2.1 MPa) D 0 to 200 inh2o (0 to 50 kpa) 0 to 1500 psi (0 to 10 MPa) F 0 to 300 inh2o (0 to 75 kpa) 0 to 1500 psi (0 to 10 MPa) E 0 to 840 inh2o (0 to 210 kpa) 0 to 1500 psi (0 to 10 MPa) J 0 to 200 inh2o (0 to 50 kpa) 0 to 3000 psi (0 to 21 MPa) K 0 to 300 inh2o (0 to 75 kpa) 0 to 3000 psi (0 to 21 MPa) L 0 to 840 inh2o (0 to 210 kpa) 0 to 3000 psi (0 to 21 MPa) G 0 to 200 inh2o (0 to 50 kpa) 0 to 5300 psi (0 to 37 MPa) H 0 to 300 inh2o (0 to 75 kpa) 0 to 5300 psi (0 to 37 MPa) N 0 to 840 inh2o (0 to 210 kpa) 0 to 5300 psi (0 to 37 MPa)

5 schneider-electric.com 5 Model TBUT4102E2A101U00N represents a sample code for a 4102 with Ethernet Select: Differential & Absolute Pressure Span Limit Differential Pressure Absolute Pressure (Field Configurable for Gauge) Low Profile Sensor (Vertical process connections with vertical mounting) U 0 to 30 inh2o (0 to 7.5 kpa) 0 to 100 psi (0 to 0.7 MPa) V 0 to 200 inh2o (0 to 50 kpa) 0 to 300 psi (0 to 2.1 MPa) W 0 to 840 inh2o (0 to 210 kpa) 0 to 300 psi (0 to 2.1 MPa) X 0 to 200 inh2o (0 to 50 kpa) 0 to 1500 psi (0 to 10 MPa) Z 0 to 300 inh2o (0 to 75 kpa) 0 to 1500 psi (0 to 10 MPa) Y 0 to 840 inh2o (0 to 210 kpa) 0 to 1500 psi (0 to 10 MPa) M 0 to 200 inh2o (0 to 50 kpa) 0 to 3000 psi (0 to 21 MPa) P 0 to 300 inh2o (0 to 75 kpa) 0 to 3000 psi (0 to 21 MPa) R 0 to 840 inh2o (0 to 210 kpa) 0 to 3000 psi (0 to 21 MPa) Q 0 to 200 inh2o (0 to 50 kpa) 0 to 5300 psi (0 to 37 MPa) S 0 to 300 inh2o (0 to 75 kpa) 0 to 5300 psi (0 to 37 MPa) T 0 to 840 inh2o (0 to 210 kpa) 0 to 5300 psi (0 to 37 MPa) Select: Temperature Measurement 1 Terminal Blocks for Connection of External 100 Ohm Platinum RTD (DIN/IEC) Select: Connector Type 0 1/4 NPT, Threaded in Cover, with red plastic conduit cap 1 1/2 NPT, Flange Adapter c/w CS Grade B7 bolts Select: Transmitter Housing Material Conduit Entry Sizes 1 Epoxy-coated Aluminium (2) 1/2-14NPT SS (2) 1/2-14NPT

6 schneider-electric.com 6 Model TBUT4102E2A101U00N represents a sample code for a 4102 with Ethernet U X Select: Approvals CSA Class 1 - Div 1 (Groups B,C,D) & Div 2 (Groups A,B,C,D). Approved - Hazardous Locations IECEx to Exd IIC T6 and ATEX to EEx d IIC T6 Future Option 00 None Select: Connector Type Select Option group code required: N A B E F J None Digital Indicator (Black Epoxy) Digital Indicator (Black Epoxy), Stainless Steel Cover Bolts Digital Indicator (Stainless Steel) Digital Indicator (Stainless Steel), Stainless Steel Cover Bolts Stainless Steel Cover Bolts

7 schneider-electric.com 7 Dimensions with standard sensor mm in connection Conduit connection, both sides (Note 1) Optional custody transfer lock (seal) both ends connector (Note 2) Blind flange connection Allow 50 mm (2 in) clearance for cover removal, both ends. (Note5) Vent screw Plug Note No process connection (this end) Transmitter with Mounting Options M1 or M2 Extended cover used with optional LCD indicator FIELD TERMINALS External earth (ground) L-H Indicator low-high pressure side L-H External earth (ground) For surface mounting replace U-Bolt with two in diameter bolts of sufficient length to pass through bracket and surface. Optional side vent/drain (Note 3) connector (Note 2) Note Optional 4203 mounting bracket Vertical DN 50 or 2 in pipe shown. Rotate U-Bolt 90º for mounting to horizontal pipe. 1. Conduit connection 1/2 NPT or PG 13.5, both sides: plug unused connection with metal plug (supplied). 2. connectors may be removed and connections made directly to process cover using 1/4 NPT internal thread in process cover. 3. cover can be inverted making optional side vents or side drains. 4. connectors can be inverted to give either 51, 54, or 57 mm (2.0, 2.125, or 2.25 in) center-to-center distance between high and low pressure connections. 5. Topworks can be rotated to any position within one turn counterclockwise of the fully tightened position. 6. cover end plugs are substituted for vent screws when optional side vents (Note 3) are specified.

8 schneider-electric.com 8 Dimensions with low-profile sensor mm in Conduit connection, both sides (Note 1) Optional custody transfer lock (seal) both ends Allow 50 mm (2 in) clearance for cover removal, both ends. (Note5) Extended cover used with optional LCD indicator External earth (ground) FIELD TERMINALS Standard vent/drain, see Note 3. L-H connector (Note 2) Note Conduit connection 1/2 NPT, PG 13.5, both sides: plug unused connection with metal plug (supplied). 2. connectors may be removed and transmitter mounted directly on a manifold, or connections made directly to process cover using 1/4 NPT internal thread in process cover. 3. The transmitter s low profile structure LP1 is shown in the vertically upright position. Note the location of the standard vent/drain screw. In this configuration the transmitter can be vented or is self-draining. Also recommended is a horizontal installation where the installed orientation can be set to allow for venting or draining. 4. connectors can be inverted to give either 51, 54, or 57 mm (2.0, 2.125, or 2.25 in) center-to-center distance between high and low pressure connections. 5. Topworks can be rotated to any position within one turn counterclockwise of the fully tightened position. Telemetry & Remote SCADA Solutions 415 Legget Drive, Suite 101, Kanata, Ontario K2K 3R1 Canada Direct Worldwide: +1 (613) Fax: +1 (613) Toll Free within North America: +1 (888) Part number TBULM v Schneider Electric. All Rights Reserved. Schneider Electric, Modbus, Realflo and SCADAPack are trademarks and the property of Schneider Electric SE, its subsidiaries and affiliated companies. All other trademarks are the property of their respective owners. September 2015.