Cable Glands 757, BVE and 737 Series: Blanking Plugs, Adaptors and Reducers Increased Safety and Flameproof
|
|
|
- Florence Stephens
- 5 years ago
- Views:
Transcription
1 757 Series Blanking Plugs 737 Series Adaptors and Reducers BVE Series Plastic Blanking Plugs & Sealing Washers Compliance Data: 757 Series Blanking Plugs: ATEX IECEx CE Ex d IIC or Ex e II Ex td A21 IP 66/68 (10 m) or Ex nr II BVE Series Blanking Plugs: ATEX IEC CE Ex e II Ex td A21 IP Series Adaptors and Reducers: ATEX IECEx CE Ex d IIC or Ex e II Ex td A21 IP 66/68 (10 m) or Ex nr II Operating Temperature: -60 C to +100 C (757 Series Blanking Plugs and 737 Series Adaptors and Reducers) -40 C to +55 C (BVE Series Blanking Plugs) 410
2 757 Series Blanking Plugs Applications: A comprehensive range of blanking plugs designed to close any unused entries in electrical equipment. Care should be taken to ensure that a suitable entry thread sealing washer is also selected and installed, where applicable, to ensure that an effective seal is made at the entry, thereby maintaining the integrity of the enclosures or equipments IP rating. Catering to hazardous area applications, the range of products covers a number of different design types which are supplied in both metal and plastic (Exe only). Triple certification Ex d/ex e/ex nr. Nickel plated brass. Options: Brass version: remove last digit L stainless steel version: replace last digit 5 with 4. Plastic (see BVE series). 757 Series Blanking Plugs Certification Type 757 Conforming to ATEX 94/9/CE 0518 II 2 G 0518 II2 D Symbol of Protection ATEX Ex d IIC Ex e II Symbol of Protection IEC Ex nr II Ex td A21 T rating NA Surface Temperature NA -60 C to +100 C DC07001 SIRA 01 ATEX 1284U IEC Certificate IECEx SIR X Other Certifications GOST, UL, CSA IP66 or IP68 with seal Catalog Number Logic: Series: 757 Zone 1, 2, 21and 22 ATEX / IEC Certified Ex Standards EN / IEC ; ; ; ; Product Standards Other Standards EN / IEC (IP); EN (IK) 757 X X X X Type: D = Ex d & Ex e & Ex nr Male Thread Type: Male Thread Size: Material: = Brass 4 = 316L Stainless Steel 5 = Nickel Plated Brass Dimensions (mm) Flats Corners Catalog Numbers (Nickel Plated Brass) Weight A B C Metric* NPT (Kg) M16 x DM15 1/2" 757DT M20 x DM25 3/4" 757DT M25 x DM35 1" 757DT M32 x DM45 1-1/4" 757DT M40 x DM55 1-1/2" 757DT M50 x DM65 2" 757DT M63 x DM75 2-1/2" 757DT M75 x DM85 3" 757DT M90 x 2 757DM95 3-1/2" 757DT M100 x 2 757DM105 4" 757DT * IP68 with entry thread seal or o-ring not supplied (See accessories section) Dimensions (mm): Thread Table: C Metric NPT PG 1 M16 1/2" PG9 2 M20 3/4" PG11 3 M25 1" PG M32 1-1/4" PG16 5 M40 1-1/2" PG21 6 M50 2" PG29 7 M63 2-1/2" PG36 8 M75 3" PG42 9 M90 3-1/2" PG48 10 M100 4" 411
3 IP66 BVE Series Blanking Plugs Applications: A comprehensive range of plastic blanking plugs designed to close any unused entries in electrical equipment. Entry thread sealing washer supplied. Catering to hazardous areas, the range covers all metric threads from M16 to M50. Certification Ex e. Plastic. BVE Series Plastic Blanking Plugs & Sealing Washer Dimensions (mm) Weight B Metric (Kg) Volume Catalog Number M M M M M M Certification Type BVe Conforming to ATEX 94/9/CE 0081 II 2 G 0081 II2 D Symbol of Protection ATEX Symbol of Protection IEC Ex e II Ex td A21-40 C to +55 C 5C218 LCIE 03 ATEX 0011U IEC Certificate LCIE Ex U IP66 Ex Standards EN / IEC ; ; ; ; Product Standards / Dimensions (mm): 412
4 737 Series Adaptors & Reducers Applications: A wide range of thread conversion adaptors and reducers for hazardous area applications. Used to connect cable entry devices and equipment having dissimilar threads. Care should be taken to ensure that a suitable sealing gasket is also selected and installed, where applicable, to ensure that an effective seal is made at the entry, thereby maintaining the integrity of the enclosure or equipment IP rating. Triple Certification Ex d/ex e/ex nr. Nickel plated brass. Options: Aluminum: replace last digit 5 with 1. Brass version: remove last digit L stainless steel version: replace last digit 5 with Series Adaptors and Reducers Catalog Number Logic: Series: 737 Zone 1, 2, 21and 22 Certified 737 X X XX X XX X Type: D = Ex d & Ex e & Ex nr Male Thread Type: Male Thread Size: Female Thread Type: Material: = Brass 1 = Aluminum 4 = 316L Stainless Steel 5 = Nickel Plated Brass Female Thread Size: Male Thread Sizes M16* M20* M25* M32* M40* M50* M63* M75* 1/2" NPT 3/4" NPT 1" NPT 1-1/4" NPT 1-1/2" NPT 2" NPT 2-1/2" NPT 3" NPT 3-1/2" NPT 4" NPT M16* M20* M25* M32* M40* M50* M63* Female Tapping M75* 1/2" NPT 3/4" NPT 1" NPT 1-1/4" NPT 1-1/2" NPT 2" NPT 2-1/2" NPT 3" NPT 3-1/2" NPT 4" NPT Thread Table: Metric* NPT PG 1 M16 1/2" PG9 2 M20 3/4" PG11 3 M25 1" PG M32 1-1/4" PG16 5 M40 1-1/2" PG21 6 M50 2" PG29 7 M63 2-1/2" PG36 8 M75 3" PG42 9 M90 3-1/2" PG48 10 M100 4" * IP68 with entry thread seal or O-ring (not supplied) (See accessories section) Ex d/ex e reducer Ex d/ex e adaptor Non-certified adaptor 413
5 Reducers (Nickel Plated Brass) Male Female Thread Thread Catalog Number M20 M16 737DM2M15 M25 M16 737DM3M15 M25 M20 737DM3M25 M32 M20 737DM4M25 M32 M25 737DM4M35 M40 M25 737DM5M35 M40 M32 737DM5M45 M50 M32 737DM6M45 M50 M40 737DM6M55 M63 M40 737DM7M55 M63 M50 737DM7M65 M75 M50 737DM8M65 M75 M63 737DM8M75 3/4" 1/2" 737DT2T15 1" 1/2" 737DT3T15 1" 3/4" 737DT3T25 1-1/4" 3/4" 737DT4T25 1-1/4" 1" 737DT4T35 1-1/2" 1" 737DT5T35 1-1/2" 1-1/4" 737DT5T45 2" 1-1/4" 737DT6T45 2" 1-1/2" 737DT6T55 2-1/2" 1-1/2" 737DT7T55 2-1/2" 2" 737DT7T65 3" 2" 737DT8T65 3" 2-1/2" 737DT8T75 3-1/2" 2-1/2" 737DT9T75 3-1/2" 3" 737DT9T85 4" 3" 737DT10T85 4" 3-1/2" 737DT10T95 Certification Type 737 Conforming to ATEX 94/9/CE 0518 II 2 G 0518 II 2 D Symbol of Protection ATEX Ex d IIC Symbol of Protection IECEx Ex e II Ex td A21 T Rating N.A. Surface Temperature N.A. -60 C to +100 C DC07001 SIRA 01 ATEX 1284U IECEx Certificate IECEx SIR X Other Certifications GOST, UL, CSA IP66 or IP68 with seal Impact Resistance (shock) Adaptors (Nickel Plated Brass) Male Female Thread Thread Catalog Number M16 M20 737DM1M25 M20 M25 737DM2M35 M25 M32 737DM3M45 M32 M40 737DM4M55 M40 M50 737DM5M65 M50 M63 737DM6M75 M63 M75 737DM7M85 M75 M90 737DM8M95 M90 M DM9M105 M16 1/2" 737DM1T15 M20 1/2" 737DM2T15 M20 3/4" 737DM2T25 M25 3/4" 737DM3T25 M25 1" 737DM3T35 M32 1" 737DM4T35 M32 1-1/4" 737DM4T45 M40 1-1/4" 737DM5T45 M40 1-1/2" 737DM5T55 M50 1-1/2" 737DM6T55 M50 2" 737DM6T65 M63 2" 737DM7T65 M63 2-1/2" 737DM7T75 M75 2-1/2" 737DM8T75 M75 3" 737DM8T85 1/2" M20 737DT1M25 3/4" M20 737DT2M25 3/4" M25 737DT2M35 1" M25 737DT3M35 1" M32 737DT3M45 1-1/4" M32 737DT4M45 1-1/4" M40 737DT4M55 1-1/2" M40 737DT5M55 1-1/2" M50 737DT5M65 2" M50 737DT6M65 2" M63 737DT6M75 2-1/2" M63 737DT7M75 2-1/2" M75 737DT7M85 3" M75 737DT8M85 Ex Standards EN / IEC ; ; ; ; Product Standards Other Standards GOST, UL and CSA 414
Cable Glands. Description Introduction to Cable Glands 399. EEXe Series EEXe Series. A2F, E1FX/E2FX, E1FW/E2FW and T3 Series
Description Page Introduction to Cable Glands 399 EEXe Series 400-401 Polyamide Cable Glands for Unarmored Cable Increased Safety EEXe Series Ex e Certified Ex I Application Entry Thread Seal A2F, E1FX/E2FX,
Control Stations & Switches: Switches, Circuit Breakers and "Break Glass" Call Points SWE Series: 16 and 20 A Switches Increased Safety
SWE Series: 16 and 2 A Switches Increased Safety 16 A Version - Type 1 16 A Version - Type 2 2 A Version Compliance Data: ATEX - IEC: Zone 1 & 2, 21 & 22 ATEX IEC CE Ex de IIC T6 Ex td A21 T8 C IP66 -
Junction Boxes & Enclosures JBEA and ECEA Series: Aluminum Enclosures Increased Safety
PCe Type CAe Type Compliance Data: ATEX - IEC: ATEX IEC CE Ex ia IIC; Ex ib IIC T6 to T2 Ex td A21 T0 C to T290 C Ex de IIC Operating Temperatures: -40 C to +55 C (CAe) -55 C to +60 C (PCe) 223 ATX Product
Junction Boxes & Enclosures JBEP and ECEP Series: Undrilled Fiberglass Reinforced Polyester Enclosures Increased Safety
CSPe Type Small Version CAe Type Non-Hinged Version CAe Type Hinged Versions Compliance Data: ATEX - IECEx: Zone 1 & 1 & ATEX II GD IECEx CE Ex e II T6 to T Ex td A1 T75 C to T95 C Ex ia IIC; Ex ib IIC
SPECIALTY PRODUCTS. Flameproof housing Zones 1-2 and to encase video cameras. Used for onshore and offshore sites and process supervision.
SPECIALTY PRODUCTS Flameproof housing Zones 1-2 and 21-22 to encase video cameras. Used for onshore and offshore sites and process supervision. Description Page Camera Housing eries Video Camera Housings
Providing flexible power supply and signal connection there, where it is needed even in hazardous areas for the Zones 1and 2.
e X L i n k exlink 7-pole / 6-pole + PE for Zone 1 and Zone 21 Providing flexible power supply and signal connection there, where it is needed even in hazardous areas for the Zones 1and 2. The exlink 7
MRE Series 16 and 32 Amp Multiple Socket Outlets Stationary and Portable. Increased Safety
MRE Series 16 and 32 Amp Multiple Socket Outlets Applications Plugs and sockets are used with portable or stationary electrical equipment such as: Lighting systems Conveyors Heaters Motor generators Air
ATX MRE Series 16 and 32 Amp Multiple Socket Outlets Stationary and Portable. Increased Safety
Applications Plugs and sockets are used with portable or stationary electrical equipment such as: Lighting systems Conveyors Heaters Motor generators Air conditioning equipment Compressors Pumps For use
VALVES Inline 3/2-, 5/2- & 5/3 Spool valves electromagnetic actuated, indirectly controlled G 1/4, 1/4 NPT, G 1/2, 1/2 NPT
975 Inline 3/-, 5/- & 5/3 Spool valves electromagnetic actuated, indirectly controlled G /, / NPT, G /, / NPT For single and double operated actuators Closed crossover design Add-on manual override Rectified
CMP PRODUCTS CALL 1300 GLANDS CMP. Terminating Cables is our Business. Onshore Offshore Marine Mining Surface Underground
PRODUCTS Industrial and Explosive Atmosphere s and Conduit Accessories Terminating s is our Business CALL 1300 GLANDS Onshore Offshore Marine Mining Surface Underground Solutions complying with BS 6121,
Actuators. Stackable Contact Blocks (1, 2, or 3) with Contact Blocks
Unicode 2 Series: Actuators, Pilot Lights, Contact Blocks, Switches and Accessories Actuators Stackable Contact Blocks (, 2, or 3) Pilot Light Stackable Pilot Light with Contact Blocks Panel Mounting Adaptor
ATX JBEA and ECEA Series Aluminum Enclosures Increased Safety
Applications Designed for use in Zone 1 or 2 areas where flammable gases or vapors are present either continuously or intermittently. Ideal for use in wet or corrosive atmospheres. Petroleum, chemical,
EFP SERIES FLAMEPROOF ELECTRICAL CONNECTORS FOR HAZARDOUS ENVIRONMENTS
EFP SERIES FLAMEPROOF ELECTRICAL CONNECTORS FOR HAZARDOUS ENVIRONMENTS Table of Contents EFP Introduction 4 Connector Features 5-7 Code Logic 8 Inline Plug w Threaded Entry Metric 9 Inline Plug w Mechanical
Throughwiring. single-ended. twin-ended
Ordering details ellk 9... 18 W - 58 W Ordering details Type Version Terminals Throughwiring single-ended Throughwiring twin-ended Cable gland/ thread Threaded plug Blanking plug Order No. ellk 18/18 ellk
HERION SERIES Indirect solenoid actuated spool valves
HERION SERIES Indirect solenoid actuated spool valves for single and double acting actuators with NAMUR interface /2, /2, /, NC/APB, G/, G/2 Valves for safety systems up to SIL (IEC 08) Crossover-free
97105 NAMUR. Technical data. Ordering information and accessories See page 6 and 7
90 NAMUR /, / and / directional valves Actuation: electromagnetic Indirectly controlled soft seal spool valves Port size: G /, / NPT, G /, / NPT NAMUR-interface For single and double operated actuators
SCADAPack Modbus multivariable transmitter
SCADAPack 4102 Modbus multivariable transmitter 1 The SCADAPack 4102 Modbus Multivariable Transmitter is the flagship of our Ethernet transmitter product line, offering precise measurement of process pressure,
Operating pressure (bar) kv factor (m 3 /h) *3)
/ way poppet valves (stainless steel) electromagnetic actuated, directly controlled G /8, G /4 or /4 NPT Working from 0 bar up Assembled free of oil and grease Suited for fine vacuum down to,33 0 - mbar
CMP Cable Glands & Accessories
s & Accessories Australia & New Zealand PRODUCTS CALL 1300 GLANDS AUSTRALIA & NEW ZEALAND PRODUCT CATALOGUE - CALL 1300 GLANDS PRODUCTS CABLE GLAND SELECTION Products What We Promise for Your Business
Series Panel Mounted Control Devices
E_Master2012.qxd:NEW_E_Master_temp.qxd 1/27/12 4:28 PM Page 1 Series Features: Suitable for hazardous and corrosive locations. Installation is easy and precise. Devices fit into a standard 30.5mm, 1.2"
Technical Data. General specifications. Rated operating distance s n 3 mm
0102 Model Number Features Direct mounting on standard actuators Compact and stable housing with terminal compartment connection ATEX & IECEX certifications Usable up to SIL 2 acc. to IEC 61508 Weatherproof
Explosionproof Meter Housings
METER HOUSINGS Explosionproof Drilled and tapped to specification, attach layout sheet. Dimensions are internal. XJDGCH N4 XJDFGCH N4 4 1/8 x 4 1/8 X 3 XJMCGCH N4 6 3/4 x 6 3/4 x 3 XJTGCH N4 XJTFGCH N4
Terminal Boxes Series 8118
> Enclosure made of glass fibre reinforced polyester resin > sizes available > Terminals and cable glands fitted to order > Enclosure design with integrated metal bracket for metal cable glands. > Degree
Peppers Cable Glands Accessories Catalogue
Peppers Cable Glands Accessories Catalogue Introduction to Peppers For over 65 years, Peppers Cable Glands has been involved in the manufacture and sale of Cable Glands, giving the company a wealth of
Viamaster LED Series Luminaires For ATEX and IECEx Governed Hazardous Locations
Applications For use in locations where: Flammable gases, vapors and dusts are present A high degree of corrosion resistance is required Protection against dirt, water and moisture is necessary Typical
PROFIBUS-PA Positioner Type 3785
PROFIBUS-PA Positioner Type 3785 Application Single-acting or double-acting PROFIBUS-PA positioner for attachment to pneumatic control valves. Rated travel from 7.5 to 120 mm Opening angle up to 120 Smart,
26360, Inline. Technical data. Ordering information See page 2. For connector plugs see page 2 and data sheets N/en /2 5/2.
66, 87 Inline / and 5/ directional control valves NG 6 and Operation: elektromagnetic Indirectly controlled soft seal spool valves Port size: G /4 and G / For single and double operated actuators Manual
21023, 21025, 2/2 Direct solenoid actuated poppet valves
03, 05, / > > Port size: G/4, G/ > > Working from 0 bar up > > Suitable for mediumhigh vacuum down to.33 0 - mbar l/s > > Compact design > > Valves and solenoids are ATEX approved. Additional international
95100, 2/2 (stainless steel) Direct solenoid actuated poppet valves
9500, / (stainless steel) > > Port size: G/8, G/4, /4 NPT > > Working from 0 bar up > > Assembled free of oil and grease > > Suited for fine vacuum down to,33 0 - mbar > > For a.c. solenoid systems with
ER DATALOGGER ER-200. Bluetooth Communication Easy data transfer via wireless bluetooth Wireless range up to 32 ft (10m) No more cables required
ER DATALOGGER ER-200 The ER-200 Electrical Resistance (ER) Datalogger is ideal for use in any process media and remote locations where direct online operation is not possible. With builtin technology,
Pneumatic Control/Feedback
897 /Feedback Type 897 can be combined with... Compact design Integrated pilot valve with manual override Internal control air routing Bright LED position indicator Automatic end position adjustment Type
97105 Inline 3/2, 5/2 & 5/3 way spool valves electromagnetic actuated, indirectly controlled G1/4, 1/4 NPT, G1/2, 1/2 NPT
70 Inline 3/, / & /3 way spool valves electromagnetic actuated, indirectly controlled G/, / NPT, G/, / NPT Main application: single and double operated actuators TÜV-approval based on type examination
3/2 Directional control valves Direct solenoid operated poppet valves Internal thread G 1/2, 1/2 NPT or flanged with NAMUR interface
9805 / Directional control valves Direct solenoid operated poppet valves Internal thread G /, / NPT or flanged with NAMUR interface Main application: single operated actuators for plants TÜV-approval based
SCADAPack Modbus multivariable transmitter
Modbus multivariable transmitter The SCADAPack 4102 Modbus Multivariable Transmitter provides precise measurement of static pressure, differential pressure and temperature; and features an optional display
SIZE 1, 2 AND 3 POLYAMIDE PRE-DRILLED CONTROL STATIONS
SIZE, AND POLYAMIDE PRE-DRILLED CONTROL STATIONS 0986 00 0986 0 0986 0 0986 8 Size, and pre-drilled control stations with component fixed on the base* Compact enclosure, polyamide body and cover x M0 clearance
Flow Measurement SITRANS F M
Overview Mode of operation The flow measuring principle is based on araday s law of electromagnetic induction according to which the sensor converts the flow into an electrical voltage proportional to
26360, NAMUR. Technical data
66, 87 NAMUR /-, /- and / directional control valves Operation: elektromagnetic Indirectly controlled soft seal spool valves Port size: G/ NAMUR-Interface For single and double operated actuators Manual
Technical features. N/en
/, 5/ & 5/ spool valves electromagnetic actuated, indirectly controlled G /, / NPT, G /, / NPT or flanged with NAMUR interface For single and double operated actuators Exhaust air recirculation at way
Flow. Flow. N/en
/ poppet valves electromagnetic actuated, directly controlled G /4 or /4 NPT Working from 0 bar up Short switching times Suited for fine vacuum down to, 0 - mbar For a.c. solenoid systems with integrated
General Specifications
General Specifications Model MLX Loop Powered Process Indicator GS 60A02S01-01E-A The Model MLX Loop-Powered Process Indicator receives DC current signals from electronic transmitters and indicates process
DECONTACTOR METAL 20 A/32 A/63 A/125 A/200 A
X ECONTACTOR 20 A/32 A/63 A/125 A/200 A II2 G Ex de IIC, t 1 IP65 water-and dust-tight Integrated load-break switch Locking in connected or disconnected position by keying axis 178 X TECHNIL FEATURES X1
Operating pressure. N/en/en
660, 8007 NAMUR /, / & / way spool valves electromagnetic actuated, indirectly controlled G / and NAMUR interface For single and double operated actuators Manual override with and without detent Simple
Hazardous Location plug and receptacle
DX Hazardous Location plug and receptacle Main Advantages u u Rugged Construction, cost effective design Rated f Zone 1 and Zone 21 applications Features & Ratings p. 209 Certifications & Testing p. 210
2.3. Ex-Linear light fittings for fluorescent lamps. ellk W 58 W / ellm W 36 W (Zone 1, 2, 21, 22)
.3 Ex-Linear light fittings for fluorescent lamps ellk 9 18 W 58 W / ellm 9 18 W 36 W (Zone 1,, 1, ) The classic lighting solution in hazardous areas The ellk 9 linear luminaire series for fluorescent
Ex Junction Boxes & Control Stations
www.fibox.com Ex Junction Boxes & Control Stations Fibox Oy Ab Keilaranta D Espoo, Finland Tel. + () Fax. + () E-mail: info@fibox.fi Homepage: www.fibox.com Fibox Ltd. -, Songdo-Dong, Yeonsu-Gu, Incheon,
Series 3730 Electropneumatic Positioner Type
Series 3730 Electropneumatic Positioner Type 3730-0 Application Single-acting or double-acting positioner for attachment to pneumatic control valves Reference variable Travels 4 to 20 ma 5.3 to 200 mm
80265 series, 3/2 Indirect solenoid actuated poppet valve
> > Port size: G/... G > > High flow rate > > Optionally air pilot operated > > High repeatability of switching time > > Variable valve solenoid combination Technical features Medium: Compressed air, filtered,
3.2. Ex-d/e Cable Glands Metal Design. For Zone 1, 2, 21 and 22 according EN :2012 / IEC : 2011
.2 x-d/e Cable Glands Metal Design For Zone 1, 2, 21 and 22 according N 60079-0:2012 / IC 60079-0: 2011 Designed according to the latest standards For introducing cables or leads into metal housings, explosion-protected
Operating pressure (bar)
/ poppet valves electromagnetic actuated, directly controlled G /4, /4 NPT, G /, / NPT or flanged with NAMUR Interface Main application: single operated actuators for plants Valves for safety systems up
Grounding Systems / Ground Monitoring Device Series 8146/5075 and 8125/5071
www.stahl.de > Monitored electrostatic grounding of tank containers and drums during loading > Continuous monitoring of correct grounding > Robust design > Weather-protected plastic enclosure (IP66) or
MODEL: 6DV-B. [2] TERMINAL BLOCK 0: None (Euro terminal block at the rear of indicator module)
![MODEL: 6DV-B. [2] TERMINAL BLOCK 0: None (Euro terminal block at the rear of indicator module)](/thumbs/80/81759350.jpg "MODEL: 6DV-B. [2] TERMINAL BLOCK 0: None (Euro terminal block at the rear of indicator module)")
Field-mounted Two-wire Signal Conditioners 6-UNIT -DIGIT LOOP POWERED INDICATOR (outdoor enclosure, intrinsically safe/explosion-proof) Functions & Features -digit LED display No external power source
97105 Inline 3/2, 5/2 & 5/3 spool valves electromagnetic actuated, indirectly controlled G 1/4, 1/4 NPT, G 1/2, 1/2 NPT
705 Inline 3/, 5/ & 5/3 spool valves electromagnetic actuated, indirectly controlled G /, / NPT, G /, / NPT For single and double operated actuators Valves for safety systems up to SIL (IEC 6508) Crossover-free
NELES ND7000 DIGITAL VALVE CONTROLLER
NELES ND7000 DIGITAL VALVE CONTROLLER Metso's Neles ND7000 is a digital valve controller designed to operate on all control valve actuators and in all industry areas. ND7000 is a reliable and future-proof
Technical features. 12/ f. N/en
/, / & / way spool valves electromagnetic actuated, indirectly controlled G /, / NPT, G /, / NPT or flanged with NAMUR interface Main application: single and double operated actuators TÜV-approval based
Pneumatic Control/Feedback
897 /Feedback Type 897 can be combined with... Compact design Integrated pilot valve with manual override Internal control air routing Automatic end position adjustment With ATEX II cat. G/D and cat. D/G
Linear Luminaire with LED Series EXLUX 6002/1 Version IIB+H2
> For use in hazardous areas with gas group IIB+H 2 > Latest LED technology with a high luminous efficacy and a long service life > As pendant light fitting or pole mounted light fitting > Central locking
Flow Measurement SITRANS F M
low sensor MAG P Overview Mode of operation The flow measuring principle is based on araday s law of electromagnetic induction according to which the sensor converts the flow into an electrical voltage
COSASCO Bluetooth Suite
COSASCO Bluetooth Suite ER Probe Reader Bluetooth Kit The ER Probe Reader Bluetooth Kit is a convenient and portable standard Electrical Resistance (ER) instrument kit for measuring corrosion rate in any
Operating pressure. N/en/en
660, 8007 NAMUR /, / & / spool valves electromagnetic actuated, indirectly controlled G / and NAMUR interface For single and double operated actuators Manual override with and without detent Simple design
Push Button & Selector Switch Components. Operator Protective Boots EXPLOSIONPROOF AUXILIARY DEVICES EXPLOSIONPRROOF AUXILIARY DEVICES
Push Button & Selector Switch Components XMB XHDPL Operator locking caps and actuator devices can be adapted to existing explosion proof operators. Simple installation requires removal of top cap and threading
Series 95000, 2/2 Direct solenoid actuated poppet valve
> Port size: /4 (ISO G or NPT), G/ > Working from 0 bar up > Short switching times > Suited for fine vacuum down to,33 x 0 - mbar > For a.c. solenoid systems with integrated rectifier (40... 60 Hz) > Variable
Viamaster LED Series Luminaires For NEC and CEC Governed Hazardous Locations
Class I, Division, Groups A, B, C, D Class I, Zone, Group IIC Class II, Division, Groups F, G Zone, Group IIIB Type R,, X Applications For use in locations where: Flammable gases, vapors and dusts are
Connect. Cable glands, locknuts and accessories
Connect Cable glands, locknuts and accessories 234 Our range of xxxxxxxxxx cable glands has been expanded to offer the most high quality glands available. Our wide range includes BW, CW, and A1/A2 gland
FICHA TÉCNICA DE PRODUTO
FICHA TÉCNICA DE PRODUTO PRODUCT DATASHEET HMI Automação e Instrumentação, Lda. Rua dos 5 Caminhos, nº 570 4780-382 Santo Tirso PORTUGAL Web: www.hmi.pt Tel. +351 252 850 501 Fax. +351 300 013 487 Email:
DMP 333 DMP 333. Industrial Pressure Transmitter For High Pressure. Stainless Steel Sensor. Pressure Transmitter. Industrial
DMP Industrial Pressure Transmitter For High Pressure Stainless Steel Sensor accuracy according to IEC 60770: standard: 0.5 % FSO option: 0.5 / 0. % FSO Industrial Pressure Transmitter DMP Nominal pressure
MODEL: 6DV-B. [2] TERMINAL BLOCK 0: None (Euro terminal block at the rear of indicator module)
![MODEL: 6DV-B. [2] TERMINAL BLOCK 0: None (Euro terminal block at the rear of indicator module)](/thumbs/95/126294523.jpg "MODEL: 6DV-B. [2] TERMINAL BLOCK 0: None (Euro terminal block at the rear of indicator module)")
Field-mounted Two-wire Signal Conditioners 6-UNIT -DIGIT LOOP POWERED INDICATOR (outdoor enclosure, intrinsically safe/explosion-proof) Functions & Features -digit LED display No external power source
Technical Datasheet #TDAXTC20 Thermocouple Scanner 20 Thermocouple Channels CAN, SAE J1939 with Electronic Assistant P/N: AXTC20 Description:
Technical Datasheet #TDAXTC20 Thermocouple Scanner 20 Thermocouple Channels CAN, SAE J1939 with Electronic Assistant P/N: AXTC20 Description: The Thermocouple Scanner monitors up to 20 thermocouples and
Cable End Boxes Series 8146
> Enclosures glass fibre reforced polyester res > For termals from 35... 185 mm 2 > Rated operational current up to max. 400 A dependg on enclosure version and size > Degree of protection IP55 www.stahl.de
Technical Datasheet. Connectors, Plugs & Sockets. Table of Contents. Selection Guide 2. 16A Range (ELCX ) 3. 32A Range (ELCX
Connectors, Plugs & s Technical Datasheet Table of Contents Selection Guide 2 16A Range (ELCX 0251..) 3 32A Range (ELCX 0252..) 5 63A Range (ELCX 0253..) 7 125A Range (ELCX 0254..) 9 Elecex Ltd, Unit 9,
FLEX Ex Spring Clamp Terminal Base
Installation Instructions FLEX Ex Spring Clamp Terminal Base (Cat. No. 1797-TB3S) 1 10 11 4 Only remove this cover plug if connecting another terminal base unit. 3 5 6 12 2 7 8 9 41253 Component Identification
Technical Data. General specifications Switching element function PNP NO/NC Rated operating distance s n 5 mm
Model Number Features 5 mm flush ATEX-approval for zone and zone Accessories BF 8 Mounting flange, 8 mm EXG-8 Quick mounting bracket with dead stop Technical Data specifications Switching element function
Threaded thermocouple Miniature design Model TC10-D
Temperature Threaded thermocouple Miniature design Model TC10-D WIKA data sheet TE 65.04 for further approvals see page 2 Applications Machine building, plant and vessel construction Propulsion technology
TYPE APPROVAL CERTIFICATE
Page 1 / 6 File number: ACE15/777/1 Product code: 2532H This certificate is not valid when presented without the full attached schedule composed of 7 sections www.veristar.com This certificate is issued
Linear Luminaire with LED Series 6412/5
> For use in Zones 2, 21 & 22 > Latest LED technology with a high luminous efficacy and a long service life > Extra flat version for low mounting depth > Powder-coated sheet-steel or brushed stainless
YT-870 / 875 Series. Rotork YTC Limited VERSION 1.06
PRODUCT MANUAL Rotork YTC Limited VERSION 1.06 Contents 1 Introduction... 3 1.1 General Information for the users... 3 1.2 Manufacturer Warranty... 3 1.3 Explosion Proof Warning... 4 2 Product Description...
Threaded resistance thermometer Miniature design Model TR10-D
Temperature Threaded resistance thermometer Miniature design Model TR10-D WIKA data sheet TE 60.04 for further approvals see page 2 Applications Machine building, plant and vessel construction Propulsion
97100 NAMUR series, 3/2 & 5/2 Indirect solenoid actuated spool valve
9700 NAMUR series, / & / > > Port size: /4 (ISO G or NPT), NAMUR Interface > > Crossover-free switching > > Main application: Single and double acting actuators > > / way valve usable as / way valve >
Emergency Luminaire for Fluorescent Lamps Series EXLUX 6009
> As wall, ceiling and pendant light fitting or pole mounted light fitting > Version with 2 lamps: 18 W and 36 W > Central locking > All-pole disconnection via N/C switch when opening light fitting or
Pneumatic Control/Feedback
897 /Feedback Type 897 can be combined with... Compact design Integrated pilot valve with manual override Internal control air routing Bright LED position indicator Automatic end position adjustment Type
Position Switches Series 8070
www.stahl.de > Enclosures of type of protection "Increased safety > Dimensions and characteristic values according to EN 50041 > Replaceable contact in flameproof enclosure > Positive opening contacts
97105 NAMUR, 3/2, 5/2 & 5/3 Indirect electromagnetic actuated spool valves
970 NAMUR, /, / & / > > Port size: / or / ISO G/NPT > > Main application: single and double operated actuators > > TÜV-approval based on type examination DIN EN, DIN 9 and IEC 08 > > Valves for safety
RT2Y Compact temperature switch intrinsic safety
ompact temperature switch intrinsic safety Main Features Excellent repeatability Fix dead band for control and alarm Resistant to accidental overtemperature Intrinsic safety Hazardous area 0, 1, 2 pplications
2.2. Ex-Linear LED light fittings. ellk/m 92 LED 400/800 / ellk/m 92 LED 400/800 V-CG-S / NE / NIB-HT / NIB-CSA (Zone 1, 2, 21, 22)
. Ex-Linear LED light fittings ellk/m 9 LED 400/800 / ellk/m 9 LED 400/800 V-CG-S / NE / NIB-HT / NIB-CSA (Zone 1,, 1, ) The efficient solution for your explosion-protected lighting concept The explosion-protected
Material Seat seal. N/en
0 / poppet valves electromagnetic actuated, directly controlled G /, / NPT or flanged with NAMUR interface TÜV-approval based on IEC 6 8 Valves for safety systems up to SIL Standard NAMUR type - redundancy:
ANACONDA MULTIFLEX CONDUIT TYPE UI
ANACONDA MULTIFLEX CONDUIT TYPE UI Very robust, extremely flexible and corrosion resistant Multifl ex type UI is the stainless steel version of type UIG. Extremely fl exible and robust, this fully interlocked,
Inductive sensor NI3-EG08K-Y1-H1341
ATEX category II 1 G, Ex zone 0 ATEX category II 1 D, Ex zone 20 SIL2 as per IEC 61508 Threaded barrel, M8 x 1 Stainless steel, 1.4427 SO DC 2-wire, nom. 8.2 VDC Output acc. to DIN EN 60947-5-6 (NA- MUR)
Inductive sensor BI1.5-EG08-Y1-H1341
ATEX category II 1 G, Ex zone 0 ATEX category II 1 D, Ex zone 20 SIL2 (Low Demand Mode) acc. to IEC 61508, PL c acc. to ISO 13849-1 at HFT0 SIL3 (All Demand Mode) acc. to IEC 61508, PL e acc. to ISO 13849-1
= 1.0 meter. 50 = 5.0 meter. 90 = 9.0 meter. 95 = 9.5 in. NOTE: Highlighted lengths are stocked for shorter lead times
DP1007 Series Intrinsically Safe, PRO 11 mm, 1/2 20 Case Thread, Eddy Current/s with Jacketed Cable PRO DP1007 series proximity probes measure shaft vibration and displacement on Class I Zone 0 A Ga 11
Redapt certified accessories for hazardous areas. Solutions for hazardous area cable terminations
Redapt certified accessories for hazardous areas Solutions for hazardous area cable terminations Energizing a world that demands more. Discover today s Eaton. Powering business worldwide As a global power
Velomitor * Piezo-velocity Sensor
Velomitor * Piezo-velocity Sensor Bently Nevada* Asset Condition Monitoring Description Velomitor * Piezo-velocity Sensors measure absolute (relative to free space) bearing housing, casing, or structural
Probe Holder for PR6422 and PR6423
Probe Holder for PR6422 and PR6423 The probe holder permits mounting of eddy current sensors of type PR6422 and PR6423 at machines so that they can be adjusted form outside. The sensors can be changed
Active face 57,5. Series Comment Version Order no. / item. Installation material 8-groove Bosch Installation material for CES-A-BSP
Actuator CES-A-BSP Optimized for aluminum profile mounting Actuator CES-A-BSP 18,1 Ø 5,2 10 6 5 R2 57,5 97,1 CES-A-BSP Please order installation material separately 104970 CES-A-BSP-104970 For Bosch profiles
FB-6SP and FB-12SP. Block device couplers. Data sheet 3177_en_A. 2 Features. 1 Description
Block device couplers Data sheet 3177_en_A 1 Description PHOENX CONTACT 2015-01-20 2 Features The and block couplers provide an interface between the fieldbus trunk cable and field devices on Foundation
Ethernet CPU Module & Power Module for Zone 1 / Div. 1 Series 9441/12 and 9444/12
www.stahl.de > Fieldbus connection Industrial Ethernet PROFINET, Modbus TCP or EtherNet/IP with 100 MBit/s > Redundant Ethernet connection (Modbus TCP) is possible > Explosion protected, optical inherently
ECE Cert.fic te of Con ormity
ECE Cert.fic te of Con ormity INTERNATIONAL ELECTROTECHNICAL COMMISSION IEC Certification Scheme for Explosive Atmospheres for rules and details of the IECEx Scheme visit www iecex.com Certificate No.:
General Specifications
General Specifications Model MLX Loop Powered Process Indicator GS 60A02S01-01E-A The Model MLX Loop-Powered Process Indicator receives DC current signals from electronic transmitters and indicates process
21000,24701 Proximity Probe Housing Assemblies Bently Nevada Asset Condition Monitoring
21000,24701 Proximity Probe Housing Assemblies Bently Nevada Asset Condition Monitoring Description Proximity Probe Housing Assemblies Bently Nevada offers two all-metal Proximity Probe Housing Assemblies
Modular pressure transmitters for harsh environments DST P500, DST P507 and DST P550
Data sheet Modular pressure transmitters for harsh environments DST P500, DST P507 and DST P550 The P500 / P507 / P550 utilizes the thin film strain gauge sensing technology, incorporating an hermetically
ControlNet-to-DeviceNet Linking Device
Installation Instructions ControlNet-to-DeviceNet Linking Device Catalog Number 1788-CN2DN Topic Page Important User Information 2 About the CN2DN Linking Device 7 Parts List 8 Required System Components
Technical Informa on Codes Packing Informa on Thread Type
GLANS PLASTIC CABLE GLANS Technical etails Body PA 6 (Polyamide 6) Cap PA 6 (Polyamide 6) Seal CR (Chloroprene Rubber) Flammability V2 (According to UL 94) Protec on Class IP 68-5 Bar Opera ng Permanent