MODEL NUMBERS OUTPUT SPECIFICATIONS 1 Zero Voltage and Random Turn-On Switching Panel Mount 600V Transient Capability Internal Snubber 110 & 125A Mode
|
|
|
- Marcia Young
- 5 years ago
- Views:
Transcription
1
2
3
4
5
6 MODEL NUMBERS OUTPUT SPECIFICATIONS 1 Zero Voltage and Random Turn-On Switching Panel Mount 600V Transient Capability Internal Snubber 110 & 125A Models Available Integrated Overvoltage Protection by Automatic Self Turn-On (Suffix P) Series Amp 120/240 Vac - AC OUTPUT Featuring state-of-the-art Surface Mount Technology, these SPST-NO relays deliver proven reliability in the most demanding applications. Output consists of an SCR AC switch and is available in zero-cross, random turnon (phase controllable) and normally closed (Form B) versions with either AC or DC input (coil) control. Manufactured in Crydom s ISO 9001 Certified facility for optimum product performance and reliability. AC CONTROL A1210 A1225 A1240 A2410 A2425 A2450 A2475 A2490 DC CONTROL D1210 D1225 D1240 D2410 D2425 D2450 D2475 D2490 Operating Voltage (47-63 Hz) [Vrms] Max. Load Current 3 [Arms] Min. Load Current, [marms] Transient Overvoltage [Vpk] Max. Surge Current, (16.6ms) [Apk] Max. On-State Voltage Rated Current [Vpk] Thermal Resistance Junction to Case (R qjc ) [ C/W] Maximum I 2 t for Fusing, (8.3 msec.) [A 2 sec] Max. Off-State Leakage Rated Voltage [marms] Min. Off-State Max. Rated Voltage [V/µsec] Max. Turn-On Time 4 1/2 Cycle (DC Control), 10.0 msec (AC Control) Max. Turn-Off Time 1/2 Cycle (DC Control), 40.0 msec(ac Control) Power Factor (Min.) with Max. Load INPUT SPECIFICATIONS 1 DC CONTROL AC CONTROL 24V AC/DC CONTROL (E SUFFIX) Control Voltage Range 3-32 Vdc Vrms (60Hz) Vrms/Vdc Max. Reverse Voltage -32 Vdc Max. Turn-On Voltage 3.0 Vdc 90 Vrms 18 Vrms/Vdc Min. Turn-Off Voltage 1.0 Vdc 10 Vrms 4.0 Vrms/Vdc Nominal Input Impedance 1500 Ohms 60K Ohms 9.0K Ohms Typical Input Current 5 Vdc, 28Vdc 120 Vrms, 240 Vrms 24 V GENERAL NOTES 1 All parameters at 25 C unless otherwise specified. 2 Off-State dv/dt test method per EIA/NARM standard RS-443, paragraph Heat sinking required, for derating curves see page 3. 4 Turn-on time for random turn-on versions is 0.02 msec (DC Control Models) CRYDOM CORP, Specifications subject to change without notice. SERIES1 Rev PAGE 1 OF 3
7 Series Amp 120/240 Vac - AC OUTPUT AVAILABLE OPTIONS -B Normally Closed (Form B) Example: D2450-B, A2450-B E F G P 4D 24V AC/DC Input Example: A2450E Faston Terminals (Up to 50A Models) Example: D1225F Input Status LED. Example: D2450G Note: Control Voltage Range Vdc for DC Control Models. Internal Overvoltage Protection. Relay Will Self Trigger Between Vpk. Not Suitable For Capacitive Loads. Not Available with -B Option Example: D2425P 400 Hz Operation Amp Models Only Zero Cross Switching Only Example: 4D Random Turn-On (AC & DC Control) Phase Controllable (DC Control) Example: D H Heat Transfer Pad (Attached) Example: D2450H Ordering System: Combination of the suffixes should be made in the following order: EFPG-10. Example: A2450EFPG-10 GENERAL SPECIFICATIONS Dielectric Strength 50/60Hz Input/Output/Base 4000 Vrms Insulation Resistance 500 Vdc 10 9 Ohm Max. Capacitance Input/Output 8 pf Ambient Operating Temperature Range -40 to 80 C Ambient Storage Temperature Range -40 to 125 C MECHANICAL SPECIFICATIONS Weight: (typical) 3.0 oz. (86.5g) Encapsulation: Thermally Conductive Epoxy Terminals: Screws and Saddle Clamps Furnished, Unmounted Screw Torque Requirements: 6-32 Screws - 10 in. lbs., 8-32 and Screws - 20in. lbs. (Screws dry without grease.) Fastons: Single pair (up to 25A) Double pair* (up to 50A). *Caution: User must connect to both pairs MOUNTING HOLE/SLOT 0.17 (4.3) DIA (47.5) BASE PLATE.125 (3.2) MOUNTING HOLE/SLOT 0.17 (4.3) DIA (47.5) BASE PLATE.125 (3.2) Crydom Heat Sinks offer excellent thermal management and are perfectly matched to the load current ratings of Crydom panel mount relays. Request Crydom s Heat Sink specification sheet for all the details (27.9).45 (11.4) OUTPUT INPUT 1.10 (27.9).45 (11.4) OUTPUT INPUT 1.00 (25.4) 1.80 (45.7) (58.4) 1.70 (43.2) 1.00 (25.4) 6-32 TERMINAL (2 PLACES) 1.80 (45.7) 2.30 (58.4) 1.70 (43.2) FASTON TERMINAL.187 X.032 (2 PLCS.) All dimensions are in inches (millimeters) 8-32 TERMINAL (2 PLACES ).78 (19.8).90 (22.9) FASTON TERMINAL.250 X.032 (2 PLCS.).87 REF. (22.2).78 (19.8).90 (22.9) APPROVALS UL E CSA LR81689 VDE UG (Not Applicable: -B and 4D) 2007 CRYDOM CORP, Specifications subject to change without notice. SERIES1 Rev PAGE 2 OF 3
SERIES VAC PANEL MOUNT
SERIES VAC PANEL MOUNT Features Ratings from A to A @ VAC SCR output for heavy industrial loads Zero voltage or instantaneous turn-on outputs UL/CSA/VDE Approved, CE Compliant to EN69- Improved SEMS screw
Zelio Relay - Solid State Relays
Selection guide Applications Panel mounted PF--Q Contact type N/O SPST contact Control voltage ranges a V c SCR output : V Mosfet output :. V Operating voltages a V, V, V c V Type of switching a Zero voltage
PMP SERIES PROPORTIONAL CONTROL SOLID STATE RELAYS Introduction
PMP SERIES PROPORTIONAL CONTROL SOLID STATE RELAYS Introduction The PMP Series of micro-controller based Single-Phase Proportional Control SSRs are designed to offer precise control of the power delivered
Introduction. Features. Applications DR45 SERIES AC SINGLE PHASE OUTPUT DIN RAIL MOUNT SSRS PRODUCT SELECTION
DR45 SERIES AC SINGLE PHASE OUTPUT DIN RAIL MOUNT SSRS Introduction The DR45 is a powerful and compact solid state relay in a DIN rail 45mm wide package with an output rating up to 6 Amps @ 4 C offering
Series SD. Series Switch Type 2 Feature 3 Line Voltage 1 Output Current - Amps. Dual Output to 50A 600 Vac DC Control Solid-State Relay
Dual Output to 5A Vac FEATURES/BENEFITS The Series SD dual-phase relays are designed for all types of loads. The design incorporates two relays in a single package. The relays utilize optical isolation
Model Number Structure
Solid State Relays CSM DS_E_3_1 Compact, Low-cost, SSR Switching 5 to 20 A Wide load voltage range: 75 to 264 VAC. Both 100-V and 200-V loads can be handled with the same model. Dedicated, compact aluminum
1-DC SERIES PANEL MOUNT
1DC SERIES PANEL MOUNT Features Ratings from 6 A to 1 A @ 1 DC Mosfet Output UL Approved, CE Compliant to EN6951 Improved SEMS screw and washer Redesigned housing with antirotation barriers DC control
Solid State Relays Industrial, 1-Phase ZS (IO) w. LED Types RAM1A, RAM1B
Solid State Relays Industrial, 1-Phase ZS (IO) w. LED Types RAM1A, RAM1B Zero switching (RAM1A) or instant-on switching (RAM1B) AC Solid State Relay Direct copper bonding (DCB) technology LED indication
Series LS. 30A to 600 Vac SIP Package DC control LS 24 D 16 C. Figure 1 LS relays; dimensions in inches (mm) (See Figure 12 for LS with HS1)
3A to 6 Vac SIP Package DC control Part Number LSD16C LSD1C LS6DC LSD7C LS6D7C LS6D3C Description 16A, Vac 1A, Vac A, 6 Vac 7A, Vac 7A, 6 Vac 3A, 6 Vac Part Number Explanation LS D 16 C NOTES 1) Line Voltage
G3NE. Ordering Information. Solid State Relay. Compact, Low-cost, SSR Switching 5to20A J ACCESSORIES (ORDER SEPARATELY) Solid State Relay G3NE
Solid State Relay G3NE Compact, Low-cost, SSR Switching 5to20A D Wide load voltage range: 75 to 264 VAC. D Dedicated, compact aluminum PCB and power elements used. D Built-in varistor effectively absorbs
Relays & Sockets. RSC Series. RSC Series Solid State Relays. Part Number Selection Specifications
RSC Series RSC Series Solid State Relays Key features of the RSC series include: Slim design allows for DIN rail or panel mounting Built-in heat sink maximizes current output capability Epoxy-free design
MOS FET Relay. Ordering Information. Application Examples G3VM- XN(F)/4N(F)
MOS FET Relay G3VM- XN(F)/4N(F) SSR for Switching Analog Signals, with an I/O Dielectric Strength of 2.5 kvac Using Optical Isolation Switches minute analog signals. Linear voltage and current characteristics.
NEW Series SSH Output to 75A, 510 Vac with Diagnostics High Industrial Performance (HIPpak) Solid-State Relays
FEATURES/BENEFITS Zero-cross models with system diagnostics Very low zero-cross turn-on voltage Input and output protection and control LED standard IP20 protection by flaps on terminals With double removable
SSR SERIES MODULES AND BACKPLANES
USER GUIDE SSR SERIES MODULES AND BACKPLANES Introduction This guide describes the mechanical and electrical aspects of the solid state relay (SSR) Series modules and backplanes. It also describes how
Bulletin 700-SH Solid-State Relays. Overview/Product Selection. Bulletin 700-SH. Product Selection
Overview/Product Selection Bulletin 700-SH 40 A (resistive) Max. Continuous (Output) Current with Heat Sink 264V AC or 528V AC Max. Voltage Range Options 5 24V DC, 100 120V AC, 200 240V AC Control Input
G3NE. Model Number Structure. Solid State Relays. Model Number Legend. Compact, Low-cost, SSR Switching 5 to 20 A
Solid State Relays CSM DS_E_4_1 Compact, Low-cost, SSR Switching 5 to 20 A Wide load voltage range: 75 to 264 VAC. Both 100-V and 200-V loads can be handled with the same model. Dedicated, compact aluminum
Solid State Relay KSI240 Series 1-Phase AC Output
Solid State Relay KSI24 1-Phase AC Output Zero switching or instant-on Ratings from 1A to 1A @ 48-28VAC SCR output for heavy industrial loads AC or DC input DBC substrate for superior thermal performance
Switching Power Supply S8E1. Ordering Information. Compact and Economical Switching Power Supply
Switching Power Supply Compact and Economical Switching Power Supply Models range from 10 to 50 W Open-frame and covered types Wide range of output voltage: 5-, 12-, 15- and 24-V models UL, CSA approved
Model Number Structure
Solid State Relays with Failure Detection Function G3PC CSM_G3PC_DS_E_1_1 Refer to Safety Precautions for All Solid State Relays. Detects failures in SSR used for heater temperature control and simultaneously
Model Number Structure
Solid State Relays with Failure Detection Function G3PC Detects failures in SSR used for heater temperature control and simultaneously outputs alarm signal. This SSR supports the safe design of heater
G3PC. Model Number Structure. Solid State Relays with Failure Detection Function. Model Number Legend
Solid State Relays with Failure Detection Function G3PC Refer to Warranty and Application Considerations (page 1), Safety Precautions (page 4), and Technical and Safety Information (page 6). Detects failures
PS2601 AC Power Switch
AC Power Switch Parameter Rating Units AC Operating Voltage 26 V rms Load Current 1 A rms On-State Voltage Drop (I L =1A rms 1.2 V rms Features Load Current up to 1A rms (3A rms with heat sink Blocking
(Applicable output load) to 264 (see note 2) (see note 1) (2Aat75to264VAC) G3R-202SLN-US PCB Yes 2 A at 100 to 120 VDC. (2 A at 75 to 132 VDC)
Solid-state Relay Compact SSRs Ideal for Built-in Applications Vertical, compact SSRs with an operation indicator offered in versatile variations. Can be mounted side by side with an electromagnetic relay
AZ420 MINIATURE GENERAL PURPOSE RELAY
MINIATURE GENERAL PURPOSE RELAY FEATURES Rugged construction for high reliability Life expectancy greater than 100 million operations DC coils to 11 V Power consumption as low as 2 mw per pole available
SM320A~SM3200A SCHOTTKY DIODE REVERSE VOLTAGE 20 TO 200V FORWARD CURRENT 3.0A
320A~3200A DESCRIPTION The 320A~3200A are available in A Package. ORDERING INFORMATION Package Type Part Number 320A 340A 360A 380A A 3100A 3120A 3150A 3200A Note 5,000pcs/Reel AiT provides all RoHS Compliant
EZ-ZONE ST. EZ-ZONE ST Integrated Control Loop Makes Solving the Thermal Requirements of Your System Easy SPECIFICATION SHEET
EZ-ZONE ST Integrated Control Loop Makes Solving the Thermal Requirements of Your System Easy EZ-ZONE ST 75 ampere configuration SPECIFICATION SHEET EZ-ZONE ST 40 ampere full configuration with mechanical
PR - PCB relay. 42 catalog 2002 e / the PR-PCB relay. By using best materials and because of the simple construction the highest failsecurity
PR - PCB relay the PR-PCB relay PCB-Relay from the PR family are small relays. The version has forced guided contacts, 2 normally open contacts, 2 normally closed contacts. In the industrial electronic
Input/output relays for interface between the CPU and the load
Input/output relays for interface between the CPU and the load -RELAYS RoHS compliant FEATURES. Input and output s for interfacing between CPU and external input devices or loads : AC input (yellow) :
The Complete System Solution!
dvantages of the Class 6 Solid State Relay The Complete System Solution! Optional Heat Sink (SSR-HS-1) Section 3 p. Optional Thermal Pad (SSR-TP-1) Section 3 p.21 We at Magnecraft strive to be your one-stop-shop
Switching Power Supply
Switching Power Supply Miniature, Thin Power Supply to Be Built into Equipment Half the size of OMRON s conventional power supply. PCB-type and connector-type models available. UL, CSA approved. Conforming
DC-DC CONVERTERS SINGLE OUTPUT, 60 WATTS EXTREMELY WIDE 12:1 INPUT VOLTAGE RANGE: 9-75VDC, VDC RAILWAY APPLICATIONS
DC-DC CONVERTERS SINGLE OUTPUT, 60 WATTS EXTREMELY WIDE 12:1 INPUT VOLTAGE RANGE: 9-75VDC, 14-160VDC RAILWAY APPLICATIONS FEATURES 60 Watt Output Power Extremely Wide 12:1 Input range: 9-75, 14-160 Output
PGR-2601 MANUAL DC GROUND-FAULT RELAY
POWR-GARD Ungrounded DC System PGR-2601 SERIES DC Ground-Fault Relay PGR-2601 MANUAL DC GROUND-FAULT RELAY AUGUST 31, 2009 REVISION 1 POWR-GARD DC GROUND-FAULT RELAY PWR TRIP 5 4 3 2 6 - BUS 8 10 15 20
CENTIGRID SURFACE MOUNT COMMERCIAL RELAYS DPDT
Series S114 DPDT Non-Latching Commercial Electromechanical Relay CENTIGRID SURFACE MOUNT COMMERCIAL RELAYS DPDT SERIES S114 S114D S114DD DESCRIPTION RELAY TYPE DPDT basic relay DPDT relay with internal
RUC industrial relays of small dimensions
RUC industrial relays of small dimensions 135 with adaptor (V) Contact data Number and type of contacts Contact material Rated / max. switching voltage Min. switching voltage Rated load Min. switching
AA20B 20 Watts. AA20BSeries
AA20B 20 Watts AA20BSeries Total Power 20 Watts Input Voltages 12V, 24V or 4V # of Outputs Single, Dual SPECIAL FEATURES Six-sided shielding Wide 2:1 / 4:1 input range Telecom models (-04L models) feature
EZ-ZONE ST. EZ-ZONE ST Integrated Control Loop Makes Solving the Thermal Requirements of Your System Easy
EZ-ZONE ST 75 ampere configuration 40 ampere full configuration with mechanical contactor configuration with only the controller and SSR EZ-ZONE ST Integrated Control Loop Makes Solving the Thermal Requirements
The PCI Series. Precise power control for complex SCR applications. Phase Angle Fired SCR Power Controls AMPS VAC
The PCI Series Phase Angle Fired SCR Power Controls 25-1200 AMPS 120-600 VAC Precise power control for complex SCR applications. ROBICON 1996 Distributed Worldwide by www.mcgoff-bethune.com Applications
CENTIGRID SURFACE MOUNT COMMERCIAL RELAYS SENSITIVE DPDT
Series S134 DPDT Non-Latching Commercial Electromechanical Relay CENTIGRID SURFACE MOUNT COMMERCIAL RELAYS SENSITIVE DPDT SERIES S134 S134D S134DD RELAY TYPE DPDT basic relay DPDT relay with internal diode
209/219/229 Multi-Pole Circuit Protectors 202 branch circuit applications such as EDP, air conditioners, panel boards
The 29, E-Frame circuit breaker combines power switching with accurate, reliable circuit protection 29/29/229 Magnetic Circuit Protectors 99 in a compact single or multipole 249 Power Selector Breaker
PM1206STR. AC Power Switch INTEGRATED CIRCUITS DIVISION
AC Power Switch Parameter Rating Units AC Operating Voltage 26 V rms Load Current 5 ma rms On-State Voltage Drop (I L =5mA rms ) 1.4 V rms Features Load Current up to.5a rms Blocking Voltages up to 6V
Voltage Current Front-mounting bracket
Switching Power Supply S8PS Compact DIN-Rail Mounting Industrial Power Supplies with Capacities Up to 600 W Models range from 0 W to 600 W. Universal input: voltage range 0 to 240 VAC. Power Factor Correction
Self-Powered Counters H7EC
Self-Powered Counters Subminiature Count Totalizers Require No External Power Supply Subminiature 8 x mm (1.89 x.9 in) Improved noise immunity Screw terminal and wire-wrap types available AC, DC, and no-voltage
S8VE (60/90/120/180/240-W Models)
Switch Mode Power Supply S8VE (60/90/120/180/240-W Models) CSM_S8VE_DS_E_1_1 60/90/120/180/240-W Models Improved Versions of Standard-type Power Supplies without Indication Monitor. Safety standards: UL508/60950-1,
Load current 10 to 25 A Small Tab Terminal SSR
UL (9-1) reinforced insulation compliant Load current to A Small Tab Terminal SSR RELAYS ORDERING INFORMATION Output type 1: A, 7 to 4 Vrms : A, 7 to 4 Vrms 4: A, 7 to 4 Vrms Slim heat sink combined type
must Operate Voltage (V)
force-guided relays g7sa G7SA compact, Slim relays conforming to en Standards Relays with forcibly guided contacts (EN50205 Class A, certifi ed by VDE) Supports the CE marking of machinery (Machinery Directive)
Switching Power Supply S82J. Ordering Information. Open-Frame, Covered-Frame, or Enclosed-Frame Type with Capacity Up to 600 W
Switching Power Supply Open-Frame, Covered-Frame, or Enclosed-Frame Type with Capacity Up to 600 W Models range from 10 to 600 W UL 508 approval on 100-W 150-W, 300-W, and 600-W models Wide range of output
Load current 10 to 25A Small Tab Terminal SSR
UL (9-1) reinforced insulation compliant Load current 1 to 2A Small Tab Terminal SSR AQ-J RELAYS Slim heat sink combined type RoHS compliant ORDERING INFORMATION Output type 1: 1A, 7V to 24V AC 2: A, 7V
TWDLMDA20DTK extendable PLC base Twido 24 V - 12 I 24 V DC - 8 O solid state
Characteristics extendable PLC base Twido 24 V - 12 I 24 V DC - 8 O solid state Main Range of product Product or component type Discrete I/O number 20 Discrete input number 12 Discrete input logic Discrete
Compact high capacity, (25A max) Slim heat sink combined type added
Compact high capacity, (A max) Slim heat sink combined type added UL (9-1) reinforced insulation compliant RELAYS New Slim heat sink combined type Compliance with RoHS Directive FEATURES 1. Compact Size
TVZ: THERMO-FUSE VARISTORS
WORLD PRODUCTS INC. ELECTRONIC COMPONENT SOLUTIONS TVZ: THERMO-FUSE VARISTORS Protection Products Catalog 121 122 Protection Products Catalog Table Of Contents Description 123 Features 123 Part Number
Combine Relays and P7TF Block Bases to match your application requirements. Use the table below to configure Relay Blocks.
9 Relay I/O Block Reduces Wiring within the Control Panel and Reduces Installation Time 1 Compact 16-pt models: 182 W l 85 D l 68 H mm; 8-pt block width is 102 mm 1 Can be connected to the PLC with a connecting
TEP 100WIR Series, 100 Watt
TEP 100WIR Series, 100 Watt Features Compact metal package Ultra wide 4:1 input voltage ranges 8.5 36, 16.5 75, 43 160 VDC EN 50155 approval for railway applications Very high efficiency up to 92% No minimum
Switching Power Supply
Switching Power Supply Highly Reliable and Full-functioned 1-year Life Expectancy, 12, 1, or 24 V output voltages, and 30, 60, 0, or 10 W power ratings. 8 to 132 VAC or 170 to 264 VAC switchable input
Features. Samples. Units Continous: Steady State Applied Voltage: DC Voltage Range (VM(DC)) 150 to 970 V AC Voltage Range (V M(AC)RMS
S 34S Varistor Series RoHS Description The Littelfuse S 34S thermally protected varistor is a self-protected device. It consists of a 34mm square varistor with an integral thermal designed to open in the
Functional configuration Rated input voltage Power ratings Output voltage Output current Part number Non-PFC
Switching Power Supply DIN-Rail Mount Power Supply With Capacity Up to 240 W for General or Industrial Applications Wide power range: 15 to 240 W 15 W and PFC Models with Universal voltage of 100 to 230
3 Pole Contactors with AC operating coils
1 3 Pole Contactors with AC operating coils Characteristics General Characteristics Switching Current 9A ~ Rated insulation voltage (Ui) (Conforming to IEC 158-1) V 750 IEC 60947-4 V 1000 Conforming to
Model Number Structure
ASH & ALAIN INDIA PVT LTD S-100, F.I.E.E., Okhla Industrial Area, Phase-ii, New Delhi-110020(India) Tel : 011-43797575 Fax : 011-43797574 E-mail : sales@ashalain.com Solid State Relays G3 @-VD CSM_G3F_G3FD_DS_E_2_1
Compact high capacity, (25A max) Slim heat sink combined type added
Compact high capacity, (2A max) Slim heat sink combined type added UL (9-1) reinforced insulation compliant AQ-J AQ-J RELAYS New Slim heat sink combined type Compliance with RoHS Directive FEATURES 1.
TEP 75WI Series, 75 Watt
TEP 75WI Series, 75 Watt Features UL 60950-1 Rugged, compact metal case Screw terminal adaptor available for easy connection EN 50155 approval for railway applications Optional DIN-rail mounting kit Ultra
Silicon 5 Watt Zener Diodes
Compliant Silicon 5 Watt Zener Diodes DESCRIPTION The 1N5334Be3 through IN5388Be3 JEDEC registered series of axial-leaded 5.0 watt Zeners provides a voltage selection of 3.6 V to 200 V with different tolerances
TWDLMDA20DRT extendable PLC base Twido 24 V - 12 I 24 V DC - 8 O solid state and relay
Characteristics extendable PLC base Twido 24 V - 12 I 24 V DC - 8 O solid state and relay Commercial status Discontinued: 31 December 2016 End-of-service: 31 December 2018 has not been replaced. Please
Switch Mode Power Supply S8VT 120/240/480/960 W Models
Switch Mode Power Supply 120/240/480/960 W Models Natural Cooling Three-phase Power Supply Range from 5A up to 40A with Output Voltage of 24VDC 3 phase 400 to 500 VAC 5, 10, 20 and 40 A; 24 VDC output
KEPCO SINGLE OUTPUT, 1U SIZE, 100 WATT HOT SWAP PLUG-IN POWER SUPPLIES TABLE 1. OUTPUT RATINGS AND SPECIFICATIONS, HSF-1UR 100W SERIES
INSTRUCTION MANUAL KEPCO An ISO 9001 Company. KEPCO SINGLE OUTPUT, 1U SIZE, 100 WATT HOT SWAP PLUG-IN POWER SUPPLIES HSF-1UR 100W SERIES I INTRODUCTION The Kepco HSF-1UR 100 Watt Series hot swappable,
MVAD040 Series 40W 2" x 4" AC-DC Power Supply Converter
www.murata-ps.com MVAD040 Series DESCRIPTION The MVAD040 series switching power supplies utilize advanced component and circuit technologies to deliver high effi ciency. Designed for Medical, Telecom,
APL/UPL, 205/295 Series Magnetic Circuit Protectors
APL/UPL, 205/295 APL/UPL, 205/295 Series Magnetic Circuit Protectors Introduction 68 Single & Multi-Pole 69 Barriers 7 Configurations 72 Operating Characteristics 74 Delay Curves 75 Specifications 80 Decision
Transient Voltage Suppression Diodes Axial Leaded 1500W TVS Diode1.5KE Series
The 1.5KE Series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Dimension Dim Millimeters Inches Min
Ordering Information. Three-phase Input Switch Mode Power Supply S8VT S8VT. Model Number Legend
Three-phase Input Switch Mode Power Supply S8VT DIN-rail mounting, Power Supply with a range of 5 A to 40 A output current 3 phase 400 to 500 VAC 5, 10, 20 and 40 A; 24 VDC output Higher stability, lower
PXC05-Dual Output Series: DC/DC Converter Module 9 to 75 Vdc input, 3.3 to 15 Vdc Dual Outputs, 5W
PXC05-Dual Output Series: DC/DC Converter Module 9 to 75 input, 3.3 to 15 Dual Outputs, 5W UL UL60950-1 TUV EN60950-1 CB IEC60950-1 CE MARK Features Low profile: 1.25 x 0.80 x 0.40 inches (32.0 x 20.3
RE7RB13MW adjustable off-delay timing relay s V AC DC - 2OC
Characteristics adjustable off-delay timing relay - 0.05..1 s - 240 V AC DC - 2OC Main Range of product Product or component type Contacts type and composition Component name Time delay type Time delay
Datasheet Stock No: RS Pro
Datasheet Stock No: 9012718 RS Pro Product Details: Our RS Pro metal oxide varistors have been designed to meet the abnormal overvoltage requirements outlined in Section 39.4 of the UL1449 standard (4
TWDLMDA20DRT extendable PLC base Twido 24 V - 12 I 24 V DC - 8 O solid state and relay
Characteristics extendable PLC base Twido 24 V - 12 I 24 V DC - 8 O solid state and relay Product availability : Stock - Normally stocked in distribution facility Price* : 662.00 USD Main Range of product
TWDLMDA40DUK extendable PLC base Twido 24 V - 24 I 24 V DC - 16 O solid state
Characteristics extendable PLC base Twido 24 V - 24 I 24 V DC - 16 O solid state Complementary Input voltage limits Main Commercial Status Range of product Product or component type Discrete I/O number
Solving your relay requirements since 1922
Expected Life @ 25 C: 100,000 operations minimum at rated loads Solving your relay requirements since 1922 C Series TDR Solid state analog circuitry Delay on operate timing mode Compact size Relay output
SNAP Digital Output Modules. SNAP Digital Output Modules. Features. Description
Features Four channels per module Convenient pluggable wiring terminals; accepts up to 14 AWG wire Powered by a single 5-volt supply Channel-specific LEDs Operating temperature: 0 to 70 C UL and CE approved
TeSys IEC Contactors and Overload Relays
TeSys IEC Contactors and Overload Relays Making High-Fault Short-Circuit Current Ratings Simple Schneider Electric is an industry leader in IEC contactors and overload relays, and is recognized as the
Bulletin 700-HL 2-Pole Terminal Block Relay
Bulletin 700-HL 2-Pole Terminal Block Relay Bulletin 700-HL 2-Pole "Terminal Block Relay" Relay and socket assembled interface modules for high density interposing or isolation applications Screw terminal
RE7YA12BU time delay relay for star-delta starter s - 24 V AC DC - 2OC
Characteristics time delay relay for star-delta starter - 0.05..1 s - 24 V AC DC - 2OC Main Range of product Product or component type Contacts type and composition Component name Time delay type Time
RM4JA01F current measurement relay RM4-J - range ma V AC
Characteristics current measurement relay RM4-J - range 3..1000 ma - 110..130 V AC Main Range of product Product or component type Relay type Relay name Relay monitored parameters Power consumption in
POWERBOX Industrial Line PMR20W Series 20W 4:1 Single and Dual Output High Performance DC/DC Converter
Features 2250VDC input to output isolation Standard 2.00 x 1.00 x 0.40 inch Six-sided continuous shield UL60950-1, EN60950-1, & IEC60950-1 safety approvals Compliance to EN50155 and en45545-2 railway standard
TWDLMDA20DRT extendable PLC base Twido 24 V - 12 I 24 V DC - 8 O solid state and relay
Product datasheet Characteristics TWDLMDA20DRT extendable PLC base Twido 24 V - 12 I 24 V DC - 8 O solid state and relay Complementary Input voltage limits Main Range of product Product or component type
DRMS SERIES DIN RAIL MOUNT HYBRID MOTOR STARTERS
DRMS SERIES DIN RAIL MOUNT HYBRID MOTOR STARTERS DRMS Series Hybrid Motor Starters are intelligent and convenient solutions for controlling 3-phase asynchronous motors. These compact devices can provide
P r o t e c t o r s C h a p t e r 227
Protectors Chapter 7 227 Protectors Contents PANELS Small Pair Count - 110ANA1 229 489 A&B Models 230 UNITS 4B1-EW & 4C3S-75 Protector Units 231 Category 5 OSP Protector 233 228 Small Pair Count - 110ANA1
HIGH PERFORMANCE MINIATURE SWITCHES WITH WIDE RANGE
HIGH PERFORMANCE MINIATURE SWITCHES WITH WIDE RANGE NV (AH7) SWITCHES FEATURES Extra long-life spring mechanism More than 10 7 mechanical operations, 10 electrical High contact rating of 1 Amps with an
TEP160-WIRCM SERIES 160 Watt High Density Brick DC-DC Converter Measures: 2.40 x 2.28 x 0.50
Features Compact metal package Ultra wide 4:1 input voltage ranges 8.5 36, 16.5 75, 43 160 VDC EN 50155 approval for railway applications Very high efficiency up to 91% No minimum load Soft start Ajustable
RE9RA21MW7 off-delay timing relay s V AC -
Characteristics off-delay timing relay - 3..300 s - 240 V AC - solid state Main Range of product Product or component type Discrete output type Component name Time delay type Time delay range [Us] rated
(75 to 264 VAC) 12 VDC 24 VDC No 5 VDC G3MC-202PL 12 VDC 24 VDC
Solid State Relay G3MC Compact, Thin-profile, Low-cost SSR with Reinforced Insulation Small bottom surface area (approx. 80% of the conventional G3MB s), ideal for close PCB mounting. DC input and AC output
Transistor drive 2c/4c 5A slim power relays
Transistor drive c/c 5A slim power relays NC RELAYS NC Flat type () NC (Plug-in type) RoHS compliant NC Flat type () NC () FEATURES 1. Compact, slim design Use of high-performance flat electromagnetic
MCC 2EZ5.1D5 THRU 2EZ75D5. Features Glass Passivation Junction. 2 W Glass Passivated Junction Silicon Zener Diode 5.
omponents 76 Marilla Street Chatsworth!"# $%!"# EZ.D THRU EZ7D Features Glass Passivation Junction Lead Free Finish/RoHS Compliant (Note C) ("P"Suffix designates Compliant. See ordering information) Excellent
RE8YG31BUTQ industrial timing relay s - type Qc - 24 V AC/DC, V AC - 1C/O
Characteristics industrial timing relay - 0.3..30 s - type Qc - 24 V AC/DC, 110..240 V AC - 1C/O Main Range of product Product or component type Component name Time delay type Time delay range Sep 23,
1 Form A 8A/16A, Small Polarized Power Relays (latching type)
8A/16A, Small Polarized Power Relays (latching type) DW RELAYS (ADW1) New Low profile type (Inrush type) FEATURES 1. Low profile type available (h = 15.8 mm.622 inch) 2. Inrush type available (TV-8 UL/C-UL
CENTIGRID SURFACE MOUNT COMMERCIAL RELAYS DPDT
Series S172 DPDT Non-Latching Commercial Electromechanical Relay CENTIGRID SURFACE MOUNT COMMERCIAL RELAYS DPDT SERIES S172 S172D RELAY TYPE DPDT basic relay DPDT relay with internal diode for coil transient
SRT2-ROC08, SRT2-ROC16
Ultra-miniature 8-point and 16-point Relaymounted Terminals Ultra-compact (8-point models: 101 x 51 x 51 mm (W x H x D); 16-point models: 156 x 51 x 51 mm (W x H x D)) MOS FET Relay and Relay models. DIN
Electrical Specification for: efo Wide range AC/DC Single 12V Output 400W Power Supply Telkoor Part Number: CUSTOMER SIZE CAGE CO
Electrical Specification for: efo400-112 Wide range AC/DC Single 12V Output 400W Power Supply Telkoor Part Number: 900-4136-0000 GENERAL SCALE RELEASE DATE PRELIMINARY SHEET 1 OF 5 REVISION HISTORY Rev
1.5 Solid State Relays
Relays.. Solid State Relays Application s Pins Contacts AC ratings DC ratings Socket CSS Series AC Solid state, Instantaneous switching CSS-I A / 0 V S0 AC Solid state synch. to zero crossing CSS-Z A /
IELR Rail-Mount Series Magnetic Circuit Protectors
IELR Rail-Mount IELR Rail-Mount Series Magnetic Circuit Protectors Introduction 92 Single Pole 93 Specifications 94 Operating Characteristics 95 Delay Curves 96 Approvals & Decision Tables 200 IELR Series
MCC SMA2EZ5.1D5 THRU SMA2EZ75D5. Features. 2 W Glass Passivated Junction Silicon Zener Diode Volts.
Features Mechanical Data TERMINALS : Solder plated, solderable per MIL-STD-7, method 6 POLARITY : Color band denotes positive end (cathode) omponents 76 Marilla Street Chatsworth!"# $%!"# Lead Free Finish/Rohs
OTB1E0DM9LP I/O distributed module OTB - Ethernet TCP/IP m
Characteristics I/O distributed module OTB - Ethernet TCP/IP - 0..100 m Main Range of product Product or component type Integrated connection type Mar 31, 2018 Modicon OTB I/O distributed module Discrete
MAXIMUM LOAD CURRENT 1 A SJ SERIES
SOLID STATE RELAY MAXIMUM LOAD CURRENT 1 A SJ SERIES RoHS compliant FEATURES UL, CSA recognized Extremely small and light weight Size: 10.0 (W) 20.2 (L) 12.8 (H) mm Weight: approximately 5.5g High reliability,
MCC. Revision: /06/09 1N5338B THRU 1N5369B
Features Zener Voltage From 5.V to 5V Case Material: Molded Plastic. UL Flammability Classification Rating 94V-0 For Available Tolerances See Note Marking : Cathode band and type number Maximum Ratings:
TWDLMDA40DTK extendable PLC base Twido 24 V - 24 I 24 V DC - 16 O solid state
Characteristics extendable PLC base Twido 24 V - 24 I 24 V DC - 16 O solid state Price* : 1050.00 USD Main Range of product Product or component type Discrete I/O number 40 Discrete input number 24 Discrete