AZ420 MINIATURE GENERAL PURPOSE RELAY
|
|
- Sabina Black
- 5 years ago
- Views:
Transcription
1 MINIATURE GENERAL PURPOSE RELAY FEATURES Rugged construction for high reliability Life expectancy greater than 100 million operations DC coils to 11 V Power consumption as low as 2 mw per pole available Current sensitive and voltage sensitive coils available Round core and large coil volume provide greater pull force Up to 6 poles in less than one cubic inch Dry circuit to Amp s Printed circuit or solder/plug-in terminals Balanced spring-held armature allows dependable operation in any position Sealed version available (2 and 4 pole) UL, CUR file E43203; VDE 0110 Gr. A CONTACTS Arrangement DPDT (2 Form C) 4PDT (4 Form C) 6PDT (6 Form C) Ratings Material Resistance COIL Power At Pickup Voltage (typical) Max. Continuous Dissipation Temperature Rise Standard Temperature Sensitive See data table under relay ordering data UL Rating: See table for UL approved ratings See data table under relay ordering data < 0 milliohms initially Standard: 40 mw, 2 or 4 pole Sensitive: 80 mw, 2 pole 180 mw, 4 pole (2 mw per pole available) 2.6 W at 20 C (68 F) ambient 2.0 W at 40 C (10 F) ambient 23 C (41 F) at nominal coil voltage,2 or 4 pole 40 C (72 F) at nominal coil voltage, 6 pole C (9 F) at nominal coil voltage, 2 pole 10 C (18 F) at nominal coil voltage, 4 pole Max. 10 C (221 F) GENERAL DATA Life Expectancy Mechanical Electrical Operate Time Release Time Capacitance (typical) Bounce (typical) Dielectric Strength (at sea level) Minimum operations 00 million See typical life expectancy table See typical operate and release time diagram See typical operate and release time diagram Contact to : 2 pf Contact to coil: 2 pf Contact to frame: 30 pf At 10 ma current 3 ms at nominal coil voltage 100 Vrms to coil 1000 Vrms all other points Insulation 1000 megohms min. at 2 C Resistance 00 VDC 0% RH Dropout Ambient Temperature Operating Standard Vibration Shock Enclosure Sensitive Storage Greater than % of nominal coil voltage At nominal coil voltage 2 and 4 pole type: - C (-67 F) to 80 C (176 F) 6 pole type: - C (-67 F) to 6 C (149 F) - C (-67 F) to 9 C (203 F) - C (-67 F) to 10 C (220 F) 0.062" DA at Hz 20 g Polycarbonate NOTES 1. Other coil resistances and sensitivities are available upon request. 2. All values at 20 C (68 F). 3. Bifurcated, fine silver/gold plated s are recommended for dry circuit switching. 4. Epoxy sealed versions for automatic wave soldering and cleaning are available.. Specifications subject to change without notice. Terminals Max. Solder Temp. Max. Solder Time Max. Solvent Temp. Max. Immersion Time Weight Plug-in: gold or tin plated copper alloy PC: tin plated copper alloy 270 C (18 F) seconds 80 C (176 F) 30 Seconds 23 to 3 grams
2 RELAY ORDERING DATA TWO POLE STANDARD DC VOLTAGE VERSION VDC VDC ± 10% VDC Terminals PC Terminals PC Terminals AZ * AZ * AZ * AZ420 1 * AZ428 1 * AZ * AZ * AZ * AZ * AZ * AZ * AZ * AZ * AZ * AZ * AZ * AZ * AZ * , AZ * AZ * AZ * , AZ420 6 * AZ428 6 * AZ * 72 10, AZ * AZ * AZ * , AZ * AZ * AZ * B. SENSITIVE DC VOLTAGE VERSION (Pickup 100 mw) VDC VDC ± 10% VDC Terminals PC Terminals PC Terminals AZ420 V1 * AZ428 V1 * AZ2428 V1 * AZ420 V10 * AZ428 V10 * AZ2428 V10 * AZ420 V70 * AZ428 V70 * AZ2428 V70 * , AZ420 V0 * AZ428 V0 * AZ2428 V0 * , AZ420 V04 * AZ428 V04 * AZ2428 V04 * C. SENSITIVE DC CURRENT VERSION (Pickup 8 mw) VDC VDC ± 10% (ma) Terminals PC Terminals PC Terminals , AZ420 C07 * AZ428 C07 * AZ2428 C07 * ,00.4 AZ420 C6 * AZ428 C6 * AZ2428 C6 * , AZ420 C04 * AZ428 C04 * AZ2428 C04 * , AZ420 C408 * AZ428 C408 * AZ2428 C408 * , AZ420 C03 * AZ428 C03 * AZ2428 C03 * *ORDERING PROCEDURE: To specify an AZ 420 series relay, combine the basic part number found in the Order Number section with a code found in the Contact Data Table. EXAMPLE: AZ LUS: A. Basic number: AZ indicates two pole, plug-in/ solder terminals, standard coil, 3 VDC, 14 ohms. B. Contact code: 40LUS indicates bifurcated fine silver/gold plated s, Form C, UL and CUR approved. CONTACT DATA TABLE 40LUS Bifurcated Max. Power: 6 W or 230 VA 4LUS Max. power 100 W or 30 VA 4HUS Max. power 22 W or 870 VA Fine silver/ Max. current: Dry circuit gold plated 2 Amps to 2 Amps Max. voltage: 10 VDC or 300 VAC Moveable: Max. current 1 ma to fine silver/ 2 Amps 2 Amps gold plated Max. voltage 10 VDC or 300 VAC If switching voltage is greater than 30 VDC, special precautions must be taken. Contact the factory. Max. current: 100 ma to Moveable: Amps Amps silver cadmium Max. voltage: oxide/gold 10 VDC or plated 300 VAC 0
3 RELAY ORDERING DATA FOUR POLE A. STANDARD DC VOLTAGE VERSION VDC VDC ± 10% VDC Terminals PC Terminals PC Terminals AZ * AZ * AZ * AZ421 1 * AZ429 1 * AZ * AZ * AZ * AZ * AZ * AZ * AZ * AZ * AZ * AZ * AZ * AZ * AZ * , AZ * AZ * AZ * , AZ421 6 * AZ429 6 * AZ * 72 10, AZ * AZ * AZ * , AZ * AZ * AZ * B. SENSITIVE DC VOLTAGE VERSION (Pickup 180 mw) VDC VDC ± 10% VDC Terminals PC Terminals PC Terminals AZ421 V18 * AZ429 V18 * AZ2429 V18 * AZ421 V12 * AZ429 V12 * AZ2429 V12 * AZ421 V80 * AZ429 V80 * AZ2429 V80 * , AZ421 V0 * AZ429 V0 * AZ2429 V0 * , AZ421 V04 * AZ429 V04 * AZ2429 V04 * *ORDERING PROCEDURE: To specify an AZ 421 series relay, combine the basic part number found in the Order Number section with a code found in the Contact Data Table. EXAMPLE: AZ LUS: A. Basic number: AZ indicates four pole, plugin/ solder terminals, standard coil, 3 VDC, 14 ohms. B. Contact code: 10LUS indicates bifurcated fine silver/gold plated s, Form C, UL and CUR approved. C. SENSITIVE DC CURRENT VERSION (Pickup 8 mw) VDC VDC ± 10% (ma) Terminals PC Terminals PC Terminals , AZ421 C07 * AZ429 C07 * AZ2429 C07 * , AZ421 C6 * AZ429 C6 * AZ2429 C6 * , AZ421 C04 * AZ429 C04 * AZ2429 C04 * , AZ421 C408 * AZ429 C408 * AZ2429 C408 * , AZ421 C03 * AZ429 C03 * AZ2429 C03 * CONTACT DATA TABLE 10LUS Bifurcated Max. Power: 6 W or 230 VA 1LUS Max. power 100 W or 30 VA 1HUS Max. power 22 W or 870 VA Fine silver/ Max. current: Dry circuit gold plated 2 Amps to 2 Amps Max. voltage: 10 VDC or 300 VAC Moveable: Max. current 1 ma to fine silver/ 2 Amps 2 Amps gold plated Max. voltage 10 VDC or 300 VAC If switching voltage is greater than 30 VDC, special precautions must be taken. Contact the factory. Max. current: 100 ma to Moveable: Amps Amps silver cadmium Max. voltage: oxide/gold 10 VDC or plated 300 VAC
4 RELAY ORDERING DATA SIX POLE A. STANDARD DC COIL VOLTAGE VERSION Nominal Max. Coil Must Plug-in/ Coil Continuous Resistance Operate Solder PC Terminals VDC VDC ± 10% VDC Terminals AZ * AZ * AZ * AZ * AZ * AZ * AZ * AZ * AZ * AZ * AZ * AZ * AZ * AZ * , AZ * AZ * , AZ431 0 * AZ439 0 * , AZ * AZ * B. SENSITIVE DC VOLTAGE VERSION (Pickup 20 mw) Nominal Max. Coil Must Plug-in/ Coil Continuous Resistance Operate Solder PC Terminals VDC VDC ± 10% VDC Terminals AZ431 V19 * AZ439 V19 * AZ431 V13 * AZ439 V13 * AZ431 V09 * AZ439 V09 * , AZ431 V60 * AZ439 V60 * 48 68, AZ431 V04 * AZ439 V04 * C. SENSITIVE DC CURRENT VERSION (Pickup 20 mw) Nominal Max. Coil Must Plug-in/ Coil Continuous Resistance Operate Solder PC Terminals VDC VDC ± 10% (ma) Terminals , AZ431 C07 * AZ439 C07 * , AZ431 C6 * AZ439 C6 * 1 102, AZ431 C04 * AZ439 C04 * ,000.0 AZ431 C408 * AZ439 C408 * , AZ431 C03 * AZ439 C03 * *ORDERING PROCEDURE: To specify an AZ 431 series relay, combine the basic part number found in the Order Number section with a code found in the Contact Data Table. EXAMPLE: AZ LUS: A. Basic number: AZ indicates six pole, plugin/ solder terminals, standard coil, 3 VDC, 11 ohms. B. Contact code: 10LUS indicates bifurcated fine silver/gold plated s, Form C, UL and CUR approved. CONTACT DATA TABLE VAC (Typical) 10LUS Bifurcated Max. Power: 6 W or 230 VA Fine silver/ Max. current: Dry circuit gold plated 2 Amps to 2 Amps Max. voltage: 10 VDC or 300 VAC 1LUS * Max. power: 100 W or 30 VA Moveable: Max. current: 1 ma to fine silver/ 2 Amps 2 Amps gold plated Max. voltage: 10 VDC or 300 VAC 1LUS ** Max. power: button 6 W or 230 VA Fine silver/ Max. current: Low level gold plated 2 Amps to 2 Amps Max. voltage: 10 VDC or 300 VAC 1HUS * Max. power: 22 W or 870 VA Moveable: Max. current: 100 ma to silver cadmium Amps Amps oxide/gold Max. voltage: 10 plated VDC or 300 VAC 1HUS ** Max. power: button 140 W or 7 VA Silver cadmium Max. current: 100 ma to oxide Amps Amps Max. voltage: 10 VDC or 300 VAC * Contact for Standard DC Voltage version only (Table A). ** Contact code for Sensitive DC Voltage version only (Table B) and sensitive DC current version. If switching voltage is greater than 30 VDC, special precautions must be taken. Contact the factory. 0
5 TYPICAL CONTACT LIFE EXPECTANCY WHILE SWITCHING RESISTIVE LOADS NUMBER OF OPERATIONS CONTACT STANDARD SENSITIVE CURRENT VOLTAGE CODE COIL COIL ADJUSTMENT ADJUSTMENT 1 MA.1 VDC 1 X X 10 8 LUS 10 MA 6 VDC 1 X X A 28 VDC 6 X 10 X 10 2 A 11 VAC 6 X 10 X 10 HUS A 28 VDC 1 X 10 1 X 10 4 A 11 VDC 1 X 10 1 X 10 4 NOTE: Relays operate at nominal coil voltage or 1.33 x must operate value for sensitive versions. UL APPROVED CONTACT RATINGS CONTACT CODE 40LUS, 10LUS 4LUS, 1LUS 4HUS, 1HUS UL RATINGS 2 Amps at 26 VDC and 11 VAC 2 Amps at 28 VDC and 11 VAC Amps at 28 VDC and 11 VAC TYPICAL OPERATE AND RELEASE TIME (STANDARD DC VOLTAGE VERSION) 2 OPERATE TIME (MILLISECONDS) RELEASE TIME (MILLISECONDS) MUTIPLE OF MUST OPERATE VOLTAGE NOTES: 1. Coils not diode suppressed 2. Switched battery voltage source
6 MECHANICAL DATA SOLDER/PLUG IN TERMINALS PC BOARD TERMINALS.73 Max (18.7).197 () Max (30).73 Max (18.7).940 Max 2 Pole (24) Max 4 Pole (30) 1.39 Max 6 Pole (36).940 Max 2 Pole (24) Max 4 Pole (30) 1.39 Max 6 Pole (36).416 (10.6) (9) NIB.091 DIA x.030 High (2.3) (0.8).098 (2.) 2 Holes.040 DIA (1).177 (4.) 3-48 NC 2A.043 ±.002 (1.1 ± 0.0).134 (3.4).040 (1) Max (31) PC BOARD LAYOUT SUGGESTED PANEL LAYOUT.169 Ref (4.3).406 (10.3) Holes.00 DIA (1.3) Pole (8.7).62 4 Pole (14.3) Pole (19.8).940 Max 2 Pole (24) Max 4 Pole (30).320 (8.1) 1.39 Max 6 Pole (36).142 Ref (3.6).106 (2.7).212 (.4).43 (13.8) (13.) (10.8).281 (7.1) 2 Holes.120 DIA (3) (9).66 (16.7).140 (3.).281 (7.1).48 (11.6).138 Ref (3.) Viewed toward terminals Dimensions in inches with metric equivalents in parentheses. Tolerance: ±.010"
7 WIRING DIAGRAM FORM C CONTACT TWO POLE FOUR POLE SIX POLE * Viewed toward terminals * Not available in sealed version MECHANICAL DATA AZ2428; 2429 Versions 1. TWO POLE (DPDT).70 (19).11 (2.9).010 (0.3) (30.).980 (24.9) 2. FOUR POLE (4PDT).70 (19).11 (2.9).010 (0.3) (30.) (30.7).010 ±.00 (0.2 ±.13) TYP..042 ±.00 (1.0 ±.13) TYP.
8 Sockets & Hardware for AZ420 Series GENERAL DATA Dielectric Strength (at sea level) 100 Vrms between all elements FEATURES International standard spacing accommodates most cradle-type relays Unique knife-edge connector assures positive Unbreakable fiberglass filled polyester base material Spacing riser prevents flux contamination PC terminal spacing for 0.1 or 0.2 inch grids UL CUR file E17133 ORDERING DATA # OF POLES SOCKET RETAINING CLIPS 2 ST140 A1 ST ST141 A1 ST141 1 Insulation Resistance Current Rating Ambient Temperature ohms minimum at 2 C, 100 VDC Amps maximum, continuous - C (-67 F) to 10 C (220 F) Maximum Temperature Machine soldering: 240 C (460 F) Vibration Shock Terminals Contact Material 10 g at Hz (socket soldered into PC board with relay inserted and held in place with retainer) 0 g any position (socket soldered into PC board with relay inserted and held in place with retainer) Combination type facilitates hand wiring or PC board mounting Tin bronze silver plated MECHANICAL SPECIFICATIONS MECHANICAL DATA PANEL LAYOUT PC BOARD LAYOUT [30.1].748 [19.0] [9.0] CLEARANCE HOLE FOR RELAY MOUNTING STUD OR GROUND CLIP ø.126 [ø3.2].426 [10.8].173 [4.4] 4 POLE.30 [8.9].413 [10.].010 [0.2].042 [1.06] RETAINING CLIP (30.9).120 (3.04) 1.30 (33.02).120 (3.04).140 [3.6].280 [7.1].66 [16.7] [9.0].62 [14.3].280 [7.1] 2x ø.120 [3.0].173 [4.4] HOLE FOR GROUND CLIP ø.02 [ø1.3].10 [3.81] [2.4] G [11.4] 1 [2.4].00 [12.7] VIEWED TOWARD TERMINALS [2.4].978 [24.8].748 [19.0] [9.0] CLEARANCE HOLE FOR RELAY MOUNTING STUD OR GROUND CLIP ø.126 [ø3.2].426 [10.8].173 [4.4] 2 POLE.30 [8.9].413 [10.] RETAINING CLIP.010 [0.2].042 [1.06] 1.00 (2.4).120 (3.04) 1.30 (33.02).120 (3.04).140 [3.6].280 [7.1].66 [16.7] [9.0].343 [8.7].280 [7.1] 2x ø.120 [3.0].173 [4.4] HOLE FOR GROUND CLIP ø.02 [ø1.3].10 [3.81] [2.4] [11.4] G 1 [2.4].00 [12.7] VIEWED TOWARD TERMINALS [2.4] Dimensions in inches with metric equivalents in parentheses. Tolerance: ±.010"
CENTIGRID SURFACE MOUNT COMMERCIAL RELAYS DPDT
Series S172 DPDT Non-Latching Commercial Electromechanical Relay CENTIGRID SURFACE MOUNT COMMERCIAL RELAYS DPDT SERIES S172 S172D RELAY TYPE DPDT basic relay DPDT relay with internal diode for coil transient
More informationCENTIGRID SURFACE MOUNT COMMERCIAL RELAYS SENSITIVE DPDT
Series S134 DPDT Non-Latching Commercial Electromechanical Relay CENTIGRID SURFACE MOUNT COMMERCIAL RELAYS SENSITIVE DPDT SERIES S134 S134D S134DD RELAY TYPE DPDT basic relay DPDT relay with internal diode
More informationCENTIGRID SURFACE MOUNT COMMERCIAL RELAYS DPDT
Series S114 DPDT Non-Latching Commercial Electromechanical Relay CENTIGRID SURFACE MOUNT COMMERCIAL RELAYS DPDT SERIES S114 S114D S114DD DESCRIPTION RELAY TYPE DPDT basic relay DPDT relay with internal
More informationV REG.-Nr. 3919, Z E214024
General Purpose Relays SCHRACK Miniature Power PCB Relay MSR 1 pole 8 / 10 A, 1CO or 1NO contact High inrush currents with AgSnO contacts (TV4 = 65 A) 4 kv/8 mm coil-contact Reinforced insulation (protection
More informationCENTIGRID SURFACE MOUNT COMMERCIAL RELAYS DPDT RELAY TYPE. DPDT basic relay DPDT relay with internal diode for coil transient suppression DESCRIPTION
CENTIGRID SURFACE MOUNT COMMERCIAL RELAYS DPDT SERIES S172 SERIES DESIGNATION RELAY TYPE S172 S172D DPDT basic relay DPDT relay with internal diode for coil transient suppression INTERNAL CONSTRUCTION
More informationIce Cube Relays. R2/R4 Plug-in Power Relays... G58 Technical Information... G63. R15 Plug-in Power Relays... G68 Technical Information...
Ice Cube Relays R2/R4 Plug-in Power Relays... 58 Technical Information... 63 R15 Plug-in Power Relays... 68 Technical Information... 72 RUC Plug-in Power Relays... 76 Technical Information... 79 RY2 Plug-in
More informationVZBs. Power PCB Relay RT2 2 pole 8 A, DC and AC-coil. Features. Contact data
Features 2 C/O or 2 N/O contacts Sensitive coil 400 mw DC- or AC-coil 5 kv / 10 mm coil-contact Protection class II (VDE 0700) Height 15.7 mm Sockets with PCB-type or screw-type terminals Applications
More informationKU series KUP Enclosed Relay KUIP VDE 8mm Coil to Contacts KUGP VDE 8mm 3mm Gap Coil to Contacts KUEP 10 Amp 150VDC Load Switching KUMP 15 Amp 277VAC
P& KU series KUP Enclosed Relay KUIP VDE 8mm Coil to Contacts KUGP VDE 8mm 3mm Gap Coil to Contacts KUEP 10 mp 150VDC Load Switching KUMP 15 mp 2VC File E2255 File LR1534 0435 Registration 12 (KUIP) 0435
More informationCENTIGRID SURFACE MOUNT COMMERCIAL RELAYS
CENTIGRID SURFACE MOUNT COMMERCIAL RELAYS DPDT SERIES S114 SERIES DESIGNATION RELAY TYPE S114 S114D S114DD DPDT basic relay DPDT relay with internal diode for coil transient suppression DPDT relay with
More informationKU series KUP Enclosed Relay KUIP VDE 8mm Coil to Contacts KUGP VDE 8mm 3mm Gap Coil to Contacts KUEP 10 Amp 150VDC Load Switching KUMP 15 Amp 277VAC
KU series KUP Enclosed Relay KUIP VDE 8mm Coil to Contacts KUGP VDE 8mm 3mm Gap Coil to Contacts KUEP 10 mp 150VDC Load Switching KUMP 15 mp 2VC File E2255 File LR1534 0435 Registration 12 (KUIP) 0435
More informationCENTIGRID ESTABLISHED RELIABILITY RELAY DPDT SENSITIVE CMOS COMPATIBLE RELAY TYPE
ESTABLISHED RELIABILITY SERIES DESIGNATION 136C CENTIGRID ESTABLISHED RELIABILITY RELAY DPDT SENSITIVE CMOS COMPATIBLE RELAY TYPE DPDT sensitive relay with internal power MOSFET driver, Zener diode gate
More informationHIGH REPEATABILITY BROADBAND TO-5 RELAYS DPDT RELAY TYPE PERFORMANCE FEATURES
RF & MICROWAVE HIGH REPEATABILITY BROADBAND TO-5 RELAYS DPDT SERIES SERIES DESIGNATION RELAY TYPE Repeatable RF relay Sensitive, repeatable RF relay INTERNAL CONSTRUCTION PERFORMANCE FEATURES UPPER STATIONARY
More informationSlim Industrial Relay Type RSLM Electromechanical
Type RSLM Electromechanical RSLM Slim size (width 5mm) High breakdown voltage 4kV (between coil and contacts) Surge voltage up to 6kV (between coil and contacts) Conforms to VDE 0700, 0631 reinforced insulation
More information4 C/O. Contact material AgNi AgNi gold-plated Nominal contact current Inrush current
Quattro-Relais Quattro Relay 4 Quattro Relay 4A4 Standard type / With LED and protection diode on request Quattro-Relais Order Code Order Code Quattro Relay 4 A 4 4 V DC N Type of relay Quattro Relay 4
More informationCENTIGRID ESTABLISHED RELIABILITY RELAY DPDT CMOS COMPATIBLE RELAY TYPE
ESTABLISHED RELIABILITY SERIES DESIGNATION 116C CENTIGRID ESTABLISHED RELIABILITY RELAY DPDT CMOS COMPATIBLE RELAY TYPE DPDT general-purpose relay with internal power MOSFET driver, Zener diode gate protection,
More informationPERFORMANCE SPECIFICATION
INCH-POUND MIL-PRF-6106/13F 17 November 2011 SUPERSEDING MIL-PRF-6106/13E 10 November 2000 PERFORMANCE SPECIFICATION RELAY, ELECTROMAGNETIC, 25 AMPERE, 3PST, NO, WITH 2 AMPERE 1PDT AUXILIARY CONTACTS,
More informationSolid-state Timer H3YN
Solid-state Timer H3YN Miniature Timer with Multiple Time Ranges and Multiple Operating Modes Minimizes stock. Pin configuration compatible with MY Power Relay. Standard multiple operating modes and multiple
More informationAdvantages of a Full Featured 700 Series Relay
SECTION 1 Advantages of a Full Featured 700 Series Relay Since the launch of the 700 series relays in 2000, this product line has continuously evolved both functionally and visually. The 700 series product
More informationBROADBAND HIGH REPEATABILITY TO-5 RELAY SPDT DC 8 GHz
BROADBAND HIGH REPEATABILITY TO-5 RELAY SPDT DC 8 GHz SERIES RF311 RF331 SERIES DESIGNATION RF311 RF331 RELAY TYPE SPDT RF TO-5 relay Sensitive, SPDT RF TO-5 relay INTERNAL CONSTRUCTION UNI-FRAME ARMATURE
More informationPERFORMANCE SPECIFICATION SHEET
INCH-POUND MIL-PRF-39016/41E 15 June 2005 SUPERSEDING MIL-PRF-39016/41D 20 July 1988 PERFORMANCE SPECIFICATION SHEET RELAYS, ELECTROMAGNETIC, ESTABLISHED RELIABILITY, DPDT, LOW LEVEL TO 1 AMPERE, TERMINALS
More informationSPST-NO SPDT DPST-NO DPDT
Next-generation PCB Relay Available in Various Models ROHS compliant. High sensitivity: (250mW) and high capacity (16A) models available Low profile: 15.7 mm max. in height. Conforms to EN 61810-1, UL508
More informationHIGH REPEATABILITY, NORMALLY OPEN, BYPASS RF RELAYS RELAY TYPE PERFORMANCE FEATURES
RF & MICROWAVE HIGH REPEATABILITY, NORMALLY OPEN, BYPASS RF RELAYS SERIES SERIES DESIGNATION Repeatable, RF, N.O. bypass relay RELAY TYPE Sensitive, repeatable, RF, N.O. bypass relay INTERNAL CONSTRUCTION
More informationPERFORMANCE SPECIFICATION SHEET
PERFORMANCE SPECIFICATION SHEET INCH-POUND w/amendment 1 22 September 2005 SUPERSEDING MIL-PRF-39016/19G 1 April 2005 RELAYS, ELECTROMAGNETIC, ESTABLISHED RELIABILITY, DPDT, LOW LEVEL TO 1 AMPERE WITH
More information78 Series Electromechanical Relay Selection Guide
78 Series Electromechanical Relay Selection Guide Specification 781 Series 782 Series 783 Series 784 Series Coil Voltages Configuration SPDT DPDT 3PDT 4PDT Contact Rating 15A 15A 15A 15A Base Socket 5
More information2 POLES 1 to 2 A (FOR SIGNAL SWITCHING)
FUJITSU TAKAMISAWA COMPONENT CATALOG MINIATURE RELAY 2 POLES 1 to 2 A (FOR SIGNAL SWITCHING) FEATURES Ultra high sensitivity High reliability-bifurcated contacts Conforms to FCC rules and regulations Part
More informationAlphanumeric Index. Circuit Breakers Transformers Low-signal PC Board Relays
Alphanumeric Index Series Type Page 0419... Relay w/dust Cover... 745 K10... Relay w/dust Cover... 720 KA... Open Relay... 737 KH/KHA... Relay w/dust Cover... 709 KHS. DISCONTINUED...Hermetically Sealed
More informationSolid-state Timer. Ordering Information. Miniature Timer with Multiple Time Ranges and Multiple Operating Modes H3YN- - Accessories (Order Separately)
Solid-state Timer Miniature Timer with Multiple Time Ranges and Multiple Operating Modes Minimizes stock. Pin configuration compatible with MY Power Relay. Standard multiple operating modes and multiple
More information2 pole telecom relay, polarized, Through Hole Type (THT) or Surface Mount Technology (SMT), Relay types: non-latching with 1 coil latching wit
E-MAIL: The Best Relaytion ISO 9001 E-MAIL: 2 pole telecom relay, polarized, Through Hole Type (THT) or Surface Mount Technology (SMT), Relay types: non-latching with 1 coil latching with 2 coils latching
More informationDistinctive Characteristics
Distinctive Characteristics Low Profile Pushbuttons Series UB Bright, full face, or spot illumination with red, amber, or green single-element LEDs (an integral part of the switch), plus square or rectangular
More informationDistinctive Characteristics
Distinctive Characteristics Full face, bright LED illumination in choice of red, green, and amber for visible status indication. 9-amp or 6-amp electrical capacity in compact body. Interior shield prevents
More informationDistinctive Characteristics
Distinctive Characteristics Top or side actuation permits flexible board design. Compact dimensions and low profile allow high density mounting and close stacking of PC boards. Crisp actuation positively
More informationPRODUCT SPECIFICATION. PC Board Relays. Series.
PRODUCT SPECIFICATION PC Board Relays 26 Series www.wernerelektrik.com Technical Data... Specifications...2 Model Number Structure - Relays...3 Model Number Selection...4 Dimensions... 5-6 Accessories...7
More informationGeneral Purpose Relays R2N/R4N Miniature Power Plug-in Relays
eneral Purpose Relays R2N/R4N Miniature Power Plug-in Relays The Relpol R2N and R4N eneral Purpose Miniature Power Relays, typically called miniature cube type in the industry, offer high reliability and
More informationTransistor drive 2c/4c 5A slim power relays
Transistor drive c/c 5A slim power relays NC RELAYS NC Flat type () NC (Plug-in type) RoHS compliant NC Flat type () NC () FEATURES 1. Compact, slim design Use of high-performance flat electromagnetic
More information1 POLE 8 A (MEDIUM LOAD CONTROL)
FUJITSU TAKAMISAWA COMPONENT CATALOG POWER RELAY 1 POLE 8 A (MEDIUM LOAD CONTROL) FEATURES UL, CSA, VDE, SEV, SEMKO, FIMKO, ÖVE, BSI recognized UL class B (130 C) insulation 1 form A (SPST-NO) or 1 form
More informationHIGHLY SENSITIVE 1500 V FCC SURGE BREAKDOWN VOLTAGE MINIATURE RELAY
HIGHLY SENSITIVE 1500 V FCC SURGE BREAKDOWN VOLTAGE MINIATURE RELAY DS RELAYS RoHS Directive compatibility information http://www.mew.co.jp/ac/e/environment/ FEATURES 1. Breakthrough height of 9.8 mm.386
More informationPERFORMANCE SPECIFICATION SHEET
PERFORMANCE SPECIFICATION SHEET INCH-POUND 1 April 2005 SUPERSEDING MIL-PRF-39016/18G 20 July 1988 RELAYS, ELECTROMAGNETIC, ESTABLISHED RELIABILITY, DPDT, LOW LEVEL TO 1.0 AMPERE WITH INTERNAL DIODE FOR
More information7. Approved Standards US: UL, CSA UL: FILE No.E CSA: FILE No.LR31928) 8. Special Function None : Standard U : For ultrasonically cleanable
Subminiature, Sensitive SPDT Signal Switching Relay High sensitivity: 98-mW (Rated power consumption: mw) pickup coil power. Impulse withstand of 1,V ( 1 μs) meets FCC requirements. Stick packing employed
More informationPOWER RELAY. NY Series. 1 POLE - 5A Slim Type FTR-K1 SERIES FEATURES
FTR-K1 SERIES POWER RELAY 1 POLE - 5A Slim Type NY Series FEATURES Slim type with 5 mm thickness - Suited for high density mounting Low power consumption and high sensitivity - Nominal coil power: 120
More informationHIGH REPEATABILITY, Signal Integrity: 20Gbps TO-5 RELAYS, DPDT
Series SI800 / SI803 HIGH REPEATABILITY, Signal Integrity: 20Gbps TO-5 RELAYS, DPDT SERIES SI800 SI803 RELAY TYPE Repeatable, Signal Integrity relay for high bit rate applications Low Power Operating Coil,
More informationSolid-state Timer. Ordering Information. Specifications. Miniature Timer Compatible with the MY Relay. Accessories. Time Ranges
Solid-state Timer Miniature Timer Compatible with the MY Relay Large transparent time-setting knob facilitates time setting. Flat-blade and Phillips screwdrivers can also be used for time setting. Approved
More informationOrdering Information. I/O Relay G7T. Model Number Legend Slim-styled I/O Relay Saves Space in Panel
I/O Relay CSM DS_E_2_ Slim-styled I/O Relay Saves Space in Panel SPST-NO, SPST-NC, and SPDT contact forms available for output (SPST-NO only for input). Ultra-slim housing measuring 29 (W) x 0 (D) x 2
More informationP2 V23079 Relay Sept 06 Rev. D ECOC: JM10
108-98002 Sept 06 Rev. D ECOC: JM10 Index UL 508 File No. E 111441 UL 60950 IEC/EN60950 IEC Ref. Cert. No. 3271 Dimensions 4 Coil Operating Range 5 Relay Code 6 Coil Data and Ordering Information 7 Contact
More informationProducts :: Circuit Protection :: Hydraulic/Magnetic Circuit Breakers
Products :: Circuit Protection :: Hydraulic/Magnetic Circuit Breakers Miniature Hydraulic/Magnetic Circuit Breaker M-Series M-Series PDF elibrary The M-Series miniature hydraulic/magnetic circuit breakers
More informationKuhnke Technical Data. Contact Details
Kuhnke Technical Data The following page(s) are extracted from multi-page Kuhnke product catalogues or CDROMs and any page number shown is relevant to the original document. The PDF sheets here may have
More informationNOT FOR NEW DESIGNS AS SERIES. 2 POLES 1 to 2 A (FOR SIGNAL SWITCHING) MINIATURE RELAY FEATURES ORDERING INFORMATION
MINIATURE RELAY 2 POLES 1 to 2 A (FOR SIGNAL SWITCHING) FEATURES Flat type relay for surface mounting Super small and light weight Height: 6.5 mm Weight: approximately 1.5 g UL, CSA recognized Conforms
More informationRA4 SERIES. 4 POLES 1 to 2 A (FOR SIGNAL SWITCHING) MINIATURE RELAY. RoHS Compliant FEATURES ORDERING INFORMATION SAFETY STANDARD AND FILE NUMBERS
MINIATURE RELAY 4 POLES 1 to 2 A (FOR SIGNAL SWITCHING) RA4 SERIES RoHS Compliant FEATURES Ultra high sensitivity High reliability-bifurcated contacts Conforms to FCC rules and regulations Part 68 Dielectric
More informationPERFORMANCE SPECIFICATION SHEET
INCH-POUND MIL-PRF-39016/23F 15 June 2005 SUPERSEDING MIL-PRF-39016/23E 20 July 1988 PERFORMANCE SPECIFICATION SHEET RELAYS, ELECTROMAGNETIC, ESTABLISHED RELIABILITY, SPDT, LOW LEVEL TO 1.0 AMPERE WITH
More informationAUTOMOTIVE MICRO-ISO RELAY FEATURES
AUTOMOTIVE MICRO-ISO RELAY RELAYS...... Compliance with RoHS Directive FEATURES Micro-ISO type terminals Small size: mm(l) mm(w) mm(h). inch(l). inch(l). inch(h) Wide line-up PC board and, Resistor and
More informationHIGHLY SENSITIVE 1500 V FCC SURGE BREAKDOWN VOLTAGE MINIATURE RELAY
HIGHLY SENSITIVE 15 V FCC SURGE BREAKDOWN VOLTAGE MINIATURE RELAY DS RELAYS FEATURES 1. Breakthrough height of 9.8 mm.386 inch beats the 1 mm.394 inch limit 1c, 2c, and 4c all have the same height (9.8
More informationRA SERIES. 2 POLES 1 to 2 A (FOR SIGNAL SWITCHING) MINIATURE RELAY. RoHS Compliant FEATURES ORDERING INFORMATION SAFETY STANDARD AND FILE NUMBERS
MINIATURE RELAY 2 POLES 1 to 2 A (FOR SIGNAL SWITCHING) RA SERIES RoHS Compliant FEATURES Ultra high sensitivity High reliability-bifurcated contacts Conforms to FCC rules and regulations Part 68 Dielectric
More informationLong seller backed by product variety and high reliability
Long seller backed by product variety and high reliability DS RELAYS RoHS compliant FEATURES 1. Breakthrough height of 9.8 mm.386 inch beats the 1 mm.394 inch limit 1c and 2c all have the same height (9.8
More informationCOIL CHARACTERISTICS (Vdc) SERIES H,HD,HP,HT,HTD,HPT GENERAL CHARACTERISTICS. Date of issue: 06/ Page 2 of 5. B Vdc
ENGINEERING DATA SHEET CONTACTOR AMP BalancedForce Design Hermetically sealed Designed to the performance standards of MILPRF6 PRINCIPLE TECHNICAL CHARACTERISTICS Contacts rated at 8 and 5 Vac, 400 Hz,
More informationIntroduction to High Current Card Edge Connectors
Introduction to High Current Card Edge Connectors Product Facts Contacts on.100 [2.54] Centerlines Selective gold plating of contacts for high performance at low cost Flow solder applications Glass-filled
More informationD2VW. Sealed Miniature Basic Switch. Ordering Information Model Number Legend D2VW- -
Sealed Miniature Basic Switch Sealed Miniature Basic Switch Conforms to IP67 (Molded Lead Wire Type Only) Use of epoxy resin assures stable sealing, making this switch ideal for places subject to water
More informationD2D. Door Interlock Switch. Ordering Information. Power Switch with Minimum Contact Gap of 3 mm. Model Number Legend.
Door Interlock Switch Power Switch with Minimum Contact Gap of 3 mm Offers the minimum contact gap of 3 mm required for power switches as standard equipment. Highly reliable design conforms to European
More informationMINI-ISO AUTOMOTIVE RELAY
MINI-ISO AUTOMOTIVE RELAY CB RELAYS RoHS compliant FEATURES This relay has an Mini-ISO (International Organization for Standardization) terminal arrangement. Relay is compact and high capacity (4 A). Compact
More informationRM84 / RM85 / RM87 Miniature Electromagnetic Relays
Miniature dimensions Cadmium - free contacts 5000 V / 10 mm reinforced insulation For PCB and plug-in sockets Available special versions with the increased dielectric strength of the contact clearance
More informationDistributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. MINIATURE RELAY 2 POLES 1 to 2 A (FOR SIGNAL SWITCHING) A SERIES RoHS Compliant
More informationOrdering Information. I/O Relay G7T. Model Number Legend Slim-styled I/O Relay Saves Space in Panel
I/O Relay CSM DS_E_4_4 Slim-styled I/O Relay Saves Space in Panel SPST-NO, SPST-NC, and SPDT contact forms available for output (SPST-NO only for input). Ultra-slim housing measuring 29 (W) x 0 (D) x 2
More informationAXICOM Telecom-, Signal and RF Relays. P2 V23079 Relay Nov. 07 Rev. E ECOC: JM10
108-98002 Nov. 07 Rev. E ECOC: JM10 Disclaimer While Tyco Electronics has made every reasonable effort to ensure the accuracy of the information in this datasheet, Tyco Electronics does not guarantee that
More informationALLEN BRADLEY RELAY Bulletin 700-HF
ALLEN BRADLEY RELAY Bulletin 700-HF Contact Rating DPDT, 3PDT, 4PDT Plug-in Quick Connect Solder Terminals Options: LED, Push-to-Test Operator DEMENSIONS: Bulletin 700-HF Relay (DPDT) Bulletin 700-HF (3PDT)
More informationRUC industrial relays of small dimensions
RUC industrial relays of small dimensions 135 with adaptor (V) Contact data Number and type of contacts Contact material Rated / max. switching voltage Min. switching voltage Rated load Min. switching
More informationH3CR-F H3CR-F8 H3CR-F-300 H3CR-F8-300
R Solid-State Repeat-Cycle Timer 1/1 DIN Solid-State Repeat-Cycle Timer Wide power supply ranges of 100 to 240 VAC 24 VAC/VDC, 12VDC Combinations of independent long or short / time settings are possible
More informationClassification Enclosure rating Input voltage Type of
Slim Relay G2RV The World's First Industrial Slim Relay Large plug-in terminals for reliable connection. LED indicator and mechanical flag to check operation. Special input type with gold plated contacts.
More informationSlim Relay G2RV. Model Number Structure. Ordering Information. Model Number Legend. List of Models. Relay and Socket Combinations
Slim Relay G2RV The World's First Industrial Slim Relay Large plug-in terminals for reliable connection. LED indicator and mechanical flag to check operation. Transparent housing enables checking relay
More information1 POLE - 10A Low Profile Type. (c) Coil type A : Standard type (530mW) D : High sensitive type (400mW - V type only)
FTR-K1 SERIES POWER RELAY 1 POLE - 10A Low Profile Type FTR-H1 Series FEATURES Working class: B (for IMQ)/ C (for VDE) Type of service: continuous duty Low profile (height 16.5 mm) 1 form A/ 1 form C 10
More informationUltra Slim Relays 24
Ultra Slim Relays 24 Technical Data... 1 Specifications.2 Model Number Structure - Relays...3 Model Number Selection...4 Accessories...5 Safety Precautions...6 Ultra Slim Relays WERNER`s embody the latest
More information1 POLE - 5A Medium Load Control
FTR-K1 SERIES POWER RELAY 1 POLE - 5A Medium Load Control VE Series FEATURES UL, CSA, VDE, CQC recognized 1 form A (SPST-NO) or 1 form C (SPDT) contact Low cost, miniature relay with big performance in
More informationThe Best Relaytion. P2 Relay ISO 9001
The Best Relaytion P2 Relay ISO 9001 2 pole telecom relay, polarized, Through Hole Type (THT) or Surface Mount Technology (SMT), Relay types: non-latching with 1 coil latching with 2 coils latching with
More information16 g SS-01GL-FD SS-01GL-F SS-01GL-FT 50 g SS-01GLD SS-01GLD1 SS-01GLD2 SS-01GL SS-01GLT Simulated roller lever
Snap Action Switch SS Subminiature Snap Action Switch Economical, subminiature snap action switch offers long service life (30 million operations minimum) All models are free from overtravel restrictions,
More informationNew relay, production not started, engineering samples available. 1 POLE - 8A Reflow Solderable Relay
New relay, production not started, engineering samples available FTR-K1 SERIES POWER RELAY 1 POLE - 8A Reflow Solderable Relay JS Series FEATURES UL class B (130 C) coil wire insulation 1 form A (SPST-NO)
More informationKuhnke Technical Data. Contact Details
Kuhnke Technical Data The following page(s) are extracted from multi-page Kuhnke product catalogues or CDROMs and any page number shown is relevant to the original document. The PDF sheets here may have
More informationTimers. GT5Y Series ON Delay Timers. ±3% maximum (over 10 to 50 C, reference temperature 20 C) Setting Error. ±10% maximum
GT5Y GT5Y Series ON Delay Key features: 4PDT, 3A or DPDT, 5A contacts 4 time ranges Repeat error ±0.2% maximum Control settings by hand or screwdriver Power ON and timing out LED indicators Uses the same
More informationRY SERIES. 2 POLES 1 to 2 A (FOR SIGNAL SWITCHING) MINIATURE RELAY FEATURES ORDERING INFORMATION
MINIATURE RELAY 2 POLES 1 to 2 A (FOR SIGNAL SWITCHING) FEATURES Ultra high sensitivity UL, CSA recognized Conforms to FCC rules and regulations Part 68 Surge strength 1,500 V High dielectric strength
More informationFiltered Combo D-Subminiature Connectors
Filtered Combo D-Subminiature Connectors Spectrum s line of filtered combo D-subs provide high insertion loss with tubular capacitive filtering. These connectors are available with 20 Amp power contacts,
More information2 POLES - 2 A (Slim Profile Signal Relay)
FTR-K1 SERIES ULTRA MINIATURE RELAY 2 POLES - 2 A (Slim Profile Signal Relay) FTR-B4 Series FEATURES DPDT 2C Ultra miniature slim type relay for surface mounting Height: 9.3 mm maximum (THT) 10 mm maximum
More informationD2SW-3L1HS D2SW-01L1HS
Sealed Snap Action Switch D2SW Watertight Miniature Snap Action Switch High-quality watertight miniature Snap Action switch. Switch Body meets IP67 (IEC 529) requirements Monoblock construction assures
More informationHIGH PERFORMANCE MINIATURE SWITCHES WITH WIDE RANGE
HIGH PERFORMANCE MINIATURE SWITCHES WITH WIDE RANGE NV (AH7) SWITCHES FEATURES Extra long-life spring mechanism More than 10 7 mechanical operations, 10 electrical High contact rating of 1 Amps with an
More informationA SERIES. 2 POLES 1 to 2 A (FOR SIGNAL SWITCHING) MINIATURE RELAY. To be discontinued. RoHS compliant
MINIATURE RELAY 2 POLES 1 to 2 A (FOR SIGNAL SWITCHING) RoHS compliant FEATURES Extremely low profile and light weight Height: 5 mm Weight: approximately 1.2 g Meet FCC (Part 68) standard Conforms to FCC
More informationSERIES FEATURE MAX RATING MECHANICAL LIFE APPROVALS CIRCUITRY. B1 Ultra Small 2A 100,000 N/A SPST, SPDT
SWITCH SELECTION GUIDE Basic Switches SERIES FEATURE MAX RATING MECHANICAL LIFE APPROVALS CIRCUITRY (Resistive) B1 Ultra Small 2A 100,000 N/A SPST, SPDT B1-5 Levers 2A 1,000,000 N/A SPST, SPDT B2 Subminiature
More informationLong seller backed by product variety and high reliability
Long seller backed by product variety and high reliability DS RELAYS Compliance with RoHS Directive FEATURES 1. Breakthrough height of 9.8 mm.386 inch beats the 1 mm.394 inch limit 1c and 2c all have the
More informationTime Delay Values (E-Series)
Time Delay Values (ESeries) AC Instantaneous 00 0 INSTANTANEOUS CURVE NO. 20 00 0 DC D.C. INSTANTANEOUS CURVE NO. 0 0. 0..0.0.00 200 300 400 500 700 800 900 0 200.00 200 300 400 500 700 800 900 0 200 Short
More informationSIGNAL RELAY. FTR-C2 Series. 2 POLES - 2A High Isolation Wide Contact Gap FTR-K1 SERIES FEATURES
FTR-K1 SERIES SIGNAL RELAY 2 POLES - 2A High Isolation Wide Contact Gap FTR-C2 Series FEATURES DPDT 2A Contact gap: more than 2.0mm Conforms to IEC60950 / EN60950 / UL1950/ CSA C22.2 No.950 Working voltage
More informationGeneral Specifications
Series M00 Tipped Rockers & Paddles Touch Tilt Rockers Toggles Slides Rotaries Programmable Illuminated P Pushbuttons Supplement Accessories Indicators Tactiles Keylocks General Specifications Electrical
More informationPR - PCB relay. 42 catalog 2002 e / the PR-PCB relay. By using best materials and because of the simple construction the highest failsecurity
PR - PCB relay the PR-PCB relay PCB-Relay from the PR family are small relays. The version has forced guided contacts, 2 normally open contacts, 2 normally closed contacts. In the industrial electronic
More informationMiniature Relays Series M25 Type M25-1 pole 16 A Monostable
Miniature Relays Series M25 Type M25-1 pole 16 A Miniature size mm PCB mounting 5 kv / 10 mm insulation Switching capacity 16 A / 250 General purpose, industrial electronics Sealed according IP 67 Low
More information1 Form A 8A/16A, Small Polarized Power Relays (latching type)
8A/16A, Small Polarized Power Relays (latching type) DW RELAYS (ADW1) New Low profile type (Inrush type) FEATURES 1. Low profile type available (h = 15.8 mm.622 inch) 2. Inrush type available (TV-8 UL/C-UL
More informationULTRA MINIATURE RELAY. FTR-B3 Series. 2 POLES - 2 A (Low Profile Signal Relay) FTR-K1 SERIES FEATURES
FTR-K1 SERIES ULTRA MINIATURE RELAY 2 POLES - 2 A (Low Profile Signal Relay) FTR-B3 Series FEATURES DPDT 2C Ultra miniature low profile relay with high heat resistant material Height: 5.45mm, Weight: 0.85g,
More informationGeneral Specifications
Series M2 Process Sealed Miniature Rockers Touch Tilt Rockers Toggles Slides Rotaries Programmable Illuminated P Pushbuttons Supplement Accessories Indicators Tactiles Keylocks eneral Specifications Electrical
More informationSquare D General Purpose Relays
Square D General Purpose Relays Class 850R miniature control relays 850RS4 standard 850RS24 low level 850RS34 hermetically sealed Catalog 204 Contents Class 850R miniature control relays bbspecifications....................................................
More informationPRODUCT SPECIFICATION
1.0 SCOPE DDR4 DIMM SOCKET This Product Specification covers the 0.85mm centerline gold plated DDR4 DIMM edge card connector for 1.40 ± 0.10 thick memory modules..0 PRODUCT DESCRIPTION.1 PRODUCT NAME AND
More informationSILENT POWER RELAY. FTR-H3 Series. 1 POLE - 78A/120A Inrush Current Type FTR-K1 SERIES NOT FOR NEW DESIGN FEATURES
FTR-K1 SERIES SILENT POWER RELAY 1 POLE - 78A/120A Inrush Current Type FTR-H3 Series FEATURES Pin compatible with widely used VS and FTR-H1 series power relays Silent relay with patented unique U-shape
More informationSPECIFICATION FOR APPROVAL
PART NO.: XMG-9771-AE51131-246 Xmultiple MARKETING GROUP R&D GROUP QA GROUP ISSUED BY CHECKED BY QA INSPECTION Gino De Xu Long CUSTOMER: SAMPLE Q TY: CUSTOMER CUSTOMER APPROVAL: APPROVAL CONCESSIONARY
More information2 POLES - 2 A (Low Profile Signal Relay) (b) Terminal type C : Through hole G : Surface mount S : Surface mount, space saving
FTR-K1 SERIES ULTRA MINIATURE RELAY 2 POLES - 2 A (Low Profile Signal Relay) FTR-B3 Series FEATURES DPDT 2C Ultra miniature low profile relay with high heat resistant material Height: 5.45mm, Weight: 0.85g,
More informationDistinctive Characteristics
Distinctive Characteristics Ultra-miniature size allows high density mounting, and extremely light weight of 0. gram makes these switches ideal for handheld equipment. Totally sealed body construction
More informationAUTOMOTIVE MICRO-ISO RELAY FEATURES
AUTOMOTIVE MICRO-ISO RELAY RELAYS..... FEATURES. Micro-ISO type terminals Small size: mm(l) mm(w) mm(h). inch(l). inch(l). inch(h) Wide line-up PC board and, Resistor and diode inside type. type is also
More informationFTR-K1 SERIES POWER RELAY 1 POLE - 25A
POWER RELAY 1 POLE - 25A Latching Relay FTR-K3L Series FTR-K1 SERIES FEATURES 1 pole, 25A, 1 form A 2 coils latching type High insulation (between coil and contacts) Insulation distance: clearance min.
More informationThe Best Relaytion. Cradle Relay Accessories Rev. B EC-JM ECOC: JM10 1. Aug. 04
The Best Relaytion Cradle Relay Accessories 108-98016 Rev. B EC-JM00-0009-03 ECOC: JM10 1. Aug. 04 Sockets with hand solder terminals Sockets with PCB terminals Approx. weight 3.5 g Approx. weight 4.5
More informationDistinctive Characteristics
Distinctive Characteristics Top or side actuation permits fl exible board design. Compact dimensions and low profile allow high density mounting and close stacking of PC boards. Crisp actuation positively
More information