PRODUCT PRESENTATION PROTECT D.1000 D.3000 APRIL 2012 DATA&IT, SBU C-UPS, PM/SR

Transcription

1 PRODUCT PRESENTATION PROTECT D.1000 D.3000 APRIL 2012 DATA&IT, SBU C-UPS, PM/SR

2 CONTENTS A CLASSIFICATION 3 B PRODUCT HIGHLIGHTS 8 C SUMMARY 33 2

3 A- CLASSIFICATION CLASSIFICATION ACC. TO -AEG S UPS PRODUCT PORTFOLIO -IT S APPLICATION ORIENTED USE - UPS PRODUCT NORM IEC

4 CLASSIFICATION ACC. TO AEG S UPS PRODUCT PORTFOLIO Compact UPS PROTECT HOME. / PROTECT A. 500 / 600 (HOME.) / 700 / 1000 / 1400 [VA] 1-phase Output VFD (PROTECT HOME.) / VI - technology PROTECT B. / PROTECT B.PRO 750 (+B.) / 1000 (+B.) / 1400 / 1800 / 2300 / 3000 [VA] 1-phase Output Line-Interactive / VI - technology PROTECT C.(S) / PROTECT C. R(S) 1000 / 2000 / 3000 (+R/+RS) / 6000 / [VA] 1-phase Output On-Line / VFI - technology All-round UPS PROTECT / 20 / 30 / 40 / 60 [kva] 1-phase Output On-Line / VFI - technology PROTECT /20/30/40/60/80/100/120 [kva] 3-phase Output On-Line / VFI - technology PROTECT /15/20/30/40/60/80 [kva] 3-phase Output On-Line / VFI - technology Industrial UPS PROTECT /20/30/40/60/80/100/120 [kva] 1-phase Output On-Line / VFI - technology Rectifier + PROTECT 8. INV 1 10/20/30/40/60 [kva] 1-phase Output On-Line / VFI - technology PROTECT /20/30/40/60/80/100/120 [kva] 3-phase Output On-Line / VFI - technology CLASSIFICATION Energy Efficiency Solutions PROTECT D / 1500 / 2000 / 3000 / 6000 / [VA] 1-phase Output On-Line / VFI - technology PROTECT 3.M /40/60/80/100/120 [kva] 3-phase Output On-Line modular / VFI - technology Rectifier + PROTECT 8. INV 3 25/40/60/80/100/120 [kva] 3-phase Output On-Line / VFI - technology PROTECT / / [VA] 1-phase Output On-Line / VFI - technology PROTECT BLUE. 250 / 500 / 750 / 1000 / 1250 [kva] 3-phase Output On-Line / VFI - technology PROTECT 8.33 high power 160 / 220 / 300 / 400 / 500 [kva] 3-phase Output On-Line / VFI - technology PROTECT 1.M scalable: 4000 up to [VA] 1-phase Output On-Line modular / VFI - technology PROTECT STS 100 / 200 / 400 / 600 / 800 / 1200 [A] 3-pole ( 4-pole on request ) Static Transfer Switch Rectifier + Transokraft 30 / 50 / 80 / 120 / 170 [kva] 3-phase Output On-Line / VFI - technology 4

5 CLASSIFICATION ACC. TO AEG S COMPACT- UPS PRODUCT PORTFOLIO PROTECT HOME. PROTECT A. PROTECT B. PROTECT B. PRO PROTECT C. PROTECT C.R PROTECT D. PROTECT 1. PROTECT 1.M Power [ kva ] 0.5 Explanations : 1 ph ~ / 1 ph ~ 3 ph ~ / 1 ph ~ Compact UPS PROTECT Home. / PROTECT A. 500 / 600 (HOME.) / 700 / 1000 / 1400 [VA] 1-phase Output VFD (PROTECT HOME.) / VI - technology PROTECT B. / PROTECT B.PRO 750 (+B.) / 1000 (+B.) / 1400 / 1800 / 2300 / 3000 [VA] 1-phase Output Line-Interactive / VI - technology PROTECT C.(S) / PROTECT C.R(S) 1000 / 2000 / 3000 (+R/+RS) / 6000 / [VA] 1-phase Output On-Line / VFI - technology PROTECT D / 1500 / 2000 / 3000 / 6000 / [VA] 1-phase Output On-Line / VFI - technology PROTECT / / [VA] 1-phase Output On-Line / VFI - technology PROTECT 1.M scalable: 4000 up to [VA] 1-phase Output On-Line modular / VFI - technology CLASSIFICATION Energy Efficiency Solutions VFD technology ( offline ) VI technology ( line-interactive ) VFI technology ( double-conversion ) 5

6 CLASSIFICATION ACC. TO IT S APPLICATION ORIENTED USE Compact UPS Home, SoHo Office, SoHo, IT segment PROTECT HOME. 600 VA Comprehensive protection for all Multimedia equipment. PROTECT B./ B.PRO 750 to 3000 VA Rack or tower for server and network components with sinusoidal output. PROTECT A. 500 to 1400 VA Protects PCs, workstations and phone systems. PROTECT C to VA Rack or tower for sensitive networks, small computer centres, Intranet and Internet servers. PROTECT D to VA Rack or tower for sensitive networks, small computer centres, Intranet and Internet servers. PROTECT to VA For small data centres, protection of cash till systems, building technology. CLASSIFICATION Energy Efficiency Solutions Medium High Power UPS Data Centre Industry PROTECT to 20 kva For small data centres, protection of cash till systems, building technology. PROTECT 1.M 4 to 24 kva Scaleable, modular high-performance UPS-system for the IT sector. PROTECT to 80 kva Host computers, file servers, Workstations and computer centres as well as complex networks in industrial companies. PROTECT 3.M to 120 kva (scalelable) Computer centres, Internet nodes, banks & insurance companies. PROTECT BLUE. 250 to 1000 kva Building control systems, data centres, internet nodes, banks, suitable for all critical applications in this spectrum. 6

7 CLASSIFICATION ACC. TO UPS PRODUCT NORM IEC PROTECT D Voltage Phenomenon Outage - blackouts Sags / brownouts Dynamic overvoltage Undervoltage Overvoltage Transients (Surge) Frequency variations Voltage distortion (Burst) Voltage harmonics Time e.g. IEC UPS Arrester solution solution > 10 ms continuous continuous < 4 ms sporadic periodic continuous VFD Voltage + Frequency Dependent VI Voltage Independent VFI Voltage + Frequency Independent Classification 3 Offline Classification 2 Line-Interactive Classification 1 (true) Online real Double- Conversion Limited protection via UPS (extended protection recommended (10.)) see as well 10. CLASSIFICATION Energy Efficiency Solutions 10. Lightning sporadic Surge- and Overvoltage protection (IEC ) 7

8 B- PRODUCT HIGHLIGHTS

9 GENERAL PRODUCT OVERVIEW 1000 VA / 900 W 1500 VA / 1350 W 2000 VA / 1800 W 3000 VA / 2700 W 6000 VA / 5400 W More powerful (pf = 0.9 lag.) Less footprint (2U incl. battery) Extended user oriented communication Hot-swappable and extendable battery system Innovative locking mechanism for output sockets VA / 9000 W Easiest & most flexible operation thanks to LCD display refer to separate product presentation PRODUCT HIGHLIGHTS PERFORMANCE 9

10 PERFORMANCE MORE POWERFUL SERIES POWER RATING AT PF=0.9LAG. FOR ALL PROTECT D. MODELS 1000 VA / 900 W 1500 VA / 1350 W 2000 VA / 1800 W 3000 VA / 2700 W 6000 VA / 5400 W VA / 9000 W more power for modern SPS loads with PFC correction Narrow - graded power steps to fit exactly the power demand PRODUCT HIGHLIGHTS PERFORMANCE PROTECT D VA / 2700W 3000VA / 2100W 10

11 PERFORMANCE POWER BANDWIDTH ABLE TO COVER THE COMPLETE POWER FACTOR SPECTRUM able to handle pure lagging load full power able to handle pure leading load PRODUCT HIGHLIGHTS PERFORMANCE lagging load (pf =... lag.) leading load (pf=... cap.) active load (pf =1) 11

12 PERFORMANCE POWER BANDWITH ABLE TO OPERATE 100% NON-LINEAR LOAD Input voltage (mains) Input current (mains) UPS output voltage Current (UPS load) PRODUCT HIGHLIGHTS PERFORMANCE Cleaner power ( 0.99 THDi 8% ) Less power pollution Suitable for all kind of loads 12

13 EFFICIENCY

14 PERFORMANCE EFFICIENCY SHORT-TERM AMORTIZATION LESS COOLING 2000 VA / 1400 W 85% double-conversion ( VFI ) mode 1500 VA / 1350 W or 2000VA/1800W 89% 584 kwh less losses / Saving per year: ~ 117 * PRODUCT HIGHLIGHTS PERFORMANCE Consumption at 90% load (1260W) Losses at 8760h/year = 1948 kwh Consumption at 1260W Losses = 1364 kwh 909 kwh less losses Saving/year: ~182 * 98% ECO+ at the weekend * calculation basics EUR 0.20 per kwh 14

15 FOOTPRINT LESS RACK SPACE REQUIRED 3000VA / 2100W 5 min. at full load (external battery) 2U PROTECT D VA / 2700W 2U height for all PROTECT D. models including battery system High performance batteries (more powerful at high output level) PRODUCT HIGHLIGHTS FOOTPRINT PROTECT D min. at 2100 W (internal battery system) thanks to electronics improvement even at lower DC voltage (2 blocks less) 15

16 MORE EASY TO OPERATE LCD Display for UPS status, Control,, Measurements, Event Log, Identification Real time clock (synchronized automatically) Data logger for 127 events Display operation lockable; settings password protected Graphical LCD display ( 128 x 64 pixel ) Multilingual > 5 languages ( EN / DE / FR / ES / RU ) 2.8 " Viewing area: x mm PRODUCT HIGHLIGHTS LCD DISPLAY 16

17 LCD DISPLAY PROTECT D. SERIES MENU TREE COMPLETELY Welcome screen AEG UPS On UPS Off Confirmation Status screen with : - Icon to signalize state - Input / Output voltage [V] - Input / Output frequency [Hz] - Autonomy time [min.] - Battery capacity [%] - Load level [%] M a i n m e n u Output power [W] Event log Measurements Control Identification Notice / Alarm screen (current event) - UPS On Bypass - On Manual Bypass - UPS System Normal - UPS On Battery - In Economical Mode (ECO) - In High Efficiency Mode (ECO+) - UPS Off - ABM State Charging - ABM State Floating - Clock Set Done - Battery Disconnected - Low Battery Warning - Battery Test Failed - Service Battery - Output Overload - Utility Not Present -PUE [%] - Output [W] & [VA] - Output [A] & [pf] - Output [V] & [Hz] - Input [V] & [Hz] - Battery [V] % [%] - DC Bus [V] - Ext. batt. packs - kwh since reset - Bypass Not Available - Input AC Under/OverVoltage - Input Under/OverFrequency - Inverter Fault - Rectifier Fault - Charger Failure - Output Short Circuit - Heatsink Over Temperature - Fan Failure - Go to bypass - Battery test - Reset error state - Load segments - Type / Model - Part number - Serial number - UPS Firmware - Change language - User password - Audible alarms - Set date and time - Relay onfiguration - Control commands from serial port - Output voltage - Output frequency - Load alarm level - Power strategy - Automatic start delay - Automatic on battery shutdown - Start w/o mains - Battery saving mode - Site wiring fault alarm - Charger output voltage - Battery charge % to restart - Automatic battery tests - Periodic battery test - Ambient temperature warning - REPO operation - Reset cumulative consumption kwh - Battery limit time - Auto reboot - Auto bypass - Start w/o battery - Clear event log - LCD contrast - Restore factory setting PRODUCT INFO LCD DISPLAY ( I ) 17

18 LCD DISPLAY STATUS SCREEN OVERVIEW, E.G. PROTECT D.1500 AT NORMAL ( DOUBLE-CONVERSION) OPERATION Input data: - UPS input voltage [V] - UPS input frequency [Hz] Icon as advice for pushbutton to turn UPS On/Off UPS status ( different coloured LEDs (red/ yellow/ green)) - Normal operation - Eco/ Eco+ operation - Battery operation - Bypass operation - Red LED signalizing UPS error PRODUCT INFO LCD DISPLAY ( II ) - Icon for UPS state - Autonomy time [min.] (depending on load level) - Bargraph for battery capacity - Current UPS load [%] - UPS load as bargraph Push-buttons for menu navigation Output data (load): - UPS output voltage - UPS output frequency - Current UPS load [W] (resistive power) 18

19 PRODUCT INFO LCD DISPLAY ( III ) 19 LCD DISPLAY MAIN MENU

20 LCD DISPLAY ICONS FOR STATUS UPS normal high efficiency on battery ECO+ mode on bypass converter on stand-by overload PRODUCT INFO LCD DISPLAY ( IV ) battery check no/ bad battery alarm active critical fault PROTECT D.1500 (normal operation) 20

21 LCD DISPLAY STATUS SCREEN, E.G. UPS in converter mode UPS proceeding a battery check PRODUCT INFO LCD DISPLAY ( V ) UPS in economical (ECO) mode UPS proceeds battery check sucessfully 21

22 LCD DISPLAY SETTINGS ( I ) Change language User password Audible alarms Set date and time Relay configuration Change language User password Audible alarms Set date and time Relay configuration Change language User password Audible alarms Set date and time Relay configuration Change language User password Audible alarms Set date and time Relay configuration User password Audible alarms Set date and time Relay configuration Output voltage Audible alarms Set date and time Relay configuration Output voltage Output frequency PRODUCT INFO LCD DISPLAY ( VI ) Change language User password Audible alarms Set date and time Relay configuration Set date and time Relay configuration Output voltage Output frequency (Over)Load alarm level 22

23 LCD DISPLAY SETTINGS ( II ) Relay configuration Output voltage Output frequency (Over)Load alarm level Power strategy Output voltage Output frequency (Over)Load alarm level Power strategy Automatic start delay Automatic start delay Automatic on battery shutdown Start w/o mains Battery saving mode Automatic on battery shutdown Start w/o mains Battery saving mode Site wiring fault alarm Battery charge % to restart Charger output voltage Automatic battery support test Charger output voltage Automatic battery support test Periodic battery test Battery limit time Periodic battery test Battery limit time REPO operation Ambient temperature high alarm Battery limit time REPO operation Ambient temperature high alarm Auto reboot Auto reboot Reset cumulative consumption kwh Auto bypass Start w/o battery Reset cumulative consumption kwh Auto bypass Start w/o battery Clear event log PRODUCT INFO LCD DISPLAY ( VII ) (Over)Load alarm level Start w/o mains Charger output voltage Ambient temperature Auto bypass Power strategy Battery saving mode Automatic high alarm Start w/o battery Automatic start delay Automatic on battery shutdown Site wiring fault alarm Battery charge % to restart battery support test Periodic battery test Battery limit time Auto reboot Reset cumulative consumption kwh Clear event log LCD contrast Restore factory setting Power strategy Battery saving mode Automatic Auto reboot Auto bypass Automatic start delay Site wiring fault alarm battery support test Reset cumulative Start w/o battery Automatic on battery shutdown Battery charge % to restart Periodic battery test Battery limit time consumption kwh Auto bypass Clear event log LCD contrast Start w/o mains Charger output voltage REPO operation Start w/o battery Restore factory setting 23

24 REAR VIEW PROTECT D.3000 CONNECTIONS PROTECT D load segments separately controlled 16A IEC socket for full output power speed controlled fan plus active watchdog automatic locking devices free programmable relay & EPO dual-monitoring (RS232&SNMP) PRODUCT HIGHLIGHTS REAR VIEW (CONNECTIONS) SNMP card optional 24

25 REAR VIEW PROTECT D.1000 / D.2000 CONNECTIONS PROTECT D.1000 D.1500 similar PRODUCT INFO REAR VIEW ( II ) PROTECT D

26 PRODUCT INFO AUTONOMY TIME DATA PROTECT D. BP BATTERY PACKS 26

27 BATTERY ACCESS BY THE FRONT SIDE Front panel incl. LCD display remains to the UPS unit ( hot-swappable process ) Easy handling, e.g. flip-over front cover Fixing the front panel by side-on movement PRODUCT HIGHLIGHT BATTERY ACCESS Connection for internal battery with fixed polarity ( + / ) Connector for external battery with fixed polarity ( + / / PE ) Automatic detection of external battery packs 27

28 PRODUCT INFO BATTERY CONNECTION FIXED BATTERY CONNECTION INTERNALLY & EXTERNALLY 28

29 PRODUCT HIGHLIGHT BATTERY REPLACEMENT EASY BATTERY REPLACEMENT BY FRONT ACCESS 29

30 INTELLIGENT BATTERY MANAGEMENT U batt CHARGE MODE FLOAT MODE t charge 1.5 x t charge 24h 24h external charger off automatic battery test REST MODE OR FLOAT MODE IN CONSTANT CHARGING 28days time Charging cycle modes: - Charge mode (constant current) - Float mode (constant voltage) - Rest mode (battery in stand-by) Additional features: - Float mode voltage adjustable - temperature compensation - automatic battery pack detection PRODUCT HIGHLIGHT BATTERY MANAGEMENT 30

31 SHIPMENT PROTECT D.1000 ( PROTECT D.1500 / D.2000 SIMILAR) PRODUCT INFO SHIPMENT ( I ) PROTECT D mm 31 31

32 PRODUCT INFO SHIPMENT ( II ) 32 SHIPMENT PROTECT D x load cords 10A 1 x load cord 16A

33 C- SUMMARY

34 COMPETITIVENESS CONCLUSION More real power (pf of 0.9 lagging, suitable for all kind of critical loads) Compact size, modern solid look (aluminium front, integrated battery system, graphical display) Highest efficiency up to 98% (different operation modes available) Frequency converter mode available Strong battery charger with intelligent battery management ( three stage technology; adjustable; incl. temperature compensation ) Easy battery extension & replacement (connections all accessible by the front) Highest flexibility acc. to communication (dual- monitoring) and adjustments (settings accessible by the LCD Display) CONCLUSION 34