Voyager Focus UC. User Guide

Transcription

1 Voyager Focus UC User Guide

2 Contents Overview 3 Headset 3 Charge stand 4 USB Bluetooth adapter 4 Connect and pair 5 Connect to PC 5 Configure USB adapter 5 Pair to mobile device 5 Pair USB adapter again 6 Fit and charge 7 Wear on the right or left 7 Charge your headset 7 Check headset battery status 7 Load software 8 The basics 9 Make/Take/End Calls 9 Mute/unmute 10 Mute on reminder* 10 Hear your surroundings 10 Volume 10 Play or pause music 10 Track selection 10 Use sensors 10 ANC 11 More Features 12 DeepSleep Mode 12 Answer calls from a second device 12 What's in the box 13 Accessories 13 Troubleshoot 14 Support 15 2

3 Overview Headset ([ ]) ANC Volume up/down Track backward* Play/pause music* Track forward* ANC Active noise cancelling Charge port Active call = mute/unmute Idle = hear your surroundings Headset LEDs for pairing, battery status, online indicator Call button ([ ]) Power button Bluetooth pair button NOTE *Functionality varies by application. Does not function with web-based apps. 3

4 Charge stand USB Bluetooth adapter USB LEDs Red and blue flashes Solid Blue Blue flashes Solid red Purple flashes What they mean Pairing Pairing successful; Connected On a call Mute active Streaming music/media from computer 4

5 Connect and pair Connect to PC Your Bluetooth USB adapter comes pre-paired to your headset. 1 Insert the Bluetooth USB adapter into your laptop or PC. 2 Headset call control Some softphones require the installation of Plantronics Hub for Windows and Mac (plantronics.com/software) to enable headset control (answer/end and mute) functionality. NOTE Plantronics Hub software also allows you to customize your headset's behavior through advanced settings and options. Configure USB adapter Your Bluetooth USB adapter comes ready to take calls. If you want to listen to music, you will need to configure your USB adapter. 1 Windows 1 To configure your USB adapter to play music, go to Start menu > Control Panel > Sound > Playback tab. Select Plantronics BT600, right-click, select Select as Default Device and click OK. 2 To pause music when you place or receive calls, go to Start menu > Control Panel > Sound > Communications tab and select the desired parameter. 2 Mac 3 To configure the Bluetooth USB adapter, go to Apple menu > System Preferences > Sound. On both the Input and Output tabs, select Plantronics BT600. Pair to mobile device 1 To put your headset in pair mode, press and hold the power button towards the Bluetooth icon until you hear "pairing" and the headset LEDs flash red and blue. 2 Activate Bluetooth on your phone and set it to search for new devices. iphone Settings > Bluetooth > On* Android Settings > Bluetooth: On > Scan for devices* NOTE *Menus may vary by device. 3 Select PLT_Focus. If necessary, enter four zeros (0000) for the passcode or accept the connection. 5

6 Once successfully paired, you hear pairing successful and the headset LEDs stop flashing. NOTE Your headset can pair with up to 8 devices but only maintain 2 connections simultaneously; this includes the Bluetooth USB adapter. Pair USB adapter again Although your Bluetooth USB adapter comes pre-paired to your headset, you may need to pair them again. 1 Insert the Bluetooth USB adapter into your laptop or computer and wait for your computer to recognize it. 2 Put your headset in pair mode by pressing and holding the power button towards the Bluetooth icon until you hear "pairing" and the headset LEDs flash red and blue. 3 Put your Bluetooth USB adapter into pairing mode by pressing and holding the pair button with a pen or paperclip until the Bluetooth USB adapter flashes red and blue. Pairing is successful when you hear "pairing successful" and the Bluetooth USB adapter LED is solid blue. 6

7 Fit and charge Wear on the right or left To position the microphone on the right or left side, rotate the microphone boom up and over. Adjust the boom so it points to the corner of your mouth. TIP Your headset senses when you change the microphone boom from one side to the other and syncs the audio and controls specific to each side. Charge your headset IMPORTANT Before using, charge the headset fully to reset the accuracy of the talk time prompts. Charge your headset with the charge stand or the micro USB cable. The headset LEDs flash when charging. It takes up to 2 hours to fully charge your headset. The LEDs turn off once charging is complete. Charge stand Micro USB cable Headset LEDs Battery status 4 5 blue blinks Battery high 2 3 blue blinks Battery medium 1 red blink Battery low flashing red Battery critical; Recharge headset Check headset battery status There are several ways to check your headset battery status. 1 Wearing the headset, tap the Call button and listen to the voice alert (when connected to smartphone only). 2 When not wearing the headset, tap any button and observe the headset LEDs. 3 Place the headset in the charge cradle and observe the headset LEDs. 7

8 Load software Some softphones require the installation of Plantronics Hub for Windows and Mac to enable headset control (answer/end and mute) functionality. 1 Install Plantronics Hub for Windows and Mac onto your computer by visiting plantronics.com/software. 2 Manage your headset settings with your computer or mobile device with Plantronics Hub for Windows and Mac or Plantronics Hub for ios and Android, respectively (plantronics.com/software). Plantronics Hub ios and Android Windows and Mac Call control for softphones Change headset language Update firmware X X X Turn features on/off X X View user guide X Battery meter X X 8

9 The basics ([ ]) ANC Volume up/down Track backward* Play/pause music* Track forward* ANC Active noise cancelling Charge port Active call = mute/unmute Idle = hear your surroundings Headset LEDs for pairing, battery status, online indicator Call button ([ ]) Power button Bluetooth pair button NOTE *Functionality varies by application. Does not function with web-based apps. Make/Take/End Calls Answer or end a call Tap the Call button. Call back last call (smartphone) To dial your last number you dialed, double-tap the Call button. 9

10 Voice dial (smartphone) If your smartphone has a voice-enabled assistant, press and hold the Call button for 2 seconds and wait for the phone prompt and then tell the phone to dial the number of a stored contact. Mute/unmute Mute on reminder* Hear your surroundings While on an active call, choose: Tap the red Mute button Take off/put on your headset while on an active call (requires active smart sensors) * Plantronics Hub for Windows and Mac required (plantronics.com/software) If you have muted an active call and you start to speak, then a desktop notification reminds you that you are on mute. You can add a voice prompt notification by managing your mute features with Plantronics Hub for Windows and Mac. While not on a call, tap the red Mute button to hear your surroundings. Use the volume wheel to control the volume of your surroundings, if desired. Volume Rotate the volume wheel forward (+) or backward ( ) to control the volume. Play or pause music Track selection Use sensors Choose: Put on/take off the headset (requires active smart sensors) Tap the Play/pause button NOTE Functionality varies by application. Does not function with web-based apps. Tap the Forward button or Back button to control the track selection. NOTE Functionality varies by application. Does not function with web-based apps. Smart sensors respond when you put on or take off your headphones. With active sensors putting on the headset will: taking off the headset will: Call answer the call mute the headset Music/media resume music/media (if playing previous to taking off)* pause music/media (if playing)* Mute unmute if on an active call mute if on an active call NOTE *Functionality varies by application. Does not function with web-based apps. Reset sensors You may need to reset the sensors if they are not working as expected. There are two ways to reset the headset sensors. Choose: Charge your headset on the charge stand for 10 seconds Press and hold both the Mute and Play/pause buttons for more than 4 seconds until the LEDs flash purple twice, being careful to not touch the earcup padding or allow it to come in contact with surfaces Disable sensors You can disable your headset smart sensors several ways: Manage sensors through Plantronics Hub software 10

11 Hold both the Mute and Call buttons for more than 4 seconds until the LED flashes purple then red. Repeat to reactivate; the LED flashes purple then blue. NOTE Sensors cannot be disabled while streaming audio. ANC Active Noise Cancelling (ANC) reduces unwanted noise. Your headset ships with ANC on. To turn ANC off, slide the stitch away from "ANC." 11

12 More Features DeepSleep Mode If you leave your headphones powered on but out of range of your paired phone for more than 7 days, your headset conserves its battery power by entering into DeepSleep mode. Once back in range with your phone, press the Call control button to exit DeepSleep mode. Answer calls from a second device It's easy to answer calls from two devices (including softphone). When on a call, you hear a ringtone notification of the incoming call from the second paired device. To answer a second call from the other device, first tap the Call button to end the current call and tap the Call button again to answer the new call. If you choose to not answer the second call, it will go to voic . 12

13 What's in the box Headset Base Bluetooth USB Adapter Carrying case Micro USB cable Accessories Sold separately at plantronics.com/accessories. Wall charger 13

14 Troubleshoot The headset sensors are not working as expected. A call is not automatically answered when I put on my headset. If your headset sensors are not working as expected, you may need to reset the sensors. See Reset sensors. Mute/unmute is not working when I take on/off my headset during a call. During a call, mute unexpectedly turns on. During a call, nobody can hear me. Configure the headset as the recording/output default device. For Windows, go to Start menu > Control Panel > Sound > Recording tab. Select Plantronics BT600, right-click, select Select as Default Device and click OK. For Mac, go to Apple menu > System Preferences > Sound > Output tab and select Plantronics BT600. During a call, I can't hear anybody. Configure the headset as the playback/input default device. For Windows, go to Start menu > Control Panel > Sound > Playback tab. Select Plantronics BT600, right-click, select Select as Default Device and click OK. For Mac, go to Apple menu > System Preferences > Sound > Input tab and select Plantronics BT600. Music is not coming through my headset. The headset talk time is not accurate. When I play music and a call comes in, the music is too loud or doesn't pause. When I use my headset with a softphone, the headset call control and mute buttons don't work. To configure your USB adapter to play music, see Configure USB adapter. Charge the headset fully to reset the accuracy of the talk time prompts. To configure your USB adapter to play music, see Configure USB adapter. Some softphones require the installation of Plantronics Hub for Windows and Mac to enable headset control (answer/end and mute) functionality. See Load software. 14

15 Support NEED MORE HELP? plantronics.com/support Plantronics, Inc. 345 Encinal Street Santa Cruz, CA United States Plantronics BV South Point Building C Scorpius LR Hoofddorp, Netherlands 2015 Plantronics, Inc. Plantronics and Simply Smarter Communications are trademarks of Plantronics, Inc., registered in the US and other countries. Bluetooth is a registered trademark of Bluetooth SIG, Inc. and any use by Plantronics is under license. All other trademarks are the property of their respective owners. Patents pending. XXXXXX-06 (04.15)