EXAMAX HIGH SPEED BACKPLANE CONNECTOR SYSTEM Innovative pinless connector system delivering superior electrical performance at speeds 25 to 56Gb/s
|
|
|
- Sherilyn Hodge
- 6 years ago
- Views:
Transcription
1 EXAMAX HIGH SPEED BACKPLANE Innovative pinless connector system delivering superior electrical performance at speeds 5 to 5Gb/s SUPPORTS MANY INDUSTRY STANDARD SPECIFICATIONS; MIGRATION PATH TO HIGHER BANDWIDTH APPLICATIONS ExaMAX backplane connector system meets industry specifications requiring higher bandwidth applications from 5Gb/s to 5Gb/s. The optimized connector design delivers superior signal integrity performance resulting in low crosstalk noise and low insertion loss while minimizing channel performance variation for every differential pair. Each signal wafer incorporates an innovative one-piece, embossed ground structure to improve crosstalk performance through 5Gb/s. The simple, functional design contributes to a very cost-effective solution. The innovative beam-on-beam contact interface minimizes residual stub for improved signal integrity performance while providing exceptionally low mating forces ExaMAX optimizes design flexibility by integrating high speed differential signals, low speed signals and power in one connector ExaMAX product family is offered in industry standard packaging options including traditional backplane, coplanar board, orthogonal midplane and orthogonal direct mate, mezzanine and cable to board FEATURES Data rates scalable from 5Gb/s to 5Gb/s to support system upgrades without costly redesigns 9Ω nominal impedance Scalable performance TARGET MARKETS BENEFITS Meets Industry specifications such as Optical Internetworking Forum (OIC), PCI Express, SATA, Fiber Channel, Infiniband, Ethernet, SAS, IBTA and IEEE Minimizes impedance discontinuities Backwards mating and footprint compatible with ExaMAX VS Unique beam-on-beam interface and skew equalized leadframes Provides low crosstalk while eliminating insertion loss resonances Reduces mating force up to 5% compared to traditional blade and beam designs Hermaphroditic mating interface protects mating beams Durable, reliable mating interface design eliminates crushed pins Modular, hard metric connector block design mm pitch for high density application Zero skew Optimizes PCB routing mm pitch enables quad routing and lower PCB cost Additional signal pin per column Integrates high and low speed signals in the same connector High speed signal PCB hole: 0.mm (finished hole) Ground pin PCB hole: 0.5mm (finished hole) Optimizes electrical performance and aspect ratio 1 to 9 differential pair node connector Wide product range for various packaging options Integrated guide design Improves mating performance using minimal board space
2 TECHNICAL INFORMATION SIGNAL INTEGRITY PERFORMANCE Insertion Loss (db) De-Embedded ExaMAX apr mm RAR VH - Insertion Loss -1 BC -1 EF HI -1 KL CD FG -18 IJ LM Frequency (GHz) pr ExaMAX - Power-Summed Crosstalk Pair NO (Hdr Side) APPROVALS AND CERTIFICATIONS Telcordia GR-117-CORE Central Office qualification passed UL E90 ELECTRICAL PERFORMANCE Contact Resistance: 0mV max., 100mA current Insulation Resistance: 1000MΩ at 500VDC Dielectric Withstanding Voltage: 500VDC Current Rating (with 0 C T-rise above ambient) Signal contact: 0.5A/Contact (both signal and ground contacts can carry current) ENVIRONMENTAL Operating Temperature: -55 C to +85 C ICN (mv, RMS) -0 MATERIAL -50 NEXT FEXT DDIL Frequency (GHz) Integrated Cross-Talk Noise SARX IL at 1.9 GHz (db) Channel length = 0 inches PCB material is Nelco 000-1SI VSP Contacts: High performance Copper Alloy Plating(s): Performance-based plating at separable interface (Telcordia GR-117-CORE) Tin over Nickel on press-fit tails Housings: High Performance Thermoplastic, UL9-V0 MECHANICAL PERFORMANCE Long mating wipe of > mm X and Y capture a generous 1.1mm Mating Force: 0.8N max. per contact Unmating Force: 0.10N min. per contact Average press-fit Insertion Force: 1N max. per contact SPECIFICATIONS Product Specification: GS Application Specification: GS-0-01 INDUSTRY SPECIFICATIONS Industry Specifications PCI Express (PCIe) Gen 1/// Serial Attached SCSI (SAS) 1.1/.1/.0/.0 SATA Revision 1.x/.x/.x Fibre Channel (FC) Gen1/ Gen/Gen/Gen/Gen5 InfiniBand (IB) SDR/DDR/QDR/FDR/EDR Ethernet 1Gbe/10Gbe/0Gbe/ 100Gbe/5Gbe TARGET MARKETS/APPLICATIONS Hubs Switches Router Optical Transport Wireless Infrastructure Server External Storage System Supercomputer Industrial & Instrumentation Test Equipment Emulation Equipment Speed Performance.5Gb/s to 1Gb/s Gb/s to Gb/s 1.5Gb/s to Gb/s 1.05Gb/s to 1.05Gb/s.5Gb/s to 5Gb/s 1.5Gb/s to Gb/s
3 EXAMAX TRADITIONAL MOTHER-DAUGHTER BOARD NO GUIDE No Guide Pin Vertical Header (VH) Right Angle Receptable (RAR) LF LF LF LF LF LF LF LF LF LF LF LF LF LF LF LF LF LF LF LF LF LF LF LF LF LF LF LF Vertical Header LEFT GUIDE Left Guide Pin Vertical Header (VH) Right Angle Receptable (RAR) JLF JLF JLF JLF JLF JLF JLF JLF JLF JLF JLF JLF JLF JLF JLF JLF JLF JLF JLF JLF JLF JLF JLF JLF JLF JLF JLF JLF Vertical Header
4 EXAMAX TRADITIONAL MOTHER-DAUGHTER BOARD RIGHT GUIDE Right Guide Pin Vertical Header (VH) Right Angle Receptable (RAR) JLF JLF JLF JLF JLF JLF JLF JLF JLF JLF JLF JLF JLF JLF JLF JLF JLF JLF JLF JLF JLF JLF JLF JLF JLF JLF JLF JLF EXAMAX COPLANAR Vertical Header Standard Coplanar Inverse Coplanar NO GUIDE No Guide Pin Right Angle Header (RAH) (RAR) LF LF LF LF LF LF LF LF LF LF LF LF LF LF LF LF LF LF LF LF LF LF LF LF LF LF LF LF Right Angle Header
5 EXAMAX COPLANAR LEFT GUIDE Standard Coplanar Inverse Coplanar Left Guide Pin Right Angle Header (RAH) (RAR) JLF JLF JLF JLF JLF JLF JLF JLF JLF JLF JLF JLF JLF JLF JLF JLF JLF JLF JLF JLF JLF JLF JLF JLF JLF JLF JLF JLF Right Angle Header RIGHT GUIDE Right Guide Pin Right Angle Header (RAH) Right Angle Receptable (RAR) JLF JLF JLF JLF JLF JLF JLF JLF JLF JLF JLF JLF JLF JLF JLF JLF JLF JLF JLF JLF JLF JLF JLF JLF JLF JLF JLF JLF Right Angle Header
6 TOOLING INFORMATION Insertion Tool Vertical and Right Angle Header Removal Tool Removal Tool APPLICATION TOOLS FOR RIGHT ANGLE RECEPTACLE WITH mm COLUMN PITCH Insertion Tool Removal Tool Flat Rock, No Tool Flat Rock, No Tool Flat Rock, No Tool Flat Rock, No Tool APPLICATION TOOLS FOR VERTICAL HEADER WITH mm COLUMN PITCH Insertion Tool Removal Tool
7 APPLICATION TOOLS FOR RIGHT ANGLE HEADER WITH mm COLUMN PITCH Insertion Tool Removal Tool Flat Rock, No Tool Flat Rock, No Tool Flat Rock, No Tool Flat Rock, No Tool EXAMAX PROTECTIVE CAPS Header Protective Cap Receptacle Protective Cap Protective Caps Header Receptacle BPLEXAMAX9051EA
ExaMAX High Speed Backplane Connector System Innovative pinless connector system delivering superior electrical performance at speeds 25Gb/s to 56Gb/s
Innovative pinless connector system delivering superior electrical performance at speeds 5Gb/s to 5Gb/s SUPPORTS MANY INDUSTRY STANDARD SPECIFICATIONS; MIGRATION PATH TO HIGHER BANDWIDTH APPLICATIONS ExaMAX
AirMax POWER CONNECTOR MODULES Part of the AirMax Connector Family
Part of the AirMax Connector Family HIGH PERFORMING AND DURABLE CONNECTORS Hard Metric high power connectors are a perfect complement to AFCI s ExaMAX, AirMax, ZipLine and Millipacs signal connectors.
AirMax VSe High Speed Backplane Connector System
AirMax VSe High Speed Backplane Connector System July 2012 FCI Customer Presentation For External Use Where will AirMax VSe connectors be used & Why? More bandwidth density is being demanded from equipment
Millipacs 2mm Hard Metric Connector Selector Guide
Millipacs 2mm Hard Metric Connector Selector Guide Millipacs product family offers 2mm modular Boardto-Board and Cable-to-Board backplane connector solutions. Millipacs product range include low speed
Bergstak 0.80mm Pitch Product Presentation
Bergstak 0.80mm Pitch Product Presentation Basics Portfolio Agenda 1. Value Proposition 2. Product Overview 3. Product Specifications 4. Features & Benefits 5. Markets & Applications 6. Marcomm Collaterals
STRADA WHISPER. Backplane Connector DATA COMMUNICATIONS /// STRADA WHISPER BACKPLANE CONNECTOR
STRADA WHISPER Backplane Connector INTRODUCING STRADA Whisper Backplane Connector Blinding Speeds The STRADA Whisper backplane family was designed with your end customer s need for high-performing, high-bandwidth
Product Specification. Mezza-pede SMT Connector Low Profile 1.0mm Pitch
Mezza-pede SMT Connector Low Profile 1.0mm Pitch Rev. 1 December 7, 2016 1.0 Scope This product specification applies to 1.0mm pitch Mezza-pede SMT Connectors, designed for the mating and unmating of a
Amphenol Amphenol Taiwan Corporation Sheet 1 of 9
Amphenol Amphenol Taiwan Corporation Sheet 1 of 9 Title: Part Number: Description: MINI SAS Connectors Product Specification G40 Series 0.80mm Pitch, Cable End and Board Mount Revisions Control Rev. ECN
Xmultiple Technology SFP Products Information
Xmultiple Technology SFP Products Information SFP Products Fiber Channel InfiniBand Ethernet SFP Product Types Optic Modules SFP System Copper HSSDC2 Module HSSDC2 Cable Assemblies PT Connectors SFP History
DUBOX SHUNTS BOARD/WIRE-TO-BOARD CONNECTORS FEATURES & BENEFITS. Dual-beam contacts for added reliability
BOARD/WIRE-TO-BOARD CONNECTORS DUBOX SHUNTS FEATURES & BENEFITS Dual-beam contacts for added reliability Slotted cutout in low profile housing simplifies electrical testing Side-by-side and end-to-end
HCI Power Connector System
1 of 28 C Section TABLE OF CONTENTS page no. 1. OBJECTIVE... 1 2. SCOPE... 2 3. DRAWINGS AND APPLICABLE DOCUMENTS... 4 4. GENERAL CUSTOMER INFORMATION... 4 4.1 PRODUCT APPLICATION... 4 4.2 COMPATIBILITY...
TCA connectors. ept GmbH & Co. KG I Phone +49 (0) 88 61/ I Fax +49 (0) 88 61/55 07 I I
10 ept GmbH & Co. KG I Phone +49 (0) 88 61/25 01 0 I Fax +49 (0) 88 61/55 07 I E-mail sales@ept.de I www.ept.de 11 Definitions AdvancedTCA /MicroTCA To give consideration to increasing data traffic and
zsfp+ (SFP28) 28 GBPS PLUGGABLE I/O INTERCONNECT
zsfp+ (SFP28) 28 GBPS PLUGGABLE I/O INTERCONNECT The zsfp+ interconnect is currently one of the fastest single-channel I/O connectors on the market today, transferring data at 28 Gbps with possible expansion
SPECIFICATION AND PERFORMANCE CHARACTERISTICS OF DVI MALE AND FEMALE CONNECTOR SERIES
SPECIFICATION AND PERFORMANCE CHARACTERISTICS OF DVI MALE AND FEMALE CONNECTOR SERIES CIRCUIT ASSEMBLY CORP. 18 THOMAS STREET, IRVINE, CA 92618-2777 Page No. 1 CONTENTS CLAUSE PAGE 1.0 SCOPE.. 3 2.0 APPLICABLE
Molex s family of high-speed Micro SAS Connectors featuring the Dual-stack Receptacle with Pin Cover
Design-enhanced Micro SAS connectors now include dual-drive stacked receptacles with an integrated ground plane and a protective pin cover for greater reliability in compact storage applications Molex
28 GBPS PLUGGABLE I/O INTERCONNECT
zsfp+ 28 GBPS PLUGGABLE I/O INTERCONNECT The zsfp+ interconnect is currently one of the fastest single-channel I/O connectors on the market today, transferring data at 28 Gbps with possible expansion to
PCI Express Gen 4 & Gen 5 Card Edge Connectors
PCI Express Gen 4 & Gen 5 Card Edge Connectors Product Presentation Amphenol Information Communications ava and Commercial Products Agenda 1. Value Proposition 2. Product Overview 3. Signal Integrity Performance
BOARD-TO-BOARD HEADERS & RECEPTACLES
TE Connectivity: Every Connection Counts 2015 TE Connectivity Ltd. family of companies. All Rights Reserved CONNECTORS BOARD-TO-BOARD HEADERS & RECEPTACLES TE CONNECTIVITY (TE) MICTOR RECEPT ASSY, 38 POS.
SSL 1.1 Series. Product Data Sheet REV. 4, 2014 JUN
SSL 1.1 Series Product Data Sheet REV. 4, 2014 JUN General Specification Number of Positions Current Rating 2, 4, 6P 3A (Max) Voltage Rating Dielectric Withstand Voltage Durability Color Operating Temperature
BOARD-TO-BOARD HEADERS & RECEPTACLES
TE Connectivity: Every Connection Counts 2015 TE Connectivity Ltd. family of companies. All Rights Reserved CONNECTORS BOARD-TO-BOARD HEADERS & RECEPTACLES TE CONNECTIVITY (TE) MICT,REC,038,ASY,.025,TAPE,CAP
Mezzanine connectors
Mezzanine connectors MezzSelect : a new brand in the industry 2 MezzSelect : A wide range of mezzanine connectors; An easy to use product selector: Web based; Printed. Why the MezzSelect portfolio? 3 The
zsfp+ 28 GBPS PLUGGABLE I/O INTERCONNECT
zsfp+ 28 GBPS PLUGGABLE I/O INTERCONNECT The zsfp+ interconnect is currently one of the fastest single-channel I/O connectors on the market today, transferring data at 28 Gbps with possible expansion to
QUICKIE SHROUDED HEADERS LOW PROFILE
BOARD/WIRE-TO-BOARD CONNECTORS QUICKIE SHROUDED HEADERS LOW PROFILE FEATURES & BENEFITS Recessed pins assure proper alignment and eliminate damage during mating End windows for latching with IDC receptacle
PRODUCT SPECIFICATION
RECEPTACLE 1.0 SCOPE This Product Specification covers the performance requirements of the Serial Attach SCSI / High Speed Serialized host receptacle connector. 2.0 PRODUCT DESCRIPTION 2.1 PRODUCT NAME
zsfp+ (Small Form-factor Pluggable Plus) 25 Gbps Interconnect System
Molex launches the first complete for serial channels, delivering unparalleled signal integrity with superior EMI protection for next-generation Ethernet and Fibre Channel applications Molex s complete
BOARD/WIRE-TO-BOARD CONNECTORS MINITEK UNSHROUDED VERTICAL HEADERS
BOARD/WIRE-TO-BOARD CONNECTORS MINITEK UNSHROUDED VERTICAL HEADERS MINITEK UNSHROUDED VERTICAL HEADERS TECHNICAL INFORMATION MATERIALS Housing: High temperature, black thermoplastic Flammability rating:
NeXLev Product Specification TB2144
NeXLev Product Specification TB2144 Revision B Specification Revision Status Revision SCR No. Description Initial Date - S0161 New Release DM 4/5/2006 A S1357 Update copper material callout, DM 8/31/09
Mini PCI Express Card Socket
Mini PCI Express Card Socket Document No: Page: 1 of 4 1. Scope This specification covers the material and performance requirements for the Mini PCI Express Card Socket series. 2. Applicable documents
EXTreme Guardian Power Connector System
Exceed high-current and reliability requirements in topend server and high-power applications with Molex s compact,, providing EMI/RFI shielding, overmolding and discretewire options for design flexibility
High Speed, Controlled Impedance Two-Piece Connectors (MICTOR, Micro-Strip and STEP-Z Interconnection Systems) Catalog Revised 8-04
High Speed, Controlled Impedance Two-Piece Connectors (MICTOR, Micro-Strip and STEP-Z s) Catalog 6594 Revised 8-04 High Speed Stacking Connectors (Parallel and Right-ngle Board-to-Board) Stacking Height
TB Paladin Connector Design Guidelines. Revision A
Paladin Connector Design Guidelines Specification Revision Status Revision SCR No. Description Initial Date A S5664 New Release J.Dunham 4/4/17 Table of Contents Specification Revision Status... 1 1 Introduction...
Introducing MULTIGIG RT 2-R. Ruggedized Connectors for VPX Applications
Introducing for VPX Applications High Speed Copper Cables associated VPX SOLUTIONS MEZALOK Mezzanine (Compliant to VITA 61) Utilizes the proven, reliable MIL-55302 Mini-Box contact interface, with four
Vertical Top Entry Card Edge: BTB
AVX continues to develop unique connectors to fill the gap in the industrial market, specifically as it relates to low pin count requirements. The newest addition to AVX s broadening line of one piece
HIGH POWER CONTACT ELECTRICAL SPECIFICATIONS
HIGH POWER CONTACT ELECTRICAL SPECIFICATIONS 11.12.438 8.83.348 5.72.225 8.83.348 11.12.438 12.70.500 Receiver Contact Part # 610 149 101 38.48 1.515 36.20 1.425 12.70.500 ITA Contact Part # 610 150 101
PRODUCT SPECIFICATION
RECEPTACLE.0 SCOPE This Product Specification covers the performance requirements of the Serial Attach SCSI / High Speed Serialized host receptacle connector. 2.0 PRODUCT DESCRIPTION 2. PRODUCT NAME AND
Dubox Product Presentation
Product Presentation Basics Portfolio Agenda 1. Value Proposition 2. Product Overview 3. Product Specifications 4. Features & Benefits 5. Part Numbers 6. Markets & Applications 7. Marcomm Collaterals Product
PRODUCT SPECIFICATION CUSTOM CONFIGURABLE MODULAR POWER DOCK CONNECTOR SYSTEM
1.0 SCOPE This Product Specification covers the custom configurable modular printed circuit board (PCB) Dock Connector System with gold plating. 2.0 PRODUCT DESCRIPTION 2.1 PRODUCT NAME AND SERIES NUMBER(S)
Advance Concept Release for. Initial Pre-Production Sampling Only. Device Bay Connector System
Advance Concept Release for Initial Pre-Production Sampling Only R Device Bay Connector System Molex Device Bay Interconnection System Simplifying PC & Peripheral Installation and Upgrades Driven by customers
PRODUCT SPECIFICATION. This specification defines the detailed requirements for the Minitek Pwr3.0 wire to wire and wire to board connectors.
s-12-1177*1.0 SCOPE 1 of 8 D This specification defines the detailed requirements for the Minitek Pwr3.0 wire to wire and wire to board connectors. 2.0 APPLICABLE DOCUMENTS The following documents, of
OSFP Connector Cage & Cable System
PAGE /6 /5/7 UNRESTRICTED OSFP Connector Cage & Cable System PAGE /6 /5/7 UNRESTRICTED.0 SCOPE This Product Specification covers performance, test and quality requirements for the JPC Quad Small Form Factor
APPLICATION SPECIFICATION. 1 of 33 J (r/a header, r/a receptacle, vertical header, vertical receptacle TABLE OF CONTENTS 1. OBJECTIVE...
1 of 33 J Section TABLE OF CONTENTS page no. 1. OBJECTIVE...2 2. SCOPE...2 3. APPLICABLE DOCUMENTS...3 4. GENERAL CUSTOMER INFORMATION...3 4.1. CONNECTOR CONFIGURATIONS...3 4.2. COMPATIBILITY WITH HARD
07. har-link Interface Connectors
. Interface Connectors The highest data rates in combination with perfect shielding characterize the connector. This way data can be passed on optimally within the control cabinet. The locking mechanism
Product Performance Specification Mini Coaxial Connector
Product Performance Specification Mini Coaxial Connector 1. Scope 1.1 Content This specification covers the performance, tests and quality requirements for the Mini Coaxial connector and connector system.
Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. C 2.54mm (.100") Pitch FEATURES AND SPECIFICATIONS Features and Benefits
Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. Mini-Fit, CPI Compliant Pin Interface Headers FEATURES AND SPECIFICATIONS
AMPMODU* MOD I Interconnection System
Product Specification AMPMODU* MOD I Interconnection System 03 JUN 2013 Rev E All Paragraphs Revised 1. SCOPE This specification covers performance and test requirements for the AMPMODU MOD I Interconnection
PDS: Rev :A STATUS:Released Printed: Jan 04, 2012
of 2 A.0 Objective This specification defines the performance, test, quality and reliability requirements of the USB3.0 Standard- A Receptacle. 2.0 Scope This specification is applicable to the termination
Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. 0.80mm (.031") Pitch Small Form-Factor Pluggable (SFP) Receptacle 74441
07. har-link Interface Connectors
. Interface Connectors The highest data rates in combination with perfect shielding characterize the connector. This way data can be passed on optimally within the control cabinet. The locking mechanism
Product Performance Specifications QuadraPaddle Connector
Product Performance Specifications QuadraPaddle Connector 1. Scope 1.1 Content This specification covers the performance, tests and quality requirements for the QuadraPaddle Connector and connector system.
Product Specification AMP Connector USB Consortium, Plug & Receptacle. Lead Free Version
Product Specification 108-60034 AMP Connector USB Consortium, Plug & Receptacle Lead Free Version 1. Scope: 1.1 Contents: This specification covers the requirements for product performance, test methods
PRODUCT SPECIFICATION
1.0 SCOPE DDR4 DIMM SOCKET This Product Specification covers the 0.85mm centerline gold plated DDR4 DIMM edge card connector for 1.40 ± 0.10 thick memory modules..0 PRODUCT DESCRIPTION.1 PRODUCT NAME AND
The con ectors serve low durability cycle applications
Power Connectors & Interconnection Systems Introduction to High Current Card Edge Connectors Product Facts Contacts on.100 [2.54] Centerlines Selective gold plating of contacts for high performance at
Modular Jack Connectors for High-Speed LAN Transmission
NEW Modular Jack Connectors for High-Speed LAN Transmission TM2R Series Built-in Optical Indicators Optical indicator LED Optical pipe Features. Supports High-Speed LAN Transmission Meets requirements
Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. FEATURES AND SPECIFICATIONS Features and enefits Meets UL 1086 Section 8
SPECIFICATION AND PERFORMANCE CHARACTERISTICS OF PCPR CONNECTOR SERIES
SPECIFICATION AND PERFORMANCE CHARACTERISTICS OF PCPR CIRCUIT ASSEMBLY CORP. 18 THOMAS STREET, IRVINE, CA 92618-2777 Page No. 1 CONTENTS Section PAGE 1.0 SCOPE.. 3 2.0 APPLICABLE STANDARDS 2.1 Regulatory
ExaMAX HIGH-SPEED BACKPLANE SYSTEMS
ExaMX HIGH-SPEE CKPLNE SYSTEMS ExaMX HIGH-SPEE CKPLNE SYSTEMS ExaMX high-speed backplane systems deliver 28 Gbps of electrical performance while offering an easy migration path to 56 Gbps. choice of 28
V.6-17 Colibri for COM Express
V.6-17 Colibri for COM Express 0.5 mm SMT Board-to-Board Connector System Introduction Colibri 0.5 mm SMT for 10+ Gbit/s Applications Connectors for COM Express Key Features: Termination ept s Colibri
Product Specification
USB A CONNECTOR 1 of 7 J 1.0 GENERAL This specification defines the performance, tests and quality requirements for the USB A connector. This document is composed of the following sections. 1. General
Product Specification
Product Specification PR041-01 Revision A0 (Date 4-3-2017) Stewart Connector 11118 Susquehanna Trail South Glen Rock, Pa. 17327-9199 Ph: (717) 235-7512 Fax: (717) 235-4675 Product Specification PR0410-01
07. har-link INTERFACE CONNECTORS
. INTERFACE CONNECTORS The highest data rates in combination with perfect shielding characterize the connector. This way data can be passed on optimally within the control cabinet. The locking mechanism
BOARD-TO-BOARD HEADERS & RECEPTACLES
TE Connectivity: Every Connection Counts 2015 TE Connectivity Ltd. family of companies. All Rights Reserved CONNECTORS BOARD-TO-BOARD HEADERS & RECEPTACLES TE CONNECTIVITY (TE) FB-5R,ASY,30,SIG,REC,SL,2.73
Minitek Pwr 3.0 BMI Product Presentation
Product Presentation Basics Portfolio Agenda Value Proposition Product Specifications Features & Benefits Part Numbers Markets & Applications Marcom Collaterals Product Presentation - 2 Value Proposition
GT Micro D High Speed Characterization Report For Differential Data Applications. Micro-D High Speed Characterization Report
GT-14-19 Micro D For Differential Data Applications GMR7580-9S1BXX PCB Mount MWDM2L-9P-XXX-XX Cable Mount Revision History Rev Date Approved Description A 4/10/2014 C. Parsons/D. Armani Initial Release
09. DIN Connectors
. Connectors Connectors that comply with have been in use for years for both board-to-board applications and cable-to-board applications. Their robustness and universality are legendary. The classic signal
Introduction. Purpose. Introduction to JAE s HDMI Connector, DC* Series
Purpose Introduction Introduction to Objectives Application examples Main features General specifications Materials and finishes Content X pages Learning Time: X mins v1.0 1 JAE DC* Series HDMI Connector
PRODUCT SPECIFICATION
1.0 SCOPE This Product Specification covers the 3.00 mm (.118 inch) centerline (pitch) square pin headers when mated with either printed circuit board (PCB) connector or connectors terminated with 20 to
Amphenol. Amphenol. I/O Products. High Speed Interconnects
Amphenol High Speed Interconnects I/O Products Amphenol Now you re Now you re connected connected Amphenol High Speed Interconnects THE COMPANY Amphenol is a global provider of interconnect solutions to
D-SUBMINIATURE PIN-IN-PASTE CONNECTORS
INPUT/OUTPUT CONNECTORS D-SUBMINIATURE PIN-IN-PASTE CONNECTORS OVERVIEW The D-Subminiature connectors are one of the most popular I/O solutions, addressing segments such as Telecommunications, Industrial,
Pwr Blade+ Customer Presentation. Daisy Liu. April 2014
Customer Presentation Daisy Liu April 2014 High Performance PwrBlade Connector - Overview Similar to PwrBlade but with an enhanced power contact design for increased linear current density Includes a 48
CABLE CONNECTOR 6100/6200/6200S/6230 SERIES. 2.54mm Pitch Flat Ribbon Cable Connector K-7
CABLE CONNECTOR 2.54mm Pitch Flat Ribbon Cable Connector 6/6/6S/62 SERIES K-7 6/6/6S/62 SERIES 2.5mm PITCH FC CONNECTOR 2.54mm Pitch FC Connector Product Line-up SERIES / FIGURE TYPE CONNECTOR STYLE TERMINATION
HSSDC. HSSDC High Speed Serial Data Connection receptacles. HSSDC Receptacle. U45 - A APPLICATIONS ORDERING INFORMATION
HSSDC High Speed Serial Data Connection receptacles meet high-speed differential communication protocols with speeds exceeding 1 Gbps such as IEEE 802.3z and Fibre Channel. This system is designed to conform
Amphenol Amphenol Taiwan Corporation Sheet 1 of 16
Amphenol Amphenol Taiwan Corporation Sheet 1 of 16 Title: USB3.0 Product Specification Part Number: GSB3 Series Description: USB3.0 A&B Type Plug & Receptacle Revisions Control Rev. ECN Number Originator
Top Load Socket: BTB
The 9159 series of Board-to-Board interconnect system allows two PCB's to be mated end-to-end creating strips of LED lighting. Designed specifically for the unique Solid State Lighting (SSL) market requiring
APPLICATION SPECIFICATION. Table of Contents
1 of 37 E Section Table of Contents Page No. 1.0 OBJECTIVE... 2 2.0 SCOPE... 2 3.0 GENERAL... 2 3.1 Product Description and Features... 2 3.2 Product Configurations... 2 3.3 Compatibility with Hard Metric
Modular Jack Connectors for High-Speed LAN Transmission
Modular Jack Connectors for High-Speed LAN Transmission TM2R Series Built-in Optical Indicators Optical indicator LED Optical pipe Features. Supports High-Speed LAN Transmission Meets requirements of TIA/EIA-568-B
COMPONENT SPECIFICATION. PC/104 AND PC/104 Plus CONNECTORS JANUARY 2013 CONTENTS: SECTION TITLE PAGE
PC/104 AND PC/104 Plus CONNECTORS JANUARY 2013 CONTENTS: SECTION TITLE PAGE 1 Description of Connector and Intended Application 2 2 Marking of Connector and/or Package 2 3 Ratings 3 Appendix 1 Part Number
SEPTEMBER C.CS.1000 / GB
SEPTEMBER 2005 - C.CS.1000 / GB C R I M P F L E X C O N N E C T O R S CRIMPFLEX connectors TECHNICAL DATA MATERIAL Phosphor bronze MALE SOLDER TAB PLATING The standard connector is tin plated (thickness
PRODUCT SPECIFICATION
SINGLE ROW CONNECTOR SYSTEM 1.0 SCOPE This Product Specification covers the 3.00 mm (.118 inch) centerline (pitch) square pin headers when mated with either printed circuit board (PCB) connector or connectors
PCI-SIG ENGINEERING CHANGE NOTICE
PCI-SIG ENGINEERING CHANGE NOTICE TITLE: Host Socket Recommendations DATE: Updated June 12, 2006 (Initial release April 10, 2006) AFFECTED DOCUMENT: PCI Express Mini Card, Half-Mini Card ECR (Content of
Micro D Series Filtered Connectors
Micro D Series Filtered Connectors For designs that require even smaller connector packages, API s Spectrum Control brand has designed a line of filtered Micro D-Subminiature connectors. This line of connectors
CMC Hybrid Connectors Standard and Power Versions
The Molex family of provides a sealed, high-density, modular and cost-effective connection system for heavy-duty, powertrain and body-electronics applications in the transportation industry The CMC connector
Introduction to High Current Card Edge Connectors
Introduction to High Current Card Edge Connectors Product Facts Contacts on.100 [2.54] Centerlines Selective gold plating of contacts for high performance at low cost Flow solder applications Glass-filled
VMEbus systems System description Technical characteristics System description
Directory chapter 06 / inverse Page VMEbus systems................................................ 06.02 System description.............................................. 06.03 Technical characteristics..........................................
Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. Power Connectors FEATURES AND SPECIFICATIONS Features and Benefits Positive
Ganged Board to Board SMP Solutions. Catalog. belfuse.com/cinch
Ganged Board to Board SMP Solutions Catalog belfuse.com/cinch SMP CONNECTORS One of the key benefits of the SMP connector interface is its use in high frequency blind-mate applications. The design of the
PRODUCT SPECIFICATION TITLE PAGE REVISION
1 of 14 A 1.0 OBJECTIVE This specification defines the performance, test quality and reliability requirement of the Micro Serial-ATA Host and Device connectors. 2.0 SCOPE This specification is applicable
Thank you for downloading this product training module produced by 3M Electronic Solutions Division for Mouser. In this presentation, we will discuss
1 Thank you for downloading this product training module produced by 3M Electronic Solutions Division for Mouser. In this presentation, we will discuss a new 2mm hard metric connector that has been designed
Product Performance Specification Mini Power Connector
Product Performance Specification Mini Power Connector 1. Scope 1.1 Content This specification covers the performance, tests and quality requirements for the Mini Power Connector and connector system.
Elma Bustronic CompactPCI Reference Sheet
Elma Bustronic CompactPCI Reference Sheet Rev. 4 5.10.10 The cpci reference sheet provides relevant reference material for the CompactPCI product line. The information provided may change at anytime. Elma
MDI for 4x25G Copper and Fiber Optic IO. Quadra (CFP4 proposal) Connector System
MDI for 4x25G Copper and Fiber Optic IO Quadra (CFP4 proposal) Connector System Nov 7, 2011 Nathan Tracy, TE Connectivity Tom Palkert, Molex 4x25Gb/s MDI Potential Requirements Critical Needs: Excellent
PRODUCT SPECIFICATION
PRODUCT SPECIFITION PAGE: 1 OF 7 REV: A Serial ATA Connector, (22SAPP-X-X) LIST OF REVISION REV PAGE DESCRIPTION ECN. NO. DATE A 01-07 NEW E9201035 01/24/03 PRODUCT SPECIFITION PAGE: 2 OF 7 REV: A Serial
PwrMAX High Power Connector System (Preliminary)
1 of 14 5 1.0 OBJECTIVE 2.0 SCOPE This specification defines the performance, test, quality and reliability requirements of the PwrMAX Power Connector System. 3.0 GENERAL This specification is applicable
HDMI Product Presentation
HDMI Product Presentation Where does IO-connections stand for? FCI's I/O connector solutions: high-density high-speed interfaces Applications: networking, storage, and memory, power distribution, media
HIGH-SPEED BOARD-TO-BOARD APPLICATION DESIGN GUIDE
HIGH-SPEED BOARD-TO-BOARD APPLICATION DESIGN GUIDE HIGH-SPEED BOARD-TO-BOARD Samtec offers the largest variety of high-speed board-to-board interconnects in the industry with full engineering support,
PRODUCT SPECIFICATION
SIM Card Connector, Hinged Type, 8 Pin, SMT, 1.50mm Profile. Page 1 SIM Card Connector, Hinged Type, 8 Pin, SMT, 1.50mm Profile. Page 2 1.0 SCOPE. This specification covers performance, tests and quality
Amphenol Amphenol Taiwan Corporation Sheet 1 of 11
Amphenol Amphenol Taiwan Corporation Sheet 1 of 11 Title: Part Number: Description: RJ-MAG Connector Product Specification RJMG21202XXXXXX RJmag 1 x 2-Port W/ LED Revisions Control Rev. ECN Number Originator
SERIES MCX 50 MICRO MINIATURE CONNECTORS
SERIES MCX 50 MICRO MINIATURE CONNECTORS DESCRIPTION CONTENT PAGE HUBER+SUHNER MCX micro miniature snap-on connectors offer you an excellent blend of size, weight, durability and performance for applications
Stac64 Connection System Unsealed Headers and Receptacles
Modular, stackable connection system offers single- and multi-bay header solutions to maximize design flexibility in unsealed Transportation applications and greatly reduces time-to-market by eliminating
MAXIMUM SOLUTIONS (2/14 -- PR606) Mill-Max Mfg. Corp. 190 Pine Hollow Road, Oyster Bay, NY Fax:
MAXIMUM SOLUTIONS Mill-Max Series 854 Single Row and 855 Double Row Pitch Surface Mount and Through-Hole Spring-Loaded Connectors and Mating Target Connectors Mill-Max has developed high density, (1,27