Q8 series. Ø8 mm panel mount LED indicators DISTINCTIVE FEATURES ENVIRONMENTAL SPECIFICATIONS GENERAL SPECIFICATIONS MATERIALS MOUNTING LED INDICATORS

Transcription

1 IND-Q LED INDICATORS DISTINCTIVE FEATURES 5mm colored diffused epoxy lens or 5mm water clear super bright LEDs Prominent, recessed and flush bezel styles (2.8 x 0.8) solder lug/faston terminals, pins or (200mm long) wire terminations (2.0 x 0.5) solder lug/faston terminals on tri-color versions ENVIRONMENTAL SPECIFICATIONS IP67 sealing option (EN60529) Operating & Storage Temperature Range: Rear plastic body: -30 C to +65 C ( 22 F to +149 F) Rear epoxy body: -40 C to +85 C ( 40 F to +185 F) GENERAL SPECIFICATIONS Max Reverse Voltage: 5 V Viewing Angle: (dependant on model) Life Expectancy: 100,000 hours Torque: 4 cnm (dependent on option) Maximum panel thickness 7 mm MATERIALS Plated brass bezel finished in bright chrome, black chrome or satin grey and moulded polycarbonate rear body MOUNTING The company reserves the right to change specifications without notice. All LED characteristics are dependent upon environmental conditions. Therefore published data should be considered nominal and subject to variations. 1

2 LED INDICATORS ELECTRICAL SPECIFICATIONS STANDARD LED INTENSITY LED COMPONENT SPECIFICATIONS Prominent and Recessed Flush Forward Voltage HE Red 80 mcd 8 mcd 2.0 V Green 60 mcd 6 mcd 2.2 V Yellow 50 mcd 6 mcd 2.1 V Blue 1,600 mcd 50 mcd 3.3 V White 1,600 mcd 500 mcd 3.3 V Orange 60 mcd 110 mcd 2.2 V Bi-color (Typical) (Red/Green) Tri-color (Typical) (Red/Green/Yellow) 14/30 mcd 15/10 mcd 2.0V/2.2 V 60/15/13 mcd 15/10/6 mcd 2.0 V/2.2 V/2.1 V Voltage Operating Voltage Operating Current (Min to Max) (Typical All Types) 02 (No Resistor)* 1.8 to 3.3 VDC 20 ma max 6 VDC 5.4 to 6.6 VDC 20 ma 12 VDC 10.8 to 13.2 VDC 20 ma 24 VDC 21.6 to 26.4 VDC 20 ma 28 VDC 25.2 to 30.8 VDC 20 ma 110 VAC 99 to 121 VAC 6 ma 220 VAC 207 to 235 VAC 3 ma * Customer to supply resistor for desired operating current. Bi-color - The color is changed by reversing the polarity of the supply voltage. Tri-color - The indicator has red and green LEDs, when both connected yellow is produced. SUPER BRIGHT LED INTENSITY LED COMPONENT SPECIFICATIONS Prominent and Recessed Flush Forward Voltage HE Red 5,000 mcd 1,300 mcd 2.2 V Green 10,000 mcd 1,200 mcd 3.3 V Yellow 4,000 mcd 350 mcd 2.0 V Blue 2,200 mcd 280 mcd 3.3 V White 2,500 mcd 950 mcd 3.3 V Orange 4,000 mcd 500 mcd 2.2 V HYPER BRIGHT LED INTENSITY LED COMPONENT SPECIFICATIONS Prominent and Recessed Flush Forward Voltage HE Red 6,000 mcd 980 mcd 2.2 V Green 1,900 mcd 300 mcd 3.3 V Yellow 1,600 mcd 250 mcd 2.0 V Orange 2,400 mcd 110 mcd 2.2 V The operating voltage must not be exceeded by more that 10% as this will result in reduced life expectancy Luminous intensity is measured at 20 ma on a discrete led unless otherwise stated. Luminous intensities and color shades of white LEDs may vary within a batch. Luminous intensity will be reduced with lower operating current. 2

3 LED INDICATORS BUILD YOUR PART NUMBER Q SERIES MOUNTING HOLE BEZEL STYLE TERMINALS BEZEL FINISH 8 Ø8 mm P Prominent R Recessed F Flush 1 Solder Lug/ Fastons (2.8 x 0.8) 2 Pins 3 Wires 4 Rear epoxy Pins 5 Rear epoxy Wires 6 Short body Pins 7 Short body Wires 8 Short body Lug/ Fastons (2.8 x 0.8) C B G Bright Chrome Black Chrome Satin Grey 9 Extended short body solder Lug/ Fastons (2.8 x 0.5) TYPE OF ILLUMINATION LED COLOR VOLTAGE SEALING XX KK YY ZZ Fixed Light Flashing Light (12V 28VDC) Bi-color Tri-color R G Y B W O HR Red Green Yellow Blue White Orange Hyper Bright Red HG HY HO SR SG SY Hyper Bright Green Hyper Bright Yellow Hyper Bright Orange Red Green Yellow SW SO RG RY GY RYG White Orange Red/Green Red/Yellow Green/Yellow Red/Yellow/ Green 02 no resistor* 06 6 VDC VDC 12A 12 VAC/DC VDC 24A 24 VAC/DC VDC 28A 28 VAC/DC (Blank) E Unsealed IP67 ABOUT THIS SERIES SB Blue VAC VAC * please refer to the forward voltage in electrical specifications Notice: please note that not all combinations of above numbers are available. Gold faston terminal denotes anode (+), silver terminal denotes cathode (-) Standard wire length is 200 mm, 24 AWG UL1061, red wire denotes anode (+), black wire denotes cathode (-) for other wire lengths consult APEM 110 VAC and 220 VAC, only available with terminal options 1 & 3 Bi-color leds, by connecting the gold faston (+) one color is produced, by reversing the supply voltage another color is produced bi-colors are available up to 28 VDC [AC products not available] Take care when soldering to the faston terminals (recommended solder temperature 300 C - 3 sec) Terminal options 2,6,7 & 9 are only available up to 28 V (DC only). Tri-color not available with terminal 9 Terminal code 8 is only available without integral resistor, see forward voltage values. We recommend using hyperbright or superbright leds for use at 110 VAC and 220 VAC Mains voltage product is not recommended for use on 3 phase appliances The tri-color led has red and green leds when both are connected yellow is produced Standard tri-color faston terminals are two anodes (+) and one cathode (-) Tri-color wires are one red (+) and one green (+) anode and one black (-) cathode Tri-color pins are center ( ) cathode, shortest (+) anode pin green, longest (+) anode pin red 3

4 LED INDICATORS PROMINENT BEZEL SOLDER LUG/FASTON WIRES PINS REAR EPOXY WIRES REAR EPOXY PINS SHORT BODY WIRES SHORT BODY PINS 4

5 PROMINENT BEZEL (CONTINUED) SHORT BODY SOLDER LUG/FASTONS EXTENDED SHORT BODY SOLDER LUG/FASTONS LED INDICATORS FLUSH BEZEL SOLDER LUG/FASTON WIRES PINS REAR EPOXY WIRES REAR EPOXY PINS 5

6 LED INDICATORS FLUSH BEZEL (CONTINUED) SHORT BODY WIRES SHORT BODY PINS SHORT BODY SOLDER LUG/FASTONS EXTENDED SHORT BODY SOLDER LUG/FASTONS RECESSED BEZEL SOLDER LUG/FASTON WIRES PINS 6

7 RECESSED BEZEL (CONTINUED) REAR EPOXY WIRES REAR EPOXY PINS LED INDICATORS SHORT BODY WIRES SHORT BODY PINS SHORT BODY SOLDER LUG/FASTONS EXTENDED SHORT BODY SOLDER LUG/FASTONS 7

8 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Apem: Q8P1CXXR02