AC SERIES LIFT CONTROLLER SYSTEMS AYBEY ELEKTRONIK

Size: px

Start display at page:

Download "AC SERIES LIFT CONTROLLER SYSTEMS AYBEY ELEKTRONIK"

Jayson Dixon
6 years ago
Views:

1 AC SERIES LIFT CONTROLLER SYSTEMS AYBEY ELEKTRONIK

2 AC SERIES GENERAL SPECIFICATIONS CE certified as control board and control panel CAN-bus based shaft and group communication system Gets floor information from counter, monostable counter, gray code, encoder and inverter encoder outputs Machine room temperature monitoring circuit Real time clock and date 250 detailed (state, time, date) fault memory

3 AC SERIES GENERAL SPECIFICATIONS Built-in 3-phase and thermistor monitoring circuit Turkish, English, German and Greek menu language options Computer connection over USB, network and Internet Supports simple push button, simple collective, up and down collective traffic systems

4 ACH GENERAL SPECIFICATIONS Designed for hydraulic lifts Parallel, car serial and full serial shaft communication Supports up to 16 floors Releveling and pre-opening door support by integrated door bridging circuit

5 ACT GENERAL SPECIFICATIONS Designed for electric lifts Parallel, car serial and full serial shaft communication Supports up to 32 floors

6 ACS GENERAL SPECIFICATIONS Designed for electric lifts Full serial shaft communication Supports up to 64 floors

7 IN CONFORMITY WITH EN 81-1+A3 Software for geared machine in conformity with lift standard Management of the coil of the speed regulator to control unintented car motion. Continous checking of brake feedback contacts in gearless machine according to annex A3 Getting the position of the car in 1mm accuracy by using encoder.

8 IN CONFORMITY WITH EN 81-2+A3 Valve driving function in conformity with hydraulic lift standard Special built-in software for GMV-A3, Bucher DSV and BLAIN L10 valves. Periodically valve test function Periodic valve test according to count of starts or test date. Getting the positing of the car in 1mm accuracy by using encoder.

9 IN CONFORMITY WITH EN 81-72/73 Integrated software in conformity with EN firefighter lift standard Integrated software in conformity with EN behaviour of lifts in the event of fire standard Alternative fire floor support with 2 independent fire floor inputs (FIRE)

10 PROGRAMMABLE INPUTS/OUTPUTS 55 different programmable functions from 29 inputs 90 different programmable functions from 34 outputs Programmed input/output function transfer support to free input/output in case of any damage in input/output

11 GROUP LIFT Simplex, duplex, triplex up to 8 lifts group operation support Automatic manager assignment in case of any error in manager lift of group Duty transfer in case of any error in a member of group

12 DIFFERENT FLOORS IN GROUP Lifts with different number of stops can work in a group by adjusting missing floor above and missing floor below parameters.

13 SHAFT INFORMATION BY ENCODER Floor selector system with encoder or simulation encoder outputs of inverter Automatic shaft learning Adjustable parameter for accurate floor level detection 1 mm precision car position information Complies the requirements about floor level accuracy listed in EN81-1:A3 and EN81-2:A3

14 DISTANCE BASED MOTION Automatic start-up speed selection and speed dependent target selection. No medium speed required. Directly switching from any travel speed to creeping speed. Automatic minimum distance assignment for speed selection.

15 DISTANCE BASED MOTION Supports short floor application In short floor application, shortest floor distance can be as short as door open zone Effective method especially for high speed lifts

16 COMPUTER CONNECTION Lift remote monitoring via computer Parameters adjustment and save to a file support Access to detailed error list and save to a file support

17 INTERNET / LAN CONNECTION Remote connection support via local area or internet over Ethernet Directly connection over USB

18 GSM CONNECTION Call or send an SMS about the details of the fault the in case of an error/alarm

19 ACCESS SECURITY SYSTEM Lift access control via serial communication units by integrated access control software Floor or time dependent call acceptance system 2 different adjustable period selection Maximum security with 32 bit ( ) ID

20 PRIORITY CALL SYSTEM Priority call system via serial communication units by using access control units (RFID and I-Button) Priority call system with keys Priority call register to VIP floors with 3 different VIP inputs No-waiting for authorized persons

21 PASSWORD PROTECTION Integrated user password to prevent parameter access from unauthorized persons Prevent remote access and remote control from unauthorized user via computer

22 START COUNTER and MAINTENANCE TIME Start counter saved into memory Passing to maintenance mode automatically depends on adjustable start counter limit Passing to maintenance mode automatically depends on adjustable maintenance time

23 RESCUE FUNCTION Only UPS or UPS + Battery based rescue system in case of power failure Integrated rescue function software

24 EXTRA WAITMAN FUNCTION In addition to standard waitman key, only hall calls which are confirmed from cabin by waitman are registered from control panel.

25 LEVELING Releveling function in hydraulic and VVVF systems. Up to 1 mm accuracy in relevelling with encoder. Preopening doors.

26 NEXT DIRECTION ARROWS Next direction assignment at floor level Arrow parameter that selects arrow output function as a motion arrow or next direction arrow

27 BUTTON FAULT CONTROL Temporary inhibition of a button when it is held pressed. Automatically commissioning after passing inspection mode to normal mode

28 MACHINE ROOM TEMPERATURE MONITORING Adjustable minimum/maximum working temperature parameters External thermostat input (THR)

29 LOADING BUTTON Integrated software that holds cabin door open during period of loading button parameter Independent from door open button or photocell

30 CAM DELAY PERIOD Landing door stays locked until cabin door is completely open when the car is at floor level (Only for semi-automatic (manual) landing door and full automatic cabin door system)

31 TWO DOORS SUPPORT Only one door is open depends on call side Doors will open or not at floor level according to doors parameter settings Independent door open-door close buttons and photocell inputs

32 SPECIAL INPUTS DSB Takes lift to out of service. Lift does not serve to call registers, however releveling system continues to function DIK Check of landing door open or not by lift door key DPM Lift stops at floor level where it can and pass out of service mode with open doors

ALC SERIES LIFT CONTROL SYSTEMS USERS MANUAL. Document Version: E Based on the ALC Software Version 2.01a.

ALC SERIES LIFT CONTROL SYSTEMS USERS MANUAL Document Version: E 1.04 Based on the ALC Software Version 2.01a. AYBEY ELEKTRONIK GmbH Lothringer Allee 2 44805 Bochum Germany T: +49 (0) 234 687 36 82 9 G: