SpikeShield Power Quality Products

Transcription

1 Section M SpikeShield Power Quality Products Index Product Page Surge Protection Devices (SPDs) Introduction...M-2 Service/Branch Panel Protection 320kA and 160kA Service/Branch Panel Protection...M-4 120kA Service/Branch Panel Protection...M-5 ired-in Branch Panel Protection...M-6 ired-in Surge Arrestors and Protective Devices...M-7 Surge Protection Plug Strips...M-9 Surge Protection Receptacles...M-11 SNAPConnect Tamper-Resistant Surge Protection Receptacles... M-13 Technical Information...M-19 Surge Protection Panels & ired-in Branch Panels SpikeShield Surge Suppression Plug Strips Isolated round Receptacles Page SNAPConnect Isolated round Receptacles...M-13 Straight Blade Isolated round Receptacles...M-15 Isolated round Twist-Lock Receptacles...M-18 Technical Information...M-20 SNAPConnect Surge and Isolated round Receptacles Surge Suppression & Isolated round Receptacles iring Device-Kellems M-1

2 SpikeShield Power Quality Products Surge Protection Devices (SPDs) Introduction Panel Protection The SpikeShield line of panel surge protection devices offers a broad selection of products to meet the various requirements of industrial, commercial, institutional and residential applications. No other surge suppression standards set by Hubbell. Hubbell offers surge protection products which can handle peak amperage capacities of 50kA to 320kA. The SpikeShield product line also includes a line of panels with replaceable modules. This series features improved performance through the use of a low impedance bus-bar design and easily replaceable bolt-down modules. The SpikeShield branch panel protection system includes the complete compact and economical 50, 80, 100 and 120kA series product offering. These wired-in products can protect branch panels, safety switches and load centers. They can be installed as an the panel. The versatility of the wired-in products allows them to be used on branch panels, as well as main panel protection in smaller commercial facilities. M-2 iring Device-Kellems

3 SpikeShield Power Quality Products 320kA, 160kA and 120kA Service/Branch Panel Protection Features and Benefits Surface mounting Peak Amp Capacity 320kA and 160kA #10 A to #2 A lug size Bolt-down, replaceable modules NEMA 3R/12 enclosure Surface mounting Diagnostics panel Peak Amp Capacity 120kA #12 A to #2 A lug size NEMA 3R/12 enclosure Features Benefits Compact design with Allows installation in areas with space restrictions. Minimizes connecting lead length which bus-bar pathways reduces impedance ensuring improved clamping performance. Peak amp capacity Protects equipment under the worst electrical conditions. Bolt-down modules Assures positive connection and allows for easy replacement. LED and audible alarm Provides visual and audible indication of panel status. reen for operational, red for module failure. status indicator Audible alarm for module failure with silencing. Sine wave tracking Provides uniform clamping throughout the sine wave. Note: All panel products are UL Listed to Standard rd edition. iring Device-Kellems M-3

4 SpikeShield Power Quality Products 320kA and 160kA Service/Branch Panel Protection Ordering Information and Specifications The SpikeShield service entrance product line includes a line of panels with replaceable modules. This series features improved performance through the use of a low impedance bus-bar design and easily replaceable bolt-down modules. latest industry approvals and safety ratings. HBL4P320A HBL8P160DA Service/Branch Panel Protection 320,000 Peak Amp Capacity (Type 2 SPD) Voltage V AC Con guration Catalog Number ith Disconnect Replacement Module 120/208 ye* 1Ph. 3-wire + HBL3P320A HBL4P320A HBL6P320A HBL8P320A HBL10P320A HBL3P320DA HBL4P320DA HBL6P320DA HBL8P320DA HBL10P320DA Service/Branch Panel Protection 160,000 Peak Amp Capacity (Type 2 SPD) 120/208 ye* 1Ph. 3-wire + Note: Units come standard with Surge Counter. *120/208 ye also applies to 127/220 ye. **277/480 ye also applies to 220/380 ye, 230/400 ye and 240/415 ye. HBL3P160A HBL4P160A HBL6P160A HBL8P160A HBL10P160A HBL3P160DA HBL4P160DA HBL6P160DA HBL8P160DA HBL10P160DA HBL160M120A HBL160M120A HBL160M240A & HBL160M120A HBL160M480A HBL160M600A HBL160M120A HBL160M120A HBL160M240A & HBL160M120A HBL160M480A HBL160M600A Voltage Protection Rating (VPR) Catalog Number SCCR I n MCOV L-N L- N- L-L HBL3P320A HBL3P160A HBL4P320A HBL4P160A HBL6P320A HBL6P160A HBL8P320A HBL8P160A HBL10P320A HBL10P160A SCCR - Short Circuit Current Rating. MCOV - Maximum Continuous Operating Voltage. I n - Nominal discharge current. M-4 iring Device-Kellems

5 SpikeShield Power Quality Products 120kA Service/Branch Panel Protection Ordering Information and Specifications The SpikeShield 120kA branch panel product offering features an economical, compact, modular design. These wired-in products can protect branch panels, safety switches and load centers. They can be wired-in products allows them to be used on branch panels, as well as main panel protection found in smaller commercial facilities or residential applications. HBL8P120B Service/Branch Panel Protection 120,000 Peak Amp Capacity (Type 2 SPD) Voltage V AC Con guration Catalog Number Replacement Module 120/208 ye* 1Ph. 3-wire + Note: Units come standard with Surge Counter. *120/208 ye also applies to 127/220 ye. **277/480 ye also applies to 220/380 ye, 230/400 ye and 240/415 ye. HBL3P120B HBL4P120B HBL6P120B HBL8P120B HBL10P120B HBL3P120BM HBL4P120BM HBL6P120BM HBL8P120BM HBL10P120BM Voltage Protection Rating (VPR) Catalog Number SCCR I n MCOV L-N L- N- L-L HBL3P120B HBL4P120B HBL6P120B HBL8P120B HBL10P120B Note: SCCR - Short Circuit Current Rating. MCOV - Maximum Continuous Operating Voltage. I n - Nominal discharge current. iring Device-Kellems M-5

6 SpikeShield Power Quality Products ired-in Branch Panel Protection 100,000 Peak Amperage Capacity The wired-in surge protection device brick design is ideal for areas where space is a major consideration. The surge unit can be mounted directly to the panel through a chase nipple connection which will reduce lead length and impedance while increasing protection levels. and a 200kA SCCR rating. They SpikeShield wired-in surge protective devices HBL9100C ired-in Branch Panel Protection 100,000 Peak Amp Capacity (Type 2 SPD) Service Voltage V AC Con guration Catalog Number 120/208 ye* 600 Delta 1Ph. 3-wire + 3Ph. Delta 3-wire Corner nd 3Ph. Delta 3-wire Corner nd 3Ph. Delta 3-wire Corner nd Note: *120/208 ye also applies to 127/220 ye. **277/480 ye also applies to 220/380 ye, 230/400 ye and 240/415 ye. Also can be used on ungrounded systems. HBL3100C HBL4100C HBL5100C HBL6100C HBL8100C HBL9100C HBL10100C HBL11100C Voltage Protection Rating (VPR) Catalog Number SCCR I n MCOV L-N L- N- L-L HBL3100C HBL4100C HBL5100C 200kA 20kA 300 N/A N/A N/A 1500 HBL6100C HBL8100C HBL9100C HBL10100C HBL11100C SCCR - Short Circuit Current Rating. MCOV - Maximum Continuous Operating Voltage. I n - Nominal discharge current. M-6 iring Device-Kellems

7 SpikeShield Power Quality Products ired-in Surge Arrestors and Protective Devices 36,000, 40,000 and 50,000 Peak Amperage Capacity Surge Arrestors are a low cost solution that may be installed on the line side or load side of the service entrance. These are also an important variable. protective devices feature a compact design, listed. HBL350 HBLSDSA40 HBLSDSA36 ired-in Surge Arrestors, Single Phase 36,000 and Three Phase 40,000 (Type 1 / Type 2 SPD) Service Voltage V AC Con guration Peak Amp Capacity Mounting Means Catalog Number 1Ph. 3-wire 36kA Back Nipple Mount Back Nipple Mount HBLSDSA36 HBLSDSA40 ired-in Surge Protective Devices 50,000 Peak Amp Capacity (Type 1 SPD) Service Voltage V AC Con guration Peak Amp Capacity Mounting Means Catalog Number 1Ph. 3-wire + 50kA Side Nipple Mount HBL350 Voltage Protection Rating (VPR) Catalog Number SCCR I n MCOV L-N L- N- L-L HBLSDSA36 HBLSDSA40 HBL350 HBL3120 SCCR - Short Circuit Current Rating. MCOV - Maximum Continuous Operating Voltage. I n - Nominal discharge current. iring Device-Kellems M-7

8 SpikeShield Power Quality Products Surge Protection Plug Strips Features and Benefits UL rd Edition Energy Saving HBL8ESPS1050M foot cord, energy saving unit with master/slave set up. Turns power off to peripherals when item plugged into master is powered off. HBL7PS1050A $5,000 down-line warranty, tamperresistant shutters. HBL8PS350YL housing, 350 joules, 6 foot cord, wire management feature, $2,500 down-line warranty. HBL4PS1050USB SPD features a black housing, 6 foot cord, smart phones and other electronic devices. M-8 iring Device-Kellems

9 SpikeShield Power Quality Products Surge Protection Plug Strips 15 Ampere, 125 Volts 50/60Hz SpikeShield Surge Protective Devices Plug-in Style Surge Outlets Description # of Outlets Joule Rating Peak AMP Rating Cord Length Color arranty Catalog Number Single outlet plug-in SPD kA N/A Off. N/A HBL1PI750 Single outlet plug-in SPD w/phone line protection kA N/A Off. N/A HBL1PI750M Single outlet plug-in SPD kA N/A Off. N/A HBL1PI750C w/catv protection Three outlet plug-in SPD kA N/A Off. N/A HBL3PI750 SpikeShield Surge Protection Plug Strips Metallic Strips UL rd Edition Description # of Outlets Joule Rating Peak AMP Rating Cord Length Color Down Line arranty Catalog Number Metal Power Strip 6 N/A N/A 6' Off. N/A HBL6MPS Metal SPD ' Off. $2,500 HBL6MPS1050 SPD w/ire Management kA 6' $2,500 HBL6PS350YL SPD w/ire Management kA 6' $2,500 HBL8PS350YL Heavy Duty SPD 6 30kA 6' Black N/A HBL6PS w/hbl5252bk Receptacles Heavy Duty SPD w/hbl8200h Receptacles 6 30kA 6' Black N/A HBL6PSH HBL1PI750 HBL1PI750C HBL1PI750M HBL3PI750 HBL6MPS HBL6PS Tamper-Resistant Non-Metallic Strips Description # of Outlets Joule Rating Peak AMP Rating Cord Length Color Down Line arranty Catalog Number Power Strip 6 N/A N/A 6' Off. N/A HBL6PPS SPD kA 6' Off. $2,500 HBL6PS350A SPD kA 15' Off. $2,500 HBL6PS35015A SPD kA 25' Off. $2,500 HBL6PS35025A ' Off. $2,500 HBL6PS1050MA SPD ' Off. $10,000 HBL7PS1050A ' Off. $10,000 HBL7PS1050MA SPD ' Off. $10,000 HBL7PS105015A ' Off. $25,000 HBL8PS2100MA ' Off. $25,000 HBL8PS2100DA Specialty Non-Metallic Surge Strips Description # of Outlets Joule Rating Peak AMP Rating Cord Length Color Down Line arranty Catalog Number ' Black $10,000 HBL4PS1050USB* Remote Switch SPD ' Off. $25,000 HBL6RSPS2100 w/one Keychain Ring Control Energy Saving SPD w/master/ ' Off. $10,000 HBL8ESPS1050M Energy Saving SPD Master/ Controlled Design w/catv Protection ' Off. $10,000 HBL8ESPS1050C Note: See page Tech-10 for Tamper-Resistant description. *ith 90 Angle Plug. HBL6PS350YL HBL6PS350A HBL8PS2100MA HBL8PS350YL HBL6RSPS2100 HBL8ESPS1050M iring Device-Kellems M-9

10 SpikeShield Power Quality Products Surge Protection Receptacles Features and Benefits Damage-alert alarm sounds when surge protection is no longer functioning and keeps sounding until the receptacle is replaced or muting screw is utilized Muting screw allows damagealert alarm to be silenced until device is replaced Power-on indicator light verifies instantly that power is available at the receptacle and the suppression flashing light indicates surge protection circuitry has been damaged Distinctive surge symbol provides quick visual identification of surge suppression receptacle. High-impact nylon face resists breakage Automatic self-grounding staple attached to bridge meets NEC requirements I8362SA Note: The effectiveness of SPD devices diminishes with the increase in distance between the device and the equipment to be protected. Surge Protection Receptacles Hubbell has the broadest offering of SPD receptacles in the industry with technology that is unsurpassed. Inside Hubbell SPD receptacles are two 22mm square MOVs The nylon component shield protects the printed circuit board from moisture and contaminants. An all-glass PC board provides superior moisture immunity for longer life in humid environments. Conformal coating is provided on the printed circuit board for additional moisture immunity. NEC is a registered trademark of the National Fire Protection Association (NFPA). M-10 iring Device-Kellems

11 SpikeShield Power Quality Products Surge Protection Receptacles 15 and 20 Ampere, 125 Volts AC 60 Hz Circuit uard, Specification rade Duplex Receptacles 15A 125V NEMA 5-15R Surge suppression receptacles with Surge suppression receptacles with per mode. Isolated ground, surge suppression receptacles with light and alarm, surge suppression receptacles with lights. 80 joules/6500a per mode. Office Almond ray Office ray Office HBL5260SA HBL5260ISA HBL5260OSA HBL5260SA HBL5262ALSA HBL5262SA HBL5262YSA HBL5262ISA HBL5262OSA HBL5262SA I5262SA I5262YSA I5262ISA I5262OSA I5262OSA I5262SA HBL415S HBL415IS Circuit uard, Hospital rade Duplex Receptacles Surge suppression receptacles with per mode. Isolated ground, surge suppression receptacles with light and alarm, with lights, 80 joules/6500a per mode. Almond ray ray HBL8262ALSA HBL8262SA HBL8262YSA HBL8262ISA HBL8262RSA HBL8262SA I8262SA I8262YSA I8262ISA I8262OSA I8262RSA I8262SA 20A 125V NEMA 5-20R HBL5360SA HBL5360ISA HBL5360OSA HBL5360SA HBL5362ALSA HBL5362SA HBL5362YSA HBL5362ISA HBL5362OSA HBL5362SA I5362SA I5362YSA I5362ISA I5362OSA I5362OSA I5362SA HBL420S HBL420IS HBL8362ALSA HBL8362SA HBL8362YSA HBL8362ISA HBL8362RSA HBL8362SA I8362SA I8362YSA I8362ISA I8362OSA I8362RSA I8362SA HBL420HS HBL420HIS HBL420HRS 2.62" (66.5) 2.62" (66.5) 2.62" (66.5) 1.30" (33.0) 1.75" (44.5) 1.30" (33.0) 1.23" (31.2) 1.13" (28.7) HBL5262YSA 1.30" (33.0) 1.75" (44.5) I5362SA 1.23" (31.2) 1.13" (28.7) 1.23" (31.2) 4-PLEX Accessories Note: 4-PLEX box is not UL Listed. allplates (Sold Separately) Con guration 1-ang High-Impact Nylon Color Standard Mid-Size Almond ray Off. NP26AL NP26Y NP26I NP26O NP26OI** NP26R NP26 NPJ26AL NPJ26CBL* NPJ26BL NPJ26Y NPJ26C* NPJ26I NPJ26O NPJ26R NPJ26 Note: *Premarked COMPUTER ONLY. Lettering is block ¼" high. **Premarked ISOLATED ROUND. Lettering is block ¼" high. Jumbo size plate. See section N for additional wallplates. See page M-19 for technical information. Chrome Brass Plated Plated Steel SCH26 SBP26 HBL4APBL HBL4API HBL4APR HBL4PBI Stainless Steel (S/S) Brass Smooth S/S Smooth S/S Smooth Brass SS26 SSJ26 SB26 iring Device-Kellems 4.30" sq. (109.2) 1.75" (44.5) HBL8362ISA 3.38" (85.9) 3.02" (76.7).92" (23.4) HBL415S 1.13" (28.7) Dimensions in Inches (mm).1" (2.5) M-11

12 SpikeShield Power Quality Products SNAPConnect Surge Protection and Isolated round Receptacles Heavy Duty Specification rade Surge Suppression Receptacles SpikeShield SNAPConnect tamper-resistant surge receptacles loads from every day power spikes and surges. Isolated round Receptacles SNAPConnect Isolated round devices provide a clean ground path for sensitive equipment. Devices come with power indication, tamper-resistant or a combination of both. Immediate Benefits! Project Timing Save ime and Money Consistent Installation Meet Job Deadlines No Stripping No Looping/No ape No posed erminals In-Use Flush Appearance Simple Replacement Shallow Bo Depth M-12 iring Device-Kellems

13 SpikeShield Power Quality Products SNAPConnect Surge Protection and Isolated round Receptacles Heavy Duty Specification rade 1.75" (44.3) SNAPConnect Tamper-Resistant Surge Protection Receptacle with Power Indicating LED Hospital rade SNAPConnect Tamper-Resistant, surge supression Commercial rade SNAPConnect Tamper-Resistant, surge supression ray Light Almond ray Light Almond 15A 125V NEMA 5-15R SNAP8262S SNAP8262YS SNAP8262IS SNAP8262LAS SNAP8262RS SNAP8262S SNAP5262S SNAP5262YS SNAP5262IS SNAP5262LAS SNAP5262S 20A 125V NEMA 5-20R SNAP8362S SNAP8362YS SNAP8362IS SNAP8362LAS SNAP8362RS SNAP8362S SNAP5362S SNAP5362YS SNAP5362IS SNAP5362LAS SNAP5362S 3.31" (84.0) SNAP5262S 1.64" (41.7) 2.62" (66.5) 1.33" (33.8) SNAPConnect Tamper-Resistant Isolated round Receptacle Hospital rade SNAPConnect Tamper- SNAP8200ITR SNAP8300ITR SNAP8200RITR SNAP8300RITR Hospital rade Style Line decorator SNAP2172ITR SNAP2182ITR SNAPConnect Tamper-Resistant, SNAP2172RITR SNAP2182RITR Commercial rade, isolated ground SNAP5262ITR SNAP5362ITR Style Line Decorator SNAP2152ITR SNAP2162ITR SNAP2182RITR 1.64" (41.7) 2.62" (66.5).86" (21.9) SNAPConnect Isolated round Receptacle with Power Indicating LED Hospital rade SNAPConnect SNAP8200IL SNAP8300IL Tamper-Resistant, isolated ground, SNAP8200RIL SNAP8300RIL Hospital rade Style Line decorator SNAP2172IL SNAP2182IL SNAPConnect Tamper-Resistant, SNAP2172RIL SNAP2182RIL Commercial rade, isolated ground SNAP5262IL SNAP5362IL Style Line Decorator SNAP2152IL SNAP2162IL SNAP5362IL 1.64" (41.7).86" (21.9) 2.62" (66.5) SNAPConnect Tamper-Resistant Isolated round Receptacle with Power Indicating LED Hospital rade SNAPConnect Tamper- SNAP8200ILTR SNAP8200RILTR Commercial rade Style Line decorator SNAP2172ILTR SNAP2172RILTR SNAP8300ILTR SNAP8300RILTR SNAP2182ILTR SNAP2182RILTR Commercial rade, isolated ground SNAP5262ILTR SNAP5362ILTR Style Line decorator SNAP2152ILTR SNAP2162ILTR.86" (21.9) SNAP8300RILTR 2.62" (66.5).78" (19.8) 1.48" (37.6) SNAPConnect Right Angle Pigtailed Connector for eneral Use Description Solid ire Stranded ire Clear right angle terminal with 6 inch leads #12 A THHN/ THN-2, 600V, Polycarbonate housing material Note: See page Tech-10 for Power Indicating and Tamper-Resistant descriptions. See page M-19 for SNAPConnect technical information. SNAP1RA SNAP2RA SNAP1RA.63" (16.0) Dimensions in Inches (mm) iring Device-Kellems M-13

14 SpikeShield Power Quality Products Straight Blade Isolated round Receptacles Features and Benefits rap-around, locked on brass mounting strap provides additional support strength for receptacle assembly reen grounding screw connected directly to the grounding contacts Insulation barrier construction first patented by Hubbell isolates ground contacts from the mounting strap Automatic self-grounding clip assures ground continuity between Straight blade 15A and 20A, 125V a variety of colors Back and side wiring capability provides easy installation with stranded or solid wire Amperage and voltage clearly indicated Impact-resistant nylon face Dimensionally stable, reinforced thermoplastic polyester provides impact strength in addition to heat and flame resistance I5262 Isolated round Receptacles, A Clean Path Provides A Clean round For Sensitive Equipment receptacle. Today when a clean, noise-free ground is more important than ever Hubbell is still setting the standard. Hubbell uses insulation barrier construction on many models to isolate the ground contacts from the mounting strap. The green grounding screw is connected directly to the grounding contacts. In this way, ground contacts are separated from the mounting strap and also from the conventional grounding system. The isolated ground circuit is completed by running a dedicated insulated ground wire from the system ground buss to the green grounding screw. 60 different type receptacles. panels...almost anywhere. toughest standard of all...the Hubbell standard I triangle on the face of the receptacle clearly indicates isolated ground device. M-14 iring Device-Kellems

15 SpikeShield Power Quality Products Straight Blade Isolated round Receptacles Ordering Information Hospital rade, HBL Extra Heavy Duty, Isolated round Receptacles Flush, thermoplastic polyester face, multiple drive screws. Style Line decorator. 15A 125V NEMA 5-15R 0.5 HP I8200 I8200R 20A 125V NEMA 5-20R 1 HP I8300 I8300R I2182 I2182I I2182A Flush, thermoplastic polyester face, single. I8210 I " (33.8) I " (20.3) 2.73" (69.3) 15A and 20A, 125V HBL Extra Heavy Duty, Specification rade, Isolated round Receptacles back and side wired, multiple drive screws. isolated ground. back and side wired. Style Line decorator, flush, nylon face, back and side wired. ray ray Black ray Office ray I5262 I5262Y I5262I I5262R I5262R I5262YR I5262IR I5262RR CR5252I CR5252IBK CR5252IY CR5252II CR5252IO CR5252I I2152 I5362 I5362Y I5362I I5362R I5362 I5362R I5362YR I5362IR I5362RR I5362R CR5352I CR5352IBK CR5352IBL CR5352IY CR5352II CR5352IO CR5352I I2162 I2162Y receptacle. I415 I420* Flush, nylon face, single, I5261 I5361 back and side wired. eather Resistant, single, Isolated ground. I5261R I5361R Note: *Not Fed. Spec. Listed. See page Tech-10 for eather Resistant description. See page M-20 for isolated ground technical information. See page A-46 and A-47 for accessories. See page A-23 for 4-PLEX accessories. 15A 125V NEMA 5-15R 0.5 HP 20A 125V NEMA 5-20R 1 HP 4.30" sq. (109.2) 1.33" (33.8) I " (33.8) 1.05" (26.7).80" (20.3) CR5252I 3.38" (85.9) 3.02" (76.7) 2.73" (69.3) 2.73" (69.3).80" (20.3).92" (23.4) I415.1" (2.5) Dimensions in Inches (mm) iring Device-Kellems M-15

16 SpikeShield Power Quality Products Straight Blade Isolated round Receptacles Ordering Information 1.57" (39.9) 1.32" (33.6) Hubbell-PRO Heavy Duty Specification rade 15A 125V NEMA 5-15R 0.5 HP 20A 125V NEMA 5-20R 1 HP I " (21.1) 2.73" (69.3) back and side wired. Tamper-Resistant, back and side wired. Almond ray Light Almond I5252 I5252AL I5252Y I5252I I5252LA I5252 I5252TR I5252ITR I5252TR I5352 I5352AL I5352Y I5352I I5352LA I5352 I5352TR I5352ITR I5352TR 1.57" (39.9) 1.32" (33.6) Note: See page Tech-10 for Tamper-Resistant description. Commercial Specification rade 2.73" (69.3) side wired. Almond ray Light Almond I15CR I15CRAL I15CRRY I15CRI I15CRLA I15CRHI I20CR I20CRAL I20CRRY I20CRI I20CRLA I20CRHI I20CR 1.57" (39.9) 1.30" (32.9).83" (21.1) Style Line side wired. Almond ray Light Almond I15DR I15DRAL I15DRRY I15DRI I15DRLA I15DRHI I20DR I20DRAL I20DRRY I20DRI I20DRLA I20DRHI I20DR.83" (21.1) 2.73" (69.3) 15A and 20A, 250V HBL Extra Heavy Duty, Specification rade, Isolated round Receptacles back and side wired, multiple drive screws. I5662 I5462 Flush, nylon face, single. I5661 I A 250V NEMA 6-15R 1.5 HP 20A 250V NEMA 6-20R 2 HP 2.25" (57.15) (85.3) 3.68 (93.5) 30A, 125V and 250V Isolated round Receptacles IP20 SUITABILITY 30A 125V NEMA 5-30R 2 HP 30A 250V NEMA 6-30R 2 HP 1.81" (46.0) I9308 Single receptacle, 2 pole, 3 wire grounding. Note: See page M-20 for isolated ground technical information. I9308 I9330 M-16 iring Device-Kellems

17 SpikeShield Power Quality Products Isolated round Twist-Lock Receptacles Features and Benefits Insulation barrier construction first patented by Hubbell isolates ground contact from the mounting strap All-brass mounting and grounding system provides a low resistance ground path ire restraint recess for both back and side wiring reduces terminal loosening High-impact, abuse-resistant nylon face lass-filled thermoplastic polyester base is heat and impact resistant, providing dimensional stability and strength Color-coding by voltage rating helps ensure mating of proper devices One-piece contact with long stress and overheating #10 silicon bronze terminal strength and resistance to corrosion and stripping Accommodates both back and side wiring 20 and 30A devices, simplifying installation Automatic self-grounding clip assures ground continuity between mounting strap and inspection of terminations I2310 Face color-coding by voltage facilitates locating and mating of proper devices. 125V AC 250V AC 480V AC 125/250V AC iring Device-Kellems M-17

18 SpikeShield Power Quality Products Isolated round Twist-Lock Receptacles Ordering Information X 1.70" (43.2) 15A, 125V and 250V Back and Side ired 15A 125V NEMA L5-15R Y 15A 250V NEMA L6-15R Description Poles/ires Color Catalog Number 2 pole, 3 wire I4700A* I4550A* Flush, RTP face, single. 2 pole, 3 wire I4710 I " (69.5) Note: RTP is an abbreviation for reinforced thermoplastic polyester. *Supplied with break-off tabs for split circuit wiring. X X I4700A.95" (24.1) 20A, 125V, 250V and 480V AC Back and Side ired Description Poles/ires Color Catalog Number Flush, nylon face, single. 2 pole, 3 wire I2310 I2320 I A 125V NEMA L5-20R 1 HP Y 20A 250V NEMA L6-20R 2 HP Y 20A 480V AC NEMA L8-20R 3 HP X 1.38" (35.1) 1.27" (32.3) 2.38" (60.5) 30A, 125V and 250V Back and Side ired Description Poles/ires Color Catalog Number Flush, nylon face, single. 2 pole, 3 wire I2610 I A 125V NEMA L5-30R 2 HP Y 30A 250V NEMA L6-30R 2 HP I4710 X X Y 1.70" (43.2) 1.23" (31.2) 20A, 125V/250V and 3Ø 250V AC Back and Side ired Y 20A 125/250V AC NEMA L14-20R 2 (1) HP Z 20A 3Ø 250V AC NEMA L15-20R 3 HP Description Poles/ires Color Catalog Number 2.67" (67.8) 2.38" (60.5) 1.56" (39.6) Flush, nylon face, single. I2410 I2420 X X Y.98" (24.9) I2310 #6-32 TAP 30A, 125V/250V and 3Ø 250V AC Back and Side ired 30A 125/250V AC NEMA L14-30R 2 (2) HP Description Poles/ires Color Catalog Number Y Z 30A 3Ø 250V AC NEMA L15-30R 3 HP Flush, nylon face, single. I2710 I2720 X X Y Y 20A and 30A, 3ØY 120/208V AC Back and Side ired Description Poles/ires Color Catalog Number Flush, nylon face, single. I2510 I2810 Note: See page M-20 for isolated ground technical information. Z 20A 3ØY 120/208V AC NEMA L21-20R 2 HP Z 30A 3ØY 120/208V AC NEMA L21-30R 3 HP M-18 iring Device-Kellems

19 SpikeShield Power Quality Products Surge Protection Device Specifications Technical Information SpikeShield Surge Protection Plug Strips PS350 Series MPS1050 Series PS350YL Series PS1050 Series PS2100 Series 6PS Series HBLCA C Operating Frequency 50/60Hz 50/60Hz 50/60Hz 50/60Hz 50/60Hz 50/60Hz 50/60Hz 6.5kA 6.5kA 30.0kA 200 Operating Temperature F to 160 Performance 500V EMI/RFI Noise Rejection n/a n/a n/a -20dB -20dB -20dB n/a arranty Downline arranty $2,500 $2,500 $2,500 $25,000 None None Housing Type ABS Metal Metal ABS ABS Metal ABS Color Off. Off. version is Black Off. Black Off. Dimensions Length idth Height HBL6MPS Series HBL8ESPS Series HBL6RSPS Series Surge Protection Receptacles Description Part Duple / SNAPConnect 4-PL Type 2 Pole, 3 ire, rounding Receptacle 15A/20A 15A/20A Top Nylon Base Nylon Power Contact Contact Design Tandem Modified Bypass Triple ipe Rating 15A, 125V AC/20A, 125V AC Mounting Strap Clamping Plate Terminal Screws Brass #8-32 rounding Screw Automatic Self-rounding Clip Stainless Steel Mounting Screws Brass LED reen reen Alarm Muting Screw Nylon Performance lectrical Duple / SNAPConnect 4-PL Frequency 60Hz 60Hz Voltage 120V AC + 10% 15% 20V AC + 10% 15% Response Time Protection Modes Normal and Common Modes Normal and Common Modes Transient Suppression 15000A 80 joules 6500A 15000A 80 joules 6500A 600 L-N, 600 L N- 600 L-N, 600 L- EMI/RFI Attenuation at 50 Ohms Normal Mode Operating Temperature Flammability iring Device-Kellems M-19

20 SpikeShield Power Quality Products Isolated round Device Specifications Technical Information Specifications I5262 I5352 Receptacle Part Description Typical Specification Catalog Number I5262 Receptacle 15A Insulator Nylon Terminal Screws Brass #8-32 Center Assembly-Rivet Brass Automatic Self-rounding Clip Stainless Steel Note: *Polyethylene Terephthalate Polyester. Performance lectrical Dielectric Voltage Current Interrupting Mechanical Product Identification nvironmental Material Specifications Receptacle Part Description Catalog Number I5352, I15CR, I15DR Type 2 Pole, 3 ire, rounding Rating 15A, 125V Performance lectrical Dielectric Voltage Current Interrupting Temperature Rise Mechanical Terminal Identification Terminal Accommodation Product Identification nvironmental Material Flammability Operating Temperatures ithstands 2,000V minimum. Certified for current interrupting at full rated current. of overload at 150% of rated direct current. Ratings are permanent part of device. Receptacle Top Base Power Contacts Terminal Clamp rounding Screw Mounting Strap Auto round Mounting Screws 15A Nylon Nylon #8-32 Plated Steel, TriDrive Stainless Steel ithstands 2000V Minimum. 125V. Certified for current interrupting at full rated current. at 150% of rated direct current. Ratings are a permanent part of the device. M-20 iring Device-Kellems