48 Series 4C Series 58 Series Relay Interface Modules 15.8 mm wide Relay Interface Modules 15.8 mm wide

Transcription

1 The FINDER Relay Interface Module ADVANTAGE Take advantage of a pre-assembled unit and make your job easier One Part Number combines relay, socket, clip and LED/suppression module UL listed devices with great switching performance Compliant with the CE directive, IEC standards and the RoHS directive 48 Series Relay Interface Modules 15.8 mm wide AC and DC coil versions and terminal option ratings: 8A / 10A / 16A Single & Double Pole versions 8-way jumper link (095.18)! N/A 24V DC SPDT 10A N/A 24V AC SPDT 10A N/A 120V AC SPDT 10A V DC DPDT 8A V AC DPDT 8A V AC DPDT 8A V DC SPDT 16A V AC SPDT 16A V AC SPDT 16A V DC DPDT 10A Reduces installation cost and system downtime Integrated coil suppression, polarity protection and LED Indicator Jumper links - eliminate necessity for loop bridges Relay ejector/retaining clip Safe separation between coil and output Gold plated contacts for low signal switching available 4C Series Relay Interface Modules 15.8 mm wide AC and DC coil versions Lockable Manual Test Button and terminal option ratings: 8A / 16A Single & Double Pole versions 8-way jumper link (095.18) 58 Series Relay Interface Modules 27 mm wide AC and DC coil versions Lockable Manual Test Button terminal Double Pole (DPDT) 10A Three Pole (3PDT)10A Four Pole (4PDT) 7A 6-way jumper link (094.06) 4C C V DC SPDT 16A 4C C V AC SPDT 16A 4C C V AC SPDT 16A 4C C V DC DPDT 8A 4C C V AC DPDT 8A 4C C V AC DPDT 8A N/A 24V DC DPDT 10A N/A 24V AC DPDT 10A N/A 120V AC DPDT 10A N/A 24V DC 3PDT 10A N/A 24V AC 3PDT 10A N/A 120V AC 3PDT 10A V DC 4PDT 7A V AC 4PDT 7A V AC 4PDT 7A Bold listed Items are normally in stock.

2 38 Series 6.2 mm wide EMR - DC, AC or AC/DC coil versions SSR - DC or AC/DC input versions and terminal option Integrated coil indication and protection circuit 20-way jumper link (093.20) SPDT - 6A Single solid state output: 0.1A 1.5V DC...48V DC 2A 1.5V DC...24V DC 2A 12V AC...240V AC 38 Series 6.2 mm wide TIMER Timed Interface Module 4 functions & 4 time scales 0.1s 6h EMR - AC/DC (12 or 24V) supply versions SSR - AC/DC (24V) supply SPDT - 6A Single solid state output: 2A 1.5V DC...24V DC 2A 12V AC...240V AC 38 Series 14 mm wide EMR - DC or AC/DC coil versions SSR - DC input versions and terminal options Integrated coil indication and protection circuit 8-way jumper link (093.08) DPDT - 8A Single solid state output: 5A 1.5V DC...24V DC 3A 12V AC...240V AC Electromechanical Relay & Socket Combinations Timer Functions: TIMER V DC SPDT 6A V DC SPDT 6A V AC/DC SPDT 6A V AC/DC SPDT 6A V AC/DC SPDT 6A V AC/DC SPDT 6A V AC/DC SPDT 6A V AC SPDT 6A Solid State Relay & Socket Combinations Output V DC 2A VDC V DC 2A VAC V AC/DC 2A VDC V AC/DC 2A VAC AI: ON delay DI: ON pulse GI: Fixed pulse (0.5s) delayed SW: Symmetrical recycling: ON start Output N/A 12V AC/DC SPDT 6A EMR N/A 24V AC/DC SPDT 6A EMR N/A 24V AC/DC 2A VDC N/A 24V AC/DC 2A VAC Electromechanical Relay & Socket Combinations V DC DPDT 8A V AC/DC DPDT 8A V AC/DC DPDT 8A V AC/DC DPDT 8A Solid State Relay & Socket Combinations Output V DC 5A VDC V DC 3A VAC FINDER RELAYS, INC Capital View Drive Suwanee, GA Tel: (770)

3 46 Series - SPDT 16A & DPDT 8A - Quick Pick 55 Series - DPDT/3PDT 10A & 4PDT 7A - Quick Pick Part Number XX 24V DC SPDT 16A 97.01SPA XX 24V AC SPDT 16A 97.01SPA XX 120V AC SPDT 16A 97.01SPA XX 24V DC DPDT 8A 97.02SPA XX 24V AC DPDT 8A 97.02SPA XX 120V AC DPDT 8A 97.02SPA lockable test button, mechanical & LED indicator for AC s lockable test button, mechanical & LED indicator for DC s Miniature industrial relays - Socket mount or direct connection via Faston connectors - Available with lockable test button, mechanical & LED indicator - 8 mm, 6 kv (1.2/50 µs) isolation, coil-contacts UL Rating for 46.61: 16A - 277V AC 10A - 30V DC 1/ V AC 3/ V AC UL Rating for 46.52: 8A - 277V AC 6A - 30V DC 1/ V AC 1/ V AC 97 Series General purpose relays - PCB or Plug-in mounting - Available with lockable test button, mechanical & LED indicator Part Number XX 24V DC DPDT 10A 94.02/ XX 24V AC DPDT 10A 94.02/ XX 120V AC DPDT 10A 94.02/ XX 24V DC 3PDT 10A 94.03/ XX 24V AC 3PDT 10A 94.03/ XX 120V AC 3PDT 10A 94.03/ XX 24V DC 4PDT 7A 94.04/ XX 24V AC 4PDT 7A 94.04/ XX 120V AC 4PDT 7A 94.04/ Series - DPDT 12A & 4PDT 12A - Quick Pick 60 Series - DPDT 10A & 3PDT 10A - Quick Pick Miniature power relays - PCB or Plug-in mounting - Flange mount option (Faston 187 termination) - Available with lockable test button, mechanical & LED indicator (55.32 & only) lockable test button (55.33 only) LED indicator for AC s LED indicator for DC s UL Rating for & 55.33: 10A - 277V AC 10A - 24V DC 1/ V AC 3/ V AC UL Rating for 55.34: 7A - 277V AC 7A - 30V DC 1/ V AC 1/ V AC 94 Series General purpose relays - 8 & 11 pin plug-in - Available with lockable test button, mechanical flag & LED indicator - Version with bifurcated contacts for low level switching Part Number XX 24V DC DPDT 12A 96.02/ XX 24V AC DPDT 12A 96.02/ XX 120V AC DPDT 12A 96.02/ XX 24V DC 4PDT 12A 96.04/ XX 24V AC 4PDT 12A 96.04/ XX 120V AC 4PDT 12A 96.04/ LED indicator for AC s LED indicator for DC s UL Rating for & 56.34: 12A - 277V AC 8A - 30V DC 1/ V AC V AC 96 Series Part Number XX 24V DC DPDT 10A 90.02/ XX 24V AC DPDT 10A 90.02/ XX 120V AC DPDT 10A 90.02/ XX 24V DC 3PDT 10A 90.03/ XX 24V AC 3PDT 10A 90.03/ XX 120V AC 3PDT 10A 90.03/ LED indicator for AC s LED indicator & Diode for DC s UL Rating for & 60.13: 10A - 277V AC 10A - 30V DC 1/ V AC V AC 90 Series

4 62 Series - DPDT 15A & 3PDT 15A - Quick Pick 99 Series - EMC Modules - Quick Pick Part Number XX 24V DC DPDT 15A XX 24V AC DPDT 15A XX 120V AC DPDT 15A XX 24V DC 3PDT 15A XX 24V AC 3PDT 15A XX 120V AC 3PDT 15A LED indicator for AC s LED indicator & Diode for DC s 66 Series - DPST-NO 30A - Quick Pick Power relays - PCB mount or Plug-in mount (Faston 187) or Flange mount (Faston 250) - NO contacts options, > 3mm contact gap - LED, mechanical indicator & test button options UL Rating for & 62.33: 15A - 277V AC 10A - 400V AC 8A - 480V AC 15A - 30V DC 3/ V AC V AC 92 Series Series Series indication and EMC suppression modules Depending on module selected, they can provide: - Suppression of coil back EMF on switch-off - LED indication to show when the coil in energized - Protection against reverse polarity applied across the coil Part Number Part Number Voltage Description V DC LED & Diode V AC LED & Varistor V AC LED & Varistor For : 90.02, , 94.03, , , For : 94.72, 94.73, , Series - Timer Plug-In Modules- Quick Pick Timer modules - Multi-voltage - Time scale from 0.05s to 100h - Wide supply range in AC or DC coils Timer module plugs into the socket! Power relays - PCB mount or Flange mount (Faston 250) - 8mm, 6kV (1.2/50 µs) isolation, coil - contacts Part Number V DC DPST-NO 30A V AC DPST-NO 30A V AC DPST-NO 30A Multi-function/Multi-voltage Timers 80 Series 85 Series 83/87 Series 88 Series UL Rating for 66.82: 30A - 277V AC 24A - 30V DC V AC V AC Part Number for voltage V AC/DC Multi-function 90.02, 90.03, 92.03, V AC/DC Bi-function V AC Bi-function 90.02, 90.03, 92.03, 94.02, 94.03, 94.04, 96.02, 96.04, 97.01, , 90.03, 92.03, 94.02, 94.03, 94.04, 96.02, 96.04, 97.01, FINDER products have a wide range of quality approvals with great switching performance. Compliant with the CE directive, IEC standards and the RoHS directive. FINDER RELAYS, INC Capital View Drive Suwanee, GA Tel: (770)

5 39 Series The power in relays and timers since 1954 UL Listed - 39 Series MasterINTERFACE 6.2mm Interface Modules The 39 Series MasterINTERFACE module is a new concept in interface relays from Finder. Ultraslim (only 6.2 mm) available in 5 different models; both EMR and SSR versions; suitable for interfacing with PLC-controlled automated systems. FINDER products have a wide range of quality approvals with great switching performance. Compliant with the CE directive, IEC standards and the RoHS directive. RoHS compliance

6 39 Series MasterBASIC Module - For general interface use in any type of system and application. MasterPLUS Module with optional fuse holder (093.63) - In addition to the features of the MasterBASIC, the MasterPLUS allows extra protection to the output circuit thanks to the optional replaceable fuse. The main use is to protect the relay output against any accidental overcurrent or short circuit. Replacement of fuses (5x20 mm) is made possible due to the pull-out accessory. MasterINPUT & MasterOUTPUT Modules allow significant time savings with regards to connection in applications where a single contact closure is required. These models allow a direct connection to the interface without the need for additional, thus saving space in the panel. MasterINPUT modules can be used in interface applications between sensors, contacts or limit switches and PLC input circuits. MasterOUTPUT modules are suitable for interfacing between PLC outputs and relays, motors and solenoids. MasterTIMER This module is a multi-function and multi-scale timed interface module. Timer adjustment is via a top mounted rotary knob, accessible after assembly. The MasterTIMER module also accepts output fuse holder for quick and easy protection to the output circuit. Accessories include: - 16-Way Jumper links in three different colors: Blue(093.16), Red( ), Black( ) - Separation plate (093.60) for 6.2mm or 1.8mm separation. - Fuse Holder (093.63) - MasterADAPTER ( ) and 6.5 cable ( U) allow quick termination from the MasterINTERFACE to the PLC outputs UL File E81856 Your authorized Finder Distributor: FINDER RELAYS, INC Capital View Drive Suwanee, GA Document #: RN Phone: (770) Fax: (770) sales@finder-us.com

7 CONTROLS INTERFACE MODULES MATCH SPECIFIC REQUIREMENTS As the cost-to-performance ratio for electronics continues to fall, industrial controllers have become more of a commodity item. One drawback of this trend is that controllers invariably provide fixed and inflexible electrical interfaces, says Norman Carnt, technical manager, Finder As processes, machine control and automation become ever more complex, industrial controllers have become more of a commodity item, offering an amount of control power sufficient to handle most applications. However, controllers invariably provide fixed and inflexible electrical interfaces. This inflexibility is almost inevitable since no single interface can satisfy the disparate needs of switching both thermocouples and highpower contactor coils. And since the provision of optimised plug-in interfaces is seen as too costly a feature for the standard industrial controller, no easy fix exists within the controller. This point, combined with the need for quick and easy replacement of worn or damaged interfaces, has meant the use of external interface relay modules has become the de facto solution. EVOLUTION A number of interface relay module styles are available to provide the bridge between the industrial controller and the increasing number of real-world control scenarios. At one time the most common style simply incorporated multiple PCB relays on a single board, which was in turn mounted on a 35mm rail. This was helpful where an enhanced current rating was needed across a block of outputs, but it tended to hinder the tailoring of outputs from channel to channel and be bulky. Today, the preferred solutions are of an ultra-slim single pole module type, particularly those equipped with a replaceable relay element. Different versions can be selected channel-by-channel to match the particular requirements of the load, without over or underspecification. The replaceable relay type also offers quick and easy maintenance for those applications where exceptional longevity is paramount. Development of this approach has led to further benefits in cost and time-saving through innovations such as multi-way jumper links for simple common circuit interconnection between adjacent interface relay modules, and the inclusion of identification labels to aid commissioning and maintenance. THE FINDER WAY By identifying a relatively limited number of relay/socket/ module combinations, and giving each combination a single part number, Finder has long provided the design engineer with access to a range of ideally matched components that are assembled and ready to accept wiring offering the additional benefits of reduced inventory, purchasing time and cost. However, there are small but significant differences in the ideal feature set of an interface relay, depending on whether the device is on the input or the output side of the controller. Until now this aspect of design had not been fully addressed. A NEW APPROACH Finder has introduced a new family of ultra-slim relay interface modules that provides a low-cost, space-saving solution for a host of KEY POINTS industrial applications. The 39 Series MasterINTERFACE range incorporates an innovative, replaceable fuse for output circuit protection, plus busbars and that simplify input and output wiring. Housed in a compact 6.2mm wide package, the 39 Series offers integral coil protection circuitry, as well as a secure retention and ejection clip. Five dedicated module types are offered to meet the requirements of basic, enhanced, input, output and timer interface functions. Available with electromechanical or solid state relays, the MasterBASIC features common link supply terminal positions, allowing the use of a 16-way jumper link. The enhanced MasterPLUS module adds the option of a quick connection replaceable output fuse and special leakage current suppression versions to mitigate detrimental effects caused by residual current in the input circuit. Both the MasterINPUT and MasterOUTPUT incorporate additional busbar jumper links and necessary for the full A number of interface relay module styles are available for industrial control applications With its 39 Series, Finder addresses small but significant differences in the ideal features set of an interface relay, which depend on whether the device is on the input or the output side of the controller connection of 2- or 3-wire input devices and output devices respectively, reducing component cost, time and panel space. The MasterTIMER is a multifunction and multi-range device with DIP-switch selection of 4 time scales and 8 functions, with timer delay adjustment achieved via an easy-to-access rotary knob on the top surface of the module. A range of accessories is available to support the 39 Series, including red, blue and black 16-way jumper links, and dual purpose separators (1.8mm or 6.2mm) for the visual or protective separation of groups of interfaces operating from different supply voltages, or for the protection of cut ends of jumper links. The MasterADAPTER permits the easy connection of A1/A2 of up to 8 MasterINTERFACE modules to PLC outputs via a 14-way ribbon cable, plus simple 2-wire power supply connection, providing significant wiring savings. Tel: HAVE AN OPINION? Share your comments on this article online at: bit.ly/