Chairman Koala Mini-Flex

Transcription

1 * Indicates a Required Field Dealer Information * ATP: Dealer Code: * Dealer Name: Address: * City: * State/Zip: * Phone#: * Fax#: PO#: Address: Client Information Permobil recommends that the client is evaluated by a certified rehab specialist. * First Name: * Last Name: Diagnosis: Funding Source: Client Age: Client Measurements * Weight: *Height: A) Top of Shoulders: B) Chest Depth: C) Chest Width: D) Seat Depth: E) Top of Head: F) Elbow to Hand: G) Seat Pan to Elbow: H) Hip Width: *I) Knee to Foot: Three column pricing on order/quote: Display HCPCS Codes on order/quote: Please send order/quote to fax#: (800) to: sales@permobil.com Permobil Inc. 300 Duke Dr. Lebanon, TN Tel: (800) Fax: (800) Prices effective November 1, 2017

2 Chair Model and Colors CHOOSE BASE: I Koala Mini-Flex w/ R-net 9, K0890 Price Includes: FWD Koala Power Base setup for one Power Seat Function, R-net Electronics, Tie-Down Hardware for Strap Systems, Charger and Standard Positioning Belt. Must choose Flat Free or Pneumatic Tires below. Max Speed = 4MPH, Weight Capacity = 80lbs, STFH = 15". CHOOSE DRIVE TIRES: I Tri Spoke Split Rim w/ FF Drive Tires x 8" No Charge I Tri Spoke Split Rim w/ Pneumatic Tire x 8" No Charge CHOOSE SHROUD COLOR: I Shroud for Koala - Onyx Black No Charge I Shroud for Koala - Pop Star Pink No Charge I Shroud for Koala - Platinum Silver No Charge I Shroud for Koala - Volcano Red No Charge I Shroud for Koala - Cobalt Blue No Charge I Shroud for Koala - Purple Rain No Charge I Shroud for Koala - Extreme Yellow No Charge I Shroud for Koala - Green Apple No Charge CHOOSE HUBCAP COLOR: Match Hub Cap Color to Shroud: Note: Hub caps will be matched to shroud color if no selection is made. I10871 Solid Color Hub Caps - Pair No Charge Platinum Silver: Onyx Black: Cobalt Blue: Phantom Grey: Pop Star Pink: Volcano Red: Purple Rain: Titan Blue: Sublime Green: Crystal Blue: Vintage Wine: Extreme Yellow: Chili Pepper Red: Base Options MUST CHOOSE BATTERIES: I Batteries, Koala (40AH) Sealed Gel, x2, Installed I Light Kit - Koala I Front Bumper Koala I Enhanced Steering Perform Unit (ESP), R-net 1, Recommended item with switched drive inputs for improved tracking. ID51113 Programming Key for R-net - Permobil Version Joystick Options CHOOSE JOYSTICK TYPE: PLEASE NOTE: For additional input devices, please refer to the Alternative Drive Systems Section. I R-net LED Remote Joystick No Charge This Joystick does NOT have a Display Screen and does NOT contain mono jacks. Limited to five profiles with this Joystick Module. I R-net Remote Color JS w/ Mono Jacks, Lights I R-net Remote Color JS w/ Toggle Switches, Lights 1, Page 2 of 11

3 Joystick Options CHOOSE JOYSTICK TYPE: I Compact Advanced Joystick for R-net E2373 Compact sized joystick that does not contain an LCD Display. Must order Expandable Controller with this part. Contains two mono jacks for mode & on/off. Does NOT contain a wrist support pad. If you want a wrist support pad, please select I10621 below. I10621 Add Wrist Pad to Compact Joystick Advanced CHOOSE JOYSTICK HANDLE TYPE: I10045 Cone Shaped Joystick Knob - Standard No Charge I Chin Cup For Joystick Knob E2324 I "T" Handle For Joystick Knob E2323 I "Large Ball" For Joystick Knob E2323 I "Softball" For Joystick Knob E2323 I "Mushroom" For Joystick Knob E2323 I "Stick" For Joystick Knob E2323 I " Black Foam Ball For Joystick Knob E2323 I Bodypoint J/S Handle 3" U-Shaped w/ Flex-Shaft E2323 I Bodypoint J/S Handle 4" U-Shaped w/ Flex-Shaft E2323 I Bodypoint J/S Handle Dome Shaped, Rubber E2323 CHOOSE JOYSTICK MOUNT: I10127 Fixed Joystick Mount - Right No Charge I10136 Fixed Joystick Mount - Left No Charge I Joystick Mount-Right Swing Away E1028 I Joystick Mount-Left Swing Away E1028 I Midline Control Mount E1028 Mount Midline on Left Armrest: Mount Midline on Right Armrest: I Bodypoint Tri-Lock Midline Mount Assembly E1028 Includes L-shaped joystick arm and height adjustable mounting clamp. Joystick mount sold separately (select from the mounts listed below). Please indicate if you want midline mounted on left or right armrest: Mount Midline on Left Armrest: Mount Midline on Right Armrest: I Bodypoint Tri-Lock Mount for R-net/Compact Adv JS E1028 I Bodypoint Tri-Lock Mount for Compact Joystick E1028 I11269 Bodypoint Tri-Lock Mount for Omni E1028 I10842 PERMOFix Mount for Mini/Compact Joystick E1028 Includes a shim washer that allows the PERMOFix joint to be mounted on the joystick arm. Provides an adjustable mount for a Mini Joystick or Compact Joystick. I11068 Expandable Controller - R-net E2377 This item is required when ordering PN ID51153, PN ID51149, or when ordering an Alternative Drive Control. I10513 Harness for Expandable Controller E2313 Must be ordered with any Expandable Controller. I Attendant Control R-net 1, E2331 I R-net Bluetooth idevice Module K0108 Allows input device commands (such as joystick nudges or switch clicks) to be used to operate an iphone, ipad or ipod. By assigning each input to an ios function, users can make phone calls, send texts and s and access applications. Kit includes a Bluetooth idevice Module, an R-net Bus Cable, and two mono jack cables for direct switch inputs (switches not included). Must be ordered with a Color JSM or Omni for mode display. Page 3 of 11

4 Joystick Options I R-net Bluetooth Mouse Module K0108 Enables mouse control through any R-net input device. It can operate the mouse on a computer and on select Android devices (with R-net for Android app). Kit includes a Bluetooth Mouse Module, an R-net Bus Cable, two mono jack cables for L/R click (switches not included) and a USB BT Adapter for user's computer. Note: BT Adapter may not work with all computers. Must be ordered with a Color JSM or Omni for mode display. I Add a second Bluetooth Mouse Module K0108 Allows R-net to simultaneously pair to a second compatible computer or Android device. Each module is accessible through a separate R-net mode. Kit includes a unique Bluetooth Mouse Module, an R-net Bus Cable, two mono jack cables for L/R click and a USB BT Adapter. I10582 Output Module (IOM) for R-net Control System 1, K0108 Enables a user to control an external device (ex: Communication Device, ECU, Door Opener, etc.) through the drive input (JSM, Head Array, etc.). Each module can provide up to 4 switch closures. May require specialty cable or wiring. Up to three output modules can be installed on one wheelchair. Seating System STANDARD SEATING SYSTEM: IKOALA-MFII Mini-Flex Seat w/ Power Tilt 7, K0108 Single actuator elevates into tilt (up to 25 ) to allow seating system to clear base. Seating system also includes an adjustable seat frame, adjustable backrest and legrest angle, positioning belt and one-piece footplate. Seating System Options CHOOSE SEAT FUNCTION CONTROL TYPE: I10418 Single Seat Function Control Switch for R-net No Charge E2310 Please choose either Push Buttons or Toggle Switches below. I10419 Single Seat Function Control Kit for R-net 1, E2310 For operation of a single seat function through the wheelchair electronics via the drive control and/or ICS Switchbox. Order with R-net Controller or remote joystick options. Please indicate below if you want push buttons or toggles on the ICS Switchbox. CHOOSE PUSH BUTTONS OR TOGGLES: I Push Buttons on ICS Switchbox (3m) No Charge I Toggle Switches on ICS Switchbox (3m) I Do Not Install ICS Switchbox, Send as Part No Charge CHOOSE MOUNTING POSITION OF ICS SWITCHBOX: I10626 Mount ICS Switchbox onto R-net Joystick Bracket No Charge ICS Switchbox will be mounted to the same bracket as the R-net Joystick Module. If this item is selected, the ICS Switchbox will swing away with the Joystick Module. I Mount ICS Switchbox onto Armrest - VS, Koala No Charge ICS Switchbox will be mounted to the end of the armrest pad. If this item is selected, the ICS Switchbox will NOT swing away with the Joystick Module. Mount on Left: Mount on Right: I Mount ICS Switchbox on Backrest Mount on Left: Mount on Right: I ICS Alternative Switchbox for R-net Electronics 1, K0108 Seat function interface box that accommodates up to 8 momentary switches. Provides an additional method for accessing the seat functions. 1/8" mini-mono switches not included. Page 4 of 11

5 Seating System Options I Remote Stop System - All Electronics 1, E2321 Consists of a Radio Frequency (RF) handheld transmitter and an RF receiver mounted on the wheelchair. Custom charges may be required when ordering with a PS/PS Jr seat, a low backrest height or a pediatric wheelchair. If ordering on a K450, push handles must also be selected. Backrest Options CHOOSE BACKREST TYPE: BACKREST NOTE: Backrest heights are measured from the seat pan to the top of the backrest shell with the backrest set at 90. Backrest cushions are provided with the MF Backrests only. I MF Backrest 10"W x 14"H No Charge I MF Backrest 12"W x 16"H No Charge I MF Backrest 14"W x 20"H No Charge I10113 Tubular Backrest Frame Mini-Flex, 12" Wide No Charge Backrest canes to mount aftermarket backrest systems. I10114 Tubular Backrest Frame Mini-Flex, 14" Wide No Charge Backrest canes to mount aftermarket backrest systems. CHOOSE BACKREST CUSHION: I MX/MF Backrest Cushion, 10"W x 14"T - Leatherette No Charge I MX/MF Backrest Cushion, 12"W x 16"T - Leatherette No Charge I MX/MF Backrest Cushion, 14"W x 20"T - Leatherette No Charge I MX/MF Backrest Cushion, 10"W x 14"T - Black Mesh No Charge I MX/MF Backrest Cushion, 12"W x 16"T - Black Mesh No Charge I MX/MF Backrest Cushion, 14"W x 20"T - Black Mesh No Charge Seat Sizing CHOOSE SEAT TYPE: I MF Seat 10"W x 10"D No Charge I MF Seat 12"W x 12"D No Charge I MF Seat 14"W x 14"D No Charge I10115 Tubular Seat Frame Mini-Flex, 12" Wide No Charge Seat frame tubes to mount aftermarket seating systems. I10116 Tubular Seat Frame Mini-Flex, 14" Wide No Charge Seat frame tubes to mount aftermarket seating systems. CHOOSE SEAT CUSHION: I Leatherette Seat Cushion MX/MF - 10"W x 10"D I Leatherette Seat Cushion MX/MF - 12"W x 12"D I Leatherette Seat Cushion MX/MF - 14"W x 14"D I Black Mesh Seat Cushion MX/MF - 10"W x 10"D I Black Mesh Seat Cushion MX/MF - 12"W x 12"D I Black Mesh Seat Cushion MX/MF - 14"W x 14"D Armrest Options CHOOSE LEFT ARMREST PAD: I Armrest Left, 8" Leatherette No Charge I Armrest Left, 10" Leatherette No Charge I Armrest Left, 8" Black Fabric No Charge Page 5 of 11

6 Armrest Options CHOOSE LEFT ARMREST PAD: I Armrest Left, 10" Black Fabric No Charge CHOOSE RIGHT ARMREST PAD: I Armrest Right, 8" Leatherette No Charge I Armrest Right, 10" Leatherette No Charge I Armrest Right, 8" Black Fabric No Charge I Armrest Right, 10" Black Fabric No Charge I10137 Height Adjustable Armrest Assembly E0973 I10016 Height Adjustable Armrest Assembly - No Charge No Charge No charge with power tilt and/or recline. Legrest Options I Footplate, Small w/ 5-12" Pan to Ftplate Adj. No Charge Footplate is 10"W x 6.75"D. I Footplate, Large w/ 5-12" Pan to Ftplate Adj. No Charge Footplate is 12"W x 7.875"D. I Foot Strap Kit E0951,E0952 I BP Ankle Huggers, Med Side Release, Adj (Pair) This item will be sent as a part with the wheelchair. It will not be installed. Accessories I Positioning Belt No Charge I Positioning Belt Retractable E0978 HEADREST OPTIONS: I MF Headrest for Koala/PS Jr - Leatherette E0955 Must also select PN I I10552 Adj/Removable Headrest Hardware E1028 I Universal Headrest Adapter Please Note: Recline is limited to 160 or less (depending on backrest height) when ordering a Universal Headrest Adapter on a 23" or 24" tall Corpus backrest. I Thigh Support Kit Leatherette E0956 Must also select PN I I10550 Adj Removable - Thigh Support Hardware (Pair) E1028 I Lateral Supports Leatherette E0956 Must also select PN I I10551 Adj Removable - Trunk Support Hardware (Pair) E1028 I Knee Block Leatherette K0108 I RAM X-Grip 10" Tablet Holder w/swing Away Mount E1028 Compatible with most 10" screen tablets with or without a protective case. Includes adjustable swing away mount (I ). Customization may be required if ordered with an Omni. I USB Charger Provides up to 1.5A (at 5V) to charge most smartphones and tablets. The charger features an isolated circuit design for improved safety; and by pulling power from the ICS, prevents battery drainage when the chair is powered off. Includes mounting hardware and ICS connector. Please select armrest for mounting, keeping in mind that charger may need to be relocated. Mount on left armrest: Mount on right armrest: Page 6 of 11

7 Accessories I Medical Necessities Bag Hooks K0108 Please Note: Recline is limited to 165 or less (depending on backrest height) when ordered with 23" or 24" tall Ergo backrest. Custom required if ordered with a ROHO AGILITY backrest. I Chest Harness, Position Belt w/bracket E0960 Chest harness kit includes a standard positioning belt. ISH212 BP Shoulder Harness Medium, Front Pull E0960 This item will be sent as a part with the wheelchair. It will not be installed. I Small Angle Adjustable Tray E0950 Must also select PN I I10556 Adj Removable - Tray Hardware (1 Each) E1028 Alternative Drive Systems ALTERNATIVE PROPORTIONAL JOYSTICK SYSTEMS: I10751 Mini-Joystick for Omni / IOM (9-pin connector) 3, E2312 Operating Force = 0.5 oz (13 g) Neutral to Full Deflection = 0.2" (5mm) I Compact Joystick for Omni / IOM (9-pin connector) 1, E2373 Operating Force = 7.8 oz (220 g) Neutral to Full Deflection = 1.1" (28mm) Joystick includes two 1/8" mono jacks for Mode and On/Off. Includes Standard Joystick Knob and 1.75" (42mm) Foam Ball Knob. I Compact Joystick LITE for Omni / IOM (9-pin conn) 1, E2373 Operating Force = 1.8 oz (50 g) Neutral to Full Deflection = 0.7" (17mm) Joystick includes two 1/8" mono jacks for Mode and On/Off. Includes Standard Joystick Knob and 1.75" (42mm) Foam Ball Knob. ALT PROPORTIONAL JOYSTICK MOUNTING HARDWARE: I Alt JS Swing Away Mount Kit - Armrest E1028 Mount in front of Left Arm: Mount in front of Right Arm: I Alt JS / Omni Combo Swing Away Mount Kit - Armrest E1028 Used to mount Omni and Alternative Proportional Joystick to the same armrest. Includes Swing Away Omni/Tablet Mount, with a longer mounting rod, two PERMOfix modules, one 3" rod and one 4" rod. Mount in front of Left Arm: Mount in front of Right Arm: I Alt JS Adjustable Mount Kit - Midline E1028 Mount on Left Arm: Mount on Right Arm: I Alt JS Adjustable Mount Kit - Chin Boom E1028 Swing-Away / Removable Chin Boom mounted on right of backrest shell. Custom charge may be applied if ordering lower backrest heights. I10752 Alt JS Adjustable Mount Kit - Haims Harness, Lrg E1028 For neck width up to 7½". I10753 Alt JS Adjustable Mount Kit - Haims Harness, Sml E1028 For neck width up to 5½". ALT PROPORTIONAL JOYSTICK ACCESSORIES: I Dual Switches for Compact Joystick - Fixed Mount K0108 Includes two pushbutton switches mounted on rigid arms. Switches can be used for Mode & On/Off. Switch operation force = 4.5oz (130 g) Mount at front of Joystick: Mount at rear of Joystick: Mount at left of Joystick: Mount at right of Joystick: I Dual Switches for Compact Joystick -Gooseneck Mount K0108 Includes two pushbutton switches mounted on adjustable gooseneck arms. Switches are positioned on Left and Right sides of Compact Joystick. Switches can be used for Mode & On/Off. Switch operation force = 4.5oz (130 g) SIP & PUFF SYSTEMS: Page 7 of 11

8 Alternative Drive Systems SIP & PUFF SYSTEMS: I10573 Sip & Puff System for Omni 1, E2325,E2326 Requires Omni Control Module. Cannot use this part with an Input Module. Includes breath tube kit. I10574 Sip & Puff System with Fiber Optic Opti-Stop 2, E2325,E2326 Requires Omni Control Module. Cannot use this part with an Input Module. Includes breath tube kit. I Sip & Puff Kit for Total Control Head Array E2325 For use with Total Control Head Array. Requires Omni Control Module. Cannot be used with an Input Module. Includes breath tube kit. I10762 Adjustable Mounting Hrdw - Sip & Puff E1028 Required when selecting PN I10573, I10574 or I PROPORTIONAL FOOT CONTROL: I10767 Proportional Foot Control 3, Mount on Left: Mount on Right: I10766 Adjustable Mounting Hrdw - Foot Control E1028 Required when selecting PN I Total Control Head Array CONFIGURE HEAD ARRAY: I Permobil Head Array - 3-Switch System 4, E2330 Features an occipital pad sensor and two stainless steel arms configured with proximity sensors. The arms are mounted to the upper attachment points on the head array. Longer arms are also included to extend the sensor adjustment range. ESP recommended. Choose Omni Control Module (ID51154IR) separately. I11072 Program Head Array as a 5-Switch System No Charge Select additional arms/sensors below and indicate the intended use of each sensor in the Notes & Comments section. Choose Omni Control Module (ID51154IR) or Input Module (I10581) separately. CHOOSE OCCIPITAL PAD SIZE (REQUIRED): I Small Occipital Pad for Head Array "W x 3"H No Charge I Large Occipital Pad for Head Array - 6"W x 4"H No Charge. CHOOSE OCCIPITAL MOUNT (REQUIRED): I10847 Fixed Mount for Head Array Occipital Pad No Charge I Adj. Swivel Mount for Head Array Occipital Pad K0108 Enables Occipital Pad to be angled up/down and left/right independent of the lateral arms. CHOOSE BACKREST MOUNTING HARDWARE (REQUIRED): I Stealth TWB480 Backrest Mounting Hdwr with Links E1028 Please select the length of the vertical stem below: Standard length (10"): Short length (6"): I Stealth TWB480 Backrest Mnt Hdwr with Flipback E1028 I Stealth HMO475 MultiAxis Backrest Mounting Hdwr E1028 I Stealth TWB480 Backrest Mnt Hdwr w SubOcptl Mount E1028 I Stealth 600 SubOccipital Pad - 8.5" W x 2.75" H K0108 Must select when PN I is ordered. SELECT ADDITIONAL LEFT ARM PACKAGE (OPTIONAL): I10976 Add Left Lateral Arm w Proximity Sensor K0108 Page 8 of 11

9 Total Control Head Array CONFIGURE HEAD ARRAY: I10977 Add Left Lateral Arm w Egg Switch K0108 I10978 Add Left Lateral Arm w Pad (No Sensor or Switch) K0108 SELECT ADDITIONAL RIGHT ARM PACKAGE (OPTIONAL): I10979 Add Right Lateral Arm w Proximity Sensor K0108 I10980 Add Right Lateral Arm w Egg Switch K0108 I10981 Add Right Lateral Arm w Pad (No Sensor or Switch) K0108 Alt Drive Systems Setup CHOOSE OMNI OR INPUT MODULE (REQUIRED): ID51154IR Omni Control Module for R-net w/ Infrared 1, Must also select mounting hardware, either I or I Please specify which type of alternative drive input you will be using if not ordering it from Permobil. Input Device: I Adjustable Swing-Away Hardware - Omni/Tablet E1028 Mount in front of Left Arm: Mount in front of Right Arm: I10581 Input Module (IOM) for R-net Control System 1, K0108 This device allows a proportional or switched drive input to be connected to an R-net Control System without the use of an Omni. It must be ordered in conjunction with an R-net Remote Joystick. It does NOT support any of the following input devices: Sip-n-Puff, 3-Switch / 4-switch Head Array or RIM control. CHOOSE MOUNTING POSITION OF SEAT CONTROL SWITCHBOX: I10080 Mount Seat Control Switchbox on Backrest No Charge Alt Drive Accessories PERMOFIX MOUNTING SOLUTIONS: I Proximity Sensor + Swivel Assembly K0108 Only available with the Total Control Head Array. Swivel assembly allows sensor to be mounted with PERMOfix or directly to lateral arm of Total Control Head Array. Since Proximity Sensors require power, they CANNOT be used as On/Off switches. I Egg Switch + Swivel Mount Assembly K0108 Swivel assembly allows switch to be mounted with PERMOfix or directly to lateral arm of Total Control Head Array. I Solid Oval Pad + Swivel Assembly K0108 Swivel assembly allows pad to be mounted with PERMOfix or directly to lateral arm of Total Control Head Array. I Oval Plate + Swivel Assembly - No Switch K0108 Blank plate provides mounting option for Micro Lite, Buddy Button or other switch options. Swivel assembly allows pad to be mounted with PERMOfix or directly to lateral arm of Total Control Head Array. I Micro Lite Switch Qty: I Buddy Button Qty: Page 9 of 11

10 Alt Drive Accessories I Egg Switch Black Qty: K0108 I Mini Cup Switch Qty: I Proximity Switch Qty: I Mini Joystick 5 Switch OC for Omni/IOM (9-pin) E2312 I Touch Contact with CR2032 Battery Qty: I10772 Dome Switch, Backrest Mnt w Gooseneck Qty: K0108 Mount on Left: Mount on Right: Mounts at top of backrest shell. Custom charge may be applied if ordering with short backrest heights Kit Includes: One PERMOfix joint with Flat Plate, two PERMOfix joints with 45 swivel adjustment, one 6" rod, one 8" rod and one 9" gooseneck switch with 50" cable and mounting clamp. I10846 Dome Switch, Backrest Swg Awy Mnt w Gsneck Qty: K0108 Mount on Left: Mount on Right: w 90 Swing-Away Function. Mounts at top of back. Custom charge applies if ordered with short back. Kit Includes: One PERMOfix joint with Flat Plate, one PERMOfix joint with 45 swivel adjustment, two 6" rods, one 90 Swing-Away joint, one 9" gooseneck switch w 50" cable and mounting clamp. I mm Ext. Cable for Sensor/Switch, 0.3m Long K0108 I mm Ext. Cable for Sensor/Switch, 1m Long K0108 I mm Ext. Cable for Sensor/Switch, 2m Long K0108 I mm Ext. Cable for Sensor/Switch, 3m Long K0108 I mm Y-splitter Cable for Sensor/Switch K0108 Allows two Proximity Sensors/Mechanical Switches to connect to the same direction jack. Page 10 of 11

11 Additional Order Instructions (for Permobil): Notes & Comments (not for Permobil): Chair Order Policy: You are highly encouraged to contact Permobil Sales with ANY questions regarding proper completion of our order forms at The order cannot be processed without the following: -A client name or code, the client s measurements, the client s weight -The order form must also be signed by a person authorized by your company to acknowledge the items selected. Permobil, Inc. is not responsible for configuration or size discrepancies resulting from customer errors on the order form. -Order confirmations will be provided by Permobil summarizing the items selected. Please review this carefully. -Once the order is shipped, any changes are subject to the returns policy and may be prohibited. Order Acknowledgement: I,, am an agent of the medical equipment provider named on this order form and I have the authority to contract for the purchase of powered wheelchairs and related parts on behalf of said provider. I acknowledge that I have reviewed this order and that it is complete and accurate to the best of my knowledge. I further acknowledge that any changes to this order after submission of this order form are subject to the returns policy and may carry additional charges. Signed: Printed Name: Title: Date: NOTE: All specifications and prices are subject to change without notice. Please note that prices displayed are only valid if ordered with the wheelchair. Any parts ordered for service or future alterations will carry different pricing and warranty. The HCPCS codes provided are not intended to be billing or legal advice, rather our interpretation of the code definitions. Use of the codes does not ensure coverage or payment for the item. For coverage information, verify the policy of the appropriate payer. Page 11 of 11