Industrial PLC System

Transcription

1 Pre-production datasheet - The producer retains the right to change any technical parameters without previous written notice EN IEC 6- GSM LAN COM DI AI RE AO DO PLC with port switch PLC with GSM Port IO module v s are Linux based PLCs with support for writing user scripts v COM-IO modules support Modbus, M-BUS, RS8, RS, -Wire and other standards v IO modules support a wide variety of analog I/O, digital I/O and relays outputs v IEC 6- IDE and graphical SIMULand GUI for industrial and security applications v High security is assured by SSH, openvpn, SNMPv, 80X and other tools used by IT experts v Highly durable hardware with integrated overvoltage protections v Operating temperatures from C to 70 C Typical Applications of the System INDUSTRIAL AUTOMATION MIOS- or MODBUS IO modules and sensors allow for the monitoring and controlling of environment variables according to specified requirements A wide range of inputs / outputs are available directly in s DI AI RE AO DO GSM CONNECTIVITY Measured values and alarms are available online and they can be also sent via or SMS messages SMART METERING s can remotely collect values of power, water and gas meters APP PLUGINS Custom-made plugins integrate with rd party security & automation systems RS versatility PROCESS VISUALIZATION s can be easily integrated in rd party systems via SNMP and EN protocols IP CCTV SYSTEMS s are able to control IP cameras via ONVIF protocol and process images IP WATCHDOG Integrated IP Watchdogs monitor the availability of IP devices In the event of a problem an automatic restart SNMP, or SMS message will be triggered OFF THE GRID SYSTEMS s are designed to be efficient and are optimized for off-the-grid security or automation systems powered from renewable energy systems Pre-production datasheet - The producer retains the right to change any technical parameters without previous written notice wwwmeteleu /7 wwwiplogeu

2 Pre-production datasheet - The producer retains the right to change any technical parameters without previous written notice EN IEC 6- Hardware Programmable logic controllers have an outstanding modular design IO Module IO Connector COM IO Module Power Input COM IO Module Motherboard IO Connector Software s and their IO modules are suitable for a wide variety of applications from industrial automation to building automation and applications in security systems s can be configured in three different ways GUI SIMULandv for Easy Setup SIMULandv software is a very useful tool especially in situations where you need to quickly configure a simple system without knowledge of IEC or script programming Its main advantages are: v Graphical user interface v CHAT client with technical support v VPN client for remote help SSH Console for IT Experts COM-IO Slot IEC 6- IDE for Automation Professionals USB-A USB-B LAN and GSM Ports CPU Module COM-IO Slot s are Linux based PLCs Their large memory is available for user applications PLCs are delivered with a standard set of tools The user can download additional packages from repositories s can be programmed via scripts: Bash, PHP, Python IDE allows you to write code in any of the supported IEC-6- control languages: v Ladder diagram (LD) v Function block diagram (FBD) v Structured text (ST) v Instruction list (IL) Pre-production datasheet - The producer retains the right to change any technical parameters without previous written notice wwwmeteleu /7 wwwiplogeu

3 Pre-production datasheet - The producer retains the right to change any technical parameters without previous written notice Available Motherboards EN IEC 6- -G with CPU module -G with CPU module -G Motherboards provide PLC connectivity via LAN and GSM / GPRS interfaces In addition, the Motherboards are equipped with other important interfaces for interconnection with COMmunication and IO modules The full list of the available interfaces are listed in the table below: INTERFACE -G -G -G SURGE PROTECTION NOTE Power Input 600 W (0/000 µs) CPU Module Interface - Ethernet 0/00BASE-T 0 A (0/000 µs) IEC GSM/GPRS 0 (G/G) (G/G/G) - G: x SIM holder USB-A, Max 00mA ± kv IEC USB-B Local programming console COM IO Module Interface - IO Module Interface - Power Supply Input PARAMETER VALUE NOTE Quantity Twin screw terminals Power Consumption 0(0) to 60 VDC () AIx models G: W G: W* G: W* *The reported values are an average among all bands The modern design of the switching supplies allows the powering of units in a wide range of input voltages s can be powered directly from batteries because power supplies are automatically disabled when the input voltage is below 0V CPU Module Interface CPU module interface is compatible with G and newer models of CPU modules Modules are based on a CORTEX A ARM microprocessor running on a Linux embeded OS The module has an operating temperature range from to 70 C and contains storage space of 8MB FLASH and 6MB RAM for customer applications MB RAM SD card CPU CORTEX 6 MB NOR RTC 6 MB NAND TFT interface Pre-production datasheet - The producer retains the right to change any technical parameters without previous written notice wwwmeteleu /7 wwwiplogeu

4 Pre-production datasheet - The producer retains the right to change any technical parameters without previous written notice Available Motherboards EN IEC 6- Ethernet ports PARAMETER VALUE NOTE Quantity / G / G, G Connectors Shielded RJ Data Speed 0/00BaseT AutoMDI-MDIX Yes Auto-Negotiation Yes Protocols VLAN, QoS, RSTP, IGMP GSM/GPRS port PARAMETER VALUE NOTE Quantity 0 / G / G, G Connectors SMA Freq Bands G 900 / 800 MHz Freq Bands G 900 / 00 MHz Freq Bands G 800 / 800 / 600 MHz Data Connectivity GPRS, EDGE, UMTS, HSDPA SIM Slot microsim USB ports PARAMETER USB-A USB-B Standard USB 0 USB 0 Mode USB host USB device Function External storage Local management Protection Transil Transil Output Current Max 00 ma - COM IO Module Interface IO Module Interface -G series include port ethernet managed switches with support for: RSTP - redundant LAN connection QoS - packets can be processed in accordance with the assigned priorities VLAN - splitting of data into virtual networks -G and -G series include ethernet suitable for communication with locally connected peripheries -G and -G series are equipped with a wireless GSM/ GPRS module It can be used for: v Data collection from distant objects v Sending and receiving SMS v Firmware upgrade The wireless module can be shut down, if required as a maximum energy-saving option s PLCs are equipped with USB-A and USB-B connectors which are in accordance with the USB 0 standard The basic ways of using the USB ports are the following: Connection of remote mass storage can in the USB host mode use external USB mass storage as additional memory for storing or reading data Local secured management for security purposes remote management can be prohibited In such situations the local USB console can be used Within this interface is the possibility to assemble any type of COM IO modules listed on the following pages Modules can be assembled / dissasembled only when the motherboard is disconnected from the power supply After connection to the input power, a new COM lo module is automatically detected and available COM channels and inputs/ outputs are accessed in the configuration software Within this interface is the possibility to assemble any type of lo modules together with any other COM-IO modules listed on the following pages Modules can be assembled / dissasmbled only when the motherboard is disconnected from the power supply After connection the input power a new IO module is automatically detected and available inputs/outputs are accessed in the configuration software Pre-production datasheet - The producer retains the right to change any technical parameters without previous written notice wwwmeteleu /7 wwwiplogeu

5 Pre-production datasheet - The producer retains the right to change any technical parameters without previous written notice LAN GPRS DI V DI V DI 0V AI - U/I AI - RTD BI (alarm) / DI RE - NO-0V RE - NOC RE - NOC-0V AO BO DO (SSR) OC NPN PUSH / PULL -G Ordering Information EN IEC 6- When ordering it is necessary to indicate the correct name of the device which is governed by the following rules: v s marking depends on the motherboard, IO module, COM-IO modules and CPU modules used The control units are designed in such a way that the modules can be changed at any time Any new module is then automatically detected and available for use v All IO modules can be used as s subboards or as standalone modules connected via the RS8 v The control units are designed in such a way that the COM or COM-IO modules can be changed at any time A new module is then automatically detected and available for use The nd option in ordering is to indicate the order code of the device Available Modifications -G PRODUCT NAME CODE COM -G-xx xx xx G-xx-DI8-yy xx-0yy - xx yy G-xx-AI8-yy xx-0yy - xx yy G-xx-AI-yy xx-0yy - xx yy G-xx-BI8-yy xx-0yy - xx yy G-xx-RE8-yy xx-0yy - xx yy G-xx-AO8-yy xx-06yy - xx yy G-xx-PP8-yy xx-07yy - xx yy G-xx-BO8-yy xx-08yy - xx yy The symbols used xx and yy replace the assembled version of the COM IO modules Application Example: as control unit integrating security systems and visualization -G-0-BO8 - forwards alarms from perimeter system Peridect To rd party alarm panels (relay or resistive outputs) or to visualization softwares with SNMPv support CUP TCP Visualization SNMPv Alarm panel Alarm loops Pre-production datasheet - The producer retains the right to change any technical parameters without previous written notice RS8 wwwmeteleu /7 wwwiplogeu

6 Pre-production datasheet - The producer retains the right to change any technical parameters without previous written notice LAN GPRS DI V DI V DI 0V AI - U/I AI - RTD BI (alarm) / DI RE - NO-0V RE - NOC RE - NOC-0V AO BO DO (SSR) OC NPN PUSH / PULL -G Ordering Information EN IEC 6- When ordering it is necessary to indicate the correct name of the device which is governed by the following rules: v s marking depends on the motherboard, IO module, COM-IO modules and CPU modules used The control units are designed in such a way that the modules can be changed at any time Any new module is then automatically detected and available for use v All IO modules can be used as s subboards or as standalone modules connected via the RS8 v The control units are designed in such a way that the COM or COM-IO modules can be changed at any time A new module is then automatically detected and available for use The nd option in ordering is to indicate the order code of the device Available Modifications -G PRODUCT NAME CODE COM -G-xx-DI8-yy 6xx-0yy xx yy G-xx-AI-yy 6xx-0yy xx yy G-xx-RE8-yy 6xx-0yy xx yy G-xx-PP8-yy 6xx-07yy xx yy Application Example: -G-07G-DI8 as a centralized distribution of beverages v The s with IO modules are installed in each warehouse with beverages tanks v Filling and pumping of beverages is centrally recorded v Suppliers and customers authenticate themselves using Ibutton readers -G-xx 6xx-0000 xx G-xx-AI8-yy 6xx-0yy xx yy G-xx-BI8-yy 6xx-0yy xx yy G-xx-AO8-yy 6xx-06yy xx yy G-xx-BO8-yy 6xx-08yy xx yy The symbols used xx and yy replace the assembled version of the COM IO modules -Wire RS8 Fl Fl Fl Fl Pre-production datasheet - The producer retains the right to change any technical parameters without previous written notice wwwmeteleu 6/7 wwwiplogeu

7 Pre-production datasheet - The producer retains the right to change any technical parameters without previous written notice LAN GPRS DI V DI V DI 0V AI - U/I AI - RTD BI (alarm) / DI RE - NO-0V RE - NOC RE - NOC-0V AO BO DO (SSR) OC NPN PUSH / PULL -G Ordering Information EN IEC 6- When ordering it is necessary to indicate the correct name of the device which is governed by the following rules: v s marking depends on the motherboard, IO module, COM-IO modules and CPU modules used The control units are designed in such a way that the modules can be changed at any time Any new module is then automatically detected and available for use v All IO modules can be used as s subboards or as standalone modules connected via the RS8 v The control units are designed in such a way that the COM or COM-IO modules can be changed at any time A new module is then automatically detected and available for use The nd option in ordering is to indicate the order code of the device Available Modifications -G PRODUCT NAME CODE COM SLOT -G-xx-DI8-yy 7xx-0yy xx yy G-xx-AI-yy 7xx-0yy xx yy G-xx-RE8-yy 7xx-0yy xx yy G-xx-PP8-yy 7xx-07yy xx yy Application Example: in the OFF-THE-GRID security application -G-xx 7xx-0000 xx G-xx-AI8-yy 7xx-0yy xx yy G-xx-BI8-yy 7xx-0yy xx yy G-xx-AO8-yy 7xx-06yy xx yy G-xx-BO8-yy 7xx-08yy xx yy The symbols used xx and yy replace the assembled version of the COM IO modules -G-0-BI the diagram shows the protection of a vineyard in the DEMO system in Česká Skalice (Czech Republic) The main goal of the system is to secure and automate the area without any electricity The main functions are: v In the situation when some PIR sensor detects movemnet, the camera is turned towards this sensor in an alarm state and starts recording v During the night the PLC automatically turns on the IR lights v Disturbs the birds eating grapes by randomly playing pre-recorded sounds v The perimeter system is guarded by a fence MPPT Power Module PoE Injector GSM PLC Pre-production datasheet - The producer retains the right to change any technical parameters without previous written notice wwwmeteleu 7/7 wwwiplogeu

8 Pre-production datasheet - The producer retains the right to change any technical parameters without previous written notice IO modules Ordering Information EN IEC 6- IO modules as seen in the table below can be assembled on motherboards or used as standalone IO modules connected via the MIOS- RS8 bus to PLC All modules have an operating temperature range from to 70 C Marking Standalone IO Modules Marking -G-0G-DI8-0 I I I I I COM IO module I I I I I in slot (if used) I I I I IO module (if used) I I I COM IO module I I I in slot (if used) I I MOTHERBOARD I CPU module Available IO Modules IO Module CONNECTOR A GALVANIC SEPARATION DI8-0G I I COM IO module (if used) I IO module Communication Channels * Digital Inputs V Digital Inputs V YES Digital Inputs 0 V YES Analog -bit U/I Inputs YES Analog - Wire RTD Inputs YES bit Alarm / Digital Inputs V Relay Outputs TYPE - NO 0 V YES Relay Outputs TYPE - NOC YES Relay Outputs TYPE - NOC 0 V YES Analog Outputs -bit Analog / Alarm 8-bit Outputs Digital SSR Outputs YES Open Collectors NPN Open Collectors - PUSH-PULL** YES *see communication modules spec ** programmable as NPN or PNP COM IO Module in Slot IO Module Inside IO Module CONNECTORS A and D NOTE Pre-production datasheet - The producer retains the right to change any technical parameters without previous written notice wwwmeteleu 8/7 wwwiplogeu

9 Pre-production datasheet - The producer retains the right to change any technical parameters without previous written notice COM-IO Modules Ordering Information EN IEC 6- s connectivity is ensured with IF modules They are designed to fit into the COM interfaces Channel and Channel Their design is very flexible The COM module inserted into the slot is automatically detected by firmware and it can be at anytime exchanged for another Modules have an operating temperature range from to 70 C excluding audio modules IF-06 which have an operating range from to 70 C MODULE CODE INTERFACES GALVANIC MAX MAXCABLE TERMINALS ISOLATION BITRATE LENGTH IF x RS8 - Mbps 00 m A -B -B A IF-0G x RS8 kv Mbps,00 m A -B -B A IF x RS - Mbps m RX TX RX* TX* IF-0G x RS kv Mbps m RX TX RX* TX* IF RF M-BUS, RF KNX - TBD** IF-0G DALI kv kbps 00 m DALI -DALI DALI -DALI IF x RS8, x DI - Mbps,00 m A -B IN IN IF MIC, LINE-IN/OUT - - LINE IN - - LINE OUT IF-07G x RS8, -Wire kv Mbps/-,00 m/00m A -B -Wire IF-08G Profibus kv Mbps,00 m A A B B IF M-BUS - 96 kbps 0 m BUS BUS -BUS -BUS IF KNX kv 96 kbps,000 m BUS BUS -BUS -BUS IF Wiegand, xdi m DATA 0 DATA IN IN * Or CTS/RTS signals **To Be Determined Module Connection / Disconnection COM IO Module Assembled on the Motherboard Standalone COM IO Module COM-IO Slot COM-IO Slot COM-IO modules can be delivered as: v Part of ordered PLC v Standalone modules In case of standalone module delivery it is necessary to unscrew the device housing and insert the module into the slot Inserting or removing should be done only when the device is disconneted from the power source After connecting the power supply, the CPU automatically updates list of available COM channels, inputs and outputs & COM-IO modules can be inserted into COM slots on motherboards or IO modules Pre-production datasheet - The producer retains the right to change any technical parameters without previous written notice wwwmeteleu 9/7 wwwiplogeu

10 Pre-production datasheet - The producer retains the right to change any technical parameters without previous written notice ± ± ± ± ± ± RELAYS ANALOG INPUTS DEVICE ORDERING AI8 Module of Analog -bit U/I Inputs EN IEC 6- v 8x -bit Analog U/I Inputs v x NOC V Relay Outputs v x NO 0V Relay Outputs v x Slot for COM IO Module v Operating Range C to 70 C v 600 W Integrated Surge Protections DIN installation Flat surface installation Power Supply 0 to 60 VDC Max TBD* W Operational Range 0 to 70 C Humidity Max 9 % -condensing Dimension x 0 x 9 mm W x H x D Weight TBD* kg Surge Protection 600 W 0/000 µs Installation DIN or flat surface Voltage Ranges ±V, ±V, ±0V 0V to V, 0V to 0V Current Ranges 0 to 0mA, to 0mA Sampling Rate 0 ksps Adaptive Resolution -bit Yes Surge Protection 600 W 0/000 µs SWITCHING HV RELAYS Type Contact Type NO rmal open Max Load A / 0 VAC Resistive load A / 0 VDC Resistive load Lifetime 00,000 operations CHANGEOVER RELAYS Type Max Load 0 A at 0 VAC Resistive load A at VDC Resistive load Lifetime,000,000 operations *To Be Determined wwwiplogeu NAME CODE NOTE AI x RS8 AI8-0G x RS8 (isolated) AI8-07G RS8 -Wire (isolated) For a full range of interfaces please see wwwiplogeu Auxiliary PE/ terminals VDC 0 VAC L N HV NO COM 0 HV NO 9 COM 8 NC 7 COM 6 NO NC COM NO - - RELAYS 0 A / 0 VAC A / VDC CONN ECTOR A RELAYS A / 0 VAC A / 0 VDC CONN ECTOR C ANALOG INPUTS Voltage: ± V, ± V, ±0 V, 0 - V, 0-0V Current: 0-0mA, - 0mA A AI 8 AI 7 0 AI 6 9 AI 8 A 7 AI 6 AI AI AI PE Any combination of the voltage or current modes 0 to 60 VDC PE VIN 0-60 V DC CONN ECTOR B CONN ECTOR D CONN ECTOR E To next module MODEL: AI8-yy CODE: 000-0yy RS8, -Wire For complete information about COM modules please see wwwiplogeu Galvanic isolation Pre-production datasheet - The producer retains the right to change any technical parameters without previous written notice wwwmeteleu 0/7 wwwiplogeu

11 Pre-production datasheet - The producer retains the right to change any technical parameters without previous written notice SSR OUTPUTS DIGITAL INPUTS V ANALOG INPUTS DEVICE ORDERING AI Module of Analog - Wire RTD Inputs EN IEC 6- v x -bit Analog RTD Inputs v x SSR Outputs v x V Digital Inputs v x Slot for COM IO Module v Operating Range C to 70 C v 600 W Integrated Surge Protections DIN installation Flat surface installation Power Supply 0 to 60 VDC Max TBD* W Operational Range 0 to 70 C Humidity Max 9 % -condensing Dimension x 0 x 9 mm W x H x D Weight TBD* kg Surge Protection 600 W 0/000 µs Installation DIN or flat surface Input Resistance > 0 kω Resistive Ranges PT00, PT000, Ni000 Modes -wire, -wire Sampling Rate ksps Selectable Resolution -bit Yes Surge Protection 600 W 0/000 µs Isolation Voltage 70 Vrms Optocoupler DC - AC Log 0: V to V Log : 6 V to 0 V Max 0 V / s Input Current 6 ma at VDC Delay log0 Max 00μs Switching Frequency Max TBD* Hz : duty Output Type MOSFET Load Voltage Rating 7 VAC to 6 VAC Load Current Rating A Contact Form: SPST ( Form A) *To Be Determined NAME CODE NOTE AI x RS8 AI-0G x RS8 (isolated) AI-07G RS8 -Wire (isolated) For a full range of interfaces please see wwwiplogeu wwwiplogeu VDC AIN A AIN AIN A 6 AIN 7 AIN 8 or -wire RTDs 0 VAC L N DI DI DI DI - V DIG INPUTS Log 0: -0 to V Log : 6 to 0 V SSR SSR - - CONN ECTOR A A 9 SSR SSR CONNECTOR C -BIT ANALOG RTD INPUTS Modes: -wire or -wire, Sampling: ksps RTD IN RTD IN RTD IN RTD IN AIN SSR OUTPUTS 7 to 6 VAC Max A AIN 0 AIN COM - A 0 to 60 VDC PE VIN 0-60 V DC CONNECTOR B CONNECTOR D CONNECTOR E To next module MODEL: AI-yy CODE: 000-0yy RS8, -Wire For complete information about COM modules please see wwwiplogeu Galvanic isolation Pre-production datasheet - The producer retains the right to change any technical parameters without previous written notice wwwmeteleu /7 wwwiplogeu

12 Pre-production datasheet - The producer retains the right to change any technical parameters without previous written notice RELAYS NPN OUTPUTS DIG INPUTS V ALARM / INPUTS V DEVICE ORDERING BI8 Module of 8-bit Alarm / Digital V Inputs EN IEC 6- v 8x 8-bit Alarm / Digital V Inputs v x Digital V Inputs v x NOC V Relay Output v x Open Collector NPN Outputs v x Slot for COM IO Module v Operating Range C to 70 C v 600 W Integrated Surge Protections DIN installation Flat surface installation Power Supply 0 to 60 VDC Max TBD* W Operational Range 0 to 70 C Humidity Max 9 % -condensing Dimension x 0 x 9 mm W x H x D Weight TBD* kg Surge Protection 600 W 0/000 µs Installation DIN or flat surface Digital Mode Log0: 0V to 08V or 0 to 00Ω Log: V to V or > 0kΩ Analog Mode 00 to 0,000 Ω 8 ranges Max 7 VDC Digital Mode Log0: 0V to 08V or 0 to 00Ω Log: V to V or > 0kΩ Max 7 VDC Output Type NPN Maximum Load 6V / 0 A CHANGEOVER RELAYS Type Max Load 0 A at 0 VAC Resistive load A at VDC Resistive load Lifetime,000,000 operations *To Be Determined NAME CODE NOTE BI x RS8 BI8-0G x RS8 (isolated) BI8-07G RS8 -Wire (isolated) For a full range of interfaces please see wwwiplogeu Auxiliary output VDC, 00 ma wwwiplogeu VDC IN 0 9 IN 8 IN 7 BI 6 BI BI BI VCC OC O U T ALARM / V INPUTS Max 7 VDC 00 to 0000 ALARM / V INPUTS Max 7V DC 00 to CONN ECTOR A CONN ECTOR C DIGIT V INPUTS Log 0: 0 V to 08V Log : V to V NPN RELAY OUTPUT A/VDC 6V / 0A NC COM NO 0 9 OC 8 OC 7 BI 8 6 BI 7 BI 6 BI VDC 0 to 60 VDC PE VIN 0-60 V DC CONN ECTOR B CONN ECTOR D CONN ECTOR E To next module MODEL: BI8-yy CODE: 000-0yy RS8, -Wire For complete information about COM modules please see wwwiplogeu Galvanic isolation Pre-production datasheet - The producer retains the right to change any technical parameters without previous written notice wwwmeteleu /7 wwwiplogeu

13 Pre-production datasheet - The producer retains the right to change any technical parameters without previous written notice DIGITAL INPUTS 0 V RELAYS DEVICE ORDERING RE8 Module of Relay Outputs EN IEC 6- v 8x NO 0V relay v x optically separated 0V inputs v x NOC 0V relay v x Slot for COM IO Module v Operating range C to 70 C v 600 W integrated surge protections DIN installation Flat surface installation Power Supply 0 to 60 VDC Max TBD* W Operational Range 0 to 70 C Humidity Max 9 % -condensing Dimension x 0 x 9 mm W x H x D Weight TBD* kg Surge Protection 600 W 0/000 µs Installation DIN or flat surface SWITCHING HV RELAYS Type Max Load A / 0 VAC Resistive load Lifetime A / 0 VDC Resistive load 00,000 operations CHANGEOVER HV RELAYS Type Rated Current 0 A Peak A Rated Load AC Max 00 VA Rated Load AC Max 00 VA 0 V AC -phase Motor rating Max 07 kw 0 V AC DC Breaking capacity 0/0/0 0/0/0 VA Isolation Voltage 70 Vrms Optocoupler Max Log 0: max 0 V AC Log : min 00 V AC Max 0 V AC / s Input Current Typ 6 ma at log Delay log0 *To Be Determined Typ 0 ms Galvanic isolation NAME CODE NOTE RE x RS8 RE8-0G x RS8 (isolated) RE8-07G RS8 -Wire (isolated) For a full range of interfaces please see wwwiplogeu wwwiplogeu 0 V N L 0VAC L N 0VAC L N HV NO HV NO HV NO HV NO - - RELAYS A / 0 VAC A / 0 VDC 0 V RELAYS Rated Current: 0 A Peak: A COM - CONN ECTOR A CONNECTOR C HV NO6 HV NO HV NO8 HV NO7 COM -8 DIGITAL INPUTS 0V Log 0: Max 0 VAC Log : 00-0 VAC HV IN HV IN HV IN 0 HV IN 9 HV IN 8 HV IN 7 HV NC0 6 COM 0 HV NO0 HV NC 9 COM 9 HV NO9 PE VIN 0-60 V DC CONNECTOR B CONNECTOR D CONN ECTOR E 0 to 60 VDC To next module MODEL: RE8-yy CODE: 000-0yy RS8, -Wire For complete information about COM modules please see wwwiplogeu L L L N Pre-production datasheet - The producer retains the right to change any technical parameters without previous written notice wwwmeteleu /7 wwwiplogeu

14 Pre-production datasheet - The producer retains the right to change any technical parameters without previous written notice POWER DIGITAL INPUT V ANALOG INPUTS ANALOG OUTPUTS DEVICE ORDERING AO8 Module of -bit Analog Outputs EN IEC 6- v 8x -bit Analog Outputs v x -bit Analog U/I Inputs v x Digital V Inputs v x Slot for COM IO Module v Operating range C to 70 C v 600 W integrated surge protections DIN installation Flat surface installation Power Supply 0 to 60 VDC Max TBD* W Operational Range 0 to 70 C Humidity Max 9 % -condensing Dimension x 0 x 9 mm W x H x D Weight TBD* kg Surge Protection 600 W 0/000 µs Installation DIN or flat surface Voltage Ranges 0V to V, 0V to 0V, ± 0V Output current Max 0 ma Sampling Rate 00 ksps Resolution -bit Surge Protection 600 W 0/000 µs Voltage Ranges ±V, ±V, ±0V 0V to V, 0V to 0V Current Ranges 0 to 0mA, to 0mA Sampling Rate 0 ksps Adaptive Resolution -bit Yes Surge Protection 600 W 0/000 µs Isolation Voltage 70 Vrms Optocoupler Log 0: V to V Log : 6 V to 0 V Max 0 V / s Input Current 6 ma at VDC Delay log0 Max 00μs Switching Frequency Max 00Hz : duty Output Type Max 00 ma Protection Diode polyswitch *To Be Determined NAME CODE NOTE AO x RS8 AO8-0G x RS8 (isolated) AO8-07G RS8 -Wire (isolated) For a full range of interfaces please see wwwiplogeu Any combination of the voltage or current modes wwwiplogeu 0-0V ± ± ± ± Galvanic isolation VDC VOUT 0 9 DI 8 DI 7 DI 6 DI A AI AI AI AI ANALOG INPUTS ±0 V, 0V to 0V 0() to 0mA CONN ECTOR C -BIT ANALOG OUTPUTS Voltage Ranges: 0 V to V, 0 V to 0 V, ±0 V Max Load: 0mA, Sampling Rate: 00 ksps PE AO 8 AO 7 AO 6 AO A AO AO AO AO G Y G Y G Y G Y G Y G Y G Y G Y 0-0V CONN ECTOR A 0-0V DIG V INPUTS Log 0: -0 V - V Log : 6V - 0 V 0-0V 0-0V POWER Max 00 ma 0-0V 0-0V PE VIN 0-60 V DC CONN ECTOR B CONN ECTOR D CONN ECTOR E 0 to 60 VDC To next module RS8, -Wire For complete information about COM modules please see wwwiplogeu 0-0V MODEL: AO8-yy CODE: yy Pre-production datasheet - The producer retains the right to change any technical parameters without previous written notice wwwmeteleu /7 wwwiplogeu

15 Pre-production datasheet - The producer retains the right to change any technical parameters without previous written notice RELAY ALARM / V INPUTS DIGITAL INPUTS V PUSH-PULL OUTPUTS DEVICE ORDERING PP8 Module of PUSH-PULL Outputs EN IEC 6- v 8x PUSH-PULL Transistor Outputs v x V Digital Inputs v x 8-bit Alarm / Digital V Inputs v x NOC V Relay Outputs v x Slot for COM IO Module v Operating Range C to 70 C v 600 W Integrated Surge Protections DIN installation Flat surface installation Power Supply 0 to 60 VDC Max TBD* W Operational Range 0 to 70 C Humidity Max 9 % -condensing Dimension x 0 x 9 mm W x H x D Weight TBD* kg Surge Protection 600 W 0/000 µs Installation DIN or flat surface Output Type PUSH-PULL Shortcut Protection Yes - polyswitch Maximum Load 0 V / A Max Switching Freq 0 khz Isolation Voltage 70 Vrms Optocoupler DC - AC Log 0: V to V Log : 6 V to 0 V Max 0 V / s Input Current 6 ma at VDC Delay log0 Max 00μs Switching Frequency Max TBD* Hz : duty Digital Mode Log0: 0V to 08V or 0 to 00Ω Log: V to V or > 0kΩ Analog (Alarm) Mode 00 to 0,000 Ω 8 ranges Max 7 VDC CHANGEOVER RELAYS Type Max Load 0 A at 0 VAC Resistive load A at VDC Resistive load Lifetime,000,000 operations NAME CODE NOTE PP x RS8 PP8-0G x RS8 (isolated) PP8-07G RS8 -Wire (isolated) For a full range of interfaces please see wwwiplogeu wwwiplogeu PP 8 0 PP 7 9 PP 6 8 PP 7 V -8 6 PP PP PP PP V - PUSH-PULL OUTPUTS Max 0V / A Programmable: NPN / PNP CONN ECTOR A CONN ECTOR C DIG V INPUTS ALARM / V Log 0: -0 V - V INPUTS Log : 6 V - 0 V NC COM NO 0 9 BI 8 BI 7 BI 6 DI DI DI DI VDC RELAY 0A/0VAC A/ VDC VDC PUSH PULL OUTPUTS MAX 0 VDC PE VIN 0-60 V DC CONN ECTOR B CONN ECTOR D CONN ECTOR E 0 to 60 VDC To next module MODEL: PP8-yy CODE: yy RS8, -Wire For complete information about COM modules please see wwwiplogeu Galvanic isolation Pre-production datasheet - The producer retains the right to change any technical parameters without previous written notice *To Be Determined wwwmeteleu /7 wwwiplogeu

16 Pre-production datasheet - The producer retains the right to change any technical parameters without previous written notice POWER RELAYS PUSH-PULL OUTPUTS DIGITAL INPUTS V DEVICE ORDERING DI8 Module of Digital V Inputs EN IEC 6- v 8x V Digital Inputs v x NO 0V Relay Outputs v x PUSH-PULL Transistor Outputs v x Slot for COM IO Module v Operating Range C to 70 C v 600 W Integrated Surge Protections DIN installation Flat surface installation Power Supply 0 to 60 VDC Max TBD* W Operational Range 0 to 70 C Humidity Max 9 % -condensing Dimension x 0 x 9 mm W x H x D Weight TBD* kg Surge Protection 600 W 0/000 µs Installation DIN or flat surface Isolation Voltage 70 Vrms Optocoupler DC - AC Log 0: V to V Input Current Delay log0 SWITCHING HV RELAYS Type Contact Type NO rmal open Max Load A / 0 VAC Resistive load Lifetime Log : 6 V to 0 V Max 0 V / s 6 ma at VDC Max 00μs Switching Frequency Max TBD* Hz : duty Output Type Shortcut Protection Maximum Load Max Switching Freq NPN / PNP / PUSH-PULL Software selectable Yes - polyswitch 0 V / TBD* ma TBD* A / 0 VDC Resistive load 00,000 operations Output Type Protection *To Be Determined Max 00 ma Diode polyswitch Max 0 VDC NAME CODE NOTE DI x RS8 DI8-0G x RS8 (isolated) DI8-07G RS8 -Wire (isolated) For a full range of interfaces please see wwwiplogeu VDC OUTPUTS PUSH PULL PWM VDC L N 0 VAC VIN current limited (polyswitch) output 0 to 60 VDC To next module RS8, -Wire For complete information about COM modules please see wwwiplogeu Galvanic isolation wwwmeteleu 6/7 wwwiplogeu Pre-production datasheet - The producer retains the right to change any technical parameters without previous written notice

17 Pre-production datasheet - The producer retains the right to change any technical parameters without previous written notice INx INx INx INx RELAY NPN OUTPUTS ALARM / V INPUTS ALARM OUTPUTS INx INx INx INx DEVICE ORDERING BO8 Module of Analog / Alarm 8-bit Outputs EN IEC 6- v 8x Alarm Outputs 8-bit v x 8-bit Alarm / Digital V Inputs v x Open Collector NPN Outputs v x NOC V Relay Output v x Slot for COM IO Module v Operating Range C to 70 C v 600 W Integrated Surge Protections DIN installation Flat surface installation Power Supply 0 to 60 VDC Max TBD* W Operational Range 0 to 70 C Humidity Max 9 % -condensing Dimension x 0 x 9 mm W x H x D Weight TBD* kg Surge Protection 600 W 0/000 µs Installation DIN or flat surface Output Type 8 bit 6 steps Resistive Range 00 to 0,000 Ω Accuracy ± 0 % Temp Dependence 0 ppm Digital Mode Log0: 0V to 08V or 0 to 00Ω Log: V to V or > 0kΩ Analog (Alarm) Mode 00 to 0,000 Ω 8 ranges Max 7 VDC Output Type NPN Maximum Load 6V / 0 A CHANGEOVER RELAYS Type Max Load 0 A at 0 VAC Resistive load A at VDC Resistive load Lifetime,000,000 operations *To Be Determined wwwiplogeu NAME CODE NOTE BO x RS8 BO8-0G x RS8 (isolated) BO8-07G RS8 -Wire (isolated) For a full range of interfaces please see wwwiplogeu Alarm Panel Alarm Panel VDC BLI 0 9 BLI 8 BLI 7 BO 6 BO BO BO - ALARM OUTPUTS 8-bit, 6 Steps 00 to CONN ECTOR A CONN ECTOR C ALARM OUTPUTS NPN 8-bit, 6 Steps OUTPUT 00 to OUTPUT 6V/0 A 6V / BO 8 BO 7 BO 6 BO 0A ALARM / V IN Max 7V DC 00 to OC OC RELAY 0A-0VAC A/V DC NC COM NO V PE VIN 0-60 V DC CONN ECTOR B CONN ECTOR D CONN ECTOR E 0 to 60 VDC To next module MODEL: BO8-yy CODE: yy RS8, -Wire For complete information about COM modules please see wwwiplogeu Galvanic isolation Pre-production datasheet - The producer retains the right to change any technical parameters without previous written notice wwwmeteleu 7/7 wwwiplogeu