Duris S family of SCOBs LES 13

Transcription

1 Duris S family of SCOBs LES 13 ILO-05FFx-13xx-xP211. SCOB - a series of PCBA s utilising Osram DURIS S family LEDs to create COB equivalent lighting sub-assemblies Product Overview The SCOB range of products from ILS, utilise the very latest multi-chip devices from Osram Opto Semiconductor The Duris S5, S8 and S10. These new LEDs enable a very flexible, powerful light source design, allowing simple optics design and flexibility to fit various accessories. The combination of small light-emitting surface and high lumen package provides excellent optical control and very narrow angle design. The SCOB family are based on the industry standard Zhaga footprints, enabling the device to utilise all the existing industry standard connectors, reflectors and heat sinks. Utilising these very latest chip designs, SCOBs offer an unparalleled range of colour temperatures, CRI options, forward voltage and drive current configurations. SCOBs are compact, powerful LED light sources built on aluminium substrates for optimal thermal management. With this unique approach to SCOB design we are also able to offer mixed colour temperatures and single colour versions of our SCOB family. The ILO-05FFx-13xx-xP211. family of products is available as 5 Osram Duris S8 s all in parallel, enabling us to offer 5 voltage groups and 2 CRI groups, min 80 CRI and min 90 CRI. Applications z Retrofit Bulbs z Downlights z Spotlights z Residential z Area & Parking Lot z Landscape z Building Exterior z Roadway z High Bay Technical Features z Mounting using M3 screws or Zhaga connector z Size (L x W x H) : (mm) z Optional 200mm connecting wires available. z Suitable Heat Sinks available check options in Heat Sink section z Matching Power Supply available - check options in Power Supply section z SCOBs can be linked together to produce longer chains *This datasheet should be read in conjunction with the relevant OSRAM data on the LED used 1

2 Important Information and Precautions z The SCOB, when powered up, is very powerful and can damage eyes. Thus it is advised that you do not look directly at it. Turn the SCOB away from you and do not shine into the eyes of others. z SCOBs will overheat in operation if not attached to a suitable Heat Sink. Overheating can cause failure or irreparable damage. z Do not operate SCOBs with a Power Supply with unlimited current. Connection to constant voltage Power Supplies that are not current limited may cause the SCOBs to consume current above the specified maximum and cause failure or irreparable damage. z SCOBs when operated, can reach high temperatures thus there is risk of injury if they are touched. z DO NOT TOUCH or PUSH on the LED as this can cause irreparable damage. z DO NOT HOT PLUG ON LED SIDE OF POWER SUPPLY. Product Options ILO-05FF1-13xx-EP211. Family of Products - 18V min 80 CRI ILS PART NUMBER CRI CCT* Forward Voltage Current Flux Typical Wattage Efficacy Lumens/ Watt Radiance Angle Relevant OSRAM LED Data ILO-05FF1-13HW-EP211. min K 18V 750mA 2095Lm 13.5W 155 +/- 60 GWP9LM31. ILO-05FF1-13WM-EP K 2095Lm 155 EM ILO-05FF1-13QW-EP K 2095Lm 155 ILO-05FF1-13NW-EP K 2095Lm 155 ILO-05FF1-13MW-EP K 2250Lm 167 ILO-05FF1-13WW-EP K 2250Lm 167 ILO-05FF1-13ST-EP K 2250Lm 167 ILO-05FF1-13UL-EP K 2250Lm 167 *Due to the special conditions of the manufacturing processes of LEDs, the typical data of technical parameters can only reflect statistical figures and do not necessarily correspond to the actual parameters of each single product which could differ from the typical data. Tolerance +/- 10% Measured with 20mS 350mA pulse at 25 c ILO-05FF2-13xx-EP211. Family of Products - 6V min 80 CRI ILS PART NUMBER CRI CCT* Forward Voltage Current Flux Typical Wattage Efficacy Lumens/ Watt Radiance Angle Relevant OSRAM LED Data ILO-05FF2-13HW-EP211. min K 6V 3000mA 2815Lm 18W 156 +/- 60 GWP9LR32. ILO-05FF2-13WM-EP K 2815Lm 156 EM ILO-05FF2-13QW-EP K 2815Lm 156 ILO-05FF2-13NW-EP K 3050Lm 169 ILO-05FF2-13MW-EP K 3050Lm 169 ILO-05FF2-13WW-EP K 3050Lm 169 ILO-05FF2-13ST-EP K 3050Lm 169 ILO-05FF2-13UL-EP K 3050Lm 169 *Due to the special conditions of the manufacturing processes of LEDs, the typical data of technical parameters can only reflect statistical figures and do not necessarily correspond to the actual parameters of each single product which could differ from the typical data. Tolerance +/- 10% Measured with 20mS 350mA pulse at 25 c 2

3 ILO-05FF3-13xx-EP211. Family of Products - 25V min 80 CRI ILS PART NUMBER CRI CCT* Forward Voltage Current Flux Typical Wattage Efficacy Lumens/ Watt Radiance Angle Relevant OSRAM LED Data ILO-05FF3-13HW-EP211. min K 25V 750mA 2815Lm 18.75W 150 +/- 60 GWP9LR31. ILO-05FF3-13WM-EP K 2815Lm 150 EM ILO-05FF3-13QW-EP K 2815Lm 150 ILO-05FF3-13NW-EP K 3050Lm 163 ILO-05FF3-13MW-EP K 3050Lm 163 ILO-05FF3-13WW-EP K 3050Lm 163 ILO-05FF3-13ST-EP K 3050Lm 163 ILO-05FF3-13UL-EP K 3050Lm 163 *Due to the special conditions of the manufacturing processes of LEDs, the typical data of technical parameters can only reflect statistical figures and do not necessarily correspond to the actual parameters of each single product which could differ from the typical data. Tolerance +/- 10% Measured with 20mS 350mA pulse at 25 c ILO-05FF4-13xx-EP211. Family of Products - 6V min 80 CRI ILS PART NUMBER CRI CCT* Forward Voltage Current Flux Typical Wattage Efficacy Lumens/ Watt Radiance Angle Relevant OSRAM LED Data ILO-05FF4-13HW-EP211. min K 6V 3750mA 3290Lm 22.5W 146 +/- 60 GWP9LT32. ILO-05FF4-13WM-EP K 3290Lm 146 EM ILO-05FF4-13QW-EP K 3290Lm 146 ILO-05FF4-13NW-EP K 3550Lm 158 ILO-05FF4-13MW-EP K 3550Lm 158 ILO-05FF4-13WW-EP K 3550Lm 158 ILO-05FF4-13ST-EP K 3550Lm 158 ILO-05FF4-13UL-EP K 3550Lm 158 *Due to the special conditions of the manufacturing processes of LEDs, the typical data of technical parameters can only reflect statistical figures and do not necessarily correspond to the actual parameters of each single product which could differ from the typical data. Tolerance +/- 10% Measured with 20mS 350mA pulse at 25 c ILO-05FF5-13xx-EP211. Family of Products - 31V min 80 CRI ILS PART NUMBER CRI CCT* Forward Voltage Current Flux Typical Wattage Efficacy Lumens/ Watt Radiance Angle Relevant OSRAM LED Data ILO-05FF5-13HW-EP211. min K 31V 750mA 3290Lm 23.25W 142 +/- 60 GWP9LT31. ILO-05FF5-13WM-EP K 3290Lm 142 EM ILO-05FF5-13QW-EP K 3290Lm 142 ILO-05FF5-13NW-EP K 3550Lm 153 ILO-05FF5-13MW-EP K 3550Lm 153 ILO-05FF5-13WW-EP K 3550Lm 153 ILO-05FF5-13ST-EP K 3550Lm 153 ILO-05FF5-13UL-EP K 3550Lm 153 *Due to the special conditions of the manufacturing processes of LEDs, the typical data of technical parameters can only reflect statistical figures and do not necessarily correspond to the actual parameters of each single product which could differ from the typical data. Tolerance +/- 10% Measured with 20mS 350mA pulse at 25 c 3

4 ILO-05FF3-13xx-CC211. Family of Products - 25V min 90 CRI ILS PART NUMBER CRI CCT* Forward Voltage Current Flux Typical Wattage Efficacy Lumens/ Watt Radiance Angle Relevant OSRAM LED Data ILO-05FF3-13HW-CC211. min K 25V 750mA 2250Lm 18.75W 120 +/- 60 GWP9LR33. ILO-05FF3-13WM-CC K 2250Lm 120 CM ILO-05FF3-13QW-CC K 2250Lm 120 ILO-05FF3-13NW-CC K 2250Lm 120 *Due to the special conditions of the manufacturing processes of LEDs, the typical data of technical parameters can only reflect statistical figures and do not necessarily correspond to the actual parameters of each single product which could differ from the typical data. Tolerance +/- 10% Measured with 20mS 350mA pulse at 25 c ILO-05FF5-13xx-CC211. Family of Products - 31V min 90 CRI ILS PART NUMBER CRI CCT* Forward Voltage Current Flux Typical Wattage Efficacy Lumens/ Watt Radiance Angle Relevant OSRAM LED Data ILO-05FF5-13HW-CC211. min K 31V 750mA 2600Lm 23.25W 112 +/- 60 GWP9LT31. ILO-05FF5-13WM-CC K 2600Lm 112 CM ILO-05FF5-13QW-CC K 2600Lm 112 ILO-05FF5-13NW-CC K 2815Lm 121 *Due to the special conditions of the manufacturing processes of LEDs, the typical data of technical parameters can only reflect statistical figures and do not necessarily correspond to the actual parameters of each single product which could differ from the typical data. Tolerance +/- 10% Measured with 20mS 350mA pulse at 25 c Minimum and Maximum Ratings ILS PART NUMBER Operating Temperature at Tc-Point [ C]* Storage Temperature [ C]* Forward Current per chip [ma]* Reverse Voltage [Vdc]* ILO-05FFx-13xx-xP to mA 1.2V * Exceeding maximum ratings for operating and storage temperature will reduce expected life time or destroy the LED module. Exceeding maximum ratings for operating voltage will cause hazardous overload and will likely destroy the LED module. The temperature of the LED module must be measured at the Tc-Point according to EN in a thermally constant status with a temperature sensor or a temperature sensitive label. Radiation of Single LED 4

5 Technical Drawing 3D Drawing 3D drawing files are available on request from ILS. Please call or Sockets and Connectors The ILS SCOBs are designed to meet the Zhaga standards, and as such will work with any relevant Zhaga compliant connectors or sockets. Below is a selection of products that will work with the ILO-05FFx-13xx-xP211. family of products; Connector: 433 Typ L1 Manufacturer: Bender Wirth Connector: OPTIC CLIP Z50 TYPE1: Manufacturer: TE Connector: Manufacturer: BJB Connector: 8101/G2 Manufacturer: A.A.G. STUCCH Connector: CT AN Manufacturer: IDEAL 5

6 Lens and Reflector Options LEDiL precision-engineered Lenses and Reflectors allow for rapid deployment of all types of light fixtures, including street lights, wall-wash, high-bay, sconces, emergency beacons, parking garage/low-bay, MR and AR down lights, and dock lights. Precision-engineered for maximum efficiency and durability, LEDiL Lenses and Reflectors are released alongside the latest product releases from our LED suppliers. You select the best LED for the application; choose LEDiL and you re selecting the best optical solution as well. Ordering Code Beam Diameter Height Family FWHM Lens Holder Reflector Fastening F13379_ANGELA-S S ANGELA 9 PC socket F13380_ANGELA-M M ANGELA 14 PC F13381_ANGELA-W W ANGELA 30 PC F13662_ANGELA-S-B S ANGELA 9 PC F13662_ANGELA-S-B S ANGELA 10 PC F13663_ANGELA-M-B M ANGELA 16 PC F13663_ANGELA-M-B M ANGELA 16 PC F13664_ANGELA-W-B W ANGELA 33 PC F13664_ANGELA-W-B W ANGELA 34 PC FCN13705_ANGELA-S S ANGELA 10 PC PC FCN13706_ANGELA-M M ANGELA 17 PC PC FCN13707_ANGELA-W W ANGELA 36 PC PC F13840_ANGELA-XW W ANGELA 70 HRPC F13841_ANGELA-XW-B W ANGELA 72 HRPC F13841_ANGELA-XW-B W ANGELA 72 HRPC FC13980_ANGELA-RZ-S-B S ANGELA 10 PC PC screw, socket FC13983_ANGELA-RZ- XW-B FC13987_ANGELA-RZ- M-B FC13988_ANGELA-RZ- W-B W ANGELA 73 PC HRPC socket, screw S ANGELA 18 PC PC socket, screw W ANGELA 37 PC PC socket, screw FCN14690_ANGELA-XW W ANGELA 72 HRPC C14346_ANGELETTE- WAS Asymmetric 97.2 x Angelette Asymmetric PC socket F13325_ANGELINA-S S ANGELINA 19 PC F13325_ANGELINA-S S ANGELINA 22 PC F13401_ANGELINA-M M ANGELINA 30 PC F13401_ANGELINA-M M ANGELINA 35 PC F13402_ANGELINA-W W ANGELINA 43 PC F13402_ANGELINA-W W ANGELINA 48 PC F13659_ANGELINA-S-B S ANGELINA 23 PC F13659_ANGELINA-S-B S ANGELINA 22 PC F13660_ANGELINA-M-B M ANGELINA 37 PC F13660_ANGELINA-M-B M ANGELINA 39 PC F13661_ANGELINA-W-B W ANGELINA 49 PC 6

7 Ordering Code Beam Diameter Height Family FWHM Lens Holder Reflector Fastening F13661_ANGELINA-W-B W ANGELINA 55 PC FCN13694_ANGELINA-S S ANGELINA 21 PC PC screw FCN13695_ANGELINA-M M ANGELINA 37 PC PC screw FCN13696_ ANGELINA-W W ANGELINA 52 PC PC screw F13838_ANGELINA-XW W ANGELINA 89 HRPC F13839_ANGELINA-XW-B W ANGELINA 93 HRPC F13839_ANGELINA-XW-B W ANGELINA 93 HRPC FC13977_ANGELINA- RZ-S-B FC13978_ANGELINA- RZ-M-B FC13979_ANGELINA- RZ-W-B FC13982_ANGELINA-RZ- XW-B S ANGELINA 25 PC PC socket, screw M ANGELINA 43 PC PC socket, screw W ANGELINA 60 PC PC socket, screw W ANGELINA 93 PC HRPC socket, screw C11553_BARBARA-W W Barbara 42 PC glue C13032_BARBARA-WW WW Barbara 70 PC glue FCN13925_BARBARA-S- PF-VERO13/18 FCN13927_BARBARA-W- PF-VERO13/18 FCN13929_BARBARA- WW-PF-VERO13/18 S Barbara 16 PC W Barbara 41 PC WW Barbara 50 PC CN14577_LENA-S-DL S Lena 13 CN14578_LENA-M-DL M Lena 22 PC PC CN14579_LENA-W-DL W Lena 45 PC PC C12154_LENA-M M Lena 20 PC CN12712_LENA-S S Lena 11 PC PC screw CN12713_LENA-M M Lena 20 PC PC screw CN12714_LENA-W W Lena 47 PC PC screw CN12718_LENA-S-DL S Lena 13 PMMA PC PC screw CN12719_LENA-M-DL M Lena 22 PMMA PC PC screw CN12720_LENA-W-DL W Lena 47 PMMA PC PC screw C12948_LENA-WAS Asymmetric Lena Asymmetric PC glue C13117_LENA-SS SS Lena 13 PC socket CN13163_LENA-WAS Asymmetric 111 Lena Asymmetric PC socket CN13173_LENA-WAS-DL Asymmetric 111 Lena Asymmetric PC socket CN13369_LENA-X-WAS Asymmetric Lena Asymmetric PC HRPC socket, screw CN13371_LENA-X-WAS- DL Asymmetric Lena Asymmetric PC PC HRPC socket, screw CN14063_LENA-WAS Asymmetric Lena Asymmetric PC CN14082_LENA-M M Lena 22 PC PC CN14084_LENA-WAS Asymmetric Lena Asymmetric PC PC 7

8 Ordering Code Beam Diameter Height Family FWHM Lens Holder Reflector Fastening CN14085_LENA-X-WAS Asymmetric Lena Asymmetric PC PC CN14086_LENA-SS Asymmetric Lena 14 PC PC CN14087_LENA-SS-DL Asymmetric Lena 17 PC PC CN14088_LENA-WAS-DL Asymmetric Lena Asymmetric PC PC CN14089_LENA-S-DL S Lena 14 PC PC CN14090_LENA-M-DL M Lena 23 PC PC CN14091_LENA-W-DL W Lena 47 PC PC CN14092_LENA-X-WAS- DL C12691_LENA-STD-BASE- CLL030 W Lena Asymmetric PC HRPC Lena N/A PC screw CN12700_LENINA-S S Lenina 15 PC PC screw CN12701_LENINA-M M Lenina 28 PC PC screw CN12702_LENINA-W W Lenina 56 PC PC screw CN12703_LENINA-S-DL S Lenina 17 PC PC screw CN12704_LENINA-M-DL M Lenina 30 PC PC screw CN12705_LENINA-W-DL W Lenina 58 PC PC screw CN12963_LENINA-XW WWW Lenina 74 PC HRPC socket, socket CN12978_LENINA-XW-DL WWW Lenina 72 PC PC HRPC socket CN14101_LENINA-S S Lenina 17 PC PC CN14102_LENINA-M M Lenina 29 PC PC CN14104_LENINA-XW WWW Lenina 75 PC CN14105_LENINA-S-DL S Lenina 17 PC PC PC screw CN14106_LENINA-M-DL M Lenina 31 PC PC CN14107_LENINA-W-DL W Lenina 60 PC PC PC CN14108_LENINA-XW-DL WWW Lenina 74 PC PC PC CN13918_MIRELLA-50-S- PF-VERO13 CN13920_MIRELLA-50-M- PF-VERO13 CN13923_MIRELLA-50- W-PF-VERO13 CN14209_MIRELLA-XW- PF-VERO13 CN14211_MIRELLA-XW- CL-PF-VERO13 CN14212_MIRELLA-XW- DL-PF-VERO13 CN14213_MIRELLA-50-S- DL-PF-VERO13 CN14214_MIRELLA-50-S- CL-PF-VERO13 CN14215_MIRELLA-50-M- DL-PF-VERO13 S Mirella 29 PC M Mirella 38 PC W Mirella 49 PC Mirella 74 PC Mirella 69 PC Mirella 67 PC Mirella 33 PC Mirella 31 PC Mirella 42 PC PC 8

9 Ordering Code Beam Diameter Height Family FWHM Lens Holder Reflector Fastening CN14216_MIRELLA-50-M- CL-PF-VERO13 CN14217_MIRELLA-50-W- DL-PF-VERO13 CN14218_MIRELLA-50-W- CL-PF-VERO Mirella 41 PC Mirella 51 PC PC Mirella 53 PC PC FN14637_OLIVIA-S S Olivia 0 PC PC screw FN14637_OLIVIA-S S Olivia 26 PC PC screw FN14637_OLIVIA-S S Olivia 23 PC PC screw CN13990_SAGA-HB-IP- WHT CN13990_SAGA-HB-IP- WHT HB Saga 64 Silicone HRPC HRPC screw HB Saga 61 Silicone HRPC HRPC screw FN13323_STELLA-A Asymmetric STELLA Asymmetric Silicone PA66GF30 screw FN14253_STELLA-A Asymmetric STELLA Asymmetric Silicone PA66GF30 FN14253_STELLA-A Asymmetric STELLA Asymmetric Silicone PA66GF30 FN14645_STELLA-T4 Street STELLA 0 Silicone PA66GF30 screw FN15187_STELLA-T4 Street STELLA 0 Silicone PA66GF30 CN14236_WINNIE-S S Winnie 28 PMMA PC screw CN14236_WINNIE-S S Winnie 30 PMMA PC screw CN14237_WINNIE-M M Winnie 49 PMMA PC screw CN14238_WINNIE-W W Winnie 48 PMMA PC screw CN14811_WINNIE-O O Winnie PMMA screw FP15073_ZORYA-SC-50 Decorative Zorya 0 Silicone PC socket 9

10 Heat Sink Options ILS has introduced a series of Aluminium Alloy Heat Sinks to be used with our standard range of PowerStars and PowerClusters. These Heat Sinks are supplied with fixing screws for the light engine and for fixing to a base plate. They also come with Thermal Interface Material (TIM) attached to the top surface. More versions will be introduced over the coming months and we are happy to manufacture custom Heat Sinks to your request. ILS Product ILO-01TTx-09xx-xC211. ILO-01FFx-13xx-xC211. ILO-04FFx-13xx-xP211. ILO-05FFx-13x-xP211. ILO-01TTx-13xx-xC211. ILO-03FFx-19xx-xC211. ILO-04FFx-19xx-xC211. ILO-04TTx-23xx-xP211. ILO-09FFx-23xx-xC211. ILO-05FFx-23xx-xC211. ILO-12FFx-23xx-xP211. ILO-16FFx-33xx-xP211 ILO-26FFx-33xx-xP211. ILA-HSINK-RADL-55X20MM-BLK ILA-HSINK-RADL-70X20MM-BLK ILA-HSINK-RADL-70X70MM-BLK ILA-HSINK-RADL-110X65MM-BLK ILA-HSINK-RADL-110X80MM-BLK ILA-HSINK-RADL-120X150MM-BLK N/A Operates under the recommended ILS junction temperature Operates under the recommended LED maximum junction temperature Not suitable for use Heat Sink not designed for use with this product 10

11 Power Supply Options ILS has a comprehensive range of standard power supplies. The table below shows a selection from our offering which are suited to the SCOB application. Constant Current Types ILS Driver Part Number Rating Watts Output IP Rating Output Volts PF Dimming IZC F-0067C-QA 5 150mA IP NO IZC F-0067C-QA 5 350mA IP NO IZC F-0067C-QA 5 700mA IP NO IZC F-5065C-SA 8 350mA IP NO IZC F-5065C-SA 8 700mA IP NO IZCXXX-012T-8000-SA mA mA IPZ YES IZC F-0067A-SA mA IP NO IZC T-9500A-SX mA IP Triac IZC T-9500A-SX mA IP Triac IZC T-9500A-SX mA IP Triac IZC F-9067C-QA mA IP NO IZC F-0067C-SA mA IP NO IZC F-9067C-QA A IP NO 11

12 ILS Driver Part Number Rating Watts Output IP Rating Output Volts PF Dimming IZC A-9266C-SA mA IP v IZC A-0067C-QA A IP v IZC A-9267C-SA mA IP v IZC F-9067C-QA mA IP NO IZC F-9067C-QA A IP NO IZC F-9067C-QA A IP NO IZC A-9267C-SA mA IP v IZC F-9067A-QAL mA IP NO 12

13 Thermal Interface Material Options ILS have produced a range of high-performance, cost effective Thermal Interface Materials to match perfectly their standard products. Our product fills the air pockets between the two surfaces, forming a continuous layer to conduct heat away from the LED to the Heat Sink. ILS offer our TIM in two options Double Sided Adhesive and Single Sided Adhesive. Product Single Sided Adhesive Double Sided Adhesive ILO-01TTx-09xx-xC211. ILA-TIM-LES09-1A ILA-TIM-LES09-2A ILO-01FFx-13xx-xC211. ILA-TIM-LES13-1A ILA-TIM-LES13-2A ILO-04FFx-13xx-xP211. ILA-TIM-LES13-1A ILA-TIM-LES13-2A ILO-05FFx-13x-xP211. ILA-TIM-LES13-1A ILA-TIM-LES13-2A ILO-01TTx-13xx-xC211. ILA-TIM-LES13-1A ILA-TIM-LES13-2A ILO-03FFx-19xx-xC211. ILA-TIM-LES19-1A ILA-TIM-LES19-2A ILO-04FFx-19xx-xC211. ILA-TIM-LES19-1A ILA-TIM-LES19-2A ILO-04TTx-23xx-xP211. ILA-TIM-LES23-1A ILA-TIM-LES23-2A ILO-09FFx-23xx-xC211. ILA-TIM-LES23-1A ILA-TIM-LES23-2A ILO-05FFx-23xx-xC211. ILA-TIM-LES23-1A ILA-TIM-LES23-2A ILO-12FFx-23xx-xP211. ILA-TIM-LES23-1A ILA-TIM-LES23-2A ILO-16FFx-33xx-xP211 ILA-TIM-LES33-1A ILA-TIM-LES33-2A ILO-26FFx-33xx-xP211. ILA-TIM-LES33-1A ILA-TIM-LES33-2A Other sizes are available, including customised parts Assembly Information z The mounting of the SCOB has to be on a metal Heat Sink. z In order to optimise the thermal management, the metal surface needs to be clean (dirt and oil free) and planar for the best contact with the LED module. A thermal grease or heat transfer material is highly recommended. 13

14 Safety Information z The LED module itself and all its components must not be mechanically stressed. z Assembly must not damage or destroy conducting paths on the circuit board. z The mounting of the module is carried out by attaching it at the mounting holes. Metal mounting screws must be insulated with synthetic washers to prevent circuit board damage and possible short circuiting. z To avoid mechanical damage to the connecting cables, the boards should be attached securely to the intended substrate. Heavy vibration should be avoided. z Observe correct polarity! z Depending on the product, incorrect polarity will lead to emission of red or no light. The module can be destroyed! z Pay attention to standard ESD precautions when installing the SCOB. z The SCOB, as manufactured, have no conformal coating and therefore offer no inherent protection against corrosion. z Damage by corrosion will not be accepted as a materials defect claim. It is the users responsibility to provide suitable protection against corrosive agents such as moisture and condensation and other harmful elements. z For outdoor usage, a housing is definitely required to protect the board against environmental influences. The design of the housing must correspond to the IP standards in the application. It is also the responsibility of the user to ensure any housings or modifications keep the Tc junction temperature to within stated ranges. z To also ease the luminaire/installation approval, electronic control gear for LED or LED modules should carry the CE mark and be ENEC certified. In Europe the declarations of conformity must include the following standards: CE: EC , EN 55015, IEC and IEC ENEC: and IEC/EN z The evaluation of eye safety occurs according to the standard IEC 62471:2006 ( photobiological safety of lamps and lamp systems ). Within the risk grouping system of this CIE standard, the LED specified in this data sheet falls into the class moderate risk (exposure time 0.25s). Under real circumstances (for exposure time, eye pupils, observation distance), it is assumed that no endangerment to the eye exists from these devices. As a matter of principle, however, it should be mentioned that intense light sources have a high secondary exposure potential due to their blinding effect. As is also true when viewing other bright light sources (e.g. headlights), temporary reduction in visual acuity and afterimages can occur, leading to irritation, annoyance, visual impairment and even accidents, depending on the situation. For further information please contact ILS The values contained in this data sheet can change due to technical innovations. Any such changes will be made without separate notification. 14