October Providing AV Solutions CAT5 CABLE REQUIRED

Transcription

1 Zone Amplifiers PRO2 ZONE AMPLIFIER WALL PLATE WITH BLUETOOTH - PRO2 Stereo audio amplifier with a stereo Bluetooth receiver built into a wall plate. Use it to power in-ceiling or in-wall speakers with the audio from any Bluetooth enabled device. Or connect via optional 3.5mm input from other sources. 15W(rms) per channel Class-D amplifier Bluetooth wireless audio receiver built-in Bluetooth Version: 3.0 EDR compliant Switch between Bluetooth or 3.5mm (line) inputs Discrete and low-profile Decora-style wall plate design Volume control and status LEDs (Power and BT) Suitable for 4Ω to 8Ω speaker pair (Stereo) Front Power DC and Audio 3.5mm input sockets Or hard wire rear power and/or aux for a neat installation PRO1351WP $75.00 Simple Connection Optional AUX (Phone Not Included) Bluetooth Phone (Phone Not Included) Power input Front or Rear 4-8 Ohm Speakers (Not Included) To speakers Optional AUX Optional Power ZONE AMPLIFIER WALL PLATE WITH MICROPHONE PUT - PRO2 Stereo audio 15W amplifier with a microphone input all built-in to a wall plate. Use it to power in-ceiling or in-wall speakers with the audio output from a line-level sources. Then to make an announcement, flick a switch and speak into a microphone (required). This can be used for shop display installations, office and workshop areas, anywhere basic audio amplification and public address announcements are required. The wall plate amplifier accepts a 3.5mm line and a 6.35mm dynamic microphone input. It has a volume control and power LED. 12Vdc 2A power supply is included and can be front facia connected or rear soldered if required. 115x68x45mm 15W(rms) per channel Class-D stereo output power Switch between 3.5mm (line) or 6.35mm microphone inputs Discrete and compact Decora-style wall-plate design Requires speakers and Dynamic Microphone PRO1328WP $55.00 ZONE AMPLIFIER WITH MICROPHONE PUT - PRO2 The PRO1328 is a stereo audio power amplifier in a small metal box. Use it to power in-ceiling, in-wall or box speakers with the 15W amplifier output. Connect any 3.5mm line audio source device such as computers, media players, TVs, etc. Then to make an announcement, flick a switch and speak into a microphone (required). This can be used for shop display installations, office and workshop areas, anywhere basic audio amplification and public address announcements are required. All in a simple to connect, compact solution. The unit accepts a 3.5mm line and a 6.35mm dynamic microphone input. It has a volume control and power LED. 15W(rms) per channel (@ RL=4 ohm) output power Stereo Class-D type highly efficient power amplifier 40dB microphone pre-amplifier gain. 6.35mm socket Small size and compact: 95mm x 75 mm x 27mm Suitable for wall-mounting 12V 2A power-pack included PRO1328 $59.50 ZONE AMPLIFIER WITH MIC PUT AND WIRED REMOTE VOLUME - PRO2 The PRO1328K is a stereo power amplifier with 3.5mm auxiliary and dynamic microphone inputs to stereo 15W output for your speakers. The amplifier can be conveniently tucked-away with only the volume controller visible. The wired remote volume and power I/O controller is connected to the amplifier unit with common CAT5e network cable. This cable is not included so please also order your CAT5 patch cable depending on length required. [See Data & Computer Section 04] 15 Watts RMS per channel for ample volume Class D power amplifier for efficiency and low heat Wired remote volume control with power off Speaker protection circuit for long service life Speaker screw terminals for wire sizes up to 12 gauge Amp module: 115x95x33mm, Controller: 65x45x40mm 24V 2A Power pack included PRO1328K $89.50 CAT5 CABLE REQUIRED Note: Controller can be connected to the amplifier with an optional CAT5e/6 cable (sold separately) In-wall/In-ceiling speakers Dynamic microphone 12VDC 2.5A Power supply (inc.) PRO1328WP Radio/MP3 player WN849PRO-1

2 AV Extenders PRO2 HDMI EXTENDER OVER CAT5 WALL PLATE KIT WITH IR SUPPORT - PRO2 NOT FOXTEL COMPATIBLE IR A neat and simple wall plate high definition HDMI extender kit. This kit extends your high definition AV source from your media player. Transfer up to a maximum 60 metres via CAT5E/6 cable through the wall cavities. Supports full 1080P high definition, 3D, DTS-HD, Dolby-True-HD, etc. Integrates an infra-red return for full control from the receiving end back to the transmitter. Includes IR sender and receivers on 1.8M leads. Power packs included, connected to the front or rear of the wall-plate. RJ45 sockets on the rear of both units makes for easy connection. Cable sold separately. Each set includes one transmitter and one receiver IR sender and IR receiver included. 1.8M cable each. Discrete and compact Decora-style wall-plate design Connect with single CAT5e or CAT6 cable (Sold separate) Transmission distance up to 60 metres with 1080P resolution (3D) Auto adjustment of feedback, equalization and signal boost Up to 2.25Gbits signal rates in support of 1080P & HD audio HDC6WP $97.50 Pair HDMI EXTENDER THROUGH CAT5e/6 WITH IR REPEATER & HDMI LOOP THROUGH The HDC6IRL HDMI extender consists of a HDMI transmitter and receiver. It also includes a IR Tx and Rx cable and a power supply. It can extend a HDMI connection for up to 50M using a CAT5e and CAT6 cable. And it also has a IR repeater function suitable with a wide range of devices. Instant operation without delay or latency. It has a HDMI loop through on the transmitter side to allow for connection with other output devices. HDC6IRL $97.50 HDMI EXTENDER OVER CAT5 - PRO2 TRANSMITTER & SENDER KIT WITH EDID SUPPORT Each set includes one transmitter and one receiver Easy installation, no need for any configuration or cable tuning For sending 1080p HDMI signal up to 50 Metres using a single CAT5e/6 type UTP cable with zero signal loss Automatic feedback, equalisation and amplification The CAT5e/6 follows standard of IEEE-568B Supports Dolby True-HD, DTS-HD Master audio EDID reading and saving from display Bandwidth can be up to 6.75 Gbps Deep Colour up to 24-bit & 3D compatible 2x DC 5V 1A power supply (included) Requires HDMI and CAT5e/6 cables HDC6ECO $72.50 Pair HDMI Source Game Consolve, PC, STB, Blu-ray, DVD player, etc (Not Included) FOXTEL IQ2 COMPATIBLE HDMI In 1x Cat5e/6 HDMI Out Transmitter Receiver TV (Not Included) Bluetooth Receivers ZONE AMPLIFIER WITH BLUETOOTH - PRO2 PRO1351 is a Bluetooth compatible audio amplifier box. Use it to power in-ceiling, in-wall or box speakers with the audio from any Bluetooth enabled device, or other 3.5mm auxiliary source such as computers, media players, and TVs. Compact solution for permanent audio installations in entertaining areas and bedrooms, etc. Ideal for installing where volume control is not intended to be adjusted by end-users. Ideal for use with mobile devices with Bluetooth audio and volume adjustment is done on the mobile device. Bluetooth EDR 3.0 wireless audio receiver built-in up to 10M Dual input, switch between Bluetooth or 3.5mm (line) inputs 15W(rms) per channel (@ 4 ohm) Class D power amplifier Compact design with preset maximum Volume setting Suitable for 4Ω, 6Ω and 8Ω stereo speakers Includes Speaker Protection circuit Compact 75x48x30mm box 12Vdc 2A power adaptor included PRO1351 $75.00 WN849PRO-2

3 Modular Wall Plate Inserts Pro2 WALL PLATES MODULAR PRO2 MODULAR WALL PLATE & SERTS STEP 1 Grab the MW13FR blank frame STEP 2 Choose up to 3 modules to make the exact wall plate you need DONE! + Mix and match 3 modules and create your own design! Connector Description Frame Only Wall Plate Frame MW13FR $2.35 Brush Insert Wall Plate Brush Module MWI13BR $4.50 RCA x1 RCA Video socket to socket MWI13RCA1 $3.50 RCA x2 RCA Stereo socket to socket MWI13RCA2 $4.95 RCA x3 RCA AV socket to socket MWI13RCA3 $6.90 PAL to F PAL socket to F type socket MWI13PF $3.15 RGBx1 RGB socket to socket MWI13RGB $6.60 F-Type x1 Single F type socket to F type socket MWI13FF $2.00 F-Type x2 Double F type socket to F type socket MWI13FF2 $2.20 TOSLK x1 Toslink socket to socket MWI13TOS $ mm x1 3.5mm audio socket to socket with 0.2M lead MWI13A35 $5.50 Banana Socket x2 Dual banana socket to socket MWI13SPK $9.75 BNC x1 BNC socket to socket MWI13BNC $3.40 USB2.0 x1 USB2.0 socket to socket with 0.2M lead MWI13USB2 $5.50 USB3.0 x1 USB3.0 socket to socket with 0.2M lead MWI13USB3 $6.75 HDMI x1 HDMI socket to socket with 0.2M lead MWI13HDMI $8.75 DVI x1 DVI socket to socket with 0.2M lead MWI13DVI $13.75 VGA x1 DB15 VGA socket to socket MWI13VGA $4.90 CAT5 x1 CAT5e socket to socket joiner MWI13C5J $5.50 CAT6 x1 CAT6 socket to socket joiner MWI13C6J $7.00 CAT6 x1 CAT6 keystone module MWI13C6M $5.75 Blank Insert Blank plate MWI13BL $1.00 Keystone Plate Insert Keystone plate MWI13KS $0.95 USB-BF to USB-AF USB B socket to USB A socket MWI13USBB $ mm socket x1 IR receiver keystone adaptor (Requires MWI13KS) PK4914 $5.50 HDMI x1 HDMI to HDMI joiner (Requires MWI13KS) PK4910 $5.00 MODULAR WALL PLATE FRAME PRO2 The Pro2 modular wall plate allows users to pick and assemble any outlets they need on their wall plate. This wall plate frame allows users to add 3x Pro2 wall plate modules to it. The modular design allows great flexibility to mix and match the modules to suit their needs. And the modules can be snapped to the wall plate frame with ease, simple installation and perfect finish. Size: 116x75x13mm MW13FR $2.35 BRUSH MODULE PRO2 The Pro2 bursh module fits perfectly with the Pro2 wall plate frame. It occupies 3 module positions on the wall plate frame. The brush module allows cable to enter the wall cavity without the cable of an interconnect wall plates. The brush helps to keep the dust away. Brush dimension: 54x30mm MWI13BR $4.50 RCA MODULE PRO2 Pro2 RCA sockets to RCA sockets wall plate insert modules. Available for Video, Stereo and AV Module to suit your application. Connector Dimensions: 32x8mmØ PAL MODULE PRO2 Pro2 PAL socket to F-type socket MWI13PF $3.15 Types RCA Video Module MWI13RCA1 $3.50 RCA Stereo Module MWI13RCA2 $4.95 RCA AV Module MWI13RCA3 $6.90 WN849PRO-3

4 RGB MODULE PRO2 Pro2 Component RCA sockets to Component RCA sockets wall plate insert module. Gold plated connectors Connector Dimensions: 32x8mmØ MWI13RGB $6.60 "F" TYPE FOXTEL APPROVED MODULE PRO2 Pro2 F-type sockets to F-type sockets Foxtel Approved Available in single or double Types Single F-Type Connector MWI13FF $2.00 Double F-Type Connector MWI13FF2 $2.20 TOSLK MODULE PRO2 Pro2 Toslink socket to toslink socket With nickel plated connectors and black insulator Size: 47x24x11mm MWI13TOS $ MM AUDIO MODULE PRO2 Pro2 3.5mm stereo socket to 3.5mm stereo socket wall plate insert module. Lead length: 200mm Size: 47x24x11mm MWI13A35 $5.50 SPEAKER MODULE PRO2 Pro2 2x banana sockets to 2x banana sockets Gold plated connectors with Black/ Red rings MWI13SPK $9.75 BNC MODULE PRO2 Pro2 BNC socket to BNC socket Nickel plated with white colour insulator and washer MWI13BNC $3.40 USB MODULE PRO2 Pro2 USB 2.0 and 3.0 socket to socket with 0.2M lead Types USB 2.0 to USB 2.0 MWI13USB2 $5.50 USB 3.0 to USB 3.0 MWI13USB3 $6.75 HDMI MODULE PRO2 Pro2 HDMI socket to HDMI socket with 0.2M UL30276 type lead Lead diameter: 6mm Gold plated connector MWI13HDMI $8.75 WN849PRO-4

5 DVI MODULE PRO2 Pro2 DVI socket to DVI socket with 0.2M UL20276 type lead Lead diameter: 9.5mm Gold plated connector MWI13DVI $13.75 VGA MODULE PRO2 Pro2 DB15 VGA socket to DB15 VGA socket wall plate insert module. Nickel plated connector with screw terminals on both sides MWI13VGA $4.90 USB B TYPE MODULE PRO2 USB 2.0 B type socket to USB 2.0 A type socket Nickle plated connectors 20cm Ø4.5mm black PVC lead White colour insulator White coulour ABS panel Panel Dimension: 47x24x11mm (Excludes inserts) MWI13USBB $5.00 CAT5e & CAT6 JOER MODULE PRO2 Pro2 CAT5e and CAT6 socket to socket wall plate insert module. To suit Pro2 Modular wall plate. Types CAT5e MWI13C5J $5.50 CAT6 MWI13C6J $7.00 CAT6 KEYSTONE MODULE PRO2 Pro2 CAT6 punch tool insert wall plate insert module. Includes CAT6 keystone and keystone plate BLANK PLATE MODULE PRO2 Pro2 Blank plate for the Pro2 wall plate. White colour MWI13BL $1.00 MWI13C6M $5.75 KEYSTONE PLATE MODULE PRO2 Pro2 Keystone plate for the Pro2 wall plate. White colour MWI13KS $0.95 HDMI KEYSTONE SERT TO SUIT MWI13KS This HDMI keystone insert suits the Pro2 Keystone plate module perfectly. It enables you to hide your expensive premium HDMI cables behind the wall plate and use normal HDMI cables to connect to your devices. Eliminate the hassle of damaging the HDMI lead by frequently plugging and unplugging when you swap devices. PK4910 $5.00 IR RECEIVER KEYSTONE ADAPTOR TO SUIT MWI13KS This 3.5mm keystone module snaps into standard keystone wall plates to allow you to neatly connect IR emitters into your IR control system. The module is easy to connect to UTP cable; simply push the terminal and insert the wire. Suitable for the Pro2 Keystone plate module. PK4914 $5.50 WN849PRO-5