Keysight U1731C/ U1732C/U1733C Handheld LCR Meter. Quick Start Guide
|
|
|
- Nathan Hodge
- 5 years ago
- Views:
Transcription
1 Keysight U1731C/ U1732C/U1733C Handheld LCR Meter Quick Start Guide
2 Contacting Keysight (worldwide contact information for repair and service) Safety and EMC Information This meter is safety-certified in compliance with the following safety and EMC requirements: IEC :2001/ EN :2001 (Second Edition) IEC :2005/ EN :2006 Canada: ICES/NMB-001: Issue 4, June 2006 Australia/New Zealand: AS/NZS CISPR11:2004 Safety Notices CAUTION A CAUTION notice denotes a hazard. It calls attention to an operating procedure, practice, or the like that, if not correctly performed or adhered to, could result in damage to the product or loss of important data. Do not proceed beyond a CAUTION notice until the indicated conditions are fully understood and met. WARNING A WARNING notice denotes a hazard. It calls attention to an operating procedure, practice, or the like that, if not correctly performed or adhered to, could result in personal injury or death. Do not proceed beyond a WARNING notice until the indicated conditions are fully understood and met. Safety symbols Earth (ground) terminal Equipment protected throughout by double insulation or reinforced insulation Caution, risk of electric shock Caution, risk of danger (refer to this manual for specific Warning or Caution information) For further safety information details, refer to the Keysight U1731C/U1732C/U1733C Handheld LCR Meter User s Guide. 2 Keysight U1731C/U1732C/U1733C Quick Start Guide
3 Verify that you received the following items in the shipment of your LCR meter: One pair of alligator clip test leads One 9 V alkaline battery Printed copy of the U1731C/U1732C/U1733C Quick Start Guide Printed copy of the Certificate of Calibration If any item is missing or damaged, keep the shipping materials and contact the nearest Keysight Sales Office. NOTE The descriptions and instructions in this guide apply to the U1731C, U1732C, and U1733C handheld LCR meters. The model U1733C appears in all illustrations. All related documents and software are available for download at Keysight U1731C/U1732C/U1733C Quick Start Guide 3
4 Install the Batteries Your LCR meter is powered by a single 9 V alkaline battery (included with the shipment). 1 Turn the LCR meter OFF and remove the test leads from the terminals. 2 Lift the tilt stand and loosen the screw with a suitable Phillips screwdriver. 3 Remove the battery cover and observe the polarity markings. 4 Insert the battery and replace the battery cover and screw. 4 Keysight U1731C/U1732C/U1733C Quick Start Guide
5 Turn On the LCR Meter ENGLISH To power ON your LCR meter, press the power-on button once. Power-on button WARNING To avoid damage to the device, do not exceed the input limit. Do not apply voltage to the input terminals. Discharge the capacitor before testing. NOTE Your LCR meter is capable of remote data logging. To use this feature, you will need an IR-USB cable (U5481A, purchased separately) and the Keysight GUI Data Logger Software (downloadable from Keysight U1731C/U1732C/U1733C Quick Start Guide 5
6 The LCR Meter at a Glance Display screen Keypad Input terminals/ socket IR communication port Tilt stand Battery cover (Lift the tilt stand for access) External power adapter input jack (+12 VDC) NOTE The external AC to DC power adapter input jack requires an input voltage of +12 VDC. 6 Keysight U1731C/U1732C/U1733C Quick Start Guide
7 Understanding the Keypad ENGLISH Legend Less than 1 second Key response when pressed for: More than 1 second Turns the LCR meter on or off - ESR Hold Rec Save DQO Limit Freq. DCR Starts or stops the auto identification mode Holds or releases the present reading on the display Switches between dissipation factor (D), quality factor (Q), and phase angle (θ) measurement Selects a test frequency Enables or disables the ESR (equivalent series resistance) mode [a] Starts or stops the static recording mode Enables or disables the limit comparison mode Enables or disables the DCR (direct current resistance) mode [b] Range Auto ZLCR P S Tol% Null Cal Disables autoranging and sets a manual range Switches between impedance (Z), inductance (L), capacitance (C), and resistance (R) measurement Enables the tolerance mode Sets the null/relative mode Enables autoranging Toggles between parallel and series circuit mode Turns the backlight display on or off [c] or disables the tolerance mode (if tolerance is enabled) Enters the open/short calibration mode for selected range and test frequency [a] [b] [c] Autoranging only. ESR mode exits to capacitance (C) measurement by default. Applicable for U1733C model only. DCR mode exits to inductance (L) measurement by default. Applicable for U1732C and U1733C models only. Keysight U1731C/U1732C/U1733C Quick Start Guide 7
8 Performing LCR Measurements Auto Identification (Ai) Press the button to automatically identify and select an appropriate primary measurement function (L, C, or R), secondary measurement function (D, Q, or θ), and measurement mode (parallel or series) for the device-under-test. NOTE The LCR meter powers up in the Ai mode by default. is shown on the left of the display screen when the Ai mode is enabled. flashes when the LCR meter is identifying a measurement function and mode. Press again while is shown to exit the Ai mode. LCR measurement steps 8 Keysight U1731C/U1732C/U1733C Quick Start Guide
9 Secondary (D/Q/θ) measurements ENGLISH Inductance (L) measurements 2 Inductor Capacitance (C) measurements 2 Capacitor Resistance (R) measurements 2 Resistor Keysight U1731C/U1732C/U1733C Quick Start Guide 9
10 THIS PAGE HAS BEEN INTENTIONALLY LEFT BLANK. 10 Keysight U1731C/U1732C/U1733C Quick Start Guide
11 This information is subject to change without notice. Always refer to the Keysight website for the latest revision. Keysight Technologies Edition 5, July 1, 2017 Printed in Malaysia *U * U
Keysight U1610/20A Handheld Digital Oscilloscope. Quick Start Guide
Keysight U1610/20A Handheld Digital Oscilloscope Quick Start Guide Contacting Keysight www.keysight.com/find/assist (worldwide contact information for repair and service) Safety and EMC Information This
Keysight GUI Data Logger Software for U1731C, U1732C, and U1733C Handheld LCR Meter
Keysight GUI Data Logger Software for U1731C, U1732C, and U1733C Handheld LCR Meter Quick Start Guide Keysight GUI Data Logger Software Quick Start Guide 3 Notices Copyright Notice Keysight Technologies
Keysight U1701B Dual Display Handheld Capacitance Meter
Keysight U1701B Dual Display Handheld Capacitance Meter User s and Service Guide Notices Copyright Notice Keysight Technologies 2009-2017 No part of this manual may be reproduced in any form or by any
IDEAL INDUSTRIES INC. TECHNICAL MANUAL MODEL:
IDEAL INDUSTRIES INC. TECHNICAL MANUAL MODEL: 61-795 The Service Information provides the following: Precautions and safety information Specifications Performance test procedure Calibration and calibration
40,000-Count Dual-Display Handheld LCR Meters Models 878B, 879B, and 880
Data Sheet 40,000-Count Dual-Display Handheld LCR Meters Full Featured Handheld LCR Meters The 878B, 879B, and 880 40,000-count handheld LCR meters measure inductance, capacitance, and resistance quickly
DUAL DISPLAY L/C/R METER ELC-132A/ELC-133A USER MANUAL
DUAL DISPLAY L/C/R METER ELC-132A/ELC-133A USER MANUAL ATTENTION In this instruction manual, The ELC-133A is represented with Model-A. The ELC-132A is represented with Model-B. Model-A Model-B Items ELC-133A
IDEAL INDUSTRIES, INC. TECHNICAL MANUAL MODELS:
IDEAL INDUSTRIES, INC. TECHNICAL MANUAL MODELS: 61-773 61-775 The Service Information provides the following information: Precautions and safety information Specifications Performance test procedure Calibration
S-14 S-14. Compact Digital Multimeter. Compact Digital Multimeter
S-14 Compact Digital Multimeter S-14 Compact Digital Multimeter SAFETY INFORMATION The following safety information must be observed to insure maximum personal safety during the operation at this meter
User's Guide. MiniTec TM Series Model MN25 MultiMeter
User's Guide MiniTec TM Series Model MN25 MultiMeter Warranty EXTECH INSTRUMENTS CORPORATION warrants this instrument to be free of defects in parts and workmanship for one year from date of shipment (a
Dual Display LCR Meter Model 878A / 879
INSTRUCTION MANUAL MANUAL DE INSTRUCCIÓNES Dual Display LCR Meter Model 878A / 879 Medidor LCR de Doble Exhibicion Visual Modelos 878A/ 879 DUAL DISPLAY L/C/R METER INSTRUCTION MANUAL Model-A = 879 Model-B
OPERATING INSTRUCTION
OPERATING INSTRUCTION AUTORANGING MULTIMETER MAX Ω F C 10A MAX every 15 min. COM V SAFETY INFORMATION The following safety information must be observed to insure maximum personal safety during the operation
Autoranging True RMS Multimeter User Manual
Autoranging True RMS Multimeter User Manual Please read this manual before switching the unit on. Important safety information inside. Contents Page 1. Safety Information... 4 2. Safety Symbols... 5 3.
User's Guide. Phase Sequence and Motor Rotation Tester Model
User's Guide Phase Sequence and Motor Rotation Tester Model 480403 Introduction Congratulations on your purchase of the Extech Model 408403 Motor and Phase Rotation Indicator. This handheld instrument
Model 880 Dual Display LCR METER INSTRUCTION MANUAL
Model 880 Dual Display LCR METER INSTRUCTION MANUAL Safety Summary Before applying power to this instrument: Read and understand the safety and operational information in this manual. Apply all the listed
DM-918 OPERATIONS MANUAL AUTORANGING MULTIMETER
DM-918 OPERATIONS MANUAL AUTORANGING MULTIMETER SAFETY INFORMATION The following safety information must be observed to ensure maximum personal safety during the operation of this meter: This meter is
Owner's Manual. True RMS Multimeter. Model No Safety Operation Maintenance Español
Owner's Manual True RMS Multimeter Model No. 82023 CAUTION: Read, understand and follow Safety Rules and Operating Instructions in this manual before using this product. Safety Operation Maintenance Español
Keysight E5864A Removable Hard Drive for Series Logic Analyzers. Installation Guide
Keysight E5864A Removable Hard Drive for 16850-Series Logic Analyzers Installation Guide Notices Keysight Technologies 2013-2014 No part of this manual may be reproduced in any form or by any means (including
User Manual. 400Amp AC Clamp Meter + NCV. Model MA430. Additional User Manual Translations available at
User Manual 400Amp AC Clamp Meter + NCV Model MA430 Additional User Manual Translations available at www.extech.com Introduction Congratulations on your purchase of this Extech MA430 Clamp Meter. This
Keysight U2722A/U2723A USB Modular Source Measure Units
Keysight U2722A/U2723A USB Modular Source Measure Units Service Guide Notices Copyright Notice Keysight Technologies 2009-2017 No part of this manual may be reproduced in any form or by any means (including
Model A Mini AC/DC Clamp Meter. User's Guide
Model 380950 80A Mini AC/DC Clamp Meter User's Guide Introduction Congratulations on your purchase of the Extech 80A Mini AC/DC Clamp Meter. The Model 380950 measures AC/DC Current, AC/DC Voltage, Resistance,
User Guide True RMS Multimeter Extech EX205T
User Guide Extech EX205T True RMS Digital Multimeter Extech EX210T True RMS Digital Multimeter IR True RMS Multimeter Extech EX205T Introduction Thank you for selecting the Extech EX205T True RMS Auto-ranging
LCR131 Component tester
M LCR131 Component tester User Manual MeterCenter (800) 230-6008 LCR131 Parameters Measured L/C/R/D/Q Measuring Circuit Mode Inductance (L) Defaults to series mode Capacitance/ Resistance (C/R) -Defaults
USER GUIDE Current Calibrator
USER GUIDE Current Calibrator Model PRC10 Introduction Thank you for selecting the Extech Model PRC10. This device is shipped fully tested and calibrated and, with proper use, will provide years of reliable
IDEAL INDUSTRIES, INC. TECHNICAL MANUAL MODEL:
IDEAL INDUSTRIES, INC. TECHNICAL MANUAL MODEL: 61-796 The Service Information provides the following information: Precautions and safety information Specifications Performance test procedure Calibration
AC/DC TRUE RMS CLAMP METER ACM-2036
AC/DC TRUE RMS CLAMP METER ACM-2036 User s Manual Safety International Safety Symbols This symbol, adjacent to another symbol or terminal, indicates the user must refer to the manual for further information.
Manual Supplement. This supplement contains information necessary to ensure the accuracy of the above manual.
Manual Supplement Manual Title: 80 Series V Users Supplement Issue: 8 Part Number: Web-Only Issue Date: 7/18 Print Date: May 2004 Page Count: 7 Revision/Date: 2, 11/08 This supplement contains information
ETHOS Auto Ranging Digital Multimeter
ETHOS 5020 Auto Ranging Digital Multimeter 1 1. SAFETY INFORMATION SAFETY SYMBOLS Warning! Dangerous Voltage (Risk of electric shock). Caution! Refer to the user s manual before using this Meter. Double
7032 Digital-Analog Multimeter
7032 Digital-Analog Multimeter OPERATOR S MANUAL CONTENTS: 1. Safety precautions and procedures 1 1.1. Preliminary 1 1.2. During Use 2 1.3. After Use.. 2 2. General Description. 3 3. Preparation for Use..
Keysight U1602B and U1604B Handheld Digital Oscilloscopes
Keysight U1602B and U1604B Handheld Digital Oscilloscopes Quick Start Guide Safety Information Use the product only as specified by the manufacturer. Do not install substitute parts or perform any unauthorized
AutoRanging Digital MultiMeter
Owner's Manual AutoRanging Digital MultiMeter Model No. 82175 CAUTION: Read, understand and follow Safety Rules and Operating Instructions in this manual before using this product. Safety Operation Maintenance
User's Guide. 800 Amp Clamp Meters. EX710 AC Clamp meter EX720 True RMS AC Clamp meter EX730 AC/DC True RMS Clamp meter
User's Guide 800 Amp Clamp Meters EX710 AC Clamp meter EX720 True RMS AC Clamp meter EX730 AC/DC True RMS Clamp meter Introduction Congratulations on your purchase of the EX710, EX720, or EX730 Clamp DMM.
CM-220 True RMS AC CLAMP METER INSTRUCTION MANUAL
CM-220 True RMS AC CLAMP METER INSTRUCTION MANUAL Safety International Safety Symbols This symbol, adjacent to another symbol or terminal, indicates the user must refer to the manual for further information.
User's Guide. Extech AM A AC Analog Clamp Meter
User's Guide Extech AM300 300A AC Analog Clamp Meter Introduction Congratulations on your purchase of the Extech AM300 Analog Clamp Meter. This device measure AC Voltage and Current, DC Voltage, and Resistance.
Model: Pro93 TRUE RMS LEAKAGE CURRENT TESTER
Model: Pro93 TRUE RMS LEAKAGE CURRENT TESTER CONTENTS TITLE PAGE I. Safety Information.......1 Environmental Conditions... 1 Explanation of Symbols..... 1 II. Specification..... 2 General Specification...
User's Guide. Digital Multimeter plus IR Thermometer. Extech 450 Patented
User's Guide Digital Multimeter plus IR Thermometer 99 Washington Street Melrose, MA 02176 Phone 781-665-1400 Toll Free 1-800-517-8431 Visit us at www.testequipmentdepot.com Extech 450 Patented Introduction
Autoranging Multimeter plus IR Thermometer Extech 450 Patented
User's Guide Autoranging Multimeter plus IR Thermometer Extech 450 Patented Introduction Congratulations on your purchase of the Extech 450 (part number EX450) Autoranging Multimeter plus IR Thermometer.
9040/9040UK. Users Manual. Phase Rotation Indicator
9040/9040UK Phase Rotation Indicator Users Manual PN 2438546 April 2005 2005 Fluke Corporation. All rights reserved. Printed in China All product names are trademarks of their respective companies. LIMITED
Mini Digital Multimeter
User Manual Mini Digital Multimeter Model MN15A Additional User Manual Translations available at www.extech.com Introduction Congratulations on your purchase of the Extech MN15A MultiMeter. The MN15A offers
Model R5010. TRMS Digital Multimeter. Instruction Manual
INSTRUMENTS Model R5010 TRMS Digital Multimeter Instruction Manual Table of Contents Safety...3-4 IEC1010 Overvoltage Installation Category... 3 Warnings... 4 Features... 5 Specifications...5-8 Instrument
General Warranty. For more details, please refer to the user manual, it can be downloaded at
General Warranty OWON warrants that the product will be free from defects in materials and workmanship for a period of 1 year from the date of purchase of the product by the original purchaser from the
User's Guide. True RMS Multimeter plus IR Thermometer. Extech 470 Patent Pending
User's Guide True RMS Multimeter plus IR Thermometer Extech 470 Patent Pending Introduction Congratulations on your purchase of the Extech 470 (part number EX470) True RMS Autoranging Multimeter plus IR
User s Guide. 600A True RMS AC/DC Clamp Meter. Model 38389
User s Guide 600A True RMS AC/DC Clamp Meter Model 38389 Safety International Safety Symbols This symbol, adjacent to another symbol or terminal, indicates the user must refer to the manual for further
Agilent E4418/19A Power Meter Hardware Upgrade Kit
Agilent E4418/19A Power Meter Hardware Upgrade Kit (E9300 Compatible) Installation Guide Agilent Technologies Notices Agilent Technologies, Inc. 2009 No part of this manual may be reproduced in any form
POCKET MULTIMETER Model No: MM18
INSTRUCTIONS FOR: POCKET MULTIMETER Model No: MM18 Thank you for purchasing a Sealey product. Manufactured to a high standard this product will, if used according to these instructions and properly maintained,
W Warning To avoid electrical shock, remove test leads and any input signals from the Model 707 Loop Calibrator before opening the case.
Model 707 Loop Calibrator W Warning To avoid electrical shock, remove test leads and any input signals from the Model 707 Loop Calibrator before opening the case. WCaution The Model 707 Loop Calibrator
OPERATING INSTRUCTION. Pen-Type Digital Multimeter
OPERATING INSTRUCTION Pen-Type Digital Multimeter International Safety Symbols This symbol, adjacent to another symbol or terminal, indicates the user must refer to the manual for further information.
MTP INSTRUCTION MANUAL
DT-118B MTP INSTRUCTION MANUAL Pocket Autoranging Digital Multimeter 3 in 1 Model MTP-1025 Auto Ran ging DMM Hz% A OFF V AU TO PO WER OFF MTP Instruments Table of Contents Introduction Page 1 Features
USER MANUAL. True RMS Multimeter. Extech EX430A
USER MANUAL True RMS Multimeter Extech EX430A Introduction Congratulations on your purchase of the Extech EX430A True RMS Autoranging Multimeter. This meter measures AC/DC Voltage, AC/DC Current, Resistance,
INSTRUCTION MANUAL. Model True RMS AC/DC 30A Mini Clamp-on Meter. Introduction. True RMS AC Current and Voltage
INSTRUCTION MANUAL Model 380942 True RMS AC/DC 30A Mini Clamp-on Meter True RMS AC Current and Voltage Measure low current with high resolution to 0.1mA AC and 1mA DC Auto Power Off One touch DCA zero
General Warranty. For more details, please refer to the user manual, it can be downloaded at
General Warranty OWON warrants that the product will be free from defects in materials and workmanship for a period of 1 year from the date of purchase of the product by the original purchaser from the
Agilent Technologies E5346A 38-Pin Probe and E5351A 38-Pin Adapter Cable
Agilent Technologies E5346A 38-Pin Probe and E5351A 38-Pin Adapter Cable Installation Note The 38-pin probe and adapter cable provide a convenient way to connect two Agilent Technologies logic analyzer
USER'S MANUAL DCL-650
USER'S MANUAL Clamp on Multimeter - Compact Design True RMS AC/DC DCL-650 CIRCUIT-TEST ELECTRONICS www.circuittest.com Safety International Safety Symbols This symbol, adjacent to another symbol or terminal,
Thermo-Anemometer Data Logger Model 1227
Thermo-Anemometer Data Logger Model 1227 Quick Start Guide ENGLISH www.aemc.com Statement of Compliance Chauvin Arnoux, Inc. d.b.a. AEMC Instruments certifies that this instrument has been calibrated using
User's Guide. Digital Multimeter. Model MN42
User's Guide Digital Multimeter Model MN42 Introduction Congratulations on your purchase of the Extech MN42 MultiMeter. The MN42 offers AC/DC Voltage, DC Current, and Resistance testing. Proper use and
Digital Clamp Meter User Manual
Compact AC, AC/DC Digital Clamp Meter User Manual Please read this manual before switching the unit on. Important safety information inside. Contents 1.Safety... 3 2.Safety Notes... 3 3.Warnings... 3 4.Cautions...
Mini Digital Multimeter
User's Guide Mini Digital Multimeter Model MN15 Introduction Congratulations on your purchase of the Extech MN15 MultiMeter. The MN15 offers AC/DC Voltage, AC/DC Current, Resistance, Diode, and Continuity
Line Impedance Stabilization Network (LISN)
Model 3816/2 Line Impedance Stabilization Network (LISN) User Manual ETS-Lindgren Inc. reserves the right to make changes to any product described herein in order to improve function, design, or for any
True RMS Multimeter with IR Thermometer
Owner's Manual True RMS Multimeter with IR Thermometer Model No. 82024 CAUTION: Read, understand and follow Safety Rules and Operating Instructions in this manual before using this product. Safety Operation
Agilent Technologies E5339A 38-Pin Low-Voltage Probe
Agilent Technologies E5339A 38-Pin Low-Voltage Probe Installation Note The 38-pin low-voltage probe provides a convenient way to connect two Agilent Technologies logic analyzer probe cables to a small
General Warranty. For more details, please refer to the user manual, it can be downloaded at
General Warranty OWON warrants that the product will be free from defects in materials and workmanship for a period of 1 year from the date of purchase of the product by the original purchaser from the
User s Guide. 600A AC Clamp Meter. Model 38387
User s Guide 600A AC Clamp Meter Model 38387 Safety International Safety Symbols This symbol, adjacent to another symbol or terminal, indicates the user must refer to the manual for further information.
WARNING CAUTION 1. SAFETY
Instructions for: Professional auto ranging Digital Multimeter - 8 Function MOdel No: TM102 Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according
Keysight U1231A, U1232A, and U1233A Handheld Digital Multimeter
Keysight U1231A, U1232A, and U1233A Handheld Digital Multimeter Service Guide Notices Copyright Notice Keysight Technologies 2011 2017 No part of this manual may be reproduced in any form or by any means
True RMS Multimeter with IR Thermometer
User Guide True RMS Multimeter with IR Thermometer Extech EX210T Introduction Thank you for selecting the Extech EX210T True RMS Autoranging Multimeter. This meter measures AC/DC Voltage, AC/DC Current,
Mini Digital Multimeter
User's Guide Mini Digital Multimeter Model MN15 99 Washington Street Melrose, MA 02176 Phone 781-665-1400 Toll Free 1-800-517-8431 Visit us at www.testequipmentdepot.com Back to the Extech MN15/MN16 Series
87421/22A Power Supply. Operating and Service Manual
87421/22A Power Supply Operating and Service Manual Agilent Part Number: 87421-90001 Printed in USA April 2001 Supersedes: September 1998 Notice The information contained in this document is subject to
* * Agilent Power Distribution Unit (PDU) Installation Guide
Agilent Power Distribution Unit (PDU) Installation Guide For use with Agilent PDU kits and PDU installation kits for Agilent instrument racks June 2008 Edition 7 E0608 *5000-0039* 5000-0039 Notice The
Model INSTRUCTION MANUAL DIGITAL MULTIMETER
Model 57040 INSTRUCTION MANUAL DIGITAL MULTIMETER SAFETY INFORMATION This multimeter has been designed according to IEC 1010 concerning electronic measuring instruments with an overvoltage category (CAT
Installation Guide SMT 2200/3000 VA Input/Output Hardwire Kit
Installation Guide SMT 2200/3000 VA Input/Output Hardwire Kit Important Safety Messages SAVE THESE INSTRUCTIONS - This section contains important instructions that should be followed during installation
Model 2380 Rack-Mount Kit
Keithley Instruments 28775 Aurora Road Cleveland, Ohio 44139 1-800-935-5595 http://www.tek.com/keithley Model 2380 Rack-Mount Kit Installation Instructions Introduction The Model 2380 Fixed Rack-Mount
374 FC/375 FC/376 FC. Clamp Meter. Safety Information
374 FC/375 FC/376 FC Clamp Meter Safety Information 3-Year Limited Warranty. Go to www.fluke.com to register your Product, read the Users Manual, and find more information. A Warning identifies conditions
Instruction Manual RS-1660
Instruction Manual RS-1660 Transformer Turns Ratio Meter This unit passes the following tests: Safety Symbols EN 61010-1: 2010 EN 61010-2-030: 2010 CAT IV 50V Pollution Degree 2 EN 61326-1: 2013 (CISPR
DM3058/DM3058E Digital Multimeter
Quick Guide RIGOL Publication number QGA03109-1110 Feb. 2014 DM3058/DM3058E Digital Multimeter 2008 RIGOL Technologies, Inc. All Rights Reserved Copyright 2008 RIGOL Technologies, Inc. All Rights Reserved.
User's Manual. Autoranging Datalogging Insulation Tester (Megohmmeter) with PC Interface. Model
User's Manual Autoranging Datalogging Insulation Tester (Megohmmeter) with PC Interface Model 380366 Introduction Congratulations on your purchase of the Extech 380366 Datalogging Insulation Tester. The
Model 2380 Rack-Mount Kit
Keithley Instruments 28775 Aurora Road Cleveland, Ohio 44139 1-800-935-5595 http://www.tek.com/keithley Model 2380 Rack-Mount Kit Installation Instructions Introduction The Model 2380 Fixed Rack-Mount
Visit us at
TM PRO3000 Toner and Probe Users Guide 99 Washington Street Melrose, MA 02176 Phone 781-665-1400 Toll Free 1-800-517-8431 Visit us at www.testequipmentdepot.com PN 2440799 (English) October 2005 2005 Fluke
Autoranging Mini Multimeter
User Manual Autoranging Mini Multimeter Model MN16A Additional User Manual Translations available at www.extech.com Introduction Congratulations on your purchase of the Extech MN16A Autoranging Multimeter.
Model R5010. Instruction Manual. TRMS Digital Multimeter. reedinstruments www.
Model R5010 TRMS Digital Multimeter Instruction Manual reedinstruments www com Table of Contents Safety...3-4 Features... 5 Specifications...5-8 Instrument Description...8-9 Operating Instructions...10-16
Model 7705 Control Module
www.keithley.com Model 7705 Control Module User s Guide PA-696 Rev. D / October 2006 A G R E A T E R M E A S U R E O F C O N F I D E N C E Safety Precautions The following safety precautions should be
POCKET MULTIMETER 5115 ENGLISH User Manual
POCKET MULTIMETER 5115 ENGLISH User Manual Copyright Chauvin Arnoux, Inc. d.b.a. AEMC Instruments. All rights reserved. No part of this documentation may be reproduced in any form or by any means (including
Keysight 42941A Impedance Probe Kit
Keysight 42941A Impedance Probe Kit Operation and Service Manual 1 Notices The information contained in this document is subject to change without notice. This document contains proprietary information
USER MANUAL. True RMS Multimeter plus IR Thermometer. Extech EX470A
USER MANUAL True RMS Multimeter plus IR Thermometer Extech EX470A Introduction Congratulations on your purchase of the Extech EX470A True RMS Autoranging Multimeter plus IR Thermometer. This meter measures
Quick Start/Installation Guide
Agilent Technologies E5850A Time Correlation Fixture Quick Start/Installation Guide The Agilent E5850A time correlation fixture allows you to make time-correlated measurements between a 1680/90 or 16700
USER MANUAL. Mini Multimeter with Non-Contact Voltage Detector (NCV) Model EX310
USER MANUAL Mini Multimeter with Non-Contact Voltage Detector (NCV) Model EX310 Introduction Congratulations on your purchase of the Extech EX310 MultiMeter. The EX310 offers AC/DC Voltage, AC/DC Current,
Model 878B, 879B Dual Display LCR METER
Model 878B, 879B Dual Display LCR METER INSTRUCTION MANUAL Safety Summary The following safety precautions apply to both operating and maintenance personnel and must be observed during all phases of operation,
TC100 Precision Thermocouple Calibrator
TC100 Precision Thermocouple Calibrator Table of Contents 1. Introduction.....................1 2. Accessories....................5 3. Set-Up Basic/Advanced...........5 4. Operating Procedure.............6
User's Guide. True RMS Multimeter plus IR Thermometer. Extech 470 Patented
User's Guide True RMS Multimeter plus IR Thermometer Extech 470 Patented Introduction Congratulations on your purchase of the Extech 470 (part number EX470) True RMS Autoranging Multimeter plus IR Thermometer.
Autoranging Multimeter Extech EX503
User's Guide Autoranging Multimeter Extech EX503 Introduction Congratulations on your purchase of the Extech EX503 Autoranging Multimeter. This meter measures AC/DC Voltage, AC/DC Current, Resistance,
Test Asset Optimization Services Power Line Utilization Module (PLUM) DATA SHEET
Test Asset Optimization Services Power Line Utilization Module (PLUM) DATA SHEET Description A Power Line Utilization Module (PLUM) is a device used to monitor the utilization and health parameters of
R5050. Model. Instruction Manual. TRMS AC/DC Clamp Meter. reedinstruments. www. com
Model R5050 TRMS AC/DC Clamp Meter Instruction Manual reedinstruments com Table of Contents Safety... 3 Features... 4 Specifications...4-6 Instrument Description...7-8 Measurement Procedures...9-12 Battery
ATK-2040 AC/DC TRMS Watt Clamp Meter Users Manual
ATK-2040 AC/DC TRMS Watt Clamp Meter Users Manual EN 61010-2-032 CAT II 600V, CAT III 300V Pollution Degree 2 SYMBOLS showed on the clamp meter or in this manual: Caution, risk of danger. Refer to accompanying
Models 2601B, 2602B, and 2604B System SourceMeter Instruments Quick Start Guide
Models 2601B, 2602B, and 2604B System SourceMeter Instruments Quick Start Guide Safety precautions Observe the following safety precautions before using this product and any associated instrumentation.
Industrial Multimeter Extech EX510
User's Guide Industrial Multimeter Extech EX510 Introduction Congratulations on your purchase of the Extech EX510 Autoranging Multimeter. This meter measures AC/DC Voltage, AC/DC Current, Resistance, Frequency
Instruction Manual. 2in1 LAN Tester & Multimeter. Model: 57314
Instruction Manual 2in1 LAN Tester & Multimeter Model: 57314 1 Contents Introduction... Features... Safety Precautions.. Meter Description... Electrical Specification... Operation.. AutoRanging Multimeter.
OX 5022-CK OX 5042-CK
QUICK START USER GUIDE OX 5022-CK OX 5042-CK Statement of Compliance Chauvin Arnoux, Inc. d.b.a. AEMC Instruments certifies that this instrument has been calibrated using standards and instruments traceable
Keysight U2751A USB Modular Switch Matrix
Keysight U2751A USB Modular Switch Matrix User s and Service Guide Notices Copyright Notice Keysight Technologies 2008-2017 No part of this manual may be reproduced in any form or by any means (including
ENGLISH. User manual.
ENGLISH User manual Copyright HT ITALIA 2012 Release EN 2.00-18/12/2012 Table of contents: 1. PRECAUTIONS AND SAFETY MEASURES... 2 1.1. Preliminary instructions... 2 1.2. During use... 3 1.3. After use...
CompactLogix Power Supplies Specifications
Technical Data CompactLogix Power Supplies Specifications 1768 CompactLogix Power Supplies Catalog Numbers 1768-PA3, 1768-PB3 1769 Compact I/O Power Supplies Catalog Numbers 1769-PA2, 1769-PB2, 1769-PA4,
Agilent Protocol Analyzer and Jammer for USB. Quick Start Guide
Agilent Protocol Analyzer and Jammer for USB Quick Start Guide Notices Agilent Technologies, Inc. 2011 No part of this manual may be reproduced in any form or by any means (including electronic storage
Clamp-on Ground Tester Model 6417
Clamp-on Ground Tester Model 6417 Quick Start Guide ENGLISH www.aemc.com CHAUVIN ARNOUX GROUP Shipping Contents: PRODUCT PACKAGING Clamp-on Ground Tester Model 6417 Cat. #2141.02 Hard Accessory Case Cat.