Color Temperature Mounting Distribution Emergency Voltage. 5 Type V CD Concentrated Downlight. EBP 1,2,3 Emergency Battery Pack

Size: px

Start display at page:

Download "Color Temperature Mounting Distribution Emergency Voltage. 5 Type V CD Concentrated Downlight. EBP 1,2,3 Emergency Battery Pack"

Sophia Paul
5 years ago
Views:

experience. An added uplight feature reduces the cave effect for an increased sense of security.

1 Project: Garage & Canopy Location: Cat.No: Type: SoftView Qty: Notes: Ordering guide Philips Gardco SoftView LED parking garage luminaires feature edge lit technology, providing visual comfort with minimal glare to enhance the user experience. An added uplight feature reduces the cave effect for an increased sense of security. SoftView features two distribution options and four lumen packages, providing up to 8,614 lumens for an ideal garage lighting solution. Example: -168L-10-NW-SM-5-UNV-WH Luminaire LED Count System Drive Current Temperature ing Distribution Emergency Voltage Control Options Luminaire Options Finish 168L SoftView Parking Garage 168L 168 LEDs mA mA 10 10mA mA WW 11 Warm 3000K (80 CRI) NW Neutral 4000K (70 CRI) CW Cool 5700K (70 CRI) 1. EBP available with all voltages - step down transformer included with 347V (steps down to 240V single phase) and 480V (steps down to 240V dual phase). 2. Not available for use in Canada 3. Not available with 1800mA SM Surface PM Pendant T Trunnion 5 Type V CD Concentrated Downlight NONE Leave Blank EBP 1,2,3 Emergency Battery Pack 1 1V 8 8V V V UNV Universal 1-277V V 480 3,4 480V V and 480V options supplied with step down transformer. 5. Step down transformer included with 347V (steps down to 240V single phase). 6. Not available with Emergency option (EBP). 7. Available from 1 to 277V only. NONE Leave Blank DD V Dimming LLC2 6,10 Wireless Controls IMRI 7, 10 Integral Motion Response IMRIC 7, 10 Integral Motion Response Factory Customizable F1 8 Single Fuse (1, 277, 347V) F2 8 Double Fuse (8, 240, 480V) F3 5,8 Double Fuse Canadian double pull (8, 240, 347, 480V) WH BZ Bronze MGY Medium Gray OC Optional Specify optional color or RAL ex: OC-LGP or OC-RAL7024. SC Special Must supply color chip. Requires factory quote. 8. Provide specific input voltage. 9. Luminaire includes 0-10V dimming wires for dimming control by others. 10. Includes 0-10V dimming driver (DD). 11. SoftView luminaires are DLC qualified when ordered with CW or NW LED color temperature. WW option does not meet DLC. Accessories (ordered separately) FSIR-100 Handheld programmer (For use with 'IMRI' and'imric' motion response when field programming is required). If desired, only one is needed per job. ES External House Side Shield (field installed) SoftView_LED_ 04/17 page 1 of 5 16 Most Innovative Product of the Year Best in Category

2 LED wattage and lumen values Initial Lumen Output and Efficacy CD Configuration # of LEDs System Drive Current Wattage Temperature 5 (Type 5) Efficacy (Concentrated Downlight) Efficacy -168L-600-NW ma K L-800-NW ma K L-10-NW ma K L-1800-NW ma K System input wattage may vary based on input voltage, by up to +/- 10%, and based on manufacturer forward voltage, by up to +/- 8%. Dimension drawings Surface mount Pendant mount Trunnion mount 3/4" (1.91cm) NPT FOR CONDUIT PIPE 0.53" (1.35cm) 0.41" (1.04cm) 4.0" (10.16cm) 5.25" (12.6 cm) 6.7" (17.02cm) 4.0" (10.16cm) 3/4" (1.91cm) NPT FOR CONDUIT PIPE " ( cm) Approximate Luminaire Weight: 10 lbs (4.5 Kg) 3.42" (8.69cm) Motion response and wireless controls External house side shield Bottom view 0.8" (2.03cm) 2.34" 4.0 SoftView_LED_ 04/17 page 2 of 5

3 Programmable motion response SoftView luminaires with Programmable Motion Response (IMRI or IMRIC) include a passive infrared (PIR) motion sensor (WattStopper FS-211 equipped with an FS-L2W lens) capable of detecting motion within 22 feet of the sensor, 360 around the luminaire, when placed at an 8 foot mounting height. The PIR sensor is factory installed and integral to the luminaire as indicated in drawings on page 2. Available in 1V to 277V input only. Motion sensor off state power is 0.0 watts. Programmable Motion Response (IMRI) luminaires are programmed at the factory as follows: when no motion is detected for 10 minutes, the Motion Response system reduces the wattage by 80%, to % (per RP-) of the normal constant wattage, reducing the light level accordingly. When motion is detected by the PIR, the luminaire returns to full wattage and full light output. Dimming on low is factory set to 80% with duration set at 10 minutes. IMRIC luminaires are programmed at the factory per your custom requirements. Both IMRI and IMRIC include a daylight sensor which enables daylight harvesting. The approximate motion sensor coverage pattern is as shown below. Range Lens 30 The FSIR-100 operates on three standard 1.5V AAA Alkaline batteries or three rechargeable AAA NiMH batteries. The battery status displays in the upper right corner of the display. Three bars next to BAT= indicates a full battery charge. A warning appears on the display when the battery level falls below a minimum acceptable level. To conserve battery power, the FSIR-100 automatically shuts off 10 minutes after the last key press. ss. You navigate from one field to another using (up) or (down) arrow keys. The active field is indicated by flashing (alternates between yellow text on black background and black text on yellow background.) " 59.2mm / 5.92 cm mm.78" / 1.97 cm ft 44' Coverage Side View Once active, use the Select button to move to a menu or function within the active field. Value fields are used to adjust parameter settings. They are shown in less-than/greater-than symbols: <value>. Once active, change them using (left) and (right) arrow keys. In general the up key increments and the down key decrements a value. Selections wrap-around if you continue to press the key beyond maximum or minimum values. Moving away from the value field overwrites the original value. The Home button takes you to the main menu. The Back button can be thought of as an undo function. It takes you back one screen. Changes that were in process prior to pressing the key are lost. FSP-L3: 360 Coverage The FSP-L3 has a high density lens that covers a 4 diameter area FSIR-100 Wireless Remote Programming Tool If you want to change the factory programming, the FSIR-100 Wireless Remote Programming Tool accessory enables on-site field adjustment of sensor settings, including duration and dimming level on low, without the need to connect any wires to the luminaire. The FSIR-100 is a handheld tool that provides wireless access to the FSP-211 sensors for setup, testing and parameter changes. The FSIR-100 display shows menus and prompts to lead you through each process. The navigation pad provides a familiar way to navigate through the customization fields. Within 8-12' mounting height of the sensor, the FSIR-100 allows modification of the system without requiring ladders or tools simply with a touch of a few buttons. The FSIR-100 IR transceiver allows bi-directional communication between the FSP-211 and the FSIR-100 programming tool. Simple menu screens let you see the current status of the system and make changes. It can change FSP-211 sensor parameters such as high/low mode, sensitivity, time delay, cut off and more. With the FSIR-100 you can also establish and store FSP-211 parameter profiles. Power On/Off Back Left Down FSP-1 FSP-211 FD-101 FD-301 BAT= Home/Main Menu Up Right/Next Select More information on the FSIR-100 Remote Programming Tool is available at wattstopper.com. SoftView_LED_ 04/17 page 3 of 5

4 Radio and motion sensor details 0.8" (2.03cm) 2.34" - Motion sensor coverage can be adjusted from a narrow to a wide (25' radius) detection range, which helps reduce false triggers to further increase energy savings Watts max (no load draw) - Operating voltage VAC RMS - Communicates using the ZigBee protocol - Carries out dimming commands from Gateway - Reports ambient light readings to 1500 Ft-Cd - Transmission Systems Operating within the band Mhz - ROHS Compliant - Sensing profiles can be updated to adapt to activity levels in the environment, such as occupancy level, wind, and mounting height. Typical Sensor Coverage SoftView_LED_ 04/17 page 4 of 5

5 Specifications Construction Die-cast aluminum lower housing and upper heatsink. Upper polycarbonate lens provides uplight, tapered shape of upper housing deters dirt accumulation, eases cleaning frequency, and deters birds from sitting or nesting. UV-resistant acrylic lower lens. IP Rating Luminaire optic and electrical housing constructed to IP66. LED Thermal Management The housing design provides thermal radiation fins in the upper housing to provide excellent thermal management critical to long LED system life. Light Engine Edge-lit, light guide technology provides low-glare, uniform illumination. Composed of 168 mid power LEDs. temp: 3000K, 4000K, 5700K +/- 250K. Minimum CRI of 70. Optical System Type 5 symmetrical and concentrated downlight (CD). Light guide plate composed of high performance optical grade PMMA (polymethyl methacrylate) acrylic. Light guide technology allows for optimal light distribution without direct view of the LEDs, providing low-glare, uniform illumination. Up to 4% uplight eliminates cave effect. Electrical UL Class 2 constant current driver. High power factor (0.9 minimum) V. 50/60 Hz Ambient temperature range: -40 C (-40 F) to 40 C (104 F). Open/short circuit protection and voltage mode protection. Optional 0-10V dimming to minimum 10% power. RoHS compliant. Surge protector standard and is in LED Performance: Ambient Temperature C System Current accordance with IEEE / ANSI C guidelines, with a surge current rating of 10KA. For 347V and 480V options, an external IP66-rated step-down transformer is provided for direct mounting to a surface mounted junction box. Junction box supplied by others. Reference installation instructions for additional information. ing Die formed 16 ga. galvanized steel plate is supplied for mounting to a recessed or surface-mounted 4 (10.16 cm) junction box (by others) flush ceiling mount to a recessed junction box, or direct mount to a surface-mounted junction box. Integral hanger tabs on the plate support the luminaire during wiring. Single screw secures luminaire for quick and easy installation. For pendant mounting options, casting has direct 3/4" NPT tapped hole for direct mounting onto rigid 3/4" pendant (by others). Trunnion mounting option is designed to mount to a concrete ceiling with an anodized aluminum trunnion bracket assembly (included and painted to match luminaire finish). The assembly permits (8) one inch incremental mounting height adjustments, ranging from 13 to 21 inches. A 3/4 NPT tapped hole is provided on upper casting for mounting directly to rigid or flexible conduit (by others). Controls Motion Response luminaires (IMRI and IMRIC) include a passive infrared (PIR) motion sensor (WattStopper FSP-211 equipped with an FS-L2W lens) capable of detecting motion within 22 feet of the sensor, 360 around the luminaire, when placed at an 8-12 foot mounting height. Available in 1V to 277V input only. Motion sensor off state power is 1 watt. In Motion Response luminaires, when no motion is detected for 10 minutes, the Motion Response system reduces the wattage by 80%, to % of the normal constant wattage per RP-, reducing the light level accordingly. When motion is detected by the PIR, the PREDICTED LUMEN DEPRECIATION DATA Calculated L 70 Lumen Maintenance Hours 1,2 L 70 Per TM-21 2,3 60,000 hours 25 C 1800 >100,000 >60,000 84% luminaire returns to full wattage and full light output. Includes a daylight sensor which enables daylight harvesting. Wireless Remote Programming tool available (FSIR-100) for field programming (ordered separately). Wireless controls also available, which combine the intelligence of motion and daylight sensing with wireless technology, allowing you to connect with your lighting system via the web. Vibration Resistance SoftView carries a 3G vibration rating that conforms to the standards set forth by ANSI C Testing includes vibration to 3G acceleration in three axes, all performed on the same luminaire. Emergency Optional internal emergency battery pack provides emergency light output for a minimum of 90 minutes when power is lost. Suitable for use in ambient temperatureconditions from 0 C (-32 F) to 38 C (100 F) for 10mA and below - note Emergency EPB not available with 1800mA. EBP configuration is not available for use in Canada. Available with 1-277V, or 'UNV' only. Finish Standard textured finishes include: BZ Bronze Textured, WH Textured, MGY Medium Gray Textured. Listings All luminaires bear UL or cul (where applicable) Wet Location labels. Suitable for use in ambients from -40 (-40 F) to 40 C (104 F). SoftView luminaires are DesignLights Consortium qualified when ordered with CW or NW LED color temperature. WW option does not meet DLC. Limited Warranty 5-year limited warranty. See philips.com/ luminaires for complete details and exclusions. 1. Predicted performance derived from LED manufacturer s data and engineering design estimates, based on IESNA LM-80 methodology. Actual experience may vary due to field application conditions. 2. L 70 is the predicted time when LED performance depreciates to 70% of initial lumen output. 3. Calculated per IESNA TM Published L 70 hours limited to 6 times actual LED test hours. 17 Philips Lighting Holding B.V. All rights reserved. Philips reserves the right to make changes in specifications and/or to discontinue any product at any time without notice or obligation and will not be liable for any consequences resulting from the use of this publication. philips.com/luminaires SoftView_LED_ 04/17 page 5 of 5 Philips Lighting North America Corporation 0 Franklin Square Drive, Somerset, NJ Tel Philips Lighting Canada Ltd. 281 Hillmount Rd, Markham, ON, Canada L6C 2S3 Tel

Garage & Canopy. SoftView. SVPG with comfort optics. 1R Type IR Rectangular 3 4 Type III Asymmetric

Garage & Canopy. SoftView. SVPG with comfort optics. 1R Type IR Rectangular 3 4 Type III Asymmetric Garage & Canopy SoftView SVPG with comfort optics Gardco SoftView LED parking garage luminaires feature edge lit technology, providing visual comfort with minimal glare to enhance the user experience.