2015 List Price Sheet Book. Effective February 1st, 2015

Transcription

1 2015 List Price Sheet Book Effective February 1st,

2 2

3 2015 LIST PRICE INDEX CATEGORY PRICE SHEET PAGE NO. PTE-2 Handheld Calibrator, Modules and Accessories PTE-2/PS-1/ PTE-1 Handheld Calibrator, Modules and Accessories PTE-1/PS-1/ ST-2H Digital Indicator, Modules and Accessories ST2H/PS-1/ PM Digital Pressure Indicator HPM/PS-1/ Series 9 Digital Pressure Indicator S9-1/PS-1/ HPO Transducer HPO/PS-2/ DXD Digital Pressure Transducer HTR-4/PS-1/ Dial Gauges HE/PS-1/ Pressure Volume Controller HVC/PS-1/ Hand Operated Pumps HHP/PS-1/ Heise Priority Recertification Coupon Program COUPON HE/PS-1/ Heise Precision Digital Test Gauge HDTG-1/PS-1/ Rev. 7/1 3

4 4

5 LIST PRICES APPLYING TO BULLETIN PTE-2 Supersedes List Price Sheet PTE-2/PS-1/15 dated February 1, 2015 HANDHELD CALIBRATORS PTE-2/PS-1/15A CALIBRATOR BASE UNIT MODEL PTE-2 Part No. Description Price PTE2 ST PTE2 IS Standard Base (Not I.S.) includes batteries, test leads, AC Adapter, USB cable, Datalogging and Loop Power Supply $ Intrinsically Safe Base (Note: Loop Power Supply is not included in I.S. units) Includes batteries, test leads, AC Adapter, USB cable, Datalogging BASE UNIT ACCESSORIES 611A USB cable X Test Lead set B AC/DC power supply w/ multi region adaptors D Contoured form fit case with shoulder strap PTE2-Case Heavy Duty watertight case D Calibration Interface Module D System Protection Module X USB Protection Device D Module Adapter HQS to PTE STANDARD RECERTIFICATION BASE UNIT Heise PTE-2 Base Unit (No extra charge for as found ) $ HEISE HM2-1, HM2-2 PRESSURE MODULE ±0.1% Accuracy ±0.05, ±0.06, ±0.07% Accuracy ±0.025% Accuracy HEISE TEMPERATURE MODULES HEISE HM2-RT1, HM2-RT2, HM2-TC As Found Certification Adder for all Module Products Rev. 7/1 5

6 LIST PRICES APPLYING TO BULLETIN PTE-2 Supersedes List Price Sheet PTE-2/PS-1/15 dated February 1, 2015 HM2-1 LOW PRESSURE MODULES CAPACITIVE SENSOR Gauge & Differential Pressure (All ranges non-isolated; for clean dry gas only) Inches mm mm cm Accuracy * Water mbar kpa Mercury Water Water ±0.06% ±0.1% 0.25* 0.6* 0.20* 0.5* 6* 0.6* $ $ * Compound Inches mm mm cm Accuracy * Water mbar kpa Mercury Water Water ±0.06% ±0.1% ±0.125* ±0.25* ±0.1* ±0.2* ±3* ±0.3* ±0.25* ±0.6* ±0.25* ±0.5* ±6* ±0.6* $ $ ±0.5* ±1.0* ±1.0* ±15* ±1.5* ±2.5* ±2* ±30* ±3* ±1.0 ±1.5 ±2.5 ±5.0 ±7.5 ±12.5 ±25 ±50 ±75 ±100 ±4 ±6 ±10 ±16 ±25 ±60 ±100 ±160 ±250 ±0.4 ±0.6 ±1.0 ±1.6 ±2.5 ±6 ±10 ±16 ±25 ±3 ±5 ±10 ±15 ±20 ±50 ±100 ±150 ±200 ±50 ±60 ±150 ±200 ±300 ±600 ±1500 ±2000 ±3000 Maximum includes nonlinearity, nonrepeatability and hysteresis. * Accuracy limited to 0.07% of span. ±5 ±6 ±15 ±20 ±30 ±60 ±150 ±200 ±300 HANDHELD CALIBRATORS HM2-1 OPTIONS Non-Standard Ranges PTE-2/PS-1/15A Rev. 7/1 6

7 LIST PRICES APPLYING TO BULLETIN PTE-2 Supersedes List Price Sheet PTE-2/PS-1/15 dated February 1, 2015 HM2-2 HIGH PRESSURE MODULES PIEZORESISTIVE SENSOR Gauge and Absolute (All ranges include 316SS isolation) Inches Inches mm Bar mbar Accuracy psi Water Mercury Mercury kpa kg/cm 2 cmh 2 O mmh 2 O ±0.025% ±0.05% ±0.1% 5 100* * 1 250* 3000* Gauge Pressure * , Absolute Pressure mpa , Gauge Pressure Absolute Pressure ,000** Inches Inches mm Bar mbar Accuracy psi Water Mercury Mercury kpa kg/cm 2 cmh 2 O mmh 2 O ±0.025% ±0.05% ±0.1% Maximum includes nonlinearity, nonrepeatability and hysteresis. *Only available in gauge type not absolute. **10,000 psi range only available as gauge type and 0.1% accuracy. HANDHELD CALIBRATORS PTE-2/PS-1/15A Vacuum Compound ±5 ±100 ±10 ±300 ±25 ±0.25 ±300 ±3000 ±10 ±250 ±20 ±500 ±40 ±0.40 ±600 ±6000 ±15 ±400 ±30 ±750 ±60 ±0.60 ±1000 ±10, /30 30/60 750/1500 ±100 ± / /60 30/ / /200 1/2 1000/ /400 1/4 HM2-2 OPTIONS Enhanced Calibration (no additional temperature error throughout operating range of F) Non-Standard Ranges MS Fitting ( UNJF-3B for 1 8 O.D. tubing) G 1 8 British Standard Fitting Flush Port (isolated sensors only) Welded VCR Connection (with standard finish on gland) Oxygen Cleaning (isolated sensors only) Rev. 7/1 7

8 LIST PRICES APPLYING TO BULLETIN PTE-2 Supersedes List Price Sheet PTE-2/PS-1/15 dated February 1, 2015 HANDHELD CALIBRATORS PTE-2/PS-1/15A RTD PROBE TEMPERATURE MEASUREMENT ACCESSORIES Part No. Description Price HM2-RT1: RTD probe interface module for Pt100, Ni 120, Cu 10 and other RTDs with resistance outputs of 400 ohms or less $ HM2-RT2: RTD interface module for use with Pt1000 RTD probe and other RTDs with resistance outputs of 4000 ohms or less RTD PROBES (compatible with above interface modules) Below listed probes are all 4 wire RTDs with 304 stainless steel sheath and an installed TA4F electrical connector for compatibility with HM2-RT interface modules. They are provided in DIN Class A accuracy. Part No. Description Price 840X Pt100 (385), diameter, 12 inch length, handle and 5 ft. coiled cable $ X Pt100 (385), 0.25 diameter, 12 inch length, handle and 5 ft. coiled cable X Pt100 (385), diameter, 6 inch length, handle and 5 ft. coiled cable X Pt100 (385), 0.25 diameter, 6 inch length, handle and 5 ft. coiled cable X Pt100 (385), diameter, 8 inch length, handle and 5 ft. coiled cable X Pt100 (385), diameter, 12 inch length,10 ft. standard cable X Pt100 (385), 0.25 diameter, 12 inch length,10 ft. standard cable X Pt100 (385), diameter, 6 inch length,10 ft. standard cable X Pt100 (385), 0.25 diameter, 6 inch length,10 ft. standard cable X TA4F mating connector for use with HM2-RT module and your own RTD probes THERMOCOUPLE TEMPERATURE MEASUREMENT ACCESSORIES HM2-TC1 Thermocouple interface module Miniature Thermocouple Connectors to attach thermocouple to interface module: Part No. For Thermocouple Type Price 828X J $ X K X T X E X R X S X B X N Visit our Rev. 7/1 8

9 PRODUCT CODE LOW PRESSURE MODULES MODEL SENSOR TYPE ACCURACY MEDIA COMPATABILITY PRESSURE TYPE PRESSURE UNITS InH2O mmhg kpa mbar cmh2o mmh2o INLET FITTING DIFFERENTIAL PRESSURE RANGES HM2 1 C A D INH2O A HM2- HEISE MODULE 1 - CAPACITIVE SENSOR B -.1% STD. ACCURACY A - NON-ISOLATED SENSOR C - COMPOUND InH2O A - 1/8 NPT INTERNAL C -.06% STD. ACCURACY D - DIFFERENTIAL mmhg C -.07% STD. ACCURACY kpa mbar cmh2o mmh2o COMPOUND PRESSURE RANGES (All prefixed by +/ sign) Product Code Example: Note: C accuracy is 0.06% for ranges 1.0 inh2o and higher. C accuracy is 0.07% for ranges below 1.0 inh2o (shaded values). Note: Pressure range codes which contain a decimal point will be designated with a letter P. For example 0.5 code is P5 H M 2 1 C A D I N H 2 O A Model Sensor Type Accuracy Media Compatability Pressure Type Pressure Units Pressure Range Inlet Fitting 9

10 PRODUCT CODE MEDIUM & HIGH PRESSURE MODULES MODEL SENSOR TYPE ACCURACY MEDIA COMPATABILITY PRESSURE TYPE PRESSURE UNITS psi InH2O InHG kpa mbar cmh2o mmhg BAR Mpa mmh2o INLET FITTING kgcm 2 HM2 2 H I G PSI GAUGE / ABSOLUTE PRESSURE RANGES A HM2- HEISE MODULE 2 - PIEZ0-RESISTIVE SENSOR B -.1% STD. ACCURACY I - ISOLATED SENSOR G - GAUGE psi 5 * *25 *250 * *3000 A - 1/8 NPT INTERNAL C -.05% STD. ACCURACY O - ISOLATED OXYGEN SERVICE A - ABSOLUTE InH2O *300 * D -.025% STD. ACCURACY V - VACUUM InHG F -.1% ENHANCED. ACCURACY G -.05% ENHANCED. ACCURACY H -.025% ENHANCED. ACCURACY C - COMPOUND kpa mbar cmh2o B - 1/8 NPT INTERNAL WITH FLUSH PORT C - G 1/8 BRITISH STD THREAD D - G 1/8 BRITISH STD WITH FLUSH PORT E UNJF-3B INTERNAL THREAD MS mmhg BAR Mpa mmh2o kgcm *10000 VACUUM RANGES COMPOUND PRESSURE RANGES (NOTE: All symmetric ranges prefixed with +/ sign) V15 V400 V30 60 V1000 V1000 V V10000 V30 V60 V100 V2000 V2000 V1500 V1 V60 V100 V200 V4000 V4000 V3000 V2 V400 V4 -NOTE: 10,000 PSI = 0.1% ACCURACY AND GAUGE PRESSURE ONLY Product Code Example: * = Gauge pressure only (no absolute) Note: Pressure range codes which contain a decimal point will be designated with a letter P. For example 0.5 code is P5 H M 2 2 H I G P S I A Model Sensor Type Accuracy Media Compatability Pressure Type Pressure Units Pressure Range Inlet Fitting 10

11 LIST PRICES APPLYING TO BULLETIN PTE-1 Supersedes List Price Sheet PTE-1/PS-1/13 dated March 1, 2013 HANDHELD CALIBRATORS PTE-/PS-1/15 CALIBRATOR BASE UNIT MODEL PTE-1 PTE-1 Base Unit (includes batteries, test leads, standard EMI/RFI protection and Price dual sensor differential measurement function) $ BASE UNIT OPTIONAL FEATURES Datalogging (includes Hi-Lo Alarms) (Hi-Lo Alarms not provided with FM approval option) Enhanced LCD for extended ( 4 to +120 F) operating range FM Approval for intrinsic safety, Class I, Div. 1, Groups A, B, C & D (not available w/ce mark) CE Mark EMI/RFI immunity rating (not available with FM approval) RTD PROBE TEMPERATURE MEASUREMENT ACCESSORIES HQS-RT1: RTD probe interface module for Pt100, Ni 120, Cu 10 and other RTDs with resistance outputs of 400 ohms or less $ HQS-RT2: RTD interface module for use with Pt1000 RTD probe and other RTDs with resistance outputs of 4000 ohms or less FM Approval option for RTD interface module RTD PROBES (compatible with above interface modules) Below listed probes are all 4 wire RTDs with 304 stainless steel sheath and an installed TA4F electrical connector for compatibility with HQS-RT interface modules. They are provided in DIN Class A accuracy. Part No. Description Price 840X Pt100 (385), diameter, 12 inch length, handle and 5 ft. coiled cable $ X Pt100 (385), 0.25 diameter, 12 inch length, handle and 5 ft. coiled cable X Pt100 (385), diameter, 6 inch length, handle and 5 ft. coiled cable X Pt100 (385), 0.25 diameter, 6 inch length, handle and 5 ft. coiled cable X Pt100 (385), diameter, 12 inch length,10 ft. standard cable X Pt100 (385), 0.25 diameter, 12 inch length,10 ft. standard cable X Pt100 (385), diameter, 6 inch length,10 ft. standard cable X Pt100 (385), 0.25 diameter, 6 inch length,10 ft. standard cable X TA4F meeting connector for use with HQS-RT module and your own RTD probes. Ashcroft Inc. provided probes are supplied with the TA4F connector THERMOCOUPLE TEMPERATURE MEASUREMENT ACCESSORIES HQS-TC1 Thermocouple interface module FM Approval option for Thermocouple interface module Miniature Thermocouple Connectors to attach thermocouple to interface module: Part No. For Thermocouple Type Price 828X J $ X K X T X E X R X S X B X N OTHER QUICK SELECT MODULES CQS For base unit calibration, provides quick access to pins inside module bay HQS-XS Dummy module to fill unused module bay in single module applications SEE BACK PAGE FOR ADDITIONAL PRODUCT ACCESSORIES PRICES SUBJECT TO CHANGE WITHOUT NOTICE ALL PRICES SUBJECT TO ESCALATION 11

12 LIST PRICES APPLYING TO BULLETIN PTE-1 Supersedes List Price Sheet PTE-1/PS-1/13 dated March 1, 2013 HQS-1 LOW PRESSURE QUICK SELECT MODULES Gauge & Differential Pressure (All ranges non-isolated; for clean dry gas only) Inches mm mm cm Accuracy * Water mbar kpa Mercury Water Water ±0.06% ±0.1% 0.25* 0.6* 0.20* 0.5* 6* 0.6* $ $ * Compound Inches mm mm cm Accuracy * Water mbar kpa Mercury Water Water ±0.06% ±0.1% ±0.125* ±0.25* ±0.1* ±0.2* ±3* ±0.3* ±0.25* ±0.6* ±0.25* ±0.5* ±6* ±0.6* $ $ ±0.5* ±1.0* ±1.0* ±15* ±1.5* ±2.5* ±2* ±30* ±3* ±1.0 ±1.5 ±2.5 ±5.0 ±7.5 ±12.5 ±25 ±50 ±75 ±100 ±4 ±6 ±10 ±16 ±25 ±60 ±100 ±160 ±250 ±0.4 ±0.6 ±1.0 ±1.6 ±2.5 ±6 ±10 ±16 ±25 ±3 ±5 ±10 ±15 ±20 ±50 ±100 ±150 ±200 ±50 ±60 ±150 ±200 ±300 ±600 ±1500 ±2000 ±3000 Maximum includes nonlinearity, nonrepeatability and hysteresis. * Accuracy limited to 0.07% of span. ±5 ±6 ±15 ±20 ±30 ±60 ±150 ±200 ±300 HANDHELD CALIBRATORS PTE-/PS-1/15 HQS-1 OPTIONS FM Approval for use with FM rated base units CE Mark rating for use with CE rated base units Non-Standard Ranges NEED RECERTIFICATION? The Heise Priority Recertification Coupon Program provides you with the option of purchasing coupons anytime for factory recertification of your Heise Precision Pressure Instrument. Recertification coupons are good for two years from date of purchase. The program provides the following benefits: Major Program Benefits Include: 5 working day turnaround for standard recertification All shipping labels supplied by Ashcroft Inc. Ashcroft Inc. paid return freight via second day air service If purchased with instrument initial purchase order covers instrument and recertification saving paperwork and discount price saves money Coupons may be redeemed for up to two years from date of purchase providing price protection See price sheet COUPON HE/PS-1/13 for pricing details. 12

13 LIST PRICES APPLYING TO BULLETIN PTE-1 Supersedes List Price Sheet PTE-1/PS-1/13 dated March 1, 2013 HANDHELD CALIBRATORS PTE-/PS-1/15 HQS-2 QUICK SELECT PRESSURE MODULES Gauge and Absolute (All ranges include 316SS isolation) Inches Inches mm Bar mbar Accuracy psi Water Mercury Mercury kpa kg/cm 2 cmh 2 O mmh 2 O ±0.025% ±0.05% ±0.1% Gauge Pressure , Absolute Pressure mpa , Gauge Pressure Absolute Pressure *10, Inches Inches mm Bar mbar Accuracy psi Water Mercury Mercury kpa kg/cm 2 cmh 2 O mmh 2 O ±0.025% ±0.05% ±0.1% Vacuum Compound ±5 ±10 ±15 15/30 15/60 ±100 ±250 ±400 ±10 ±20 ±30 30/60 30/100 ±300 ±500 ± / /3000 ±25 ±40 ±60 ± / /400 Maximum includes nonlinearity, nonrepeatability and hysteresis. *10,000 psi range only available as gauge type and 0.1% accuracy. ±0.25 ±0.40 ±0.60 ±1.0 1/2 1/4 ±300 ±600 ± / /4000 ±3000 ±6000 ±10, HQS-2 OPTIONS Enhanced Calibration (no additional temperature error throughout operating range of F) FM Approval for use with FM rated base units CE Mark rating for use with CE rated base units Non-Standard Ranges MS Fitting ( UNJF-3B for 1 8 O.D. tubing) G 1 8 British Standard Fitting Flush Port (isolated sensors only) Welded VCR Connection (with standard finish on gland) Oxygen Cleaning (isolated sensors only)

14 LIST PRICES APPLYING TO BULLETIN PTE-1 Supersedes List Price Sheet PTE-1/PS-1/13 dated March 1, 2013 HANDHELD CALIBRATORS PTE-/PS-1/15 ADDITIONAL ACCESSORIES RS 232 ACCESSORIES Part Number Description Price 838X Cable Assembly, connects base unit to computer with a 9 pin serial port X Cable Assembly, connects base unit to computer with a 9 pin serial port, for CE mark X Adapter, converts connector on cable (838X011-01) to 25 pin type connector on personal computer TEST LEADS 836X Test leads with miniature banana jacks and alligator clips X Test leads with miniature banana jacks and alligator clips, for CE mark POWER SUPPLIES 831X AC adapter to run system off line power (110 Vac, 60 Hz) X AC adapter to run system off line power (100 Vac, 60 Hz) X AC adapter to run system off line power (220 Vac, 50 Hz) X AC adapter to run system off line power (220 Vac, 50 Hz, for CE mark) ELECTRICAL ACCESSORIES LPSIIa Loop Power Supply (powers 4-20mA current loops) SM-1 Voltage Adapter (Converts voltages of 10/250 Vac and 10/400 Vdc to levels acceptable to calibrator electronics. Used to test live switches) CARRYING, TRANSPORT & PROTECTIVE CASES 864X Contoured Form-Fitting Protective Instrument Case with Shoulder Strap X Heavy Duty, Watertight, Instrument Carrying/Transport Case* X Soft Carrying Case* *Holds PTE-1 base unit, 5 sensors and tools OTHER AVAILABLE ACCESSORIES For hand actuated vacuum and pressure pumps and associated accessories, consult price sheet number HHP-1. Visit our 14

15 LIST PRICES APPLYING TO BULLETIN ST2H-1 Supersedes List Price Sheet ST2H/PS-1/13 dated March 1, 2013 DIGITAL PRESSURE INDICATORS ST2H/PS-1/15 ST-2H BASE UNIT Indicator base for use with HQS Modules.Includes dual sensor differential measurement function and A/C adapter. Price ST2H1 Indicator Base with 110 Vac/60Hz A/C Adapter $ ST2H2 Indicator Base with 220 Vac/50Hz A/C Adapter ST2H3 Indicator Base with 100 Vac/60Hz A/C Adapter BASE UNIT OPTIONAL FEATURES B Back Lit LCD D1 Datalogging (inludes Hi-Lo Alarms) N NiCad Batteries (rechargeable) A Alkaline Batteries (non-rechargeable) H Handle L Loop Power Supply P Panel Mounting Brackets To Order: Select part number corresponding to indicator and desired optional features. For example: S T 2 H 1 B D1 L = indicator with 110 Vac/60 Hz adapter, back lit display, datalogging and loop power supply. RTD PROBE TEMPERATURE MEASUREMENT ACCESSORIES Part No. Description Price HQS-RT1 RTD probe interface assembly for Pt100, Ni 120, Cu 10 and other RTDs with resistance outputs of 400 ohms or less [1] $ HQS-RT2 RTD interface assembly for use with Pt1000 RTD probe and other RTDs with resistance outputs of 4000 ohms or less [1] RTD PROBES (compatible with above interface assemblies) Probes listed below are all 4 wire RTDs with 304 stainless steel sheath and an installed TA4F electrical connector for compatibility with HQS-RT interface assemblies. They are provided in DIN Class A accuracy. Part No. Description Price 840X Pt100 (385), diameter, 12 inch length, handle and 5 ft. coiled cable $ X Pt100 (385), 0.25 diameter, 12 inch length, handle and 5 ft. coiled cable X Pt100 (385), diameter, 6 inch length, handle and 5 ft. coiled cable X Pt100 (385), 0.25 diameter, 6 inch length, handle and 5 ft. coiled cable X Pt100 (385), diameter, 12 inch length, 10 ft. standard cable X Pt100 (385), 0.25 diameter, 12 inch length, 10 ft. standard cable X Pt100 (385), diameter, 6 inch length, 10 ft. standard cable X Pt100 (385), 0.25 diameter, 6 inch length, 10 ft. standard cable X TA4F mating connector for use with HQS-RT module and your own RTD probes. Ashcroft Inc. provided probes are supplied with the TA4F connector THERMOCOUPLE TEMPERATURE MEASUREMENT ACCESSORIES HQS-TC1 Thermocouple Interface Module [1] Miniature Thermocouple Connectors to attach thermocouple to interface module: Part No. For Thermocouple Type Price 828X J $ X K X T X E X R X S X B X N SEE BACK PAGE FOR ADDITIONAL PRODUCT ACCESSORIES PRICES SUBJECT TO CHANGE WITHOUT NOTICE ALL PRICES SUBJECT TO ESCALATION 15

16 LIST PRICES APPLYING TO BULLETIN ST2H-1 Supersedes List Price Sheet ST2H/PS-1/13 dated March 1, 2013 HQS-1 LOW PRESSURE QUICK SELECT MODULES Gauge & Differential Pressure (All ranges non-isolated; for clean dry gas only) Inches mm mm cm Accuracy Water mbar kpa Mercury Water Water ±0.06% ±0.1% 0.25* 0.6* 0.20* 0.5* 6* 0.6* $ $ * 1.0* 0.50* 1.0* 15* 1.5* Compound Inches mm mm cm Accuracy Water mbar kpa Mercury Water Water ±0.06% ±0.1% ±0.125* ±0.25* ±0.1* ±0.2* ±3* ±0.3* ±0.25* ±0.6* ±0.25* ±0.5* ±6* ±0.6* $ $ ±0.5* ±1.0* ±1.0* ±15* ±1.5* ±2.5* ±2* ±30* ±3* ±1.0 ±1.5 ±2.5 ±5.0 ±7.5 ±12.5 ±25 ±50 ±75 ±100 ±4 ±6 ±10 ±16 ±25 ±60 ±100 ±160 ±250 ±0.4 ±0.6 ±1.0 ±1.6 ±2.5 ±6 ±10 ±16 ±25 ±3 ±5 ±10 ±15 ±20 ±50 ±100 ±150 ±200 ±50 ±60 ±150 ±200 ±300 ±600 ±1500 ±2000 ±3000 Maximum includes nonlinearity, nonrepeatability and hysteresis. * Accuracy limited to +0.07% of span. ±5 ±6 ±15 ±20 ±30 ±60 ±150 ±200 ±300 DIGITAL PRESSURE INDICATORS ST2H/PS-1/15 HQS-1 OPTIONS Non-Standard Ranges NEED RECERTIFICATION? The Heise Priority Recertification Coupon Program provides you with the option of purchasing coupons anytime for factory recertification of your Heise Precision Pressure Instrument. Recertification coupons are good for two years from date of purchase. The program provides the following benefits: Major Program Benefits Include: 5 working day turnaround for standard recertification All shipping labels supplied by Ashcroft Inc Ashcroft Inc. paid return freight via second day air service If purchased with instrument initial purchase order covers instrument and recertification, saving paperwork and discount price saves money See price sheet COUPON HE/PS-1/15 for pricing details. 16

17 LIST PRICES APPLYING TO BULLETIN ST2H-1 Supersedes List Price Sheet ST2H/PS-1/13 dated March 1, 2013 HQS-2: QUICK SELECT PRESSURE MODULES Gauge and Absolute (All ranges include 316SS isolation) Inches Inches mm Bar mbar Accuracy psi Water Mercury Mercury kpa KgCm 2 cmh2o mmh2o ±0.025% ±0.05% ±0.1% Gauge Pressure , Absolute Pressure mpa , Gauge Pressure Absolute Pressure *10, Inches Inches mm Bar mbar Accuracy psi Water Mercury Mercury kpa kg/cm 2 cmh 2 O mmh 2 O ±0.025% ±0.05% ±0.1% Vacuum Compound ±5 ±10 ±15 15/30 15/60 ±100 ±250 ±400 ±10 ±20 ±30 30/60 30/100 ±300 ±500 ± / /3000 ±25 ±40 ±60 ± / /400 Maximum includes nonlinearity, nonrepeatability and hysteresis. *10,000 psi range only available as gauge type and 0.1% accuracy. ±0.25 ±0.40 ±0.60 ±1.0 1/2 1/4 ±300 ±600 ± / /4000 DIGITAL PRESSURE INDICATORS ST2H/PS-1/15 ±3000 ±6000 ±10, HQS-2 OPTIONS Enhanced Calibration (no additional temperature error throughout operating range of F) Non-Standard Ranges MS Fitting ( UNJF-3B for 1 8 O.D. tubing) G 1 8 British Standard Fitting Flush Port (isolated sensors only) Welded VCR Connection (with standard finish on gland) Oxygen Cleaning (isolated sensors only)

18 List Prices Applying to Digital Pressure Indicator Accessories Supersedes List Price Sheet ST2H/PS-1/13 dated March 1, 2013 DIGITAL PRESSURE INDICATORS ST2H/PS-1/15 ADDITIONAL ACCESSORIES RS 232 ACCESSORIES Part Number Description Price 838X Cable Assembly, connects base unit to computer with a 9 pin serial port X Adapter, converts connector on cable (838X011-01) to 25 pin type connector on personal computer TEST LEADS 836X Test leads with miniature banana jacks, alligator clips and miniature to standard banana jack adapter POWER SUPPLIES 831X AC adapter to run system off line power (110 Vac, 60 Hz) X AC adapter to run system off line power (100 Vac, 60 Hz) X AC adapter to run system off line power (220 Vac, 50 Hz) X volt NiCad battery (5 required) OTHER QUICK SELECT MODULES CQS For base unit calibration, provides quick access to pins inside module bay HQS-XS Dummy module to fill unused module bay in single module applications OTHER AVAILABLE ACCESSORIES For hand actuated vacuum and pressure pumps and accessories, consult price sheet number HHP-1. Visit our 18

19 LIST PRICES APPLYING TO BULLETIN HPM-1 Supersedes List Price Sheet HPM/PS-1/13 dated March 1, 2013 DIGITAL PRESSURE INDICATORS HPM/PS-1/15 PM INDICATOR DIGITAL DISPLAY UNIT Basic indicator for use with Heise PPMX Pressure Sensors listed on following pages and/or Heise PPM-RTX interface and RTD probes listed below. Part No. Description Price PM1 PM Digital Display Unit with 110 Vac/60 Hz A/C Adapter $ PM2 PM Digital Display Unit with 220 Vac/50 Hz A/C Adapter PM3 PM Digital Display Unit with 100 Vac/60 Hz A/C Adapter DIGITAL DISPLAY UNIT OPTIONAL FEATURES L Back Lit LCD Display N NiCad Batteries (rechargeable) A Alkaline Batteries (nonrechargeable) H Handle P Panel Mounting Brackets R Retrofit Panel for Heise Series 7 (Requires panel mounting brackets for installation) E Non Standard Engineering Units To Order: Select part number corresponding to indicator and desired optional features. For example: P M 1 L N H = PM indicator with 110 Vac/60 Hz adapter, back lit display, NiCad batteries and handle. RTD PROBE TEMPERATURE MEASUREMENT ACCESSORIES Part No. Description Price PPM-RT1 RTD probe interface assembly for Pt100, Ni 120, Cu 10 and other RTDs with resistance outputs of 400 ohms or less [1] $ PPM-RT2 RTD interface assembly for use with Pt1000 RTD probe and other RTDs with resistance outputs of 4000 ohms or less [1] RTD PROBES (compatible with above interface assemblies) Probes listed below are all 4 wire RTDs with 304 stainless steel sheath and an installed TA4F electrical connector for compatibility with HQS-RT interface assemblies. They are provided in DIN Class A accuracy. Part No. Description Price 840X Pt100 (385), diameter, 12 inch length, handle and 5 ft. coiled cable $ X Pt100 (385), 0.25 diameter, 12 inch length, handle and 5 ft. coiled cable X Pt100 (385), diameter, 6 inch length, handle and 5 ft. coiled cable X Pt100 (385), 0.25 diameter, 6 inch length, handle and 5 ft. coiled cable X Pt100 (385), diameter, 12 inch length,10 ft. standard cable X Pt100 (385), 0.25 diameter, 12 inch length,10 ft. standard cable X Pt100 (385), diameter, 6 inch length,10 ft. standard cable X Pt100 (385), 0.25 diameter, 6 inch length,10 ft. standard cable X TA4F mating connector for use with PPM-RT module and your own RTD probes. Ashcroft Inc. provided probes are supplied with the TA4F connector SEE BACK PAGE FOR ADDITIONAL PRODUCT ACCESSORIES PRICES SUBJECT TO CHANGE WITHOUT NOTICE ALL PRICES SUBJECT TO ESCALATION 19

20 LIST PRICES APPLYING TO BULLETIN HPM-1 Supersedes List Price Sheet HPM/PS-1/13 dated March 1, 2013 HEISE PPM1: LOW PRESSURE SENSORS Gauge & Differential Pressure (All ranges non-isolated; for clean dry gas only) Inches mm mm cm Accuracy Water mbar kpa Mercury Water Water ±0.06% ±0.1% 0.25* 0.6* 0.20* 0.5* 6* 0.6* $ $ * 1.0* 0.50* 1.0* 15* 1.5* Compound Inches mm mm cm Accuracy Water mbar kpa Mercury Water Water ±0.06% ±0.1% ±0.125* ±0.25* ±0.1* ±0.2* ±3* ±0.3* ±0.25* ±0.6* ±0.25* ±0.5* ±6* ±0.6* $ $ ±0.5* ±1.0* ±1.0* ±15* ±1.5* ±2.5* ±2* ±30* ±3* ±1.0 ±1.5 ±2.5 ±5.0 ±7.5 ±12.5 ±25 ±50 ±75 ±100 ±4 ±6 ±10 ±16 ±25 ±60 ±100 ±160 ±250 ±0.4 ±0.6 ±1.0 ±1.6 ±2.5 ±6 ±10 ±16 ±25 ±3 ±5 ±10 ±15 ±20 ±50 ±100 ±150 ±200 ±50 ±60 ±150 ±200 ±300 ±600 ±1500 ±2000 ±3000 Maximum includes nonlinearity, nonrepeatability and hysteresis. * Accuracy limited to +0.07% of span. ±5 ±6 ±15 ±20 ±30 ±60 ±150 ±200 ±300 DIGITAL PRESSURE INDICATORS PPM1 OPTIONS Non-Standard Ranges HPM/PS-1/15 NEED RECERTIFICATION? The Heise Priority Recertification Coupon Program provides you with the option of purchasing coupons anytime for factory recertification of your Heise Precision Pressure Instrument. Recertification coupons are good for two years from date of purchase. The program provides the following benefits: Major Program Benefits Include: 5 working day turnaround for standard recertification All shipping labels supplied by Ashcroft Inc. Dresser Instruments paid return freight via second day air service If purchased with instrument initial purchase order covers instrument and recertification saving paperwork and discount price saves money Coupons may be redeemed for up to two years from date of purchase providing price protection See price sheet COUPON HE/PS-1/15 for pricing details. 20

21 LIST PRICES APPLYING TO BULLETIN HPM-1 Supersedes List Price Sheet HPM/PS-1/13 dated March 1, 2013 HEISE PPM2: PRESSURE SENSORS Gauge and Absolute (All ranges include 316SS isolation) Inches Inches mm Bar mbar Accuracy psi Water Mercury Mercury kpa KgCm 2 cmh2o mmh2o ±0.025% ±0.05% ±0.1% Gauge Pressure , Absolute Pressure mpa , Gauge Pressure Absolute Pressure *10, Inches Inches mm Bar mbar Accuracy psi Water Mercury Mercury kpa kg/cm 2 cmh 2 O mmh 2 O ±0.025% ±0.05% ±0.1% Maximum includes nonlinearity, nonrepeatability and hysteresis. *10,000 psi range only available as gauge type and 0.1% accuracy. DIGITAL PRESSURE INDICATORS HPM/PS-1/15 Vacuum Compound ±5 ±100 ±10 ±300 ±25 ±0.25 ±300 ±3000 ±10 ±250 ±20 ±500 ±40 ±0.40 ±600 ±6000 ±15 ±400 ±30 ±750 ±60 ±0.60 ±1000 ±10, /30 30/60 750/1500 ±100 ± / /60 30/ / /200 1/2 1000/ /400 1/4 PPM2 OPTIONS Enhanced Calibration (no additional temperature error throughout operating range of F) Non-Standard Ranges MS Fitting ( UNJF-3B for 1 8 O.D. tubing) G 1 8 British Standard Fitting Flush Port (isolated sensors only) Welded VCR Connection (with standard finish on gland) Oxygen Cleaning (isolated sensors only)

22 LIST PRICES APPLYING TO BULLETIN HPM-1 Supersedes List Price Sheet HPM/PS-1/13 dated March 1, 2013 DIGITAL PRESSURE INDICATORS HPM/PS-1/15 ADDITIONAL ACCESSORIES POWER SUPPLIES Part Number Description Price 831X AC adapter to run system off line power (110 Vac, 60 Hz) X AC adapter to run system off line power (100 Vac, 60 Hz) X AC adapter to run system off line power (220 Vac, 50 Hz) X Volt NiCad Battery (5 required) RS 232 ACCESSORIES 838X Cable Assembly, connects base unit to computer with a 9 pin serial port X Adapter, converts connector on cable (838X011-01) to 25 pin type connector on personal computer OTHER AVAILABLE ACCESSORIES For hand actuated vacuum and pressure pumps and accessories, consult price sheet HHP-1. Visit our 22

23 LIST PRICES APPLYING TO BULLETIN S9-1 SERIES 9 DIGITAL PRESSURE INDICATORS Supersedes List Price Sheet S9-1/PS-1/13 dated March 1, 2013 MODEL 901A.07 PERCENT OF SPAN ACCURACY MODEL 901B.035 PERCENT OF SPAN ACCURACY (Prices on reverse side) MODEL 901A Table 1 Gauge and Absolute (1) Standard Ranges (2) (1) Minimum absolute range: 5 psia or equivalent. (2) Non-standard ranges on application. PRICES SUBJECT TO CHANGE WITHOUT NOTICE ALL PRICES SUBJECT TO ESCALATION S9-1/PS-1/15 Millimeters kg/cm 2 Millibar or Bench Mount Inches Inches Mercury kp/cm 2 Centimeters Millimeters Model 901A psi Water Mercury or Torr Pascals or Bar Water Water Gauge Absolute kpa See note (1) below , $ $ , , $ mpa $ $ ,000 15, , $ $ , ,000 V R kpa A A C N $ U G U E M S 760 Table 2 Compound Ranges psi Inches Hg 901A Pressure Vacuum Pressure Vacuum (0.07%) $ *For convenient display conversion between psi and Hg, add the Unit Select *feature to the part number specification. 23

24 LIST PRICES APPLYING TO BULLETIN S9-1 SERIES 9 DIGITAL PRESSURE INDICATORS Supersedes List Price Sheet S9-1/PS-1/13 dated March 1, 2013 MODEL 901B.035 PERCENT OF SPAN ACCURACY MODEL 901B Table 1 Gauge and Absolute (1) Standard Ranges (2) Millimeters kg/cm 2 Millibar or Bench Mount Inches Inches Mercury kp/cm 2 Centimeters Millimeters Model 901B psi Water Mercury or Torr Pascals or Bar Water Water Gauge Absolute kpa 2 50 (3) See note (1) below , $ $ , , $ mpa $ $ ,000 15, , $ $ , ,000 V R kpa A A C N $ U G U E ,000 M S 760 (1) Minimum absolute range: 5 psia or equivalent. (2) Non-standard ranges on application. (3) Certification of 50 in. H 2 O limited to ±.06% fs due to resolution limitation. Table 2 Compound Ranges psi Inches HG 901B Pressure Vacuum Pressure Vacuum (0.035%) $ *For convenient display conversion between psi and Hg, add the Unit Select *feature to the part number specification. S9-1/PS-1/15 24

25 LIST PRICES APPLYING TO BULLETIN S9-1 SERIES 9 DIGITAL PRESSURE INDICATORS Supersedes List Price Sheet S9-1/PS-1/13 dated March 1, 2013 SERIES 9 BAROMETER Table 4E Inches 901A 901B Hg Absolute (0.07%) (0.035%) S9-1/PS-1/ $ $ OPTIONAL FEATURES Description Price Analog Output: Specify in purchase order 4-20mA,0-5 Vdc or 0-10 Vdc $ BCD Output (1) RS232 Output (1) Hi/Lo Setpoint Handle with Potentiometer Adjusting Tool Min/Max Recall Oxygen Clean *RTS (Remote Sensor): Specify cable length in purchase order description 5 Feet Feet Feet F to 120 F Temperature Compensation (standard is 45 F to 95 F) Tare Unit Select: Specify three engineering units under special instructions Panel Mounting Brackets Series 7 Retrofit Panel (requires panel mounting brackets for installation) Display Hold UNF-2B female connection (for 1 4 O.D. high pressure tubing) (standard above 5,000 psi) Non-Standard Pressure Range* (1) BCD and RS232 cannot be supplied on the same unit. Please specify one or the other. *Consult factory for availability. Calibrated Spare or Replacement Pressure Sensor* with Calibration Proms 901A 901B Range (psi) Gauge Absolute Gauge Absolute To 1,000 psi $ $ $ $ Over 1,000 to 10,000 psi Over 10,000 to 30,000 psi *RTS (Remote Sensor) add $

26 LIST PRICES APPLYING TO BULLETIN S9-1 SERIES 9 DIGITAL PRESSURE INDICATORS Supersedes List Price Sheet S9-1/PS-1/13 dated March 1, 2013 RESOLUTION TABLE Range 901A 901B Range 901A 901B * *Inches H 2 O range limited to four digit display for both 901A and 901B. S9-1/PS-1/15 TERMS: MINIMUM ORDER CHARGE: $50.00 PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE ORDERS SUBJECT TO FINAL ACCEPTANCE AT OUR WORK SALES OFFICE List prices are furnished as trade information only and not as a restriction on resale pricing ALL PRICES ARE SUBJECT TO ESCALATION Prices are F.O.B. Stratford, Conn. 1% 10 Days, Net 30 No Freight Allowed Visit our 26

27 LIST PRICES APPLYING TO BULLETIN HTR-2 HPO SERIES PRECISION ANALOG PRESSURE TRANSDUCERS Supersedes List Price Sheet HPO/PS-2/13 dated March 1, 2013 HPO/PS-2/15 Table 1 Ordering Information To order, please specify the following 1) Model Designation: HPO 2) Pressure Range: From Table 3) Pressure Type: Gauge, Absolute, Compound or Vacuum 4) Output: (1) Vdc, 10 Vdc, ±5 Vdc, or 4-20mA (2 wire) 5) Process Connection:..... Standard: 1 4 NPTM (above 5000 psi UNF 2B for 1 4 high pressure tubing) 6) Electrical Connection: (2)... Standard: 1 meter pigtail 7) Options: Consult Table 5 Table 2 Standard (3) Gauge and Absolute Pressure Ranges Base Price Millimeters kg/cm 2 Millibar or Inches Inches Mercury kp/cm 2 Centimeters Millimeters Pressure Type psi Water Mercury or Torr Pascals or bar Water Water Gauge Absolute kpa , , $ $ , , , , mpa , Table 3 Standard Vacuum Ranges (1) Voltage Output: 3-wire non-isolated standard; 4-wire isolated output optional; 4-20mA output optional. (2) Vented, 1 meter pigtail is standard connection. Optional Bendix PTO connector available. (Includes mating connector.) (3) Non-standard ranges on application, consult factory. See reverse side for Compound Ranges and Optional Features N/A PRICES SUBJECT TO CHANGE WITHOUT NOTICE ALL PRICES SUBJECT TO ESCALATION 27

28 LIST PRICES APPLYING TO BULLETIN HTR-2 Supersedes List Price Sheet HPO/PS-2/13 dated March 1, 2013 HPO SERIES PRECISION ANALOG PRESSURE TRANSDUCERS HPO/PS-2/15 PSI Table 4 Compound Pressure Ranges Inches Hg Pressure Vacuum Pressure Vacuum Output Signal Specify bi-polar voltage or unipolar voltage or current Unipolar voltage or current only $ Table 5 Optional Features Optional Features All Models Add to Base Price Bendix PTO Connector (includes mating connector) $ Wire Isolated Voltage Output ma Output Pipe/Wall Mounting Bracket Clean for Oxygen Service Atmospheric Reference Port Non-standard Process Connection* Typical Typical MS33656E4 Flared Tube Fitting w/gasket VCR Fitting w/standard Finish on Gland VCR Fitting w/10ra/20ra Finish on Gland (P) VCR Fitting w/3ra/5ra Finish on Gland (PX) Non-Standard Range* *Consult factory for price and availability of non-standard process connections. TERMS: MINIMUM ORDER CHARGE: $50.00 PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE ORDERS SUBJECT TO FINAL ACCEPTANCE AT OUR WORK SALES OFFICE List prices are furnished as trade information only and not as a restriction on resale pricing ALL PRICES ARE SUBJECT TO ESCALATION Prices are F.O.B. Stratford, Conn. 1% 10, Net 30 Days No Freight Allowed Visit our 28

29 List Price Sheet DXD SERIES DIGITAL PRESSURE TRANSDUCER Supersedes List Price Sheet HTR-4/PS-1/13 dated March 1, 2013 ORDERING INFORMATION Please include the following information with your order. (1) (2) (3) (4) (5) (6) (7) (8) Sensor Pressure Electrical DXSA Type Type Range Inlet Connection Output Option HTR-4/PS-1/15 Example: DXSA P G 100 N SV 2 N (1) DXSA DXD Transducer designation (2) Sensor Insert P to designate piezo resistive sensor (3) Pressure Type Select one of the following pressure types: G = Gauge A = Absolute V = Vacuum C = Compound (4) Range Select from the following full scale pressure ranges: (5) Inlet PSI Ranges Gauge Pressure Absolute Pressure 5 $ N/A $ $ $ $ $ $ ,000* $ N/A Vacuum Compound 10 10/10 15 $ /15 $ /30 15/60 Code Description Price N 1 4 NPT male Standard on ranges up to and incl psi N/C UNF-2B female port for 1 4 O.D. high pressure tubing: A Standard on ranges over 5000 psi N/C Optional on ranges 5000 psi and below M Optional MS ( male w/37 flare for 1 4 tubing) For all ranges Optional VCR (for ranges up to and including 5000 psi only): S With standard finish on gland P With RA finish on gland X With 3-5 RA finish on gland SEE NEXT PAGE FOR ADDITIONAL FEATURES AND ACCESSORIES *Accuracy limited to 0.1% of span. 29

30 List Price Sheet Supersedes List Price Sheet HTR-4/PS-1/13 dated March 1, 2013 DXD SERIES DIGITAL PRESSURE TRANSDUCER HTR-4/PS-1/15 (6) Electrical Connection (7) Output Code Description Price SV Standard Switchcraft Receptacle and Connector for Vented Housing N/C SS Optional Switchcraft Receptacle and Connector for Sealed Housing N/C BV Optional Bendix Style Receptacle and Connector for Vented Housing $99.14 BS Optional Bendix Style Receptacle and Connector for Sealed Housing Note: In the RS-232 configuration, each DXD transducer is provided with a mating connector with 25 ft. cable and RJ11 plug termination. In the RS-485 configuration, each DXD transducer includes a mating connector only. Code Description Price 2 RS-232 Compatible (see required accessories below) N/C 4 RS-485 Compatible* (see available accessories, page 3) N/C *Requires PC equipped with RS-485 interface card or adapter (8) Options Code Description Price N No options N/C O Clean for Oxygen Service $ (9) Accessories RS-232 configurations require: (1) serial port converter (supports up to 99 DXDs (RS-232) on one serial port) ac adapter (powers up to 32 DXDs) 5 port expander module; to connect up to 4 DXD (RS-232) cables and 1 ac adapter to serial port converter. (Multiple 5 port expander modules can be interconnected for systems requiring 5 DXDs (RS-232) or more) Setup/utility software (to allow DXD to communicate with PC) Mating connector and cable (one provided with each DXD (RS-232) ) Complete kit includes all required accessories identified above to operate up to 4 DXD (RS-232) transducers Item Part No. Description Price 1 856X Complete Kit for RS-232 configurations only, 110 Vac operation (includes items 3 & 5-8 below) $ X Complete Kit for RS-232 configurations only, 220 Vac operation (includes items 4-8 below) *3 831X Vac adapter with RJ11 plug (powers up to 32 DXD units maximum) X Vac adapter with RJ11 plug (powers up to 32 DXD units maximum) *5 838X port (RJ11) expander module (provides system expansion capability) *6 838X Serial port converter (RS-232 to network) one required per 99 transducers *7 838X DB25 male to DB9 female plug adapter C CD setup/utility software Additional Accessories *9 828X ft. cable with Switchcraft and RJ11 plug X ft. cable w/itt Canon/Bendix PTO6 and RJ11 plug X Switchcraft connector only X ITT Canon/Bendix PTO6 connector only *Pictured on page

31 List Price Sheet Supersedes List Price Sheet HTR-4/PS-1/13 dated March 1, 2013 DXD SERIES DIGITAL PRESSURE TRANSDUCER HTR-4/PS-1/15 (10) Accessories RS-485 configurations require: Mating connector/adapter assembly terminating in dual RJ45 (modular Y ) jacks 25 ft. cable assembly with RJ45 plug ends ac adapter with RJ45 plug (powers up to 32 DXD units maximum) Adapter; RJ45 jack to DB9 female D connector Setup/utility software (to allow DXD to communicate with PC) Customer supplied RS-485 interface card or adapter installed on PC Complete kit includes all required accessories above to operate up to 1 DXD (RS-485) transducer. For systems with multiple DXDs, add one additional mating connector/adapter assembly and one 25 ft. cable assembly per DXD (RS-485). or, for systems with customer provided power, wiring and PC interface card or adapter: Mating connector only (provided with each DXD (RS-485) transducer) Setup/utility software (to allow DXD to communicate with PC) Item Part No. Description Price 1 856X Complete Kit for 110 Vac operation, for Switchcraft equipped DXDs (includes items 5, 7, 8, 9, 11 and 12 below) $ X Complete Kit for 220 Vac operation, for Switchcraft equipped DXDs (includes items 5, 7, 8, 10, 11 and 12 below) X Complete Kit for 110 Vac operation, for ITT Canon/Bendix equipped DXDs (includes items 6, 7, 8, 9, 11 and 12 below) X Complete Kit for 220 Vac operation, for ITT Canon/Bendix equipped DXDs (includes items 6, 7, 8, 10, 11 and 12 below) *5 838X Switchcraft mating connector/adapter assembly terminating in dual RJ45 (modular Y ) jacks X ITT Canon/Bendix mating connector/adapter assembly terminating in dual RJ45 (modular Y ) jacks *7 838X ft. cable assembly with RJ45 plug ends *8 838X Adapter; RJ45 jack to DB9 pin D connector *9 831X Vac adapter with RJ45 plug (powers up to 32 DXD units maximum) X Vac adapter with RJ45 plug (powers up to 32 DXD units maximum) X DB9 male to DB25 female plug adapter C CD setup/utility software Additional Accessories X Switchcraft mating connector only X ITT Canon/Bendix PTO6 mating connector only *Pictured on page 28. TERMS: MINIMUM ORDER CHARGE $50.00 NET PRICES SUBJECT TO CHANGE WITHOUT NOTICE ORDERS SUBJECT TO FINAL ACCEPTANCE AT OUR WORK SALES OFFICE These prices are furnished as trade information only and not as a restriction on resale pricing. ALL PRICES ARE SUBJECT TO ESCALATION Prices are F.O.B. Stratford, CT 1% 10, Net 30 Days Visit our web 31

32 List Price Sheet Supersedes List Price Sheet HTR-4/PS-1/13 dated March 1, 2013 DXD SERIES DIGITAL PRESSURE TRANSDUCER HTR-4/PS-1/15 ACCESSORIES FOR RS X Vac Adapter w/rj-11 plug end 838X Port Expander 838X Serial Port Converter 838X DB25 male to DB9 female adapter 828X cable w/switchcraft and RJ-11 plug ACCESSORIES FOR RS X Switchcraft modular Y connector w/rj-45 plugs 838X cable w/rj-45 plug ends 838X RJ-45 to DB9 pin adapter 831X Vac adapter w/rj-45 plug end 32

33 REPLACEMENT PARTS List Price Sheet Supersedes List Price Sheet HE/PS-1/15 dated February 1, 2015 PRESSURE GAUGES GAUGES HE/PS-1/15A MODEL CC CM CMM DIAL SIZE INCHES SCALE LENGTH INCHES POINTER TRAVEL DEGREES PSI Ranges Standard Gauge and Bourdon Tube Absolute (1) Material 0-12/ BERYLLIUM $ $ $ $ $ $ $ COPPER 0-30 $ $ $ CONSULT 0-40 FACTORY CONSULT FACTORY STAINLESS STEEL CONSULT FACTORY CONSULT FACTORY 0-10, , , , , , * * * * 0-50, , , ,000 (1) See Optional Features block on page 32 for Absolute Range price adder. * Pointer travel 300 Pointer travel 270 Other non-standard ranges on application. For Optional Features see page 32. STANDARD INLET FITTINGS: Back connected 1 4 NPT Female for all ranges up to and including 10,000 psig. Back connected UNF-2B Female for 1 4 O.D. high pressure tubing for ranges over 10,000 psi. PRICES SUBJECT TO CHANGE WITHOUT NOTICE ALL PRICES SUBJECT TO ESCALATION IMPORTANT ORDERING INFORMATION (Refer also to Bulletin HE- 1 ) Please specify: 1. Model (CC, CM or CMM) 2. Dial Size (6, 8 1 2, 12 or 16 ) 3. Pressure Range and Engineering unit (eg. 0/100 psi, 0/30 in. Hg Vacuum, etc.) 4. Pressure Type (Gauge, Absolute, Vacuum, Compound) 5. Inlet Connector Size, Gender and Type (eg. 1 4 Female NPT see options pg. 4) 6. Inlet Connector Location (Back or Bottom) 7. Mounting Type (Panel or Wall) 8. Optional Features (if applicable see options pg. 36) 9. Pressure Medium (Air, Oil, etc.) Rev. 7/1 33

34 REPLACEMENT PARTS List Price Sheet Supersedes List Price Sheet HE/PS-1/15 dated February 1, 2015 BASE PRICES PRESSURE GAUGES MODEL CC CM CMM GAUGES HE/PS-1/15A DIAL SIZE INCHES SCALE LENGTH INCHES POINTER TRAVEL DEGREES Millimeters Mercury Standard Gauge and Bourdon Tube Absolute (1) Material BERYLLIUM $ $ $ $ $ $ $ COPPER $ $ $ CONSULT FACTORY STAINLESS CONSULT FACTORY STEEL Gauge and Absolute (1) Bar kg/cm 2 kpa MPa kp/cm BERYLLIUM COPPER CONSULT FACTORY CONSULT FACTORY STAINLESS STEEL CONSULT FACTORY CONSULT FACTORY * * * * (1) See Optional Features block on page 36 for Absolute Range price adder. Other non-standard ranges on application. For Optional Features see page 36. For ordering information see page 36. * Pointer travel 300 Pointer travel 270 STANDARD INLET FITTINGS: Back connected 1 4 NPT Female for all ranges up to and including 600 Bar. Back connected UNF-2B Female for 1 4 O.D. high pressure tubing for ranges over 600 Bar. Rev. 7/1 34

35 REPLACEMENT PARTS List Price Sheet Supersedes List Price Sheet HE/PS-1/15 dated February 1, 2015 Rev. 7/1 BASE PRICES 35 PRESSURE GAUGES GAUGES HE/PS-1/15A MODEL CC CM CMM DIAL SIZE INCHES SCALE LENGTH INCHES POINTER TRAVEL DEGREES Inches Mercury Standard Gauge and Bourdon Tube Absolute (1) Material BERYLLIUM $ $ $ $ $ $ $ COPPER 0-60 $ $ $ CONSULT 0-75 FACTORY CONSULT STAINLESS FACTORY STEEL Inches Water Gauge and Absolute (1) BERYLLIUM CONSULT COPPER FACTORY VACUUM 0-30 Hg 0-15 psi 0-760mmHg 0-1 Bar kg/cm 2 COMPOUND VAC - PRESS. 15 Hg- 15 Hg 30 Hg- 30 Hg 30 Hg- 60 Hg 30 Hg-100 Hg 403 CONSULT 30 Hg-150 Hg ST. ST FACTORY 30 Hg- 15 psig BERYLLIUM 30 Hg- 30 psig COPPER 30 Hg- 60 psig 30 Hg-100 psig Hg-150 psig ST. ST. 30 Hg-300 psig (1) See Optional Features block on page 36 for Absolute Range price adder. Other non-standard ranges on application. For Optional Features see page 36. For ordering information see page 36. NEED RECERTIFICATION? STANDARD INLET FITTINGS: Back connected 1 4 NPT Female. The Heise Priority Recertification Coupon Program provides you with the option of purchasing coupons anytime for factory recertification of your Heise Precision Pressure Instrument. Recertification coupons are good for two years from date of purchase. The program provides the following benefits: Major Program Benefits Include: 5 working day turnaround for standard recertification All shipping labels supplied by Ashcroft Inc. Ashcroft Inc. paid return freight via second day air service If purchased with instrument initial purchase order covers instrument and recertification saving paperwork and discount price saves money Coupons may be redeemed for up to two years from date of purchase providing price protection See price sheet COUPON HE/PS-1 for pricing details.

36 REPLACEMENT PARTS List Price Sheet Supersedes List Price Sheet HE/PS-1/15 dated February 1, 2015 PRESSURE GAUGES GAUGES HE/PS-1/15A ADD TO OPTIONAL FEATURES BASE PRICE Special Scale $ Absolute pressure range Special calibration On Appl. Calibration other than vertical position Bourdon tube material other than standard Beryllium copper Model CC or CM 50 psig to 10,000 psig Model CMM 50 psig to 5000 psig Note: Beryllium copper recommended for hydrogen service 403 stainless steel under 50 psig Model CC, CM or CMM STANDARD INLET FITTINGS: Back Connected 1 4 NPT Female for all ranges up to and including 10,000 psig Back Connected Aminco or Autoclave F-250-C for ranges over 10,000 psig Optional connection fittings for ranges 10,000 psi or less Back Connected: Bottom Connected: Female: Female: 1 8 NPT 1 8 NPT AND NPT AND UNF-2B (1) UNF-2B (1) MS MS MS MS Male: Male: 1 8 NPT 1 8 NPT 1 4 NPT 1 4 NPT MS MS (per (per Mil-l-18997C) Mil-l-18997C) (1) For 1 4 high pressure tubing. Standard on ranges over 10,000 psig or 600 bar. Double scale (psi and inches of mercury, etc.) on Model CC and CM gauges only Colored Dial White Standard Colored Dial Black Temperature compensator Slotted link (for sudden release protection) Not available on vacuum gauges Peak load indicator on Model CC and CM gauges only Special cleaning for: General gas service Oxygen (gas or liquid) service To your specifications On Appl. Wall mounting brackets installed Carrying case 6 gauge 201B for bottom gauge 201B conn. gauges 12 & 16 gauge 201B Prices shown are net/subject to change without notice. Prices are subject to escalation. Orders subject to final acceptance at our works sales office. TERMS: 1%10, Net 30 Days. All prices are F.O.B. Stratford, CT. No Freight Allowed. Minimum order charge $ Visit our Rev. 7/1 36

37 List Price Sheet Applying to HVC-1000 and HVC-3000 Supersedes List Price Sheet HVC/PS-1/15 dated February 1, 2015 PRESSURE VOLUME CONTROLLERS HVC/PS-1/15A MODEL HVC-1000 Precision Pressure Volume Controller for use with pressures up to 1000 psi $ MODEL HVC-3000 Precision Pressure Volume Controller for use with pressures up to 3000 psi $ BENCH MOUNTING BRACKET for use with HVC-1000 and HVC-3000 (P/N 621X001-02) $ Visit our PRICES SUBJECT TO CHANGE WITHOUT NOTICE ALL PRICES SUBJECT TO ESCALATION Rev. 7/1 37

38 List Price Sheet Applying to HVC-1000 and HVC-3000 PRESSURE VOLUME CONTROLLERS Supersedes List Price Sheet HVC/PS-1/15 dated February 1, 2015 PARTS LIST HEISE MODELS HVC-1000 & HVC-3000 PRECISION PRESSURE VOLUME CONTROLLERS HVC/PS-1/15A ITEM QTY. PART NO. PER ASSY. NUMBER DESCRIPTION PRICE 1 1 Final Assembly X Actuator (1000 psi unit) $ a 1 603X Actuator (3000 psi unit) X Lead Screw (1000 psi unit) a 1 603X Lead Screw (3000 psi unit) X Washer, Actuator D Body X Valve Body X End Cap X Guide Screw ** 854X Pipe Plug ** 605X Socket Head Screw (valve) X Socket Head Screw X Washer A O-Ring X O-Ring X O-Ring * 607X O-Ring X O-Ring (1000 psi unit) a 1 607X O-Ring (3000 psi unit) A Back-up Ring X Back-up Ring X Retaining Ring X Spool Valve X Retainer Valve X Piston (1000 psi unit) a 1 614X Piston (3000 psi unit) X Label, Valve Control X Label (1000 psi unit) a 1 618X Label (3000 psi unit) X Knob, Adjustment X Knob, Balance Valve X Bearing, Ball Thrust ** 617X Mounting Kit, Panel ** 621X Table Mount Bracket (optional) X Sleeve (3000 psi unit) **Quantity is 2 in model HVC **Not shown. PRICES SUBJECT TO CHANGE WITHOUT NOTICE ALL PRICES SUBJECT TO ESCALATION Rev. 7/1 38

39 List Price Sheet Supersedes List Price Sheet HHP/PS-1/13 dated March 1, 2013 TP SERIES HAND ACTUATED PUMPS HHP/PS-1/15 Part Number Description Price LTP1 Pneumatic Pressure/Vacuum Pump, generates 24 in.hg vacuum to 30 psi pressure $ Includes: (2) hoses with 1 4 NPT-F termination Set of adapters: (2) 1 4 NPT-M x 1 8 NPT-M and (1) 1 4 NPT-M x 1 4 NPT-M 840X Replacement dual hose assembly for LTP Includes: (2) Quick Fit adapters for sides of pump body (2) bonded seal rings for Quick Fit adapters (2) hoses with Quick Fit connection (pump side) and 1 4 NPT-F termination Set of adapters: (2) 1 4 NPT-M x 1 8 NPT-M and (1) 1 4 NPT-M x 1 4 NPT-M 864X Carrying Case with foam inserts for LTP X Rebuild (seal) kit for LTP TP1 Pneumatic Pressure/Vacuum Pump, generates up to 29 in.hg vacuum to 365 psi pressure (normal use) 600 psi pressure (maximum effort) Includes: (1) hose with Quick Fit connection to pump body and 1 4 NPT-F termination 1 4 NPT swivel port on top of pump for connection of test instrument 840X Hose Kit for TP Includes: Quick Fit adapter for top of pump (replaces swivel) (1) hose with Quick Fit connection (pump side) and 1 4 NPT-F termination Set of adapters: (2) 1 4 NPT-M x 1 8 NPT-M and (1) 1 4 NPT-M x 1 4 NPT-M 864X Carrying Case for TP X NPT-F top port swivel for retrofit to older TP1 pumps X Rebuild (Seal) Kit for TP HTP1 Hydraulic Pressure Pump, generates up to 10,000 psi Includes: 1 4 NPT-F fittings on top and side port 840X Hose Kit for HTP Includes: (2) hoses (2) quick connect body assemblies (1) adapter for top port (2) quick connect adapters x 1 4 NPT-F Set of adapters: (2) 1 4 NPT-M x 1 8 NPT-M and (1) 1 4 NPT-M x 1 4 NPT-M 864X Carrying Case with foam inserts for HTP1 and accessories POV SERIES DPOV-VK Vacuum Pump Kit* to 23 in.hg vacuum DPOV-PK Pressure Pump Kit* to 60 psi APOV-PK Pressure Pump Kit* to 220 psi *Each kit includes two 3 ft. hoses and adapters to connect to 1 8 NPT female thread fitting 840X Check Valve Kit, converts DPOV-Vacuum Pump to DPOV-Pressure Pump X Check Valve Kit, converts DPOV-Pressure Pump to DPOV-Vacuum Pump ACCESSORIES FOR POV SERIES PUMPS: (Connections not compatible with TP Series) 840X Hose, 3 foot length, provides UNF female fitting X Hose, 5 foot length, provides UNF female fitting HOSE FITTING ADAPTERS FOR POV SERIES PUMPS: Part Number Adapts UNF female fitting on hose to: 840X NPT Male X NPT Male X NPT Female X NPT Female X tube fitting X Fittings Kit (one of each of the above) ADDITIONAL PLUMBING ACCESSORIES FOR USE WITH ALL MODELS (except HTP1) 856X Fitting Kit includes (2) 1 8 NPT male x 1 8 barb (1) 1 8 NPT male x 1 8 barbed tee, (1) 1 8 NPT male x 1 8 NPT female tee (2) 1 8 NPT male x 1 4 NPT female, (2) 1 8 NPT male x 1 8 NPT male X way vent valve, for venting system without disconnecting fittings PRICES SUBJECT TO CHANGE WITHOUT NOTICE ALL PRICES SUBJECT TO ESCALATION 39

40 40

41 TO REDEEM RECERTIFICATION COUPONS: ONE HEISE RECERTIFICATION COUPON Precision Products Only 1. Determine the number of coupons required. (See COUPON HE/PS-1) 2. Fill out the information requested on the bottom of one of the recertification coupons. 3. Place coupons in envelope and pack with instrument being returned for certification. 4. Place Priority Service Recertification label with factory address on box and ship to Ashcroft Inc. Registration Number Expiration Date Account No. WHAT WILL HAPPEN WHEN YOUR INSTRUMENT IS RECEIVED AT ASHCROFT INSTRUMENT: 1. Your instrument will receive priority expedited service. 2. Your NIST traceable certification will be packed with your instrument for return shipment. 3. Your instrument and certification will be returned to your facility via UPS Blue at the expense of Ashcroft Inc. RETURN INSTRUMENT TO: ASHCROFT INC. 250 East Main Street Stratford, CT Phone: Fax: Company Name: Street Address: City: State: Zip: Country: Mark for: Contact Name: Phone: Fax: Address: P.O. Number 41

42 Registration No. Expiration Date Account No. ONE Heise Recertification Coupon (Precision Products only) To Redeem Recertification Coupons: 1. Determine the number of coupons required. 2. Fill out the information requested on the bottom of one of the recertification coupons. 3. Place coupons in envelope and pack with instrument being returned for certification. 4. Place Priority Service Recalibration label with factory address on box and ship. What will happen when your instrument is received at Ashcroft: 1. Your instrument will receive priority expedite service. 2. Your NIST traceable certification will be packed with your instrument for return shipment. 3. Your instrument and certification will be returned to your facility via UPS Blue at the expense of Ashcroft Inc. Return instrument to: Company Name Street Address City State Zip Mark for Contact Name Tel. P.O. (if applicable) Address 42

43 List Price Sheet HEISE PRIORITY RECERTIFICATION COUPON PROGRAM COUPON HE/PS-1/15A The Heise Priority Recertification Coupon program provides you with the option of purchasing coupons anytime for factory recertification of your Heise Precision Pressure Instrument. Recertification coupons are good for two years from date of purchase. The program provides the following benefits: 5 working day turnaround for standard recertification All shipping labels supplied by Ashcroft Inc. Ashcroft Inc. paid return freight via second day air service If purchased with instrument initial purchase order covers instrument and recertification saving paperwork and discount price saves money Coupons may be redeemed for up to two years from date of purchase providing price protection Coupon Pricing: Standard Price $125 per coupon $115 per coupon if ordered with instrument purchase $115 per coupon if ordered in quantities of 12 or more Service/Product Type Standard Recertification Heise Dial Gauge Number of Coupons Required Ranges up to and including 10,000 PSIG 2 Absolute, Vacuum, Compound or Ranges over 10,000 PSI 3 Heise PTE-1 Base Unit (No extra charge for as found ) 1 Heise ST-2H Base Unit (No extra charge for as found ) 1 Heise HQS-1, HQS-2 Pressure Module ±0.1% Accuracy 1 ±0.05 & ±0.06% Accuracy 2 ±0.025% Accuracy 3 Heise HQS-RT Module 1 Heise PM Indicator ±0.1% Accuracy 1 ±0.05 & ±0.06% Accuracy 2 ±0.025% Accuracy 3 Heise DXD Transducer Gauge Pressure Type 1 Absolute, Compound or Vacuum Pressure Type 2 Heise HPO Transducer & Series 620 Transducer Gauge Pressure Type 1 Absolute, Compound or Vacuum Pressure Type 2 Heise Series 9 Indicator 901A, 710A, 730A, ATS2000 All Pressure Types 2 Heise Series 9 Indicator 901B, 71OB, 730B All Pressure Types 3 As Found Certification Adder All Products 1 Rev. 7/1 43

44 44

45 REPLACEMENT PARTS List Price Sheet Supersedes List Price Sheet HDTG-1/PS-1/15 dated February 1, 2015 TYPES 3084, 3086 & 3089 PRECISION DIGITAL TEST GAUGE HDTG-1/PS-1/15A TYPE & ACCURACY PRICE % F.S. $ Total Error Band % F.S. $ Total Error Band % F.S. $ Total Error Band AVAILABLE PRESSURE RANGES psi psi psi bar/kg/cm 2 bar (Gauge) (Compound) (Absolute) (Gauge) (Compound) vac. 15/ / / / DESCRIPTION CODE LIST PRICE Optional Features Weatherproof ABS Gauge Carrying Case (One Gauge per Case) S7 $ Flange for Panel Mounting FF Protective Rubber Boot (Black) B Protective Rubber Boo (Orange) B Metal Tag Wired to Case NH Paper Tag Bonded to Case NN 3.46 Cleaned for Gaseous Oxygen Service 6B Standard w/type 3089 Individual Certified Calibration Chart C net per gauge for Types 3084 and 3086 mmh2o mpa mbar/cmh2o kpa (Gauge) (Gauge) (Gauge) (Gauge) , ,000 Visit our SEE REVERSE SIDE FOR ORDERING INSTRUCTIONS PRICES SUBJECT TO CHANGE WITHOUT NOTICE ALL PRICES SUBJECT TO ESCALATION Rev. 7/1 45