Step 2: Cut to measured lengths and install into the desired location. Step 3: Apply an extension cable to connect each section within each channel

Transcription

1 Incorporates High Luminous Flux Flexible -wire design Minimum cut length of Maximum bend radius of 0.2 Single Color Long life and energy saving Low voltage Easy to install LF(V)-A-- 50 Single Color ((LED) hite, ed, reen, lue, ellow 0.2 Installation Example Letter Channel Connection Examples Step : Measure the internal lengths of each letter Prepare draft layout with detailed markings for accuracy Calculate total power consumption Choose the appropriate power supply LED Channel Flex Step 2: Cut to measured lengths and install into the desired location Linear Connection ight Angle Connection Curved Type Connection () Cut only on printed cut marks (2) Power Supply Connection () Middle connecting pin () Extension Cable Connection (5) End cap sheathing (6) Mounting Clip Usage (Screw Type) (-ire Flexible)(Super right LED) (Low-Voltage) FL(V)-A-- Step : Apply an extension cable to connect each section within each channel LED Channel Flex is an energy efficient, flexible PC, single color, low voltage, LED linear signage channel illumination solution. LED Channel Flex comes in single color ((LED) hite, ed, reen, lue, and ellow.. The flexible -wire design affords a minimum cut length of, and maximum bend radius of 0.2 makes the LED Channel Flex ideal for single color channel illumination. Step : Apply an extension cable to connect letters together LED Channel Flex is easy to install in linear or curved channel and complex channel applications using the specially designed mounting clips. The LED Channel Flex mounting clips can be glued, screwed or affixed with double sided adhesive tape. Step 5: Connect end lead to power supply Demo Case Available (Sold Separately) Step 6: Connect power supply to mains to illuminate (7) Mounting Clip Usage (Double Sided Tape) Flight Case by Neo-Truss and Case 6 7 LED Channel Flex Unit Length Qty. of LEDs per unit Unit Length Max. No.of unit per roll Colors Operating Current

2 LED Channel-PC Type (Vertical) LC-L-00- LED Channel-PC Type (Vertical) is an edge breaking decorative lighting solution. It adopts ø5 LED mounted on PC vertically(pcs or 5pcs based on different voltages) as light source. LEDs are available in the colors of red, yellow, white, green and blue colors. The cable length between 2 units can be customized as requirements. It can be widely applied in applications such as cove lighting, backlight and some other signage illumination to be sign, channel letters, advertisement sign, warning sign and instruction sign. It can be easily mounted with double-side tape or screws. Step 2: Cut to measured lengths and install into the desired location 8 Incorporates High Luminous Flux Cut to 7.6 and 50.mm (LED Color Dependant) After cut a male connector remains to interconnect sections Single Color Long life and energy saving Low voltage Easy to install LC-L-00--//// () (, ) 5 50.mm 7.6mm 00x0mm 00x0mm 00mA 60mA mm 2mm Connection Examples Step : Apply an extension cable to connect each section within each channel Linear connection ight Angle Connection Curved Type Connection () Cut only on printed cut marks (2) Power Supply Connection () Extension cable connection () Mounting Clip Usage (Screw Type) (5) Mounting Clip Usage (Double Sided Tape) Step : Apply an extension cable to connect letters together Color Qty. of LEDs per unit Unit Length Size/Unit Operating Current/unit /unit Max Qty. of LEDs/ 2A PSU LED Spacing Step 5: Connect end lead to power supply Step 6: Connect power supply to mains to illuminate (6) Power Supply 9 LED Channel-PC Type (Vertical) Step : Measure the internal lengths of each letter Prepare draft layout with detailed markings for accuracy Calculate total power consumption Choose the appropriate power supply Installation Example Letter Channel

3 LLU(FX)-V-60 - Unit Length.5.92 /Ft Total LED Qty/oll 0 Operating Current 00mA LED Spacing /2 Length in oll 60Ft Qty. of LEDs per unit Colors Single Color ((LED) hite, ed, reen, lue, ellow Max. Length 2.5Ft (with 2.5A Switch Power) LED Channel Flex PC (Flexible PC) (Super right LED) (Low-Voltage) LLU(FX)-V60ʼ- LED Channel Flex PC is a energy effi cient, fl exible PC, single color, low voltage, LED linear signage channel illumination solution. Installation Example Letter Channel Step : Measure the internal lengths of each letter Prepare draft layout with detailed markings for accuracy Calculate total power consumption Choose the appropriate power supply Step 2:Cut to measured lengths and install into the desired location Step : Apply an extension cable to connect each section within each channel Connection Examples LED Channel-Flex PC Type(Vertical) can be bent easily into any angle with its high flexibility. Fixing clip makes the shape perfect and steady. Linear Connection ight Angle Connection Curved Type Connection LED Channel Flex PC LED Channel Flex PC comes in single color ((LED) hite, ed, reen, lue, and ellow.. The fl exible PC design, minimum cut length of approximately.5 for and for 2V respectively, and maximum bend radius of 0.2 makes the LED Channel Flex PC ideal for single color channel illumination. Step : Apply an extension cable to connect letters together () Cut only at the mark. (2) Connect the transformer and LED Channel-Fex PC Type(Vertical) together with connector. () Connect two parts with extension cable LED Channel Flex PC is easy to install in linear or curved channel and complex channel applications using the specially designed mounting clips. The LED Channel Flex PC mounting clips can be glued, screwed or affi xed with double sided adhesive tape. Incorporates High Luminous Flux Flexible PC design Minimum cut length of.5 or (voltage dependant) Maximum bend radius of 0.2 Single Color Long life and energy saving Low voltage 2 and 2V Easy to install Step 5: Connect end lead to power supply Step 6: Connect power supply to mains to illuminate () Fix with screw if necessary. (5) Stick with double sided tape

4 (Super right LED) (Single Color) Connection Examples Step : Measure the internal lengths of each letter and prepare draft with marking in order to precisely install LED Flexible Listel Light. Calculate carefully the total power consumption to choose the appropriate power supply Step 2: Cut the LED Flexible Listel Light into suitable lengths and install them on the letters Linear Connection (Low Voltage) (Outdoor) ight Angle Connection Curved Type Connection (2) Power Supply Connection () Mounting Clip Usage (Screw Type) LED Flexible Listel LED Flexible Listel How To Install On Letter Sign FLF-99-M- Minimum workable unit is pcs LED LED Flexible Listel is an energy efficient, flexible, copper core silicone coated, single color, low voltage, LED linear signage channel illumination solution. LED Flexible Listel comes in single color ((LED) hite, ed, reen, lue, and ellow.. LED Flexible Listel enables you to mix and match LED colors to produce a static multi-color effect. The flexible silicone coated copper core design enables both flexibility and an rating for outdoor application. The silicone cover also increases heat dissipation. LED Flexible Listel is easy to install in linear or curved channel and complex channel applications using the specially designed mounting clips. The LED Channel Flex mounting clips can be glued, screwed or affixed with double sided adhesive tape. Color of LED LED Qty/Unit Lumens/ unit Current/Unit Max units with 2.5A switch power IP rating 60 LED-FLF-99-M- LED-FLF-99-M- LED-FLF-99-M- LED-FLF-99-M- LED-FLF-99-M x7.6x2mm 7.92 x7.6x2mm 7.92 x7.6x2mm 7.92 x7.6x2mm 7.92 x7.6x2mm Step : Use extension cable to connect each section of LED Flexible Listel Light in each channel () Extension Cable Connection Step : Use extension cable to connect those letters together Step 5: Connect to power supply. The wires between two LED Flexible Listel Light should not be longer than.5 meters Step 6: Plug to light up the sign Incorporates High Luminous Flux Flexible Copper Core Silicone Coated Housing Single Color or Mix and Match for Static Multi Color Long life and energy saving Low voltage 2 V Easy to install () Mounting Clip Usage (Double Sided Tape) 6

5 for: LLS-AL-CC50 LED acklight S HP (Square) (High Power LED) (Single Color) (Low Voltage) (Outdoor) LLS-AL-CC50 LLS-PL-CC50 * La Foirfomille Supermarket, La ochelle, France Incorporates High Power LEDs High Luminous Flux Highly Effi cient Heat Dissipation Epoxy Sealed Fixture Single Color Long life and energy saving Low voltage 2 V Easy to install Installation Example Letter Channel. Connect Driver to product 2. Add additional sections of the product ensuring proper connection of the wires. LED acklight S HP for: LLS-PL-CC50 LED acklight S HP is a energy effi cient, mm square coated puck,, single color, low voltage, outdoor, LED linear signage backlighting solution. LED acklight S HP comes in single color ((LED) hite, ed, reen, lue, and ellow) High Power () LEDs. LLS-AL-CC50 LLS-PL-CC50 LED acklight S HP come with two back plate variants which are Aluminum (AL) and Plastic (PL) which offer two different price points and variables in heat dissipation considerations. The LED acklight S HP puck is epoxy coated making it rated and suitable for outdoor all weather backlight illumination solutions for signage.. Install onto the backing of the sign. Connect Driver to mains to illuminate Light source Color of LED LED qty/unit Input voltage Lumens/ unit Power consumption Current/pc Driver IP rating LLS-PL-CC50- high power LED 9V 6 50mA xxmm LED acklight S HP is easy to install with simple and the LED acklight S HP pucks can be glued or affi xed with double sided adhesive tape. LLS-PL-CC50- high power LED 9V 25 50mA xxmm LLS-PL-CC50- high power LED 9V 6 50mA xxmm LLS-PL-CC50- high power LED 9V 0 50mA xxmm LLS-PL-CC50- high power LED 9V 5 50mA xxmm 62 6

6 Incorporates Super or Super right LEDs High Luminous Flux Highly Efficient Heat Dissipation Epoxy Sealed Fixture Single Color Long life and energy saving Low voltage 2 V Easy to install LED acklight S-SF-S (Square) Connection Example () Adjust puck spacing according to your applications needs (2) Cover the end wires with end cap () Fasten ires to surface with M terminal blocks () Apply Double Sided Tape to the base of the Puck (5) Connect to the appropriate switching power supply, please page (Super and Super right LEDs) (Single Color) (Low Voltage)(Outdoor) LLS-AL-P--//// LLS-AL-2P--//// LED acklight S-SF-S- are energy efficient, 6x9mm square coated puck,, single color, low voltage, outdoor, LED linear signage backlighting solution. LED acklight S-SF-S- comes in single color ((LED) hite, ed, reen, lue, and ellow) and incorporates x either Super or Super right LEDs. LED acklight S-SF-S- is comprised of an Aluminum (AL) back plate which offers highly efficient heat dissipation. The LED acklight S-SF-S- puck is epoxy coated making it rated and suitable for outdoor all weather backlight illumination solutions for signage. LLS-AL-P-- LLS-AL-P-- LLS-AL-P-- LLS-AL-P-- LLS-AL-P-- LLS-AL-2P-- LLS-AL-2P-- LLS-AL-2P-- LLS-AL-2P-- LLS-AL-2P-- 6 LED acklight S-SF-S- is easy to install with simple and the LED acklight S-SF-S- pucks can be glued or affixed with double sided adhesive tape. Note: eference P in the part number which indicates Super type, and 2P which indicates Super right type LEDs. LED LED color lm/unit Voltage Currentunit 80mA 80mA 0mA 0mA 0mA 0mA 0mA 0mA Power/unit LED qty 6XX9 6XX9 6XX9 6XX9 6XX9 6XX9 6XX9 6XX9 6XX9 6XX9 Note Make certain you calculate the necessary drive current and choose the appropriate power supply from the list of power supplies below. Connection Diagram Max PCS with driver IP ating 20PCS 20PCS 0PCS 0PCS 0PCS 0PCS 0PCS 0PCS 65 LED acklight S-SF-S * estaurant Tir kashtana in Hotel ussia, ussia, Moscow. Photo supplied by company of ponedelnic.

7 Single Color Super right LED acklight -SF-S- are energy efficient, 6xmm rectangular coated puck,, single color or, low voltage, outdoor, LED linear signage backlighting solution. LED acklight -SF-S- comes in single color ((LED) hite, ed, reen, lue, and ellow) or color changing via the SL-0 or the SC-8 controllers and incorporates X either Super or Super right LEDs. Incorporate the version of the SC-8- Page# of this catalog for full color changing effect control via DMX 52. LLS-PL-2P- Connection Example () Adjust puck spacing accord- (2) Cover the end wires with ing to your applications needs end cap () asten ires to surface with M terminal blocks Single Color with Super For more information on the SL-0 controller and its functionality refer to Page LED acklight -SF-S- of a plastic (PL) back plate which offers highly efficient heat dissipation. The LED acklight -SF-S- puck is epoxy coated making it rated and suitable for outdoor all weather backlight illumination solutions for signage. () Apply Double Sided Tape to the base of the Puck LED acklight -SF-S- is easy to install with simple and the LED acklight -SF-S- pucks can be glued or affixed with double sided adhesive tape. LLS-PL-P- Note: eference P in the part number which indicates Super type, and 2P which indicates Super right type LEDs. Type (5) Connect to the appropriate switching power supply (6) Connect switching power supply to mains and apply power Circuit Layout LED LLS-PL-2P-- LLS-PL-2P-- LLS-PL-2P-- LLS-PL-2P-- LLS-PL-2P-- LLS-PL-P-- LLS-PL-P-- LLS-PL-P-- LLS-PL-P-- LLS-PL-P-- LLS-PL-2P-- 66 LED color: lm/ unit Voltage Current/ unit 0mA 0mA 0mA 0mA 60mA Power/ unit LED qty 6 Max connected piece with 2A switch power 0PCS 0PCS 0PCS 0PCS 26PCS IP ating Notes LLS-PL-2P-- the height of the letter is not less than cm. The distance to achieve best effect is between the modle and acryl is not less than cm. 67 LED acklight -SF-S (ectangular)(super and Super right LEDs) (Single Color and )(Non-Direct DMX ) (Low Voltage)(Outdoor) LLS-PL-2P--//// LLS-PL-P--//// LLS-PL-P-- LED acklight -SF-S

8 * Neo-Neon(tm) Hotel, Jiangmen, P.. China * Neo-Neon(tm) Hotel, Jiangmen, P.. China Applied to sign side illumination LED Edge L-SF-S Color Change Type (Linear) (Super and Super right LEDs) LED Edge L-SF-S- are energy efficient, 200xmm linear PC modules, single color or, low voltage, indoor, LED linear backlighting and edge illumination solution. LED Edge L-SF-S- comes in single color ((LED) hite, ed, reen, lue, and ellow) or color changing via the SL-0 or the SC-8 controllers and incorporates X either Super or Super right LEDs. Incorporate the version of the SC-8- Page# XXXX of this catalog for full color changing effect control via DMX 52. For more information on the SL-0 controller and its functionality refer to Page LED Edge L-SF-S- is easy to install with simple and the LED acklight -SF-S- pucks can be glued or affixed with double sided adhesive tape. LED Edge Lite- AS-0x5-- Note: eference P in the part number which indicates Super type, and 2P which indicates Super right type LEDs. Incorporates Super or Super right LEDs High Luminous Flux Highly Efficient Heat Dissipation Single Color Controllable in standalone or DMX-52 Long life and energy saving Low voltage 2 V Easy to install AS-0X5-- 2 AS-80X5-(controller) LED Edge L-SF-S LED Edge Lite-Single Color LLU-200- (Single Color and )(Non-Direct DMX ) (Low Voltage)(Indoor) LLU-200--,,,, AS-0x5-- * Neo-Neon Hotel Color of LED LED Qty/Unit Current/Unit Max units with 2A driver LLU-200- super Single color,, 00mA/ PC.2 200Xmm Single Color Type 6PCS Color of LED LED Qty/Unit Current/Unit Max. Length Controller AS-0X5-- SMD LED 0 60mA 0.72/unit 0X5mm 26PCS (with 2A Switch Power) 80X5mm AS-80x5-69