Synergy 21. LED Flex Strip 1. Features

Transcription

1 1. Features - Used 5050 TOP SMD RGB or signal color with three chip in one LED as lighting resources PCS LED / 300PCS LED / LED 5MM - Size: 5000X10MM / 5000X12MM - Available RGB/Red/Green/Blue/Yellow/Pure White & Warm White - Input Voltage: 12V or 24V - Max power 36W / 72W - Can be cut by 3 LED (DC 12V) and 6 LED (DC24V) and connect again by our accessories - With 3M adhersive tape back, easy for installation - Can be change into waterpoof with type A and type B - Can be chosen copper PCB or white PCB 2. Applications - Cover lighting - Architectural light for canopy, corridor, window, archway - Backlight for edge lighting for signage - DIY lights for home use - Path and contour marking - Decorative lights for holiday, event, show exhibition

2 3. Dimension 12V 4. Dimension 24V 5. Parameter Part Number Color Light Output (±15%) Lux (±15%) dλ(nm)/tc(k) Pure White 300x4500MCD 300x15LM K Warm White 300x400MCD 300x12LM K Red 300x1600MCD 300xLM nm Green 300x3500MCD 300x10LM nm Blue 300x1200MCD 300x5LM nm Yellow 300x1500MCD 300x6LM

3 6. Dimension (12V) 7. Dimension (24V) Part Number Color Light Output (±15%) Lux (±15%) RGB 300x200MCD 300x8LM dλ(nm)/tc(k)

4 8. Small Controller System 9. Small Controller System > Working temperatur: degree > Working Voltage: DC12V > Connection: Common Anode > Output: 3-loops > Static Power consumption: <1W > Output current: <6A (per loop) > Output power: 12V<216W

5 10. Connect Drawing TYPE-RGB 11. Controller Instruction The control system consists of switching power supply, controller, remote control, strip form. It can be run stand-alone, but also through the amplifier with the realization of large-scale connections. Users can remote control to choose their own procedures for the needs of lighting effects. Can be achieved through No1 key with machine functions; No2 keys can be suspended by the system; through the No3 can speed up the speed of currently running programs; No5 keys can be increased by the brightness of light; No6 keys can be reduced by the brightness of light; through the seven keys to switch No7 kinds of color modes; No8 keys can be achieved through a variety of dynamic coor mode switch.

6 12. Big Controller System > Working temperature: degree > Working Voltage: DC12V; DC24V > Connection: Common Anode > Connection Agreement: DMX512/1900 > Control mode: Unit-control; multi-machine on-line acess, through the use of DMX512 console > System Channels: 5CH (being white, warm white, warm white is white, stobe, speed) > Grayscale output: 256 class > Static Power consumption: <1W > Output current: <6A (per loop) > Output power: 12V<216W; 24V<432W 13. Connect Drawing

7 14. Connect Instruction The control system consists of switching power supply, controller, eremote control, GL light of the composition. It can be run stand alone, you can aslo run multiple machines on line, but also can be controlled by DMX512 control units to run. Detailed operation please refer to Type E specifications. User can also remote cotnrol co-ordination to achieve a variety of lighting effexts. No1 key can be removed through the No2 keys can confirm that the current set program number and the preservation of its calue; the remaining six the number keys through the addition operation can be combined into any one of the procedures required number, maximum Accessoies Item Part No Decription 1 Type T2 20P joined connector with wire 2 Type T1 20P joined connector 3 Type T3 24P joined connector with wire 4 Type T4 24P joined connector

8 16. Waterproof Features: > Used Silicone Tube for waterproof > Ip67 > Can be cut and connect again use our accessories > Has waterproof connector each end

9 17. Accessoies Item Part No Decription 1 Type-Q6 screw 2 Type-Q5-10 end cap with 4x10.5 hold 3 Type-Q3-10 chip 4 Type-Q2 one silicon glue 5 Type-T5-RGB four colored lines 19. Waterproof Features: 1. Used Silicone material as waterproof material, totally environment friendly 2. Keep good performance underwater, IP67 3. KEEP FLEXIBLE BELOW ZERO DEGREE 4. Never change color after long time end 5. With waterproof connector each end 6. Can not be cut

10 18. How to do If you need cut and seal one side, pls follow the step: A1-A2-A3-B1-B2 If you need cut and install waterproof connector at one side, pls follow the step: > A1-A2-A3-C1-C2-C3-C4-C5 > A1: Cut the light striat the mark scissors or by 3 leds > A2: Screw the glue cap > A3: Use the thrust (another side of glue cap) puncture the surface. > B1: Inject the silicon gel > B2: Push the cap to the strip, dry for 1 hour > C1: Put the connector wire through the end caps`s hole > C2: Solder the wire on the PCB (pls sure the solder temperature is 260 C and whitin 10 sec > C3: After solder the two wires, push the cap to the carefully > C4: Inject the silicon glue at the end of strip and cap > C5: Make sure end cap and strip bond well, dry for 1 hour