Power Supplies. PS5R Standard Series Switching Power Supplies. Part Numbers. Part Number
|
|
- Tabitha Cobb
- 5 years ago
- Views:
Transcription
1 Standard Series Key features: Wide power range: 7.W-24W Universal input : 7.W-W: 8-264V AC/1-37V DC 1W: 8-2V AC/17-264V AC 24-37V DC (selectable) W, W, 24W: 8-264V AC/11-3V DC Overcurrent/overvoltage protection Power Factor Correction (W, W, 24W models) EN EN adjustment +1% Spring-up crew terminal, IP2 (finger-safe) DIN rail or panel surface mount Approvals: CE marked UL 8 Listed c-ul TÜV approved EMC Directives: EN81-2 EN82-2 EN LVD EN9:2 Style Watts Current Standard Series Switching Part Number V DC 1.A -A V DC.6A -A 24V DC.3A -A24 V DC 2.A -B V DC 1.2A -B 24V DC.6A -B24 V DC 2.A -C 24V DC 1.3A -C24 24V DC 2.1A -D24 Part Numbers Style UL 8 Listed File #E Cert No. BL Watts Current Part Number 24V DC 3.1A -Q V DC 4.2A -E24 24V DC A -F V DC 1A -G24 OI Touchscreens PLCs Automation Software Sensors Communication Barriers Phone: Fax: Web: info@clrwtr.com
2 Standard Series Specifications Barriers Communication Sensors Automation Software PLCs OI Touchscreens Model -A -B* -A -B -C -A24 -B24 -C24 -D24 -Q24 -E24 -F24 -G24 Output Capacity 7.W 1W 3W W W 1W W 24W Input Output Input (singlephase, 2-wire) Input Current (typical) 1 to 24V AC nominal (8 to 264V AC), /Hz (47 to 63Hz) 11 to 34V DC nominal (1 to 37V DC).17A at 1V AC.3A at 1V AC.68A at 1V AC 1.1A at 1V AC 1.1A at 1V AC 1 to V AC, /Hz 2 to 24V AC, /Hz (jumper selectable) 24 to 37V DC 2.A at 1V AC 1.A at 2V AC 1 to 24V AC, /Hz, 11 to 34V DC 1.8A at 1V AC Internal Fuse Rating 2A 2A 3.1A 3.1A 3.1A 4A 4A 6.3A Inrush Current Leakage Current (at no load) Typical Efficiency Overvoltage Protection and Current Ratings A maximum (at cold start at 2V AC) V, 1.A V,.6A 24V,.3A 69% at V % at V 79% at 24V V, 2.A V, 1.2A 24V,.6A 7A maximum (at cold start at 23V AC) A maximum (at cold start at 2V AC).mA maximum (Hz, measured in conformance with UL, CSA, VDE) % at V % at 24V V, 2.A 24V, 1.3A 4A at 1V AC 7A maximum (at cold start at 23V AC) 79% at 24V 83% at 24V 8% at 24V 83% at 24V Outputs turns off at 1% (typical) 24V, 2.1A 24V, 3.1A 24V, 4.2A 24V, A 24V, 1A Adjustments ±1% ( screw on top) Output Holding Time 2ms minimum (at full rated input and output) Rise Time 2ms maximum (at full rated input and output) 1ms max. Line Regulation.4% maximum Load Regulation 1.% maximum Fluctuation due to Ambient Temperature.% maximum Change Ripple 2% peak to peak maximum (including noise) Overload Protection % typical (Zener-limiting) % typical, auto reset Operation Indicator LED (green) Parallel Operation -A -B -C -D -Q -E -F -G Allowed No Yes No Yes Between input and output terminals: 3,V AC, 1 minute Dielectric Strength Between input terminals and housing: 2,V AC, 1 minute Between output terminal and housing: V AC, 1 minute Insulation Resistance Between input and output terminals/input terminals and housing: 1MΩ minimum (V DC megger) Operating Temperature 1 to + C (14 to 14 F) (see derating curves) Storage Temperature 3 to +8 C (-22 to 18 F) Operating Humidity 2 to 9% relative humidity (no condensation) Vibration Resistance 4m/s 2, 1 to Hz, 2 hours on each of 3 axes 1 to Hz,.mm p-p, 2 hrs on each of 3 axes Shock Resistance 3m/s 2 (3G), 3 shocks in each of 6 directions Approvals Conforms to EMC Directives EN81-2 & EN82-2. LVD Directive EN29 Certified to EN9. UL8 listed. c-ul, TUV approved. CE marked. EN Weight 1g 17g 3g 39g 8g g g 2g Termination Spring-up, fingersafe terminals with captive M3. screws IP protection IP2 (finger safe) Dimensions H x W x D (mm) x 4 x 7 x 4 x9 x 9 x 9 x 9 x 9 x 8 x 14 x 14 x 9 x 11 x14 x 2x 14 Dimensions H x W x D (inches) 2.9 x 1.77 x For dimensions, see page For usage instructions, see page x 1.77 x 3. *.W for VDC model. 2.9 x 3.4 x 2.9 x 3.4 x 4.72 x 3.3 x x.71 x 4.72 x 4.3 x x 7.87 x.1 Phone: Fax: Web: info@clrwtr.com
3 Standard Series -A/B E F/G Operating Temperature ( C) Temperature Derating Curves -C/D Q Mounting Style B A Mounting (standard) Mounting Style A Mouting style A Vertical B Mounting (Facing Upward) Vertical OI Touchscreens PLCs Automation Software Sensors Communication Barriers Phone: Fax: Web: info@clrwtr.com
4 Standard Series OI Touchscreens Accessories Part Numbers: Accessories Appearance Description Part Number DIN rail (1mm) BNDN1 Overcurrent Protection Characteristics -A/B Output (%) 1 PLCs DIN rail end clip BNL 11 Installation Instructions -C/D/E Time-Saving Spring-up Terminals 1 Automation Software The innovative terminals on the series use a spring-loaded screw. This makes installation as easy as pushing down and turning with a screwdriver. Installation time is cut in half since the screws do not need to be backed out to install wiring. The screws are held captive once installed and are 1% finger-safe. Screw terminals accept bare wire or ring or fork connectors. 1. Insert the wire connector into the slot on the side of the power supply. Output (%) 1 1 Sensors 2. Using a flat head or Phillips screwdriver, push down and turn the screw. The wire is now connected, and the screw terminal is fingersafe! Front Panel (terminals) Markings Name Description V. ADJ adjustment Operation indicator Adjusts within ±1%; turn clockwise to increase output voltage Green LED is lit when output voltage is on + - Parallel Operation TERMINALS ELECTRICAL LOAD Communication +V, V L, N DC output terminals Frame ground Input terminals No connection +V: Positive output Terminal V: Negative output terminal Ground this terminal to reduce high-frequency currents caused by switching Accept a wide range of voltages and frequencies (no polarity at DC input) Do not insert wires here, as this may damage the power supply Barriers 1. Parallel operation only recommended for -Q24, -F24 and -G Factory recommended diode ST Microelectronics BYV4V-, BYV4V-1, BYV4V-2, BYV41V-2 or with equivalent electrical specifications. 3. Using the voltage adjustment make sure out-voltage is the same for all power supplies. Phone: Fax: Web: info@clrwtr.com
5 Standard Series 62. R2.2 6-ø V Dimensions -A (7.W) -B (1W) -C (3W) 1-ø R2.2 6-ø ø6. -D (W) -Q (W) -F (W) -E (1W) 14-ø6. Terminal Markings -A/B -C/D/Q/F/G -E -V +V L N V +V L N -G (24W) V +V 1w-OUTPUT VOLTAGE SELECT L N 2-24V 1-V OI Touchscreens PLCs Automation Software Sensors Communication Barriers 2-24V Phone: Fax: Web: info@clrwtr.com
PS5R Series Switching Power Supplies. The PS5R offers a sleek, compact, ergonomic design, worldwide approvals, and broad range of output capacities.
Switching Power Supplies The offers a sleek, compact, ergonomic design, worldwide approvals, and broad range of output capacities. With U 508 isting, additional savings in space and cost can be realized
More informationPage Housing Plastic Metal Mounting DIN Rail or surface mount Panel or bracket mount Wattage Range 10W to 240W 7.5W to 240W 10W to 300W
Selection Guide Selection Guide PS5R Slim Line PS5R PS3L Operator Interfaces Communication & Networking PLCs NEW Models Appearance Automation Software Page 107 113 118 Housing Plastic Metal Mounting DIN
More informationSwitching Power Supply
Switching Power Supply Highly Reliable and Full-functioned 1-year Life Expectancy, 12, 1, or 24 V output voltages, and 30, 60, 0, or 10 W power ratings. 8 to 132 VAC or 170 to 264 VAC switchable input
More informationCommunication & Networking
MicroSmart Master Module Capable of Connecting 62 Slaves Compliance with Ver. 2.1 specifi cations Digital and analog slaves can be connected. Configuration and slave monitoring can be done using LED indicators
More informationCommunications & Networking
is a type of field bus that is primarily intended to be used to control sensors and actuators. is a network system that is compatible with the IEC62026 standard. A master device can communicate with slave
More informationSwitching Power Supply S8E1. Ordering Information. Compact and Economical Switching Power Supply
Switching Power Supply Compact and Economical Switching Power Supply Models range from 10 to 50 W Open-frame and covered types Wide range of output voltage: 5-, 12-, 15- and 24-V models UL, CSA approved
More informationFunctional configuration Rated input voltage Power ratings Output voltage Output current Part number Non-PFC
Switching Power Supply DIN-Rail Mount Power Supply With Capacity Up to 240 W for General or Industrial Applications Wide power range: 15 to 240 W 15 W and PFC Models with Universal voltage of 100 to 230
More informationVoltage Current Front-mounting bracket
Switching Power Supply S8PS Compact DIN-Rail Mounting Industrial Power Supplies with Capacities Up to 600 W Models range from 0 W to 600 W. Universal input: voltage range 0 to 240 VAC. Power Factor Correction
More informationS8VE (60/90/120/180/240-W Models)
Switch Mode Power Supply S8VE (60/90/120/180/240-W Models) CSM_S8VE_DS_E_1_1 60/90/120/180/240-W Models Improved Versions of Standard-type Power Supplies without Indication Monitor. Safety standards: UL508/60950-1,
More informationSwitching Power Supply
Switching Power Supply Miniature, Thin Power Supply to Be Built into Equipment Half the size of OMRON s conventional power supply. PCB-type and connector-type models available. UL, CSA approved. Conforming
More informationSwitch Mode Power Supply S8VT 120/240/480/960 W Models
Switch Mode Power Supply 120/240/480/960 W Models Natural Cooling Three-phase Power Supply Range from 5A up to 40A with Output Voltage of 24VDC 3 phase 400 to 500 VAC 5, 10, 20 and 40 A; 24 VDC output
More informationSwitching Power Supply S82J. Ordering Information. Open-Frame, Covered-Frame, or Enclosed-Frame Type with Capacity Up to 600 W
Switching Power Supply Open-Frame, Covered-Frame, or Enclosed-Frame Type with Capacity Up to 600 W Models range from 10 to 600 W UL 508 approval on 100-W 150-W, 300-W, and 600-W models Wide range of output
More informationTimers. RTE Series. RTE Series Analog Timers. Specifications. G-8 USA: (800) 262-IDEC or (408) , Canada (888) 317-IDEC
Analog Timers Key features of the RTE series include: time ranges and timing functions ON-delay, interval, OFF-delay, one-shot Time delays up to 0 hours Space-saving package (." x." x.0") High repeat accuracy
More informationABL1REM24100 regulated SMPS - single phase V input - 24 V output W
Characteristics regulated SMPS - single phase - 100..240 V input - 24 V output - 240 W Complementary Input voltage limits Network frequency limits Inrush current Main Range of product Product or component
More informationABL1REM24025 regulated SMPS - single phase V input - 24 V output - 60 W
Characteristics regulated SMPS - single phase - 100..240 V input - 24 V output - 60 W Main Range of product Product or component type Power supply type Rated power in W Input voltage Output voltage Power
More informationOrdering Information. Three-phase Input Switch Mode Power Supply S8VT S8VT. Model Number Legend
Three-phase Input Switch Mode Power Supply S8VT DIN-rail mounting, Power Supply with a range of 5 A to 40 A output current 3 phase 400 to 500 VAC 5, 10, 20 and 40 A; 24 VDC output Higher stability, lower
More informationABL1RPM24100 regulated SMPS - single phase V input - 24 V output W
Characteristics regulated SMPS - single phase - 100..240 V input - 24 V output - 240 W Complementary Input voltage limits Network frequency limits Inrush current Main Range of product Product or component
More informationRelays & Sockets RR Series Power Relays. Part Number Selection
RR Series Power Relays Key features: SPDT through PDT, A contacts Midget power type relays Available in pin and blade terminal styles. Options include an indicator, check button for test operations and
More informationABL8REM24050 regulated SMPS - 1 or 2-phase V AC - 24 V - 5 A
Characteristics regulated SMPS - 1 or 2-phase - 100..240 V AC - 24 V - 5 A Complementary Input voltage limits Network frequency Inrush current Main Range of product Product or component type Power supply
More informationModel Number Structure. Ordering Information. Switch Mode Power Supply S82K (3/7.5/15/30/50/90/100-W Models) Model Number Legend.
Switch Mode Power Supply (3/7.5/15/30/50/90/100-W Models) CSM DS_E_3_1 Ultimate DIN-rail-mounting Power Supply with a Power Range of 3 to 100 W EMI: EN 61204-3 class B Input: 85 to 264 VAC (except 90-W
More informationS82S (3/7.5-W Models)
Switch Mode Power Supply (3/7.5-W Models) CSM DS_E_4_3 Miniature DIN Rail Mounting DC-DC Power Supplies 65 mm depth enables mounting onto control panels with 100 mm depth. Inputs: 10.2 to 27.6 VDC (DC
More informationABL8REM24050 regulated SMPS - 1 or 2-phase V AC - 24 V - 5 A
Characteristics regulated SMPS - 1 or 2-phase - 100..240 V AC - 24 V - 5 A Main Range of product Product or component type Power supply type Input voltage Output voltage Rated power in W Input protection
More informationStandards VDE: EN60950; UL1950; C-UL: CSA C22.2 No.234; IEC950; VDE0805
AC/DC Power Supply Multi-Output Wide range input for world-wide use (85 264 Vac). This series is a 2ch output model. Features Wide input voltage range: 85-264Vac 110-370Vdc High efficiency & reliability
More informationDIN Rail. user manual Models , & INT /503556/ UM
DIN Rail Power Supply user manual Models 503549, 503556 & 503563 INT-503549/503556/503563-UM-0208-01 Thank you for purchasing the INTELLINET NETWORK SOLUTIONS DIN Rail Power Supply, Model 503549 (45 W
More information40 & 60 Watt Models. Low Leakage Current. EN61000 Compliant. Single & Multiple Outputs. Cover Kits Available
ECM40-60 40 & 60 Watt Models Small Size 2.0 x 4.0 x 1.2 Low Leakage Current Industrial & Medical Approvals Full Load Available Convection Cooled Wide Operating Temperature 0 C to +70 C Level B Conducted
More informationIntrinsically Safe Explosion Proof Barriers
Safety Intrinsically Safe Explosion Proof For more information on this product family, visit our website. Additional resources include: New and updated product information Downloadable software demos &
More informationRTE Series Analog Timers. UL Listed File No. E kPa to 110kPa (Operating), 70kPa to 110kPa (Transport)
Analog Key features of the RE series include: 0 time ranges and 0 timing functions ime delays up to 600 hours Space-saving package High repeat accuracy of ± 0.% ON and timing LED indicators Standard 8-
More informationKUANTECH (SHEN ZHEN) COMPANY LIMITED KSAFD W1UK
1 GENERAL... 2 1.1 Description... 2 2 INPUT REQUIREMENTS... 2 2.1 Input Conditions... 2 2.2 AC Inrush Current... 2 3 OUTPUT REQUIREMENTS... 2 4 MECHANICAL... 3 4.1 Enclosure And Layout... 3 4.2 Input and
More informationStandards VDE: EN60950; UL1950; C-UL: CSA C22.2 No.234; IEC950; VDE0805
AC/DC Power Supply Multi-output Wide range input for world-wide use (85 264 Vac). This series is a 3ch output model. Features Wide input voltage range: 85-264Vac 110-370Vdc High efficiency & reliability
More informationABL1REM Main. Rated power in W. Power supply output current V. <= 100 Aat 230 V AC. 2.5 Aat 240 V
Product datasheet Characteristics ABL1REM24062 Complementary Input voltage limits Network frequency Inrush current Main Cos phi 0.65 Range of product Product or component type Power supply type Rated power
More informationTimers NEW DESIGN! RTE Series. RTE Series Analog Timers
RE Series imers RE Series Analog imers NEW DESIN! Key features of the RE series include: 0 time ranges and 0 timing functions ime delays up to 600 hours Space-saving package High repeat accuracy of ± 0.%
More informationSafety Control. FS1A Multi-function Safety Relay. Optional Parts. Connecting Tool. Marked Cable Tie. DIN Rail BNDN1000 Aluminum, 1m 35mm wide
Multi-function Relay Key features: No programming required. Configuration complete by turning on a logic switch A safety circuit can be configured easily just by selecting a logic from eight preprogrammed
More informationABL8REM24030 regulated SMPS - 1 or 2-phase V AC - 24 V - 3 A
Characteristics regulated SMPS - 1 or 2-phase - 100..240 V AC - 24 V - 3 A Product availability : Stock - Normally stocked in distribution facility Price* : 195.00 USD Main Range of product Product or
More informationSafety Control. FS1A Multi-function Safety Relay. Optional Parts. Marked Cable Tie. DIN Rail BNDN1000 Aluminum, 1m 35mm wide
Control Multi-function Relay Key features: No programming required. Configuration complete by turning on a logic switch A safety circuit can be configured easily just by selecting a logic from eight preprogrammed
More informationSwitching Power Supply S82G. Ordering Information. Dependable Power Supply for Demanding Industrial Applications
Switching Power Supply Dependable Power Supply for Demanding Industrial Applications Power rating range from 30 to 0 W Wide range of output voltage: 5, 12,, and 24 V Field-selectable input voltage 120
More informationTypical Input current at 1.15A 0.65A 60 Watt 24VDC / 2.5A. 1.84A 1.0A 120 Watt 24VDC / 5.0A
SmartPower TM The Autotech SmartPower is a DC switching power supply with 24V output Voltage. This user friendly power supply has two 7-segment LED displays for voltage and current monitoring. This DC
More informationABL8MEM12020 regulated SMPS - 1 or 2-phase V AC - 12 V - 2 A
Characteristics regulated SMPS - 1 or 2-phase - 100..240 V AC - 12 V - 2 A Main Range of product Product or component type Power supply type Input voltage Output voltage Rated power in W Input protection
More informationKEPCO GIVES YOU ZERO-UP PROGRAMMABILITY IN AN AFFORDABLE POWER MODULE
146-1915 More than switch mode boxes with wide-range a-c/d-c input power factor correction and current-share capacity... KEPCO GIVES YOU ZERO-UP PROGRAMMABILITY IN AN AFFORDABLE POWER MODULE RKW 300W 92
More informationRelays & Sockets. RSC Series. RSC Series Solid State Relays. Part Number Selection Specifications
RSC Series RSC Series Solid State Relays Key features of the RSC series include: Slim design allows for DIN rail or panel mounting Built-in heat sink maximizes current output capability Epoxy-free design
More informationPower Supplies GLX40 GLX50 GLX60 GLX110-B GLX110-C GLX120 GLX140-C GLX140-CF GLX150-C GLX17Q-C GLX17S-C GLX200 GLX250-CEF GLX250-CF
3 Power Supplies GL Series: Single & Multi Output Switchers The new GL series provides a broad range of AC/DC power supply solutions that covers power ratings from 25 watts to 500 watts for use in various
More informationSwitch Mode Power Supply
Switch Mode Power Supply S8JX (/0/100/10-W Models) Compact Power Supply Compliant with Global Standards Output voltages of V, 12 V, and 2 V are available for between to 10 W capacity (100 W, 10 W: 2-V
More informationUltra-small U-shaped Micro Photoelectric Sensor. Extremely small size enables space saving!! 12 mm in
1 Ultra-small Micro Photoelectric PM- SERIES Related Information General terms and conditions... F-17 Glossary of terms / General precautions... P.19~ / P.10 Amplifier Built-in selection guide... P.1~
More informationT imers Timers Selection Guide Timing Diagrams Overview RTE Series Analog Timers Instructions onlinecomponents.com IDEC.
Industrial Automation Catalog Section - U906 imers Selection uide iming Diagrams Overview RE Series Analog imers Instructions imers For up-to-date information, or to request a full copy of this catalog,
More information500Watts Medical Single Output
FEATURES Medical 60601-1 3 rd Edition approved U-Channel, End fan and Top fan types available Optional high efficiency OR-ing FET diode Current share function 2 year warranty ELECTRICAL SPECIFICATIONS
More informationRemote I/O Unit with Connectors for Light Curtain CC-Link Safety System. panasonic.net/id/pidsx/global
715 LIGHT CURTAINS / USE Remote I/O Unit with Connectors for Light Curtain CC-Link System General terms and conditions... F-7 Related Information... P.703~ SF4B... P.565~ General precautions... P.1501
More informationBulletin 700-SH Solid-State Relays. Overview/Product Selection. Bulletin 700-SH. Product Selection
Overview/Product Selection Bulletin 700-SH 40 A (resistive) Max. Continuous (Output) Current with Heat Sink 264V AC or 528V AC Max. Voltage Range Options 5 24V DC, 100 120V AC, 200 240V AC Control Input
More informationS82J (10/25/50/100/150/300/600-W Models) CSM_S82J_DS_E_3_1
Switch Mode Power Supply (10/25/50/100/150/300/600-W Models) CSM DS_E_3_1 Low-cost Global Power Supply with CE Marking Safety standards: UL: UL508 (Class 2), No.60950-1, cul: CSA C22.2 No. 14 (Class 2),
More informationGLX40 GLX50 UL EN GLX60 GLX110-B GLX110-C GLX200 GLX140-C GLX140-CF GLX150-C GLX17Q-C GLX17S-C GLX250-CEF GLX250-CF
Power Supplies GL Series: Single & Multi Output Switchers The new GL series provides a broad range of AC/DC power supply solutions that covers power ratings from 25 watts to 500 watts for use in various
More informationSpecification For 90 Watts Adapter Power Supply Model No: ADB002 Customer ID: 000G Revision: 4.0
Specification For 90 Watts Adapter Power Supply Model No: ADB002 Customer ID: 000G Revision: 4.0 Prepared By: Terry Liou Approved By: Jacky Chi PAGE 1 E. C. List 1.0 Original 2.0 Modify 8.3 Weight 3.0
More informationSeries AME25-JZ 25 Watt AC-DC / DC-DC Converter
FEATURES: Click on Series name for product info on aimtec.com Series AME-JZ I/O Isolation 000VAC Low Ripple and Noise Operating Temp: -0 C to +70 C Over Voltage Protection Over current Protection Up to
More informationPower Supplies V7-T6-2 V7-T6-4 V7-T6-10 V7-T6-16 V7-T6-36 V7-T6-39 V7-T6-43
Power Supplies Power Supplies.1 General Purpose and Sensor Power Supplies Product Selection Guide................................... PSL Series.............................................. PSC Series..............................................
More informationABL4RSM24050 regulated SMPS - 1 or 2 phase V AC - 24 V - 5A
Characteristics regulated SMPS - 1 or 2 phase - 120..230 V AC - 24 V - 5A Complementary Input voltage limits Network frequency Inrush current Main Range of product Product or component type Power supply
More informationABL8BBU24400 battery control module V DC - 24 V - 40 A - for regulated SMPS
Characteristics battery control module - 24..28.8 V DC - 24 V - 40 A - for regulated SMPS Main Range of product Product or component type Input voltage Output voltage Maximum output current Complementary
More informationSeries AME5-CJZ 5 Watt AC-DC / DC-DC Converter
Click on Series name for product info on aimtec.com FEATURES: I/O Isolation 000V Continuous Short circuit protection Operating Temp: -2 C to 0 C Energy Star compliant Input: -26V, -6Hz, or 20-0VDC pact
More informationPower Supply. Users Guide PRODUCT MANUAL. WESTELL.COM Westell Technologies MNL rd
PRODUCT MANUAL Power Supply Westell Technologies. 960-1152-MNL rd DISCLAIMER All information and statements contained herein are accurate to the best of Westell Technologies knowledge. Westell Technologies
More informationAC-DC POWER SUPPLIES UNIVERSAL INPUT, 65 WATT MEDICAL APPLICATIONS MUI65 SERIES
AC-DC POWER SUPPLIES UNIVERSAL INPUT, 65 WATT MEDICAL APPLICATIONS 2MOPP Medical FEATURES Universal Input Range Operating Temperature Range: -25º to 80ºC (with derating) Compact Package: 2.00 3.00 1.16
More informationConforms to VDE0435/2021 C/250, VDE0110, VDE0106/P100 Conforms to EN , pren
Solid-state Power OFF-delay Timer II DIN 22.5-mm Solid-state Power OFF-delay Timer High immunity to invertor noise. Long power OFF-delay times; S-series: up to 12 seconds, L-series: up to 120 seconds.
More informationVP ELECTRONIQUE MASSY - Tel
KEY FEATURES Switching Power Module for PCB Mountable Fully Encapsulated Plastic Case Universal Input Range 90-264VAC, 47-440 Hz Regulated Output Low Ripple and Noise Screw Terminal For Optional CE, UL,
More informationABL8RPS24100 regulated SMPS - 1 or 2-phase V - 24 V - 10 A
Characteristics regulated SMPS - 1 or 2-phase - 100..500 V - 24 V - 10 A Main Range of product Product or component type Power supply type Input voltage Output voltage Rated power in W Jun 27, 2018 Phaseo
More informationInstallation Instructions
Installation Instructions (Cat. No. 1794-PS1) 1 2 3 4 5 7 6 Component Identification 1 Supply module 1794-PS1 2 Indicator 3 120/230V ac ground 4 120/230V ac common L2/N connections 5 120/230V ac power
More informationModel Number Structure
Solid State Relays with Failure Detection Function G3PC CSM_G3PC_DS_E_1_1 Refer to Safety Precautions for All Solid State Relays. Detects failures in SSR used for heater temperature control and simultaneously
More informationRipple & Noise (max) (See Note 2) 5V output: 100mVp-p; 12V - 27V outputs: 150mVp-p; 48V output: 200mVp-p
FEATURES 3 Year Warranty 100% Full Load Burn-In Tested Universal AC Input / Full Range Built-In Remote Sense Function Built-In Remote ON/OFF Control Current Sharing up to 2000W (3+1) Forced Air Cooling
More informationMillenium II +: general characteristics
Millenium II +: general characteristics Starter kit Blind Temperature sensors Special starter kits Bare board Power supply Level detection Local extensions Accessories Standard Expandable Adjacent extensions
More informationABL8WPS24400 regulated SMPS - 3-phase V - 24 V - 40 A
Characteristics regulated SMPS - 3-phase - 380..500 V - 24 V - 40 A Main Range of product Product or component type Power supply type Input voltage Output voltage Rated power in W Jan 11, 2018 Phaseo Power
More informationECF40 Series. 40 Watts. AC-DC Power Supplies. Models & Ratings. Mechanical Details
40 Watts 40 W Convection Rating 1.5 by 3 Footprint Low 1.1 Profile High Efficiency Medical and ITE pprovals High Power Density Less than 0.15 W No Load Input Power 3 Year Warranty The ECF40 series is designed
More informationSTBEHC3020KC counter kit STB - 1 CH Hz - 2 I
Characteristics counter kit STB - 1 CH - 0..40000 Hz - 2 I Main Range of product Product or component type Number of channels 1 Complementary Kit composition Counting input number 2 Counting frequency
More informationABL1REM24062 regulated SMPS - single phase V input - 24 V output W
Characteristics regulated SMPS - single phase - 100..240 V input - 24 V output - 150 W Product availability : Stock - Normally stocked in distribution facility Price* : 143.00 USD Main Range of product
More information120 WATT FLEX ATX TYPE WITH ACTIVE PFC
120 WATT FLEX ATX TYPE WITH ACTIVE PFC FXA120-W-F SERIES GENERAL SPECIFICATION This specification describes the performance characteristics of a grounded, with active PFC function, single phase, 120 watts,
More informationMODEL: M5DY SEN TRONIC AG CURRENT LOOP SUPPLY. [2] POWER INPUT AC Power M: V AC (Operational voltage range V, Hz)
Super-mini Terminal Block Signal Conditioners M5-UNIT CURRENT LOOP SUPPLY Functions & Features Powering a 0 ma DC current loop Applicable to smart transmitters Isolation between the input and output Fast
More informationABL8BBU24200 battery control module V DC - 24 V - 20 A - for regulated SMPS
Characteristics battery control module - 24..28.8 V DC - 24 V - 20 A - for regulated SMPS Main Range of product Product or component type Input voltage Output voltage Maximum output current Phaseo Battery
More informationDDR-120 series. 120W DIN Rail Type DC-DC Converter
DIN Rail Type DC-DC Converter + is a DIN Rail type DC-DC converter with main features including DIN rail-type easy installation, : DIN Rail Type DC-DC Converter SPECIFICATION MODEL OUTPUT INPUT PROTECTION
More informationTimers. GT5Y Series ON Delay Timers. ±3% maximum (over 10 to 50 C, reference temperature 20 C) Setting Error. ±10% maximum
GT5Y GT5Y Series ON Delay Key features: 4PDT, 3A or DPDT, 5A contacts 4 time ranges Repeat error ±0.2% maximum Control settings by hand or screwdriver Power ON and timing out LED indicators Uses the same
More informationNote: Each relay to be mounted must incorporate a coil that has proper specifications within the maximum rated voltage range.
I/O Block Base G7A Reduces Wiring while Providing I/O Flexibility Mount I/O relays and I/O SSRs freely. Electric-shock preventive (finger-touch protection) terminal block incorporated conforming to VDE
More informationMPU-120S Series. Single Output, 180W Compact, U-Channel AC/DC Power Supplies. Key Features:
MPU-120S Series Single, 180W Compact, U-Channel AC/DC Power Supplies Key Features: 180W Power Universal 90-264 AC Power Factor Correction EN 60950 Approved Compact U-Channel Five Single Models Meets EN
More informationChrome DIN Rail Power Supply 12V 9.96W 1 Phase (Class II & NEC Class 2) / DRC-12V10W1A
Highlights & Features Protection Class II, Double Isolation (No Earth connection is required) Universal AC input voltage and full power up to 55 C Power will not de-rate for the entire input voltage range
More informationGSP750 Series. 750 Watts. AC-DC Power Supplies. Models & Ratings. Input
C-DC Power Supplies 750 Watts 900 W Peak Power Rating for 100 ms Universal 80-264 VC Input IT & Medical Safety pprovals 1.0 W Standby Power -40 C to +70 C Operation Remote On/Off 5 V/3 Standby Output 3
More informationControl relays. K mini-control relays. Conforming to standards IEC/EN , , NF C , VDE 0660 UL, CSA, DEMKO, NEMKO, SEMKO
Characteristics Environment Conforming to standards IEC/EN 0947-1, 0947-5-1, NF C 3-140, VDE 00 Approvals UL, CSA, DEMKO, NEMKO, SEMKO Vertical axis Horizontal axis Operating position 180 Without derating
More informationModel No. ( Single Output ) ATC-3.3S ATC-5S ATC-12S ATC-15S ATC-24S Max Output Wattage (W) 10W 10W 10W 10W 10W VAC or VDC
KEY FEATURES Switching Power Module for PCB Mountable Fully Encapsulated Plastic Case Universal Input Range 90-264VAC, 47-440 Hz Regulated Output Low Ripple and Noise Screw Terminal For Optional CE, UL,
More informationOTB1E0DM9LP I/O distributed module OTB - Ethernet TCP/IP m
Characteristics I/O distributed module OTB - Ethernet TCP/IP - 0..100 m Main Range of product Product or component type Integrated connection type Mar 31, 2018 Modicon OTB I/O distributed module Discrete
More informationInstallation Instructions H Series
Installation Instructions H Series ** Important Note Before connecting AC power to the H Series, please verify that the power transformer is correctly terminated as detailed section 6. Failure to do so
More informationMagnetic and Hydraulic-Magnetic Circuit Breaker 8340-F...
Magnetic and Hydraulic-Magnetic Circuit Breaker 830-F... Description Single and multipole magnetic circuit breakers with trip-free mechanism and toggle actuation. A choice of fast magnetic only or hydraulically
More informationMagnetic and Hydraulic-Magnetic Circuit Breaker 8340-F...
Description Single and multipole magnetic circuit breakers with trip-free mechanism and toggle actuation. A choice of fast magnetic only or hydraulically delayed switching characteristics (S-type MO or
More informationABL8MEM24006 regulated SMPS - 1 or 2-phase V AC - 24 V A
Characteristics regulated SMPS - 1 or 2-phase - 100..240 V AC - 24 V - 0.6 A Complementary Input voltage limits Network frequency Inrush current Main Range of product Product or component type Power supply
More informationModel Number Structure
Solid State Relays with Failure Detection Function G3PC Detects failures in SSR used for heater temperature control and simultaneously outputs alarm signal. This SSR supports the safe design of heater
More informationABL7RM24025 regulated SMPS with auto reset - 1 or 2-phase V AC - 24 V A
Characteristics regulated SMPS with auto reset - 1 or 2-phase - 100...240 V AC - 24 V - 2.5 A Product availability : Stock - Normally stocked in distribution facility Price* : 184.00 USD Main Range of
More informationDeltaV Bulk Power Supplies
DeltaV Distributed Control System Product Data Sheet DeltaV Bulk Power Supplies DeltaV 5 A, 10A, 20 A, 40 A Bulk Power Supplies. DeltaV 20 A, 40 A and 80 A Bulk Power Supply Redundancy Modules. Easy to
More informationTWDLMDA20DTK extendable PLC base Twido 24 V - 12 I 24 V DC - 8 O solid state
Characteristics extendable PLC base Twido 24 V - 12 I 24 V DC - 8 O solid state Main Range of product Product or component type Discrete I/O number 20 Discrete input number 12 Discrete input logic Discrete
More informationSPECIFICATIONS. Input Output Agency Approvals 0 ~ 62.5A. toll-free (603)
Technical Data Sheet 750 Watt, 12 Volt, Single Output Power Supply With PFC, Voltage & Current Trim Functions UNIT CODE PS-RSP 750-12 DESCRIPTION 750 Watt 12 Volt, Single Output Power Supply with PFC plus
More informationG3PC. Model Number Structure. Solid State Relays with Failure Detection Function. Model Number Legend
Solid State Relays with Failure Detection Function G3PC Refer to Warranty and Application Considerations (page 1), Safety Precautions (page 4), and Technical and Safety Information (page 6). Detects failures
More informationSeries AMEL10-MJZ 10 Watt AC-DC / DC-DC Converter
Click on Series name for product info on aimtec.com Models Single output Model Input Voltage (VAC/Hz) FEATURES: Input Voltage (VDC) Max Output wattage (W) Output Voltage (V) Output Current max (A) Maximum
More informationModel Number Structure
Solid State Relays CSM DS_E_3_1 Compact, Low-cost, SSR Switching 5 to 20 A Wide load voltage range: 75 to 264 VAC. Both 100-V and 200-V loads can be handled with the same model. Dedicated, compact aluminum
More informationSolid-state Timer H3YN
Solid-state Timer H3YN Miniature Timer with Multiple Time Ranges and Multiple Operating Modes Minimizes stock. Pin configuration compatible with MY Power Relay. Standard multiple operating modes and multiple
More informationChrome DIN Rail Power Supply 5V 7.5W 1 Phase (Class II & NEC Class 2) / DRC-5V10W1AZ
Highlights & Features Protection Class II, Double Isolation (No Earth connection is required) Universal AC input voltage and full power up to 55 C Power will not de-rate for the entire input voltage range
More informationTimers. GT3W Series Dual Time Range Timers. 250V AC/150V DC Time Range. 1: 0.1sec to 6 hours, 3: 0.1sec to 300 hours
GT3W Key features: Sequential start, sequential interval, on-delay, recycler, and interval ON timing functions 2 time settings in one timer 8 selectable operation modes on each model Mountable in sockets
More informationPower Supplies V7-T6-2 V7-T6-3 V7-T6-22 V7-T6-25 V7-T6-29
Power Supply.1 General Purpose and Sensor Product Selection Guide................................... PSG Series.............................................. ELC Series..............................................
More informationSimple but elegant look and ease of installation make it ideal for various industrial applications.
This LDD240-WU DC/DC converter is the optimal response to the applications where compactness and high reliability are requested. It is isolated and offers a wide range of input and output voltages. Simple
More informationThermal-Magnetic Circuit Breaker 2216-S
Thermal-Magnetic Circuit Breaker 226-S Description One and two pole thermal-magnetic circuit breaker in compact design with slide actuator, trip-free mechanism, various trip characteristics and optional
More informationChrome Class II DIN Rail Power Supply 24V 10W 1 Phase (NEC Class 2 & Household) / DRC-24V10W1HZ
Highlights & Features Protection Class II, Double Isolation (No Earth connection is required) Household appliance approvals IEC/EN 60335-1 4kV Electrical Fast Transient / Burst Universal AC input voltage
More information(Applicable output load) to 264 (see note 2) (see note 1) (2Aat75to264VAC) G3R-202SLN-US PCB Yes 2 A at 100 to 120 VDC. (2 A at 75 to 132 VDC)
Solid-state Relay Compact SSRs Ideal for Built-in Applications Vertical, compact SSRs with an operation indicator offered in versatile variations. Can be mounted side by side with an electromagnetic relay
More informationSwitch Mode Power Supply
New Product Switch Mode Power Supply S8JX (15/35/50/100/150/300/600-W Models) Low-profile Power Supply to Help Reduce Panel Depth Easy : Bracket provided as a standard feature. (except for DIN Rail-mounting
More information