Parts Lists. www MK-Electronic de. Section. In this chapter... Serial Number Format Using the Parts List Xerox Supplies

Transcription

1 Parts Lists In this chapter... Serial Number Format Using the Parts List Xerox Supplies Section 9

2 Serial Number Format Changes to Xerox products are made to accommodate improved components as they become available. It is important when ordering parts to include the following information: Component's part number Product type or model number Serial number of the printer Serial numbering. Particular fields in the serial number indicate the modification level of the printer, the date of its manufacture and the sequence number of the printer produced on that day. The serial number is coded as follows: The text S/N followed by the serial number in the barcode. The barcode does not include a field identifier. The nine digit serial number is based on the following format: PPPRSSSSS. R - Single digit numeric revision digit. To be rolled when a major product change occurs. Initiated with a change request. SSSSS - Five digit numeric serial number. Serial Number Example: RPC453072: 4 = Revision level = Serial number 9-2 WorkCentre C2424 Service Manual

3 Using the Parts List 1. No.: The callout number from the exploded part diagram. 2. Part Number: The material part number used to order specific parts. 3. Qty: This number represents the parts per printer, not the number of parts supplied in the actual part order. 4. Name/Description: Details the name of the part to be ordered and the number of parts supplied per order. 5. Parts identified throughout this manual are referenced PL#.#. For example, PL3.10 means the part is item 10 of Parts List A black triangle preceding a number followed by a parenthetical statement in an illustrated parts list means the item is a parent assembly, made up of the individual parts called out in parentheses. 7. The notation with X~Y following a part name indicates an assembly that is made up of components X through Y. For example, 1 (with 2~4) means part 1 consists of part 2, part 3, and part An asterisk (*) following a part name indicates the page contains a note about this part. 9. The notation (NS) next to a part indicates that particular part is not spared, but contained in a kit or major assembly. 10. The notation J1<>J2 and P2 is attached to a wire harness. It indicates that connector Jack 1 is attached to one end of the wire harness and connector J2 is attached to the other end that is plugged into P2. Note Only parts showing part numbers are available for support. Parts not showing part numbers are available on the parent assembly. Legend: Identifier C E KL S Meaning C-ring E-ring KL-clip Screw Parts Lists 9-3

4 Covers PL 1.11 (With 8-12) PL 1.15 (With 13-19) s WorkCentre C2424 Service Manual

5 Parts List 1.0 Covers No. Name/Description Qty Part Number 1 Front Door MPT ASM Front Door Stay Retainer (w/clip) Clip (part of PL 1.2) 2 4 Hinge Pins, Front Door Front Door Stay with Spring Lower Paper Tray (Output Paper Tray) 1 050K Left Side Cover ASM 1 802E Scanner Hinge 1 003K Control Panel (Control Panel Overlays not included) 1 802K ASM, Lamp 1 122K Scanner Assembly (includes PL 1.8, 1.9, 1.10, 1.11, 1.12) Control Panel Overlays not included 1 109K Upper Housing (including platen glass) 1 802K DADF Front Cover 1 802K DADF Upper Cover 1 802K Duplex Automatic Document Feeder Assembly (includes PL 1.13, 1.14, 1.15, 1.16, 1.17, 1.18, 1.19) 1 004K DADF Input Tray 1 050K DADF Pick Roller and Pad Kit 1 604K Separator Pad (part of PL 1.17) 1 19 DADF Hinge 1 003K Rear Cover 1 802E Right Side Cover ASM 1 802K I/O Access Cover (Interface Cover) 1 802E DM Access Cover (Maintenance Kit / Side Door) 1 802E Waste Tray 1 109R Waste Tray Cover Maintenance Kit (Drum) Standard Capacity Maintenance Kit (Drum) Extended Capacity 1 108R R Scanner Calibration Page 1 109K01910 Parts Lists 9-5

6 Imaging s WorkCentre C2424 Service Manual

7 Parts List 2.0 Imaging No. Name/Description Qty Part Number 1 Ink Loader Assembly and Door Printhead Assembly Drum Assembly Belt, Y-Axis Drum Printhead Wiper Belt, Wiper Drive Purge Pressure Pump Left Printhead Restraint Right Printhead Restraint Transfix Camshaft Assembly Drum Maintenance Camshaft Assembly Stripper Carriage Assembly Transfix Roller 1 022E Y-Axis Tension Spring Transfix Load Module Drum Maintenance Pivot Plate Assembly Preheater and Deskew Assembly Transfix Arm Assembly X-Axis Bias Spring Hook X-Axis Roll Adjuster Spring X-Axis Bias Spring, (Printhead) Parts Lists 9-7

8 Paper Path s WorkCentre C2424 Service Manual

9 Parts List 3.0 Paper Path No. Name/Description Qty Part Number 1 Inner Simplex Guide Lower Inner Duplex Guide Take Away Roller Duplex Roller Upper Duplex Paper Guide with Solenoid Outer Duplex Paper Guide with Sensors (Safety Interlocks) Exit Module Assembly (MEP) Spring, Carriage 2 809E Spring, Carriage Roller 4 809E Pulley, MEP (Exit Module) 4 020E Belt, MEP (Exit Module) 2 023E Roller, Idler, Exit 1 022E Lower Exit Guide Assembly 1 038K Printer Stabilizer 1 674E Sheet Feeder (HCF) Stabilizer 1 674E Sheet Feeder (HCF) with Tray Sheet Tray, Adjustable to Legal Pick Assembly and Retard Roller Kit Separator Pad Kit Parts Lists 9-9

10 Motors, Gears, Solenoids, Clutches, Sensors, Fans and Backframe s WorkCentre C2424 Service Manual

11 Parts List 4.0 Motors, Gears, Solenoids, Clutches, and Fans No. Name/Description Qty Part Number 1 ASM, Motor (DADF) 1 127K DADF Belt Kit 1 604K Fan, (Scanner) Power Supply, Cooling 1 105E Electric Clutch, Wiper X-Axis Motor Assembly Drum Cooling Fan Gearbox and Motor, Process Drive MEP (Drive) Motor 1 127K MEP (Elevator) Motor 127E Tray Lift Motor Kit Motor Assembly, Y-Axis (Drive) Pick Solenoid, Tray Compound Gear, Head Tilt Gearbox, Media Drive with 2 Clutches (Electronics Module) E-Can Cooling Fan 1 127E15010 Parts Lists 9-11

12 Electronics Module, Circuit Boards and Cables s WorkCentre C2424 Service Manual

13 Parts List 5.0 Circuit Boards No. Name/Description Qty Part Number 1 PCBA, Malibu MEP (Exit Module Board) 1 960K Power Supply, Scanner 1 105E Cable, Wave Amp Signal Wave Amp Board Electronics Module Stripped (no RAM, NVRAM, or Configuration Card) 1 133K Cable, Printhead Interface Hard Drive Assembly 1 121K MB SDRAM 512 MB SDRAM pin NVRAM Configuration Card Programmed 1 537E Cable, ZIF, Wave Amp Drive Cable, Right Side Power Control I/O Board Cable, Combined Right Cable, Scanner PSU to Printer PSU 1 117E Cable, Scanner PSU TI IP, MEP and FAN 1 117E Cable, I/O Board Data Cable, Right Umbilical Drum Heater Relay Board Cable, Front Door Cable, Y-Axis Motor Ground Wiring Harness, Left Side Power Control Cable, Back Frame Assembly - MEP 1 117E Back Frame Assembly (Mechanical) 1 001E79170 Parts Lists 9-13

14 Sensors and Flags (Actuators) s WorkCentre C2424 Service Manual

15 Parts List 6.0 Sensors and Flags (Actuators) No. Name/Description Qty Part Number 1 PCBA, IIT Sensor 1 960K Safety Interlock Switch (Mech) Engine Exit Flag 1 137E Drum Temperature Sensor Assembly Exit Module (MEP) Sensor Assembly Waste Tray Sensor (optical) Sensor Assembly, Paper Tray Optical Sensor (Generic Snap-In) Paper Present Flag Paper Full Sensor Kit 604K Flag, MEP (Exit Module) 1 137E11890 Parts Lists 9-15

16 Xerox Supplies Miscellaneous Kits, Supplies, and Options Description Part Number Mechanical Kit -C2424 (Hardware) DADF/Scanner Hinge screws - M4x12-5 each Scanner PS & MEP Board screws - M4x6-5 each Backframe Cable Clamps - 2 each MEP KL clips - 5mm - 5 each MEP Plastic washers - 2 each Mechanical Kit - Hardware Nut Plate - 2 each 6 mm press nut - 2 each #8 SAE washer - 5 each Thumbscrews - 2 each M4 x 12 delta pt - 5 each M4 x 32, partial thread flanged hex - 5 each M4 x 12, taptite flanged - 5 each ASMO clip, lift motor - 2 each E-ring, bent M6 5 mm - 5 each Bushing 6 mm - 2 each Cable Restraint - 2 each Frame Replace Screw (silver blue tint - 5 each) 604K Cleaning Kit Repackaging Kit Printer Stabilizer HCF (525-Sheet Feeder) Stabilizer Cart Stopper, Retainer Clip, Retainer Scanner Calibration Page Power Cords Description 695K E E E E E K01910 Part Number Cable Assembly, 3,18 AWG, 115 V, 98, 0 L Cable Power EURO 220 V, 99 L Cable Power U.K. 240 V, 96 L Cable Power AUST 240 V, 96 L WorkCentre C2424 Service Manual

17 Power Cords Description Part Number Cable Assembly SWISS 220/240 V, 50 Hz Cable Assembly PWR. DANISH, 250 V Cable Assy PWR, PRC Cable Power, 240 V, ARGENTINA Recommended Tools Description Part Number Torque Screwdriver, Adjust Bit, Screwdriver; 0.25 Hexdrive, T Grease Scanner Calibration Page Routine Maintenance Items and Consumables Description Standard-Capacity Maintenance Kit, WorkCentre C2424 Extended-Capacity Maintenance Kit, WorkCentre C2424 Genuine Xerox Solid Ink 8400 Black (3 sticks) Genuine Xerox Solid Ink 8400 Cyan (3 sticks) Genuine Xerox Solid Ink 8400 Magenta (3 sticks) Genuine Xerox Solid Ink 8400 Yellow (3 sticks) Genuine Xerox Solid Ink 8400 Black (6 sticks) 109K01910 Part Number 108R R R R R R R00664 Rainbow Pack (1 Cyan,1 Magenta,1 Yellow, 1 Black 108R00600 Software and Documentation Description Part Number Setup Guide (poster) Quick Reference Guide World Kit 650K23450 Parts Lists 9-17

18 Software and Documentation Description Overlay Kit, French Overlay Kit, Italian Overlay Kit, German Part Number 650K K K24040 Overlay Kit, Spanish 650K24050 Overlay Kit, Dutch Overlay Kit, Swedish Overlay Kit, Brazilian-Portuguese Overlay Kit, Russian Service Manual 650K K K K E13990 Software CD-ROM User Documentation CD-ROM WorkCentre C2424 Service Manual